For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology ...For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology to study the effect of the matrix proportion on the mechanical properties and rupture behaviors of rock.Samples of mylonitic granite and granitic protomylonite with varying matrix proportions were obtained from a ductile shear zone for a series of uniaxial compression and acoustic emission(AE)tests.The results showed that with the increase in matrix proportion,the average strength and elastic modulus of the samples increased,and the rock sample with the largest matrix proportion exhibited the maximum peak stress of 244.42 MPa,which was 45.86%greater than the average peak stress of the rock samples with the smallest matrix proportions.For the rock samples with larger matrix proportion,their mechanical parameters exhibited greater dispersion and the large-scale appearance of AE events occurred earlier,showing a relatively gradual failure process.These samples had larger accumulated AE parameter values and greater degree of failure.In contrast,for samples with smaller matrix proportions,the large-scale appearance of AE events occurred close to the peak stress,indicating that the occurrence of damage and fractures was centralized and instantaneous.These samples had lower accumulated AE parameter values and fewer cracks after failure.Additionally,for the rock samples with more matrix proportion,the average variance of the b-value was 1.1,which was lower than that of rock samples with the smallest matrix proportion(the average variance of the b-value was 3.7).Furthermore,it can be predicted that under certain stress,the failure depth around a tunnel is generally smaller when the strength of rock samples with larger matrix proportion is greater.展开更多
Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A s...Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi (Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015).展开更多
Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the...Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.展开更多
On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collec...On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.展开更多
The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric di...The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10-7.87s-1 and 10-11.49s-1 with differential stresses of 32.63-63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing’an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean.展开更多
Abu Rusheid area lie in the south of the Eastern Desert of Egypt and comprises(1)ophiolitic mélange,consisting of ultramafic rocks and layered metagabbros in metasedimentary matrix(2)cataclastic group,consisting ...Abu Rusheid area lie in the south of the Eastern Desert of Egypt and comprises(1)ophiolitic mélange,consisting of ultramafic rocks and layered metagabbros in metasedimentary matrix(2)cataclastic group,consisting of protomylonites,mylonites,ultramylonites and silicified ultramylonites(3)monzogranites(4)pegmatite pockets,quartz veins and postgranite dykes.Focus on the monzogranites and the xenoliths of mylonite rocks from the geochemical and mineralogical points of view introduces a new view about the genesis of the related mineralization.Geochemically,the monzogranites have a metaluminous character and were crystallized under moderate water-vapor pressure around 3 kb and temperatures of 750–800°C.The monzogranites are altered along strike-slip faults exhibiting propylitic,with slightly sodic metasomatism and record high radioactive measurements.The average uranium and thorium(U and Th)contents in fresh monzogranites,mylonite xenolith and altered monzogranites are(7.3,21.20),(40.36,94.82),(60.34 and 347.88 ppm),respectively.These high radioactivities are attributed to the presence of kasolite,uranothorite,cerite,fluorite,zircon,apatite and columbite.The mylonite xenolith is higher in radioactivity than the surrounding fresh monzogranites,reflecting U and Th enrichment before emplacement of the monzogranites,then the latter were subjected to right lateral strike-slip faulting with producing hydrothermal solution rich in Th and U.展开更多
Structural analyses in the northern part of the North Patagonia Massif, in the foliated Caita Co granite and in La Sefia and Pangare mylonites, indicate that the pluton was intruded as a sheet-like body into an openin...Structural analyses in the northern part of the North Patagonia Massif, in the foliated Caita Co granite and in La Sefia and Pangare mylonites, indicate that the pluton was intruded as a sheet-like body into an opening pull-apart structure during the Gondwana Orogeny. Geochronological studies in the massif indicate a first, lower to middle Permian stage of regional deformation, related to movements during indentation tectonics, with emplacement of foliated granites in the western and central areas of the North Patagonian Massif. Between the upper Permian and lower Triassic, evidence indicates emplacement of undeformed granitic bodies in the central part of the North Patagonian Massif. A second pulse of deformation between the middle and upper Triassic is related to the emplacement of the Caita CO granite, the development of mylonitic belts, and the opening of the Los Menucos Basin. During this pulse of deformation, compression direction was from the eastern quadrant.展开更多
The Ailaoshan-Red River(ASRR) shear zone in SW China represents an important discontinuity believed to have accommodated eastward extrusion of the Tibetan Plateau in response to the collision of the Indian and Euras...The Ailaoshan-Red River(ASRR) shear zone in SW China represents an important discontinuity believed to have accommodated eastward extrusion of the Tibetan Plateau in response to the collision of the Indian and Eurasian plates. The onset timing and duration of the ASRR sinistral strike-slip shearing have been hotly disputed. In this paper we present new zircon LA-ICP-MS U-Pb geochronological data from six syntectonic granitic mylonite and leucosomes samples from the ASRR shear zone. Our data reveal a metamorphic age of ~40 Ma, most likely suggesting the maximum age of the shearing initiation. Rocks showing syn-kinematic signatures yield crystallization ages of 38–22 Ma, with inherited components ranging from 716 to 108 Ma. These results, together with existing geological and geochronological data, indicate that the sinistral shearing along the ASRR zone probably began at 40 Ma, mainly activated at 29–22 Ma and lasted at least to ~22 Ma. Our data suggest a continuous extrusion between the Indochina and South China blocks during ~35–17 Ma. The ASRR sinistral shearing has accommodated large scale eastward displacement of the southeastern Tibetan syntaxis, and is likely responsible for the opening of the South China Sea.展开更多
A dating of two biotite samples taken from the meso- and low-temperature myloniteswithin the Shangyi-Chicheng fault belt on the north of the North China Craton yields 40Ar/39Ar iso-topic ages of (399 1) Ma and (263 2)...A dating of two biotite samples taken from the meso- and low-temperature myloniteswithin the Shangyi-Chicheng fault belt on the north of the North China Craton yields 40Ar/39Ar iso-topic ages of (399 1) Ma and (263 2) Ma, respectively. These data reflect an Early Devonian deformation and a Late Carboniferous retrograde metamorphism event along the fault, suggesting that the tectonic activities of the North China Craton in Paleozoic should be reconsidered.展开更多
Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especi...Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif,especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that:(1) Diancangshan deep metamorphic rock has experienced early high-temperature leftlateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing;(2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and(3) the fluid is quite active during the syn-tectonic shearing overprinted lowtemperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif.展开更多
The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in so...The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle-ductile to brittle high-angle normal faults)in the footwall.展开更多
A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and ...A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.展开更多
The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion o...The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan(DCS) high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River(ASRR) shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.展开更多
The Yunmeng Shan metamorphic core complex (MCC) is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone (mylonite zone), chloritized microbreccia...The Yunmeng Shan metamorphic core complex (MCC) is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone (mylonite zone), chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks (Es=0.66-0.72) to protomylonites (Es=0.66-0.83), and to mylonites (Es=0.71-1.2). The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite (0.47〈Wk〈0.85) record a bulk simple-dominated general shearing at the initial evolution stage of the Yunmeng Shan MCC's detachment zone; and the extensional crenulation cleavage(ecc) (0.34〈Wk〈0.77) recorded a bulk pure-dominated general shearing at the later stage of the evolution. Kinematic vorticity measurements also show that the Yunmeng Shan MCC detachment zone is a result of a combination of simple-dominated general shearing caused by crustal extension at the early stage and pure-dominated general shearing caused by MCC uplifting at the late stage. The ductile thinning estimated by finite strain measurements and estimation of Kinematic vorticity ranges from 52% to 82%, which is the minimum thining estimation. Our studies provide new evidence for mechanisms of the Yunmeng Shan MCC detachement zone.展开更多
A 100~500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints...A 100~500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints of the rocks strike in NE70 and dip steeply (nearly vertical), coincident with the striking of Altyn Tagh fault zone, and their stretched lineations are nearly horizontal. Shear strains are well developed and show sinistral sheared. The amphibolitic and granitic mylonites are most probably the products of deep\|seated melting caused by sinistral strike\|slip shearing as suggested by the evidence below: (1) The migmatization is intensely developed and spatially controlled by the shear zone, and the rock has a set of NNE perspective foliation which is in accord with the direction of the Altyn Tagh strike\|slip fault zone. (2) The recrystallized hornblende aggregate is distributed in band with obvious nebulous texture, indicating the characteristics of anatexis, and the hornblendes are oriented and form the nearly horizontal stretching lineation; some hornblendes have titanite inclusions, and magmatic long\|columnar zircons are in directional arrangement.(3) The banded felsic material is developed, and the plagioclase is characteristic of high\|temperature plastic deformation and shows sinistral shear stain. (4) In mylonites, all the axis C fabric of quartz shows the feature of sinistral shearing and the majority is generally middle to low temperature fabric, but there also exists high temperature fabric, which suggests that high temperature shearing occur in the early stage of strike\|slip deformation and it is characterized by middle to low temperature shearing at the beginning of anatexis or in the late stage of the deformation. (5) On the XZ plane of mylonite and mylonitized rocks, there exists the consistent sinistral shear stain, which suggests the products of the same strike\|slip shearing.Zircons were separated from three samples of mylonitized granitic rocks for age dating. Two groups of zircon were distinguished in morphology: one is elongate prismatic grains, and the other shows slight rounding. Some zoned structure of selected grains were examined by cathodoluminescence. Dating was completed in the SHRIMP laboratory of Stanford University. Fifteen analyses were made on 14 zircon grains. Sample S99\|25 show two obvious two age groups, one is 527~549Ma, and the other is 466~472Ma. Sample S99\|9 contains two age groups either, one is 475~507Ma and the other is 279Ma. Sample S99\|6 shows three groups: ① 528Ma; ② 365Ma and③ 238~243Ma, here the 365Ma is explained as mixture age between the other two age groups according to its exact location in the grain. In summary, from the three samples we found at least three age groups: 507~548Ma; 466~472Ma; 238~243Ma.The ages of 507Ma to 548Ma and 466Ma to 472Ma represent the deformation and metamorphism of Early Paleozoic age, which is most likely correspond to the close of the Qilian Sea and continental subduction and collision reported in recent papers (Yang Jingsui et al., 1998; Zhang Jianxin et al., 1999; Xu Zhiqin et al., 1999). The 238~243Ma most likely represent the formational age of the Altyn Tagh strike\|slip fault, which is consistent with the formational age (200~240Ma) of the large\|scale sinistral strike\|slip fault zone of the South Margin of East Kunlun (Li Haibing et al., 1996), and both can be attributed to the oblique subduction and collision of the Bayan Har terrane with the East Kunlun terrane during Indosinian period.展开更多
Shibaqinghao gold deposit is situated in the western part of the northern margin of the North China Craton. It is controlled by an E-W trending tectonic zone that is located in the middle unit of Dongwufenzi group whi...Shibaqinghao gold deposit is situated in the western part of the northern margin of the North China Craton. It is controlled by an E-W trending tectonic zone that is located in the middle unit of Dongwufenzi group which consists of a se- quence of greenschist-facies metamorphic rocks in an Archean greenstone belt. In Shibaqinghao gold deposit there are two types of gold ore, a mylonite ore and a quartz vein ore. Mylonite ore bodies were formed during ductile shearing stage in the Early Proterozoic, whereas quartz vein ore bedies might have been fOrmed in the Mesozoic time. Pyrite accompanied with native gold in the mylonite ore has sulpfur of which ■S values range from-5. 8 to + 0. 8 per mil,similar to the values of mantle-derived sulphur. These data suggest that gold in the mylonite ore be derived from the country rocks which originated directly in the upper mantle. Pyrite in quartz vein ore has the of ■S values between + 3. 0 and + 11. 0 per mil, similar to the values of some granitic rocks. These facts indicate that the gold in the quartz vein ore is related to some granitic magma generated in the crust. This study revealed that two different mineralization occurred at different geological times and in different environments but in the same place, resuling in the Shibaqinghao gold deposit.展开更多
Structural, microstructural analysis is done on the Altun fault zo ne and fault rocks. The major characteristics of faulting are summarized. Micros tructural observation reveals a complicated evolution of the fault zo...Structural, microstructural analysis is done on the Altun fault zo ne and fault rocks. The major characteristics of faulting are summarized. Micros tructural observation reveals a complicated evolution of the fault zone. Much at tention is paid to the microstructural observation and dynamic analysis of fault ing. The occurrence of phengite grains suggest abnormally high pressure conditio ns during ductile deformation and metamorphism, while the occurrence of muscovit e-chlorite mineral assemblage suggest a low temperature and low pressure condit i on. Micro-component analysis on the inter-grown muscovite and chlorite grains gives similar information. It is concluded that the first deformation along the Altun fault zone is a type of ductile shearing, forming mylonites and mylonitic rocks along the fault zone. A post-Jurassic deformation is primarily suggested by the involvement of the l atest tectonic units (Jurassic) in the ductile deformation.The early tectonic ev ent involves deformation and metamorphism under conditions in the upper crust, w ith T-P conditions varying to a large extent (T-270℃ ~350℃; P-0.005GPa~0. 43GPa), which may be attributed to the extra tectonic stresses.展开更多
Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain...Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain unanswered. Here we reported, for the first time, frictional melting-induced pseudotachylytes in the intensively deformed felsic rocks along the ITS zone in southern Tibet. This study reveals that pseudotachylytes induced profound weakness of the boundary fault between Indian and Asian plates. The intrinsically low strength of the foliated microlites crystallized from frictional melt or glass(i.e., pseudotachylyte) at seismogenic depths compared with the surrounding coarse-grained quartzofeldspathic rocks in the brittle and semi-brittle regime is sufficient to explain the localization of shear strain, the development of ductile shear zones embedded in strong wall rocks, and the transition from the strong to weak fault behaviors without invoking the presence of high fluid pressure or low friction coefficient metasomatic materials(e.g., smectite or lizardite) within the faults.展开更多
There are two types of gold ore in Shibaqinghao gold deposit, a mylonite ore and a quartz - vein ore. Pb isotope compositions for mylonite ore are characterized by lower Pb isotope ratios ranging from 16.63 to 17.45 (...There are two types of gold ore in Shibaqinghao gold deposit, a mylonite ore and a quartz - vein ore. Pb isotope compositions for mylonite ore are characterized by lower Pb isotope ratios ranging from 16.63 to 17.45 (206Pb/204Pb), 15.31 to15.48 (207Pb/204pb), 36.52 to 38.85 (208Pb/204Pb). They are scattered very close to a model curve of the mantle evolution. These ratios suggest that gold in the mylonite ore might be derived from the country rocks, which originated directly in the upper mantle. Pb isotope compositions for quartz - vein ore are characterized by higher Pb isotope ratios ranging from 18.23 to 19.74 (206Pb/204Pb), 15.69 to 15.89 (207Pb/204Pb), 38.64 to 40. 13 (208Pb/204Pb). They are scattered very close to a model curve of the upper crustal evolution. These facts indicate that the gold in the quartz - vein ore might be related to some granitic magma generated in the crust.展开更多
Recent geological study and survey on the scale of 1: 50000 in northern Guangxi have made some advancements: meta-basic-ultrabasic rocks which occured as bedding injection sheets in the Sanrnenjie formation of the Pro...Recent geological study and survey on the scale of 1: 50000 in northern Guangxi have made some advancements: meta-basic-ultrabasic rocks which occured as bedding injection sheets in the Sanrnenjie formation of the Proterozoic Danzhou group and caused contact metamorphism or hydrothermal alteration in adjacent wallrocks, were originated in extensional environment. Basic rocks belong to deep-sea tholeiite. TLe meta-basic -ultrabasic rocks sufferred intense deformation partitioning, resulting in lenticular network which was composed of mylonite zones in highly de formed field and lensoids in less- or non-deformed field. This structural pattern was explained as "melange" or "non-rooted cool intrusion " by previous workers. The deformation partitioning was mainly pure shearing in the early stage plus simple shearing in the later stage. This evolution was closely related to progressive deformation of the Guangxi orogeny.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52125402)the Natural Science Foundation of Sichuan Province,China(Grant No.2022NSFSC0005).
文摘For projects near the tectonic belt,mylonite of varying metamorphic degrees may be present.The matrix proportion of rock reflects its internal microscopic characteristics,thus it is beneficial for engineering geology to study the effect of the matrix proportion on the mechanical properties and rupture behaviors of rock.Samples of mylonitic granite and granitic protomylonite with varying matrix proportions were obtained from a ductile shear zone for a series of uniaxial compression and acoustic emission(AE)tests.The results showed that with the increase in matrix proportion,the average strength and elastic modulus of the samples increased,and the rock sample with the largest matrix proportion exhibited the maximum peak stress of 244.42 MPa,which was 45.86%greater than the average peak stress of the rock samples with the smallest matrix proportions.For the rock samples with larger matrix proportion,their mechanical parameters exhibited greater dispersion and the large-scale appearance of AE events occurred earlier,showing a relatively gradual failure process.These samples had larger accumulated AE parameter values and greater degree of failure.In contrast,for samples with smaller matrix proportions,the large-scale appearance of AE events occurred close to the peak stress,indicating that the occurrence of damage and fractures was centralized and instantaneous.These samples had lower accumulated AE parameter values and fewer cracks after failure.Additionally,for the rock samples with more matrix proportion,the average variance of the b-value was 1.1,which was lower than that of rock samples with the smallest matrix proportion(the average variance of the b-value was 3.7).Furthermore,it can be predicted that under certain stress,the failure depth around a tunnel is generally smaller when the strength of rock samples with larger matrix proportion is greater.
基金funded by the National Natural Science Foundation of China(grants No.41572191 and 41702211)the Natural Science Foundation of Guangxi(grant No.2017GXNSFBA198166)
文摘Objective The northern Guangxi region is in the southwestern part of the Southern China continent,which is located at the junction of the southwest section of the Early Paleozoic Yangtze block and Cathaysian block.A series of NNE-trending ductile shear zones are developed in this region,and these ductile shear zones are mostly previously suggested boundary faults of the Early Paleozoic Yangtze block and Cathaysian block,such as the Shoucheng–Piaoli ductile shear zone in Northern Guangxi (Meng Yuanku et al., 2016; Zhang Xuefeng et al., 2015).
基金This study was funded by the National Natural Science Foundation of China (grant numbers 40272094, 40672131) We gratefully acknowledge Mr. Luo Xiuquan and Zhang Youquan from the Petroleum Geology Research and Laboratory Center, Institute of Petroleum Exploration and Development, Beijing, for their work on the 40Ar/39Ar analysis.
文摘Bulk separates of porphyroclastic phengite, neoformed phengite and their mixtures from the Tan-Lu HP mylonites overprinted on the Sulu UHP rocks were analyzed with the 40Ar/39Ar step heating method. Two samples of the neoformed phengite from ultramylonite give 40Ar/39Ar plateau ages of 209.9±1.8 Ma and 214.3±1.8 Ma, which are interpreted as representing cooling times of the TanLu sinistral faulting, and provide geochronological evidence for the syn-orogenic faulting of the Tan-Lu fault zone. The results show that the phengite formed during the retrograde eclogite-facies mylonitization was not contaminated with excess argon and can be used for dating the deformation. Argon closure in previous K-bearing minerals with excess argon under a retrograde HP dry condition is considered to be the reason for lack of excess argon incorporation in the neoformed phengite. Five porphyroclastic phengite samples yield 40Ar/39Ar plateau ages ranging from 666±12 Ma to 307.1±3.3 Ma, which are interpreted as being contaminated with excess argon. Two mixture samples with plateau ages of 239.4±2.1 Ma and 239.3±2.0 Ma show upward-convex age spectra caused by the mixture of older porphyroclastic phengite with excess argon incorporation and younger neoformed phengite without excess argon incorporation. It is demonstrated that excess argon introduced from the previous UHP metamorphism is still preserved in the pre-existing phengite after the Tan-Lu eclogite-facies mylonitization. The intense deformation under HT and HP conditions cannot erase excess argon in the previous phengite totally due to restricted fluid activities. These porphyroclastic phengite previously contaminated with excess argon cannot be used for dating the later HP deformation. This indicates that deformation under a HP dry condition does not play an important role in removing previous 40Are in phengite.
基金This study was supported by the National Key Project "Study of the Natural Gas Fault System in the Tancheng-Lujiang Fault Belt (No. 95-101-01)" of the Ninth Five-Year Plan Period and the National Natural Science Foundation of China Grant 48970172.
文摘On the basis of field geology, three typical ductile shear zones in the southern part of the Tancheng-Lujiang fault belt have been chosen for a detailed study. Altogether ten samples of the tectonites have been collected for this study. The paper is focused on a comprehensive study of the tectonites in the medium-lower horizons of the ductile shear zones. The mineral compositions of the rocks are analyzed with EPMA and some typical whole-rock samples analyzed by chemical and ICP methods. Based on the comprehensive study of the characteristics of the deformation, the mineral assemblages and the changes of chemical composition of the bulk rocks, this paper presents a discussion on the relationship between the volume loss, the fluid flow and compositional changes during mylonitization of the ductile shear zones in this region. Our study shows that there are a large amount of fluids flowing through the shear zones during the process of mylonization, accompanied by the loss of rock volume and migration of elements and components. Modelling calculation results under different saturation conditions of fluids show that the maximum volume loss of the tectonites is about 60% relative to their protolith, while the fluid/rock ratio ranges from 10 to 103 in different ductile shear zones.
基金financially co-supported by the National Key R&D Program of China (Grant No.2017YFC0601401 and 2017YFC0601300-01)the National Natural Science Foundation of China (Grant no. 41602211 and 41230206)
文摘The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10-7.87s-1 and 10-11.49s-1 with differential stresses of 32.63-63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing’an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean.
文摘Abu Rusheid area lie in the south of the Eastern Desert of Egypt and comprises(1)ophiolitic mélange,consisting of ultramafic rocks and layered metagabbros in metasedimentary matrix(2)cataclastic group,consisting of protomylonites,mylonites,ultramylonites and silicified ultramylonites(3)monzogranites(4)pegmatite pockets,quartz veins and postgranite dykes.Focus on the monzogranites and the xenoliths of mylonite rocks from the geochemical and mineralogical points of view introduces a new view about the genesis of the related mineralization.Geochemically,the monzogranites have a metaluminous character and were crystallized under moderate water-vapor pressure around 3 kb and temperatures of 750–800°C.The monzogranites are altered along strike-slip faults exhibiting propylitic,with slightly sodic metasomatism and record high radioactive measurements.The average uranium and thorium(U and Th)contents in fresh monzogranites,mylonite xenolith and altered monzogranites are(7.3,21.20),(40.36,94.82),(60.34 and 347.88 ppm),respectively.These high radioactivities are attributed to the presence of kasolite,uranothorite,cerite,fluorite,zircon,apatite and columbite.The mylonite xenolith is higher in radioactivity than the surrounding fresh monzogranites,reflecting U and Th enrichment before emplacement of the monzogranites,then the latter were subjected to right lateral strike-slip faulting with producing hydrothermal solution rich in Th and U.
基金part of the research project"Configuración Geológica y Geodinámica del sector central de la Comarca Nordpatagónica,Argentina"(24/H100)granted by the Universidad Nacional del Sur"La Orogenia Gondwánica en el sector central de la Comarca Nordpatagónica"(11420090100108)granted by CONICET
文摘Structural analyses in the northern part of the North Patagonia Massif, in the foliated Caita Co granite and in La Sefia and Pangare mylonites, indicate that the pluton was intruded as a sheet-like body into an opening pull-apart structure during the Gondwana Orogeny. Geochronological studies in the massif indicate a first, lower to middle Permian stage of regional deformation, related to movements during indentation tectonics, with emplacement of foliated granites in the western and central areas of the North Patagonian Massif. Between the upper Permian and lower Triassic, evidence indicates emplacement of undeformed granitic bodies in the central part of the North Patagonian Massif. A second pulse of deformation between the middle and upper Triassic is related to the emplacement of the Caita CO granite, the development of mylonitic belts, and the opening of the Los Menucos Basin. During this pulse of deformation, compression direction was from the eastern quadrant.
基金Supported by the National Basic Research Program of China(No.2014CB440901)the China National Natural Science Foundation(No.41190073)the Fundamental Research Funds for the Central Universities to SYSU
文摘The Ailaoshan-Red River(ASRR) shear zone in SW China represents an important discontinuity believed to have accommodated eastward extrusion of the Tibetan Plateau in response to the collision of the Indian and Eurasian plates. The onset timing and duration of the ASRR sinistral strike-slip shearing have been hotly disputed. In this paper we present new zircon LA-ICP-MS U-Pb geochronological data from six syntectonic granitic mylonite and leucosomes samples from the ASRR shear zone. Our data reveal a metamorphic age of ~40 Ma, most likely suggesting the maximum age of the shearing initiation. Rocks showing syn-kinematic signatures yield crystallization ages of 38–22 Ma, with inherited components ranging from 716 to 108 Ma. These results, together with existing geological and geochronological data, indicate that the sinistral shearing along the ASRR zone probably began at 40 Ma, mainly activated at 29–22 Ma and lasted at least to ~22 Ma. Our data suggest a continuous extrusion between the Indochina and South China blocks during ~35–17 Ma. The ASRR sinistral shearing has accommodated large scale eastward displacement of the southeastern Tibetan syntaxis, and is likely responsible for the opening of the South China Sea.
基金the National Natural Science Foundation of China(Grant No.49772148) the Open Lab of the Geo-dynamics(Grant No.dlkf-9802) under the administration of the Ministry of Geology and Mineral Resources of China.
文摘A dating of two biotite samples taken from the meso- and low-temperature myloniteswithin the Shangyi-Chicheng fault belt on the north of the North China Craton yields 40Ar/39Ar iso-topic ages of (399 1) Ma and (263 2) Ma, respectively. These data reflect an Early Devonian deformation and a Late Carboniferous retrograde metamorphism event along the fault, suggesting that the tectonic activities of the North China Craton in Paleozoic should be reconsidered.
基金supported by the National Key Research and Development Program (Grant No. 2017YFC0602401)the National Natural Science Foundation of China (Grant No. 41472188)the Excellent Youth Fund of National Natural Science Foundation of China (Grant No. 41722207)
文摘Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif,especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that:(1) Diancangshan deep metamorphic rock has experienced early high-temperature leftlateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing;(2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and(3) the fluid is quite active during the syn-tectonic shearing overprinted lowtemperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif.
基金Project 49070135 supported by the National Natural Science Foundation of China
文摘The article describes the characteristics of the Yagan metamorphic core complex, especially the associated detachment fault and various extensional structures in its footwall. The age of the complex is discussed in some detail as well. The basic features of the Yagan metamorphic complex (Jurassic in age) are similar to those of the metamorphic core complex (Tertiary in age) in the Cordilleran area; they are as follows: (a) mylonitic gneisses in the footwall, (b) chloritized sheared mylonitic rocks, (c) pseudotachylites and flinty cataclasites or microbreccias, (d) unmetamorphosed or epimetamorphic rocks in the hanging wall with a layer of fault gouges or incohesive fault breccia next to the detachment fault. In contrast to its Cordilleran counterpart, however, there are many extensional faults with different styles (from dactile low-angle normal faults through brittle-ductile to brittle high-angle normal faults)in the footwall.
文摘A huge thrust system, the North Lhasa Thrust (NLT), was discovered in the northern Lhasa block of the Tibetan Plateau based on geological mapping of the Damxung region and its vicinity, the Deqen-Lunpola traverse and the Amdo-Bam Co profile. The NLT consists of the Dongqiao-Lunpola thrust (DLT), the west Namco thrust (WNT) and the south Damxung thrust (SDT) and ductile shear zones, ophiolite slices and folds extending in a WNW direction. Major thrust faults of the NLT seem to merge into a single deep-seated detachment of the upper-crust and totally displaced southward as far as 100-120 km. Chronological analyses with 39Ar-40Ar of plagioclase and hornblende, Rb-Sr isochron of minerals and fission-tracks of apatite from mylonite within the WNT yield ages of 174-173 Ma, 109 Ma and 44 Ma, showing 3 periods of thrusting in the north Lhasa block caused by subduction of the Tethys oceanic plate and the India-Eurasia continental collision respectively.
基金support from the State Key Research"973"Plan of China(No. 2009CB421001)National Natural Science Foundation of China(40872139)+1 种基金the 111 Project(B07011) of the Ministry of Education,State Key Laboratory of Geological Processes and Mineral Resources (GPMR200837)the Fundamental Research Funds for the Central Universities(GPMR2009PY01)
文摘The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan(DCS) high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River(ASRR) shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level.
基金supported by National Natural Science Foundation of China(Grant No.41102129,90714006 and 41002073)the foundation of Fundamental Science on Radioactive Geology and Exploration Technology Laboratory,East China Institute of Technology(Grant No.REGT1207)+1 种基金the Deep Exploration Technology and Experimentation Program of China(Grant No.SinoProbe-08-01-03)projects of China Geological Survey(1212011120135,1212010611803,1212011085474,1212011085473)
文摘The Yunmeng Shan metamorphic core complex (MCC) is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone (mylonite zone), chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks (Es=0.66-0.72) to protomylonites (Es=0.66-0.83), and to mylonites (Es=0.71-1.2). The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite (0.47〈Wk〈0.85) record a bulk simple-dominated general shearing at the initial evolution stage of the Yunmeng Shan MCC's detachment zone; and the extensional crenulation cleavage(ecc) (0.34〈Wk〈0.77) recorded a bulk pure-dominated general shearing at the later stage of the evolution. Kinematic vorticity measurements also show that the Yunmeng Shan MCC detachment zone is a result of a combination of simple-dominated general shearing caused by crustal extension at the early stage and pure-dominated general shearing caused by MCC uplifting at the late stage. The ductile thinning estimated by finite strain measurements and estimation of Kinematic vorticity ranges from 52% to 82%, which is the minimum thining estimation. Our studies provide new evidence for mechanisms of the Yunmeng Shan MCC detachement zone.
文摘A 100~500m\|wide mylonite zone in the Altun Group of Lower Proterozoic age was discovered along the Altyn Tagh strike\|slip fault. The zone is mainly composed of amphibolitic and granitic mylonites. The planar joints of the rocks strike in NE70 and dip steeply (nearly vertical), coincident with the striking of Altyn Tagh fault zone, and their stretched lineations are nearly horizontal. Shear strains are well developed and show sinistral sheared. The amphibolitic and granitic mylonites are most probably the products of deep\|seated melting caused by sinistral strike\|slip shearing as suggested by the evidence below: (1) The migmatization is intensely developed and spatially controlled by the shear zone, and the rock has a set of NNE perspective foliation which is in accord with the direction of the Altyn Tagh strike\|slip fault zone. (2) The recrystallized hornblende aggregate is distributed in band with obvious nebulous texture, indicating the characteristics of anatexis, and the hornblendes are oriented and form the nearly horizontal stretching lineation; some hornblendes have titanite inclusions, and magmatic long\|columnar zircons are in directional arrangement.(3) The banded felsic material is developed, and the plagioclase is characteristic of high\|temperature plastic deformation and shows sinistral shear stain. (4) In mylonites, all the axis C fabric of quartz shows the feature of sinistral shearing and the majority is generally middle to low temperature fabric, but there also exists high temperature fabric, which suggests that high temperature shearing occur in the early stage of strike\|slip deformation and it is characterized by middle to low temperature shearing at the beginning of anatexis or in the late stage of the deformation. (5) On the XZ plane of mylonite and mylonitized rocks, there exists the consistent sinistral shear stain, which suggests the products of the same strike\|slip shearing.Zircons were separated from three samples of mylonitized granitic rocks for age dating. Two groups of zircon were distinguished in morphology: one is elongate prismatic grains, and the other shows slight rounding. Some zoned structure of selected grains were examined by cathodoluminescence. Dating was completed in the SHRIMP laboratory of Stanford University. Fifteen analyses were made on 14 zircon grains. Sample S99\|25 show two obvious two age groups, one is 527~549Ma, and the other is 466~472Ma. Sample S99\|9 contains two age groups either, one is 475~507Ma and the other is 279Ma. Sample S99\|6 shows three groups: ① 528Ma; ② 365Ma and③ 238~243Ma, here the 365Ma is explained as mixture age between the other two age groups according to its exact location in the grain. In summary, from the three samples we found at least three age groups: 507~548Ma; 466~472Ma; 238~243Ma.The ages of 507Ma to 548Ma and 466Ma to 472Ma represent the deformation and metamorphism of Early Paleozoic age, which is most likely correspond to the close of the Qilian Sea and continental subduction and collision reported in recent papers (Yang Jingsui et al., 1998; Zhang Jianxin et al., 1999; Xu Zhiqin et al., 1999). The 238~243Ma most likely represent the formational age of the Altyn Tagh strike\|slip fault, which is consistent with the formational age (200~240Ma) of the large\|scale sinistral strike\|slip fault zone of the South Margin of East Kunlun (Li Haibing et al., 1996), and both can be attributed to the oblique subduction and collision of the Bayan Har terrane with the East Kunlun terrane during Indosinian period.
文摘Shibaqinghao gold deposit is situated in the western part of the northern margin of the North China Craton. It is controlled by an E-W trending tectonic zone that is located in the middle unit of Dongwufenzi group which consists of a se- quence of greenschist-facies metamorphic rocks in an Archean greenstone belt. In Shibaqinghao gold deposit there are two types of gold ore, a mylonite ore and a quartz vein ore. Mylonite ore bodies were formed during ductile shearing stage in the Early Proterozoic, whereas quartz vein ore bedies might have been fOrmed in the Mesozoic time. Pyrite accompanied with native gold in the mylonite ore has sulpfur of which ■S values range from-5. 8 to + 0. 8 per mil,similar to the values of mantle-derived sulphur. These data suggest that gold in the mylonite ore be derived from the country rocks which originated directly in the upper mantle. Pyrite in quartz vein ore has the of ■S values between + 3. 0 and + 11. 0 per mil, similar to the values of some granitic rocks. These facts indicate that the gold in the quartz vein ore is related to some granitic magma generated in the crust. This study revealed that two different mineralization occurred at different geological times and in different environments but in the same place, resuling in the Shibaqinghao gold deposit.
文摘Structural, microstructural analysis is done on the Altun fault zo ne and fault rocks. The major characteristics of faulting are summarized. Micros tructural observation reveals a complicated evolution of the fault zone. Much at tention is paid to the microstructural observation and dynamic analysis of fault ing. The occurrence of phengite grains suggest abnormally high pressure conditio ns during ductile deformation and metamorphism, while the occurrence of muscovit e-chlorite mineral assemblage suggest a low temperature and low pressure condit i on. Micro-component analysis on the inter-grown muscovite and chlorite grains gives similar information. It is concluded that the first deformation along the Altun fault zone is a type of ductile shearing, forming mylonites and mylonitic rocks along the fault zone. A post-Jurassic deformation is primarily suggested by the involvement of the l atest tectonic units (Jurassic) in the ductile deformation.The early tectonic ev ent involves deformation and metamorphism under conditions in the upper crust, w ith T-P conditions varying to a large extent (T-270℃ ~350℃; P-0.005GPa~0. 43GPa), which may be attributed to the extra tectonic stresses.
基金supported by the National Natural Science Foundation of China(No.40921001 and No.40921001)the Geological Survey of China(No.1212010818094)to Xuthe Natural Sciences and Engineering Research Council of Canada to Ji
文摘Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain unanswered. Here we reported, for the first time, frictional melting-induced pseudotachylytes in the intensively deformed felsic rocks along the ITS zone in southern Tibet. This study reveals that pseudotachylytes induced profound weakness of the boundary fault between Indian and Asian plates. The intrinsically low strength of the foliated microlites crystallized from frictional melt or glass(i.e., pseudotachylyte) at seismogenic depths compared with the surrounding coarse-grained quartzofeldspathic rocks in the brittle and semi-brittle regime is sufficient to explain the localization of shear strain, the development of ductile shear zones embedded in strong wall rocks, and the transition from the strong to weak fault behaviors without invoking the presence of high fluid pressure or low friction coefficient metasomatic materials(e.g., smectite or lizardite) within the faults.
文摘There are two types of gold ore in Shibaqinghao gold deposit, a mylonite ore and a quartz - vein ore. Pb isotope compositions for mylonite ore are characterized by lower Pb isotope ratios ranging from 16.63 to 17.45 (206Pb/204Pb), 15.31 to15.48 (207Pb/204pb), 36.52 to 38.85 (208Pb/204Pb). They are scattered very close to a model curve of the mantle evolution. These ratios suggest that gold in the mylonite ore might be derived from the country rocks, which originated directly in the upper mantle. Pb isotope compositions for quartz - vein ore are characterized by higher Pb isotope ratios ranging from 18.23 to 19.74 (206Pb/204Pb), 15.69 to 15.89 (207Pb/204Pb), 38.64 to 40. 13 (208Pb/204Pb). They are scattered very close to a model curve of the upper crustal evolution. These facts indicate that the gold in the quartz - vein ore might be related to some granitic magma generated in the crust.
文摘Recent geological study and survey on the scale of 1: 50000 in northern Guangxi have made some advancements: meta-basic-ultrabasic rocks which occured as bedding injection sheets in the Sanrnenjie formation of the Proterozoic Danzhou group and caused contact metamorphism or hydrothermal alteration in adjacent wallrocks, were originated in extensional environment. Basic rocks belong to deep-sea tholeiite. TLe meta-basic -ultrabasic rocks sufferred intense deformation partitioning, resulting in lenticular network which was composed of mylonite zones in highly de formed field and lensoids in less- or non-deformed field. This structural pattern was explained as "melange" or "non-rooted cool intrusion " by previous workers. The deformation partitioning was mainly pure shearing in the early stage plus simple shearing in the later stage. This evolution was closely related to progressive deformation of the Guangxi orogeny.