A new tapered multimode interference （MMl）-based coherent lightwave combiner is reported. A comprehensive theoretical analysis of mode behaviors in the tapered MMI waveguide is presented, and the output characterist...A new tapered multimode interference （MMl）-based coherent lightwave combiner is reported. A comprehensive theoretical analysis of mode behaviors in the tapered MMI waveguide is presented, and the output characteristics of the tapered MMI combiners with various structures are demonstrated. The combiner is fabricated on a silicon-on-insulator （SO1） substrate. Due to its advantages of having no end-facet reflection,easy extension to a multi-port configuration, high tolerance for fabrication errors, and compact size, the tapered MMI is a good candidate for a coherent lightwave combiner to be used in large-scale photonic integrated circuits.展开更多
Two-mode converters at 1.3μm, aiming at applications in mode-division multiplexing in Ethernet systems, are proposed and experimentally demonstrated. Based on multimode interference couplers, the two-mode converters ...Two-mode converters at 1.3μm, aiming at applications in mode-division multiplexing in Ethernet systems, are proposed and experimentally demonstrated. Based on multimode interference couplers, the two-mode converters with 50% and 66% mode conversion efficiencies are designed and fabricated on InP substrates. AIode conver- sion from the fundamental mode （TEo） to the first order mode （TE1） is successfully demonstrated within the wavelength range of 1280-1320nm. The 1.3-μm mode converters should be important devices in mode-division multiplexing systems in Ethernet systems.展开更多
Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analyse...Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.展开更多
Reverse saturable absorption is essential for the realization of dissipative solitons.In this paper,we introduce reverse saturable absorption by using nonlinear multimode interference(NL-MMI),for the first time,to the...Reverse saturable absorption is essential for the realization of dissipative solitons.In this paper,we introduce reverse saturable absorption by using nonlinear multimode interference(NL-MMI),for the first time,to the best of our knowledge,and obtain a stable dissipative soliton operation.By adjusting the coupling efficiency from multimode fiber to single mode fiber,the absorption properties of NL-MMI can be switched between saturation and reverse saturation.The dissipative soliton can be obtained with pulse width of 975 fs in the experiment,the 3-dB bandwidth at 1555 nm is 16 nm,and the maximum output power is 11.48 m W.The nonlinear absorption optical modulation and high damage threshold characteristics of the NL-MMI based ultrafast optical switch provide a new idea for realizing dissipative solitons.展开更多
An explanation of optical unitary transformation is presented for general nonoverlapping-image multimode interference(MMI)couplers with any number of input and output ports.The light transformation in the MMI coupler ...An explanation of optical unitary transformation is presented for general nonoverlapping-image multimode interference(MMI)couplers with any number of input and output ports.The light transformation in the MMI coupler can be considered as an optical field matrix acting on an input light column vector.We investigate the general phase principle of output light image.The complete proof of nonoverlapping-image MMI coupler’s optical unitarity along with the phase analysis of matrix element is provided.Based on a two-dimensional finite-difference time-domain(2 D-FDTD)simulation,the unitary transformation is obtained for a 4×4 nonoverlapping-image MMI coupler within a deviation of 4×10-2 for orthogonal invariance and 8×10-2 for transvection invariance in the C-band spectral range.A compact 1×4 splitter based on cascaded MMI coupler is proposed,showing a phase deviation less than 5.4°while maintaining a low-loss performance in C-band spectra.展开更多
The temperature dependence of characteristics for multimode interference(MMI) based 3-dB coupler in silicon-on-insulator is analyzed, which originates from the relatively high thermo-optic coefficient of silicon. For ...The temperature dependence of characteristics for multimode interference(MMI) based 3-dB coupler in silicon-on-insulator is analyzed, which originates from the relatively high thermo-optic coefficient of silicon. For restricted interference 3-dB MMI coupler, the output power uniformity is ideally 0 at room temperature and becomes 0.32 dB when temperature rises up to 550 K.For symmetric interference 3-dB MMI coupler, the power uniformity keeps ideally 0 due to its intrinsic symmetric interference mechanism. With the temperature rising, the excess loss of the both devices increases. The performance deterioration due to temperature variety is more obvious to restricted interference MMI 3-dB coupler, comparing with that of symmetric interference MMI 3-dB coupler.展开更多
Optical switches are key components for constructing optical communication networks, so it is necessary to design optical switches and optical switch arrays with high performance and low cost. As one type of optical s...Optical switches are key components for constructing optical communication networks, so it is necessary to design optical switches and optical switch arrays with high performance and low cost. As one type of optical switches, the multimode interference（MMl） switches have received considerable attention due to their unique merits. The structures and operation principles of various types of MMI switches are introduced, and the recent progresses of MMI switches are also discussed.展开更多
<div style="text-align:justify;"> We present a mode converter and demultiplexer structure for wavelength division multiplexing (WDM) transmission by employing multimode interference (MMI) on Silicon-on...<div style="text-align:justify;"> We present a mode converter and demultiplexer structure for wavelength division multiplexing (WDM) transmission by employing multimode interference (MMI) on Silicon-on-Insulator (SOI) platform. The mode converter and demultiplexer have a compact size of less than 2.7 μm × 43.7 μm. Moreover, the crosstalk between neighboring wavelength channel within C band (1530 nm to 1570 nm) can be reduced by utilizing the tapered phase shifter cascaded with MMI. The simulated results indicate that this structure has a low insertion loss of less than 1 dB, a low crosstalk of better than ?15 dB and a relatively high fabrication tolerance of ~10 nm. Such structure may find many potential applications in silicon photonic integrated devices. </div>展开更多
A novel harmonic mode-locked fiber laser based on nonlinear multimode interference(NL-MMI) in a microfiber-assisted ultrafast optical switch is proposed in this Letter.The microfiber-assisted ultrafast optical switch ...A novel harmonic mode-locked fiber laser based on nonlinear multimode interference(NL-MMI) in a microfiber-assisted ultrafast optical switch is proposed in this Letter.The microfiber-assisted ultrafast optical switch can be obtained by tapering the splicing point of the graded-index multimode fiber(GIMF) and single-mode fiber,which not only helps to shorten the self-imaging period in GIMF to relax the strict requirement of NL-MMI on the length of multimode fiber,but also improves the harmonic order.In the experiment,with the waist diameter of ~15 μm,the repetition rates of the fiber laser can be stably locked at 285 MHz,corresponding to the 16 th-order harmonic mode-locking,with the pulse duration of 1.52 ps.Our results provide novel insight into the design of a high-repetition-rate laser and the application of microfibers in the modelocking device.展开更多
A multimode interference refractive index （KI） sensor based on the coreless fiber was numerically and experimentally demonstrated. Two identical single mode fibers （SMF） are spliced at both ends of a section of th...A multimode interference refractive index （KI） sensor based on the coreless fiber was numerically and experimentally demonstrated. Two identical single mode fibers （SMF） are spliced at both ends of a section of the coreless fiber which can he considered as the equivalent weakly guiding multimode fiber （MMF） with a step-index profile when the surrounding refractive index （SKI） is lower than that of the coreless fiber. Thus, it becomes the conventional single-mode multimode single-mode （SMS） fiber structure but with a larger core size. The output spectra will shift along with the changes in the SKI owing to the direct exposure of the coreless fiber. The output spectra under different SKIs were numerically studied, as well as the sensitivities with different lengths and diameters of the coreless fiber. The predication and calculation showed the good agreement with the experimental results. The proposed RI sensor proved to be feasible by verification experiments, and the relative error was merely 0.1% which occupied preferable sensing performance and practicability.展开更多
A novel integrated dense wavelength division multiplexing interleaver scheme is presented based on phased-array (PHASAR) wavelength demultiplexer with multimode interference (MMI) couplers. MMI-PHASAR interleaver with...A novel integrated dense wavelength division multiplexing interleaver scheme is presented based on phased-array (PHASAR) wavelength demultiplexer with multimode interference (MMI) couplers. MMI-PHASAR interleaver with simple structure and compact si/e can reali/e narrow channel spacing through simple design procedure. And it is convenient for integration with integrated planar waveguide multiplexer/demultiplexers. A 25/50-GHz MMI-PHASAR interleaver is designed and the transmission characteristic is investigated by beasu propagation method.展开更多
In recent years, the silica-on-silicon based multimode interference （MMI） optical waveguide is an interesting research topic. It is being advanced various researches on the silica based MMI coupler. This paper repre...In recent years, the silica-on-silicon based multimode interference （MMI） optical waveguide is an interesting research topic. It is being advanced various researches on the silica based MMI coupler. This paper represents the considerations of the optimal design of the silica-on-silicon based MMI optical coupler for better performance. For that, we have illustrated the simulation results on a particular case of the 4x4 silica-on-silicon based MMI coupler. From the simulation results, it is seen that the performance of the MMI coupler depends on multiple width and length combinations of the MMI waveguide. The results also show that the width of the multimode waveguide could not be too small or too large for optimal performance, and at the widths, 100~tm, 120~tm and 130~tm, the performance could be optimized and be almost 0.62 - 0.64 in a given length range. Finally, the results have been compared with the optical coupler presently available in the market and show that the silica-on-silicon based MMI coupler is much more efficient in terms of losses and the performance associated with it and the size of the coupler.展开更多
We report, for the first time to our knowledge, an on-chip mode-locked laser diode(OCMLLD) that employs multimode interference reflectors to eliminate the need of facet mirrors to form the cavity. The result is an OCM...We report, for the first time to our knowledge, an on-chip mode-locked laser diode(OCMLLD) that employs multimode interference reflectors to eliminate the need of facet mirrors to form the cavity. The result is an OCMLLD that does not require cleaved facets to operate, enabling us to locate this OCMLLD at any location within the photonic chip. This OCMLLD provides a simple source of optical pulses that can be inserted within a photonic integrated circuit chip for subsequent photonic signal processing operations within the chip(modulation, optical filtering, pulse rate multiplication, and so on). The device was designed using standardized building blocks of a generic active/passive In P technology platform, fabricated in a multi-project wafer run, and achieved mode-locking operation at its fundamental frequency, given the uncertainty at the design step of the optical length of these mirrors, critical to achieve colliding pulse mode-locked operation.展开更多
The principle of weak-confined Multimode Interference is studied, and then a 1×8 K+-Na+ ion-exchange multimode interference optical power splitter is designed and fabricated.
A 2 × 2 optical waveguide coupler at 850 nm based on the multimode interference （MMI） structure with the polysilsesquioxanes liquid series （PSQ-Ls） polymer material and the imprint technique is presented. The...A 2 × 2 optical waveguide coupler at 850 nm based on the multimode interference （MMI） structure with the polysilsesquioxanes liquid series （PSQ-Ls） polymer material and the imprint technique is presented. The influence of the structural parameters, such as the single mode condition, the waveguide spacing of input/output ports, and the width and length of the multimode waveguide, on the optical splitting performance including the excess loss and the uniformity is simulated by the beam propagation method. By inserting a taper section of isosceles trapezoid between the single mode and multimode waveguides, the optimized structural parameters for low excess loss and high uniformity are obtained with the excess loss of -0.040 dB and the uniformity of-0.007 dB. The effect of the structure deviations induced during the imprint process on the optical splitting performance at different residual layer thicknesses is also investigated. The analysis results provide useful instructions for the waveguide device fabrication.展开更多
Two types of 1×2 multi-mode interference （MMI） splitters with splitting ratios of 85：15 and 72：28 are designed. On the basis of a numerical simulation, an optimal length of the MMI section is obtained. Subseq...Two types of 1×2 multi-mode interference （MMI） splitters with splitting ratios of 85：15 and 72：28 are designed. On the basis of a numerical simulation, an optimal length of the MMI section is obtained. Subsequently, the devices are fabricated and tested. The footprints of the rectangular MMI regions are only 3×18.2 and 3×14.3 （#m）. The minimum excess losses are 1.4 and 1.1 dB. The results of the test on the splitting ratios are consistent with designed values. The devices can be applied in ultra-compact photonic integrated circuits to realize the ＂tap＂ function.展开更多
A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for...A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for use in fiber optics communication systems.The fabricated device exhibits low loss and good coupling uniformity.The excess loss is lower than 0 8dB,and the uniformity is 0 45dB at the wavelength of 1550nm.Moreover,the polarization dependent loss is lower than 0 7dB at 1550nm.The device size is only 2mm×10mm.展开更多
Steering light into logic patterns with two-dimensional cascaded multimode waveguide is demonstrated. By employing the imaging properties of 2D multimode interference （MMI） and partial phase modulation method, the d...Steering light into logic patterns with two-dimensional cascaded multimode waveguide is demonstrated. By employing the imaging properties of 2D multimode interference （MMI） and partial phase modulation method, the design ideas and the implementing methods of the 2^（2×2） bits type spatial logic steering are discussed; therefore the structure of logical pattern is proposed. Numerical simulation is carried out to verify the design in detail by using the beam propagation method. It is expected to realize logic coders by using the integrated optical methods and exploit their potential applications in the field of optical logic.展开更多
An ultracompact 3 dB coupler is designed and fabricated in silicon on insulator,based on 1×2 line tapered multimode interference (MMI) coupler.Comparing with the conventional straight MMI coupler,the device is...An ultracompact 3 dB coupler is designed and fabricated in silicon on insulator,based on 1×2 line tapered multimode interference (MMI) coupler.Comparing with the conventional straight MMI coupler,the device is ～40% shorter in length.The device exhibits uniformity of 1 3dB and excess loss of 2 5dB.展开更多
SOI waveguides fabricated by wet-etching method are demonstrated.The single mode waveguide and 1×2 3dB MMI splitter are analyzed and designed by three dimensional beam propagation method to correct the error of e...SOI waveguides fabricated by wet-etching method are demonstrated.The single mode waveguide and 1×2 3dB MMI splitter are analyzed and designed by three dimensional beam propagation method to correct the error of effective index method and guided mode method.The devices are fabricated.Excellent performances,such as low propagation loss of -1.37dB/cm,low excess loss of -2.2dB,and good uniformity of 0.3dB,are achieved.展开更多
文摘A new tapered multimode interference （MMl）-based coherent lightwave combiner is reported. A comprehensive theoretical analysis of mode behaviors in the tapered MMI waveguide is presented, and the output characteristics of the tapered MMI combiners with various structures are demonstrated. The combiner is fabricated on a silicon-on-insulator （SO1） substrate. Due to its advantages of having no end-facet reflection,easy extension to a multi-port configuration, high tolerance for fabrication errors, and compact size, the tapered MMI is a good candidate for a coherent lightwave combiner to be used in large-scale photonic integrated circuits.
基金Supported by the National Basic Research Program of China under Grant No 2014CB340102the National Natural Science Foundation of China under Grant Nos 61474111 and 61274046
文摘Two-mode converters at 1.3μm, aiming at applications in mode-division multiplexing in Ethernet systems, are proposed and experimentally demonstrated. Based on multimode interference couplers, the two-mode converters with 50% and 66% mode conversion efficiencies are designed and fabricated on InP substrates. AIode conver- sion from the fundamental mode （TEo） to the first order mode （TE1） is successfully demonstrated within the wavelength range of 1280-1320nm. The 1.3-μm mode converters should be important devices in mode-division multiplexing systems in Ethernet systems.
文摘Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.
文摘Reverse saturable absorption is essential for the realization of dissipative solitons.In this paper,we introduce reverse saturable absorption by using nonlinear multimode interference(NL-MMI),for the first time,to the best of our knowledge,and obtain a stable dissipative soliton operation.By adjusting the coupling efficiency from multimode fiber to single mode fiber,the absorption properties of NL-MMI can be switched between saturation and reverse saturation.The dissipative soliton can be obtained with pulse width of 975 fs in the experiment,the 3-dB bandwidth at 1555 nm is 16 nm,and the maximum output power is 11.48 m W.The nonlinear absorption optical modulation and high damage threshold characteristics of the NL-MMI based ultrafast optical switch provide a new idea for realizing dissipative solitons.
基金Project supported by the National Key Research and Development Program of China(Grant No.2018YFB2200202)the National Natural Science Foundation of China(Grant No.61804148)
文摘An explanation of optical unitary transformation is presented for general nonoverlapping-image multimode interference(MMI)couplers with any number of input and output ports.The light transformation in the MMI coupler can be considered as an optical field matrix acting on an input light column vector.We investigate the general phase principle of output light image.The complete proof of nonoverlapping-image MMI coupler’s optical unitarity along with the phase analysis of matrix element is provided.Based on a two-dimensional finite-difference time-domain(2 D-FDTD)simulation,the unitary transformation is obtained for a 4×4 nonoverlapping-image MMI coupler within a deviation of 4×10-2 for orthogonal invariance and 8×10-2 for transvection invariance in the C-band spectral range.A compact 1×4 splitter based on cascaded MMI coupler is proposed,showing a phase deviation less than 5.4°while maintaining a low-loss performance in C-band spectra.
文摘The temperature dependence of characteristics for multimode interference(MMI) based 3-dB coupler in silicon-on-insulator is analyzed, which originates from the relatively high thermo-optic coefficient of silicon. For restricted interference 3-dB MMI coupler, the output power uniformity is ideally 0 at room temperature and becomes 0.32 dB when temperature rises up to 550 K.For symmetric interference 3-dB MMI coupler, the power uniformity keeps ideally 0 due to its intrinsic symmetric interference mechanism. With the temperature rising, the excess loss of the both devices increases. The performance deterioration due to temperature variety is more obvious to restricted interference MMI 3-dB coupler, comparing with that of symmetric interference MMI 3-dB coupler.
文摘Optical switches are key components for constructing optical communication networks, so it is necessary to design optical switches and optical switch arrays with high performance and low cost. As one type of optical switches, the multimode interference（MMl） switches have received considerable attention due to their unique merits. The structures and operation principles of various types of MMI switches are introduced, and the recent progresses of MMI switches are also discussed.
文摘<div style="text-align:justify;"> We present a mode converter and demultiplexer structure for wavelength division multiplexing (WDM) transmission by employing multimode interference (MMI) on Silicon-on-Insulator (SOI) platform. The mode converter and demultiplexer have a compact size of less than 2.7 μm × 43.7 μm. Moreover, the crosstalk between neighboring wavelength channel within C band (1530 nm to 1570 nm) can be reduced by utilizing the tapered phase shifter cascaded with MMI. The simulated results indicate that this structure has a low insertion loss of less than 1 dB, a low crosstalk of better than ?15 dB and a relatively high fabrication tolerance of ~10 nm. Such structure may find many potential applications in silicon photonic integrated devices. </div>
基金supported by the National Natural Science Foundation of China (NSFC) (Nos. 61805023, 61804013, and 61804014)
文摘A novel harmonic mode-locked fiber laser based on nonlinear multimode interference(NL-MMI) in a microfiber-assisted ultrafast optical switch is proposed in this Letter.The microfiber-assisted ultrafast optical switch can be obtained by tapering the splicing point of the graded-index multimode fiber(GIMF) and single-mode fiber,which not only helps to shorten the self-imaging period in GIMF to relax the strict requirement of NL-MMI on the length of multimode fiber,but also improves the harmonic order.In the experiment,with the waist diameter of ~15 μm,the repetition rates of the fiber laser can be stably locked at 285 MHz,corresponding to the 16 th-order harmonic mode-locking,with the pulse duration of 1.52 ps.Our results provide novel insight into the design of a high-repetition-rate laser and the application of microfibers in the modelocking device.
文摘A multimode interference refractive index （KI） sensor based on the coreless fiber was numerically and experimentally demonstrated. Two identical single mode fibers （SMF） are spliced at both ends of a section of the coreless fiber which can he considered as the equivalent weakly guiding multimode fiber （MMF） with a step-index profile when the surrounding refractive index （SKI） is lower than that of the coreless fiber. Thus, it becomes the conventional single-mode multimode single-mode （SMS） fiber structure but with a larger core size. The output spectra will shift along with the changes in the SKI owing to the direct exposure of the coreless fiber. The output spectra under different SKIs were numerically studied, as well as the sensitivities with different lengths and diameters of the coreless fiber. The predication and calculation showed the good agreement with the experimental results. The proposed RI sensor proved to be feasible by verification experiments, and the relative error was merely 0.1% which occupied preferable sensing performance and practicability.
基金This work was supported by the National Natural Science Foundation of China (No. 69990540).
文摘A novel integrated dense wavelength division multiplexing interleaver scheme is presented based on phased-array (PHASAR) wavelength demultiplexer with multimode interference (MMI) couplers. MMI-PHASAR interleaver with simple structure and compact si/e can reali/e narrow channel spacing through simple design procedure. And it is convenient for integration with integrated planar waveguide multiplexer/demultiplexers. A 25/50-GHz MMI-PHASAR interleaver is designed and the transmission characteristic is investigated by beasu propagation method.
文摘In recent years, the silica-on-silicon based multimode interference （MMI） optical waveguide is an interesting research topic. It is being advanced various researches on the silica based MMI coupler. This paper represents the considerations of the optimal design of the silica-on-silicon based MMI optical coupler for better performance. For that, we have illustrated the simulation results on a particular case of the 4x4 silica-on-silicon based MMI coupler. From the simulation results, it is seen that the performance of the MMI coupler depends on multiple width and length combinations of the MMI waveguide. The results also show that the width of the multimode waveguide could not be too small or too large for optimal performance, and at the widths, 100~tm, 120~tm and 130~tm, the performance could be optimized and be almost 0.62 - 0.64 in a given length range. Finally, the results have been compared with the optical coupler presently available in the market and show that the silica-on-silicon based MMI coupler is much more efficient in terms of losses and the performance associated with it and the size of the coupler.
基金support from the Spanish Ministerio de Economia y Competitividad Di DACTIC project (TEC201347753-C3-3-R)financial support from SENESCYT (National Secretary of Science, Technology, and Innovation, Quito, Ecuador) for the Ph.D. stage at Universidad Carlos Ⅲ de Madrid
文摘We report, for the first time to our knowledge, an on-chip mode-locked laser diode(OCMLLD) that employs multimode interference reflectors to eliminate the need of facet mirrors to form the cavity. The result is an OCMLLD that does not require cleaved facets to operate, enabling us to locate this OCMLLD at any location within the photonic chip. This OCMLLD provides a simple source of optical pulses that can be inserted within a photonic integrated circuit chip for subsequent photonic signal processing operations within the chip(modulation, optical filtering, pulse rate multiplication, and so on). The device was designed using standardized building blocks of a generic active/passive In P technology platform, fabricated in a multi-project wafer run, and achieved mode-locking operation at its fundamental frequency, given the uncertainty at the design step of the optical length of these mirrors, critical to achieve colliding pulse mode-locked operation.
基金This work is supported by the National Natural Science Foundation of Zhejiang providence, CHINA, No. 601130.
文摘The principle of weak-confined Multimode Interference is studied, and then a 1×8 K+-Na+ ion-exchange multimode interference optical power splitter is designed and fabricated.
基金This work was supported in part by the International Science ＆ Technology Cooperation Program of China （No. 2014DFG32590）, National Natural Science Foundation of China （No.61077015, 61307040）, National R＆D Program （No.2012AA040406）, Natural Science Foundation of Liaoning Province （No. 2014020002）, Opening Project of Shanghai Key Laboratory of All Solid-state Laser and Applied Techniques （No. 2013ADL04）, and Fundamental Research Funds for the Central Universities （DUT 13JB01, DUT 15ZD231, and DUT2015TD47）.
文摘A 2 × 2 optical waveguide coupler at 850 nm based on the multimode interference （MMI） structure with the polysilsesquioxanes liquid series （PSQ-Ls） polymer material and the imprint technique is presented. The influence of the structural parameters, such as the single mode condition, the waveguide spacing of input/output ports, and the width and length of the multimode waveguide, on the optical splitting performance including the excess loss and the uniformity is simulated by the beam propagation method. By inserting a taper section of isosceles trapezoid between the single mode and multimode waveguides, the optimized structural parameters for low excess loss and high uniformity are obtained with the excess loss of -0.040 dB and the uniformity of-0.007 dB. The effect of the structure deviations induced during the imprint process on the optical splitting performance at different residual layer thicknesses is also investigated. The analysis results provide useful instructions for the waveguide device fabrication.
基金supported in part by the National Natural Science Foundation of China (No. 60977050)the National "973" Program of China (Nos. 2009CB320302 and 2011CB301704)
文摘Two types of 1×2 multi-mode interference （MMI） splitters with splitting ratios of 85：15 and 72：28 are designed. On the basis of a numerical simulation, an optimal length of the MMI section is obtained. Subsequently, the devices are fabricated and tested. The footprints of the rectangular MMI regions are only 3×18.2 and 3×14.3 （#m）. The minimum excess losses are 1.4 and 1.1 dB. The results of the test on the splitting ratios are consistent with designed values. The devices can be applied in ultra-compact photonic integrated circuits to realize the ＂tap＂ function.
文摘A 1×8 multimode interference power splitter with multimode input/output waveguides in SOI material is designed by the beam propagation method and fabricated by the inductive coupled plasma etching technology for use in fiber optics communication systems.The fabricated device exhibits low loss and good coupling uniformity.The excess loss is lower than 0 8dB,and the uniformity is 0 45dB at the wavelength of 1550nm.Moreover,the polarization dependent loss is lower than 0 7dB at 1550nm.The device size is only 2mm×10mm.
基金Project supported by the National Natural Science Foundation of China （Grant No 60477018） and the Major Program of the National Natural Science Foundation of China （Grant No 60436020）.
文摘Steering light into logic patterns with two-dimensional cascaded multimode waveguide is demonstrated. By employing the imaging properties of 2D multimode interference （MMI） and partial phase modulation method, the design ideas and the implementing methods of the 2^（2×2） bits type spatial logic steering are discussed; therefore the structure of logical pattern is proposed. Numerical simulation is carried out to verify the design in detail by using the beam propagation method. It is expected to realize logic coders by using the integrated optical methods and exploit their potential applications in the field of optical logic.
文摘An ultracompact 3 dB coupler is designed and fabricated in silicon on insulator,based on 1×2 line tapered multimode interference (MMI) coupler.Comparing with the conventional straight MMI coupler,the device is ～40% shorter in length.The device exhibits uniformity of 1 3dB and excess loss of 2 5dB.
文摘SOI waveguides fabricated by wet-etching method are demonstrated.The single mode waveguide and 1×2 3dB MMI splitter are analyzed and designed by three dimensional beam propagation method to correct the error of effective index method and guided mode method.The devices are fabricated.Excellent performances,such as low propagation loss of -1.37dB/cm,low excess loss of -2.2dB,and good uniformity of 0.3dB,are achieved.
