Ethylene oligomerization using ZSM-5 zeolite was investigated to study the role of Bronsted acid sites in the formation of higher hydrocarbons. The oligomerization of olefins, dependent on the acidity of ZSM-5 zeolite...Ethylene oligomerization using ZSM-5 zeolite was investigated to study the role of Bronsted acid sites in the formation of higher hydrocarbons. The oligomerization of olefins, dependent on the acidity of ZSM-5 zeolite, is an important step in the conversion of natural gas to liquid fuels. The framework Si/Al ratio reflects the number of potential acid sites and the acid strength of the ZSM-5 catalyst. ZSM-5 with the mole ratio SiO2/Al2O3 equal to 30 was dealuminated for different periods of time according to the acidic ion-exchange method to produce ZSM-5 with various Si/Al ratios. The FT-IR analysis revealed that the integrated framework aluminum band, non-framework aluminum band, and silanol groups areas of the ZSM-5 zeolites decreased after being dealuminated. The performance of the dealuminated zeolite was tested for ethylene oligomerization. The results demonstrated that the dealumination of ZSM-5 led to higher ethylene conversion, but the gasoline selectivity was reduced compared to the performance of a ZSM-5 zeolite. The characterization results revealed the amount of aluminum in the zeolitic framework, the crystallinity of the ZSM-5 zeolite, and the Si/Al ratio affected the formation of Bronsted acid sites. The number of the Bronsted acid sites on the catalyst active sites is important in the olefin conversion to liquid hydrocarbons.展开更多
Techno-economic potentials of thermal and catalytic pyrolysis plants for the conversion of waste plastics to liquid fuels have been widely studied, but it is not obvious which of the two plants is more profitable, as ...Techno-economic potentials of thermal and catalytic pyrolysis plants for the conversion of waste plastics to liquid fuels have been widely studied, but it is not obvious which of the two plants is more profitable, as the existing studies used different assumptions and cost bases in their analyses, thereby making it difficult to compare the economic potentials of the two plants. In this study, industrial-scale thermal and catalytic waste plastics pyrolysis plants were designed and economically analyzed using ASPEN PLUS. Amorphous silica-alumina was considered the optimum catalyst, with 3:1 feed to catalyst ratio. Based on 20,000 tons/year of feed and 20% interest rate, the catalytic plant, having a net present value (NPV) of � million, was found to be economically less attractive than the thermal plant, having the NPV of �.4 million. On the contrary, sensitivity analyses of the two plants at a feed rate of 50,000 tons/year gave rise to a slightly higher NPV for the catalytic plant (� million) than the thermal plant having NPV of � million, thereby making the former more economically attractive for processing large amounts of waste plastics into liquid fuels. Consequently, as the catalytic plant showed a better scale economy and would produce higher quality liquid fuels than the thermal plant, it is recommended for commercialization in Nigeria.展开更多
Highly-efficient oxidation of 5-hydroxymethylfurtural(HMF) to 2,5-furandicarboxylic acid(FDCA) at low temperature with air as the oxidant is still challenging.Herein,inspired by the respirato ry electron transport cha...Highly-efficient oxidation of 5-hydroxymethylfurtural(HMF) to 2,5-furandicarboxylic acid(FDCA) at low temperature with air as the oxidant is still challenging.Herein,inspired by the respirato ry electron transport chain(ETC) of living cells mediated by electron carriers,we constructed artificial ETCs and transformed liquid flow fuel cells(LFFCs) to flexible reactors for efficient oxidation of HMF to produce FDCA under mild conditions.This LFFC reactor employed an electrodeposition modified nickel foam as an anode to promote HMF oxidation and(VO_(2))_(2)SO_(4) as a cathode electron carrier to facilitate the electron transfer to air.The reaction rate could be easily controlled by selecting the anode catalyst,adjusting the external loading and changing the cathodic electron carrier or oxidants.A maximal power density of 44.9 mW cm^(-2) at room temperature was achieved,while for FDCA production,short-circuit condition was preferred to achieve quick transfer of electrons.For a single batch operation with 0.1 M initial HMF,FDCA yield reached 97.1%.By fed-batch operation,FDCA concentration reached 144.5 g L^(-1) with a total yield of 96%.Ni^(2+)/Ni^(3+) redox couple was the active species mediating the electron transfer,while both experimental and DFT calculation results indicated that HMFCA pathway was the preferred reaction mechanism.展开更多
This paper presents the experimental and numerical results for a two stagecombustor capable of achieving flameless combustion with liquid fuels for different thermalheat inputs of 20,30,40 and 60 kW and heat release d...This paper presents the experimental and numerical results for a two stagecombustor capable of achieving flameless combustion with liquid fuels for different thermalheat inputs of 20,30,40 and 60 kW and heat release density of 5-15 MW/m^(3).Combustioncharacteristics and pollutant emissions are studied for three different fuels,kerosene,diesel andgasoline.The influence of droplet diameter on pollutant emissions at all conditions is studied.The fuel and oxidizer are supplied at ambient conditions.The concept of high swirl flows hasbeen adopted to achieve high intemal recirculation rates,residence time and increased dilutionof the fresh reactants in the primary combustion zone,resulting in flameless combustion mode.Air is injected through four tangential injection ports located near the bottom of the combustorand liquid fuel is injected through a centrally mounted pressure swirl injector.Computationalanalysis of the flow features shows that decrease in the exit port diameter of the primarychamber increases the recirculation rate of combustion products and helps in achieving theflameless combustion mode.Based on preliminary computational studies,a 30 mm primarychamber exit pont diameter is chosen for experimental studies.Detailed experimentalinvestigations show that flameless combustion mode was achieved with evenly distributedcombustion reaction zone and unifom temperature distribution in the combustor.Pollutant emissions of CO, NO_(x),C_(x)H_(y) are measured and compared for all operating conditions ofdifferent fuels and different thermal inputs. The acoustic emission levels are reduced by6-8 dB as combustion mode shifts from conventional mode to flameless combustion mode.展开更多
Increased demand for liquid transportation fuels, environmental concerns and depletion of petroleum resources requires the development of efficient conversion technologies for production of second-generation biofuels ...Increased demand for liquid transportation fuels, environmental concerns and depletion of petroleum resources requires the development of efficient conversion technologies for production of second-generation biofuels from non-food resources. Thermochemical approaches hold great potential for conversion of lignocellulosic biomass into liquid fuels. Direct thermochemical processes convert biomass into liquid fuels in one step using heat and catalysts and have many advantages over indirect and biological processes, such as greater feedstock flexibility, integrated conversion of whole biomass, and lower operation costs. Several direct thermochemical processes are employed in the production of liquid biofuels depending on the nature of the feedstock properties: such as fast pyrolysis/liquefaction of lignocellulosic biomass for bio-oil, including upgrading methods, such as catalytic cracking and hydrogenation. Owing to the substantial amount of liquid fuels consumed by vehicular transport, converting biomass into drop-in liquid fuels may reduce the dependence of the fuel market on petroleumbased fuel products. In this review, we also summarize recent progress in technologies for large-scale equipment for direct thermochemical conversion. We focus on the technical aspects critical to commercialization of the technologies for production of liquid fuels from biomass,including feedstock type, cracking catalysts, catalytic cracking mechanisms, catalytic reactors, and biofuel properties. We also discuss future prospects for direct thermochemical conversion in biorefineries for the production of high grade biofuels.展开更多
Green hydrogen is anticipated to play a major role in the decarbonization of the mobility sector.Its chemical storage in CO_(2)-neutral synthetic liquid fuels is advantageous in terms of safety and reliability compare...Green hydrogen is anticipated to play a major role in the decarbonization of the mobility sector.Its chemical storage in CO_(2)-neutral synthetic liquid fuels is advantageous in terms of safety and reliability compared to other hydrogen storage developments,and thus represents a complementary building block to developments in electric and hydrogen mobility for the low-carbon transition in the mobility sector.Its development is especially relevant for transport sectors which will have no alternatives to liquid fuels in the foreseeable future.In this paper,three alternative technological routes for the chemical storage of hydrogen in CO_(2)-neutral synthetic liquid fuels are identified and comparatively evaluated in terms of feedstock potential,product potential,demand for renewable electricity and associated costs,efficiency as well as expected market relevance.While all three routes exhibited similar levels of overall efficiencies,electricity-based liquid fuels in Germany are currently limited by the high cost and limited supply of renewable electricity.In contrast,liquid fuels generated from biogenic waste have a constant supply of biogenic feedstock and are largely independent from the supply and cost of renewable electricity.展开更多
The dependencies of Fischer-Tropsch synthesis liquid hydrocarbon product distribution on operating pressure and temperature have been studied over three potassium-promoted iron catalysts with increasing potassium mola...The dependencies of Fischer-Tropsch synthesis liquid hydrocarbon product distribution on operating pressure and temperature have been studied over three potassium-promoted iron catalysts with increasing potassium molar content. The study followed an experimental planning and the results were analyzed based on surface response methodology. The effects of different operating conditions and potassium contents on the liquid product distribution were compared based on number average carbon number and dispersion. Results showed that high pressures （25 to 30 arm） favored the production of waxes that could be converted into liquid fuels through hydrocracking, while greater direct selectivity towards diesel was favored by low pressure （20 arm） using catalysts with low potassium to iron molar ratios. The liquid product distribution produced using an iron catalyst with high potassium content presented higher number-average number of carbons when compared to the distribution obtained using an iron catalyst with low potassium content.展开更多
Surface/interface engineering of a multimetallic nanostructure with diverse electrocatalytic properties for direct liquid fuel cells is desirable yet challenging.Herein,using visible light,a class of quaternary Pt_(1)...Surface/interface engineering of a multimetallic nanostructure with diverse electrocatalytic properties for direct liquid fuel cells is desirable yet challenging.Herein,using visible light,a class of quaternary Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)ultrathin nanosheets is fabricated and used as high-performance anode electrocatalysts for formic acid-/alcohol-air fuel cells.The modified electronic structure of Pt,enhanced hydroxyl adsorption,and abundant exterior defects afford Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C high intrinsic anodic electrocatalytic activity to boost the power densities of direct formic acid-/methanol-/ethanol-/ethylene glycol-/glycerol-air fuel cells,and the corresponding peak power density of Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C is respectively 129.7,142.3,105.4,124.3,and 128.0 mW cm^(-2),considerably outperforming Pt/C.Operando in situ Fourier transform infrared reflection spectroscopy reveals that formic acid oxidation on Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C occurs via a CO_(2)-free direct pathway.Density functional theory calculations show that the presence of Ag,Bi,and Te in Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)suppresses CO^(*)formation while optimizing dehydrogenation steps and synergistic effect and modified Pt effectively enhance H_(2)O dissociation to improve electrocatalytic performance.This synthesis strategy can be extended to 43 other types of ultrathin multimetallic nanosheets(from ternary to octonary nanosheets),and efficiently capture precious metals(i.e.,Pd,Pt,Rh,Ru,Au,and Ag)from different water sources.展开更多
The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fu...The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.展开更多
The development of advanced air transportation has raised new demands for high-performance liquid hydrocarbon fuels.However,the measurement of fuel properties is time-consuming,cost-intensive,and limited to the operat...The development of advanced air transportation has raised new demands for high-performance liquid hydrocarbon fuels.However,the measurement of fuel properties is time-consuming,cost-intensive,and limited to the operating conditions.The physicochemical properties of aerospace fuels are directly infl uenced by chemical composition.Thus,a thorough investigation should be conducted on the inherent relationship between fuel properties and composition for the design and synthesis of high-grade fuels and the prediction of fuel properties in the future.This work summarized the eff ects of fuel composition and hydrocarbon molecular structure on the fuel physicochemical properties,including density,net heat of combustion(NHOC),low-temperature fl uidity(viscosity and freezing point),fl ash point,and thermal-oxidative stability.Several correlations and predictions of fuel properties from chemical composition were reviewed.Additionally,we correlated the fuel properties with hydrogen/carbon molar ratios(n H/C)and molecular weight(M).The results from the least-square method implicate that the coupling of H/C molar ratio and M is suitable for the estimation of density,NHOC,viscosity and eff ectiveness for the design,manufacture,and evaluation of aviation hydrocarbon fuels.展开更多
A liquid fueled thorium molten salt reactor(TMSR-LF),one of the Generation IV reactors,was designed by the Shanghai Institute of Applied Physics,Chinese Academy of Sciences.This study uses the‘rt code to calculate th...A liquid fueled thorium molten salt reactor(TMSR-LF),one of the Generation IV reactors,was designed by the Shanghai Institute of Applied Physics,Chinese Academy of Sciences.This study uses the‘rt code to calculate the neutron and gamma dose rate distributions around the reactor.Multiple types of tallies and variance reduction techniques were employed to reduce calculation time and obtain convergent calculation results.Based on the calculation and analysis results,the TMSR-LF1 radiation shield with a 60-cm serpentine concrete layer and a 120-cm ordinary concrete layer is able to meet radiation requirements.The gamma dose rate outside the reactor biological shield was 16.1 mSv h-1;this is higher than the neutron dose rate of 3.71×10^(–2)mSv h^(-1).The maximum thermal neutron flux density outside the reactor biological shield was 1.899103 cm^(-2)s^(-1),which was below the 19105 cm^(-2)s^(-1)limit.展开更多
Aerospace aircraft has significantly improved the life quality of human beings and extended the capability of space explosion since its appearance in 1903,in which liquid propellants or fuels provide the key power sou...Aerospace aircraft has significantly improved the life quality of human beings and extended the capability of space explosion since its appearance in 1903,in which liquid propellants or fuels provide the key power source.For jet fuels,its property of energy density plays an important role in determining the flight range,load,and performance of the aircraft.Therefore,the design and fabrication of high-energy-density(HED)fuels attract more and more attention from researchers all over the world.Herein,we briefly introduce the development of liquid jet fuels and HED fuels and demonstrate the future development of HED fuels.To further improve the energy density of fuel,the approaches of design and construction of multi-cyclic and stained molecule structures are proposed.To break through the density limit of hydrocarbon fuels,the addition of energetic nanoparticles in HED fuels to produce nanofluid or gelled fuels may provide a facile and effective method to significantly increase the energy density.This work provides the perspective for the development of HED fuels for advanced aircrafts.展开更多
Direct liquid fuel cells(DLFCs) have received increasing attention because of their high energy densities,instant recharging abilities, simple cell structure, and facile storage and transport. The main challenge for t...Direct liquid fuel cells(DLFCs) have received increasing attention because of their high energy densities,instant recharging abilities, simple cell structure, and facile storage and transport. The main challenge for the commercialization of DLFCs is the high loading requirement of platinum group metals(PGMs) as catalysts. Atomically dispersed catalysts(ADCs) have been brought into recent focus for DLFCs due to their well-defined active sites, high selectivity, maximal atom-utilization, and anti-poisoning property. In this review, we summarized the structure–property relationship for unveiling the underlying mechanisms of ADCs for DLFCs. More specifically, different types of fuels used in DLFCs such as methanol, formic acid,and ethanol were discussed. At last, we highlighted current challenges, research directions, and future outlooks towards the practical application of DLFCs.展开更多
The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active...The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active sites but also by the properties of the interfacial structures at catalytic surfaces. Ionic liquids（ILs）, as a unique class of metal salts with melting point below 100 ℃, present themselves as ideal modulators for manipulations of the interfacial structures. Due to their excellent properties such as good chemical stability, high ionic conductivity, wide electrochemical windows and tunable solvent properties the performance of electrocatalysts can be substantially improved through ILs. In the current minireview, we highlight the critical role of the IL phase at the microenvironments created by the IL, the liquid electrolyte, catalytic nanoparticles and/or support materials, by detailing the promotional effect of IL in electrocatalysis as reaction media, binders, and surface modifiers. Updated exemplary applications of IL in electrocatalysis are given and moreover, the latest developments of IL modified electrocatalysts following the ＂Solid Catalyst with Ionic Liquid Layer（SCILL）＂ concept are presented.展开更多
Direct liquid fuel cells(DLFCs)are proposed to address the problems of high cost and complex storage and transportation of hydrogen in traditional hydrogen-oxygen proton exchange membrane fuel cells.However,present fu...Direct liquid fuel cells(DLFCs)are proposed to address the problems of high cost and complex storage and transportation of hydrogen in traditional hydrogen-oxygen proton exchange membrane fuel cells.However,present fuels of organic small molecules used in DLFCs are restricted to problems of sluggish electrochemical kinetics and easily poisoning of precious metal catalysts.Herein,we demonstrate reduced phosphotungstic acid as a liquid fuel for DLFCs based on its advantages of high chemical and electrochemical stability,high electrochemical activity on common carbon material electrodes,and low permeability through proton exchange membranes.The application of phosphotungstic acid fuel effectively solves the problems of high cost of anode catalysts and serious fuel permeation loss in traditional DLFCs.A phosphotungstic acid fuel cell achieves a peak power density of466 mW cm^(-2)at a cell voltage of 0.42 V and good stability at current densities in the range from 20 to 200 mA cm^(-2).展开更多
Pyrolysis is one of the thermal cracking methods to convert hydrocarbon to liquid fuel.The quantity and quality of the process are dependent on several condition including temperature,reaction time,catalyst,and the ty...Pyrolysis is one of the thermal cracking methods to convert hydrocarbon to liquid fuel.The quantity and quality of the process are dependent on several condition including temperature,reaction time,catalyst,and the type of reactor.Meanwhile,a gasoline fraction was maximum product to be considered in the pyrolisis process.Therefore,this study aims to increase the gasoline fraction in liquid fuel using stepwise pyrolysis with a long bed catalytic reactor downstream(LBCR).The LBCR downstream was equipped with the top and bottom outlet and the fed source was mixed municipal solid waste(MMSW).The activated natural dolomite at 500℃ was used to allow the repetition of the secondary cracking.Also,the reactor temperature was setup at around 200℃-300℃ and the pyrolizer was 400℃.To analyze the gasoline fraction and physical properties of liquid fuel,Gas Chromatography-Mass Spectroscopy(GC-MS)and ASTM standard were employed.The experimental results showed there was a significant increase in the gasoline fraction of liquid fuels compared to using direct catalytic cracking and absence of catalysts.By using a LBCR at 250℃,the liquid fuel obtained at top outlet(TO)and bottom outlet(BO)have 84.08 and 56.94 percent peak area of gasoline fraction(C5-C12),respectively.The average value(TO and BO)of the fraction at 250℃ by LBCR was 70.51 percent peak area and it was increased by about 93.6%and 51.14%compared to without catalyst and direct catalytic,respectively.Furthermore,pyrolytic liquid oils were found to have kinematic viscosity of 2.979 and 0.789 cSt,density of 0.781 and 0.782 g/cm^(3),and flash point<−5℃ for BO-250 and TO-250 liquid fuel,respectively.These results showed BO liquid fuel was comparable to diesel conventional fuel while TO liquid fuel was comparable to gasoline.Evidently,the presence of LBCR made a major contribution to generate multi secondary cracking and to produce more gasoline fraction from mixed MMSW feedstock,as well as to increase the physical properties of liquid fuel.展开更多
The quantities of gas released into the environment during the extraction and processing of crude oil,by flaring,constitute a vast source of mineral wealth which can be used to produce other useful products.The proces...The quantities of gas released into the environment during the extraction and processing of crude oil,by flaring,constitute a vast source of mineral wealth which can be used to produce other useful products.The processes studied in this paper,as alternatives to the above problem,are the ones used in Shell Pearl Qatar project and Oryx GTL project.Both projects produce liquid fuels,mainly naphtha and diesel,in addition to more special fuel such as kerosene.This paper is a feasibility study of a project that makes use of the flare gas from the State of Texas,U.S.A.,as a feedstock to a process similar to either Shell Pearl Qatar project,or Oryx GTL project.The objective of this study is to determine the price range for crude oil over which an investment to similar projects can be profitable.An MS Excel Model was developed in order to perform calculations having as a variable the crude oil price and taking into account all the process and project’s financial data.The results of this model showed that a project similar to Shell Pearl Qatar remains profitable in crude oil price above$57.76/barrel,while a project similar to Oryx GTL remains viable for crude oil price over$31.4/bbl.In the price range$55-$60/barrel,the payout of the corresponding to Shell Pearl Qatar project will be in about 15.2 years and 3.3 years for a project similar to Oryx GTL.Finally,using the financial principles of this study we can apply them to any process in order to determine under what conditions will remain viable.展开更多
Conventional chemical oxidation of aldehydes such as furfural to corresponding acids by molecular oxygen usually needs high pressure to increase the solubility of oxygen in aqueous phase,while electrochemical oxidatio...Conventional chemical oxidation of aldehydes such as furfural to corresponding acids by molecular oxygen usually needs high pressure to increase the solubility of oxygen in aqueous phase,while electrochemical oxidation needs input of external electric energy.Herein,we developed a liquid flow fuel cell(LFFC)system to achieve oxidation of furfural in anode for furoic acid production with co-production of hydrogen gas.By controlling the electron transfer in cathode for reduction of oxygen,efficient generation of electricity or production of H_(2)O_(2)were achieved.Metal oxides especially Ag_(2)O have been screened as the efficient catalyst to promote the oxidation of aldehydes,while liquid redox couples were used for promoting the kinetics of oxygen reduction.A novel alkaline-acidic asymmetric design was also used for anolyte and catholyte,respectively,to promote the efficiency of electron transfer.Such an LFFC system achieves efficient conversion of chemical energy of aldehyde oxidation to electric energy and makes full use the transferred electrons for high-value added products without input of external energy.With(VO_(2))_(2)SO_(4)as the electron carrier in catholyte for four-electron reduction of oxygen,the peak output power density(Pmax)at room temperature reached 261 mW/cm^(2)with furoic acid and H_(2)yields of 90%and 0.10 mol/mol furfural,respectively.With anthraquinone-2-sulfonate(AQS)as the cathodic electron carrier,Pmaxof 60 mW/cm^(2)and furoic acid,H_(2)and H_(2)O_(2)yields of 0.88,0.15 and 0.41 mol/mol furfural were achieved,respectively.A new reaction mechanism on furfural oxidation on Ag_(2)O anode was proposed,referring to one-electron and two-electron reaction pathways depending on the fate of adsorbed hydrogen atom transferred from furfural aldehyde group.展开更多
Hydrocracking catalysis is a controllable route to plastic waste upgrading. However, the mismatched acid site-driven C-C cleavage and C=C hydrogenation process on metal restrict the efficiency and selectivity in conve...Hydrocracking catalysis is a controllable route to plastic waste upgrading. However, the mismatched acid site-driven C-C cleavage and C=C hydrogenation process on metal restrict the efficiency and selectivity in conventional metal/acid bi-functional catalyst. Herein, we introduce Al deficiency in Si-O(H)-Al structural units of Pt/zeolite socony mobil-5 (Pt/ZSM-5) through discharge driven reduction (DR) process to precisely control the ratio of metal to acid, achieving hydrocracking of low-density polyethylene (LDPE) waste at 270 °C with 87.7% conversion and liquid fuel (C5-C21) selectivity of 77.8%. Pair distribution function (PDF) and nuclear magnetic resonance (NMR) spectroscopy demonstrate the partial absent Al sites further resulting short-range local disorder Si-O(H)-Al. Upon pyridine infrared spectroscopy (Py-IR) and CO diffuse reflectance Fourier-transform infrared (CO DRIFT) analysis, the extraction of Al modulates Brønsted acid density of Pt/ZSM-5 with DR process (Pt/Z5DR), improves the interaction between Pt and ZSM-5 support, enhances the cationic of Pt. The metal-acid balance and electron-deficient Pt favor the matching speed of light olefins hydrogenation and the cracking of macromolecule intermediates. Moreover, density functional theory (DFT) calculations identify the thermodynamic stability of Pt/Z5DR and moderate adsorption capability towards light olefins. This work confirms the great potential of precisely controlled molar of metal to acid in metal/zeolite catalysts for LDPE upcycling, providing a viable path for dealing with PE plastic wastes.展开更多
文摘Ethylene oligomerization using ZSM-5 zeolite was investigated to study the role of Bronsted acid sites in the formation of higher hydrocarbons. The oligomerization of olefins, dependent on the acidity of ZSM-5 zeolite, is an important step in the conversion of natural gas to liquid fuels. The framework Si/Al ratio reflects the number of potential acid sites and the acid strength of the ZSM-5 catalyst. ZSM-5 with the mole ratio SiO2/Al2O3 equal to 30 was dealuminated for different periods of time according to the acidic ion-exchange method to produce ZSM-5 with various Si/Al ratios. The FT-IR analysis revealed that the integrated framework aluminum band, non-framework aluminum band, and silanol groups areas of the ZSM-5 zeolites decreased after being dealuminated. The performance of the dealuminated zeolite was tested for ethylene oligomerization. The results demonstrated that the dealumination of ZSM-5 led to higher ethylene conversion, but the gasoline selectivity was reduced compared to the performance of a ZSM-5 zeolite. The characterization results revealed the amount of aluminum in the zeolitic framework, the crystallinity of the ZSM-5 zeolite, and the Si/Al ratio affected the formation of Bronsted acid sites. The number of the Bronsted acid sites on the catalyst active sites is important in the olefin conversion to liquid hydrocarbons.
文摘Techno-economic potentials of thermal and catalytic pyrolysis plants for the conversion of waste plastics to liquid fuels have been widely studied, but it is not obvious which of the two plants is more profitable, as the existing studies used different assumptions and cost bases in their analyses, thereby making it difficult to compare the economic potentials of the two plants. In this study, industrial-scale thermal and catalytic waste plastics pyrolysis plants were designed and economically analyzed using ASPEN PLUS. Amorphous silica-alumina was considered the optimum catalyst, with 3:1 feed to catalyst ratio. Based on 20,000 tons/year of feed and 20% interest rate, the catalytic plant, having a net present value (NPV) of � million, was found to be economically less attractive than the thermal plant, having the NPV of �.4 million. On the contrary, sensitivity analyses of the two plants at a feed rate of 50,000 tons/year gave rise to a slightly higher NPV for the catalytic plant (� million) than the thermal plant having NPV of � million, thereby making the former more economically attractive for processing large amounts of waste plastics into liquid fuels. Consequently, as the catalytic plant showed a better scale economy and would produce higher quality liquid fuels than the thermal plant, it is recommended for commercialization in Nigeria.
基金supported by the National Key R&D Program of China(2022YFA2105900)the National Natural Science Foundation of China(22178197)。
文摘Highly-efficient oxidation of 5-hydroxymethylfurtural(HMF) to 2,5-furandicarboxylic acid(FDCA) at low temperature with air as the oxidant is still challenging.Herein,inspired by the respirato ry electron transport chain(ETC) of living cells mediated by electron carriers,we constructed artificial ETCs and transformed liquid flow fuel cells(LFFCs) to flexible reactors for efficient oxidation of HMF to produce FDCA under mild conditions.This LFFC reactor employed an electrodeposition modified nickel foam as an anode to promote HMF oxidation and(VO_(2))_(2)SO_(4) as a cathode electron carrier to facilitate the electron transfer to air.The reaction rate could be easily controlled by selecting the anode catalyst,adjusting the external loading and changing the cathodic electron carrier or oxidants.A maximal power density of 44.9 mW cm^(-2) at room temperature was achieved,while for FDCA production,short-circuit condition was preferred to achieve quick transfer of electrons.For a single batch operation with 0.1 M initial HMF,FDCA yield reached 97.1%.By fed-batch operation,FDCA concentration reached 144.5 g L^(-1) with a total yield of 96%.Ni^(2+)/Ni^(3+) redox couple was the active species mediating the electron transfer,while both experimental and DFT calculation results indicated that HMFCA pathway was the preferred reaction mechanism.
文摘This paper presents the experimental and numerical results for a two stagecombustor capable of achieving flameless combustion with liquid fuels for different thermalheat inputs of 20,30,40 and 60 kW and heat release density of 5-15 MW/m^(3).Combustioncharacteristics and pollutant emissions are studied for three different fuels,kerosene,diesel andgasoline.The influence of droplet diameter on pollutant emissions at all conditions is studied.The fuel and oxidizer are supplied at ambient conditions.The concept of high swirl flows hasbeen adopted to achieve high intemal recirculation rates,residence time and increased dilutionof the fresh reactants in the primary combustion zone,resulting in flameless combustion mode.Air is injected through four tangential injection ports located near the bottom of the combustorand liquid fuel is injected through a centrally mounted pressure swirl injector.Computationalanalysis of the flow features shows that decrease in the exit port diameter of the primarychamber increases the recirculation rate of combustion products and helps in achieving theflameless combustion mode.Based on preliminary computational studies,a 30 mm primarychamber exit pont diameter is chosen for experimental studies.Detailed experimentalinvestigations show that flameless combustion mode was achieved with evenly distributedcombustion reaction zone and unifom temperature distribution in the combustor.Pollutant emissions of CO, NO_(x),C_(x)H_(y) are measured and compared for all operating conditions ofdifferent fuels and different thermal inputs. The acoustic emission levels are reduced by6-8 dB as combustion mode shifts from conventional mode to flameless combustion mode.
基金the National Natural Science Foundation of China(31422013)the Research Institute of New Technology,Special Fund for Fundamental Research(CAFYBB2014ZD003)for financial support during this investigation
文摘Increased demand for liquid transportation fuels, environmental concerns and depletion of petroleum resources requires the development of efficient conversion technologies for production of second-generation biofuels from non-food resources. Thermochemical approaches hold great potential for conversion of lignocellulosic biomass into liquid fuels. Direct thermochemical processes convert biomass into liquid fuels in one step using heat and catalysts and have many advantages over indirect and biological processes, such as greater feedstock flexibility, integrated conversion of whole biomass, and lower operation costs. Several direct thermochemical processes are employed in the production of liquid biofuels depending on the nature of the feedstock properties: such as fast pyrolysis/liquefaction of lignocellulosic biomass for bio-oil, including upgrading methods, such as catalytic cracking and hydrogenation. Owing to the substantial amount of liquid fuels consumed by vehicular transport, converting biomass into drop-in liquid fuels may reduce the dependence of the fuel market on petroleumbased fuel products. In this review, we also summarize recent progress in technologies for large-scale equipment for direct thermochemical conversion. We focus on the technical aspects critical to commercialization of the technologies for production of liquid fuels from biomass,including feedstock type, cracking catalysts, catalytic cracking mechanisms, catalytic reactors, and biofuel properties. We also discuss future prospects for direct thermochemical conversion in biorefineries for the production of high grade biofuels.
基金funded by the German Federal Ministry of Education and Research(BMBF)through the research project grant no.01LN1713A.All opinions,results and conclusions in the text are those of the authors and do not necessarily reflect the opinion of the BMBF.
文摘Green hydrogen is anticipated to play a major role in the decarbonization of the mobility sector.Its chemical storage in CO_(2)-neutral synthetic liquid fuels is advantageous in terms of safety and reliability compared to other hydrogen storage developments,and thus represents a complementary building block to developments in electric and hydrogen mobility for the low-carbon transition in the mobility sector.Its development is especially relevant for transport sectors which will have no alternatives to liquid fuels in the foreseeable future.In this paper,three alternative technological routes for the chemical storage of hydrogen in CO_(2)-neutral synthetic liquid fuels are identified and comparatively evaluated in terms of feedstock potential,product potential,demand for renewable electricity and associated costs,efficiency as well as expected market relevance.While all three routes exhibited similar levels of overall efficiencies,electricity-based liquid fuels in Germany are currently limited by the high cost and limited supply of renewable electricity.In contrast,liquid fuels generated from biogenic waste have a constant supply of biogenic feedstock and are largely independent from the supply and cost of renewable electricity.
文摘The dependencies of Fischer-Tropsch synthesis liquid hydrocarbon product distribution on operating pressure and temperature have been studied over three potassium-promoted iron catalysts with increasing potassium molar content. The study followed an experimental planning and the results were analyzed based on surface response methodology. The effects of different operating conditions and potassium contents on the liquid product distribution were compared based on number average carbon number and dispersion. Results showed that high pressures （25 to 30 arm） favored the production of waxes that could be converted into liquid fuels through hydrocracking, while greater direct selectivity towards diesel was favored by low pressure （20 arm） using catalysts with low potassium to iron molar ratios. The liquid product distribution produced using an iron catalyst with high potassium content presented higher number-average number of carbons when compared to the distribution obtained using an iron catalyst with low potassium content.
基金supported by the National Natural Science Foundation of China(21571038,22035004)the Education Department of Guizhou Province(2021312)+2 种基金the Foundation of Guizhou Province(2019-5666)the National Key R&D Program of China(2017YFA0700101)the State Key Laboratory of Physical Chemistry of Solid Surfaces(Xiamen University,202009)。
文摘Surface/interface engineering of a multimetallic nanostructure with diverse electrocatalytic properties for direct liquid fuel cells is desirable yet challenging.Herein,using visible light,a class of quaternary Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)ultrathin nanosheets is fabricated and used as high-performance anode electrocatalysts for formic acid-/alcohol-air fuel cells.The modified electronic structure of Pt,enhanced hydroxyl adsorption,and abundant exterior defects afford Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C high intrinsic anodic electrocatalytic activity to boost the power densities of direct formic acid-/methanol-/ethanol-/ethylene glycol-/glycerol-air fuel cells,and the corresponding peak power density of Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C is respectively 129.7,142.3,105.4,124.3,and 128.0 mW cm^(-2),considerably outperforming Pt/C.Operando in situ Fourier transform infrared reflection spectroscopy reveals that formic acid oxidation on Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)/C occurs via a CO_(2)-free direct pathway.Density functional theory calculations show that the presence of Ag,Bi,and Te in Pt_(1)Ag_(0.1)Bi_(0.16)Te_(0.29)suppresses CO^(*)formation while optimizing dehydrogenation steps and synergistic effect and modified Pt effectively enhance H_(2)O dissociation to improve electrocatalytic performance.This synthesis strategy can be extended to 43 other types of ultrathin multimetallic nanosheets(from ternary to octonary nanosheets),and efficiently capture precious metals(i.e.,Pd,Pt,Rh,Ru,Au,and Ag)from different water sources.
文摘The paper is focused on studying how to convert rice husk and sawdust into liquid fuel. Rice husk, sawdust and their mixture were pyrolyzed at the temperature between 420℃ and 540℃, and the main product of liquid fuel was obtained. The experimental result showed that the yield of liquid fuel heavily depended on the kind of feedstock and pyrolysis temperature. In the experiments, the maximum liquid yields for rice husk, sawdust and their mixture were 56% at 465 ℃, 61% at 490℃ and 60% at 475℃ respectively. Analysis with GC-MS and other apparatus indicated that the liquid fuel is a complicated organic compound with low caloric value and can be directly used as fuel oil without any up-grading. As a crude oil, the liquid fuel can be refined to be vehicle oil.
基金This work was supported by the Scientific Research Projects of the Ministry of Education of China(6141A02033522)the National Natural Science Foundation of China(No.21978200).
文摘The development of advanced air transportation has raised new demands for high-performance liquid hydrocarbon fuels.However,the measurement of fuel properties is time-consuming,cost-intensive,and limited to the operating conditions.The physicochemical properties of aerospace fuels are directly infl uenced by chemical composition.Thus,a thorough investigation should be conducted on the inherent relationship between fuel properties and composition for the design and synthesis of high-grade fuels and the prediction of fuel properties in the future.This work summarized the eff ects of fuel composition and hydrocarbon molecular structure on the fuel physicochemical properties,including density,net heat of combustion(NHOC),low-temperature fl uidity(viscosity and freezing point),fl ash point,and thermal-oxidative stability.Several correlations and predictions of fuel properties from chemical composition were reviewed.Additionally,we correlated the fuel properties with hydrogen/carbon molar ratios(n H/C)and molecular weight(M).The results from the least-square method implicate that the coupling of H/C molar ratio and M is suitable for the estimation of density,NHOC,viscosity and eff ectiveness for the design,manufacture,and evaluation of aviation hydrocarbon fuels.
基金the Chinese Academy of Sciences TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000).
文摘A liquid fueled thorium molten salt reactor(TMSR-LF),one of the Generation IV reactors,was designed by the Shanghai Institute of Applied Physics,Chinese Academy of Sciences.This study uses the‘rt code to calculate the neutron and gamma dose rate distributions around the reactor.Multiple types of tallies and variance reduction techniques were employed to reduce calculation time and obtain convergent calculation results.Based on the calculation and analysis results,the TMSR-LF1 radiation shield with a 60-cm serpentine concrete layer and a 120-cm ordinary concrete layer is able to meet radiation requirements.The gamma dose rate outside the reactor biological shield was 16.1 mSv h-1;this is higher than the neutron dose rate of 3.71×10^(–2)mSv h^(-1).The maximum thermal neutron flux density outside the reactor biological shield was 1.899103 cm^(-2)s^(-1),which was below the 19105 cm^(-2)s^(-1)limit.
基金financially supported by the National Natural Science Foundation of China(No.21978200)Scientific Research Projects of the Ministry of Education of China(No.6141A02033522)。
文摘Aerospace aircraft has significantly improved the life quality of human beings and extended the capability of space explosion since its appearance in 1903,in which liquid propellants or fuels provide the key power source.For jet fuels,its property of energy density plays an important role in determining the flight range,load,and performance of the aircraft.Therefore,the design and fabrication of high-energy-density(HED)fuels attract more and more attention from researchers all over the world.Herein,we briefly introduce the development of liquid jet fuels and HED fuels and demonstrate the future development of HED fuels.To further improve the energy density of fuel,the approaches of design and construction of multi-cyclic and stained molecule structures are proposed.To break through the density limit of hydrocarbon fuels,the addition of energetic nanoparticles in HED fuels to produce nanofluid or gelled fuels may provide a facile and effective method to significantly increase the energy density.This work provides the perspective for the development of HED fuels for advanced aircrafts.
基金financial supports from the National Science Foundation under Grant Nos. CBET-1949840 and CMMI-1851674financial support from the Preeminent Postdoctoral Program (P3) of the University of Central Florida。
文摘Direct liquid fuel cells(DLFCs) have received increasing attention because of their high energy densities,instant recharging abilities, simple cell structure, and facile storage and transport. The main challenge for the commercialization of DLFCs is the high loading requirement of platinum group metals(PGMs) as catalysts. Atomically dispersed catalysts(ADCs) have been brought into recent focus for DLFCs due to their well-defined active sites, high selectivity, maximal atom-utilization, and anti-poisoning property. In this review, we summarized the structure–property relationship for unveiling the underlying mechanisms of ADCs for DLFCs. More specifically, different types of fuels used in DLFCs such as methanol, formic acid,and ethanol were discussed. At last, we highlighted current challenges, research directions, and future outlooks towards the practical application of DLFCs.
基金supported by the funding of the German Research Council (DFG), which, within the framework of its Excellence Initiative, supports the Cluster of Excellence “Engineering of Advanced Materials” (www.eam.uni-erlangen.de) at the University of Erlangen-Nürnberg
文摘The performance of an electrocatalyst, which is needed e.g. for key energy conversion reactions such as hydrogen evolution, oxygen reduction or CO2 reduction, is determined not only by the inherent structure of active sites but also by the properties of the interfacial structures at catalytic surfaces. Ionic liquids（ILs）, as a unique class of metal salts with melting point below 100 ℃, present themselves as ideal modulators for manipulations of the interfacial structures. Due to their excellent properties such as good chemical stability, high ionic conductivity, wide electrochemical windows and tunable solvent properties the performance of electrocatalysts can be substantially improved through ILs. In the current minireview, we highlight the critical role of the IL phase at the microenvironments created by the IL, the liquid electrolyte, catalytic nanoparticles and/or support materials, by detailing the promotional effect of IL in electrocatalysis as reaction media, binders, and surface modifiers. Updated exemplary applications of IL in electrocatalysis are given and moreover, the latest developments of IL modified electrocatalysts following the ＂Solid Catalyst with Ionic Liquid Layer（SCILL）＂ concept are presented.
基金financialy supported by the National Key R&D Program of China(No.2018YFB1502303)the National Natural Science Foundation of China(No.21722601,U19A2017)China Postdoctoral Science Foundation(No.2019M660389)。
文摘Direct liquid fuel cells(DLFCs)are proposed to address the problems of high cost and complex storage and transportation of hydrogen in traditional hydrogen-oxygen proton exchange membrane fuel cells.However,present fuels of organic small molecules used in DLFCs are restricted to problems of sluggish electrochemical kinetics and easily poisoning of precious metal catalysts.Herein,we demonstrate reduced phosphotungstic acid as a liquid fuel for DLFCs based on its advantages of high chemical and electrochemical stability,high electrochemical activity on common carbon material electrodes,and low permeability through proton exchange membranes.The application of phosphotungstic acid fuel effectively solves the problems of high cost of anode catalysts and serious fuel permeation loss in traditional DLFCs.A phosphotungstic acid fuel cell achieves a peak power density of466 mW cm^(-2)at a cell voltage of 0.42 V and good stability at current densities in the range from 20 to 200 mA cm^(-2).
文摘Pyrolysis is one of the thermal cracking methods to convert hydrocarbon to liquid fuel.The quantity and quality of the process are dependent on several condition including temperature,reaction time,catalyst,and the type of reactor.Meanwhile,a gasoline fraction was maximum product to be considered in the pyrolisis process.Therefore,this study aims to increase the gasoline fraction in liquid fuel using stepwise pyrolysis with a long bed catalytic reactor downstream(LBCR).The LBCR downstream was equipped with the top and bottom outlet and the fed source was mixed municipal solid waste(MMSW).The activated natural dolomite at 500℃ was used to allow the repetition of the secondary cracking.Also,the reactor temperature was setup at around 200℃-300℃ and the pyrolizer was 400℃.To analyze the gasoline fraction and physical properties of liquid fuel,Gas Chromatography-Mass Spectroscopy(GC-MS)and ASTM standard were employed.The experimental results showed there was a significant increase in the gasoline fraction of liquid fuels compared to using direct catalytic cracking and absence of catalysts.By using a LBCR at 250℃,the liquid fuel obtained at top outlet(TO)and bottom outlet(BO)have 84.08 and 56.94 percent peak area of gasoline fraction(C5-C12),respectively.The average value(TO and BO)of the fraction at 250℃ by LBCR was 70.51 percent peak area and it was increased by about 93.6%and 51.14%compared to without catalyst and direct catalytic,respectively.Furthermore,pyrolytic liquid oils were found to have kinematic viscosity of 2.979 and 0.789 cSt,density of 0.781 and 0.782 g/cm^(3),and flash point<−5℃ for BO-250 and TO-250 liquid fuel,respectively.These results showed BO liquid fuel was comparable to diesel conventional fuel while TO liquid fuel was comparable to gasoline.Evidently,the presence of LBCR made a major contribution to generate multi secondary cracking and to produce more gasoline fraction from mixed MMSW feedstock,as well as to increase the physical properties of liquid fuel.
文摘The quantities of gas released into the environment during the extraction and processing of crude oil,by flaring,constitute a vast source of mineral wealth which can be used to produce other useful products.The processes studied in this paper,as alternatives to the above problem,are the ones used in Shell Pearl Qatar project and Oryx GTL project.Both projects produce liquid fuels,mainly naphtha and diesel,in addition to more special fuel such as kerosene.This paper is a feasibility study of a project that makes use of the flare gas from the State of Texas,U.S.A.,as a feedstock to a process similar to either Shell Pearl Qatar project,or Oryx GTL project.The objective of this study is to determine the price range for crude oil over which an investment to similar projects can be profitable.An MS Excel Model was developed in order to perform calculations having as a variable the crude oil price and taking into account all the process and project’s financial data.The results of this model showed that a project similar to Shell Pearl Qatar remains profitable in crude oil price above$57.76/barrel,while a project similar to Oryx GTL remains viable for crude oil price over$31.4/bbl.In the price range$55-$60/barrel,the payout of the corresponding to Shell Pearl Qatar project will be in about 15.2 years and 3.3 years for a project similar to Oryx GTL.Finally,using the financial principles of this study we can apply them to any process in order to determine under what conditions will remain viable.
基金supported by the National Natural Science Foundation of China(No.2187817622178197)。
文摘Conventional chemical oxidation of aldehydes such as furfural to corresponding acids by molecular oxygen usually needs high pressure to increase the solubility of oxygen in aqueous phase,while electrochemical oxidation needs input of external electric energy.Herein,we developed a liquid flow fuel cell(LFFC)system to achieve oxidation of furfural in anode for furoic acid production with co-production of hydrogen gas.By controlling the electron transfer in cathode for reduction of oxygen,efficient generation of electricity or production of H_(2)O_(2)were achieved.Metal oxides especially Ag_(2)O have been screened as the efficient catalyst to promote the oxidation of aldehydes,while liquid redox couples were used for promoting the kinetics of oxygen reduction.A novel alkaline-acidic asymmetric design was also used for anolyte and catholyte,respectively,to promote the efficiency of electron transfer.Such an LFFC system achieves efficient conversion of chemical energy of aldehyde oxidation to electric energy and makes full use the transferred electrons for high-value added products without input of external energy.With(VO_(2))_(2)SO_(4)as the electron carrier in catholyte for four-electron reduction of oxygen,the peak output power density(Pmax)at room temperature reached 261 mW/cm^(2)with furoic acid and H_(2)yields of 90%and 0.10 mol/mol furfural,respectively.With anthraquinone-2-sulfonate(AQS)as the cathodic electron carrier,Pmaxof 60 mW/cm^(2)and furoic acid,H_(2)and H_(2)O_(2)yields of 0.88,0.15 and 0.41 mol/mol furfural were achieved,respectively.A new reaction mechanism on furfural oxidation on Ag_(2)O anode was proposed,referring to one-electron and two-electron reaction pathways depending on the fate of adsorbed hydrogen atom transferred from furfural aldehyde group.
基金the financial support provided by the National Natural Science Foundation of China(No.52161145403)the Iran National Science Foundation(No.4001399)the Research Fund of Shenyang National Laboratory for Materials Science.
文摘Hydrocracking catalysis is a controllable route to plastic waste upgrading. However, the mismatched acid site-driven C-C cleavage and C=C hydrogenation process on metal restrict the efficiency and selectivity in conventional metal/acid bi-functional catalyst. Herein, we introduce Al deficiency in Si-O(H)-Al structural units of Pt/zeolite socony mobil-5 (Pt/ZSM-5) through discharge driven reduction (DR) process to precisely control the ratio of metal to acid, achieving hydrocracking of low-density polyethylene (LDPE) waste at 270 °C with 87.7% conversion and liquid fuel (C5-C21) selectivity of 77.8%. Pair distribution function (PDF) and nuclear magnetic resonance (NMR) spectroscopy demonstrate the partial absent Al sites further resulting short-range local disorder Si-O(H)-Al. Upon pyridine infrared spectroscopy (Py-IR) and CO diffuse reflectance Fourier-transform infrared (CO DRIFT) analysis, the extraction of Al modulates Brønsted acid density of Pt/ZSM-5 with DR process (Pt/Z5DR), improves the interaction between Pt and ZSM-5 support, enhances the cationic of Pt. The metal-acid balance and electron-deficient Pt favor the matching speed of light olefins hydrogenation and the cracking of macromolecule intermediates. Moreover, density functional theory (DFT) calculations identify the thermodynamic stability of Pt/Z5DR and moderate adsorption capability towards light olefins. This work confirms the great potential of precisely controlled molar of metal to acid in metal/zeolite catalysts for LDPE upcycling, providing a viable path for dealing with PE plastic wastes.
