We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law ...We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law model.Unlike most studies on this topic,we consider both the bending deformation of the beams and the hygro-thermal load as size-dependent,simultaneously,by adopting the equivalent differential forms of the well-posed nonlocal strain gradient integral theory(NSGIT)which are strictly equipped with a set of constitutive boundary conditions(CBCs),and through which both the stiffness-hardening and stiffness-softening effects of the structures can be observed with the length-scale parameters changed.All the variables presented in the differential problem formulation are discretized.The numerical solution of the dynamic instability region(DIR)of various bounded beams is then developed via the generalized differential quadrature method(GDQM).After verifying the present formulation and results,we examine the effects of different parameters such as the nonlocal/gradient length-scale parameters,the static force factor,the functionally graded(FG)parameter,and the porosity parameter on the DIR.Furthermore,the influence of considering the size-dependent hygro-thermal load is also presented.展开更多
Face stability is an essential issue in tunnel design and construction.Layered rock masses are typical and ubiquitous;uncertainties in rock properties always exist.In view of this,a comprehensive method,which combines...Face stability is an essential issue in tunnel design and construction.Layered rock masses are typical and ubiquitous;uncertainties in rock properties always exist.In view of this,a comprehensive method,which combines the Upper bound Limit analysis of Tunnel face stability,the Polynomial Chaos Kriging,the Monte-Carlo Simulation and Analysis of Covariance method(ULT-PCK-MA),is proposed to investigate the seismic stability of tunnel faces.A two-dimensional analytical model of ULT is developed to evaluate the virtual support force based on the upper bound limit analysis.An efficient probabilistic analysis method PCK-MA based on the adaptive Polynomial Chaos Kriging metamodel is then implemented to investigate the parameter uncertainty effects.Ten input parameters,including geological strength indices,uniaxial compressive strengths and constants for three rock formations,and the horizontal seismic coefficients,are treated as random variables.The effects of these parameter uncertainties on the failure probability and sensitivity indices are discussed.In addition,the effects of weak layer position,the middle layer thickness and quality,the tunnel diameter,the parameters correlation,and the seismic loadings are investigated,respectively.The results show that the layer distributions significantly influence the tunnel face probabilistic stability,particularly when the weak rock is present in the bottom layer.The efficiency of the proposed ULT-PCK-MA is validated,which is expected to facilitate the engineering design and construction.展开更多
In recent years,regional floods and typhoons have occurred in the Yangtze Estuary.Changing dynamic conditions and dramatic reduction of sediment discharge in the basin are affecting the dynamic equilibrium pattern of ...In recent years,regional floods and typhoons have occurred in the Yangtze Estuary.Changing dynamic conditions and dramatic reduction of sediment discharge in the basin are affecting the dynamic equilibrium pattern of the Yangtze Estuary.Based on the field measurement data and theoretical derivation,this paper analyzed the changing process of runoff-sediment discharge into the sea after the operation of the Three Gorges Project(TGP),and the tidal dynamics and sediment variation characteristics of the Yangtze Estuary.The erosion of South Branch mainly occurs in the channel below-10 m contour,and the riverbed volume below contours 0 m and-10 m has a good correlation with the sediment discharge of Datong Station in the previous year.On this basis,the ratio of the horizontal distance from the starting point to the section centroid below the average water level(B_c)and the water depth at the section centroid(H_c)was proposed to describe the change of the section shape.The relationships between the water-diverting ratio,the sediment-diverting ratio and the water-diverting angle,the conditions of runoff and sediment discharge from the upper reach and the characteristics of the riverway section were established,and the theoretical calculation equations of the water-diverting ratio,the sediment-diverting ratio and the diverting angle of each bifurcation were also established.展开更多
This paper proposes a theoretical method that can be used in calculating the stability of coral reefs or artificial islands.In this work,we employ the variational limiting equilibrium procedure to theoretically determ...This paper proposes a theoretical method that can be used in calculating the stability of coral reefs or artificial islands.In this work,we employ the variational limiting equilibrium procedure to theoretically determine the slope stability of coral reefs covered with hard reef shells as a result of horizontal wave loads.A reasonable functional is proposed and its extremum is calculated based on the conservation of energy.Then,we deduce the stability factor Ns of coral reefs under combined vertical self-gravity and horizontal wave loads,which is consistent with the published results.We compare some classic examples of homogeneous slopes without hard shells in order to analyze the accuracy of results generated by this variational procedure.The variational results are accurate and reliable according to the results of a series of detailed calculations and comparisons.Simultaneously,some other influence parameters on the reef stability,including the top-layer tensile strength of coral reef,the amplitude of wave loading,and the tensile crack,are calculated and discussed in detail.The analysis results reveal that the existence of a hard reef shell could enhance the stability of reef slope and that there is a nonlinear relationship between the stability factor Ns,the shear strength,and the thickness Ds of the covered coral reef shell.Furthermore,the emergence of top-layer tensile cracks on the coral reefs reduces their stability,and the action of horizontal wave loads greatly decreases the stability of coral reefs.Thus,the hard shell strength and its thickness Ds,surface tensile crack,and wave loading require more careful attention in the field of practical engineering.展开更多
In the conventional technique,in the evaluation of the severity index,clustering and loading suffer from more iteration leading to more com-putational delay.Hence this research article identifies,a novel progression f...In the conventional technique,in the evaluation of the severity index,clustering and loading suffer from more iteration leading to more com-putational delay.Hence this research article identifies,a novel progression for fast predicting the severity of the line and clustering by incorporating machine learning aspects.The polynomial load modelling or ZIP(constant impedances(Z),Constant Current(I)and Constant active power(P))is developed in the IEEE-14 and Indian 118 bus systems considered for analysis of power system security.The process of finding the severity of the line using a Hybrid Line Stability Ranking Index(HLSRI)is used for assisting the concepts of machine learning with J48 algorithm,infers the superior affected lines by adopting the IEEE standards in concern to be compensated in maintaining the power system stability.The simulation is performed in the WEKA environment and deals with the supervisor learning in order based on severity to ensure the safety of power system.The Unified Power Flow Controller(UPFC),facts devices for the purpose of compensating the losses by maintaining the voltage characteristics.The finite element analysis findings are compared with the existing procedures and numerical equations for authentications.展开更多
In this paper, a set of variational formulas of solving nonlinear instability critical loads are established from the viewpoint of variational principle. The paper shows that it is very convenient to solve nonlinear i...In this paper, a set of variational formulas of solving nonlinear instability critical loads are established from the viewpoint of variational principle. The paper shows that it is very convenient to solve nonlinear instability critical load by using the variational formulas suggested in this paper.展开更多
The influences of steady aerodynamic loads on hunting stability of high-speed railway vehicles were investigated in this study.A mechanism is suggested to explain the change of hunting behavior due to actions of aerod...The influences of steady aerodynamic loads on hunting stability of high-speed railway vehicles were investigated in this study.A mechanism is suggested to explain the change of hunting behavior due to actions of aerodynamic loads：the aerodynamic loads can change the position of vehicle system（consequently the contact relations）,the wheel/rail normal contact forces,the gravitational restoring forces/moments and the creep forces/moments.A mathematical model for hunting stability incorporating such influences was developed.A computer program capable of incorporating the effects of aerodynamic loads based on the model was written,and the critical speeds were calculated using this program.The dependences of linear and nonlinear critical speeds on suspension parameters considering aerodynamic loads were analyzed by using the orthogonal test method,the results were also compared with the situations without aerodynamic loads.It is shown that the most dominant factors a ff ecting linear and nonlinear critical speeds are different whether the aerodynamic loads considered or not.The damping of yaw damper is the most dominant influencing factor for linear critical speeds,while the damping of lateral damper is most dominant for nonlinear ones.When the influences of aerodynamic loads are considered,the linear critical speeds decrease with the rise of cross wind velocity,whereas it is not the case for the nonlinear critical speeds.The variation trends of critical speeds with suspension parameters can be significantly changed by aerodynamic loads.Combined actions of aerodynamic loads and suspension parameters also a ff ect the critical speeds.The effects of such joint action are more obvious for nonlinear critical speeds.展开更多
The vibration characteristics and dynamic responses of rock and soil under seismic load can be estimated with dynamic finite element method （DFEM）. Combining with the DFEM, the vector sum analysis method （VSAM） is...The vibration characteristics and dynamic responses of rock and soil under seismic load can be estimated with dynamic finite element method （DFEM）. Combining with the DFEM, the vector sum analysis method （VSAM） is employed in seismic stability analysis of a slope in this paper. Different from other conventional methods, the VSAM is proposed based on the vector characteristic of force and current stress state of the slope. The dynamic stress state of the slope at any moment under seismic load can he obtained by the DFEM, thus the factor of safety of the slope at any moment during earthquake can be easily obtained with the VSAM in consideration of the DFEM. Then, the global stability of the slope can be estimated on the basis of time-history curve of factor of safety and reliability theory. The VSAM is applied to a homogeneous slope under seismic load. The factor of safety of the slope is 1.30 under gravity only and the dynamic factor of safety under seismic load is 1.21. The calculating results show that the dynamic characteristics and stability state of the slope with input ground motion can be actually analyzed. It is believed that the VSAM is a feasible and practical approach to estimate the dynamic stability of slopes under seismic load.展开更多
The limit equilibrium method （LEM） is widely used for sliding stability evaluation of concrete gravitydams. Failure is then commonly assumed to occur along the entire sliding surface simultaneously.However, the brit...The limit equilibrium method （LEM） is widely used for sliding stability evaluation of concrete gravitydams. Failure is then commonly assumed to occur along the entire sliding surface simultaneously.However, the brittle behaviour of bonded concrete-rock contacts, in combination with the varying stressover the interface, implies that the failure of bonded dam-foundation interfaces occurs progressively. Inaddition, the spatial variation in cohesion may introduce weak spots where failure can be initiated.Nonetheless, the combined effect of brittle failure and spatial variation in cohesion on the overall shearstrength of the interface has not been studied previously. In this paper, numerical analyses are used toinvestigate the effect of brittle failure in combination with spatial variation in cohesion that is taken intoaccount by random fields with different correlation lengths. The study concludes that a possible existenceof weak spots along the interface has to be considered since it significantly reduces the overallshear strength of the interface, and implications for doing so are discussed.展开更多
Two calculation modes for the effect of external load on slope stability, i.e., mode I in which the external load is thought to act on slope surface, and mode II in which the external load is thought to act on slip su...Two calculation modes for the effect of external load on slope stability, i.e., mode I in which the external load is thought to act on slope surface, and mode II in which the external load is thought to act on slip surface along the force action line, were considered. Meanwhile, four basic distribution patterns of external load were used, of which complex external loads could be composed. In analysis process, several limit equilibrium methods, such as Swedish method, simplified Bishop method, simplified Janbu method, Spencer method, Morgenstern-Price(M-P) method, Sarma method, and unbalanced thrust method, were also adopted to contrast their differences in slope stability under the external load. According to parametric analysis, some conclusions can be obtained as follows:(1) The external load, with the large magnitude, small inclination angle, and acting position close to the slope toe,has more positive effect on slope stability;(2) The results calculated using modes I and II of external load are similar, indicating that the calculation mode of external load has little influence on slope stability;(3) If different patterns of external loads are equivalent to each other, their slope stability under these external loads are the same, and if not, the external load leads to the better slope stability,as action position of the resultant force for external load is closer to the lower sliding point of slip surface.展开更多
Temporal variation of rock mass properties,especially the strength degradation due to drying-wetting cycles as well as the acidic wetting fluid(rainfall or reservoir water)is crucial to stability of reservoir rock slo...Temporal variation of rock mass properties,especially the strength degradation due to drying-wetting cycles as well as the acidic wetting fluid(rainfall or reservoir water)is crucial to stability of reservoir rock slopes.Based on a series of drying-wetting cycling and experiments considering the influences of pH values,the degradation degree models of the reduced cohesion𝑐𝑐′,friction angle𝜑𝜑′are developed.2D stability analysis of the slope is subsequently carried out to calculate the factor of safety(Fs)via limit equilibrium method(LEM)and a predictive model of Fs is built using multivariate adaptive regression splines(MARS),revealing the effect of the drying-wetting cycles and pH value.The reliability analysis by Monte Carlo simulation is performed to rationally consider the uncertainty and the temporal variation of the shear strength parameters of rock mass.Results indicate that the MARS-based model can estimate the Fs accurately.The Fs and the reliability indexβdecrease with increase of drying-wetting cycles,and the temporal variation of rock mass properties has significant influence on the slope reliability.Overlooking the temporal variation of rock properties may overestimate the Fs and reliability indexβin the longer term.展开更多
Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77...Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77 field cases,5 quantitative indicators are selected to improve the accuracy of prediction models for slope stability.These indicators include slope angle,slope height,internal friction angle,cohesion and unit weight of rock and soil.Potential data aggregation in the prediction of slope stability is analyzed and visualized based on Six-dimension reduction methods,namely principal components analysis(PCA),Kernel PCA,factor analysis(FA),independent component analysis(ICA),non-negative matrix factorization(NMF)and t-SNE(stochastic neighbor embedding).Combined with classic machine learning methods,7 prediction models for slope stability are established and their reliabilities are examined by random cross validation.Besides,the significance of each indicator in the prediction of slope stability is discussed using the coefficient of variation method.The research results show that dimension reduction is unnecessary for the data processing of prediction models established in this paper of slope stability.Random forest(RF),support vector machine(SVM)and k-nearest neighbour(KNN)achieve the best prediction accuracy,which is higher than 90%.The decision tree(DT)has better accuracy which is 86%.The most important factor influencing slope stability is slope height,while unit weight of rock and soil is the least significant.RF and SVM models have the best accuracy and superiority in slope stability prediction.The results provide a new approach toward slope stability prediction in geotechnical engineering.展开更多
The genetic stability of variations of main agronomic characteristics in progenies from the regenerated plants of immature embryo culture in vitro was studied. The results showed that the variations of earliness in ma...The genetic stability of variations of main agronomic characteristics in progenies from the regenerated plants of immature embryo culture in vitro was studied. The results showed that the variations of earliness in maturity, high 1000-grain weight, plant height and grain weight per spike were heritable and tended to be stable in IE3 and completely stable in IE4 The wide variation of main agronomic characteristics induced by embryo culture in vitro provided the probability of selection in wheat improvement. Some somaclonal lines with useful variations could be used directly in wheat production.展开更多
To analyze the physical structure of assembly process and assure product quality, the quality stability of multi-station assembly process was investigated. First, the assembly process was modeled as a one-dimensional ...To analyze the physical structure of assembly process and assure product quality, the quality stability of multi-station assembly process was investigated. First, the assembly process was modeled as a one-dimensional discrete variant system by state space equation based on variation stream. Then, the criterion to judge whether the process is stable or not and the index, stability degree, to show the level of stability were proposed by analyzing the bounded-input bounded-output (BIBO) stability of system. Finally, a simulated example of a sheet metal assembly process with three stations, was provided to verify the effectiveness of the proposed method.展开更多
In this paper, to begin with. the nonlinear differential equations of a truncaled shallow spherical shell with variable thickness under uniformal distributed load are linearized by step-by-step loading method. The lin...In this paper, to begin with. the nonlinear differential equations of a truncaled shallow spherical shell with variable thickness under uniformal distributed load are linearized by step-by-step loading method. The linear differential equations can be solved by spline collocanon method. Critical loads have been obtained accordingly.展开更多
This paper presents a newly developed proximity indicator for voltage stability assessment which can be used to predict critical real system load and voltages at various load buses at critical loading point.The proxim...This paper presents a newly developed proximity indicator for voltage stability assessment which can be used to predict critical real system load and voltages at various load buses at critical loading point.The proximity indicator varies almost parabolic with total real load demand and reaches orthogonally to real load axis.This relation has been utilized to predict critical loading point.It has been shown that two operating points are needed for estimating critical point and proper selection of operating points and variation of proximity indicator near collapse point highly affect the accuracy of estimation.Simulation is based on load flow equations and system real and reactive loadings have been increased in proportion with base case scenario for IEEE 14 and IEEE 25 bus test systems to demonstrate the behaviour of proposed proximity indicator.CPF has been used as benchmark to check the accuracy of estimation.展开更多
this paper gives the resultant forces and moments strain energy and work of external forces on the basis of the deformation theory of flexible body therefore in aqcfordance with the principle of virtual displacement t...this paper gives the resultant forces and moments strain energy and work of external forces on the basis of the deformation theory of flexible body therefore in aqcfordance with the principle of virtual displacement the energy criterion of critical lad is obtained and the equilibrium equation and boundary conditions of stability problem are derived展开更多
Slope stability is one of the most important subjects of geotechnics. The slope top-loading plays a key role in the stability of slopes in hill slope areas. When the building load is too large or the point of action f...Slope stability is one of the most important subjects of geotechnics. The slope top-loading plays a key role in the stability of slopes in hill slope areas. When the building load is too large or the point of action from the shoulder is too close, the shear stress of the slope will be significantly greater than its shear strength, resulting in reduced slope stability. Therefore, it is of great importance to study the relationship between the building load and the stability of the slope. This study aims to analyze the influence of different building loads applied at different distances on the top of the slope and deduces their effects on the slope stability. For this purpose, a three-dimensional slope model under different building loads with different distances to the slope shoulder was established using the finite-difference analysis software Flac3D. The results show that the loads applied at different distances on the top of the slope have different effects on the slope stability. The slope factor of safety (FOS) increases with the increase of the distance between the top-loading and the slope shoulder;it varies from 1.37 to 1.53 for the load P = 120 KPa, 1.27 to 1.53 for the load P = 200 KPa, and from 1.18 to 1.44 for P = 300 KPa, resulting in the decrease of the coincidence area between the load-deformation and the potential sliding surface. The slope is no longer affected by the potential risk of sliding at approximately 20 m away from the slope shoulder.展开更多
This paper describes scientific research conducted to highlight the potential of an integrated GPR-UAV system in engineering-geological applications.The analysis focused on the stability of a natural scree slope in th...This paper describes scientific research conducted to highlight the potential of an integrated GPR-UAV system in engineering-geological applications.The analysis focused on the stability of a natural scree slope in the Germanasca Valley,in the western Italian Alps.As a consequence of its steep shape and the related geological hazard,the study used different remote sensed methodologies such as UAV photogrammetry and geophysics survey by a GPR-drone integrated system.Furthermore,conventional in-situ surveys led to the collection of geological and geomorphological data.The use of the UAV-mounted GPR allowed us to investigate the bedrock depth under the detrital slope deposit,using a non-invasive technique able to conduct surveys on inaccessible areas prone to hazardous conditions for operators.The collected evidence and the results of the analysis highlighted the stability of the slope with Factors of Safety,verified in static conditions(i.e.,natural static condition and static condition with snow cover),slightly above the stability limit value of 1.On the contrary,the dynamic loading conditions(i.e.,seismic action applied)showed a Factor of Safety below the stability limit value.The UAV-mounted GPR represented an essential contribution to the surveys allowing the definition of the interface debris deposit-bedrock,which are useful to design the slope model and to evaluate the scree slope stability in different conditions.展开更多
The purpose of this work was to explore the influence law of vibration load on rock mass structure and slope stability.Based on the type and transmission way of vibration stress wave,the main stress in the horizontal ...The purpose of this work was to explore the influence law of vibration load on rock mass structure and slope stability.Based on the type and transmission way of vibration stress wave,the main stress in the horizontal and vertical directions was analyzed and the superposition effect of the stress wave was revealed.After the mechanical analysis of the sliding mass,the calculation formulas of the anti-sliding force and the sliding force were derived and the damage mechanism of blasting vibration to the structural plane was defined.In addition,according to the structure and lithologic parameter of the slope as well as the vibration monitoring data,the west slope stability of Xiaolongtan open pit mine was analyzed.The results show that the time-dependent stability factor is proportional to the vibration speed and the peak values appear at the same time.Vibration load promotes the breakage of the structural plane leading to the drop of the west slope stability factor by 0.23%.Under the multipoint simultaneous blasting,the fluctuating laws of the stability factors are consistent.The more the start-up points are,the higher the weakening degree to the slope stability is.Under the multipoint allochronic blasting,the stability factor depends on the synthetic waveform structure of all vibration waves.The greater the blasting time difference is,the lower the weakening degree to the slope stability is.Selecting the reasonable quantity of start-up points and time difference could fully reduce the adverse influence of vibration load to slope stability.展开更多
基金Project supported by the National Natural Science Foundation of China(No.12172169)the Natural Sciences and Engineering Research Council of Canada(No.NSERC RGPIN-2023-03227)。
文摘We present a study on the dynamic stability of porous functionally graded(PFG)beams under hygro-thermal loading.The variations of the properties of the beams across the beam thicknesses are described by the power-law model.Unlike most studies on this topic,we consider both the bending deformation of the beams and the hygro-thermal load as size-dependent,simultaneously,by adopting the equivalent differential forms of the well-posed nonlocal strain gradient integral theory(NSGIT)which are strictly equipped with a set of constitutive boundary conditions(CBCs),and through which both the stiffness-hardening and stiffness-softening effects of the structures can be observed with the length-scale parameters changed.All the variables presented in the differential problem formulation are discretized.The numerical solution of the dynamic instability region(DIR)of various bounded beams is then developed via the generalized differential quadrature method(GDQM).After verifying the present formulation and results,we examine the effects of different parameters such as the nonlocal/gradient length-scale parameters,the static force factor,the functionally graded(FG)parameter,and the porosity parameter on the DIR.Furthermore,the influence of considering the size-dependent hygro-thermal load is also presented.
基金supported by Science and Technology Project of Yunnan Provincial Transportation Department(Grant No.25 of 2018)the National Natural Science Foundation of China(Grant No.52279107)The authors are grateful for the support by the China Scholarship Council(CSC No.202206260203 and No.201906690049).
文摘Face stability is an essential issue in tunnel design and construction.Layered rock masses are typical and ubiquitous;uncertainties in rock properties always exist.In view of this,a comprehensive method,which combines the Upper bound Limit analysis of Tunnel face stability,the Polynomial Chaos Kriging,the Monte-Carlo Simulation and Analysis of Covariance method(ULT-PCK-MA),is proposed to investigate the seismic stability of tunnel faces.A two-dimensional analytical model of ULT is developed to evaluate the virtual support force based on the upper bound limit analysis.An efficient probabilistic analysis method PCK-MA based on the adaptive Polynomial Chaos Kriging metamodel is then implemented to investigate the parameter uncertainty effects.Ten input parameters,including geological strength indices,uniaxial compressive strengths and constants for three rock formations,and the horizontal seismic coefficients,are treated as random variables.The effects of these parameter uncertainties on the failure probability and sensitivity indices are discussed.In addition,the effects of weak layer position,the middle layer thickness and quality,the tunnel diameter,the parameters correlation,and the seismic loadings are investigated,respectively.The results show that the layer distributions significantly influence the tunnel face probabilistic stability,particularly when the weak rock is present in the bottom layer.The efficiency of the proposed ULT-PCK-MA is validated,which is expected to facilitate the engineering design and construction.
基金financially supported by the Key Laboratory of Estuarine&Coastal Engineering,Ministry of Transport Open Research Program (Grant No.KLECE202001)CRSRI Open Research Program (Grant No.CKWV20221007/KY)+4 种基金the National Natural Science Foundation of China (Grant No.51979172)Jiangsu Provincial Water Conservancy Technology Project (Grant Nos.2020002,2021025,and 2021029)Fundamental Research Funds for Central Public Welfare Research Institutes (Y223002)Innovation Team Project of Estuarine and Coastal Protection and Management (Grant No.Y220013)the Major Scientific Projects of the Ministry of Water Resources (Grant No.SKS-2022087)。
文摘In recent years,regional floods and typhoons have occurred in the Yangtze Estuary.Changing dynamic conditions and dramatic reduction of sediment discharge in the basin are affecting the dynamic equilibrium pattern of the Yangtze Estuary.Based on the field measurement data and theoretical derivation,this paper analyzed the changing process of runoff-sediment discharge into the sea after the operation of the Three Gorges Project(TGP),and the tidal dynamics and sediment variation characteristics of the Yangtze Estuary.The erosion of South Branch mainly occurs in the channel below-10 m contour,and the riverbed volume below contours 0 m and-10 m has a good correlation with the sediment discharge of Datong Station in the previous year.On this basis,the ratio of the horizontal distance from the starting point to the section centroid below the average water level(B_c)and the water depth at the section centroid(H_c)was proposed to describe the change of the section shape.The relationships between the water-diverting ratio,the sediment-diverting ratio and the water-diverting angle,the conditions of runoff and sediment discharge from the upper reach and the characteristics of the riverway section were established,and the theoretical calculation equations of the water-diverting ratio,the sediment-diverting ratio and the diverting angle of each bifurcation were also established.
基金the Project of National Science and Technology Ministry(No.2014BAB16B03)the National Natural Science Foundation of China(No.51679224)。
文摘This paper proposes a theoretical method that can be used in calculating the stability of coral reefs or artificial islands.In this work,we employ the variational limiting equilibrium procedure to theoretically determine the slope stability of coral reefs covered with hard reef shells as a result of horizontal wave loads.A reasonable functional is proposed and its extremum is calculated based on the conservation of energy.Then,we deduce the stability factor Ns of coral reefs under combined vertical self-gravity and horizontal wave loads,which is consistent with the published results.We compare some classic examples of homogeneous slopes without hard shells in order to analyze the accuracy of results generated by this variational procedure.The variational results are accurate and reliable according to the results of a series of detailed calculations and comparisons.Simultaneously,some other influence parameters on the reef stability,including the top-layer tensile strength of coral reef,the amplitude of wave loading,and the tensile crack,are calculated and discussed in detail.The analysis results reveal that the existence of a hard reef shell could enhance the stability of reef slope and that there is a nonlinear relationship between the stability factor Ns,the shear strength,and the thickness Ds of the covered coral reef shell.Furthermore,the emergence of top-layer tensile cracks on the coral reefs reduces their stability,and the action of horizontal wave loads greatly decreases the stability of coral reefs.Thus,the hard shell strength and its thickness Ds,surface tensile crack,and wave loading require more careful attention in the field of practical engineering.
文摘In the conventional technique,in the evaluation of the severity index,clustering and loading suffer from more iteration leading to more com-putational delay.Hence this research article identifies,a novel progression for fast predicting the severity of the line and clustering by incorporating machine learning aspects.The polynomial load modelling or ZIP(constant impedances(Z),Constant Current(I)and Constant active power(P))is developed in the IEEE-14 and Indian 118 bus systems considered for analysis of power system security.The process of finding the severity of the line using a Hybrid Line Stability Ranking Index(HLSRI)is used for assisting the concepts of machine learning with J48 algorithm,infers the superior affected lines by adopting the IEEE standards in concern to be compensated in maintaining the power system stability.The simulation is performed in the WEKA environment and deals with the supervisor learning in order based on severity to ensure the safety of power system.The Unified Power Flow Controller(UPFC),facts devices for the purpose of compensating the losses by maintaining the voltage characteristics.The finite element analysis findings are compared with the existing procedures and numerical equations for authentications.
文摘In this paper, a set of variational formulas of solving nonlinear instability critical loads are established from the viewpoint of variational principle. The paper shows that it is very convenient to solve nonlinear instability critical load by using the variational formulas suggested in this paper.
基金supported by the National Basic Research Program(973 Program)of China(2011CB711100 and 2014CB046801)the National Natural Science Foundation of China(11072246 and51490673)the Knowledge Innovation Program of Chinese Academy of Sciences(KJCX2-EW-L01)
文摘The influences of steady aerodynamic loads on hunting stability of high-speed railway vehicles were investigated in this study.A mechanism is suggested to explain the change of hunting behavior due to actions of aerodynamic loads：the aerodynamic loads can change the position of vehicle system（consequently the contact relations）,the wheel/rail normal contact forces,the gravitational restoring forces/moments and the creep forces/moments.A mathematical model for hunting stability incorporating such influences was developed.A computer program capable of incorporating the effects of aerodynamic loads based on the model was written,and the critical speeds were calculated using this program.The dependences of linear and nonlinear critical speeds on suspension parameters considering aerodynamic loads were analyzed by using the orthogonal test method,the results were also compared with the situations without aerodynamic loads.It is shown that the most dominant factors a ff ecting linear and nonlinear critical speeds are different whether the aerodynamic loads considered or not.The damping of yaw damper is the most dominant influencing factor for linear critical speeds,while the damping of lateral damper is most dominant for nonlinear ones.When the influences of aerodynamic loads are considered,the linear critical speeds decrease with the rise of cross wind velocity,whereas it is not the case for the nonlinear critical speeds.The variation trends of critical speeds with suspension parameters can be significantly changed by aerodynamic loads.Combined actions of aerodynamic loads and suspension parameters also a ff ect the critical speeds.The effects of such joint action are more obvious for nonlinear critical speeds.
基金Supported by the Program of Yunnan Provincial Institute of Communications Planning,Design and Research (2011(D)11-b)
文摘The vibration characteristics and dynamic responses of rock and soil under seismic load can be estimated with dynamic finite element method （DFEM）. Combining with the DFEM, the vector sum analysis method （VSAM） is employed in seismic stability analysis of a slope in this paper. Different from other conventional methods, the VSAM is proposed based on the vector characteristic of force and current stress state of the slope. The dynamic stress state of the slope at any moment under seismic load can he obtained by the DFEM, thus the factor of safety of the slope at any moment during earthquake can be easily obtained with the VSAM in consideration of the DFEM. Then, the global stability of the slope can be estimated on the basis of time-history curve of factor of safety and reliability theory. The VSAM is applied to a homogeneous slope under seismic load. The factor of safety of the slope is 1.30 under gravity only and the dynamic factor of safety under seismic load is 1.21. The calculating results show that the dynamic characteristics and stability state of the slope with input ground motion can be actually analyzed. It is believed that the VSAM is a feasible and practical approach to estimate the dynamic stability of slopes under seismic load.
文摘The limit equilibrium method （LEM） is widely used for sliding stability evaluation of concrete gravitydams. Failure is then commonly assumed to occur along the entire sliding surface simultaneously.However, the brittle behaviour of bonded concrete-rock contacts, in combination with the varying stressover the interface, implies that the failure of bonded dam-foundation interfaces occurs progressively. Inaddition, the spatial variation in cohesion may introduce weak spots where failure can be initiated.Nonetheless, the combined effect of brittle failure and spatial variation in cohesion on the overall shearstrength of the interface has not been studied previously. In this paper, numerical analyses are used toinvestigate the effect of brittle failure in combination with spatial variation in cohesion that is taken intoaccount by random fields with different correlation lengths. The study concludes that a possible existenceof weak spots along the interface has to be considered since it significantly reduces the overallshear strength of the interface, and implications for doing so are discussed.
基金Project(2015M580702)supported by the China Postdoctoral Science FoundationProject(51608541)supported by the National Natural Science Foundation of ChinaProject(2014122006)supported by the Guizhou Provincial Department of Transportation Foundation,China
文摘Two calculation modes for the effect of external load on slope stability, i.e., mode I in which the external load is thought to act on slope surface, and mode II in which the external load is thought to act on slip surface along the force action line, were considered. Meanwhile, four basic distribution patterns of external load were used, of which complex external loads could be composed. In analysis process, several limit equilibrium methods, such as Swedish method, simplified Bishop method, simplified Janbu method, Spencer method, Morgenstern-Price(M-P) method, Sarma method, and unbalanced thrust method, were also adopted to contrast their differences in slope stability under the external load. According to parametric analysis, some conclusions can be obtained as follows:(1) The external load, with the large magnitude, small inclination angle, and acting position close to the slope toe,has more positive effect on slope stability;(2) The results calculated using modes I and II of external load are similar, indicating that the calculation mode of external load has little influence on slope stability;(3) If different patterns of external loads are equivalent to each other, their slope stability under these external loads are the same, and if not, the external load leads to the better slope stability,as action position of the resultant force for external load is closer to the lower sliding point of slip surface.
基金the financial support from Natural Science Foundation of Chongqing,China(cstc2018jcyjAX0632)the Venture&Innovation Support Program for Chongqing Overseas Returnees(cx2017123)+1 种基金as well as Chongqing Engineering Research Center of Disaster Prevention&Control for Banks and Structures in Three Gorges Reservoir Area(SXAPGC18ZD01,SXAPGC18YB03)In addition,the authors would like to express their appreciation to Liu et al.[Liu,Zhang and Fu(2014)]for making their test results available for this work.
文摘Temporal variation of rock mass properties,especially the strength degradation due to drying-wetting cycles as well as the acidic wetting fluid(rainfall or reservoir water)is crucial to stability of reservoir rock slopes.Based on a series of drying-wetting cycling and experiments considering the influences of pH values,the degradation degree models of the reduced cohesion𝑐𝑐′,friction angle𝜑𝜑′are developed.2D stability analysis of the slope is subsequently carried out to calculate the factor of safety(Fs)via limit equilibrium method(LEM)and a predictive model of Fs is built using multivariate adaptive regression splines(MARS),revealing the effect of the drying-wetting cycles and pH value.The reliability analysis by Monte Carlo simulation is performed to rationally consider the uncertainty and the temporal variation of the shear strength parameters of rock mass.Results indicate that the MARS-based model can estimate the Fs accurately.The Fs and the reliability indexβdecrease with increase of drying-wetting cycles,and the temporal variation of rock mass properties has significant influence on the slope reliability.Overlooking the temporal variation of rock properties may overestimate the Fs and reliability indexβin the longer term.
基金by the National Natural Science Foundation of China(No.52174114)the State Key Laboratory of Hydroscience and Engineering of Tsinghua University(No.61010101218).
文摘Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77 field cases,5 quantitative indicators are selected to improve the accuracy of prediction models for slope stability.These indicators include slope angle,slope height,internal friction angle,cohesion and unit weight of rock and soil.Potential data aggregation in the prediction of slope stability is analyzed and visualized based on Six-dimension reduction methods,namely principal components analysis(PCA),Kernel PCA,factor analysis(FA),independent component analysis(ICA),non-negative matrix factorization(NMF)and t-SNE(stochastic neighbor embedding).Combined with classic machine learning methods,7 prediction models for slope stability are established and their reliabilities are examined by random cross validation.Besides,the significance of each indicator in the prediction of slope stability is discussed using the coefficient of variation method.The research results show that dimension reduction is unnecessary for the data processing of prediction models established in this paper of slope stability.Random forest(RF),support vector machine(SVM)and k-nearest neighbour(KNN)achieve the best prediction accuracy,which is higher than 90%.The decision tree(DT)has better accuracy which is 86%.The most important factor influencing slope stability is slope height,while unit weight of rock and soil is the least significant.RF and SVM models have the best accuracy and superiority in slope stability prediction.The results provide a new approach toward slope stability prediction in geotechnical engineering.
文摘The genetic stability of variations of main agronomic characteristics in progenies from the regenerated plants of immature embryo culture in vitro was studied. The results showed that the variations of earliness in maturity, high 1000-grain weight, plant height and grain weight per spike were heritable and tended to be stable in IE3 and completely stable in IE4 The wide variation of main agronomic characteristics induced by embryo culture in vitro provided the probability of selection in wheat improvement. Some somaclonal lines with useful variations could be used directly in wheat production.
基金Supported bythe National High-Tech Research and Development Plan (National"863"Plan) (No2006AA04Z115)Tianjin Science andTechnology Key Project (No05YFGDGX08700)
文摘To analyze the physical structure of assembly process and assure product quality, the quality stability of multi-station assembly process was investigated. First, the assembly process was modeled as a one-dimensional discrete variant system by state space equation based on variation stream. Then, the criterion to judge whether the process is stable or not and the index, stability degree, to show the level of stability were proposed by analyzing the bounded-input bounded-output (BIBO) stability of system. Finally, a simulated example of a sheet metal assembly process with three stations, was provided to verify the effectiveness of the proposed method.
文摘In this paper, to begin with. the nonlinear differential equations of a truncaled shallow spherical shell with variable thickness under uniformal distributed load are linearized by step-by-step loading method. The linear differential equations can be solved by spline collocanon method. Critical loads have been obtained accordingly.
文摘This paper presents a newly developed proximity indicator for voltage stability assessment which can be used to predict critical real system load and voltages at various load buses at critical loading point.The proximity indicator varies almost parabolic with total real load demand and reaches orthogonally to real load axis.This relation has been utilized to predict critical loading point.It has been shown that two operating points are needed for estimating critical point and proper selection of operating points and variation of proximity indicator near collapse point highly affect the accuracy of estimation.Simulation is based on load flow equations and system real and reactive loadings have been increased in proportion with base case scenario for IEEE 14 and IEEE 25 bus test systems to demonstrate the behaviour of proposed proximity indicator.CPF has been used as benchmark to check the accuracy of estimation.
文摘this paper gives the resultant forces and moments strain energy and work of external forces on the basis of the deformation theory of flexible body therefore in aqcfordance with the principle of virtual displacement the energy criterion of critical lad is obtained and the equilibrium equation and boundary conditions of stability problem are derived
文摘Slope stability is one of the most important subjects of geotechnics. The slope top-loading plays a key role in the stability of slopes in hill slope areas. When the building load is too large or the point of action from the shoulder is too close, the shear stress of the slope will be significantly greater than its shear strength, resulting in reduced slope stability. Therefore, it is of great importance to study the relationship between the building load and the stability of the slope. This study aims to analyze the influence of different building loads applied at different distances on the top of the slope and deduces their effects on the slope stability. For this purpose, a three-dimensional slope model under different building loads with different distances to the slope shoulder was established using the finite-difference analysis software Flac3D. The results show that the loads applied at different distances on the top of the slope have different effects on the slope stability. The slope factor of safety (FOS) increases with the increase of the distance between the top-loading and the slope shoulder;it varies from 1.37 to 1.53 for the load P = 120 KPa, 1.27 to 1.53 for the load P = 200 KPa, and from 1.18 to 1.44 for P = 300 KPa, resulting in the decrease of the coincidence area between the load-deformation and the potential sliding surface. The slope is no longer affected by the potential risk of sliding at approximately 20 m away from the slope shoulder.
文摘This paper describes scientific research conducted to highlight the potential of an integrated GPR-UAV system in engineering-geological applications.The analysis focused on the stability of a natural scree slope in the Germanasca Valley,in the western Italian Alps.As a consequence of its steep shape and the related geological hazard,the study used different remote sensed methodologies such as UAV photogrammetry and geophysics survey by a GPR-drone integrated system.Furthermore,conventional in-situ surveys led to the collection of geological and geomorphological data.The use of the UAV-mounted GPR allowed us to investigate the bedrock depth under the detrital slope deposit,using a non-invasive technique able to conduct surveys on inaccessible areas prone to hazardous conditions for operators.The collected evidence and the results of the analysis highlighted the stability of the slope with Factors of Safety,verified in static conditions(i.e.,natural static condition and static condition with snow cover),slightly above the stability limit value of 1.On the contrary,the dynamic loading conditions(i.e.,seismic action applied)showed a Factor of Safety below the stability limit value.The UAV-mounted GPR represented an essential contribution to the surveys allowing the definition of the interface debris deposit-bedrock,which are useful to design the slope model and to evaluate the scree slope stability in different conditions.
基金Project(2015M580491)supported by the China Postdoctoral Science FoundationProject(51404262)supported by the National Natural Science Foundation of China+1 种基金Project(2014XT01)supported by the Research Funds for the Central Universities,ChinaProject supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The purpose of this work was to explore the influence law of vibration load on rock mass structure and slope stability.Based on the type and transmission way of vibration stress wave,the main stress in the horizontal and vertical directions was analyzed and the superposition effect of the stress wave was revealed.After the mechanical analysis of the sliding mass,the calculation formulas of the anti-sliding force and the sliding force were derived and the damage mechanism of blasting vibration to the structural plane was defined.In addition,according to the structure and lithologic parameter of the slope as well as the vibration monitoring data,the west slope stability of Xiaolongtan open pit mine was analyzed.The results show that the time-dependent stability factor is proportional to the vibration speed and the peak values appear at the same time.Vibration load promotes the breakage of the structural plane leading to the drop of the west slope stability factor by 0.23%.Under the multipoint simultaneous blasting,the fluctuating laws of the stability factors are consistent.The more the start-up points are,the higher the weakening degree to the slope stability is.Under the multipoint allochronic blasting,the stability factor depends on the synthetic waveform structure of all vibration waves.The greater the blasting time difference is,the lower the weakening degree to the slope stability is.Selecting the reasonable quantity of start-up points and time difference could fully reduce the adverse influence of vibration load to slope stability.
