The linear shaped charge cutting technology is an effective technology for aircraft separation.It can separate invalid components from aircrafts timely to achieve light-weight.Magnesium alloy is the lightest metal mat...The linear shaped charge cutting technology is an effective technology for aircraft separation.It can separate invalid components from aircrafts timely to achieve light-weight.Magnesium alloy is the lightest metal material,and can be used to cast effective light-weight components of an aircraft construction.However,the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank.In response to the demand for the linear separation of magnesium alloys,the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test.The effects of the shaped charge line density,cutting thickness,and mechanical properties on the cutting performance of the alloy are studied.The shaped charge cutting mechanism is analyzed through the notch structure.The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse.The higher the linear density is,the stronger the ability of the linear shaped charge cutter is,and the greater the penetration depth is,which is advantageous.However,the target structure will be damaged when it is too large(e.g.,4.5 g·m^(-1)).Within 12 mm,when the cutting thickness of the target increases,the penetration depth increases.The lower the tensile strength is,the greater the penetration depth is,and the more conducive the penetration depth to the shaped charge cutting is.When the elongation(EL)increases to 12%,the collapse of the target is incomplete and the target cannot be separated.When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa,the EL is less than 6.5%,the cutting thickness is less than 12 mm,and the linear shaped charge cutting of the magnesium alloy can be achieved stably.展开更多
It is inevitable to cut reinforced concrete(RC)appeared in cross passage of city metro by cutting tools when constructing in densely populated area.The previous cutters employed to cut RC are insufficient and easily d...It is inevitable to cut reinforced concrete(RC)appeared in cross passage of city metro by cutting tools when constructing in densely populated area.The previous cutters employed to cut RC are insufficient and easily damaged,so a new polycrystalline diamond compact(PDC)cutter is used to solve this question.Based on the theoretical analysis of cutting mechanism,both circular and tapered PDC cutters with cutting edge angle of 90and negative front rack angle of 10are used to cut RC.The peeling and breaking patterns of cutting concrete are proposed,the nodular and grainy chips are the preferred modes in cutting steel bars.The LS-DYNA is employed to investigate the cutting performance in advance.The simulation results show that the average and peak cutting forces increase with the growth of penetration depth,cutting speed,and roundness,and subsequently the recommended penetration depth less than 1.2 mm is obtained to cut RC due to the existence of steel bars.Moreover,the linear cutting platform is adopted to investigate the force ability and damage state of PDC cutters.It is concluded that the cutting force increases abruptly and fluctuates heavily when cutting the coarse aggregates.The patterns occurred in both numerical and experimental results are generally similar.Notably,the steel bar is pulled out and the PDC cutter is damaged at the penetration depth of 0.8 mm,while a good cut occurs at the penetration depth of 0.3 mm.The tapered PDC cutter with a relatively low cutting force is prone to be broken compared with circular PDC cutter.It is suggested that the circular PDC cutter at the penetration depth of 0.3 mm should be used to cut RC in practical engineering.展开更多
基金the National Natural Science Foundation of China(No.U2037601)。
文摘The linear shaped charge cutting technology is an effective technology for aircraft separation.It can separate invalid components from aircrafts timely to achieve light-weight.Magnesium alloy is the lightest metal material,and can be used to cast effective light-weight components of an aircraft construction.However,the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank.In response to the demand for the linear separation of magnesium alloys,the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test.The effects of the shaped charge line density,cutting thickness,and mechanical properties on the cutting performance of the alloy are studied.The shaped charge cutting mechanism is analyzed through the notch structure.The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse.The higher the linear density is,the stronger the ability of the linear shaped charge cutter is,and the greater the penetration depth is,which is advantageous.However,the target structure will be damaged when it is too large(e.g.,4.5 g·m^(-1)).Within 12 mm,when the cutting thickness of the target increases,the penetration depth increases.The lower the tensile strength is,the greater the penetration depth is,and the more conducive the penetration depth to the shaped charge cutting is.When the elongation(EL)increases to 12%,the collapse of the target is incomplete and the target cannot be separated.When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa,the EL is less than 6.5%,the cutting thickness is less than 12 mm,and the linear shaped charge cutting of the magnesium alloy can be achieved stably.
基金supported by the Shanghai Science and Technology Development Funds(Grant No.20QB1401800)Xuzhou Science and Technology Plan Social Development Key Special Project(Grant No.SHFZZDZX20210017)Yunlong Lake Laboratory of Deep Underground Science and Engineering Project(Grant No.104023006).
文摘It is inevitable to cut reinforced concrete(RC)appeared in cross passage of city metro by cutting tools when constructing in densely populated area.The previous cutters employed to cut RC are insufficient and easily damaged,so a new polycrystalline diamond compact(PDC)cutter is used to solve this question.Based on the theoretical analysis of cutting mechanism,both circular and tapered PDC cutters with cutting edge angle of 90and negative front rack angle of 10are used to cut RC.The peeling and breaking patterns of cutting concrete are proposed,the nodular and grainy chips are the preferred modes in cutting steel bars.The LS-DYNA is employed to investigate the cutting performance in advance.The simulation results show that the average and peak cutting forces increase with the growth of penetration depth,cutting speed,and roundness,and subsequently the recommended penetration depth less than 1.2 mm is obtained to cut RC due to the existence of steel bars.Moreover,the linear cutting platform is adopted to investigate the force ability and damage state of PDC cutters.It is concluded that the cutting force increases abruptly and fluctuates heavily when cutting the coarse aggregates.The patterns occurred in both numerical and experimental results are generally similar.Notably,the steel bar is pulled out and the PDC cutter is damaged at the penetration depth of 0.8 mm,while a good cut occurs at the penetration depth of 0.3 mm.The tapered PDC cutter with a relatively low cutting force is prone to be broken compared with circular PDC cutter.It is suggested that the circular PDC cutter at the penetration depth of 0.3 mm should be used to cut RC in practical engineering.
