Research Problem: In Abu Dhabi, limited implementation of OSH Regulations contributes to the general unawareness among employees and workers about occupational hazards and safety measures, resulting in slow responsive...Research Problem: In Abu Dhabi, limited implementation of OSH Regulations contributes to the general unawareness among employees and workers about occupational hazards and safety measures, resulting in slow responsiveness toward enforcement measures and a lack of self-regulatory approaches within companies. Purpose: The purpose of this study is to examine the implementation methods practised in Abu Dhabi with those in developed countries with established OSH regulatory bodies. Methodology: Qualitative and quantitative research methods were employed to gather primary research data. Workers from various industries in Abu Dhabi were sampled on purpose and asked to respond to questionnaires and interviews on OSH protocol awareness and implementation, and circumstances of workplace incidence. Results: The findings of this study showed that the enforcement of OSH requirements in UAE positively correlated to a reduction in the rate of work-related injury and improved business performance. The quantitative research data showed that the energy sector had the highest score (15) while the tourism sector had the lowest score (5.3) in occupational health systems and improvements in business efficiency and productivity. Implications: The outcomes of this study shed light on the importance of implementing OSH Guidelines for companies to empower their safety managers to fully enforce OSH requirements in their organisations. In conclusion, effective OSH enforcement requires cooperation between general workers and OSH managers and facilitation from business owners.展开更多
INTRODUCTION Occupational safety and health (OSH) is generally the anticipation, recognition, evaluation, and control of hazards arising in or from the workplace. The study sought to assess and evaluate occupational h...INTRODUCTION Occupational safety and health (OSH) is generally the anticipation, recognition, evaluation, and control of hazards arising in or from the workplace. The study sought to assess and evaluate occupational health and safety hazards experienced among health workers in the Bono region of Ghana. METHODOLOGY The study was descriptive cross-sectional quantitative study. Data was from two hundred (200) health workers and was analyzed using the binary logistic regression analysis. RESULTS The findings from the study show that risk factors associated with biological hazards were clinical staff [OR = 2.487 (1.146 - 5.397), p = 0.021], poor maintenance of hospital items [OR = 0.446 (0.240 - 0.831), p = 0.011], assault (verbal) abuse [OR = 2.581 (1.317 - 5.059), p = 0.006] and extreme pressure from work [OR = 2.975 (1.519 - 5.829), p = 0.001]. Non-biological hazards were associated with being single [OR = 0.499 (0.263 - 0.947), p = 0.034], being verbally assaulted [OR = 3.581 (1.865 - 6.876), p CONCLUSION Risk factors related with biological hazards include poor maintenance of hospital items and extreme pressure from work whereas non-biological hazards were associated with being single, being verbally assaulted. Clinical healthcare providers are more vulnerable to occupational health and safety hazards. The study recommends the provision of strategic policies to promote and protect the workers’ health based on the development of the epidemiological profile of health, needs to be readjusted and strengthened.展开更多
An Environmental Impact Assessment(EIA)was conducted for 2×150 MW Floating Photovoltaic(FPV)plants,based on the World Bank’s new Environmental and Social Framework(ESF).The project was the first of its kind fina...An Environmental Impact Assessment(EIA)was conducted for 2×150 MW Floating Photovoltaic(FPV)plants,based on the World Bank’s new Environmental and Social Framework(ESF).The project was the first of its kind financed by the World Bank in Pakistan and was geared towards renewable energy development in the country.Key components of the project included the installation of high-density polyethylene floats,Photovoltaic(PV)panels,underwater transmission cables to floating or shoreline inverters and transformers,and overhead transmission lines to existing or new substations.The EIA was commissioned to identify all environmental,health,and safety challenges associated with the construction and operation of the FPV plants.A risk screening criterion based on the World Bank ESF was employed to identify these challenges,while a mitigation hierarchy and hierarchy of control were used in providing measures to address these challenges.The environmental challenges identified were pollution of surface water and degradation of aquatic habitat from bird droppings on the floating panels;changes to the thermal structure and evaporation rate of the water body as a result of decreased sunlight access;direct impacts of shading on fish and aquatic algae;impacts on migratory birds and their habitats;and impacts on fish movements due to the anchoring and cabling of the floats.Likewise,the project-specific occupational health and safety challenges identified were the risk of falling and drowning in the water during the installation and maintenance of the panels over the water.Mitigation measures were provided for the identified challenges.In conclusion,the construction and operation of FPV plants have environmental,health,and safety issues.It is therefore recommended that the mitigation measures provided should be incorporated into the earlier stages of the design and operation of future similar FPV plants around the world.展开更多
Insertion of Sustainable Development Goals (SDGs) into higher education is an important concern. This article aims to address the influences of SDGs in higher and engineering educational system in Egypt. The present s...Insertion of Sustainable Development Goals (SDGs) into higher education is an important concern. This article aims to address the influences of SDGs in higher and engineering educational system in Egypt. The present study focuses on SDGs 3, 4, 6, 7, 9, and 11. SDG 3 is related to occupational health and SDG 4 is related to higher education development. However, SDGs 6, 7, 9, and 11 are related to both mechanical and environmental engineering, and occupational safety. The study approach involves case risk analysis, investigations, and review for design concepts of occupational health and safety before and after the Coronavirus disease (COVID-19). A number of cross-sectional studies that constitute 125 multidisciplinary research plans (MDRPs) are grouped to monitor and evaluate two main factors which are an influence of involving SDGs into engineering education and selected curriculum of occupational health and safety. Then the results of these research-based studies, which performed over four academic years started from 2017 up to date 2021, are depicted and discussed. These results reveal the importance of interlink between engineering education and the intended SDGs. The latest 25 MDRPs demonstrate that Egypt response to alleviate the COVID-19 is rapidly pronounced specially on SDGs 3 and 4 simultaneously. However, those MDRPs show that neither record impacts nor delays on SDGs 6, 7, 9 and 11. The conclusions prioritize both the advanced educational mechanisms and verify the engineering curriculums to raise awareness of SDGs among both staff members and students in Egyptian universities. Finally, future work is recommended at the end of this article to focus on each specific goal to gain deep insight to state of the art for each SDG around globe using education development.展开更多
A method system was put forward based on the occupational health and safety management system to develop the dynamic safety management of coal mine. It aimed at the problems in the mining safety management and was put...A method system was put forward based on the occupational health and safety management system to develop the dynamic safety management of coal mine. It aimed at the problems in the mining safety management and was put in practice in Lingxin coal mine of Ningxia Coal Industry Group Co., Ltd.. And good effect was obtained in safety work. It developed the mining dynamic safety management based on the building of occupational health and safety management system of mining enterprise and its main contents are as follows： timely identification and dynamic control of accident risk, persistent improvement of safety management performance according to the ＂PDCA＂ circle.展开更多
Introduction/Objectives: As Tattoo is being more accepted, more professionals dedicate to it. A study was designed with the aim of analysing the perception of Tattoo Artists regarding their Occupational Health/Safety ...Introduction/Objectives: As Tattoo is being more accepted, more professionals dedicate to it. A study was designed with the aim of analysing the perception of Tattoo Artists regarding their Occupational Health/Safety team (opinion about the support provided);as to find out what type accidents, symptoms and occupational diseases they have, in order to provide a better service. Methods: This is a mixed exploratory study, containing a quantitative observational (analytical, cross-sectional) and a qualitative component (Case Study). For the statistical analysis, predominantly non-parametric tests were used. The project was approved by the Ethics Committee and informed consent was obtained. Results: In terms of symptomatology/illnesses, musculoskeletal pathology is the most reported. In terms of accidents, cuts stand out. Several statistically significant relationships were found between the variables analysed. Discussion/Conclusions: The Occupational Health and Security services are considered insufficient by most of the Tattoo artists. It would be desirable that the Occupational Doctor has concrete knowledge regarding Tattooing, in particular semiology/pathology;makes recommendations in pharmacology and/or indicates which exams could be useful. In relation to the Safety Technician, it would be desirable also to have specific knowledge about the sector, making plausible suggestions for improvement.展开更多
Nowadays,sustainability is one of the most important construction sector goals,as it is in most other sectors.However,sustainability in the construction sector is dealt mostly with its environmental and economic dimen...Nowadays,sustainability is one of the most important construction sector goals,as it is in most other sectors.However,sustainability in the construction sector is dealt mostly with its environmental and economic dimensions,and its social dimension remains in the background.This situation causes the Occupational Health and Safety(OHS),which is perhaps the most important issue within the scope of social sustainability,to be addressed on its own,and its relationship with sustainability to be not introduced clearly.This study discussed the relationship between social sustainability and OHS in the construction sector.Based on the fact that in construction projects,the sustainability goal should be revealed forward to a great extent at the design stage,how to contribute to OHS by budgeting OHS activities together with project activities was explained.We intended to contribute to the provision of OHS and thus the social sustainability of construction projects by revealing how the budgeting will be done and how much OHS budget will be,by referring to the studies in the literature conducted about OHS budgeting and presented robust numerical data.The study is expected to help construction sector stakeholders to understand the relationship between social sustainability and OHS and to provide a clear picture of the role of budgeting in this respect.展开更多
The daily operations in the mining industry are still a significant source of risk with regard to occupational safety and health(OS & H). Various research studies and statistical data world-wide show that the numb...The daily operations in the mining industry are still a significant source of risk with regard to occupational safety and health(OS & H). Various research studies and statistical data world-wide show that the number of serious injuries and fatalities still remains high despite substantial efforts the industry has put in recent years in decreasing those numbers. This paper argues that the next level of safety performance will have to consider a transition from coping solely with workplace dangers, to a more systemic model taking organizational risks in consideration. In this aspect, lessons learned from the nuclear industry may be useful, as organizational learning processes are believed to be more universal than the technologies in which they are used. With the notable exception of major accidents, organizational performance has not received all the attention it deserves. A key element for reaching the next level of performance is to include organizational factors in low level events analyses, and approach the management as a risk control system. These factors will then appear not only in the event analysis,but in supervision activities, audits, change management and the like. Many recent event analyses across various industries have shown that organizational factors play a key role in creating conditions for triggering major accidents(aviation, railway transportation, nuclear industry, oil exploitation, mining, etc.).In this paper, a perspective that may be used in supervisory activities, self-assessments and minor events investigations, is presented. When ingrained in an organizational culture, such perspective has the highest potential for continuous safety improvement.展开更多
This paper aims to develop a novel knowledge management framework for improving the system of pro-safety attitudes among young worker population in Poland. This is done through an efficient use of existing sources of ...This paper aims to develop a novel knowledge management framework for improving the system of pro-safety attitudes among young worker population in Poland. This is done through an efficient use of existing sources of explicit and tacit knowledge in the field of vocational occupational safety and health （OSH） training. This project identifies three specific research steps for the development of the knowledge management framework of the information technology-based approach for improving occupational safety training of young workers, including： （1） the development of the conceptual model of the flow of explicit knowledge of OSH; （2） evaluation of the effectiveness of formal and explicit knowledge sources for OSH and training methods using these sources in the context of attitudes towards health and safety at work; and （3） verification of the proposed model of vocational training with the use of combined explicit and hidden knowledge. The proposed framework includes consideration of the effectiveness of the formal and informal sources of safety knowledge. A mapping from the formal sources of explicit knowledge about the occupational safety to expected attitudes （hidden knowledge） towards OSH outcomes, including emotional, cognitive, and behavioral aspects has been used. The above framework should help to improve the system of vocational training for young workers in Poland.展开更多
Introduction: Bangladesh has experienced remarkable growth in RMG over the past 25 years. With the knitwear industry providing more than 4 million direct jobs, providing better occupational health and safety of worker...Introduction: Bangladesh has experienced remarkable growth in RMG over the past 25 years. With the knitwear industry providing more than 4 million direct jobs, providing better occupational health and safety of workers remains a challenge. Aim of the study: The aim of the study was to analyze the disease burden of a RMG factory, and to highlight occupational health risks. Methods: A cross-sectional study design was employed for this analysis. A 17-month data entry (January 2020 - May 2021) was gathered from the factory in-house clinic. The socio-demographic and clinical diagnosis entries of 8421 entries were analyzed. Result: The population of the factory workers is 5370, where 40% (2148) are female workers and 60% (3222) are male workers. The mean age of respondents is 30 years, with a SD of ±7 years. Among the chief complaints, the most common was vomiting (14%;2262) fever (14%;2247), runny nose (11%;1842), cough (9%;1465), and loose motion (8%;1364). In the diagnosis categories, gastrointestinal diseases were more predominantly diagnosed (35%;2978), followed by viral fever (21%;1772), neurological diseases (16.5%;1389) and musculoskeletal disorders (9%;768). The average cost of medicine for each respondent is BDT 36. The factory covered costs of all medication for 99% (8380) of respondents. Only 0.5% (37) was referred to a tertiary hospital for further evaluation. Conclusion: Garments workers suffer mostly from long-term occupational health hazards. Factory owners and policy makers can contribute in various ways to improving primary healthcare options for workers.展开更多
Introduction: The number of Tattoo artists has been increasing and there are important Occupational Risks associated. The aim of this article was to describe the position of these professionals regarding the Recommend...Introduction: The number of Tattoo artists has been increasing and there are important Occupational Risks associated. The aim of this article was to describe the position of these professionals regarding the Recommendations and to analyze their compliance when working alone or accompanied. Methodology: It is a Mixed Exploratory Study, involving a quantitative component (Observational Analytical of transversal nature), operated through an online survey and, in a second phase, a qualitative one (Case Study), through the use of interviews. A representative sample of the population under study was obtained, considering a 90% confidence interval. The research project was approved by a Ethics Committee and informed consent was obtained. Presentation and Discussion of the Results: The sample considered 207 questionnaires and nine interviews. The compliance with Standards increases with experience;those who reported that they do not always comply are those who use less the Personal Protective Equipment (t = 2.659;p = 0.008). Compliance is also influenced by the Perception of Risk, information, social pressure (more accentuated by COVID19) and motivation to increase profit. Those who considered the Recommendations to be adequate were statistically associated with compliance with Collective Protection Measures. Regarding the compliance when working alone or not, 86.0% stated that they maintained the same posture;of those who answered the opposite, 85.7% complied more alone. Those with less education were statistically associated to less compliance with the rules when alone (X<sup>2</sup> = 12.763;p = 0.005). Final Considerations: Previously unpublished data has been obtained, valuable to act effectively in this professional sector. It is fundamental to invest in training, as well as to elaborate Standards (developed jointly by Doctors/Safety Technicians and Tattoo artists). The organization of the Conventions should guarantee adequate conditions (area, access to disinfection/sterilization methods) and share Standards, promoting inspection and punishments for non-compliance, since they are the most unsafe places.展开更多
Construction industry is a generally risky business; it remains one of the most dirty, difficult and dangerous with poor working conditions. Despite recent efforts to improve site safety, it still accounts for a dispr...Construction industry is a generally risky business; it remains one of the most dirty, difficult and dangerous with poor working conditions. Despite recent efforts to improve site safety, it still accounts for a disproportionate number of occupational-related fatalities what is supported by statistics. According to the International Labour Organization, it accounts for 30-40% of the world＇s fatal injuries. In The European Union around thirteen employees out of every one hundred thousands are killed each year. Hence, construction site safety is a matter of global concern. However it is not easy to describe and define how to deport safely at some actual site because the workers are exposed to many safety risks varying in con^nection with conditions of the construction realization and with technologies using. The paper provides a brief knowledge from the study comparing the construction safety in Europe and North America referencing to presented statistics. There are also analyzed, described and systemized the principal groups of construction safety risks; described the interdependencies among safety risks, affecting by spatial, technological and time parameters of the building process, as well as by the site conditions.展开更多
According to several researches and survey findings, violence and the threat of violence are increasingly present at workplaces in the field of healthcare. In 2011, the Finnish Union of Health and Social Care Professi...According to several researches and survey findings, violence and the threat of violence are increasingly present at workplaces in the field of healthcare. In 2011, the Finnish Union of Health and Social Care Professionals--Tehy implemented a poster campaign targeted at the users of healthcare services, as well as healthcare staff. Representatives of local trade unions, as well as safety representatives, reported that the campaign was relevant. Most employers had a favorable attitude toward distributing campaign posters at the workplace. Raising this issue, which increases the mental burden of work and risks occupational safety at the workplace, helps to achieve improvements. Following the poster campaign, Tehy conducted an electronic survey in early 2012 about the impacts of the campaign among representatives of local trade unions （N= 279） and safety representatives （N = 278）. The campaign resulted in some working environment improvements, as well as an increase in reporting situations involving violence. On a more worrying note, the provision of workplace-level training on managing violent situations did not increase.展开更多
The core objective of this study is to conduct precise and real-time monitoring of the industrial area Dammam located in the Kingdom of Saudi Arabia (KSA) which consists of a number of various chemicals, minerals and ...The core objective of this study is to conduct precise and real-time monitoring of the industrial area Dammam located in the Kingdom of Saudi Arabia (KSA) which consists of a number of various chemicals, minerals and petrochemicals along with administrative blocks. The objective of this study is to monitor possible outdoor and indoor air pollutant in the industry working environment. This study shall help us to enable decision to be made on appropriate control measures as may be required to protect the health of employee and occupant who may be exposed to air contamination at workplace. Air pollution monitoring in ambient air environment finding shall be compared with national ambient air quality environmental standard while parameters monitoring in indoor air environment is compared with international standards such as occupational health and safety administration (OSHA), National institute for occupational safety and health (NIOSH) and Australian national health and medical research council (NHMRC). This environment review study for ensuring industry regulatory compliance for the facility and general authority of meteorology and environmental protection (GAMEP) previously known as presidency of meteorology environment (PME). This study shall be comprehensive in nature and cover two major types of monitoring and assessment such as ambient air quality monitoring and indoor air quality monitoring.展开更多
Apparel processing is an essential industry in providing clothing needs for the population. The Export Processing Zone (EPZ) in Kenya employs many employees. Garment processing releases respirable dust particles, thus...Apparel processing is an essential industry in providing clothing needs for the population. The Export Processing Zone (EPZ) in Kenya employs many employees. Garment processing releases respirable dust particles, thus exposing workers to risks to the respiratory system. The study determined the respirable dust health concerns among workers in Apparel Processing Companies (APCs) in EPZ in Machakos County, Kenya. A cross-sectional descriptive design was employed where four companies were studied. Three hundred and sixty-seven participants were selected through systematic random sampling. Data was collected using questionnaires and Interview guides. The study established that workers were exposed to respirable dust PM<sub>2.5</sub> ranging from 40.89 ± 24.0 μg·m<sup>−3</sup> to 87.49 ± 45.2 μg·m<sup>−3</sup> with a mean of 65.61 ± 31.5 μg·m<sup>−3</sup>. While PM<sub>2.5</sub> ranged from 63.59 ± 21.2 μg·m<sup>−3</sup> to 313.41 ± 468.0 μg·m<sup>−3</sup>. With a mean of 104.02 ± 26.0 μg·m<sup>−3</sup>. Workers complained of different respirable dust-related diseases. The most prevalent conditions were sneezing and coughing (86.4%), chest pains (41.1%), blocked chests (36.8%), and allergic reactions to dust (18.3%). The APC should develop an OSH management system that includes;a dust management policy, dust monitoring, Risk Assessments, Engineering controls installations, medical examination, Training on dust management, PPE provision, and use enforcement.展开更多
Studies have shown that accidents caused by human error account for 70-80% of the total number of accidents,and are the primary cause of casualties.In order to reduce the risk of safety accidents and reduce the human-...Studies have shown that accidents caused by human error account for 70-80% of the total number of accidents,and are the primary cause of casualties.In order to reduce the risk of safety accidents and reduce the human-caused accident rate,the evaluation index of safety occupational adaptability of coal excavation workers has been studied.Questionnaire survey method was used to conduct 13 physical and psychological abilities tests on 50 coal tunneling workers,and select the core ability indicators that reflect the mental load of the workers and the individual priority allocation of psychological resources.Secondly,using the Delphi method and the quartile method,the opinions of 20 experts in related fields were sought anonymously,and the main physical and mental ability indicators were screened and filtered through scoring methods.Finally,six indicators of"accuracy,attention,rapid response ability,proficiency,judgment,and foresight" were determined as the main physical and psychological indicators of coal tunneling workers.This study fills up the gap of safety occupational adaptability in the field of mining construction,and has important theoretical value and practical significance.展开更多
How to ensure the safety of occupants has become a challenge for protective design of armored vehicles against intensive blast loadings.In this study,for armored vehicles subjected to shallow-buried explosions,an anal...How to ensure the safety of occupants has become a challenge for protective design of armored vehicles against intensive blast loadings.In this study,for armored vehicles subjected to shallow-buried explosions,an analytical model was established to characterize the dynamic performance of an all-metallic sandwich floorboard attached with a double mass-spring-damping system(mimicking seat and occupant),with the former consisting of a front face,a core and a rear face.For validation,numerical simulations with the method of finite elements(FE)were performed.Good agreement between analytical predictions and numerical results was achieved.The analytical model was then employed to quantify the effects of explosive mass,yield stress of material make,configurational parameters of sandwich panel,spring stiffness,and damping coefficient on dynamic response of the sandwich panel and double mass-spring-damping system.With increasing explosive mass and decreasing yield stress of material make,the peak displacements of rear face,seat and occupant were all found to increase.As core relative density was increased,these peak displacements also increased when the ratio of face thickness to core height was relatively small.Increasing the ratio of face thickness to core height led to increased peak accelerations of seat and occupant.The peak displacement of rear face was insensitive to the increase of either spring stiffness or damping coefficient,while the peak acceleration of occupant increased with increasing spring stiffness.Upon increasing the damping coefficient between the rear face and seat or that between the seat and occupant or both,the peak acceleration of occupant increased.With occupant safety duly considered,the proposed analytical model provides useful guidance for designing high-performance protective structures for armored vehicles subjected to intensive blast loadings.展开更多
Work injuries in mines are complex and generally characterized by several factors starting from personal to technical and technical to social characteristics.In this paper,investigation was made through the applicatio...Work injuries in mines are complex and generally characterized by several factors starting from personal to technical and technical to social characteristics.In this paper,investigation was made through the application of structural equation modeling to study the nature of relationships between the influencing/associating personal factors and work injury and their sequential relationships leading towards work injury occurrences in underground coal mines.Six variables namely,rebelliousness,negative affectivity,job boredom,job dissatisfaction and work injury were considered in this study.Instruments were developed to quantify them through a questionnaire survey.Underground mine workers were randomly selected for the survey.Responses from 300 participants were used for the analysis.The structural model of LISREL was used to estimate the interrelationships amongst the variables.The case study results show that negative affectivity and job boredom induce more job dissatisfaction to the workers whereas risk taking attitude of the individual is positively influenced by job dissatisfaction as well as by rebelliousness characteristics of the individual.Finally,risk taking and job dissatisfaction are having positive significant direct relationship with work injury.The findings of this study clearly reveal that rebelliousness,negative affectivity and job boredom are the three key personal factors influencing work related injuries in mines that need to be addressed properly through effective safety programs.展开更多
Nowadays, there exist various standards for individual management systems （MSs）, at least, one for each stakeholder. New ones will be published. An integrated management system （IMS） aims to integrate some or all ...Nowadays, there exist various standards for individual management systems （MSs）, at least, one for each stakeholder. New ones will be published. An integrated management system （IMS） aims to integrate some or all components of the business into one coherent and efficient MS. Maximizing integration is more and more a strategic priority in that it constitutes an opportunity to eliminate and/or reduce potential factors of destruction of value for the organizations and also to be more competitive and consequently promote its sustainable success. A preliminary investigation was conducted on a Portuguese industrial company which, over the years, has been adopting gradually, in whole or in part, individualized management system standards （MSSs）. A research, through a questionnaire, was performed with the objective to develop, in a real business environment, an adequate and efficient IMS-QES （quality, environment, and safety） model and to potentiate for the future a generic IMS model to integrate other MSSs. The strategy and research methods have taken into consideration the case study. It was obtained a set of relevant conclusions resulting from the statistical analyses of the responses to the survey. Globally, the investigation results, by themselves, justified and prioritized the conception of a model of development of the IMS-QES and consequent definition and validation of a structure of an IMS-QES model, to be implemented at the small- and medium-sized enterprise （SME） where the investigation was conducted.展开更多
文摘Research Problem: In Abu Dhabi, limited implementation of OSH Regulations contributes to the general unawareness among employees and workers about occupational hazards and safety measures, resulting in slow responsiveness toward enforcement measures and a lack of self-regulatory approaches within companies. Purpose: The purpose of this study is to examine the implementation methods practised in Abu Dhabi with those in developed countries with established OSH regulatory bodies. Methodology: Qualitative and quantitative research methods were employed to gather primary research data. Workers from various industries in Abu Dhabi were sampled on purpose and asked to respond to questionnaires and interviews on OSH protocol awareness and implementation, and circumstances of workplace incidence. Results: The findings of this study showed that the enforcement of OSH requirements in UAE positively correlated to a reduction in the rate of work-related injury and improved business performance. The quantitative research data showed that the energy sector had the highest score (15) while the tourism sector had the lowest score (5.3) in occupational health systems and improvements in business efficiency and productivity. Implications: The outcomes of this study shed light on the importance of implementing OSH Guidelines for companies to empower their safety managers to fully enforce OSH requirements in their organisations. In conclusion, effective OSH enforcement requires cooperation between general workers and OSH managers and facilitation from business owners.
文摘INTRODUCTION Occupational safety and health (OSH) is generally the anticipation, recognition, evaluation, and control of hazards arising in or from the workplace. The study sought to assess and evaluate occupational health and safety hazards experienced among health workers in the Bono region of Ghana. METHODOLOGY The study was descriptive cross-sectional quantitative study. Data was from two hundred (200) health workers and was analyzed using the binary logistic regression analysis. RESULTS The findings from the study show that risk factors associated with biological hazards were clinical staff [OR = 2.487 (1.146 - 5.397), p = 0.021], poor maintenance of hospital items [OR = 0.446 (0.240 - 0.831), p = 0.011], assault (verbal) abuse [OR = 2.581 (1.317 - 5.059), p = 0.006] and extreme pressure from work [OR = 2.975 (1.519 - 5.829), p = 0.001]. Non-biological hazards were associated with being single [OR = 0.499 (0.263 - 0.947), p = 0.034], being verbally assaulted [OR = 3.581 (1.865 - 6.876), p CONCLUSION Risk factors related with biological hazards include poor maintenance of hospital items and extreme pressure from work whereas non-biological hazards were associated with being single, being verbally assaulted. Clinical healthcare providers are more vulnerable to occupational health and safety hazards. The study recommends the provision of strategic policies to promote and protect the workers’ health based on the development of the epidemiological profile of health, needs to be readjusted and strengthened.
文摘An Environmental Impact Assessment(EIA)was conducted for 2×150 MW Floating Photovoltaic(FPV)plants,based on the World Bank’s new Environmental and Social Framework(ESF).The project was the first of its kind financed by the World Bank in Pakistan and was geared towards renewable energy development in the country.Key components of the project included the installation of high-density polyethylene floats,Photovoltaic(PV)panels,underwater transmission cables to floating or shoreline inverters and transformers,and overhead transmission lines to existing or new substations.The EIA was commissioned to identify all environmental,health,and safety challenges associated with the construction and operation of the FPV plants.A risk screening criterion based on the World Bank ESF was employed to identify these challenges,while a mitigation hierarchy and hierarchy of control were used in providing measures to address these challenges.The environmental challenges identified were pollution of surface water and degradation of aquatic habitat from bird droppings on the floating panels;changes to the thermal structure and evaporation rate of the water body as a result of decreased sunlight access;direct impacts of shading on fish and aquatic algae;impacts on migratory birds and their habitats;and impacts on fish movements due to the anchoring and cabling of the floats.Likewise,the project-specific occupational health and safety challenges identified were the risk of falling and drowning in the water during the installation and maintenance of the panels over the water.Mitigation measures were provided for the identified challenges.In conclusion,the construction and operation of FPV plants have environmental,health,and safety issues.It is therefore recommended that the mitigation measures provided should be incorporated into the earlier stages of the design and operation of future similar FPV plants around the world.
文摘Insertion of Sustainable Development Goals (SDGs) into higher education is an important concern. This article aims to address the influences of SDGs in higher and engineering educational system in Egypt. The present study focuses on SDGs 3, 4, 6, 7, 9, and 11. SDG 3 is related to occupational health and SDG 4 is related to higher education development. However, SDGs 6, 7, 9, and 11 are related to both mechanical and environmental engineering, and occupational safety. The study approach involves case risk analysis, investigations, and review for design concepts of occupational health and safety before and after the Coronavirus disease (COVID-19). A number of cross-sectional studies that constitute 125 multidisciplinary research plans (MDRPs) are grouped to monitor and evaluate two main factors which are an influence of involving SDGs into engineering education and selected curriculum of occupational health and safety. Then the results of these research-based studies, which performed over four academic years started from 2017 up to date 2021, are depicted and discussed. These results reveal the importance of interlink between engineering education and the intended SDGs. The latest 25 MDRPs demonstrate that Egypt response to alleviate the COVID-19 is rapidly pronounced specially on SDGs 3 and 4 simultaneously. However, those MDRPs show that neither record impacts nor delays on SDGs 6, 7, 9 and 11. The conclusions prioritize both the advanced educational mechanisms and verify the engineering curriculums to raise awareness of SDGs among both staff members and students in Egyptian universities. Finally, future work is recommended at the end of this article to focus on each specific goal to gain deep insight to state of the art for each SDG around globe using education development.
文摘A method system was put forward based on the occupational health and safety management system to develop the dynamic safety management of coal mine. It aimed at the problems in the mining safety management and was put in practice in Lingxin coal mine of Ningxia Coal Industry Group Co., Ltd.. And good effect was obtained in safety work. It developed the mining dynamic safety management based on the building of occupational health and safety management system of mining enterprise and its main contents are as follows： timely identification and dynamic control of accident risk, persistent improvement of safety management performance according to the ＂PDCA＂ circle.
文摘Introduction/Objectives: As Tattoo is being more accepted, more professionals dedicate to it. A study was designed with the aim of analysing the perception of Tattoo Artists regarding their Occupational Health/Safety team (opinion about the support provided);as to find out what type accidents, symptoms and occupational diseases they have, in order to provide a better service. Methods: This is a mixed exploratory study, containing a quantitative observational (analytical, cross-sectional) and a qualitative component (Case Study). For the statistical analysis, predominantly non-parametric tests were used. The project was approved by the Ethics Committee and informed consent was obtained. Results: In terms of symptomatology/illnesses, musculoskeletal pathology is the most reported. In terms of accidents, cuts stand out. Several statistically significant relationships were found between the variables analysed. Discussion/Conclusions: The Occupational Health and Security services are considered insufficient by most of the Tattoo artists. It would be desirable that the Occupational Doctor has concrete knowledge regarding Tattooing, in particular semiology/pathology;makes recommendations in pharmacology and/or indicates which exams could be useful. In relation to the Safety Technician, it would be desirable also to have specific knowledge about the sector, making plausible suggestions for improvement.
文摘Nowadays,sustainability is one of the most important construction sector goals,as it is in most other sectors.However,sustainability in the construction sector is dealt mostly with its environmental and economic dimensions,and its social dimension remains in the background.This situation causes the Occupational Health and Safety(OHS),which is perhaps the most important issue within the scope of social sustainability,to be addressed on its own,and its relationship with sustainability to be not introduced clearly.This study discussed the relationship between social sustainability and OHS in the construction sector.Based on the fact that in construction projects,the sustainability goal should be revealed forward to a great extent at the design stage,how to contribute to OHS by budgeting OHS activities together with project activities was explained.We intended to contribute to the provision of OHS and thus the social sustainability of construction projects by revealing how the budgeting will be done and how much OHS budget will be,by referring to the studies in the literature conducted about OHS budgeting and presented robust numerical data.The study is expected to help construction sector stakeholders to understand the relationship between social sustainability and OHS and to provide a clear picture of the role of budgeting in this respect.
文摘The daily operations in the mining industry are still a significant source of risk with regard to occupational safety and health(OS & H). Various research studies and statistical data world-wide show that the number of serious injuries and fatalities still remains high despite substantial efforts the industry has put in recent years in decreasing those numbers. This paper argues that the next level of safety performance will have to consider a transition from coping solely with workplace dangers, to a more systemic model taking organizational risks in consideration. In this aspect, lessons learned from the nuclear industry may be useful, as organizational learning processes are believed to be more universal than the technologies in which they are used. With the notable exception of major accidents, organizational performance has not received all the attention it deserves. A key element for reaching the next level of performance is to include organizational factors in low level events analyses, and approach the management as a risk control system. These factors will then appear not only in the event analysis,but in supervision activities, audits, change management and the like. Many recent event analyses across various industries have shown that organizational factors play a key role in creating conditions for triggering major accidents(aviation, railway transportation, nuclear industry, oil exploitation, mining, etc.).In this paper, a perspective that may be used in supervisory activities, self-assessments and minor events investigations, is presented. When ingrained in an organizational culture, such perspective has the highest potential for continuous safety improvement.
文摘This paper aims to develop a novel knowledge management framework for improving the system of pro-safety attitudes among young worker population in Poland. This is done through an efficient use of existing sources of explicit and tacit knowledge in the field of vocational occupational safety and health （OSH） training. This project identifies three specific research steps for the development of the knowledge management framework of the information technology-based approach for improving occupational safety training of young workers, including： （1） the development of the conceptual model of the flow of explicit knowledge of OSH; （2） evaluation of the effectiveness of formal and explicit knowledge sources for OSH and training methods using these sources in the context of attitudes towards health and safety at work; and （3） verification of the proposed model of vocational training with the use of combined explicit and hidden knowledge. The proposed framework includes consideration of the effectiveness of the formal and informal sources of safety knowledge. A mapping from the formal sources of explicit knowledge about the occupational safety to expected attitudes （hidden knowledge） towards OSH outcomes, including emotional, cognitive, and behavioral aspects has been used. The above framework should help to improve the system of vocational training for young workers in Poland.
文摘Introduction: Bangladesh has experienced remarkable growth in RMG over the past 25 years. With the knitwear industry providing more than 4 million direct jobs, providing better occupational health and safety of workers remains a challenge. Aim of the study: The aim of the study was to analyze the disease burden of a RMG factory, and to highlight occupational health risks. Methods: A cross-sectional study design was employed for this analysis. A 17-month data entry (January 2020 - May 2021) was gathered from the factory in-house clinic. The socio-demographic and clinical diagnosis entries of 8421 entries were analyzed. Result: The population of the factory workers is 5370, where 40% (2148) are female workers and 60% (3222) are male workers. The mean age of respondents is 30 years, with a SD of ±7 years. Among the chief complaints, the most common was vomiting (14%;2262) fever (14%;2247), runny nose (11%;1842), cough (9%;1465), and loose motion (8%;1364). In the diagnosis categories, gastrointestinal diseases were more predominantly diagnosed (35%;2978), followed by viral fever (21%;1772), neurological diseases (16.5%;1389) and musculoskeletal disorders (9%;768). The average cost of medicine for each respondent is BDT 36. The factory covered costs of all medication for 99% (8380) of respondents. Only 0.5% (37) was referred to a tertiary hospital for further evaluation. Conclusion: Garments workers suffer mostly from long-term occupational health hazards. Factory owners and policy makers can contribute in various ways to improving primary healthcare options for workers.
文摘Introduction: The number of Tattoo artists has been increasing and there are important Occupational Risks associated. The aim of this article was to describe the position of these professionals regarding the Recommendations and to analyze their compliance when working alone or accompanied. Methodology: It is a Mixed Exploratory Study, involving a quantitative component (Observational Analytical of transversal nature), operated through an online survey and, in a second phase, a qualitative one (Case Study), through the use of interviews. A representative sample of the population under study was obtained, considering a 90% confidence interval. The research project was approved by a Ethics Committee and informed consent was obtained. Presentation and Discussion of the Results: The sample considered 207 questionnaires and nine interviews. The compliance with Standards increases with experience;those who reported that they do not always comply are those who use less the Personal Protective Equipment (t = 2.659;p = 0.008). Compliance is also influenced by the Perception of Risk, information, social pressure (more accentuated by COVID19) and motivation to increase profit. Those who considered the Recommendations to be adequate were statistically associated with compliance with Collective Protection Measures. Regarding the compliance when working alone or not, 86.0% stated that they maintained the same posture;of those who answered the opposite, 85.7% complied more alone. Those with less education were statistically associated to less compliance with the rules when alone (X<sup>2</sup> = 12.763;p = 0.005). Final Considerations: Previously unpublished data has been obtained, valuable to act effectively in this professional sector. It is fundamental to invest in training, as well as to elaborate Standards (developed jointly by Doctors/Safety Technicians and Tattoo artists). The organization of the Conventions should guarantee adequate conditions (area, access to disinfection/sterilization methods) and share Standards, promoting inspection and punishments for non-compliance, since they are the most unsafe places.
文摘Construction industry is a generally risky business; it remains one of the most dirty, difficult and dangerous with poor working conditions. Despite recent efforts to improve site safety, it still accounts for a disproportionate number of occupational-related fatalities what is supported by statistics. According to the International Labour Organization, it accounts for 30-40% of the world＇s fatal injuries. In The European Union around thirteen employees out of every one hundred thousands are killed each year. Hence, construction site safety is a matter of global concern. However it is not easy to describe and define how to deport safely at some actual site because the workers are exposed to many safety risks varying in con^nection with conditions of the construction realization and with technologies using. The paper provides a brief knowledge from the study comparing the construction safety in Europe and North America referencing to presented statistics. There are also analyzed, described and systemized the principal groups of construction safety risks; described the interdependencies among safety risks, affecting by spatial, technological and time parameters of the building process, as well as by the site conditions.
文摘According to several researches and survey findings, violence and the threat of violence are increasingly present at workplaces in the field of healthcare. In 2011, the Finnish Union of Health and Social Care Professionals--Tehy implemented a poster campaign targeted at the users of healthcare services, as well as healthcare staff. Representatives of local trade unions, as well as safety representatives, reported that the campaign was relevant. Most employers had a favorable attitude toward distributing campaign posters at the workplace. Raising this issue, which increases the mental burden of work and risks occupational safety at the workplace, helps to achieve improvements. Following the poster campaign, Tehy conducted an electronic survey in early 2012 about the impacts of the campaign among representatives of local trade unions （N= 279） and safety representatives （N = 278）. The campaign resulted in some working environment improvements, as well as an increase in reporting situations involving violence. On a more worrying note, the provision of workplace-level training on managing violent situations did not increase.
文摘The core objective of this study is to conduct precise and real-time monitoring of the industrial area Dammam located in the Kingdom of Saudi Arabia (KSA) which consists of a number of various chemicals, minerals and petrochemicals along with administrative blocks. The objective of this study is to monitor possible outdoor and indoor air pollutant in the industry working environment. This study shall help us to enable decision to be made on appropriate control measures as may be required to protect the health of employee and occupant who may be exposed to air contamination at workplace. Air pollution monitoring in ambient air environment finding shall be compared with national ambient air quality environmental standard while parameters monitoring in indoor air environment is compared with international standards such as occupational health and safety administration (OSHA), National institute for occupational safety and health (NIOSH) and Australian national health and medical research council (NHMRC). This environment review study for ensuring industry regulatory compliance for the facility and general authority of meteorology and environmental protection (GAMEP) previously known as presidency of meteorology environment (PME). This study shall be comprehensive in nature and cover two major types of monitoring and assessment such as ambient air quality monitoring and indoor air quality monitoring.
文摘Apparel processing is an essential industry in providing clothing needs for the population. The Export Processing Zone (EPZ) in Kenya employs many employees. Garment processing releases respirable dust particles, thus exposing workers to risks to the respiratory system. The study determined the respirable dust health concerns among workers in Apparel Processing Companies (APCs) in EPZ in Machakos County, Kenya. A cross-sectional descriptive design was employed where four companies were studied. Three hundred and sixty-seven participants were selected through systematic random sampling. Data was collected using questionnaires and Interview guides. The study established that workers were exposed to respirable dust PM<sub>2.5</sub> ranging from 40.89 ± 24.0 μg·m<sup>−3</sup> to 87.49 ± 45.2 μg·m<sup>−3</sup> with a mean of 65.61 ± 31.5 μg·m<sup>−3</sup>. While PM<sub>2.5</sub> ranged from 63.59 ± 21.2 μg·m<sup>−3</sup> to 313.41 ± 468.0 μg·m<sup>−3</sup>. With a mean of 104.02 ± 26.0 μg·m<sup>−3</sup>. Workers complained of different respirable dust-related diseases. The most prevalent conditions were sneezing and coughing (86.4%), chest pains (41.1%), blocked chests (36.8%), and allergic reactions to dust (18.3%). The APC should develop an OSH management system that includes;a dust management policy, dust monitoring, Risk Assessments, Engineering controls installations, medical examination, Training on dust management, PPE provision, and use enforcement.
文摘Studies have shown that accidents caused by human error account for 70-80% of the total number of accidents,and are the primary cause of casualties.In order to reduce the risk of safety accidents and reduce the human-caused accident rate,the evaluation index of safety occupational adaptability of coal excavation workers has been studied.Questionnaire survey method was used to conduct 13 physical and psychological abilities tests on 50 coal tunneling workers,and select the core ability indicators that reflect the mental load of the workers and the individual priority allocation of psychological resources.Secondly,using the Delphi method and the quartile method,the opinions of 20 experts in related fields were sought anonymously,and the main physical and mental ability indicators were screened and filtered through scoring methods.Finally,six indicators of"accuracy,attention,rapid response ability,proficiency,judgment,and foresight" were determined as the main physical and psychological indicators of coal tunneling workers.This study fills up the gap of safety occupational adaptability in the field of mining construction,and has important theoretical value and practical significance.
基金supported by the National Natural Science Foundation of China(Grant Nos.11972185 and 12002156)the Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures(Grant No.MCMS-I-0222K01)+1 种基金the Fund of Prospective Layout of Scientific Research for NUAAthe Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘How to ensure the safety of occupants has become a challenge for protective design of armored vehicles against intensive blast loadings.In this study,for armored vehicles subjected to shallow-buried explosions,an analytical model was established to characterize the dynamic performance of an all-metallic sandwich floorboard attached with a double mass-spring-damping system(mimicking seat and occupant),with the former consisting of a front face,a core and a rear face.For validation,numerical simulations with the method of finite elements(FE)were performed.Good agreement between analytical predictions and numerical results was achieved.The analytical model was then employed to quantify the effects of explosive mass,yield stress of material make,configurational parameters of sandwich panel,spring stiffness,and damping coefficient on dynamic response of the sandwich panel and double mass-spring-damping system.With increasing explosive mass and decreasing yield stress of material make,the peak displacements of rear face,seat and occupant were all found to increase.As core relative density was increased,these peak displacements also increased when the ratio of face thickness to core height was relatively small.Increasing the ratio of face thickness to core height led to increased peak accelerations of seat and occupant.The peak displacement of rear face was insensitive to the increase of either spring stiffness or damping coefficient,while the peak acceleration of occupant increased with increasing spring stiffness.Upon increasing the damping coefficient between the rear face and seat or that between the seat and occupant or both,the peak acceleration of occupant increased.With occupant safety duly considered,the proposed analytical model provides useful guidance for designing high-performance protective structures for armored vehicles subjected to intensive blast loadings.
文摘Work injuries in mines are complex and generally characterized by several factors starting from personal to technical and technical to social characteristics.In this paper,investigation was made through the application of structural equation modeling to study the nature of relationships between the influencing/associating personal factors and work injury and their sequential relationships leading towards work injury occurrences in underground coal mines.Six variables namely,rebelliousness,negative affectivity,job boredom,job dissatisfaction and work injury were considered in this study.Instruments were developed to quantify them through a questionnaire survey.Underground mine workers were randomly selected for the survey.Responses from 300 participants were used for the analysis.The structural model of LISREL was used to estimate the interrelationships amongst the variables.The case study results show that negative affectivity and job boredom induce more job dissatisfaction to the workers whereas risk taking attitude of the individual is positively influenced by job dissatisfaction as well as by rebelliousness characteristics of the individual.Finally,risk taking and job dissatisfaction are having positive significant direct relationship with work injury.The findings of this study clearly reveal that rebelliousness,negative affectivity and job boredom are the three key personal factors influencing work related injuries in mines that need to be addressed properly through effective safety programs.
基金Acknowledgements： This work had the financial support of the Portuguese National Science Foundation （FCT） through the Research Unit, UI 4005, Project Reference PEst-OE/EME/UI4005/2011.
文摘Nowadays, there exist various standards for individual management systems （MSs）, at least, one for each stakeholder. New ones will be published. An integrated management system （IMS） aims to integrate some or all components of the business into one coherent and efficient MS. Maximizing integration is more and more a strategic priority in that it constitutes an opportunity to eliminate and/or reduce potential factors of destruction of value for the organizations and also to be more competitive and consequently promote its sustainable success. A preliminary investigation was conducted on a Portuguese industrial company which, over the years, has been adopting gradually, in whole or in part, individualized management system standards （MSSs）. A research, through a questionnaire, was performed with the objective to develop, in a real business environment, an adequate and efficient IMS-QES （quality, environment, and safety） model and to potentiate for the future a generic IMS model to integrate other MSSs. The strategy and research methods have taken into consideration the case study. It was obtained a set of relevant conclusions resulting from the statistical analyses of the responses to the survey. Globally, the investigation results, by themselves, justified and prioritized the conception of a model of development of the IMS-QES and consequent definition and validation of a structure of an IMS-QES model, to be implemented at the small- and medium-sized enterprise （SME） where the investigation was conducted.
