The Kalatongke Cu-Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt （CAOB）. The chemical and carbo...The Kalatongke Cu-Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt （CAOB）. The chemical and carbon isotopic compositions of the volatiles trapped in olivine, pyroxene and sulfide mineral separates were analyzed by vacuum stepwise-heating mass spectrometry. The results show that the released volatiles are concentrated at three temperature intervals of 200-400°C, 400-900°C and 900-1200°C. The released volatiles from silicate mineral separates at 400-900°C and 900-1200°C have similar chemical and carbon isotopic compositions, which are mainly composed of H2O （av. ~92 mol%） with minor H2, CO2, H2S and SO2, and they are likely associated with the ore-forming magmatic volatiles. Light δ13CCO2 values （from -20.86‰ to -12.85‰） of pyroxene indicate crustal contamination occurred prior to or synchronous with pyroxene crystallization of mantlederived ore-forming magma. The elevated contents of H2 and H2O in the olivine and pyroxene suggest a deep mantle-originated ore-forming volatile mixed with aqueous volatiles from recycled subducted slab. High contents of CO2 in the ore-forming magma volatiles led to an increase in oxygen fugacity, and thereby reduced the solubility of sulfur in the magma, then triggered sulfur saturation followed by sulfide melt segregation; CO2 contents correlated with Cu contents in the whole rocks suggest that a supercritical state of CO2 in the ore-forming magma system under high temperature and pressure conditions might play a key role in the assemblage of huge Cu and Ni elements. The volatiles released from constituent minerals of intrusion 1# have more CO2 and SO2 oxidized gases, higher CO2/CH4 and SO2/H2S ratios and lighter δ13CCO2 than those of intrusions 2# and 3#. This combination suggests that the higher oxidation state of the volatiles in intrusion 1# than intrusions 2# and 3#, which could be one of key ore-forming factors for large amounts of ores and high contents of Cu and Ni in intrusion 1#. The volatiles released at 200-400°C are dominated by H2O with minor CO2, N2＋CO and SO2, with δ13CCO2 values （-25.66‰ to -22.98‰） within the crustal ranges, and are considered to be related to secondary tectonic-hydrothermal activities.展开更多
The Liziyuan gold deposit, situated on the south side of the Shangdan suture zone, West Qinling Orogen, occurs in metamorphic volcanic rocks(greenschist facies) of the early Paleozoic Liziyuan Group and in Indosinian ...The Liziyuan gold deposit, situated on the south side of the Shangdan suture zone, West Qinling Orogen, occurs in metamorphic volcanic rocks(greenschist facies) of the early Paleozoic Liziyuan Group and in Indosinian Tianzishan monzogranite. Orebodies in the Liziyuan gold field are controlled by the ductile-brittle shear zone, and by thrusting nappe faults related to the Indosinian orogeny. In detail, this paper analyzed the geological characteristics of the Liziyuan gold field, and the Pb isotopes of the Lziyuan host rocks, granitoids(Tianzishan monzogranite and Jiancaowan syenite porphyry), sulfides, and auriferous quartz veins by multiple-collector inductively coupled plasma mass spectrometry(MC-ICPMS). In addition, previous data on the sulfur, hydrogen, and oxygen isotopes were employed to discuss the possible sources of the ore-forming fluids and materials, and to further understand the tectonic setting of the Liziyuan gold deposit. The sulfides and their host rocks(Lziyuan Group), Tianzishan monzogranite and Jiancaowan syenite porphyry, and auriferous quartz veins have similar Pb isotopic compositions.Zartman’s plumbotectonic model diagram shows that most of the data for the deposit fall near the orogenic Pb evolutionary curve or within the area between the orogenic and mantle Pb evolutionary curves. In the△β-△γ diagram, which genetically classifies the lead isotopes, most of the data fall within the range of the subduction-zone lead mixed with upper crust and mantle. This indicates that a complex source of the ore lead formed in the orogenic environment. The δ34S values of the sulfides range from 3.90 to 8.50‰(average6.80‰), with a pronounced mode at 5.00‰-8.00‰. These values are consistent with that of orogenic gold deposits worldwide, indicating that the sulfur sourced mainly from reduced metamorphic fluids. The isotopic hydrogen and oxygen compositions support a predominantly metamorphic origin of the oreforming fluids, with possible mixing of minor magmatic fluids, but the late stage was dominated by meteoric water. The characteristics of the Liziyuan gold deposit formed in the Indosinian orogenic environment of the Qinling Orogen are consistent with those of orogenic gold deposits found worldwide.展开更多
The Gaoshan gold-silver deposit, located between the Yuyao-Lishui Fault and Jiangshan- Shaoxing fault in Longquan Area, occurs in the Suichang-Longquan gold-silver polymetallic metallogenic belt. This study conducted ...The Gaoshan gold-silver deposit, located between the Yuyao-Lishui Fault and Jiangshan- Shaoxing fault in Longquan Area, occurs in the Suichang-Longquan gold-silver polymetallic metallogenic belt. This study conducted an investigation for ore-forming fluids using microthermometry, D-O isotope and trace element. The results show that two types of fluid inclusions involved into the formation of the deposit are pure liquid phase and gas-liquid phase aqueous inclusions. The homogenization temperature and salinity of major mineralization phase ranges from 156~C to 236~C （average 200~C） and 0.35% to 8.68% （NaCleqv） （average 3.68%）, respectively, indicating that the ore-forming fluid is characteristic of low temperature and low salinity. The ore- forming pressure ranges between in 118.02 to 232.13＂105 pa, and it is estabmiated that the ore- forming depth ranges from 0.39 to 0.77 km, indicating it is a hypabyssal deposit in genesis. The low rare earth elements content in pyrites, widely developed fluorite in late ore-forming stage and lack of chlorargyrite （AgCI）, indicates that the ore-forming fluid is rich in F rather than CI. The ratios of Y/ Ho, Zr/Hf and Nb/Ta of between different samples have little difference, indicating that the later hydrothermal activities had no effects on the former hydrothermal fluid. The chondrite-normalized REE patterns of pyrites from country rocks and ore veins are basically identical, with the characteristics of light REE enrichment and negative Eu anomalies, implying that the ore-forming fluid was oxidative and derived partly from the country rocks. The JD and jlSo of fluid inclusions in quartz formed during the main metallogenic stage range from -105%o to -69 %0 and -6.01%o to -3.81%o, respectively. The D-O isotopic diagram shows that the metallogenic fluid is characterized by the mixing of formation water and meteoric water, without involvement of magmatic water. The geological and geochemical characteristics of the Gaoshan gold-silver deposit are similar to those of continental volcanic hydrothermal deposit, and could be assigned to the continental volcanic hydrothermal gold-silver deposit type.展开更多
The Badi copper deposit is located in Shangjiang town, Shangri-La County, Yunnan Province. Tectonically, it belongs to the Sanjiang Block. Vapor-liquid two-phase fluid inclusions, CO2-bearing fluid inclusions, and dau...The Badi copper deposit is located in Shangjiang town, Shangri-La County, Yunnan Province. Tectonically, it belongs to the Sanjiang Block. Vapor-liquid two-phase fluid inclusions, CO2-bearing fluid inclusions, and daugh- ter-beating inclusions were identified in sulfide-rich quartz veins. Microthermometric and Raman spectroscopy studies revealed their types of ore-forming fluids： （1） low-tem- perature, low-salinity fluid; （2） medium-temperature, low salinity CO2-bearing; and （3） high-temperature, Fe-rich, high sulfur fugacity. The δ^18O values of chalcopyrite- bearing quartz ranged from 4.96‰ to 5.86%0, with an average of 5.40%0. The δD values of ore-forming fluid in equilibrium with the sulfide-bearing quartz were from - 87‰ to - 107‰, with an average of - 97.86%0. These isotopic features indicate that the ore-forming fluid is a mixing fluid between magmatic fluid and meteoric water. The δ^34S values of chalcopyrite ranged from 13.3‰ to 15.5‰, with an average of 14.3‰. Sulfur isotope values suggest that the sulfur in the deposit most likely derived from seawater. Various fluid inclusions coexisted in the samples; similar homogenization temperature to different phases suggests that the Badi fluid inclusions might have been captured under a boiling system. Fluid boiling caused by fault activity could be the main reason for the mineral precipitation in the Badi deposit.展开更多
The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, inc...The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, including the quartz ± pyrite, quartz-polymetallic sulfide, and quartz-carbonate ± pyrite stages. From the early to late stages, the homogenization temperatures of primary fluid inclusions are 281–362°C, 227–331°C, and 149–261°C, respectively. The corresponding salinities estimated for these fluids are 3.9–9.9 wt%, 0.4–9.4 wt%, and 0.7–7.2 wt% Na Cl equiv. Combined with laser Raman spectroscopy data, the ore-forming fluid belongs to a H_(2)O-CO_(2)-Na Cl ± CH_4 system with medium–low temperature and salinity. The δ~(18)Ofluid and δD values for the quartz veins are-1.0‰ to 6.0‰ and-105‰ to-84‰, respectively, which indicates that the ore-forming fluid is of mixed source, mainly derived from magma, with a contribution from meteoric water. Pyrite has been identified into three generations based on mineral paragenetic sequencing, including Py1, Py2, and Py3. The pyrites have δ~(34)S sulfur isotopic compositions from three stages between 3.7‰ and 8.4‰, indicating that sulfur mainly originated from magma. Te, Bi, Sb, and Cu contents in pyrite were all high and showed a strong correlation with Au concentrations. Native gold and the Au-Ag-Bi telluride minerals were formed concurrently, and the As concentration was low and decoupled from the Au content. Therefore, Te, Bi, Sb and other low-melting point chalcophile elements play an important role for gold mineralization in arsenic-deficient ore-forming fluid. Combined with the geological setting, evolution of pyrite, and ore-fluids geochemistry, we propose that the Jianbeigou deposit can be classified as a magmatic–hydrothermal lode gold deposit. Gold mineralization on the southern margin of the North China Craton is related to Early Cretaceous magmatism and formed in an extensional setting.展开更多
The Yinkeng orefield in Yudu County,Jiangxi Province,SE China,is a zone of concentrated Au-Ag-Pb-Zn-Cu-Mn polymetallic ores.Based on summing up basic geology and ore geology of the orefieid,the polymetallic deposits i...The Yinkeng orefield in Yudu County,Jiangxi Province,SE China,is a zone of concentrated Au-Ag-Pb-Zn-Cu-Mn polymetallic ores.Based on summing up basic geology and ore geology of the orefieid,the polymetallic deposits in the orefield have been divided into seven major substyles according to their occurring positions and control factors.The ore-forming fluid inclusion styles in the orefield include those of two-phase fluid,liquid CO2-bearing three-phase and daughter mineral-bearing multi-phase.The homogenization temperatures range from 382° to 122℃,falling into five clusters of 370° to 390°,300° to 360°,230° to 300°,210° to 290° and 120° to 200°,and the clusters of 300° to 360°,230° to 300° and 120° to 200° are three major mineralization stages,with fluid salinity peaks from 4.14% to 7.31%,2.07% to 7.31% and 0.53% to 3.90%,respectively.The ore-forming fluids are mainly type of NaCl-H2O with medium to high density （0.74-1.02 g/cm3）,or CO2-bearing NaCl-H2O with medium to low density （0.18-0.79 g/cm3）.The fluid salinity and density both show a decline tendency with decreasing temperature.According to the measurement and calculation of Hand O-isotopic compositions in the quartz of the quartz-sulfide veins,δDV-SMOW of the ore-forming fluid is from-84‰ to-54‰,and δ18OV-SMOW of that is from 6.75‰ to 9.21‰,indicating a magmatic fluid.The δ34SV-CDT of sulfides in the ores fall into two groups,one is from-4.4‰ to 2.2‰ with average of-1.42‰,and the other from 18.8‰ to 21.6‰ with average of 19.8‰.The S-isotopic data shows one peak at-4.4‰ to 2.2‰ （meaning-1.42‰） suggesting a simple magmatic sulfur source.The ore Pbisotopic ratios are 206pb/204pb from 17.817 to 17.983,207pb/204pb from 15.470 to 15.620 and 208pb/204pb from 38.072 to 38.481,indicating characteristics of mantle-derived lead.The data show that the major ore deposits in the orefield have a magmatic-hydrothermal genesis and that the SHRIMP zircon age of the granodiorite porphyry,closely related to the mineralization,is 151.2±4.2 Ma （MSWD =1.3）,which can represent the formation ages of the ores and intrusion rocks.The study aids understanding of the ore-forming processes of the major metallic ore deposits in the orefield.展开更多
Xianghualing ore field is located in Lingwu County, Hunan Province. It lies on the in-tersection of poly-set structures and belongs to nonferrous rare-polymetal minetalization se-ries related to the crust-origin grani...Xianghualing ore field is located in Lingwu County, Hunan Province. It lies on the in-tersection of poly-set structures and belongs to nonferrous rare-polymetal minetalization se-ries related to the crust-origin granite in activation region. The strata of the ore field in-volves Cambrian （∈）, Devonian （D） and Carboniferous （C）, in which Cambrian epimeta-morphic sand stone, D<sub>2t</sub> sand stone and D<sub>2q</sub>-D（3x） dolomite are consided as the ore source-bed ofthe ore deposit. Several high-replacemental stocks, which lie above the hidden granitebatholith with NNW trending, intrude along the intersection of NW and NE trending faults.展开更多
For revealing the ore sources of the Dachang tin?polymetallic ore deposit, the lead isotopes were analyzed systematically by using the single minerals of sulphides, including pyrite, pyrrhotite, sphalerite, and galena...For revealing the ore sources of the Dachang tin?polymetallic ore deposit, the lead isotopes were analyzed systematically by using the single minerals of sulphides, including pyrite, pyrrhotite, sphalerite, and galena. Then, the mineral sources and their characteristics were discussed based on the classical lead isotope discriminating model. The results show that the lead isotope ratios of206Pb/204Pb,207Pb/204Pb, and208Pb/204Pb range from 17.478 to 18.638, 15.440 to 15.858, and 37.556 to 39.501, respectively. According to Zartman lead model, the ore lead contains the upper crust composition; however, the granite does not provide all ore leads, and other material sources exist. Obviously, the ore deposit belongs to the result of the combined effect of crust?mantle. The source rocks are characterized by a certain degree of similarity with the island arc material. Moreover, its distant origin in the upper and lower crusts may be related to the subduction island arc material or oceanic crust. The mantle-derived material may have a certain status in the source region. Meanwhile, based on the lead isotope three-dimensional topology projection vectors, the ore leads are concentrated in zoneA, which indicates the characteristics of Yangtze lead isotope province and a possible genetic relationship with Yangtze block.展开更多
The Mibei gold deposit,located in the southwestern part of the Xuefengshan uplift zone,the middle section of the Jiangnan orogenic belt in southern China,has estimated gold resources of approximately seven tons.This d...The Mibei gold deposit,located in the southwestern part of the Xuefengshan uplift zone,the middle section of the Jiangnan orogenic belt in southern China,has estimated gold resources of approximately seven tons.This deposit is primarily a quartz vein-type gold deposit,with ore bodies occurring mainly within Neoproterozoic metasediments.The main metallic minerals in the ore are pyrite,chalcopyrite,and arsenopyrite.In this study,the petrography and microthermometry of ore-forming fluid inclusions,oxygen isotopes of gold-bearing quartz,and sulfur isotopes of goldbearing sulfides and arsenopyrite were analyzed.Three types of fluid inclusions were identified:type Ⅰa three-phase inclusions comprising vapor and two phases of liquids(V_(CO_(2))+L_(CO_(2))+L_(H2O)),type Ⅰb two-phase liquids(L_(CO_(2))+L_(H2O)),typeⅡ two-phase vapor-rich inclusions(V/V+L> 50%),and type Ⅲ pure liquid inclusions.Type Ⅰ inclusions were heated uniformly to the liquid phase,type Ⅱ inclusions were heated uniformly to the gas phase,and type Ⅲ inclusions were heated without change.In general,the temperature range of homogenization to liquid phase of fluid inclusions in the Mibei gold deposit is 204-227℃.The salinity of the inclusion ranges from 4.6 to 12.2 wt% NaCl equiv.The δ~(18)O_(SMOW) of gold-bearing quartz varies from 16.9‰ to 17.5‰.The δ~(18)O_(H2O) of gold-bearing quartz are varied from 6.5‰ to 7.5‰.The δ~(34)S values of gold-bearing pyrite range from 1.7‰ to 6.8‰.The δ~(34)S values of gold-bearing arsenopy rite range from 5.6%o to 5.9‰.Theδ~(34)S values of pyrite from wall rocks slate range from 6.4‰ to 11.6‰.This evidence implies that the ore-forming fluids of the Mibei gold deposit originated from magmatic-hydrothermal processes,mixing with minor S from the surrounding metasediments.Combined with the evolution of the Jiangnan orogenic belt,due to the magmatic and tectonic activities of the Xuefengshan uplift during the Caledonian period,the fault seal mechanism controlled the ore-forming process.Overall,the Mibei gold deposit is more akin to a magmatic-hydrothermal gold deposit.展开更多
The extensive Changba-Lijiagou Pb-Zn deposit is located in the north of the Xihe–Chengxian ore cluster in West Qinling. The ore bodies are mainly hosted in the marble, dolomitic marble and biotite-calcite-quartz schi...The extensive Changba-Lijiagou Pb-Zn deposit is located in the north of the Xihe–Chengxian ore cluster in West Qinling. The ore bodies are mainly hosted in the marble, dolomitic marble and biotite-calcite-quartz schist of the Middle Devonian Anjiacha Formation, and are structurally controlled by the fault and anticline. The ore-forming process can be divided into three main stages, based on field geological features and mineral assemblages. The mineral assemblages of hydrothermal stage I are pale-yellow coarse grain, low Fe sphalerite, pyrite with pits, barite and biotite. The mineral assemblages of hydrothermal stage II are black-brown cryptocrystalline, high Fe shalerite, pyrite without pits, marcasite or arsenopyrite replace the pyrite with pits, K-feldspar. The features of hydrothermal stage III are calcite-quartz-sulfide vein cutting the laminated, banded ore body. Forty-two sulfur isotope analyses, twenty-five lead isotope analyses and nineteen carbon and oxygen isotope analyses were determined on sphalerite, pyrite, galena and calcite. The δ34 S values of stage I(20.3 to 29.0‰) are consistent with the δ34 S of sulfate(barite) in the stratum. Combined with geological feature, inclusion characteristics and EPMA data, we propose that TSR has played a key role in the formation of the sulfides in stage I. The δ34 S values of stage II sphalerite and pyrite(15.1 to 23.0‰) are between sulfides in the host rock, magmatic sulfur and the sulfate(barite) in the stratum. This result suggests that multiple S reservoirs were the sources for S2-in stage II. The δ34 S values of stage III(13.1 to 22‰) combined with the structure of the geological and mineral features suggest a magmatic hydrothermal origin of the mineralization. The lead isotope compositions of the sulfides have 206 Pb/204 Pb ranging from 17.9480 to 17.9782, 207 Pb/204 Pb ranging from 15.611 to 15.622, and 208 Pb/204 Pb ranging from 38.1368 to 38.1691 in the three ore-forming stages. The narrow and symmetric distributions of the lead isotope values reflect homogenization of granite and mantle sources before the Pb-Zn mineralization. The δ13 CPDB and δ18 OSMOW values of stage I range from-0.1 to 2.4‰ and from 18.8 to 21.7‰. The values and inclusion data indicate that the source of fluids in stage I was the dissolution of marine carbonate. The δ13 CPDB and δ18 OSMOW values of stage II range from-4 to 1‰ and from 12.3 to 20.3‰, suggesting multiple C-O reservoirs in the Changba deposit and the addition of mantle-source fluid to the system. The values in stage III are-3.1‰ and 19.7‰, respectively. We infer that the process of mineralization involved evaporitic salt and sedimentary organic-bearing units interacting through thermochemical sulfate reduction through the isotopic, mineralogy and inclusion evidences. Subsequently, the geology feature, mineral assemblages, EPMA data and isotopic values support the conclusion that the ore-forming hydrothermal fluids were mixed with magmatic hydrothermal fluids and forming the massive dark sphalerite, then yielding the calcite-quartz-sulfide vein ore type at the last stage. The genesis of this ore deposit was epigenetic rather than the previously-proposed sedimentary-exhalative(SEDEX) type.展开更多
Magnetite, as a genetic indicator of ores, has been studied in various deposits in the world. In this paper, we present textural and compositional data of magnetite from the Qimantag metallogenic belt of the Kunlun Or...Magnetite, as a genetic indicator of ores, has been studied in various deposits in the world. In this paper, we present textural and compositional data of magnetite from the Qimantag metallogenic belt of the Kunlun Orogenic Belt in China, to provide a better understanding of the formation mechanism and genesis of the metallogenic belt and to shed light on analytical protocols for the in situ chemical analysis of magnetite. Magnetite samples from various occurrences, including the ore-related granitoid pluton, mineralised endoskarn and vein-type iron ores hosted in marine carbonate intruded by the pluton, were examined using scanning electron microscopy and analysed for major and trace elements using electron microprobe and laser ablation-inductively coupled plasma-mass spectrometry. The field and microscope observation reveals that early-stage magnetite from the Hutouya and Kendekeke deposits occurs as massive or banded assemblages, whereas late- stage magnetite is disseminated or scattered in the ores. Early-stage magnetite contains high contents of Ti, V, Ga, AI and low in Mg and Mn. In contrast, late-stage magnetite is high in Mg, Mn and low in Ti, V, Ga, AI. Most magnetite grains from the Qimantag metallogenic belt deposits except the Kendekeke deposit plot in the ＂ Skarn ＂ field in the Ca＋AI＋Mn vs Ti＋V diagram, far from typical magmatic Fe deposits such as the Damiao and Panzhihua deposits. According to the （MgO＋MnO）- TiO^-AI203 diagram, magnetite grains from the Kaerqueka and Galingge deposits and the No.7 ore body of the Hutouya deposit show typical characteristics of skarn magnetite, whereas magnetite grains from the Kendekeke deposit and the No.2 ore body of the Hutouya deposit show continuous elemental variation from magmatic type to skarn type. This compositional contrast indicates that chemical composition of magnetite is largely controlled by the compositions of magmatic fluids and host rocks of the ores that have reacted with the fluids. Moreover, a combination of petrography and magnetite geochemistry indicates that the formation of those ore deposits in the Qimantag metallogenic belt involved a magmatic-hydrothermal process.展开更多
The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu a...The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu area in the middle part of the Sanjiang belt, and it represents a new style of MVT deposit that was controlled by karst structures in a thrust–fold system. Such a karst-controlled MVT Pb–Zn deposit in thrust settings has not previously been described in detail, and we therefore mapped the geology of the deposit and undertook a detailed study of its genesis. The karst structures that host the Jiamoshan deposit were formed in Triassic limestones along secondary reverse faults, and the orebodies have irregular tubular shapes. The main sulfide minerals are galena, sphalerite, and pyrite that occur in massive and lamellar form. The ore-forming fluids belonged to a Mg2+–Na+–K+–SO2-4–Cl-–F-–NO-3–H2 O system at low temperatures(120–130°C) but with high salinities(19–22% NaCl eq.). We have recognized basinal brine as the source of the ore-forming fluids on the basis of their H–O isotopic compositions(-145‰ to-93‰ for δDV-SMOW and-2.22‰ to 13.00‰ for δ18 Ofluid), the ratios of Cl/Br(14–1196) and Na/Br(16–586) in the hydrothermal fluids, and the C–O isotopic compositions of calcite(-5.0‰ to 3.7‰ for δ13 CV-PDB and 15.1‰ to 22.3‰ for δ18 OV-SMOW). These fluids may have been derived from evaporated seawater trapped in marine strata at depth or from Paleogene–Neogene basins on the surface. The δ34 S values are low in the galena(-3.2‰ to 0.6‰) but high in the barite(27.1‰), indicating that the reduced sulfur came from gypsum in the regional Cenozoic basins and from sulfates in trapped paleo-seawater by bacterial sulfate reduction. The Pb isotopic compositions of the galena samples(18.3270–18.3482 for 206 Pb/204 Pb, 15.6345–15.6390 for 207 Pb/204 Pb, and 38.5503–38.5582 for 208 Pb/204 Pb) are similar to those of the regional Triassic volcanic-arc rocks that formed during the closure of the Paleo-Tethys, indicating these arc rocks were the source of the metals in the deposit. Taking into account our new observations and data, as well as regional Pb–Zn metallogenic processes, we present here a new model for MVT deposits controlled by karst structures in thrust–fold systems.展开更多
This study focuses on experiments of Au and Cu dissolved in vapor phase in hydrothermal fluids. Experiments prove that Au and Cu can re-distribute in vapor phase and liquid phase during separation of Au- and Cu-bearin...This study focuses on experiments of Au and Cu dissolved in vapor phase in hydrothermal fluids. Experiments prove that Au and Cu can re-distribute in vapor phase and liquid phase during separation of Au- and Cu-bearing supercritical fluids to vapor and liquid phases. These experimental results can illustrate some ore geneses, where boiling phenomena of ore fluids were found. Au- and Cubearing NaHCO3-HCl solutions were heated up to more than 350℃ in the main vessel, and then passed through a phase separator in a temperature range from 250℃ to 300℃, separated into vapor and liquid phases. We collected and analyzed the liquid and vapor samples separately, and found that Au and Cu dissolved and distributed in vapor phase. In some cases, the concentrations of Au and Cu in vapor are higher than those in liquid phase. Those experiments are used to interpret field observations of fluid inclusion data of some Au and Cu deposits, and demonstrate that some Au and Cu ore deposits are derived from metals transportation in vapor phase.展开更多
The Maoping Pb-Zn deposit(~3 Mt Pb+Zn reserves with grades of 12-30 wt%)is one of the largest Pb-Zn deposits in the Sichuan-Yunnan-Guizhou(SYG)metallogenic province,which has contributed a tremendous amount of lead an...The Maoping Pb-Zn deposit(~3 Mt Pb+Zn reserves with grades of 12-30 wt%)is one of the largest Pb-Zn deposits in the Sichuan-Yunnan-Guizhou(SYG)metallogenic province,which has contributed a tremendous amount of lead and zinc resources for China.To obtain a further understanding of the sources of ore-forming materials and ore genesis of the deposit,S-Pb isotopes of sulfides and C-O isotopes of ore-stage calcites were systematically collected from representative orebodies at different elevations with a Finnigan MAT-253 mass spectrometer.The calcites separated from the sulfides of the NoⅠand NoⅡorebodies shared identical b13 CPDB values(-5.3 to-0.8‰)andδ18OSMOW values(+14.5 to+21.8‰)with those of the calcites in the SYG region,suggesting that CO2 in regional ore-forming fluids possibly had a homologous C-O source that originated from a ternary mixture of the dissolution of marine carbonate rocks,degassing process of the Emeishan mantle plume,and dehydroxylation of sedimentary organic matter.The No.Ⅰ-1 and No.Ⅰ-2 orebody was hosted in the same strata,but the sulfur source of No.Ⅰ-1 orebody(+13.1 to+19.0‰)with equilibrated sulfur fractionation(δ34Sspbaierite-<δ34Sgalena)and No.Ⅰ-2 orebody(+18.0 to+21.8‰)with sulfur equilibrium fractionation(δ34Sspnaierite>δ34-Sgalena)were different.They were derived from the allopatry thermochemical sulfate reduction(TSR)of overlying Carboniferous sulfates in the ore-hosting strata and local TSR of sulfates in the ore-bearing Upper Devonian Zaige Formation,respectively.The narrow and uniform Pb isotopic ratios of single galena grains collected from sulfides with 206Pb/204Pb of 18.713-18.759,207Pb/204Pb of 15.772-15.776 and 208Pb/204Pb of39.383-39.467 indicate a well-mixed metal source(s)that consist of Proterozoic Kunyang and Huili Group basement rocks and Devonian to Middle Permian ore-hosting sedimentary rocks.Besides,the late Permian Emeishan basalts are difficult to contribute metals for regional Pb-Zn mineralization despite a closely spatial relationship with the distribution of the Pb-Zn deposit.This is supported by Pb isotopic ratios plotting above the average upper crustal Pb evolution curves and staying far away from that of the agecorrected Emeishan basalts.Hence,taking into account of the similarities in tectonic setting,ore-hosting rock,ore assemblage,wall rock alteration,ore-controlling structure,and ore-forming materials and the differences in relationship with regional magmatism,fluid inclusion characteristic and ore grade between the Maoping deposit and typical MVT Pb-Zn deposit,the ore genesis of the Maoping deposit should be an MVT like Pb-Zn deposit.展开更多
The Shizitou molybdenum （Mo） deposit in Yongping, Jiangxi, is an important, recently discovered deposit in the eastern section of the Qin-Hang metallogenic belt. The Mo deposit is located in the outer contact zone b...The Shizitou molybdenum （Mo） deposit in Yongping, Jiangxi, is an important, recently discovered deposit in the eastern section of the Qin-Hang metallogenic belt. The Mo deposit is located in the outer contact zone behveen the porphyritic biotite granite and the Neoproterozoic migmatite, and present in the deep central part of the intrusion. Re-Os dating and S and Pb isotopic analysis have been conducted to assess the metallogenesis of the Shizitou Mo deposit. S, Pb and Re isotopes show that the ore-forming materials were derived from the porphyritic biotite granitic magma, which originated from the mixing of mantle and crust. Re-Os dating of molybdenite from the ores gives a model age from 156.9±2.2 to 158.5±2.4 Ma, with a weighted mean age of 158±1 Ma and an isochron age of 158.0±2.5 Ma. Geological and geochemical characteristics of the ore deposit and the related granitoids indicate that the Shizitou deposit is a Climax-type Mo deposit. Based on previous studies of the Qin-Hang metaliogenic belt, two metallogenic events are believed to have occurred during 172-145 Ma and 137-132 Ma. These two metallogenic periods are consistent with the timing of two metallogenic peaks during the middle to late Jurassic and the Cretaceous in South China. These events represent responses to the partial backarc extension associated with the subduction of the Izanagi plate beneath the Eurasian continent and the rapid northeastward movement of the subducting Izanagi plate.展开更多
The Tongcun Mo（Cu） deposit in Kaihua city of Zhejiang Province,eastern China,occurs in and adjacent to the Songjiazhuang granodiorite porphyry and is a medium-sized and important porphyry type ore deposit.Two irregu...The Tongcun Mo（Cu） deposit in Kaihua city of Zhejiang Province,eastern China,occurs in and adjacent to the Songjiazhuang granodiorite porphyry and is a medium-sized and important porphyry type ore deposit.Two irregular Mo（Cu） orebodies consist of various types of hydrothermal veinlets.Intensive hydrothermal alteration contains skarnization,chloritization,carbonatization,silicification and sericitization.Based on mineral assemblages and crosscutting relationships,the oreforming processes are divided into five stages,i.e.,the early stage of garnet ＋ epidote ± chlorite associated with skarnization and K-feldspar ＋ quartz ± molybdenite veins associated with potassicsilicic alteration,the quartz-sulfides stage of quartz ＋ molybdenite ± chalcopyrite ± pyrite veins,the carbonatization stage of calcite veinlets or stockworks,the sericite ＋ chalcopyrite ± pyrite stage,and the late calcite ＋ quartz stage.Only the quartz-bearing samples in the early stage and in the quartzsulfides stage are suitable for fluid inclusions（FIs） study.Four types of FIs were observed,including1） CO2-CH4 single phase FIs,2） CO2-bearing two- or three-phase FIs,3） Aqueous two-phase FIs,and4） Aqueous single phase FIs.FIs of the early stages are predominantly CO2- and CH4-rich FIs of the CO2-CH4-H2O-NaCl system,whereas minerals in the quartz-sulfides stage contain CO2-rich FIs of the CO2-H2O-NaCl system and liquid-rich FIs of the H2O-NaCl system.For the CO2-CH4 single phase FIs of the early mineralization stage,the homogenization temperatures of the CO2 phase range from 15.4 ℃ to 25.3 ℃（to liquid）,and the fluid density varies from 0.7 g/cm^3 to 0.8 g/cm^3;for two- or three-phase FIs of the CO2-CH4-H2O-NaCl system,the homogenization temperatures,salinities and densities range from 312℃ to 412℃,7.7 wt%NaCl eqv.to 10.9 wt%NaCl eqv.,and 0.9 g/cm^3 to 1.0 g/cm^3,respectively.For CO2-H2O-NaCI two- or threephase FIs of the quartz-sulfides stage,the homogenization temperatures and salinities range from255℃ to 418℃,4.8 wt%NaCl eqv.to 12.4 wt%NaCl eqv.,respectively;for H2O-NaCl two-phase FIs,the homogenization temperatures range from 230 ℃ to 368 ℃,salinities from 11.7 wt%NaCl eqv.to16.9 wt%NaCl eqv.,and densities from 0.7 g/cm^3 to 1.0 g/cm^3.Microthermometric measurements and Laser Raman spectroscopy analyses indicate that CO2 and CH4 contents and reducibility（indicated by the presence of CH4） of the fluid inclusions trapped in quartz-sulfides stage minerals are lower than those in the early stage.Twelve molybdenite separates yield a Re-Os isochron age of 163 ± 2.4 Ma,which is consistent with the emplacement age of the Tongcun,Songjiazhuang,Dayutang and Huangbaikeng granodiorite porphyries.The 〈S18OSMow values of fluids calculated from quartz of the quartz-sulfides stage range from 5.6‰ to 8.6‰,and the 〈JDSMOw values of fluid inclusions in quartz of this stage range from-71.8‰ to-88.9‰,indicating a primary magmatic fluid source.〈534SV-cdt values of sulfides range from＋1.6‰ to ＋3.8‰,which indicate that the sulfur in the ores was sourced from magmatic origins.Phase separation is inferred to have occurred from the early stage to the quartz-sulfides stage and resulted in ore mineral precipitation.The characteristics of alteration and mineralization,fluid inclusion,sulfur and hydrogen-oxygen isotope data,and molybdenite Re-Os ages all suggest that the Tongcun Mo（Cu） deposit is likely to be a reduced porphyry Mo（Cu） deposit associated with the granodiorite porphyry in the Tongcun area.展开更多
The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the hig...The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated.Carbonate minerals associated with Pb-Zn mineralization haveδ^(13)CV-PDB andδ^(18)OV-SMOW values ranging from−5.55‰to+1.35‰(mean value of−0.69‰;n=14)and+16.28‰to+25.05‰(mean value of+20.22‰;n=14),respectively.This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks.Theδ^(34)S values of sulfides range from+20.2‰to+36.8‰,with an average value of+30.0‰(n=27).These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate.The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384,and Na/Br molar ratios from 39 to 160(n=8).These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater(657 to 564),but are consistent with bittern brines through early halite precipitation.We propose that ore-forming fluids are mainly derived from evaporitic basin brines,which leached base metals from the basement and/or country rocks.The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sulfides by thermochemical sulfate reduction.展开更多
This paper demonstrates the channels and methods for location prognosis of concealed ore deposits (bodies) in the deep seated and surrounding districts of productive mines in accordance with their special features. Th...This paper demonstrates the channels and methods for location prognosis of concealed ore deposits (bodies) in the deep seated and surrounding districts of productive mines in accordance with their special features. The system frame map is built, from quick exploration in the field to the rapid building of a model indoors. The main research points of location prognosis are also discussed in the paper, which include: 1) integrating the location with the surrounding geological areas, microscopic with macroscopic; 2) analyzing and synthesizing all geological information of different levels, depths and aspects; 3) laying stress on mineralization series; 4) paying attention to the study of the distribution law of ore bodies; 5) introducing the theory of nonlinear dynamics of ore forming processes to ordinary static prognosis; 6) the necessity of the geophysical me thod in recovering information of concealed ore bodies; 7) the combination of all kinds of geology, geophysics, geochemistry and remote sensing methods.展开更多
In the Xinchang-Yongjia silver (lead-zinc) ore belt, there mainly occur the large to medium-sized Haoshi, Bamao, Dalingkou and Wubu silver deposits or silver-bearing lead-zinc deposits. On the basis of researches on t...In the Xinchang-Yongjia silver (lead-zinc) ore belt, there mainly occur the large to medium-sized Haoshi, Bamao, Dalingkou and Wubu silver deposits or silver-bearing lead-zinc deposits. On the basis of researches on these typical deposits, the mechanism of leaching-drawing mineralization of Mesozoic geothermal water and the related model are put forward in this paper in the light of the time interval between rock and formation ages as well as hydrogen, oxygen, sulphur and lead isotope geochemical characteristics. The major metallogenic process occurred in volcanic rock layers. The ore-forming fluids are geothermal water coming from meteoric water and circulating at shallow layers. This geothermal water leached and absorbed ore-forming materials from its country rocks during its flowing (such metallogenic elements as silver, lead-zinc and sulphur mainly came from consolidated volcanic rocks), leading to the formation of meso - epithermal silver deposits.展开更多
The Nage Cu-Pb deposit, a new found ore deposit in the southeast Guizhou province, southwest China, is located on the southwestern margin of the Jiangnan Orogenic Belt. Ore bodies are hosted in slate and phyllite of N...The Nage Cu-Pb deposit, a new found ore deposit in the southeast Guizhou province, southwest China, is located on the southwestern margin of the Jiangnan Orogenic Belt. Ore bodies are hosted in slate and phyllite of Neoproterozoic Jialu and Wuye Formations, and are structurally controlled by EW-trending fault. It contains Cu and Pb metals about 0.12 million tonnes with grades of 0.2 wt% to 3.4 wt% Cu and 1.1 wt% to 9.27 wt% Pb. Massive and disseminated Cu-Pb ores from the Nage deposit occur as either veinlets or disseminations in silicified rocks. The ore minerals include chalcopyrite, galena and pyrite, and gangue minerals are quartz, sericite and chlorite. The H-O isotopic compositions of quartz, S-Cu-Pb isotopic compositions of sulfide minerals, Pb isotopic compositions of whole rocks and ores have been analyzed to trace the sources of ore-forming fluids and metals for the Nage Cu-Pb deposit. The oSCUNBs values of chalcopyrite range from -0.09% to ＋0.33%0, similar to basic igneous rocks and chalcopyrite from magmatic deposits. J6SCUNBS values of chalcopyrite from the early, middle and final mineralization stages show an increasing trend due to 63Cu prior migrated in gas phase when fluids exsolution from magma, ja4ScDT values of sulfide minerals range from -2.7‰ to ＋2.8‰, similar to mantle-derived sulfur （0±3‰）. The positive correlation between J65CUNBs and ja4SCDT values of chalcopyrite indicates that a common source of copper metal and sulfur from magma. JDu2o- SMOW and JlSOH2O-SMOW values of water in fluid inclusions of quartz range from -60.7‰ to -44.4‰ and ＋7.9‰ to ＋9.0%0 （T=260℃）, respectively and fall in the field for magmatic and metamorphic waters, implicating that mixed sources for H20 in hydrothermal fluids. Ores and sulfide minerals have a small range of Pb isotopic compositions （208Pb/204pb=38.152 to 38.384, 207Pb/204Pb=15.656 to 17.708 and 206Pb/204Pb=17.991 to 18.049） that are close to orogenic belt and upper crust Pb evolution curve, and similar to Neoproterozoic host rocks （208Pb/204Pb=38.201 to 38.6373, 207pb/204pb=15.648 to 15.673 and 206pb/204pb=17.820 to 18.258）, but higher than diabase （208Pb/204pb=37.830 to 38.012, 207pb/204pb=15.620 to 15.635 and 206pb/204pb=17.808 to 17.902）. These results imply that the Pb metal originated mainly from host rocks. The H-O-S-Cu-Pb isotopes tegather with geology, indicating that the ore genesis of the Nage Cu-Pb deposit is post-magmatic hydrothermal type.展开更多
基金financially supported by NSF of China(Grant 41072056, 40772058, 91014003, 40534020 and40772062)Key Projects of China Geological Survey(1212011121092)MOE (311010)
文摘The Kalatongke Cu-Ni sulfide deposits located in the East Junggar terrane, northern Xinjiang, western China are the largest magmatic sulfide deposits in the Central Asian Orogenic Belt （CAOB）. The chemical and carbon isotopic compositions of the volatiles trapped in olivine, pyroxene and sulfide mineral separates were analyzed by vacuum stepwise-heating mass spectrometry. The results show that the released volatiles are concentrated at three temperature intervals of 200-400°C, 400-900°C and 900-1200°C. The released volatiles from silicate mineral separates at 400-900°C and 900-1200°C have similar chemical and carbon isotopic compositions, which are mainly composed of H2O （av. ~92 mol%） with minor H2, CO2, H2S and SO2, and they are likely associated with the ore-forming magmatic volatiles. Light δ13CCO2 values （from -20.86‰ to -12.85‰） of pyroxene indicate crustal contamination occurred prior to or synchronous with pyroxene crystallization of mantlederived ore-forming magma. The elevated contents of H2 and H2O in the olivine and pyroxene suggest a deep mantle-originated ore-forming volatile mixed with aqueous volatiles from recycled subducted slab. High contents of CO2 in the ore-forming magma volatiles led to an increase in oxygen fugacity, and thereby reduced the solubility of sulfur in the magma, then triggered sulfur saturation followed by sulfide melt segregation; CO2 contents correlated with Cu contents in the whole rocks suggest that a supercritical state of CO2 in the ore-forming magma system under high temperature and pressure conditions might play a key role in the assemblage of huge Cu and Ni elements. The volatiles released from constituent minerals of intrusion 1# have more CO2 and SO2 oxidized gases, higher CO2/CH4 and SO2/H2S ratios and lighter δ13CCO2 than those of intrusions 2# and 3#. This combination suggests that the higher oxidation state of the volatiles in intrusion 1# than intrusions 2# and 3#, which could be one of key ore-forming factors for large amounts of ores and high contents of Cu and Ni in intrusion 1#. The volatiles released at 200-400°C are dominated by H2O with minor CO2, N2＋CO and SO2, with δ13CCO2 values （-25.66‰ to -22.98‰） within the crustal ranges, and are considered to be related to secondary tectonic-hydrothermal activities.
基金jointly provided by the National Natural Science Foundation of China (Grant Nos. 41421002, 41730426, 41272092, and 41030423)MOST Special Fund from the State Key Laboratory of Continental Dynamics, Northwest UniversityNorthwest University Graduate Innovation and Creativity Fund (YZZ17190)
文摘The Liziyuan gold deposit, situated on the south side of the Shangdan suture zone, West Qinling Orogen, occurs in metamorphic volcanic rocks(greenschist facies) of the early Paleozoic Liziyuan Group and in Indosinian Tianzishan monzogranite. Orebodies in the Liziyuan gold field are controlled by the ductile-brittle shear zone, and by thrusting nappe faults related to the Indosinian orogeny. In detail, this paper analyzed the geological characteristics of the Liziyuan gold field, and the Pb isotopes of the Lziyuan host rocks, granitoids(Tianzishan monzogranite and Jiancaowan syenite porphyry), sulfides, and auriferous quartz veins by multiple-collector inductively coupled plasma mass spectrometry(MC-ICPMS). In addition, previous data on the sulfur, hydrogen, and oxygen isotopes were employed to discuss the possible sources of the ore-forming fluids and materials, and to further understand the tectonic setting of the Liziyuan gold deposit. The sulfides and their host rocks(Lziyuan Group), Tianzishan monzogranite and Jiancaowan syenite porphyry, and auriferous quartz veins have similar Pb isotopic compositions.Zartman’s plumbotectonic model diagram shows that most of the data for the deposit fall near the orogenic Pb evolutionary curve or within the area between the orogenic and mantle Pb evolutionary curves. In the△β-△γ diagram, which genetically classifies the lead isotopes, most of the data fall within the range of the subduction-zone lead mixed with upper crust and mantle. This indicates that a complex source of the ore lead formed in the orogenic environment. The δ34S values of the sulfides range from 3.90 to 8.50‰(average6.80‰), with a pronounced mode at 5.00‰-8.00‰. These values are consistent with that of orogenic gold deposits worldwide, indicating that the sulfur sourced mainly from reduced metamorphic fluids. The isotopic hydrogen and oxygen compositions support a predominantly metamorphic origin of the oreforming fluids, with possible mixing of minor magmatic fluids, but the late stage was dominated by meteoric water. The characteristics of the Liziyuan gold deposit formed in the Indosinian orogenic environment of the Qinling Orogen are consistent with those of orogenic gold deposits found worldwide.
基金funded by “Preliminary Study On the Metallogenic Conditions and Prospecting Direction of Gold-Silver Deposits,Suichang-Longquan Area,Zhejiang(No.:YK1401)”“Summary and Research Project of the Mineral Geology of China by Mineral Type(Group)(No.:12120114039601)”+1 种基金“Research Project of the Metallogenic Regularity of the National Important Mineral Areas(No.:1212011121037)”“Comprehensive Research Project of China’s Mineral Geology and Regional Metallogenic Regularity(China’s Mineral Geology)(No.:1212011220369)”
文摘The Gaoshan gold-silver deposit, located between the Yuyao-Lishui Fault and Jiangshan- Shaoxing fault in Longquan Area, occurs in the Suichang-Longquan gold-silver polymetallic metallogenic belt. This study conducted an investigation for ore-forming fluids using microthermometry, D-O isotope and trace element. The results show that two types of fluid inclusions involved into the formation of the deposit are pure liquid phase and gas-liquid phase aqueous inclusions. The homogenization temperature and salinity of major mineralization phase ranges from 156~C to 236~C （average 200~C） and 0.35% to 8.68% （NaCleqv） （average 3.68%）, respectively, indicating that the ore-forming fluid is characteristic of low temperature and low salinity. The ore- forming pressure ranges between in 118.02 to 232.13＂105 pa, and it is estabmiated that the ore- forming depth ranges from 0.39 to 0.77 km, indicating it is a hypabyssal deposit in genesis. The low rare earth elements content in pyrites, widely developed fluorite in late ore-forming stage and lack of chlorargyrite （AgCI）, indicates that the ore-forming fluid is rich in F rather than CI. The ratios of Y/ Ho, Zr/Hf and Nb/Ta of between different samples have little difference, indicating that the later hydrothermal activities had no effects on the former hydrothermal fluid. The chondrite-normalized REE patterns of pyrites from country rocks and ore veins are basically identical, with the characteristics of light REE enrichment and negative Eu anomalies, implying that the ore-forming fluid was oxidative and derived partly from the country rocks. The JD and jlSo of fluid inclusions in quartz formed during the main metallogenic stage range from -105%o to -69 %0 and -6.01%o to -3.81%o, respectively. The D-O isotopic diagram shows that the metallogenic fluid is characterized by the mixing of formation water and meteoric water, without involvement of magmatic water. The geological and geochemical characteristics of the Gaoshan gold-silver deposit are similar to those of continental volcanic hydrothermal deposit, and could be assigned to the continental volcanic hydrothermal gold-silver deposit type.
基金jointly supported by the Geological Survey of China (Grant No. 1212011140050)the National Natural Science Foundation of China (Grant No. 41663006)
文摘The Badi copper deposit is located in Shangjiang town, Shangri-La County, Yunnan Province. Tectonically, it belongs to the Sanjiang Block. Vapor-liquid two-phase fluid inclusions, CO2-bearing fluid inclusions, and daugh- ter-beating inclusions were identified in sulfide-rich quartz veins. Microthermometric and Raman spectroscopy studies revealed their types of ore-forming fluids： （1） low-tem- perature, low-salinity fluid; （2） medium-temperature, low salinity CO2-bearing; and （3） high-temperature, Fe-rich, high sulfur fugacity. The δ^18O values of chalcopyrite- bearing quartz ranged from 4.96‰ to 5.86%0, with an average of 5.40%0. The δD values of ore-forming fluid in equilibrium with the sulfide-bearing quartz were from - 87‰ to - 107‰, with an average of - 97.86%0. These isotopic features indicate that the ore-forming fluid is a mixing fluid between magmatic fluid and meteoric water. The δ^34S values of chalcopyrite ranged from 13.3‰ to 15.5‰, with an average of 14.3‰. Sulfur isotope values suggest that the sulfur in the deposit most likely derived from seawater. Various fluid inclusions coexisted in the samples; similar homogenization temperature to different phases suggests that the Badi fluid inclusions might have been captured under a boiling system. Fluid boiling caused by fault activity could be the main reason for the mineral precipitation in the Badi deposit.
基金jointed supported by National Key Research and Development Program of China (Grant No. 2021YFC2901704)the National Natural Science Foundation of China (Grant No. 41930430)the State Key Laboratory of Lithospheric Evolution, IGGCAS (Grant No. SKL-Z201905)。
文摘The Jianbeigou gold deposit is a typical lode gold deposit in the Qinling metallogenic belt, located on the southern margin of the North China Craton. Three stages of the hydrothermal process can be distinguished, including the quartz ± pyrite, quartz-polymetallic sulfide, and quartz-carbonate ± pyrite stages. From the early to late stages, the homogenization temperatures of primary fluid inclusions are 281–362°C, 227–331°C, and 149–261°C, respectively. The corresponding salinities estimated for these fluids are 3.9–9.9 wt%, 0.4–9.4 wt%, and 0.7–7.2 wt% Na Cl equiv. Combined with laser Raman spectroscopy data, the ore-forming fluid belongs to a H_(2)O-CO_(2)-Na Cl ± CH_4 system with medium–low temperature and salinity. The δ~(18)Ofluid and δD values for the quartz veins are-1.0‰ to 6.0‰ and-105‰ to-84‰, respectively, which indicates that the ore-forming fluid is of mixed source, mainly derived from magma, with a contribution from meteoric water. Pyrite has been identified into three generations based on mineral paragenetic sequencing, including Py1, Py2, and Py3. The pyrites have δ~(34)S sulfur isotopic compositions from three stages between 3.7‰ and 8.4‰, indicating that sulfur mainly originated from magma. Te, Bi, Sb, and Cu contents in pyrite were all high and showed a strong correlation with Au concentrations. Native gold and the Au-Ag-Bi telluride minerals were formed concurrently, and the As concentration was low and decoupled from the Au content. Therefore, Te, Bi, Sb and other low-melting point chalcophile elements play an important role for gold mineralization in arsenic-deficient ore-forming fluid. Combined with the geological setting, evolution of pyrite, and ore-fluids geochemistry, we propose that the Jianbeigou deposit can be classified as a magmatic–hydrothermal lode gold deposit. Gold mineralization on the southern margin of the North China Craton is related to Early Cretaceous magmatism and formed in an extensional setting.
基金financially supported jointly by the National Key Basic Research Program (Grant 2012CB416704) from the Ministry of Science and Technology, Chinathe Program of High-level Geological Talents (201309) and Youth Geological Talents (201112) from the China Geological Surveyby Geological Survey Program Grant 1212010561603-2 from the China Geological Survey
文摘The Yinkeng orefield in Yudu County,Jiangxi Province,SE China,is a zone of concentrated Au-Ag-Pb-Zn-Cu-Mn polymetallic ores.Based on summing up basic geology and ore geology of the orefieid,the polymetallic deposits in the orefield have been divided into seven major substyles according to their occurring positions and control factors.The ore-forming fluid inclusion styles in the orefield include those of two-phase fluid,liquid CO2-bearing three-phase and daughter mineral-bearing multi-phase.The homogenization temperatures range from 382° to 122℃,falling into five clusters of 370° to 390°,300° to 360°,230° to 300°,210° to 290° and 120° to 200°,and the clusters of 300° to 360°,230° to 300° and 120° to 200° are three major mineralization stages,with fluid salinity peaks from 4.14% to 7.31%,2.07% to 7.31% and 0.53% to 3.90%,respectively.The ore-forming fluids are mainly type of NaCl-H2O with medium to high density （0.74-1.02 g/cm3）,or CO2-bearing NaCl-H2O with medium to low density （0.18-0.79 g/cm3）.The fluid salinity and density both show a decline tendency with decreasing temperature.According to the measurement and calculation of Hand O-isotopic compositions in the quartz of the quartz-sulfide veins,δDV-SMOW of the ore-forming fluid is from-84‰ to-54‰,and δ18OV-SMOW of that is from 6.75‰ to 9.21‰,indicating a magmatic fluid.The δ34SV-CDT of sulfides in the ores fall into two groups,one is from-4.4‰ to 2.2‰ with average of-1.42‰,and the other from 18.8‰ to 21.6‰ with average of 19.8‰.The S-isotopic data shows one peak at-4.4‰ to 2.2‰ （meaning-1.42‰） suggesting a simple magmatic sulfur source.The ore Pbisotopic ratios are 206pb/204pb from 17.817 to 17.983,207pb/204pb from 15.470 to 15.620 and 208pb/204pb from 38.072 to 38.481,indicating characteristics of mantle-derived lead.The data show that the major ore deposits in the orefield have a magmatic-hydrothermal genesis and that the SHRIMP zircon age of the granodiorite porphyry,closely related to the mineralization,is 151.2±4.2 Ma （MSWD =1.3）,which can represent the formation ages of the ores and intrusion rocks.The study aids understanding of the ore-forming processes of the major metallic ore deposits in the orefield.
文摘Xianghualing ore field is located in Lingwu County, Hunan Province. It lies on the in-tersection of poly-set structures and belongs to nonferrous rare-polymetal minetalization se-ries related to the crust-origin granite in activation region. The strata of the ore field in-volves Cambrian （∈）, Devonian （D） and Carboniferous （C）, in which Cambrian epimeta-morphic sand stone, D<sub>2t</sub> sand stone and D<sub>2q</sub>-D（3x） dolomite are consided as the ore source-bed ofthe ore deposit. Several high-replacemental stocks, which lie above the hidden granitebatholith with NNW trending, intrude along the intersection of NW and NE trending faults.
基金Project(41202051)supported by the National Natural Science Foundation of ChinaProject(S2014GK3005)supported by Hunan Industrial Science and Technology Support Program+1 种基金Project(2012M521721)supported by China Postdoctoral Science FoundationProject(CSUZC2013021)supported by the Open-end Fund for the Valuable and Precision Instruments of Central South University,China
文摘For revealing the ore sources of the Dachang tin?polymetallic ore deposit, the lead isotopes were analyzed systematically by using the single minerals of sulphides, including pyrite, pyrrhotite, sphalerite, and galena. Then, the mineral sources and their characteristics were discussed based on the classical lead isotope discriminating model. The results show that the lead isotope ratios of206Pb/204Pb,207Pb/204Pb, and208Pb/204Pb range from 17.478 to 18.638, 15.440 to 15.858, and 37.556 to 39.501, respectively. According to Zartman lead model, the ore lead contains the upper crust composition; however, the granite does not provide all ore leads, and other material sources exist. Obviously, the ore deposit belongs to the result of the combined effect of crust?mantle. The source rocks are characterized by a certain degree of similarity with the island arc material. Moreover, its distant origin in the upper and lower crusts may be related to the subduction island arc material or oceanic crust. The mantle-derived material may have a certain status in the source region. Meanwhile, based on the lead isotope three-dimensional topology projection vectors, the ore leads are concentrated in zoneA, which indicates the characteristics of Yangtze lead isotope province and a possible genetic relationship with Yangtze block.
基金financially supported by National Natural Science Foundation of China (Grant No. 42273063)the Young Elite Scientists Sponsorship (YESS) Program of the China Association for Science and Technology (Grant No. YESS20220661)。
文摘The Mibei gold deposit,located in the southwestern part of the Xuefengshan uplift zone,the middle section of the Jiangnan orogenic belt in southern China,has estimated gold resources of approximately seven tons.This deposit is primarily a quartz vein-type gold deposit,with ore bodies occurring mainly within Neoproterozoic metasediments.The main metallic minerals in the ore are pyrite,chalcopyrite,and arsenopyrite.In this study,the petrography and microthermometry of ore-forming fluid inclusions,oxygen isotopes of gold-bearing quartz,and sulfur isotopes of goldbearing sulfides and arsenopyrite were analyzed.Three types of fluid inclusions were identified:type Ⅰa three-phase inclusions comprising vapor and two phases of liquids(V_(CO_(2))+L_(CO_(2))+L_(H2O)),type Ⅰb two-phase liquids(L_(CO_(2))+L_(H2O)),typeⅡ two-phase vapor-rich inclusions(V/V+L> 50%),and type Ⅲ pure liquid inclusions.Type Ⅰ inclusions were heated uniformly to the liquid phase,type Ⅱ inclusions were heated uniformly to the gas phase,and type Ⅲ inclusions were heated without change.In general,the temperature range of homogenization to liquid phase of fluid inclusions in the Mibei gold deposit is 204-227℃.The salinity of the inclusion ranges from 4.6 to 12.2 wt% NaCl equiv.The δ~(18)O_(SMOW) of gold-bearing quartz varies from 16.9‰ to 17.5‰.The δ~(18)O_(H2O) of gold-bearing quartz are varied from 6.5‰ to 7.5‰.The δ~(34)S values of gold-bearing pyrite range from 1.7‰ to 6.8‰.The δ~(34)S values of gold-bearing arsenopy rite range from 5.6%o to 5.9‰.Theδ~(34)S values of pyrite from wall rocks slate range from 6.4‰ to 11.6‰.This evidence implies that the ore-forming fluids of the Mibei gold deposit originated from magmatic-hydrothermal processes,mixing with minor S from the surrounding metasediments.Combined with the evolution of the Jiangnan orogenic belt,due to the magmatic and tectonic activities of the Xuefengshan uplift during the Caledonian period,the fault seal mechanism controlled the ore-forming process.Overall,the Mibei gold deposit is more akin to a magmatic-hydrothermal gold deposit.
基金supported and funded by the Special Research Funding for Public Benefit sponsored by MLR(Grant No.200911007-21)the Fundamental Research Funds for the Central Public Welfare Research Institutes(Grant No.K1612 and K1607)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.300102279401)the Geological Survey Project(Grant No.N1916)and(Grant No.DD20190368)。
文摘The extensive Changba-Lijiagou Pb-Zn deposit is located in the north of the Xihe–Chengxian ore cluster in West Qinling. The ore bodies are mainly hosted in the marble, dolomitic marble and biotite-calcite-quartz schist of the Middle Devonian Anjiacha Formation, and are structurally controlled by the fault and anticline. The ore-forming process can be divided into three main stages, based on field geological features and mineral assemblages. The mineral assemblages of hydrothermal stage I are pale-yellow coarse grain, low Fe sphalerite, pyrite with pits, barite and biotite. The mineral assemblages of hydrothermal stage II are black-brown cryptocrystalline, high Fe shalerite, pyrite without pits, marcasite or arsenopyrite replace the pyrite with pits, K-feldspar. The features of hydrothermal stage III are calcite-quartz-sulfide vein cutting the laminated, banded ore body. Forty-two sulfur isotope analyses, twenty-five lead isotope analyses and nineteen carbon and oxygen isotope analyses were determined on sphalerite, pyrite, galena and calcite. The δ34 S values of stage I(20.3 to 29.0‰) are consistent with the δ34 S of sulfate(barite) in the stratum. Combined with geological feature, inclusion characteristics and EPMA data, we propose that TSR has played a key role in the formation of the sulfides in stage I. The δ34 S values of stage II sphalerite and pyrite(15.1 to 23.0‰) are between sulfides in the host rock, magmatic sulfur and the sulfate(barite) in the stratum. This result suggests that multiple S reservoirs were the sources for S2-in stage II. The δ34 S values of stage III(13.1 to 22‰) combined with the structure of the geological and mineral features suggest a magmatic hydrothermal origin of the mineralization. The lead isotope compositions of the sulfides have 206 Pb/204 Pb ranging from 17.9480 to 17.9782, 207 Pb/204 Pb ranging from 15.611 to 15.622, and 208 Pb/204 Pb ranging from 38.1368 to 38.1691 in the three ore-forming stages. The narrow and symmetric distributions of the lead isotope values reflect homogenization of granite and mantle sources before the Pb-Zn mineralization. The δ13 CPDB and δ18 OSMOW values of stage I range from-0.1 to 2.4‰ and from 18.8 to 21.7‰. The values and inclusion data indicate that the source of fluids in stage I was the dissolution of marine carbonate. The δ13 CPDB and δ18 OSMOW values of stage II range from-4 to 1‰ and from 12.3 to 20.3‰, suggesting multiple C-O reservoirs in the Changba deposit and the addition of mantle-source fluid to the system. The values in stage III are-3.1‰ and 19.7‰, respectively. We infer that the process of mineralization involved evaporitic salt and sedimentary organic-bearing units interacting through thermochemical sulfate reduction through the isotopic, mineralogy and inclusion evidences. Subsequently, the geology feature, mineral assemblages, EPMA data and isotopic values support the conclusion that the ore-forming hydrothermal fluids were mixed with magmatic hydrothermal fluids and forming the massive dark sphalerite, then yielding the calcite-quartz-sulfide vein ore type at the last stage. The genesis of this ore deposit was epigenetic rather than the previously-proposed sedimentary-exhalative(SEDEX) type.
基金supported by the Geological Survey Program of China Geological Survey (1212011121220)
文摘Magnetite, as a genetic indicator of ores, has been studied in various deposits in the world. In this paper, we present textural and compositional data of magnetite from the Qimantag metallogenic belt of the Kunlun Orogenic Belt in China, to provide a better understanding of the formation mechanism and genesis of the metallogenic belt and to shed light on analytical protocols for the in situ chemical analysis of magnetite. Magnetite samples from various occurrences, including the ore-related granitoid pluton, mineralised endoskarn and vein-type iron ores hosted in marine carbonate intruded by the pluton, were examined using scanning electron microscopy and analysed for major and trace elements using electron microprobe and laser ablation-inductively coupled plasma-mass spectrometry. The field and microscope observation reveals that early-stage magnetite from the Hutouya and Kendekeke deposits occurs as massive or banded assemblages, whereas late- stage magnetite is disseminated or scattered in the ores. Early-stage magnetite contains high contents of Ti, V, Ga, AI and low in Mg and Mn. In contrast, late-stage magnetite is high in Mg, Mn and low in Ti, V, Ga, AI. Most magnetite grains from the Qimantag metallogenic belt deposits except the Kendekeke deposit plot in the ＂ Skarn ＂ field in the Ca＋AI＋Mn vs Ti＋V diagram, far from typical magmatic Fe deposits such as the Damiao and Panzhihua deposits. According to the （MgO＋MnO）- TiO^-AI203 diagram, magnetite grains from the Kaerqueka and Galingge deposits and the No.7 ore body of the Hutouya deposit show typical characteristics of skarn magnetite, whereas magnetite grains from the Kendekeke deposit and the No.2 ore body of the Hutouya deposit show continuous elemental variation from magmatic type to skarn type. This compositional contrast indicates that chemical composition of magnetite is largely controlled by the compositions of magmatic fluids and host rocks of the ores that have reacted with the fluids. Moreover, a combination of petrography and magnetite geochemistry indicates that the formation of those ore deposits in the Qimantag metallogenic belt involved a magmatic-hydrothermal process.
基金supported by the National Key Research and Development Program of China(Grant No.2016YFC0600306)the National Natural Science Foundation of China(Grant Nos 41773042,41922022,41773043,41772088,91962105 and 41702082)+1 种基金the independent research project from Key Laboratory of DeepEarth Dynamics of the Ministry of Natural Resources(Grant No.J1901-6)the IGCP-662 program。
文摘The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu area in the middle part of the Sanjiang belt, and it represents a new style of MVT deposit that was controlled by karst structures in a thrust–fold system. Such a karst-controlled MVT Pb–Zn deposit in thrust settings has not previously been described in detail, and we therefore mapped the geology of the deposit and undertook a detailed study of its genesis. The karst structures that host the Jiamoshan deposit were formed in Triassic limestones along secondary reverse faults, and the orebodies have irregular tubular shapes. The main sulfide minerals are galena, sphalerite, and pyrite that occur in massive and lamellar form. The ore-forming fluids belonged to a Mg2+–Na+–K+–SO2-4–Cl-–F-–NO-3–H2 O system at low temperatures(120–130°C) but with high salinities(19–22% NaCl eq.). We have recognized basinal brine as the source of the ore-forming fluids on the basis of their H–O isotopic compositions(-145‰ to-93‰ for δDV-SMOW and-2.22‰ to 13.00‰ for δ18 Ofluid), the ratios of Cl/Br(14–1196) and Na/Br(16–586) in the hydrothermal fluids, and the C–O isotopic compositions of calcite(-5.0‰ to 3.7‰ for δ13 CV-PDB and 15.1‰ to 22.3‰ for δ18 OV-SMOW). These fluids may have been derived from evaporated seawater trapped in marine strata at depth or from Paleogene–Neogene basins on the surface. The δ34 S values are low in the galena(-3.2‰ to 0.6‰) but high in the barite(27.1‰), indicating that the reduced sulfur came from gypsum in the regional Cenozoic basins and from sulfates in trapped paleo-seawater by bacterial sulfate reduction. The Pb isotopic compositions of the galena samples(18.3270–18.3482 for 206 Pb/204 Pb, 15.6345–15.6390 for 207 Pb/204 Pb, and 38.5503–38.5582 for 208 Pb/204 Pb) are similar to those of the regional Triassic volcanic-arc rocks that formed during the closure of the Paleo-Tethys, indicating these arc rocks were the source of the metals in the deposit. Taking into account our new observations and data, as well as regional Pb–Zn metallogenic processes, we present here a new model for MVT deposits controlled by karst structures in thrust–fold systems.
文摘This study focuses on experiments of Au and Cu dissolved in vapor phase in hydrothermal fluids. Experiments prove that Au and Cu can re-distribute in vapor phase and liquid phase during separation of Au- and Cu-bearing supercritical fluids to vapor and liquid phases. These experimental results can illustrate some ore geneses, where boiling phenomena of ore fluids were found. Au- and Cubearing NaHCO3-HCl solutions were heated up to more than 350℃ in the main vessel, and then passed through a phase separator in a temperature range from 250℃ to 300℃, separated into vapor and liquid phases. We collected and analyzed the liquid and vapor samples separately, and found that Au and Cu dissolved and distributed in vapor phase. In some cases, the concentrations of Au and Cu in vapor are higher than those in liquid phase. Those experiments are used to interpret field observations of fluid inclusion data of some Au and Cu deposits, and demonstrate that some Au and Cu ore deposits are derived from metals transportation in vapor phase.
基金supported by the National Natural Science Foundation of China(Grant Nos.U1812402 and 41673056)。
文摘The Maoping Pb-Zn deposit(~3 Mt Pb+Zn reserves with grades of 12-30 wt%)is one of the largest Pb-Zn deposits in the Sichuan-Yunnan-Guizhou(SYG)metallogenic province,which has contributed a tremendous amount of lead and zinc resources for China.To obtain a further understanding of the sources of ore-forming materials and ore genesis of the deposit,S-Pb isotopes of sulfides and C-O isotopes of ore-stage calcites were systematically collected from representative orebodies at different elevations with a Finnigan MAT-253 mass spectrometer.The calcites separated from the sulfides of the NoⅠand NoⅡorebodies shared identical b13 CPDB values(-5.3 to-0.8‰)andδ18OSMOW values(+14.5 to+21.8‰)with those of the calcites in the SYG region,suggesting that CO2 in regional ore-forming fluids possibly had a homologous C-O source that originated from a ternary mixture of the dissolution of marine carbonate rocks,degassing process of the Emeishan mantle plume,and dehydroxylation of sedimentary organic matter.The No.Ⅰ-1 and No.Ⅰ-2 orebody was hosted in the same strata,but the sulfur source of No.Ⅰ-1 orebody(+13.1 to+19.0‰)with equilibrated sulfur fractionation(δ34Sspbaierite-<δ34Sgalena)and No.Ⅰ-2 orebody(+18.0 to+21.8‰)with sulfur equilibrium fractionation(δ34Sspnaierite>δ34-Sgalena)were different.They were derived from the allopatry thermochemical sulfate reduction(TSR)of overlying Carboniferous sulfates in the ore-hosting strata and local TSR of sulfates in the ore-bearing Upper Devonian Zaige Formation,respectively.The narrow and uniform Pb isotopic ratios of single galena grains collected from sulfides with 206Pb/204Pb of 18.713-18.759,207Pb/204Pb of 15.772-15.776 and 208Pb/204Pb of39.383-39.467 indicate a well-mixed metal source(s)that consist of Proterozoic Kunyang and Huili Group basement rocks and Devonian to Middle Permian ore-hosting sedimentary rocks.Besides,the late Permian Emeishan basalts are difficult to contribute metals for regional Pb-Zn mineralization despite a closely spatial relationship with the distribution of the Pb-Zn deposit.This is supported by Pb isotopic ratios plotting above the average upper crustal Pb evolution curves and staying far away from that of the agecorrected Emeishan basalts.Hence,taking into account of the similarities in tectonic setting,ore-hosting rock,ore assemblage,wall rock alteration,ore-controlling structure,and ore-forming materials and the differences in relationship with regional magmatism,fluid inclusion characteristic and ore grade between the Maoping deposit and typical MVT Pb-Zn deposit,the ore genesis of the Maoping deposit should be an MVT like Pb-Zn deposit.
基金supported by the Innovation–driven Plan of Central South University(Project 1053320180985)the National Natural Science Foundation of China(Grant No.41702078)
文摘The Shizitou molybdenum （Mo） deposit in Yongping, Jiangxi, is an important, recently discovered deposit in the eastern section of the Qin-Hang metallogenic belt. The Mo deposit is located in the outer contact zone behveen the porphyritic biotite granite and the Neoproterozoic migmatite, and present in the deep central part of the intrusion. Re-Os dating and S and Pb isotopic analysis have been conducted to assess the metallogenesis of the Shizitou Mo deposit. S, Pb and Re isotopes show that the ore-forming materials were derived from the porphyritic biotite granitic magma, which originated from the mixing of mantle and crust. Re-Os dating of molybdenite from the ores gives a model age from 156.9±2.2 to 158.5±2.4 Ma, with a weighted mean age of 158±1 Ma and an isochron age of 158.0±2.5 Ma. Geological and geochemical characteristics of the ore deposit and the related granitoids indicate that the Shizitou deposit is a Climax-type Mo deposit. Based on previous studies of the Qin-Hang metaliogenic belt, two metallogenic events are believed to have occurred during 172-145 Ma and 137-132 Ma. These two metallogenic periods are consistent with the timing of two metallogenic peaks during the middle to late Jurassic and the Cretaceous in South China. These events represent responses to the partial backarc extension associated with the subduction of the Izanagi plate beneath the Eurasian continent and the rapid northeastward movement of the subducting Izanagi plate.
基金financially supported by the State Key Fundamental Research Project of China(2012CB476505)the 12th Five-Year Plan project of the National Science & Technology Pillar Program(2011BAB04B02)+1 种基金the Frontier Program(Y3CJ001000)from the Institute of Geochemistry,Chinese Academy of Sciencesthe Frontier Program(Y3KJA20001)from the State Key Laboratory of Ore Deposit Geochemistry
文摘The Tongcun Mo（Cu） deposit in Kaihua city of Zhejiang Province,eastern China,occurs in and adjacent to the Songjiazhuang granodiorite porphyry and is a medium-sized and important porphyry type ore deposit.Two irregular Mo（Cu） orebodies consist of various types of hydrothermal veinlets.Intensive hydrothermal alteration contains skarnization,chloritization,carbonatization,silicification and sericitization.Based on mineral assemblages and crosscutting relationships,the oreforming processes are divided into five stages,i.e.,the early stage of garnet ＋ epidote ± chlorite associated with skarnization and K-feldspar ＋ quartz ± molybdenite veins associated with potassicsilicic alteration,the quartz-sulfides stage of quartz ＋ molybdenite ± chalcopyrite ± pyrite veins,the carbonatization stage of calcite veinlets or stockworks,the sericite ＋ chalcopyrite ± pyrite stage,and the late calcite ＋ quartz stage.Only the quartz-bearing samples in the early stage and in the quartzsulfides stage are suitable for fluid inclusions（FIs） study.Four types of FIs were observed,including1） CO2-CH4 single phase FIs,2） CO2-bearing two- or three-phase FIs,3） Aqueous two-phase FIs,and4） Aqueous single phase FIs.FIs of the early stages are predominantly CO2- and CH4-rich FIs of the CO2-CH4-H2O-NaCl system,whereas minerals in the quartz-sulfides stage contain CO2-rich FIs of the CO2-H2O-NaCl system and liquid-rich FIs of the H2O-NaCl system.For the CO2-CH4 single phase FIs of the early mineralization stage,the homogenization temperatures of the CO2 phase range from 15.4 ℃ to 25.3 ℃（to liquid）,and the fluid density varies from 0.7 g/cm^3 to 0.8 g/cm^3;for two- or three-phase FIs of the CO2-CH4-H2O-NaCl system,the homogenization temperatures,salinities and densities range from 312℃ to 412℃,7.7 wt%NaCl eqv.to 10.9 wt%NaCl eqv.,and 0.9 g/cm^3 to 1.0 g/cm^3,respectively.For CO2-H2O-NaCI two- or threephase FIs of the quartz-sulfides stage,the homogenization temperatures and salinities range from255℃ to 418℃,4.8 wt%NaCl eqv.to 12.4 wt%NaCl eqv.,respectively;for H2O-NaCl two-phase FIs,the homogenization temperatures range from 230 ℃ to 368 ℃,salinities from 11.7 wt%NaCl eqv.to16.9 wt%NaCl eqv.,and densities from 0.7 g/cm^3 to 1.0 g/cm^3.Microthermometric measurements and Laser Raman spectroscopy analyses indicate that CO2 and CH4 contents and reducibility（indicated by the presence of CH4） of the fluid inclusions trapped in quartz-sulfides stage minerals are lower than those in the early stage.Twelve molybdenite separates yield a Re-Os isochron age of 163 ± 2.4 Ma,which is consistent with the emplacement age of the Tongcun,Songjiazhuang,Dayutang and Huangbaikeng granodiorite porphyries.The 〈S18OSMow values of fluids calculated from quartz of the quartz-sulfides stage range from 5.6‰ to 8.6‰,and the 〈JDSMOw values of fluid inclusions in quartz of this stage range from-71.8‰ to-88.9‰,indicating a primary magmatic fluid source.〈534SV-cdt values of sulfides range from＋1.6‰ to ＋3.8‰,which indicate that the sulfur in the ores was sourced from magmatic origins.Phase separation is inferred to have occurred from the early stage to the quartz-sulfides stage and resulted in ore mineral precipitation.The characteristics of alteration and mineralization,fluid inclusion,sulfur and hydrogen-oxygen isotope data,and molybdenite Re-Os ages all suggest that the Tongcun Mo（Cu） deposit is likely to be a reduced porphyry Mo（Cu） deposit associated with the granodiorite porphyry in the Tongcun area.
基金financially supported by the Geological Survey Program of China Geological Survey Bureau(Grant No.12120114016601)。
文摘The Huayuan Pb-Zn ore district in China,located in western Hunan Province,is a giant carbonate-hosted Pb-Zn ore district.The source of ore-forming brines in this ore district remains poorly constrained.Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated.Carbonate minerals associated with Pb-Zn mineralization haveδ^(13)CV-PDB andδ^(18)OV-SMOW values ranging from−5.55‰to+1.35‰(mean value of−0.69‰;n=14)and+16.28‰to+25.05‰(mean value of+20.22‰;n=14),respectively.This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks.Theδ^(34)S values of sulfides range from+20.2‰to+36.8‰,with an average value of+30.0‰(n=27).These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate.The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384,and Na/Br molar ratios from 39 to 160(n=8).These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater(657 to 564),but are consistent with bittern brines through early halite precipitation.We propose that ore-forming fluids are mainly derived from evaporitic basin brines,which leached base metals from the basement and/or country rocks.The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sulfides by thermochemical sulfate reduction.
文摘This paper demonstrates the channels and methods for location prognosis of concealed ore deposits (bodies) in the deep seated and surrounding districts of productive mines in accordance with their special features. The system frame map is built, from quick exploration in the field to the rapid building of a model indoors. The main research points of location prognosis are also discussed in the paper, which include: 1) integrating the location with the surrounding geological areas, microscopic with macroscopic; 2) analyzing and synthesizing all geological information of different levels, depths and aspects; 3) laying stress on mineralization series; 4) paying attention to the study of the distribution law of ore bodies; 5) introducing the theory of nonlinear dynamics of ore forming processes to ordinary static prognosis; 6) the necessity of the geophysical me thod in recovering information of concealed ore bodies; 7) the combination of all kinds of geology, geophysics, geochemistry and remote sensing methods.
文摘In the Xinchang-Yongjia silver (lead-zinc) ore belt, there mainly occur the large to medium-sized Haoshi, Bamao, Dalingkou and Wubu silver deposits or silver-bearing lead-zinc deposits. On the basis of researches on these typical deposits, the mechanism of leaching-drawing mineralization of Mesozoic geothermal water and the related model are put forward in this paper in the light of the time interval between rock and formation ages as well as hydrogen, oxygen, sulphur and lead isotope geochemical characteristics. The major metallogenic process occurred in volcanic rock layers. The ore-forming fluids are geothermal water coming from meteoric water and circulating at shallow layers. This geothermal water leached and absorbed ore-forming materials from its country rocks during its flowing (such metallogenic elements as silver, lead-zinc and sulphur mainly came from consolidated volcanic rocks), leading to the formation of meso - epithermal silver deposits.
基金supported by Science Foundation of Guizhou province (No. 2012-2334)Open Foundation of State Key Laboratory of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences (Nos. 2011001 and 2009014)National Natural Science Foundation of China (Nos. 41102055 and 41102053)
文摘The Nage Cu-Pb deposit, a new found ore deposit in the southeast Guizhou province, southwest China, is located on the southwestern margin of the Jiangnan Orogenic Belt. Ore bodies are hosted in slate and phyllite of Neoproterozoic Jialu and Wuye Formations, and are structurally controlled by EW-trending fault. It contains Cu and Pb metals about 0.12 million tonnes with grades of 0.2 wt% to 3.4 wt% Cu and 1.1 wt% to 9.27 wt% Pb. Massive and disseminated Cu-Pb ores from the Nage deposit occur as either veinlets or disseminations in silicified rocks. The ore minerals include chalcopyrite, galena and pyrite, and gangue minerals are quartz, sericite and chlorite. The H-O isotopic compositions of quartz, S-Cu-Pb isotopic compositions of sulfide minerals, Pb isotopic compositions of whole rocks and ores have been analyzed to trace the sources of ore-forming fluids and metals for the Nage Cu-Pb deposit. The oSCUNBs values of chalcopyrite range from -0.09% to ＋0.33%0, similar to basic igneous rocks and chalcopyrite from magmatic deposits. J6SCUNBS values of chalcopyrite from the early, middle and final mineralization stages show an increasing trend due to 63Cu prior migrated in gas phase when fluids exsolution from magma, ja4ScDT values of sulfide minerals range from -2.7‰ to ＋2.8‰, similar to mantle-derived sulfur （0±3‰）. The positive correlation between J65CUNBs and ja4SCDT values of chalcopyrite indicates that a common source of copper metal and sulfur from magma. JDu2o- SMOW and JlSOH2O-SMOW values of water in fluid inclusions of quartz range from -60.7‰ to -44.4‰ and ＋7.9‰ to ＋9.0%0 （T=260℃）, respectively and fall in the field for magmatic and metamorphic waters, implicating that mixed sources for H20 in hydrothermal fluids. Ores and sulfide minerals have a small range of Pb isotopic compositions （208Pb/204pb=38.152 to 38.384, 207Pb/204Pb=15.656 to 17.708 and 206Pb/204Pb=17.991 to 18.049） that are close to orogenic belt and upper crust Pb evolution curve, and similar to Neoproterozoic host rocks （208Pb/204Pb=38.201 to 38.6373, 207pb/204pb=15.648 to 15.673 and 206pb/204pb=17.820 to 18.258）, but higher than diabase （208Pb/204pb=37.830 to 38.012, 207pb/204pb=15.620 to 15.635 and 206pb/204pb=17.808 to 17.902）. These results imply that the Pb metal originated mainly from host rocks. The H-O-S-Cu-Pb isotopes tegather with geology, indicating that the ore genesis of the Nage Cu-Pb deposit is post-magmatic hydrothermal type.
