A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morpho...A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.展开更多
The non-isothermal crystallization dynamic behavior and mechanism of plasma sprayed Fe_(48)Cr_(15)Mo_(14)C_(15)B_(6)Y_(2)coating were thoroughly studied.The phase transition and crystallization kinetics of the coating...The non-isothermal crystallization dynamic behavior and mechanism of plasma sprayed Fe_(48)Cr_(15)Mo_(14)C_(15)B_(6)Y_(2)coating were thoroughly studied.The phase transition and crystallization kinetics of the coating were elaborately investigated by differential scanning calorimetry(DSC),X-ray diffraction(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).The findings reveal that the characteristic temperatures of the coating shift to an elevated temperature at a higher heating rate and the crystallization processes are thermally activated.The 3-rd step of crystallization processes is more susceptible to the continuously increased heating rate while the onset crystallization reaction is less sensitive to the continuously enhanced heating rate.Fe_(23)(C,B)_6 phase is inclined to precipitate than other crystal phases due to the substantial pre-generation ofα-Fe.The onset nucleation and growth ofα-Fe crystals is tough due to a higher onset apparent activation energy.Meanwhile,the transformation from Fe_(23)(C,B)_(6)to FeB is harder in comparison with the precipitation of other crystals.The most parts of the three crystallization processes are dominated by three-dimensional diffusion model due to the fact that most values of local Avrami exponent are higher than 2.5.展开更多
Polypropylene is commonly used as a binder for ceramic injection molding,and rapid cooling is often encountered during processing.However,the crystallization behavior of polypropylene shows a strong dependence on cool...Polypropylene is commonly used as a binder for ceramic injection molding,and rapid cooling is often encountered during processing.However,the crystallization behavior of polypropylene shows a strong dependence on cooling rate due to its semi-crystalline characteristics.Therefore,the influence of cooling rate on the quality of final product cannot be ignored.In this study,the fast differential scanning calorimetry(FSC)test was performed to study the influence of cooling rate on the non-isothermal crystallization behavior and non-isothermal crystallization kinetics of a copolymer polypropylene(PP BC03B).The results show that the crystallization temperatures and crystallinity decrease as the cooling rate increases.In addition,two exothermic peaks occur when cooling rate ranges from 30 to 300 K·s^(-1),indicating the formation of another crystal phase.Avrami,Ozawa and Mo equations were used to explore the non-isothermal crystallization kinetics,and it can be concluded that the Mo method is suitable for this study.展开更多
In order to develop limonite and decrease CO_(2) emissions,siderite is proposed as a clean reductant for suspension magnetization roasting(SMR) of limonite.An iron concentrate(iron grade:65.92wt%,iron recovery:98.54wt...In order to develop limonite and decrease CO_(2) emissions,siderite is proposed as a clean reductant for suspension magnetization roasting(SMR) of limonite.An iron concentrate(iron grade:65.92wt%,iron recovery:98.54wt%) was obtained by magnetic separation under the optimum SMR conditions:siderite dosage 40wt%,roasting temperature 700℃,roasting time 10 min.According to the magnetic analysis,SMR achieved the conversion of weak magnetic minerals to strong magnetic minerals,thus enabling the recovery of iron via magnetic separation.Based on the phase transformation analysis,during the SMR process,limonite was first dehydrated and converted to hematite,and then siderite decomposed to generate magnetite and CO,where CO reduced the freshly formed hematite to magnetite.The microstructure evolution analysis indicated that the magnetite particles were loose and porous with a destroyed structure,making them easier to be ground.The non-isothermal kinetic results show that the main reaction between limonite and siderite conformed to the two-dimension diffusion mechanism,suggesting that the diffusion of CO controlled the reaction.These results encourage the application of siderite as a reductant in SMR.展开更多
A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifie...A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.展开更多
Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning cal...Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.展开更多
The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide...The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide-angle X-ray diffraction （WAXD）. The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity. Under quiescent conditions, the morphology assumes different sized spherulites, and its crystallinity dramatically reduces with increasing the cooling rate. On the other hand, the shear flow increases the onset crystallization temperature, and enhances the final crystallinity. When the shear rate is above 5 s^-1, cylindrite-like crystals are observed, furthermore, their content depends on the cooling rate.展开更多
The non-isothermal crystallization kinetics of polyamide 6/diamine-modified multi-walled carbon nanotube （PA6/D-MWNT） nanocomposite was investigated by differential scanning calorimetry （DSC）. The modified Avrami ...The non-isothermal crystallization kinetics of polyamide 6/diamine-modified multi-walled carbon nanotube （PA6/D-MWNT） nanocomposite was investigated by differential scanning calorimetry （DSC）. The modified Avrami equation, the Ozawa equation and the combined Avrami/Ozawa equation were employed to analyze the non-isothermal crystallization data. The crystallization activation energies were also evaluated by the Kissinger method. It was found that the combined Avrami/Ozawa equation could successfully describe the non-isothermal crystallization process. The results showed that D-MWNTs not only acted as effective heterogeneous nucleating agents for PA6 and noticeably increased the crystallization temperature of PA6, but also influenced the mechanism of nucleation and crystal growth of PA6 and then reduced the overall crystallization rate of the neat PA6 matrix. The crystallization activation energy for the nanocomposite sample was greater than that of the neat PA6, which indicated that the addition of D-MWNTs hindered the mobility of PA6 chain segments.展开更多
The non-isothermal crystallization kinetics of polypropylene （PP）, PP/anhydrite composites were investigated by differential scanning calorimetry （DSC） with various cooling rates. The Avrami analysis modified by J...The non-isothermal crystallization kinetics of polypropylene （PP）, PP/anhydrite composites were investigated by differential scanning calorimetry （DSC） with various cooling rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the non-isothermal crystallization process of these samples. The difference in the exponent n between PP and PP/anhydrite composites indicated that non-isothermal kinetic crystallization corresponded to tri-dimensional growth with heterogeneous nucleation. The values of half-time, Zc and F（T） showed that the crystallization rate increased with the increasing of cooling rates for PP and PP/anhydrite composites, but the crystallization rate of PP/anhydrite composites was faster than that of PP at a given cooling rate. The method developed by Ozawa did not describe the non-isothermal crystallization process of PP very well. Moreover, the method proposed by Kissinger was used to evaluate the activation energy of the mentioned samples. The result showed that the activation energy of PP/anhydrite was greatly larger than that of PP.展开更多
A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curve...A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curves of non-isothermal and isothermal crystallizations were analysed and compared for poly (ethylene terephthalate) (PET), and the results were discussed.展开更多
The non-isothermal crystallization kinetics of reactive microgel/nylon 6 blends was investigated by differential scanning calorimetry(DSC). The Mo equation was employed to analyze the non-isothermal crystallization da...The non-isothermal crystallization kinetics of reactive microgel/nylon 6 blends was investigated by differential scanning calorimetry(DSC). The Mo equation was employed to analyze the non-isothermal crystallization data. The crystallization activation energies were also evaluated by the Kissinger method. The results show that the crystallization onset temperature(T onset) and crystallization peak temperature(T p) decrease with the increase of the content of reactive microgel, while ΔT(T onset–T p), the crystallization half-time(t1/2) and the crystallization enthalpy(ΔH c) increase. The required cooling rates of blends are higher than that of neat nylon6 in order to achieve the same relative crystallinity in a unit of time. The crystallization activation energies of the reactive microgel/nylon 6 blends are greater than those of the neat nylon 6. When the content of reactive microgel is 30%, the relative crystallinity(X t) reaches the maximum.展开更多
Fiber-class modified kaolin and PET have been blended in the twin-screw and granulated to chips containing 4 wt% of kaolin.Non-isothermal crystallization process of kaolin modified polyester was investigated using a d...Fiber-class modified kaolin and PET have been blended in the twin-screw and granulated to chips containing 4 wt% of kaolin.Non-isothermal crystallization process of kaolin modified polyester was investigated using a differential scanning calorimetry （DSC）,and the addition of kaolin enhances either the melting temperature （Tm） or the crystallization temperature （Tc）.The morphology of kaolin modified polyester,the melt of which is cooled at different cooling rate,was observed by scanning electron microscope （SEM）.The relationship between Tc and cooling rate F was studied.Semi-crystalline phase t1/2 makes an exponential decline with increasing F,and the higher the cooling rate,the shorter the time of crystallization completion.Non-isothermal crystallization kinetics parameters and the activation energy were calculated,indicating that the higher rate of cooling needs the higher relative crystallinity in the unit crystallization time,the crystallization rate increased while speeding up the temperature reduction,and the activation energy ΔE was calculated to be-204.1566 kJ/mol for the non-isothermal crystallization processes by the Kissinger＇s methods.展开更多
An equation of non-isothermal crystallization kinetics was derived according to a new model and the crystallizations of both the PET samples under solid state polycon-densation and the pre-orientation yarn of high spe...An equation of non-isothermal crystallization kinetics was derived according to a new model and the crystallizations of both the PET samples under solid state polycon-densation and the pre-orientation yarn of high speeding spinning PET were studied with this equation. The results show that there is a good linear relationship between In {-In[1-X(T)]} and lnΦ. The index m in the equation approximately equals to 3 for PET chips and 1. 3 for pre-orientated yarn. At the same temperature, Q(T) decreases with the increase of PET M. W. and the kinetics parameters obtained by Jeziorny' s method indicate that G also decreases with the increase of PET M. W.. Q(T) and Gc show the same varying tendency in the non-isothermal crystallization process.展开更多
In this paper we have presented the results of acoustic emission (AE) during non-isothemal crystallization of polypropylene (PP) melt with mean cooling rate 4℃/min, and discussed the effects of molecular weight (MW) ...In this paper we have presented the results of acoustic emission (AE) during non-isothemal crystallization of polypropylene (PP) melt with mean cooling rate 4℃/min, and discussed the effects of molecular weight (MW) on AE activity. It is shown that the amount of AE ring-down counts during whole crystallization of PP depends on the MW strongly.The copious AE bursts have been observed at the late stage of PPcrystallization. AE bursts are caused by cracking, crazing and cavitation between spherulites and inside spherulites.展开更多
The non-isothermal crystallization kinetics of modified poly(ethylene terephthalate) (PET) with the function of ultraviolet (UV) protection was studied by means of differential scanning calorimetry. The kinetics of th...The non-isothermal crystallization kinetics of modified poly(ethylene terephthalate) (PET) with the function of ultraviolet (UV) protection was studied by means of differential scanning calorimetry. The kinetics of the modified polymer under non-isothermal crystallization was analyzed by Ozawa equation. The crystallization behavior of the modified polymer obeyed Ozawa theory. The additives in the polymer whose function was UV-resistant acted as crystal nucleus in the processing of crystallization, which resulted in the increase of Avrami index and the crystallization rate of the cooling system.展开更多
The kineties of non-isothermal crystallization of Nylon-1010 has been investigated by using differential scanning calorimetry(DSC), DSC curves were obtained under cooling rate(R): 2. 5, 5, 10, 20, 40K/min. Applying Ma...The kineties of non-isothermal crystallization of Nylon-1010 has been investigated by using differential scanning calorimetry(DSC), DSC curves were obtained under cooling rate(R): 2. 5, 5, 10, 20, 40K/min. Applying Mandelkern and Ziabicki theories, the values of the Z kinetic parameter and G the kinetic crystalllzab- ility have been determined. Expenents of Avrami obtained in this work decrease with increase of cooling rate and then level off. The experimental results show disagreements with the Ozawa equation.展开更多
The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship...The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m^0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.展开更多
This work deals with isothermal and non-isothermal crystallization kinetics of electrically conductive polyvinylidene fluoride/poly(ethylene terephthalate) (PVDF/PET) based composites. It completes our previous work i...This work deals with isothermal and non-isothermal crystallization kinetics of electrically conductive polyvinylidene fluoride/poly(ethylene terephthalate) (PVDF/PET) based composites. It completes our previous work in which we related the crystallinity of these conductive PVDF/PET based composites to their through-plane resistivity [1]. Isothermal crystallization was described using the logarithmic form of the Avrami equation and it was observed that the crystallization rate of the PVDF phase inside the composite became slower compared to that of neat PVDF. In non-isothermal crystallization, the Avrami exponent of PVDF phase did not show any noticeable variation;however, that of PET phase, which contains the major part of the conductive carbon black (CB) and graphite (GR) additives, showed an evident decrease compared with neat PET. It was also observed that, at the same cooling rate, the crystallization rate of PVDF and PET phases inside the composite was slower than that of neat PVDF and PET.展开更多
The effect of yttrium on the thermal stability and crystallization behavior of Nd-Fe-Al-Ni amorphous alloys was investigated using X-ray diffraction （XRD）, differential scanning calorimeter （DSC）, and transmission...The effect of yttrium on the thermal stability and crystallization behavior of Nd-Fe-Al-Ni amorphous alloys was investigated using X-ray diffraction （XRD）, differential scanning calorimeter （DSC）, and transmission electron microscopy （TEM）.The results indicated that the as-cast Nd60Fe20Al10Ni10-xYx（X=-0, 2） amorphous alloys were fabricated with some quenched-in crystals, which could be restrained by Y. With the effect of yttrium, both the crystallization temperature and exothermic peak shifted to higher temperatures, illustrating that the thermal stability could be improved. The addition of Y changed the crystallization process and final crystallization results. Moreover, the crystallites in the amorphous matrix became more homogeneous and smaller. Meanwhile, Y was useful for the passivation of oxygen in chemistry and restrained the negative effect of oxygen. The activation energies of the start of crystallization and peaking were 1.21 and 1.16 eV, respectively, according to the Kissinger equation.展开更多
In this article, we prove the global existence of weak solutions to the non- isothermal nematic liquid crystal system on T2, on the basis of a new approximate system which is different from the classical Ginzburg-Land...In this article, we prove the global existence of weak solutions to the non- isothermal nematic liquid crystal system on T2, on the basis of a new approximate system which is different from the classical Ginzburg-Landau approximation. Local in space energy inequalities are employed to recover the estimates on the second order spatial derivatives of the director fields locally in time, which cannot be derived from the basic energy balance. It is shown that these weak solutions satisfy the temperature equation, and also the total energy equation but away from at most finite many ＂singular＂ times, at which the energy concentration occurs and the director field losses its second order derivatives.展开更多
文摘A binary alloy consisting of poly（phenylene-sulfide） （PPS）/poly（ethylene terephthalate-co-l,4- cyclohexanedimethanol） （PETG） was prepared by the melt blending technology using a twin-screw extruder. The morphology and crystallization behavior of the alloy material were investigated by means of SEM, POM and DSC. The SEM study of the alloy samples revealed that PPS and PETG comprised an incompatible system and the interface structure of two phases could be observed distinctly when the composition of the binary alloy was being changed. The POM results had revealed that incorporation of PETG into PPS could lead to formation of larger spherulite crystals in the course of PPS crystallization, but small and grainy spherulite crystals appeared with further increase in the PETG concentration. The DSC analyses revealed that addition of PETG to the alloy composition could shift the PPS crystallization temperature towards the high-temperature region.
基金Funded by the China Scholarship Council(No.201906710142)。
文摘The non-isothermal crystallization dynamic behavior and mechanism of plasma sprayed Fe_(48)Cr_(15)Mo_(14)C_(15)B_(6)Y_(2)coating were thoroughly studied.The phase transition and crystallization kinetics of the coating were elaborately investigated by differential scanning calorimetry(DSC),X-ray diffraction(XRD),scanning electron microscopy(SEM),and transmission electron microscopy(TEM).The findings reveal that the characteristic temperatures of the coating shift to an elevated temperature at a higher heating rate and the crystallization processes are thermally activated.The 3-rd step of crystallization processes is more susceptible to the continuously increased heating rate while the onset crystallization reaction is less sensitive to the continuously enhanced heating rate.Fe_(23)(C,B)_6 phase is inclined to precipitate than other crystal phases due to the substantial pre-generation ofα-Fe.The onset nucleation and growth ofα-Fe crystals is tough due to a higher onset apparent activation energy.Meanwhile,the transformation from Fe_(23)(C,B)_(6)to FeB is harder in comparison with the precipitation of other crystals.The most parts of the three crystallization processes are dominated by three-dimensional diffusion model due to the fact that most values of local Avrami exponent are higher than 2.5.
基金financially supported by a grant provided by Mitsubishi Heavy Industries。
文摘Polypropylene is commonly used as a binder for ceramic injection molding,and rapid cooling is often encountered during processing.However,the crystallization behavior of polypropylene shows a strong dependence on cooling rate due to its semi-crystalline characteristics.Therefore,the influence of cooling rate on the quality of final product cannot be ignored.In this study,the fast differential scanning calorimetry(FSC)test was performed to study the influence of cooling rate on the non-isothermal crystallization behavior and non-isothermal crystallization kinetics of a copolymer polypropylene(PP BC03B).The results show that the crystallization temperatures and crystallinity decrease as the cooling rate increases.In addition,two exothermic peaks occur when cooling rate ranges from 30 to 300 K·s^(-1),indicating the formation of another crystal phase.Avrami,Ozawa and Mo equations were used to explore the non-isothermal crystallization kinetics,and it can be concluded that the Mo method is suitable for this study.
基金financially supported by the National Natural Science Foundation of China(Nos.51874071 and 52022019)。
文摘In order to develop limonite and decrease CO_(2) emissions,siderite is proposed as a clean reductant for suspension magnetization roasting(SMR) of limonite.An iron concentrate(iron grade:65.92wt%,iron recovery:98.54wt%) was obtained by magnetic separation under the optimum SMR conditions:siderite dosage 40wt%,roasting temperature 700℃,roasting time 10 min.According to the magnetic analysis,SMR achieved the conversion of weak magnetic minerals to strong magnetic minerals,thus enabling the recovery of iron via magnetic separation.Based on the phase transformation analysis,during the SMR process,limonite was first dehydrated and converted to hematite,and then siderite decomposed to generate magnetite and CO,where CO reduced the freshly formed hematite to magnetite.The microstructure evolution analysis indicated that the magnetite particles were loose and porous with a destroyed structure,making them easier to be ground.The non-isothermal kinetic results show that the main reaction between limonite and siderite conformed to the two-dimension diffusion mechanism,suggesting that the diffusion of CO controlled the reaction.These results encourage the application of siderite as a reductant in SMR.
基金Funded by the Natural Science Foundation of Liaoning Province of China(No.20180550432)Natural Science Foundation for Young Doctoral Research(No.2020-BS-158)Basic Scientific Research Project of Colleges and Universities of Liaoning Provincial Department of Education(No.LJKQZ2021060)。
文摘A novel polypropylene random(PPR)composite materials with optimized properties was developed by addingβ-nucleating compound agents(rare earth complex WBG-2 and aryl amide derivative TMB-5)and ternary compound modifier(TPE/WBG-2/CaCO_(3)).The effects of differentβ-nucleating agents and ternary compound modifier on the mechanical properties and crystallization behavior of PPR were analyzed.The results show that,compared with pure PPR materials,both WBG-2 and TMB-5 could significantly improve the impact strength of PPR.The crystallization temperature of PPR increased with the addition ofβ-nucleating agent.The modified PPR prepared with ternary compound modifier showed the most excellent comprehensive properties.
基金Supported by the National Science and Technology Support Program of China(No.2013BAE02B01)the Special Project on the Integration of Industry,Education and Research of Guangdong Province(No.2013B090500003)the Commissioner Workstation Project of Guangdong Province(No.2014A090906002)
文摘Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.
基金supported by the National Natural Science Foundation of China(No.50527301)
文摘The non-isothermal crystallization of poly（L-lactide） （PLLA） under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy （POM） with a hot shear stage and wide-angle X-ray diffraction （WAXD）. The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity. Under quiescent conditions, the morphology assumes different sized spherulites, and its crystallinity dramatically reduces with increasing the cooling rate. On the other hand, the shear flow increases the onset crystallization temperature, and enhances the final crystallinity. When the shear rate is above 5 s^-1, cylindrite-like crystals are observed, furthermore, their content depends on the cooling rate.
基金Guoxin Sui would like to acknowledge the financial supports of the Hundreds’ Talents Program of Chinese Academy of Sciences.
文摘The non-isothermal crystallization kinetics of polyamide 6/diamine-modified multi-walled carbon nanotube （PA6/D-MWNT） nanocomposite was investigated by differential scanning calorimetry （DSC）. The modified Avrami equation, the Ozawa equation and the combined Avrami/Ozawa equation were employed to analyze the non-isothermal crystallization data. The crystallization activation energies were also evaluated by the Kissinger method. It was found that the combined Avrami/Ozawa equation could successfully describe the non-isothermal crystallization process. The results showed that D-MWNTs not only acted as effective heterogeneous nucleating agents for PA6 and noticeably increased the crystallization temperature of PA6, but also influenced the mechanism of nucleation and crystal growth of PA6 and then reduced the overall crystallization rate of the neat PA6 matrix. The crystallization activation energy for the nanocomposite sample was greater than that of the neat PA6, which indicated that the addition of D-MWNTs hindered the mobility of PA6 chain segments.
文摘The non-isothermal crystallization kinetics of polypropylene （PP）, PP/anhydrite composites were investigated by differential scanning calorimetry （DSC） with various cooling rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the non-isothermal crystallization process of these samples. The difference in the exponent n between PP and PP/anhydrite composites indicated that non-isothermal kinetic crystallization corresponded to tri-dimensional growth with heterogeneous nucleation. The values of half-time, Zc and F（T） showed that the crystallization rate increased with the increasing of cooling rates for PP and PP/anhydrite composites, but the crystallization rate of PP/anhydrite composites was faster than that of PP at a given cooling rate. The method developed by Ozawa did not describe the non-isothermal crystallization process of PP very well. Moreover, the method proposed by Kissinger was used to evaluate the activation energy of the mentioned samples. The result showed that the activation energy of PP/anhydrite was greatly larger than that of PP.
文摘A kinetic equation of non-isothermal crystamzation was derived by extending Avrami's equation to the non-isothermal situation. More crystallization information can be obtained from this kinetic equation. The curves of non-isothermal and isothermal crystallizations were analysed and compared for poly (ethylene terephthalate) (PET), and the results were discussed.
基金Supported by the Graduate Innovative Fund of Wuhan Institute of Technology(CX2013019)
文摘The non-isothermal crystallization kinetics of reactive microgel/nylon 6 blends was investigated by differential scanning calorimetry(DSC). The Mo equation was employed to analyze the non-isothermal crystallization data. The crystallization activation energies were also evaluated by the Kissinger method. The results show that the crystallization onset temperature(T onset) and crystallization peak temperature(T p) decrease with the increase of the content of reactive microgel, while ΔT(T onset–T p), the crystallization half-time(t1/2) and the crystallization enthalpy(ΔH c) increase. The required cooling rates of blends are higher than that of neat nylon6 in order to achieve the same relative crystallinity in a unit of time. The crystallization activation energies of the reactive microgel/nylon 6 blends are greater than those of the neat nylon 6. When the content of reactive microgel is 30%, the relative crystallinity(X t) reaches the maximum.
文摘Fiber-class modified kaolin and PET have been blended in the twin-screw and granulated to chips containing 4 wt% of kaolin.Non-isothermal crystallization process of kaolin modified polyester was investigated using a differential scanning calorimetry （DSC）,and the addition of kaolin enhances either the melting temperature （Tm） or the crystallization temperature （Tc）.The morphology of kaolin modified polyester,the melt of which is cooled at different cooling rate,was observed by scanning electron microscope （SEM）.The relationship between Tc and cooling rate F was studied.Semi-crystalline phase t1/2 makes an exponential decline with increasing F,and the higher the cooling rate,the shorter the time of crystallization completion.Non-isothermal crystallization kinetics parameters and the activation energy were calculated,indicating that the higher rate of cooling needs the higher relative crystallinity in the unit crystallization time,the crystallization rate increased while speeding up the temperature reduction,and the activation energy ΔE was calculated to be-204.1566 kJ/mol for the non-isothermal crystallization processes by the Kissinger＇s methods.
文摘An equation of non-isothermal crystallization kinetics was derived according to a new model and the crystallizations of both the PET samples under solid state polycon-densation and the pre-orientation yarn of high speeding spinning PET were studied with this equation. The results show that there is a good linear relationship between In {-In[1-X(T)]} and lnΦ. The index m in the equation approximately equals to 3 for PET chips and 1. 3 for pre-orientated yarn. At the same temperature, Q(T) decreases with the increase of PET M. W. and the kinetics parameters obtained by Jeziorny' s method indicate that G also decreases with the increase of PET M. W.. Q(T) and Gc show the same varying tendency in the non-isothermal crystallization process.
基金This work was supported by Academia Sinica selected Research Program and National Natural Science Foundation of China
文摘In this paper we have presented the results of acoustic emission (AE) during non-isothemal crystallization of polypropylene (PP) melt with mean cooling rate 4℃/min, and discussed the effects of molecular weight (MW) on AE activity. It is shown that the amount of AE ring-down counts during whole crystallization of PP depends on the MW strongly.The copious AE bursts have been observed at the late stage of PPcrystallization. AE bursts are caused by cracking, crazing and cavitation between spherulites and inside spherulites.
文摘The non-isothermal crystallization kinetics of modified poly(ethylene terephthalate) (PET) with the function of ultraviolet (UV) protection was studied by means of differential scanning calorimetry. The kinetics of the modified polymer under non-isothermal crystallization was analyzed by Ozawa equation. The crystallization behavior of the modified polymer obeyed Ozawa theory. The additives in the polymer whose function was UV-resistant acted as crystal nucleus in the processing of crystallization, which resulted in the increase of Avrami index and the crystallization rate of the cooling system.
文摘The kineties of non-isothermal crystallization of Nylon-1010 has been investigated by using differential scanning calorimetry(DSC), DSC curves were obtained under cooling rate(R): 2. 5, 5, 10, 20, 40K/min. Applying Mandelkern and Ziabicki theories, the values of the Z kinetic parameter and G the kinetic crystalllzab- ility have been determined. Expenents of Avrami obtained in this work decrease with increase of cooling rate and then level off. The experimental results show disagreements with the Ozawa equation.
文摘The non-isothermal crystallization kinetics of poly(ethylene terephthalate) (PET) modified by poly (ethlene glycol) (PEG) were determined by DSC. The dual linear regression method was used to evaluate the relationship between the reciprocal of t 1/2 ( the half life of crystallization) and the appropriate temperature variable. The parameters such as the activation energy (Ed) for transport, the equilibrium melting temperature (T_m^0),the nucleation parameter (ψ),themaximum crystallization temperature (T_(e, max)), and the kinetic crystallizability (G) for the copolyesters were obtained. The influence of the PEG content in PET chains on the parameters characterizing crystallization kinetics and crystallization thermodynamics was discussed.
文摘This work deals with isothermal and non-isothermal crystallization kinetics of electrically conductive polyvinylidene fluoride/poly(ethylene terephthalate) (PVDF/PET) based composites. It completes our previous work in which we related the crystallinity of these conductive PVDF/PET based composites to their through-plane resistivity [1]. Isothermal crystallization was described using the logarithmic form of the Avrami equation and it was observed that the crystallization rate of the PVDF phase inside the composite became slower compared to that of neat PVDF. In non-isothermal crystallization, the Avrami exponent of PVDF phase did not show any noticeable variation;however, that of PET phase, which contains the major part of the conductive carbon black (CB) and graphite (GR) additives, showed an evident decrease compared with neat PET. It was also observed that, at the same cooling rate, the crystallization rate of PVDF and PET phases inside the composite was slower than that of neat PVDF and PET.
基金the National Natural Science Foundation of China (50571052)
文摘The effect of yttrium on the thermal stability and crystallization behavior of Nd-Fe-Al-Ni amorphous alloys was investigated using X-ray diffraction （XRD）, differential scanning calorimeter （DSC）, and transmission electron microscopy （TEM）.The results indicated that the as-cast Nd60Fe20Al10Ni10-xYx（X=-0, 2） amorphous alloys were fabricated with some quenched-in crystals, which could be restrained by Y. With the effect of yttrium, both the crystallization temperature and exothermic peak shifted to higher temperatures, illustrating that the thermal stability could be improved. The addition of Y changed the crystallization process and final crystallization results. Moreover, the crystallites in the amorphous matrix became more homogeneous and smaller. Meanwhile, Y was useful for the passivation of oxygen in chemistry and restrained the negative effect of oxygen. The activation energies of the start of crystallization and peaking were 1.21 and 1.16 eV, respectively, according to the Kissinger equation.
基金Hong Kong RGC Earmarked Research Grants 14305315,CUHK4041/11P and CUHK4048/13PThe Chinese University of Hong Kong,a Croucher Foundation-CAS Joint Grant,and a NSFC/RGC Joint Research Scheme(N-CUHK443/14)
文摘In this article, we prove the global existence of weak solutions to the non- isothermal nematic liquid crystal system on T2, on the basis of a new approximate system which is different from the classical Ginzburg-Landau approximation. Local in space energy inequalities are employed to recover the estimates on the second order spatial derivatives of the director fields locally in time, which cannot be derived from the basic energy balance. It is shown that these weak solutions satisfy the temperature equation, and also the total energy equation but away from at most finite many ＂singular＂ times, at which the energy concentration occurs and the director field losses its second order derivatives.
