At present, the main work of electron optical system CAD is solving equations and calculating mumerical values. However, the design perhaps needs more inference and expertise than numerical calculations because the st...At present, the main work of electron optical system CAD is solving equations and calculating mumerical values. However, the design perhaps needs more inference and expertise than numerical calculations because the structure of electron lens system is complicated. In this paper, a primary expert system is applied to design the electron lens system intelligently. This expert system is combined with SEU-3D program which is used to simulate the electron optical system to optimize the electron lens systems. In spite of this, the expert system which is established in this paper can also be used to diagnose the electron lens system. Although the knowledge base is small and rules are not abundant, this paper has used this system to obtain some very useful results. The initial success with this system suggests that further work need to be done whether more rules and knowledge will be added to extend the ability of expert system.展开更多
During the design process of Blu-ray disc optical pick-up （BD OPU）, the optical system and the collimator lens design is especially important. This paper designs an optical system and some lenses for＇the BD OPU, in...During the design process of Blu-ray disc optical pick-up （BD OPU）, the optical system and the collimator lens design is especially important. This paper designs an optical system and some lenses for＇the BD OPU, including collimator lens, beam shaping lens for laser beam shaping, and cylinder lens for signal detecting. In this OPU, we use a triplet lens to collimate the laser beam. At the same time, we build a series of assembly jigs to make sure that each lens can be put into the OPU basement properly. At last, we get the reading spot image and S-curve photo of OPU, which can be used to read Blu-ray disc （BD）.展开更多
The compound diffractive telescope is a novel space optical system which combines the structure of compound eyes with diffractive optics and so it has a lighter weight, a wider field of view （FOV）, a lower cost as w...The compound diffractive telescope is a novel space optical system which combines the structure of compound eyes with diffractive optics and so it has a lighter weight, a wider field of view （FOV）, a lower cost as well as looser fabrication tolerance. In this paper, the design of a compound diffractive telescope composed of one primary lens and twenty-one eyepieces is introduced. Then the influence of diffraction orders on the performance of the system is analysed. A modified phase function model of diffractive optics is proposed to analyse the modulation transfer function （MTF） curves for 0° FOV, which provides a more accurate prediction of the performance of the system. In addition, an optimized mechanism is also proposed to suppress stray light. The star image and resolution tests show that the system can achieve diffraction limit imaging within ±2° of FOV and 4-4 mm of eccentricity. Finally, a series of pictures of an object are taken from different channels, and the splicing of pictures from adjacent FOVs is demonstrated. In summary, the designed system has been proved to have great potential applications.展开更多
We present a freeform lens for application to light-emitting diodes （LED） road lighting. We propose a simple source-target luminous intensity mapping method based on Snell＇s law and geometric-optics analysis. We ca...We present a freeform lens for application to light-emitting diodes （LED） road lighting. We propose a simple source-target luminous intensity mapping method based on Snell＇s law and geometric-optics analysis. We calculated different contours of cross-sections to construct a freeform lens with a smooth surface. The computer simulation results show that the lighting performance of a single freeform lens is not sufficient for road lighting. For the road lamp simulation, we adopted an oval arrangement of freeform lenses on a printed circuit board. In addition, we performed tolerance analysis to determine the tolerance limits of manufacturing and installation errors. A road lamp at a height of 12 m can create rectangular illumination with an area of 40 m ~ 12 m, 69.7% uniformity, and average illuminance of 24.6 lux. This lighting performance can fully comply with the urban road lighting design standard.展开更多
文摘At present, the main work of electron optical system CAD is solving equations and calculating mumerical values. However, the design perhaps needs more inference and expertise than numerical calculations because the structure of electron lens system is complicated. In this paper, a primary expert system is applied to design the electron lens system intelligently. This expert system is combined with SEU-3D program which is used to simulate the electron optical system to optimize the electron lens systems. In spite of this, the expert system which is established in this paper can also be used to diagnose the electron lens system. Although the knowledge base is small and rules are not abundant, this paper has used this system to obtain some very useful results. The initial success with this system suggests that further work need to be done whether more rules and knowledge will be added to extend the ability of expert system.
基金the project cooperated by Optical Memory National Engineering Research Center,Tsinghua University and Philips Investment Co.,Ltd.
文摘During the design process of Blu-ray disc optical pick-up （BD OPU）, the optical system and the collimator lens design is especially important. This paper designs an optical system and some lenses for＇the BD OPU, including collimator lens, beam shaping lens for laser beam shaping, and cylinder lens for signal detecting. In this OPU, we use a triplet lens to collimate the laser beam. At the same time, we build a series of assembly jigs to make sure that each lens can be put into the OPU basement properly. At last, we get the reading spot image and S-curve photo of OPU, which can be used to read Blu-ray disc （BD）.
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2006AA12Z127)the National Natural Science Foundation of China (Grant No. 10704072)the Innovation Program of Chinese Academy of Sciences
文摘The compound diffractive telescope is a novel space optical system which combines the structure of compound eyes with diffractive optics and so it has a lighter weight, a wider field of view （FOV）, a lower cost as well as looser fabrication tolerance. In this paper, the design of a compound diffractive telescope composed of one primary lens and twenty-one eyepieces is introduced. Then the influence of diffraction orders on the performance of the system is analysed. A modified phase function model of diffractive optics is proposed to analyse the modulation transfer function （MTF） curves for 0° FOV, which provides a more accurate prediction of the performance of the system. In addition, an optimized mechanism is also proposed to suppress stray light. The star image and resolution tests show that the system can achieve diffraction limit imaging within ±2° of FOV and 4-4 mm of eccentricity. Finally, a series of pictures of an object are taken from different channels, and the splicing of pictures from adjacent FOVs is demonstrated. In summary, the designed system has been proved to have great potential applications.
文摘We present a freeform lens for application to light-emitting diodes （LED） road lighting. We propose a simple source-target luminous intensity mapping method based on Snell＇s law and geometric-optics analysis. We calculated different contours of cross-sections to construct a freeform lens with a smooth surface. The computer simulation results show that the lighting performance of a single freeform lens is not sufficient for road lighting. For the road lamp simulation, we adopted an oval arrangement of freeform lenses on a printed circuit board. In addition, we performed tolerance analysis to determine the tolerance limits of manufacturing and installation errors. A road lamp at a height of 12 m can create rectangular illumination with an area of 40 m ~ 12 m, 69.7% uniformity, and average illuminance of 24.6 lux. This lighting performance can fully comply with the urban road lighting design standard.
