In order to comprehend the dynamic disaster mechanism induced by overburden rock caving during the advancement of a coal mining face, a physical simulation model is constructed basing on the geological condition of th...In order to comprehend the dynamic disaster mechanism induced by overburden rock caving during the advancement of a coal mining face, a physical simulation model is constructed basing on the geological condition of the 21221 mining face at Qianqiu coal mine in Henan Province, China. This study established, a comprehensive monitoring system to investigate the interrelations and evolutionary characteristics among multiple mechanical parameters, including mining-induced stress, displacement, temperature, and acoustic emission events during overburden rock caving. It is suggested that, despite the uniformity of the overburden rock caving interval, the main characteristic of overburden rock lies in its uneven caving strength. The mining-induced stress exhibits a reasonable interrelation with the displacement, temperature, and acoustic emission events of the rock strata. With the advancement of the coal seam, the mining-induced stress undergoes four successive stages: gentle stability, gradual accumulation, high-level mutation, and a return to stability. The variations in other mechanical parameters does not synchronize with the signifcant changes in mining-induced stress. Before the collapse of overburden rock occurs, rock strata temperature increment decreases and the acoustic emission ringing counts surges with the increase of rock strata displacement and mining-induced stress. Therefore, the collaborative characteristics of mining-induced stress, displacement, temperature, and acoustic emission ringing counts can be identifed as the precursor information or overburden rock caving. These results are in good consistent with on-site situation in the coal mine.展开更多
Because of complexity and non-predictability of the tunnel surrounding rock, the problem with the determination of the physical and mechanical parameters of the surrounding rock has become a main obstacle to theoretic...Because of complexity and non-predictability of the tunnel surrounding rock, the problem with the determination of the physical and mechanical parameters of the surrounding rock has become a main obstacle to theoretical research and numerical analysis in tunnel engineering. During design, it is a frequent practice, therefore, to give recommended values by analog based on experience. It is a key point in current research to make use of the displacement back analytic method to comparatively accurately determine the parameters of the surrounding rock whereas artificial intelligence possesses an exceptionally strong capability of identifying, expressing and coping with such complex non-linear relationships. The parameters can be verified by searching the optimal network structure, using back analysis on measured data to search optimal parameters and performing direct computation of the obtained results. In the current paper, the direct analysis is performed with the biological emulation system and the software of Fast Lagrangian Analysis of Continua (FLAC3D. The high non-linearity, network reasoning and coupling ability of the neural network are employed. The output vector required of the training of the neural network is obtained with the numerical analysis software. And the overall space search is conducted by employing the Adaptive Immunity Algorithm. As a result, we are able to avoid the shortcoming that multiple parameters and optimized parameters are easy to fall into a local extremum. At the same time, the computing speed and efficiency are increased as well. Further, in the paper satisfactory conclusions are arrived at through the intelligent direct-back analysis on the monitored and measured data at the Erdaoya tunneling project. The results show that the physical and mechanical parameters obtained by the intelligent direct-back analysis proposed in the current paper have effectively improved the recommended values in the original prospecting data. This is of practical significance to the appraisal of stability and informationization design of the surrounding rock.展开更多
To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal test...To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal tests on rock samples to investigate the correlations between macro-and meso-level mechanical parameters of rock-like bonded granular materials. Then based on the artificial intelligent technology, the intelligent prediction systems for nine meso-level mechanical parameters of PFC models were obtained by creating, training and testing the prediction models with the set of data got from the orthogonal tests. Lastly the prediction systems were used to predict the meso-level mechanical parameters of one kind of sandy mudstone, and according to the predicted results the macroscopic properties of the rock were obtained by numerical tests. The maximum relative error between the numerical test results and real rock properties is 3.28% which satisfies the precision requirement in engineering. It shows that this paper provides a fast and accurate method for the determination of meso-level mechanical parameters of PFC models.展开更多
Shale mechanical properties are important for shale gas production,but the magnitudes are difficult to estimate,standard size cores are hard to sample,and secondary interstice generation is inevitable.This paper propo...Shale mechanical properties are important for shale gas production,but the magnitudes are difficult to estimate,standard size cores are hard to sample,and secondary interstice generation is inevitable.This paper proposes a method for determining shale macroscale modulus,which is determined at a hierarchy of scales from the nano-to macro-scales.Microscale measurements are upscaled to estimate the corresponding magnitudes at the macroscale.A case study is conducted with Silurian shale samples,using the hierarchy scales,gridding nanoindentation,atomic force microscopy(AFM),mineral liberation analysis(MLA),X-ray diffraction(XRD),and uniaxial compression tests.The mineral compositions are analyzed using MLA and XRD,and the shale composition is described in terms of clay minerals,organic matter,and siliceous and carbonate contents.The variation in the Young’s modulus is analyzed based on the recorded indentation depth curves and modulus distributions.The nanoindentation and AFM results are upscaled to the centimeter scale through the Mori-Tanaka method.The upscaled results exhibit satisfactory fitting with the conventional uniaxial compression results,although the fitting of the upscaled AFM results is better than nanoindentation.The proposed approach can be applied to promptly and comprehensively predict the shale mechanical parameters during shale gas exploration.展开更多
The failure of cement sheath integrity can be easily caused by alternating pressure during large-scale multistage hydraulic fracturing in shale-gas well.An elastic-plastic mechanical model of casing-cement sheath-form...The failure of cement sheath integrity can be easily caused by alternating pressure during large-scale multistage hydraulic fracturing in shale-gas well.An elastic-plastic mechanical model of casing-cement sheath-formation(CSF)system under alternating pressure is established based on the Mohr-Coulomb criterion and thick-walled cylinder theory,and it has been solved by MATLAB programming combining global optimization algorithm with Global Search.The failure mechanism of cement sheath integrity is investigated,by which it can be seen that the formation of interface debonding is mainly related to the plastic strain accumulation,and there is a risk of interface debonding under alternating pressure,once the cement sheath enters plasticity whether in shallow or deep well sections.The matching relationship between the mechanical parameters(elastic modulus and Poisson's ratio)of cement sheath and its integrity failure under alternating pressure in whole well sections is studied,by which it has been found there is a“critical range”in the Poisson's ratio of cement sheath.When the Poisson's ratio is below the“critical range”,there is a positive correlation between the yield internal pressure of cement sheath(SYP)and its elastic modulus.However,when the Poisson's ratio is above the“critical range”,there is a negative correlation.The elastic modulus of cement sheath is closely related to its Poisson's ratio,and restricts each other.Scientific and reasonable matching between mechanical parameters of cement sheath and CSF system under different working conditions can not only reduce the cost,but also protect the cement sheath integrity.展开更多
Determination of rock mechanical parameters is the most important step in rock mass quality evaluation and has significant impacts on geotechnical engineering practice.Rock mass integrity coefficient(KV)is one of the ...Determination of rock mechanical parameters is the most important step in rock mass quality evaluation and has significant impacts on geotechnical engineering practice.Rock mass integrity coefficient(KV)is one of the most efficient parameters,which is conventionally determined from boreholes.Such approaches,however,are time-consuming and expensive,offer low data coverage of point measurements,require heavy equipment,and are hardly conducted in steep topographic sites.Hence,borehole approaches cannot assess the subsurface thoroughly for rock mass quality evaluation.Alternatively,use of geophysical methods is non-invasive,rapid and economical.The proposed geophysical approach makes useful empirical correlation between geophysical and geotechnical parameters.We evaluated the rock mass quality via integration between KV measured from the limited boreholes and inverted resistivity obtained from electrical resistivity tomography(ERT).The borehole-ERT correlation provided KV along various geophysical profiles for more detailed 2D/3D(two-/three-dimensional)mapping of rock mass quality.The subsurface was thoroughly evaluated for rock masses with different engineering qualities,including highly weathered rock,semi-weathered rock,and fresh rock.Furthermore,ERT was integrated with induced polarization(IP)to resolve the uncertainty caused by water/clay content.Our results show that the proposed method,compared with the conventional approaches,can reduce the ambiguities caused by inadequate data,and give more accurate insights into the subsurface for rock mass quality evaluation.展开更多
The responses of cement mortar specimens of different dimensions under compression and tension were calculated based on the discrete element method with the modified-rigid-body-spring concrete model,in which the mecha...The responses of cement mortar specimens of different dimensions under compression and tension were calculated based on the discrete element method with the modified-rigid-body-spring concrete model,in which the mechanical parameters derived from macro-scale material tests were applied directly to the mortar elements.By comparing the calculated results with those predicted by the Carpinteri andWeibull size effects laws,a series of formulas to convert the macro-scale mechanical parameters of mortar and interface to those at the meso-scale were proposed through a fitting analysis.Based on the proposed formulas,numerical simulation of axial compressive and tensile failure processes of concrete and cement mortar materials,respectively were conducted.The calculated results were a good match with the test results.展开更多
In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emi...In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emission from the quantum level n+1 to level n can be deduced from the orbital angular momentum examined in the hydrogen atom. This time is found precisely equal to the time interval dictated by the Joule-Lenz law governing the electron transition between the levels n+1 and n. In the next step, the mechanical parameters entering the quantum systems are applied in calculating the time intervals characteristic for the electron transitions. This concerns the neighbouring energy levels in the hydrogen atom as well as the Landau levels in the electron gas submitted to the action of a constant magnetic field.展开更多
Half-metallic ferromagnetism,mechanical as well as thermoelectric properties for rare earth-based spinels MgHo_(2)Z_(4)(Z=S,Se)were investigated using density functional theory(DFT).Structural optimization was done wi...Half-metallic ferromagnetism,mechanical as well as thermoelectric properties for rare earth-based spinels MgHo_(2)Z_(4)(Z=S,Se)were investigated using density functional theory(DFT).Structural optimization was done with Perdew-Burke-Ehrenzorf(PBE)sol-generalized gradient approximation(GGA)to calculate the lattice constant of both spinels comparable to experimental data.In addition,Born stability criteria and negative formation energy show that our studied spinels are also structurally and dynamically stable in the cubic phase.For ferromagnetic(FM)state stability,we also calculated the energy differences among FM,antiferromagnetic(AFM),and non-magnetic(NM)states.Additionally,Curie temperatures of ferromagnetic phases were also estimated.We used Trans-Blaha improved BeckeJohnson(TB-mBJ)potential functional for electronics as well as magnetic characteristics,which lead to the consistent explanation of half-metallic ferromagnetism,representing the whole band-occupancy in material with exact detail of density of states(DOS).The stable FM state was examined in spinels due to the exchange splitting of Ho cation consisting of p-d hybridizations compatible with the result achieved for electronics band structure and DOS.Further,spin magnetic moment was explained in terms of anion,cation,and sharing charge on studied spinels.In addition,the calculated thermoelectric properties clearly show that operation range of these systems may be utilized by future experimental works for identifying the potential applications of these systems.展开更多
In the evaluation of a petroleum reserve,it is necessary to accurately determine certain petrophysical properties such as porosity and permeability of the reservoir rocks and rock mechanical properties.Petrophysical p...In the evaluation of a petroleum reserve,it is necessary to accurately determine certain petrophysical properties such as porosity and permeability of the reservoir rocks and rock mechanical properties.Petrophysical properties are key factors in the reservoir descniption and geomechanical properties are determining parameters in drilling operations and in stimulation and hydraulic fracturing jobs and also the development plans for given reservoir.It is more convenient to use homogenous rock samples with nearly constant initial permeability;however,obtaining such cores is very difficult.In this paper a simulated natural and homogeneous compacted sandstone rock with known physical and petrophysical propertie were used.Physical properties of reservoir rocks incude pore size distribution;grain size,cementing material concentration,and confining pressure affect rock porosity and pemmeability.Sound wave velocity was measured using an ultra sound tool on different sandstone core samples.Good cor-relations have been developed between sound wave velocity(Vp and Vs)the petrophysical properties mainly porosity and permeability.Significant correlations have been found between seismic wave ve-locity(Vp,Vs and VpVs)and mechanical parameters namely Young's modulus,shear modulus,bulk modulus and Poison's atio for sandstone core samples.This study has been carried out on dry core samples and core samples with different water saturations and results showed that there are changes in the correlation between seismic wave velocity and mechanical and ptrophysical properties as function of water saturation change from dry rock to water wet rock.展开更多
In order to explore the mechanical properties and breaking behavior of pellet feed during chewing,the experiments of texture mechanics,followed by the modeling and simulation of pellet feed based on the discrete eleme...In order to explore the mechanical properties and breaking behavior of pellet feed during chewing,the experiments of texture mechanics,followed by the modeling and simulation of pellet feed based on the discrete element method were carried out in this research.Five wet basis moisture contents(8%,10%,12%,14%and 16%,respectively),two kinds of loading directions(L and D direction,respectively)of pig pellet feed were selected as variables.First,mechanical parameters including hardness,elasticity,tackiness and chewiness were measured by a texture analyzer.The results of compression tests showed that the hardness of pig pellet feed was 5.44-32.43 N,the elastic index was 0.04-0.94 mm,the tackiness was 0.07-6.63 N,the chewiness was 5.52-27.39 mJ.Moreover,the hardness,tackiness and chewiness of pig pellet feed decreased significantly with the increase of moisture content but the elasticity showed an adverse varying trend.The hardness,elasticity,tackiness and chewiness along D direction outweighed that of L direction in numerical data at the same moisture content.Then,the chewing and breaking processes of pellet feed were simulated based on the discrete element method(DEM)combined with bonding particle model,in which the whole pellet feed were considered as agglomerations of micro-particles and broke when the stress between micro-particles had exceeded the maximum limit.Multi-parameter optimization experiments were carried out using quadratic orthogonal rotation design,in which stiffness coefficient(X_(1)),critical stress(X2)and bonding radius(X_(3))were the influencing factors,hardness(Y_(1)),elasticity(Y_(2)),tackiness(Y_(3))and chewiness(Y_(4))were evaluating indicators.Based on the regression analysis of the Design-Expert 8.0.6 software and response surface analysis method,the relationship between the three influencing factors and evaluating indicators was established.The similarity between experimental and simulated results in feed morphology and mechanical index proved that the modeling method for pellet feed based on DEM was effective and accurate.This work can provide a reference for the feed forming process and the optimization design of the related feed machinery.Meanwhile,the DEM model provided a new method for evaluating the texture and palatability of pellet feed.展开更多
This paper proposes an advanced method for estimating numerous parameters in a wind-energy-conversion system with high precision,especially in a transient state,including the rotation speed and mechanical torque of th...This paper proposes an advanced method for estimating numerous parameters in a wind-energy-conversion system with high precision,especially in a transient state,including the rotation speed and mechanical torque of the turbine as well as wind velocity.The suggested approach is designed into two parts.First,a fourth-order Luenberger observer is proposed to take into account the significant fluctuations of the mechanical torque that can be caused by wind gusts.This observer provides an accurate estimate of speed and mechanical torque in all weather conditions and especially when the wind is gusting.At the same time,the wind velocity is calculated using the Luenberger observer outputs and a model of the mechanical power generated by the turbine.Second,these estimated parameters are exploited as input in a maximum-power-point tracking(MPPT)algorithm using the tip-speed ratio(TSR)to improve the sensorless strategy control.Simulation results were performed using MATLAB®/Simulink®for both wind gust and real wind profiles.We have verified that for wind gusts with jumps ranging from 3 to 7 m/s,the new observer manages to better follow the rotation speed and the torque of the turbine compared to a usual observer.In addition,we demonstrated that by applying the proposed estimator in the improved TSR-MPPT strategy,it is possible to extract 3.3%more energy compared to traditional approaches.展开更多
基金supported by the State Key Research Development Program of China(2022YFC3004602)Independent Research fund of Joint NationalLocal Engineering Research Centre for Safe and Precise Coal Mining(Anhui University of Science and Technology)(EC2022001)+2 种基金the National Natural Science Foundation of China(41872205)Beijing Natural Science Foundation(8202041)the Fundamental Research Funds for the Central Universities(2022YJSLJ08,2022JCCXNY03).
文摘In order to comprehend the dynamic disaster mechanism induced by overburden rock caving during the advancement of a coal mining face, a physical simulation model is constructed basing on the geological condition of the 21221 mining face at Qianqiu coal mine in Henan Province, China. This study established, a comprehensive monitoring system to investigate the interrelations and evolutionary characteristics among multiple mechanical parameters, including mining-induced stress, displacement, temperature, and acoustic emission events during overburden rock caving. It is suggested that, despite the uniformity of the overburden rock caving interval, the main characteristic of overburden rock lies in its uneven caving strength. The mining-induced stress exhibits a reasonable interrelation with the displacement, temperature, and acoustic emission events of the rock strata. With the advancement of the coal seam, the mining-induced stress undergoes four successive stages: gentle stability, gradual accumulation, high-level mutation, and a return to stability. The variations in other mechanical parameters does not synchronize with the signifcant changes in mining-induced stress. Before the collapse of overburden rock occurs, rock strata temperature increment decreases and the acoustic emission ringing counts surges with the increase of rock strata displacement and mining-induced stress. Therefore, the collaborative characteristics of mining-induced stress, displacement, temperature, and acoustic emission ringing counts can be identifed as the precursor information or overburden rock caving. These results are in good consistent with on-site situation in the coal mine.
基金supported by the National Natural Science Foundation of China (No.50609028)
文摘Because of complexity and non-predictability of the tunnel surrounding rock, the problem with the determination of the physical and mechanical parameters of the surrounding rock has become a main obstacle to theoretical research and numerical analysis in tunnel engineering. During design, it is a frequent practice, therefore, to give recommended values by analog based on experience. It is a key point in current research to make use of the displacement back analytic method to comparatively accurately determine the parameters of the surrounding rock whereas artificial intelligence possesses an exceptionally strong capability of identifying, expressing and coping with such complex non-linear relationships. The parameters can be verified by searching the optimal network structure, using back analysis on measured data to search optimal parameters and performing direct computation of the obtained results. In the current paper, the direct analysis is performed with the biological emulation system and the software of Fast Lagrangian Analysis of Continua (FLAC3D. The high non-linearity, network reasoning and coupling ability of the neural network are employed. The output vector required of the training of the neural network is obtained with the numerical analysis software. And the overall space search is conducted by employing the Adaptive Immunity Algorithm. As a result, we are able to avoid the shortcoming that multiple parameters and optimized parameters are easy to fall into a local extremum. At the same time, the computing speed and efficiency are increased as well. Further, in the paper satisfactory conclusions are arrived at through the intelligent direct-back analysis on the monitored and measured data at the Erdaoya tunneling project. The results show that the physical and mechanical parameters obtained by the intelligent direct-back analysis proposed in the current paper have effectively improved the recommended values in the original prospecting data. This is of practical significance to the appraisal of stability and informationization design of the surrounding rock.
基金the National Natural Science Foundation of China (Nos. 50674083 and 51074162) for its financial support
文摘To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal tests on rock samples to investigate the correlations between macro-and meso-level mechanical parameters of rock-like bonded granular materials. Then based on the artificial intelligent technology, the intelligent prediction systems for nine meso-level mechanical parameters of PFC models were obtained by creating, training and testing the prediction models with the set of data got from the orthogonal tests. Lastly the prediction systems were used to predict the meso-level mechanical parameters of one kind of sandy mudstone, and according to the predicted results the macroscopic properties of the rock were obtained by numerical tests. The maximum relative error between the numerical test results and real rock properties is 3.28% which satisfies the precision requirement in engineering. It shows that this paper provides a fast and accurate method for the determination of meso-level mechanical parameters of PFC models.
基金supported by the National Natural Science Foundation of China(Grant No.42072194,U1910205)the Fundamental Research Funds for the Central Universities(800015Z1190,2021YJSDC02)
文摘Shale mechanical properties are important for shale gas production,but the magnitudes are difficult to estimate,standard size cores are hard to sample,and secondary interstice generation is inevitable.This paper proposes a method for determining shale macroscale modulus,which is determined at a hierarchy of scales from the nano-to macro-scales.Microscale measurements are upscaled to estimate the corresponding magnitudes at the macroscale.A case study is conducted with Silurian shale samples,using the hierarchy scales,gridding nanoindentation,atomic force microscopy(AFM),mineral liberation analysis(MLA),X-ray diffraction(XRD),and uniaxial compression tests.The mineral compositions are analyzed using MLA and XRD,and the shale composition is described in terms of clay minerals,organic matter,and siliceous and carbonate contents.The variation in the Young’s modulus is analyzed based on the recorded indentation depth curves and modulus distributions.The nanoindentation and AFM results are upscaled to the centimeter scale through the Mori-Tanaka method.The upscaled results exhibit satisfactory fitting with the conventional uniaxial compression results,although the fitting of the upscaled AFM results is better than nanoindentation.The proposed approach can be applied to promptly and comprehensively predict the shale mechanical parameters during shale gas exploration.
基金Research work was financed by the National Natural Science Foundation of China(No.52074232)Sichuan Science and Technology Program(No.2022NSFSC0028,No.2022NSFSC0994).Without their support,this work would not have been possible.
文摘The failure of cement sheath integrity can be easily caused by alternating pressure during large-scale multistage hydraulic fracturing in shale-gas well.An elastic-plastic mechanical model of casing-cement sheath-formation(CSF)system under alternating pressure is established based on the Mohr-Coulomb criterion and thick-walled cylinder theory,and it has been solved by MATLAB programming combining global optimization algorithm with Global Search.The failure mechanism of cement sheath integrity is investigated,by which it can be seen that the formation of interface debonding is mainly related to the plastic strain accumulation,and there is a risk of interface debonding under alternating pressure,once the cement sheath enters plasticity whether in shallow or deep well sections.The matching relationship between the mechanical parameters(elastic modulus and Poisson's ratio)of cement sheath and its integrity failure under alternating pressure in whole well sections is studied,by which it has been found there is a“critical range”in the Poisson's ratio of cement sheath.When the Poisson's ratio is below the“critical range”,there is a positive correlation between the yield internal pressure of cement sheath(SYP)and its elastic modulus.However,when the Poisson's ratio is above the“critical range”,there is a negative correlation.The elastic modulus of cement sheath is closely related to its Poisson's ratio,and restricts each other.Scientific and reasonable matching between mechanical parameters of cement sheath and CSF system under different working conditions can not only reduce the cost,but also protect the cement sheath integrity.
基金supported by Xinjiang Key Laboratory of Geohazards Prevention(Grant No.XKLGP2022K07)Key R&D Program of Xinjiang Uygur Autonomous Region(Grant No.2022B03001-2)the Third Xinjiang Scientific Expedition Program(Grant No.2022xjkk1305).
文摘Determination of rock mechanical parameters is the most important step in rock mass quality evaluation and has significant impacts on geotechnical engineering practice.Rock mass integrity coefficient(KV)is one of the most efficient parameters,which is conventionally determined from boreholes.Such approaches,however,are time-consuming and expensive,offer low data coverage of point measurements,require heavy equipment,and are hardly conducted in steep topographic sites.Hence,borehole approaches cannot assess the subsurface thoroughly for rock mass quality evaluation.Alternatively,use of geophysical methods is non-invasive,rapid and economical.The proposed geophysical approach makes useful empirical correlation between geophysical and geotechnical parameters.We evaluated the rock mass quality via integration between KV measured from the limited boreholes and inverted resistivity obtained from electrical resistivity tomography(ERT).The borehole-ERT correlation provided KV along various geophysical profiles for more detailed 2D/3D(two-/three-dimensional)mapping of rock mass quality.The subsurface was thoroughly evaluated for rock masses with different engineering qualities,including highly weathered rock,semi-weathered rock,and fresh rock.Furthermore,ERT was integrated with induced polarization(IP)to resolve the uncertainty caused by water/clay content.Our results show that the proposed method,compared with the conventional approaches,can reduce the ambiguities caused by inadequate data,and give more accurate insights into the subsurface for rock mass quality evaluation.
基金The financial support from the National Natural Science Foundation of China(Grant No.50978191)is sincerely acknowledged by the authors.
文摘The responses of cement mortar specimens of different dimensions under compression and tension were calculated based on the discrete element method with the modified-rigid-body-spring concrete model,in which the mechanical parameters derived from macro-scale material tests were applied directly to the mortar elements.By comparing the calculated results with those predicted by the Carpinteri andWeibull size effects laws,a series of formulas to convert the macro-scale mechanical parameters of mortar and interface to those at the meso-scale were proposed through a fitting analysis.Based on the proposed formulas,numerical simulation of axial compressive and tensile failure processes of concrete and cement mortar materials,respectively were conducted.The calculated results were a good match with the test results.
文摘In the first step, the Ehrenfest reasoning concerning the adiabatic invariance of the angular orbital momentum is applied to the electron motion in the hydrogen atom. It is demonstrated that the time of the energy emission from the quantum level n+1 to level n can be deduced from the orbital angular momentum examined in the hydrogen atom. This time is found precisely equal to the time interval dictated by the Joule-Lenz law governing the electron transition between the levels n+1 and n. In the next step, the mechanical parameters entering the quantum systems are applied in calculating the time intervals characteristic for the electron transitions. This concerns the neighbouring energy levels in the hydrogen atom as well as the Landau levels in the electron gas submitted to the action of a constant magnetic field.
基金the Deanship of Scientific Research at King Khalid University for funding this work through the small Groups Project under grant number(R.G.P.1/153/43)。
文摘Half-metallic ferromagnetism,mechanical as well as thermoelectric properties for rare earth-based spinels MgHo_(2)Z_(4)(Z=S,Se)were investigated using density functional theory(DFT).Structural optimization was done with Perdew-Burke-Ehrenzorf(PBE)sol-generalized gradient approximation(GGA)to calculate the lattice constant of both spinels comparable to experimental data.In addition,Born stability criteria and negative formation energy show that our studied spinels are also structurally and dynamically stable in the cubic phase.For ferromagnetic(FM)state stability,we also calculated the energy differences among FM,antiferromagnetic(AFM),and non-magnetic(NM)states.Additionally,Curie temperatures of ferromagnetic phases were also estimated.We used Trans-Blaha improved BeckeJohnson(TB-mBJ)potential functional for electronics as well as magnetic characteristics,which lead to the consistent explanation of half-metallic ferromagnetism,representing the whole band-occupancy in material with exact detail of density of states(DOS).The stable FM state was examined in spinels due to the exchange splitting of Ho cation consisting of p-d hybridizations compatible with the result achieved for electronics band structure and DOS.Further,spin magnetic moment was explained in terms of anion,cation,and sharing charge on studied spinels.In addition,the calculated thermoelectric properties clearly show that operation range of these systems may be utilized by future experimental works for identifying the potential applications of these systems.
文摘In the evaluation of a petroleum reserve,it is necessary to accurately determine certain petrophysical properties such as porosity and permeability of the reservoir rocks and rock mechanical properties.Petrophysical properties are key factors in the reservoir descniption and geomechanical properties are determining parameters in drilling operations and in stimulation and hydraulic fracturing jobs and also the development plans for given reservoir.It is more convenient to use homogenous rock samples with nearly constant initial permeability;however,obtaining such cores is very difficult.In this paper a simulated natural and homogeneous compacted sandstone rock with known physical and petrophysical propertie were used.Physical properties of reservoir rocks incude pore size distribution;grain size,cementing material concentration,and confining pressure affect rock porosity and pemmeability.Sound wave velocity was measured using an ultra sound tool on different sandstone core samples.Good cor-relations have been developed between sound wave velocity(Vp and Vs)the petrophysical properties mainly porosity and permeability.Significant correlations have been found between seismic wave ve-locity(Vp,Vs and VpVs)and mechanical parameters namely Young's modulus,shear modulus,bulk modulus and Poison's atio for sandstone core samples.This study has been carried out on dry core samples and core samples with different water saturations and results showed that there are changes in the correlation between seismic wave velocity and mechanical and ptrophysical properties as function of water saturation change from dry rock to water wet rock.
基金The authors acknowledge that this work was financially supported by the Beijing Natural Science Foundation Program(No.6194043)Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics(No.QETHSP2019007)China Agriculture Research System(CARS-43-01A).
文摘In order to explore the mechanical properties and breaking behavior of pellet feed during chewing,the experiments of texture mechanics,followed by the modeling and simulation of pellet feed based on the discrete element method were carried out in this research.Five wet basis moisture contents(8%,10%,12%,14%and 16%,respectively),two kinds of loading directions(L and D direction,respectively)of pig pellet feed were selected as variables.First,mechanical parameters including hardness,elasticity,tackiness and chewiness were measured by a texture analyzer.The results of compression tests showed that the hardness of pig pellet feed was 5.44-32.43 N,the elastic index was 0.04-0.94 mm,the tackiness was 0.07-6.63 N,the chewiness was 5.52-27.39 mJ.Moreover,the hardness,tackiness and chewiness of pig pellet feed decreased significantly with the increase of moisture content but the elasticity showed an adverse varying trend.The hardness,elasticity,tackiness and chewiness along D direction outweighed that of L direction in numerical data at the same moisture content.Then,the chewing and breaking processes of pellet feed were simulated based on the discrete element method(DEM)combined with bonding particle model,in which the whole pellet feed were considered as agglomerations of micro-particles and broke when the stress between micro-particles had exceeded the maximum limit.Multi-parameter optimization experiments were carried out using quadratic orthogonal rotation design,in which stiffness coefficient(X_(1)),critical stress(X2)and bonding radius(X_(3))were the influencing factors,hardness(Y_(1)),elasticity(Y_(2)),tackiness(Y_(3))and chewiness(Y_(4))were evaluating indicators.Based on the regression analysis of the Design-Expert 8.0.6 software and response surface analysis method,the relationship between the three influencing factors and evaluating indicators was established.The similarity between experimental and simulated results in feed morphology and mechanical index proved that the modeling method for pellet feed based on DEM was effective and accurate.This work can provide a reference for the feed forming process and the optimization design of the related feed machinery.Meanwhile,the DEM model provided a new method for evaluating the texture and palatability of pellet feed.
基金co-financed by the Interreg Atlantic Area Program through the European Regional Development Fund and the PORTOS project.
文摘This paper proposes an advanced method for estimating numerous parameters in a wind-energy-conversion system with high precision,especially in a transient state,including the rotation speed and mechanical torque of the turbine as well as wind velocity.The suggested approach is designed into two parts.First,a fourth-order Luenberger observer is proposed to take into account the significant fluctuations of the mechanical torque that can be caused by wind gusts.This observer provides an accurate estimate of speed and mechanical torque in all weather conditions and especially when the wind is gusting.At the same time,the wind velocity is calculated using the Luenberger observer outputs and a model of the mechanical power generated by the turbine.Second,these estimated parameters are exploited as input in a maximum-power-point tracking(MPPT)algorithm using the tip-speed ratio(TSR)to improve the sensorless strategy control.Simulation results were performed using MATLAB®/Simulink®for both wind gust and real wind profiles.We have verified that for wind gusts with jumps ranging from 3 to 7 m/s,the new observer manages to better follow the rotation speed and the torque of the turbine compared to a usual observer.In addition,we demonstrated that by applying the proposed estimator in the improved TSR-MPPT strategy,it is possible to extract 3.3%more energy compared to traditional approaches.