Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of bette...Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically展开更多
This paper numerically evaluates the effect of the crack position on the ultimate strength of stiffened panels.Imperfections such as notches and cracks in aged marine stiffened panels can reduce their ultimate strengt...This paper numerically evaluates the effect of the crack position on the ultimate strength of stiffened panels.Imperfections such as notches and cracks in aged marine stiffened panels can reduce their ultimate strength.To investigate the effect of crack length and position,a series of nonlinear finite element analyses were carried out and two cases were considered,i.e.,case 1 with thin stiffeners and case 2 with thick stiffeners.In both cases,the stiffeners have the same cross-section area.To have a basis for comparison,the intact panels were modeled as well.The cracks and notches were in the longitudinal and transverse direction and were assumed to be in the middle part of the panel.The cracks and notches were assumed to be through the thickness and there is neither crack propagation nor contact between crack faces.Based on the numerical results,longitudinal cracks affect the behavior of the stiffened panels in the postbuckling region.When the stiffeners are thinner,they buckle first and provide no reserved strength after plate buckling.Thus,cracks in the stiffeners do not affect the ultimate strength in the case of the thinner stiffeners.Generally,when stiffeners are thicker,they affect the postbuckling behavior more.In that case,cracks in the stiffeners affect the buckling and failure modes of the stiffened panels.The effect of notch was also studied.In contrast to the longitudinal crack in stiffeners,a notch in the stiffeners reduces the ultimate strength of the stiffened panel for both slender and thick stiffeners.展开更多
The cross-flow(CF)vortex-induced vibration(VIV)of a deepwater steep wave riser(SWR)subjected to uniform or shear flow loads is investigated numerically.The model is based on a three-dimensional(3D)nonlinear elastic ro...The cross-flow(CF)vortex-induced vibration(VIV)of a deepwater steep wave riser(SWR)subjected to uniform or shear flow loads is investigated numerically.The model is based on a three-dimensional(3D)nonlinear elastic rod theory coupled with a wake oscillator model.In this numerical simulation,the nonlinear motion equations of the riser with large deformation features are established in a global coordinate system to avoid the transformation between global and local coordinate systems,and are discretized with the time-domain finite element method(FEM).A wakeoscillator model is employed to study the vortex shedding,and the lift force generated by the wake flow is described in a van der Pol equation.A Newmark-βiterative scheme is used to solve their coupling equation for the VIV response of the SWR.The developed model is validated against the existing experimental results for the VIV response of the top-tension riser(TTR).Then,the numerical simulations are executed to determine VIV characteristics of the SWR.The effects of both flow velocity and the spanwise length of the flow field on the drag coefficient in the inline(IL)direction and the lift coefficient in the CF direction are investigated systematically.The results indicate that compared with TTR,the low frequency and multi-modal vibration are the main components of the SWR due to the large deformation and flexible characteristics.For shear flow,the multi-frequency resonance dominates the VIV response of the SWR,especially at the hang-off segment.展开更多
To further the study on the newly developed portal water injection sheet pile under static loads, in this paper, by adopting the nonlinear calculation module of FEM software ANSYS, a model for the interaction between ...To further the study on the newly developed portal water injection sheet pile under static loads, in this paper, by adopting the nonlinear calculation module of FEM software ANSYS, a model for the interaction between the soil and the sheet piles is set up, and the seismic response analysis for this type of space-retaining structure is performed. The effects of the embedded depth and the distance between the front pile and the back pile on the dynamic characteristics of the portal water injection sheet pile are studied.展开更多
Combined with the actual project,this paper carries out a nonlinear finite element analysis on 2 groups,6 short-limbed shear walls,through the finite element calculation software ANSYS.The stress-strain relation of th...Combined with the actual project,this paper carries out a nonlinear finite element analysis on 2 groups,6 short-limbed shear walls,through the finite element calculation software ANSYS.The stress-strain relation of the models,and the effects of the type of sections and the axial compression ratios on the models can be obtained,providing a reference for future design.展开更多
This work presents a nonlinear finite element method to simulate the macroscopic mechanical responses and the effects of martensite plasticity in a shape memory alloy(SMA)structure.A linear relationship formulation is...This work presents a nonlinear finite element method to simulate the macroscopic mechanical responses and the effects of martensite plasticity in a shape memory alloy(SMA)structure.A linear relationship formulation is adopted to express the influence of martensite plasticity on the inverse martensitic phase transition of SMA material.Incorporating with a trigonometric-type phase transition evolution law and an exponential-type plastic flow evolution law,an incremental mechanical model with two internal variables is supposed based on the macroscopic experimental phenomena.A nonlinear finite element equation is formulated and solved by the principle of virtual displacement and Newton-Raphson method respectively.By employing the proposed nonlinear finite element method,the uniform tensile bar and three-point bending beam are simulated and analyzed.Results illustrate that the presented nonlinear finite element method is suitable to act as an effective computational tool for the wide applications based on the SMA material considering the effects of martensite plasticity because all material constants related to the method can be obtained from macroscopic experiments.展开更多
A kind of concrete-filled lattice rectangular steel tube(CFLRST)column was put forward.The numerical simulation was modeled to analyze the mechanical characteristic of CFLRST column.By comparing the load-deformation c...A kind of concrete-filled lattice rectangular steel tube(CFLRST)column was put forward.The numerical simulation was modeled to analyze the mechanical characteristic of CFLRST column.By comparing the load-deformation curves from the test results,the rationality and reliability of the finite element model has been confirmed,moreover,the change of the section stiffness and stress in the forcing process and the ultimate bearing capacity of the column were analyzed.Based on the model,the comparison of ultimate bearing capacity and ductility between CFLRST column and reinforced concrete(RC)column were also analyzed.The results of the finite element analysis show that the loading process of CFLRST column consists of elastic stage,yield stage and failure stage.The failure modes are mainly strength failure and failure of elastoplastic instability.CFLRST column has higher bearing capacities in comparison with reinforced concrete columns with the same steel ratio.In addition,the stiffness degeneration of CFLRST column is slower than RC column and CFLRST column has good ductility.展开更多
Because the applications of single-anchor leg mooring yoke systems(SYSs)are rarely studied in the offshore industry,the design of such systems features some uncertainties.This paper investigated the effect of eccentri...Because the applications of single-anchor leg mooring yoke systems(SYSs)are rarely studied in the offshore industry,the design of such systems features some uncertainties.This paper investigated the effect of eccentricity on the wear of the topside axial bearing of a SYS.The eccentricity of the topside was verified by on-site inspection,and the axial bearing wear was found to be far more serious than the original design.The contact status between the axial bearing and flange surface was studied on the basis of the actual topside load by using nonlinear finite element analysis.Wear tests of the topside bearing under uniform and eccentric loads were also performed to study the effect of eccentric loads on the wear rate.The key parameters obtained from numerical simulations and experimentation were used to calculate the wear depth via a simplified linear wear model based on the product of the pressure and sliding distance.Results showed that eccentric loads are the main factor responsible for the excessive wear of topside axial bearings.展开更多
This paper investigates the performance of T-stub connected semi-rigid joint of rectangular tubular columns and H-shaped steel beams.The finite element analysis software ABAQUS is used to analyze the nonlinear perform...This paper investigates the performance of T-stub connected semi-rigid joint of rectangular tubular columns and H-shaped steel beams.The finite element analysis software ABAQUS is used to analyze the nonlinear performance of the joint under monotonic loading.Meanwhile,the dimensions of T-stub,column and beam are considered as analytic parameters to discuss the performance of the joint.The analysis shows that the thickness and the length of T-stub webs,the height of beam section,bolt diameter,shear connector and the preloaded force affect the performance of the joint largely,and the thickness of the steel tube,the thickness and length of T-stub flange,bolt spacing have relatively little influences on the performance of the joint.The research results indicate that this joint is semi-rigid joint.展开更多
The purpose of this study was to build a flexible mechanical system with a hydrostatic skeleton.The main components of this system are two type flexible bags.One is a structural bag with constant inner pressure.The ot...The purpose of this study was to build a flexible mechanical system with a hydrostatic skeleton.The main components of this system are two type flexible bags.One is a structural bag with constant inner pressure.The other is an actuator bag with controlled inner pressure.To design the system,it was necessary to estimate both structural deformation and driving force.Numerical analysis of flexible bags,however,is difficult because of large nonlinear deformation.This study analyzed structural strength and driving force of flexible bags with the nonlinear finite element analysis (FEA) software ABAQUS.The stress concentration dependency on the bag shape is described and the driving force is calculated to include the large deformation.From the analytical results,this study derives an empirical equation of driving force.The validity of the equation was confirmed by condition-changed analyses and experimental results.展开更多
基金supported by The HongKong Polytechnic University Research Grants(No.1-BB81)grants from National Natural Science Foundation of China,Nos.10872078 and 10832012
文摘Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically
文摘This paper numerically evaluates the effect of the crack position on the ultimate strength of stiffened panels.Imperfections such as notches and cracks in aged marine stiffened panels can reduce their ultimate strength.To investigate the effect of crack length and position,a series of nonlinear finite element analyses were carried out and two cases were considered,i.e.,case 1 with thin stiffeners and case 2 with thick stiffeners.In both cases,the stiffeners have the same cross-section area.To have a basis for comparison,the intact panels were modeled as well.The cracks and notches were in the longitudinal and transverse direction and were assumed to be in the middle part of the panel.The cracks and notches were assumed to be through the thickness and there is neither crack propagation nor contact between crack faces.Based on the numerical results,longitudinal cracks affect the behavior of the stiffened panels in the postbuckling region.When the stiffeners are thinner,they buckle first and provide no reserved strength after plate buckling.Thus,cracks in the stiffeners do not affect the ultimate strength in the case of the thinner stiffeners.Generally,when stiffeners are thicker,they affect the postbuckling behavior more.In that case,cracks in the stiffeners affect the buckling and failure modes of the stiffened panels.The effect of notch was also studied.In contrast to the longitudinal crack in stiffeners,a notch in the stiffeners reduces the ultimate strength of the stiffened panel for both slender and thick stiffeners.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52111530137 and 52025112)the Natural Science Found of Jiangsu Province(Grant No.BK20160556)the Jiangsu Provincial Higher Education Natural Science Research Major Project(Grant No.18KJA580003)。
文摘The cross-flow(CF)vortex-induced vibration(VIV)of a deepwater steep wave riser(SWR)subjected to uniform or shear flow loads is investigated numerically.The model is based on a three-dimensional(3D)nonlinear elastic rod theory coupled with a wake oscillator model.In this numerical simulation,the nonlinear motion equations of the riser with large deformation features are established in a global coordinate system to avoid the transformation between global and local coordinate systems,and are discretized with the time-domain finite element method(FEM).A wakeoscillator model is employed to study the vortex shedding,and the lift force generated by the wake flow is described in a van der Pol equation.A Newmark-βiterative scheme is used to solve their coupling equation for the VIV response of the SWR.The developed model is validated against the existing experimental results for the VIV response of the top-tension riser(TTR).Then,the numerical simulations are executed to determine VIV characteristics of the SWR.The effects of both flow velocity and the spanwise length of the flow field on the drag coefficient in the inline(IL)direction and the lift coefficient in the CF direction are investigated systematically.The results indicate that compared with TTR,the low frequency and multi-modal vibration are the main components of the SWR due to the large deformation and flexible characteristics.For shear flow,the multi-frequency resonance dominates the VIV response of the SWR,especially at the hang-off segment.
文摘To further the study on the newly developed portal water injection sheet pile under static loads, in this paper, by adopting the nonlinear calculation module of FEM software ANSYS, a model for the interaction between the soil and the sheet piles is set up, and the seismic response analysis for this type of space-retaining structure is performed. The effects of the embedded depth and the distance between the front pile and the back pile on the dynamic characteristics of the portal water injection sheet pile are studied.
文摘Combined with the actual project,this paper carries out a nonlinear finite element analysis on 2 groups,6 short-limbed shear walls,through the finite element calculation software ANSYS.The stress-strain relation of the models,and the effects of the type of sections and the axial compression ratios on the models can be obtained,providing a reference for future design.
基金the National Key Research and Development Program of China(No.2017YFC0307604)。
文摘This work presents a nonlinear finite element method to simulate the macroscopic mechanical responses and the effects of martensite plasticity in a shape memory alloy(SMA)structure.A linear relationship formulation is adopted to express the influence of martensite plasticity on the inverse martensitic phase transition of SMA material.Incorporating with a trigonometric-type phase transition evolution law and an exponential-type plastic flow evolution law,an incremental mechanical model with two internal variables is supposed based on the macroscopic experimental phenomena.A nonlinear finite element equation is formulated and solved by the principle of virtual displacement and Newton-Raphson method respectively.By employing the proposed nonlinear finite element method,the uniform tensile bar and three-point bending beam are simulated and analyzed.Results illustrate that the presented nonlinear finite element method is suitable to act as an effective computational tool for the wide applications based on the SMA material considering the effects of martensite plasticity because all material constants related to the method can be obtained from macroscopic experiments.
基金This work was financially supported by the Fundamental Research Funds for the Central Universities(JUSRP11819),National Natural Science Foundation of China through Grant 51378240,2015 Jiangsu provincial building energy saving and construction industry science and technology project,2016 Jiangsu provincial construction industry modernization base project.
文摘A kind of concrete-filled lattice rectangular steel tube(CFLRST)column was put forward.The numerical simulation was modeled to analyze the mechanical characteristic of CFLRST column.By comparing the load-deformation curves from the test results,the rationality and reliability of the finite element model has been confirmed,moreover,the change of the section stiffness and stress in the forcing process and the ultimate bearing capacity of the column were analyzed.Based on the model,the comparison of ultimate bearing capacity and ductility between CFLRST column and reinforced concrete(RC)column were also analyzed.The results of the finite element analysis show that the loading process of CFLRST column consists of elastic stage,yield stage and failure stage.The failure modes are mainly strength failure and failure of elastoplastic instability.CFLRST column has higher bearing capacities in comparison with reinforced concrete columns with the same steel ratio.In addition,the stiffness degeneration of CFLRST column is slower than RC column and CFLRST column has good ductility.
基金supported by the Project of China Offshore Oil Engineering Company(Tianjin)CCL2014CFD。
文摘Because the applications of single-anchor leg mooring yoke systems(SYSs)are rarely studied in the offshore industry,the design of such systems features some uncertainties.This paper investigated the effect of eccentricity on the wear of the topside axial bearing of a SYS.The eccentricity of the topside was verified by on-site inspection,and the axial bearing wear was found to be far more serious than the original design.The contact status between the axial bearing and flange surface was studied on the basis of the actual topside load by using nonlinear finite element analysis.Wear tests of the topside bearing under uniform and eccentric loads were also performed to study the effect of eccentric loads on the wear rate.The key parameters obtained from numerical simulations and experimentation were used to calculate the wear depth via a simplified linear wear model based on the product of the pressure and sliding distance.Results showed that eccentric loads are the main factor responsible for the excessive wear of topside axial bearings.
基金This project was supported by Shenyang Technology Development Program(F11-166-9-00)Liaoning Key Laboratory Program(LS2010134)+1 种基金Liaoning Bai Qian Wan Talents Program(2009921095)Technology Program of Ministry of Housing and Urban-Rural Development(2011-k3-23).
文摘This paper investigates the performance of T-stub connected semi-rigid joint of rectangular tubular columns and H-shaped steel beams.The finite element analysis software ABAQUS is used to analyze the nonlinear performance of the joint under monotonic loading.Meanwhile,the dimensions of T-stub,column and beam are considered as analytic parameters to discuss the performance of the joint.The analysis shows that the thickness and the length of T-stub webs,the height of beam section,bolt diameter,shear connector and the preloaded force affect the performance of the joint largely,and the thickness of the steel tube,the thickness and length of T-stub flange,bolt spacing have relatively little influences on the performance of the joint.The research results indicate that this joint is semi-rigid joint.
文摘The purpose of this study was to build a flexible mechanical system with a hydrostatic skeleton.The main components of this system are two type flexible bags.One is a structural bag with constant inner pressure.The other is an actuator bag with controlled inner pressure.To design the system,it was necessary to estimate both structural deformation and driving force.Numerical analysis of flexible bags,however,is difficult because of large nonlinear deformation.This study analyzed structural strength and driving force of flexible bags with the nonlinear finite element analysis (FEA) software ABAQUS.The stress concentration dependency on the bag shape is described and the driving force is calculated to include the large deformation.From the analytical results,this study derives an empirical equation of driving force.The validity of the equation was confirmed by condition-changed analyses and experimental results.