Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation f...Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.展开更多
In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for pie...In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for piecewise compensating correction was proposed. According to the mechanical structure of LVDT, the output equation was calculated, and then the theoretic nonlinear source of output was analyzed. By the proposed line-element adaptive segmentation method, the nonlinear output of LVDT was divided into linear and nonlinear regions with a given threshold. Then the com- pensating correction function was designed for nonlinear parts employing polynomial regression tech- nique. The simulation of LVDT validates the feasibility of proposed scheme, and the results of cali- bration and testing experiments fully prove that the proposed method has higher accuracy than the state-of-art correction algorithms.展开更多
Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this...Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this work, we propose a convenient look-up-table-based （LUT-based） method to compensate for the non-linear error in captured fringe patterns. Without extra calibration, this LUT-based method completely utilizes the captured fringe pattern by recording the full-field differences. Then, a phase compensation map is established to revise the measured phase. Experimental results demonstrate that this method works effectively.展开更多
A prompt gamma-neutron activation analysis(PGNAA) system was developed to detect the iron content of iron ore concentrate. Because of the self-absorption effect of gamma-rays and neutrons, and the interference of chlo...A prompt gamma-neutron activation analysis(PGNAA) system was developed to detect the iron content of iron ore concentrate. Because of the self-absorption effect of gamma-rays and neutrons, and the interference of chlorine in the neutron field, the linear relationship between the iron analytical coefficient and total iron content was poor, increasing the error in the quantitative analysis. To solve this problem, gamma-ray self-absorption compensation and a neutron field correction algorithm were proposed, and the experimental results have been corrected using this algorithm. The results show that the linear relationship between the iron analytical coefficient and total iron content was considerably improved after the correction. The linear correlation coefficients reached 0.99 or more.展开更多
This paper reports that the designed optical polarization mode dispersion compensator shows a good performance under the real-time variation of differential group delay, state of polarization and principal state of po...This paper reports that the designed optical polarization mode dispersion compensator shows a good performance under the real-time variation of differential group delay, state of polarization and principal state of polarization in a （40×43）-Gb/s dense-wavelength-multiplexing, 1200-km enhanced return-to-zero differential-quadrature-phase-shift- keying （RZ-DQPSK） system. The polarization mode dispersion tolerance of the system is improved by 26 ps using the optical polarization mode dispersion compensator. The short and long time stabilities are tested with the bit error ratio recorded.展开更多
Conformal radiation therapy methods including the magnetic raster scanning used at GSI yield a very high dose inside tumor volume while drastically reducing the dose contribution to surrounding healthy tissue.This is ...Conformal radiation therapy methods including the magnetic raster scanning used at GSI yield a very high dose inside tumor volume while drastically reducing the dose contribution to surrounding healthy tissue.This is achieved by delivering a previously calculated dose to every single volume element(voxel)of the tumor展开更多
Being directed against two kinds of noise in optical fiber sensors,a simple and effective method of automatic compensation for optical fiber sensors is presented.Not only the unstability effect of light source,but als...Being directed against two kinds of noise in optical fiber sensors,a simple and effective method of automatic compensation for optical fiber sensors is presented.Not only the unstability effect of light source,but also zero drift of photoelectronic devices,can be eliminated or enormously restrained with the aid of this method.In another way,by using single-chip microcomputer,the optical fiber sensor system fabricated is connected to a computer network to realize an automatic compensation.展开更多
为提高静止无功补偿器(static var compensator,SVC)应对直流电弧炉等冲击性负载的闪变抑制性能,文中在改进Takagi-Sugeno(TS)模糊算法的基础上,提出一种SVC滚动预测控制方法。首先,建立直流电弧炉电气模型并仿真分析其无功特性;然后,...为提高静止无功补偿器(static var compensator,SVC)应对直流电弧炉等冲击性负载的闪变抑制性能,文中在改进Takagi-Sugeno(TS)模糊算法的基础上,提出一种SVC滚动预测控制方法。首先,建立直流电弧炉电气模型并仿真分析其无功特性;然后,针对经典TS模糊预测算法应用于波动负荷时出现的输出异常置0情况,提出一种范围自适应修正的改进方法,该方法能消除一类算法应用机理导致的异常值,从而提高TS模糊算法对波动负荷无功功率预测的可靠性和准确性;最后,基于模型训练时间约束,建立无功功率半周期滚动预测控制模型,提前10 ms预测无功功率,改善了SVC传统控制系统响应的滞后特性。仿真结果表明,相比于SVC传统控制方法,所提方法的平均闪变改善率提高了54.17%,验证了所提方法对闪变现象的抑制效果提升显著。展开更多
A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some su...A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some sub ranges.At different temperature sub ranges the bandgap reference can be compensated by different linear functions.Since the temperature sub range is much narrower than the whole range,the compensation error can be reduced significantly.Theoretically,the precision can be improved unlimitedly if the sub ranges are narrow enough.In the given example,with only three temperature sub ranges,the temperature coefficient of a conventional bandgap reference drops from 1 5×10 -5 /℃ to 2×10 -6 /℃ over the -40℃ to 120℃ temperature range.展开更多
When the electronic temperature sensor was incorporated into a system of soil water tension and the insidetube temperature was monitored in real time, it is concluded that the inside temperature increased by 26.9 ℃ a...When the electronic temperature sensor was incorporated into a system of soil water tension and the insidetube temperature was monitored in real time, it is concluded that the inside temperature increased by 26.9 ℃ and the inside pressure changed about 14.6 Kpa, when the pottery soil was replaced by the sealing plug. When the soil water was relatively stable in the experimental salvers, the in-side pressure stil varied regularly with the temperature. When the inside temperature increased by 22.2 ℃, the inside pressure varied about 7.4 Kpa. Through com-pensation calculation of the inside tension, the temperature in the warming and cooling periods was compensated, which was useful to correct the tension measurement errors induced from the changing temperature. When the measuring interval was 4 hours and the temperature difference was 18.1 ℃, the tension difference of both points was only 0.278 Kpa, compared to the difference up to 6.5 Kpa before compensation.展开更多
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.N120407007)
文摘Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.
基金Supported by National High Technology Research and Development Program of China("863" Program)(2011AA041002)
文摘In order to solve the linear variable differential transformer （LVDT） displacement sensor nonlinearity of overall range and extend its working range, a novel line-element based adaptively seg- menting method for piecewise compensating correction was proposed. According to the mechanical structure of LVDT, the output equation was calculated, and then the theoretic nonlinear source of output was analyzed. By the proposed line-element adaptive segmentation method, the nonlinear output of LVDT was divided into linear and nonlinear regions with a given threshold. Then the com- pensating correction function was designed for nonlinear parts employing polynomial regression tech- nique. The simulation of LVDT validates the feasibility of proposed scheme, and the results of cali- bration and testing experiments fully prove that the proposed method has higher accuracy than the state-of-art correction algorithms.
基金the financial support provided by the National Natural Science Foundation of China(11472267 and 11372182)the National Basic Research Program of China(2012CB937504)
文摘Although the structured light system that uses digital fringe projection has been widely implemented in three-dimensional surface profile measurement, the measurement system is susceptible to non-linear error. In this work, we propose a convenient look-up-table-based （LUT-based） method to compensate for the non-linear error in captured fringe patterns. Without extra calibration, this LUT-based method completely utilizes the captured fringe pattern by recording the full-field differences. Then, a phase compensation map is established to revise the measured phase. Experimental results demonstrate that this method works effectively.
基金supported by the National Key Scientific Instrument and Equipment Development Projects(No.2012YQ240121)Liaoning science and technology project(No.2017220010)Changchun Science and Technology Bureau Local Company and College(University,Institution)Cooperation Projects(No.17DY023)
文摘A prompt gamma-neutron activation analysis(PGNAA) system was developed to detect the iron content of iron ore concentrate. Because of the self-absorption effect of gamma-rays and neutrons, and the interference of chlorine in the neutron field, the linear relationship between the iron analytical coefficient and total iron content was poor, increasing the error in the quantitative analysis. To solve this problem, gamma-ray self-absorption compensation and a neutron field correction algorithm were proposed, and the experimental results have been corrected using this algorithm. The results show that the linear relationship between the iron analytical coefficient and total iron content was considerably improved after the correction. The linear correlation coefficients reached 0.99 or more.
基金Project supported by the Huawei Technology Project (Grant No.YBON2008014)the National "863" High Technology Projects (Grant No.2009AA01Z224)
文摘This paper reports that the designed optical polarization mode dispersion compensator shows a good performance under the real-time variation of differential group delay, state of polarization and principal state of polarization in a （40×43）-Gb/s dense-wavelength-multiplexing, 1200-km enhanced return-to-zero differential-quadrature-phase-shift- keying （RZ-DQPSK） system. The polarization mode dispersion tolerance of the system is improved by 26 ps using the optical polarization mode dispersion compensator. The short and long time stabilities are tested with the bit error ratio recorded.
文摘Conformal radiation therapy methods including the magnetic raster scanning used at GSI yield a very high dose inside tumor volume while drastically reducing the dose contribution to surrounding healthy tissue.This is achieved by delivering a previously calculated dose to every single volume element(voxel)of the tumor
文摘Being directed against two kinds of noise in optical fiber sensors,a simple and effective method of automatic compensation for optical fiber sensors is presented.Not only the unstability effect of light source,but also zero drift of photoelectronic devices,can be eliminated or enormously restrained with the aid of this method.In another way,by using single-chip microcomputer,the optical fiber sensor system fabricated is connected to a computer network to realize an automatic compensation.
文摘为提高静止无功补偿器(static var compensator,SVC)应对直流电弧炉等冲击性负载的闪变抑制性能,文中在改进Takagi-Sugeno(TS)模糊算法的基础上,提出一种SVC滚动预测控制方法。首先,建立直流电弧炉电气模型并仿真分析其无功特性;然后,针对经典TS模糊预测算法应用于波动负荷时出现的输出异常置0情况,提出一种范围自适应修正的改进方法,该方法能消除一类算法应用机理导致的异常值,从而提高TS模糊算法对波动负荷无功功率预测的可靠性和准确性;最后,基于模型训练时间约束,建立无功功率半周期滚动预测控制模型,提前10 ms预测无功功率,改善了SVC传统控制系统响应的滞后特性。仿真结果表明,相比于SVC传统控制方法,所提方法的平均闪变改善率提高了54.17%,验证了所提方法对闪变现象的抑制效果提升显著。
文摘A bandgap voltage reference is presented with a piecewise linear compensating circuit in order to reduce the temperature coefficient.The basic principle is to divide the whole operating temperature range into some sub ranges.At different temperature sub ranges the bandgap reference can be compensated by different linear functions.Since the temperature sub range is much narrower than the whole range,the compensation error can be reduced significantly.Theoretically,the precision can be improved unlimitedly if the sub ranges are narrow enough.In the given example,with only three temperature sub ranges,the temperature coefficient of a conventional bandgap reference drops from 1 5×10 -5 /℃ to 2×10 -6 /℃ over the -40℃ to 120℃ temperature range.
基金Supported by Jiangsu Agricultural Self-innovation Fund[CX(13)3031]~~
文摘When the electronic temperature sensor was incorporated into a system of soil water tension and the insidetube temperature was monitored in real time, it is concluded that the inside temperature increased by 26.9 ℃ and the inside pressure changed about 14.6 Kpa, when the pottery soil was replaced by the sealing plug. When the soil water was relatively stable in the experimental salvers, the in-side pressure stil varied regularly with the temperature. When the inside temperature increased by 22.2 ℃, the inside pressure varied about 7.4 Kpa. Through com-pensation calculation of the inside tension, the temperature in the warming and cooling periods was compensated, which was useful to correct the tension measurement errors induced from the changing temperature. When the measuring interval was 4 hours and the temperature difference was 18.1 ℃, the tension difference of both points was only 0.278 Kpa, compared to the difference up to 6.5 Kpa before compensation.
