Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of...Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species（[GaO;]a） that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface（[GaO;];）, which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples（Gax-NZ5） exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield（i.e.,65.4 wt%） was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.展开更多
The catalytic conversion of polystyrene (PS) was studied in the presence of the materials type HZSM-5, CeO<sub>2</sub>, 10% CeO<sub>2</sub>/HZSM-5 and 20% CeO<sub>2</sub>/HZSM-5, wh...The catalytic conversion of polystyrene (PS) was studied in the presence of the materials type HZSM-5, CeO<sub>2</sub>, 10% CeO<sub>2</sub>/HZSM-5 and 20% CeO<sub>2</sub>/HZSM-5, which were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and nitrogen adsorption at 77K. The catalytic tests were performed via thermogravimetric analysis (TG) at heating rates of 5, 10 and 20˚C min<sup>−1</sup> in a temperature range from 30˚C to 900˚C. For the tests, a ratio of 30% by mass of each catalytic material mixed with PS was used and the activation energy of the degradation process was determined by the Vyazovkin method. The obtained results showed that the addition of the catalyst to the PS in general reduced its degradation temperature. The 10% CeO<sub>2</sub>/HZSM-5 catalyst showed greater efficiency, as it resulted in lower activation energy for PS degradation. Thus, the combination of CeO<sub>2</sub> with HZSM-5 resulted in materials with potential for application in the catalytic degradation of polystyrene and the results indicate that the production of a composite material can be a good strategy to generate an increase in catalytic activity and a decrease in energy process activation.展开更多
The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by ...The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by the impregnation of the ZSM-5 type zeolites（Si/Al=64：1）with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B（Lewis acid/Brnsted acid）,but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.展开更多
The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total ...The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature （excluding 800 ℃）. The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.展开更多
The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment （combined alkali treatment and acid leaching） of parent zeolite and its catalytic performance for benzene a...The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment （combined alkali treatment and acid leaching） of parent zeolite and its catalytic performance for benzene alkylation with methanol was investigated. The effect of post-treatment on the textural properties was characterized by various techniques （including ICP-AES, XRD, nitrogen sorption isotherms, SEM, NH3-TPD, Py-IR and TG）. The results indicated that the post-treatment could modify the structural and acidic properties of HZSM-5 zeolite. In this procedure, not only additional mesopores were created by selective extraction of silicon but also the acidity was tuned. Consequently, the modified HZSM-5 zeolite showed larger external surface area with less acid sites as compared to the parent zeolite. It was found out that the modified zeolite exhibited a higher benzene conversion and xylene selectivity for alkylation of benzene with methanol as well as excellent life span of the catalyst than conventional ones. This can be explained by the facts that the presence of additional mesopores improved the diffusion property in the reactions. Furthermore, the modified zeolite showed an appropriate Bronsted acidity for effective suppression of the side reaction of methanol to olefins, thus reduced the accumulation of coke on the HZSM-5 zeolite, which was favorable for the catalyst stability. In comparison with the parent HZSM-5 zeolite, the modified zeolite by alkali treatment and acid leaching showed better performance for the benzene alkylation with methanol.展开更多
The porous material ATZ with micro-mesopore hierarchical porosity was prepared by alkali treatment of parent HZSM-5 zeolite and applied for propane dehydrogenation. The zeolite samples were characterized by XRD, N2- p...The porous material ATZ with micro-mesopore hierarchical porosity was prepared by alkali treatment of parent HZSM-5 zeolite and applied for propane dehydrogenation. The zeolite samples were characterized by XRD, N2- physisorption, and NH3-TPD analysis. The results showed that the alkali treatment can modify the physicochemical prop- erties of HZSM-5 zeolite. In this case, the porous material ATZ showed larger extemal surface area with less acid sites as compared to the HZSM-5 zeolite. It was found out that the alkali treatment of HZSM-5 zeolite could promote the catalytic performance of PtSn/ATZ catalyst. The possible reason was ascribed to the low acidity of ATZ. Furthermore, the presence of mesopores could reduce the carbon deposits on the metallic surface, which was also favorable for the dehydrogenation reaction.展开更多
In this work,n-pentane catalytic cracking over HZSM-5 zeolites was studied at 650°C under atmosphere pressure.A particular attention was paid to the measurement of n-pentane conversion,light olefins production,pr...In this work,n-pentane catalytic cracking over HZSM-5 zeolites was studied at 650°C under atmosphere pressure.A particular attention was paid to the measurement of n-pentane conversion,light olefins production,product distribution,coke deposit,etc.Several indexes were defined to evaluate the effects of operating conditions on the catalytic performance of HZSM-5 zeolites.It was found that decreasing the weight hourly space velocity,increasing the reactant partial pressure,and increasing the carrier gas flow rate could inhibit C-H bond breaking and enhance the C-C bond breaking and hydride transfer reactions,leading to reduced alkenes selectivity,which suppressed the formation of external coke and alleviated the deactivation of HZSM-5 zeolites.It was deduced that the catalytic stability of HZSM-5 zeolites was improved at the cost of alkenes selectivity.Compared with decreasing the weight hourly space velocity and increasing the reactant partial pressure,increasing the carrier gas flow rate could enhance the diffusion process and protect alkenes from being consumed in coke formation in order to improve the catalytic stability of HZSM-5 zeolites with less reduction of alkenes selectivity.展开更多
Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673 K were investigated. The acidity and distribution of acidic sites were studied by infrared spect...Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673 K were investigated. The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desorption (TPD) of ammonia. The structure of the samples was characterized by XRD, and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy (SEM). The XRD results show that the modified samples have no novel crystalline phase, indicating a high dispersion of phosphorus and boron species. After treatment, the microporous volume and surface area of the samples markedly decrease, implying the blockage of the channel. The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type I and IV, and all hysteresis loops resemble the H4-type in the IUPAC classification. The total acidity of the modified samples, determined by pyridine adsorption IR and TPD of ammonia, decreases in contrast to that of the parent HZSM-5. The conversion of n-heptane over P and B steam-modified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.展开更多
Toluene pretreatment caused many activated toluene species existing on the surface of zeolite HZSM-5, by which the activity of sample was increased. Moreover, variation in the surface Si+/Al+ ratio of HZSM-5 was sensi...Toluene pretreatment caused many activated toluene species existing on the surface of zeolite HZSM-5, by which the activity of sample was increased. Moreover, variation in the surface Si+/Al+ ratio of HZSM-5 was sensitively detected by FABMS.展开更多
The effect of steam-treatment to HZSM-5 zeolite and Mo/HZSM-5 with a steaming time range of 0.5-1 h on the catalytic performance of methane dehydro-aromatization （MDA） over Mo/HZSM-5 catalyst prepared with impregnat...The effect of steam-treatment to HZSM-5 zeolite and Mo/HZSM-5 with a steaming time range of 0.5-1 h on the catalytic performance of methane dehydro-aromatization （MDA） over Mo/HZSM-5 catalyst prepared with impregnation has been studied in detail in combination with the characterization of 1H MAS NMR technique. Both the deactivation rate constant （kd） and the Brtnsted acid sites per unit cell were calculated to quantitatively evaluate the stability of Mo/HZSM-5 catalysts treated with steam at 813 K before and after impregnation of molybdenum species, and the corresponding variation of their Brtnsted acid sites. The results reveal that a V-shape relationship between kd and the number of B 1 acid sites per unit cell is presented on Mo/HZSM-5 catalyst under the tested steam-treatment and reaction conditions.展开更多
The influence of adding Fe, Cr, Co, and Ga into 3%Mo/HZSM-5 catalyst on methane aromatization, and the influence of additives ratio on methane conversion, selectivity to hydrocarbons and coke, as well as distribution ...The influence of adding Fe, Cr, Co, and Ga into 3%Mo/HZSM-5 catalyst on methane aromatization, and the influence of additives ratio on methane conversion, selectivity to hydrocarbons and coke, as well as distribution of aromatics were investigated. The experimental results showed that the addition of Fe, Cr, Co and Ga promoted the dehydrogenation and dissociation of methane. The results of NH3-TPD indicated that the acidity of HZSM-5 was changed by adding Fe and Co components, consequently the catalytic properties of Mo/HZSM-5 were changed. It was also revealed that strong acid sites were the center of methane aromatization. The results of XRD characterization showed that the crystallinity of Mo on ZSM-5 zeolite was increased after adding Fe, Co additives.展开更多
The modification of HZSM-5 zeolite with phosphorus and steam has been studied. Results show that 1% phosphorus and steam modified HZSM-5 has the highest catalytic activity for n-heptane. Physicochemical and catalytic ...The modification of HZSM-5 zeolite with phosphorus and steam has been studied. Results show that 1% phosphorus and steam modified HZSM-5 has the highest catalytic activity for n-heptane. Physicochemical and catalytic properties of 1% phosphorus and steam modified HZSM-5 zeolites have been investigated. The X-ray diffraction （XRD） results exhibit that there is considerable variation in the relative intensity of the individual diffraction peaks. The acidity of the samples decreases with an increase in the steaming temperature, which is determined by the IR of adsorbed pyridine and temperature programmed desorption （TPD） of ammonia. The oxidation state of phosphorus shown by XPS is ＋5, and a model for surface structure modification is proposed. The nitrogen adsorption isotherm for all samples is a combination of type I and type IV, all hysteresis loops resemble the H4-type. The density functional and cluster model methods have been invoked to select the phosphorus grafting model, and it was found that the phosphorus grafting model were more probable in the form of the terminal oxygen coordinating with aluminum.展开更多
Silver modified HZSM-5 （AgHZ） zeolite catalysts were prepared by ion exchange method and their catalytic properties in the l-butene cracking reaction were measured. The catalysts were characterized by infrared spec-...Silver modified HZSM-5 （AgHZ） zeolite catalysts were prepared by ion exchange method and their catalytic properties in the l-butene cracking reaction were measured. The catalysts were characterized by infrared spec- troscopy with pyridine adsorption （Py-IR）, N2 adsorption and X-ray diffraction （XRD）. The effects of Ag loading and steaming treatment on catalytic performances were studied. It is found that the activity ofHT_SM-5 （HZ） catalyst significantly decreases with the steaming time, whereas AgHZ catalysts show stable activity in the steaming time of 24-48 h and their activities increase with the Ag loading. When the steaming time is 24-48 h, the yield of propylene over HZ catalyst significantly decreases, whereas it is stable over AgHZ catalysts. The AgHZ catalysts with Ag loadings of 0.28%-0.43% （by mass） show similar propylene yields （-30%）, which are higher than that over the AgHZ catalyst with a Ag loading of 0.55% （by mass）. These results indicate that the steam-treated AgHZ catalysts with optimum Ag loadings have higher yield of propylene and are more stable than the steam- treated HZ catalyst. The regeneration stability measurement in butene cracking also shows that the AgHZ catalyst steam-treated under a suitable condition has better stability than the HZ catalyst.展开更多
基金supported by the National Natural Science Foundation of China(Nos.21276067 and 21676074)Programs of International S&T cooperation(No.2014DFR41110)
文摘Nanosized Ga-containing ZSM-5 zeolites were prepared via isomorphous substitution and impregnation followed by characterized using various techniques. The catalytic performance of the zeolites for the aromatization of 1-hexene was investigated. The results indicate that isomorphous substitution promotes the incorporation of Ga heteroatoms into the framework along with the formation of extra-framework GaO;species（[GaO;]a） that have stronger interactions with the negative potential of the framework. In addition, based on the Py-IR results and catalytic performance, the [GaO;]aspecies with stronger Lewis acid sites produced a better synergism with moderate Br?nsted acid sites and thus improved the selectivity to aromatic compounds. However, the impregnation results in the formation of Ga;O;phase and small amounts of GaO;species that are mainly located on the external surface（[GaO;];）, which contribute to weaker Lewis acid sites due to weaker interactions with the zeolite framework. During 1-hexene aromatization, the nanosized Ga isomorphously substituted ZSM-5 zeolite samples（Gax-NZ5） exhibited better catalytic performance compared to the impregnated samples, and the highest aromatic yield（i.e.,65.4 wt%） was achieved over the Ga4.2-NZ5 sample, which contained with the highest Ga content.
文摘The catalytic conversion of polystyrene (PS) was studied in the presence of the materials type HZSM-5, CeO<sub>2</sub>, 10% CeO<sub>2</sub>/HZSM-5 and 20% CeO<sub>2</sub>/HZSM-5, which were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and nitrogen adsorption at 77K. The catalytic tests were performed via thermogravimetric analysis (TG) at heating rates of 5, 10 and 20˚C min<sup>−1</sup> in a temperature range from 30˚C to 900˚C. For the tests, a ratio of 30% by mass of each catalytic material mixed with PS was used and the activation energy of the degradation process was determined by the Vyazovkin method. The obtained results showed that the addition of the catalyst to the PS in general reduced its degradation temperature. The 10% CeO<sub>2</sub>/HZSM-5 catalyst showed greater efficiency, as it resulted in lower activation energy for PS degradation. Thus, the combination of CeO<sub>2</sub> with HZSM-5 resulted in materials with potential for application in the catalytic degradation of polystyrene and the results indicate that the production of a composite material can be a good strategy to generate an increase in catalytic activity and a decrease in energy process activation.
基金Project supported by the National Basic Research Program of China(2004CB2178062005CB221402)+1 种基金the National NaturalScience Foundation of China(20373043)Young Scientists Innovation Foundation of CNPC(04E7025)
文摘The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by the impregnation of the ZSM-5 type zeolites（Si/Al=64：1）with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B（Lewis acid/Brnsted acid）,but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.
基金The authors would like to thank the financial support from the National Basic Research Program of China fgrant No．2004CB 217806)the National Natural Science Foundation of China (Grant No．20373043) the Scientific Research Key Foundation for the Returned Overseas Chinese Scholars of State Education Ministry．
文摘The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature （excluding 800 ℃）. The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.
基金Supported by the National Natural Science Foundation of China(NSFC-21476207 and NSFC-21506189)the National Basic Research Program of China(973 Program)(2011CB710800)
文摘The porous material HZSM-5 zeolite with micro-mesopore hierarchical porosity was prepared by post-treatment （combined alkali treatment and acid leaching） of parent zeolite and its catalytic performance for benzene alkylation with methanol was investigated. The effect of post-treatment on the textural properties was characterized by various techniques （including ICP-AES, XRD, nitrogen sorption isotherms, SEM, NH3-TPD, Py-IR and TG）. The results indicated that the post-treatment could modify the structural and acidic properties of HZSM-5 zeolite. In this procedure, not only additional mesopores were created by selective extraction of silicon but also the acidity was tuned. Consequently, the modified HZSM-5 zeolite showed larger external surface area with less acid sites as compared to the parent zeolite. It was found out that the modified zeolite exhibited a higher benzene conversion and xylene selectivity for alkylation of benzene with methanol as well as excellent life span of the catalyst than conventional ones. This can be explained by the facts that the presence of additional mesopores improved the diffusion property in the reactions. Furthermore, the modified zeolite showed an appropriate Bronsted acidity for effective suppression of the side reaction of methanol to olefins, thus reduced the accumulation of coke on the HZSM-5 zeolite, which was favorable for the catalyst stability. In comparison with the parent HZSM-5 zeolite, the modified zeolite by alkali treatment and acid leaching showed better performance for the benzene alkylation with methanol.
基金the Production and Research Prospective Joint Research Project(BY2009153)Science and the National Nature Science Foundation of China(50873026,21106017)for financial supportthe Specialized Research Fund for the Doctoral Program of Higher Education of China(20100092120047)
文摘The porous material ATZ with micro-mesopore hierarchical porosity was prepared by alkali treatment of parent HZSM-5 zeolite and applied for propane dehydrogenation. The zeolite samples were characterized by XRD, N2- physisorption, and NH3-TPD analysis. The results showed that the alkali treatment can modify the physicochemical prop- erties of HZSM-5 zeolite. In this case, the porous material ATZ showed larger extemal surface area with less acid sites as compared to the HZSM-5 zeolite. It was found out that the alkali treatment of HZSM-5 zeolite could promote the catalytic performance of PtSn/ATZ catalyst. The possible reason was ascribed to the low acidity of ATZ. Furthermore, the presence of mesopores could reduce the carbon deposits on the metallic surface, which was also favorable for the dehydrogenation reaction.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China(Grant No.21908010)the Education Department of Jilin Province(Grant No.JJKH20191314KJ)the Changchun University of Technology.
文摘In this work,n-pentane catalytic cracking over HZSM-5 zeolites was studied at 650°C under atmosphere pressure.A particular attention was paid to the measurement of n-pentane conversion,light olefins production,product distribution,coke deposit,etc.Several indexes were defined to evaluate the effects of operating conditions on the catalytic performance of HZSM-5 zeolites.It was found that decreasing the weight hourly space velocity,increasing the reactant partial pressure,and increasing the carrier gas flow rate could inhibit C-H bond breaking and enhance the C-C bond breaking and hydride transfer reactions,leading to reduced alkenes selectivity,which suppressed the formation of external coke and alleviated the deactivation of HZSM-5 zeolites.It was deduced that the catalytic stability of HZSM-5 zeolites was improved at the cost of alkenes selectivity.Compared with decreasing the weight hourly space velocity and increasing the reactant partial pressure,increasing the carrier gas flow rate could enhance the diffusion process and protect alkenes from being consumed in coke formation in order to improve the catalytic stability of HZSM-5 zeolites with less reduction of alkenes selectivity.
基金Financial support from Catalytic Key Laboratory of China Petroleum and Natural Gas Group Corpo- ration (University of Petroleum) was greatly appre- ciated. We thank the National Science Foundation Committee for Grant NSFC 20233030.
文摘Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673 K were investigated. The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desorption (TPD) of ammonia. The structure of the samples was characterized by XRD, and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy (SEM). The XRD results show that the modified samples have no novel crystalline phase, indicating a high dispersion of phosphorus and boron species. After treatment, the microporous volume and surface area of the samples markedly decrease, implying the blockage of the channel. The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type I and IV, and all hysteresis loops resemble the H4-type in the IUPAC classification. The total acidity of the modified samples, determined by pyridine adsorption IR and TPD of ammonia, decreases in contrast to that of the parent HZSM-5. The conversion of n-heptane over P and B steam-modified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.
文摘Toluene pretreatment caused many activated toluene species existing on the surface of zeolite HZSM-5, by which the activity of sample was increased. Moreover, variation in the surface Si+/Al+ ratio of HZSM-5 was sensitively detected by FABMS.
基金supported by Foundation for University Key Teacher by the Education of Heilongjiang Province(No.1152G018)
文摘The effect of steam-treatment to HZSM-5 zeolite and Mo/HZSM-5 with a steaming time range of 0.5-1 h on the catalytic performance of methane dehydro-aromatization （MDA） over Mo/HZSM-5 catalyst prepared with impregnation has been studied in detail in combination with the characterization of 1H MAS NMR technique. Both the deactivation rate constant （kd） and the Brtnsted acid sites per unit cell were calculated to quantitatively evaluate the stability of Mo/HZSM-5 catalysts treated with steam at 813 K before and after impregnation of molybdenum species, and the corresponding variation of their Brtnsted acid sites. The results reveal that a V-shape relationship between kd and the number of B 1 acid sites per unit cell is presented on Mo/HZSM-5 catalyst under the tested steam-treatment and reaction conditions.
文摘The influence of adding Fe, Cr, Co, and Ga into 3%Mo/HZSM-5 catalyst on methane aromatization, and the influence of additives ratio on methane conversion, selectivity to hydrocarbons and coke, as well as distribution of aromatics were investigated. The experimental results showed that the addition of Fe, Cr, Co and Ga promoted the dehydrogenation and dissociation of methane. The results of NH3-TPD indicated that the acidity of HZSM-5 was changed by adding Fe and Co components, consequently the catalytic properties of Mo/HZSM-5 were changed. It was also revealed that strong acid sites were the center of methane aromatization. The results of XRD characterization showed that the crystallinity of Mo on ZSM-5 zeolite was increased after adding Fe, Co additives.
文摘The modification of HZSM-5 zeolite with phosphorus and steam has been studied. Results show that 1% phosphorus and steam modified HZSM-5 has the highest catalytic activity for n-heptane. Physicochemical and catalytic properties of 1% phosphorus and steam modified HZSM-5 zeolites have been investigated. The X-ray diffraction （XRD） results exhibit that there is considerable variation in the relative intensity of the individual diffraction peaks. The acidity of the samples decreases with an increase in the steaming temperature, which is determined by the IR of adsorbed pyridine and temperature programmed desorption （TPD） of ammonia. The oxidation state of phosphorus shown by XPS is ＋5, and a model for surface structure modification is proposed. The nitrogen adsorption isotherm for all samples is a combination of type I and type IV, all hysteresis loops resemble the H4-type. The density functional and cluster model methods have been invoked to select the phosphorus grafting model, and it was found that the phosphorus grafting model were more probable in the form of the terminal oxygen coordinating with aluminum.
基金Supported by the National Science Foundation of China(U1162129)the Science and Technology Department of Zhejiang Province(2009R50020)
文摘Silver modified HZSM-5 （AgHZ） zeolite catalysts were prepared by ion exchange method and their catalytic properties in the l-butene cracking reaction were measured. The catalysts were characterized by infrared spec- troscopy with pyridine adsorption （Py-IR）, N2 adsorption and X-ray diffraction （XRD）. The effects of Ag loading and steaming treatment on catalytic performances were studied. It is found that the activity ofHT_SM-5 （HZ） catalyst significantly decreases with the steaming time, whereas AgHZ catalysts show stable activity in the steaming time of 24-48 h and their activities increase with the Ag loading. When the steaming time is 24-48 h, the yield of propylene over HZ catalyst significantly decreases, whereas it is stable over AgHZ catalysts. The AgHZ catalysts with Ag loadings of 0.28%-0.43% （by mass） show similar propylene yields （-30%）, which are higher than that over the AgHZ catalyst with a Ag loading of 0.55% （by mass）. These results indicate that the steam-treated AgHZ catalysts with optimum Ag loadings have higher yield of propylene and are more stable than the steam- treated HZ catalyst. The regeneration stability measurement in butene cracking also shows that the AgHZ catalyst steam-treated under a suitable condition has better stability than the HZ catalyst.
