In this study,a single-doped phosphors yttrium aluminum garnet(Y_(3)Al_(5)O_(12),YAG):Ce^(3+),single-doped YAG:Sc^(3+),and double-doped phosphors YAG:Ce^(3+),Sc^(3+) were prepared by spark plasma sintering(SPS)(lower ...In this study,a single-doped phosphors yttrium aluminum garnet(Y_(3)Al_(5)O_(12),YAG):Ce^(3+),single-doped YAG:Sc^(3+),and double-doped phosphors YAG:Ce^(3+),Sc^(3+) were prepared by spark plasma sintering(SPS)(lower than 1 200℃).The characteristics of synthesized phosphors were determined using scanning electron microscopy(SEM),X-ray diffraction(XRD),and fluorescence spectroscopy.During SPS,the lattice structure of YAG was maintained by the added Ce^(3+) and Sc^(3+).The emission wavelength of YAG:Ce^(3+) prepared from SPS(425-700 nm) was wider compared to that of YAG:Ce^(3+) prepared from high-temperature solid-state reaction(HSSR)(500-700 nm).The incorporation of low-dose Sc^(3+) in YAG:Ce^(3+) moved the emission peak towards the short wavelength.展开更多
Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The ...Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The experimental results show that,by using 0.06%TIPA,the compressive strength of cement containing 60%PS or 60%SS could be enhanced by 12%or 18%at 28 d.The presence of TIPA significantly affected the hydration process of PS and SS in cement.In the early stage,TIPA accelerated the dissolution of Al in PS,and the formation of carboaluminate hydrate was facilitated,which could induce the hydration;TIPA promoted the dissolution of Fe in SS,and the formation of Fe-monocarbonate,which was precipitated on the surface of SS,resulting in the postponement of hydration,especially for the high SS content.In the later stage,under the continuous solubilization effect of TIPA,the hydration of PS and SS could refine the pore structure.It was noted that compared with portland cement,the carbon emissions of cement-PS-TIPA and cement-SS-TIPA was reduced by 52%and 49%,respectively.展开更多
The phosphors of KY_(1-x)(MoO_(4))_(2-y)(WO_(4))y:xLn^(3+)(Ln^(3+)=Tm^(3+),Dy^(3+),Eu^(3+))were synthesized by using a sol-gel method.Then,the crystal structure,luminescence properties,energy transfer,and white emissi...The phosphors of KY_(1-x)(MoO_(4))_(2-y)(WO_(4))y:xLn^(3+)(Ln^(3+)=Tm^(3+),Dy^(3+),Eu^(3+))were synthesized by using a sol-gel method.Then,the crystal structure,luminescence properties,energy transfer,and white emission of the prepared materials were researched.The molar ratio of the anion group on the photoluminescence(PL)emission and excitation intensity were investigated,revealing that the optimum intensity could be obtained by using=3:1.The optimal Dy^(3+) doping concentration of KY(MoO_(4))1.5(WO4)0.5was obtained.In addition,the color-tunable emissions of Dy^(3+)/Eu^(3+)-codoped KY(MoO_(4))1.5(WO4)0.5phosphors were observed because of the effective energy transfer(ET)from Dy^(3+)to Eu^(3+)ions.Finally,by doping appropriate concentrations of Tm^(3+),Dy^(3+),and Eu^(3+)and different concentrations of(WO_(4))^(2-),white light emitting phosphors KY_(0.92)(WO_(4))2:0.01Tm^(3+),0.06Dy^(3+),0.01Eu^(3+)with excellent color-rending properties were obtained.The chromaticity coordinate was calculated as(x=0.3238,y=0.3173),closing to the artificial daylight(D65,x=0.313,y=0.329)illuminant,and which indicates the potential application of near ultraviolet White light-emitting diodes(WLEDs).展开更多
Doping in Si nanocrystals is an interesting topic and directly studying the distribution of dopants in phosphorous/boron co-doping is an important issue facing the scientific community.In this study,atom probe tomogra...Doping in Si nanocrystals is an interesting topic and directly studying the distribution of dopants in phosphorous/boron co-doping is an important issue facing the scientific community.In this study,atom probe tomography is performed to study the structures and distribution of impurity in phosphorous/boron co-doped Si nanocrystals/SiO_(2) multilayers.Compared with phosphorous singly doped Si nanocrystals,it is interesting to find that the concentration of phosphorous in co-doped samples can be significantly improved.Theoretical simulation suggests that phosphorous-boron pairs are formed in co-doped Si nanocrystals with the lowest formation energy,which also reduces the formation energy of phosphorous in Si nanocrystals.The results indicate that co-doping can promote the entry of phosphorous impurities into the near-surface and inner sites of Si nanocrystals,which provides an interesting way to regulate the electronic and optical properties of Si nanocrystals such as the observed enhancement of conductivity and sub-band light emission.展开更多
Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices...Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices such as white light emitting diode(W-LED),plant cultivation LED,and temperature thermometer.Up to now,Mn^(4+)has been widely introduced into the lattices of various inorganic hosts for brightly redemitting phosphors.However,how to correlate the structure-activity relationship between host framework,luminescence property,and photoelectric device is urgently demanded.In this review,we thoroughly summarize the recent advances of Mn^(4+)doped phosphors.Meanwhile,several strategies like co-doping and defect passivation for improving Mn^(4+)emission are also discussed.Most importantly,the relationship between the protocols for tailoring the structures of Mn^(4+)doped phosphors,increased luminescence performance,and the targeted devices with efficient photoelectric and energy conversion efficiency is deeply correlated.Finally,the challenges and perspectives of Mn^(4+)doped phosphors for practical applications are anticipated.We cordially anticipate that this review can deliver a deep comprehension of not only Mn^(4+)luminescence mechanism but also the crystal structure tailoring strategy of phosphors,so as to spur innovative thoughts in designing advanced phosphors and deepening the applications.展开更多
The efficient separation of amphoteric organic compounds from dilute solutions is of great importance in the industrial field. In the present work, the reactive extractions of 4-hydroxypyridine(4-HP) with tributyl pho...The efficient separation of amphoteric organic compounds from dilute solutions is of great importance in the industrial field. In the present work, the reactive extractions of 4-hydroxypyridine(4-HP) with tributyl phosphate(TBP), di(2-ethylhexyl) phosphoric acid(D2EHPA) and TBP + D2EHPA dissolved in 1-octanol were investigated, respectively. The influences of the initial concentrations of TBP, D2EHPA and TBP + D2EHPA on distribution ratio(D) were discussed, as well as the reactive extraction mechanism were proposed. The obvious intensification effect was observed when the mixture of TBP and D2EHPA was used as extractant. The best extraction conditions were found to be of the molar ratio of D2EHPA and TBP at 2:1 and the equilibrium aqueous pH at 3.50-4.50. D values increased with the increase of the total concentration of TBP and D2EHPA in 1-octanol. Especially, the analysis on the extraction mechanisms clearly indicate(i) TBP in 1-octanol shows negligible reactive extraction toward 4-HP,(ii) D2EHPA in 1-octanol exhibits moderate extraction effect by forming 4-HP:D2EHPA(1:1) and 4-HP:2D2EHPA(1:2) type complexes, while(iii) D2EHPA in TBP/1-octanol demonstrates the maximum distribution ratio with the 4-HP:D2EHPA(1:1) type complex domination. The discussion provides new insights on the mechanism and opens a new way for the intensified extraction of amphoteric organic compounds by using the mixture of multiple extractants in the diluent.展开更多
Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to i...Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to its low solubility in aqueous electrolytes.Herein,we propose phosphorus-activated Cu electrocatalysts to generate electron-deficient Cu sites on the catalyst surface to promote the adsorption of N_(2) molecules.The eNRR system is further modified using a gas diffusion electrode(GDE) coated with polytetrafluoroethylene(PTFE) to form an effective three-phase boundary of liquid water-gas N_(2)-solid catalyst to facilitate easy access of N_(2) to the catalytic sites.As a result,the new catalyst in the flow-type cell records a Faradaic efficiency of 13.15% and an NH_(3) production rate of 7.69 μg h^(-1) cm^(-2) at-0.2 V_(RHE),which represent 3.56 and 59.2 times increases from those obtained with a pristine Cu electrode in a typical electrolytic cell.This work represents a successful demonstration of dual modification strategies;catalyst modification and N_(2) supplying system engineering,and the results would provide a useful platform for further developments of electrocatalysts and reaction systems.展开更多
Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH&l...Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH<sub>4</sub>HF<sub>2</sub> and HCl instead of highly toxic HF. The K3</sub>MoO2</sub>F<sub>5</sub><sup>.</sup><sub></sub>2H2</sub>O:Mn4+</sup> phosphor has a blocky structure and exhibits sharp red emission at the range of 580 to 670 nm excited by the blue light at 470 nm. The fabricated WLED device at 20 mA current has low correlation color temperature (CCT = 3608 K) and high color rendering index (Ra = 90.1), which can significantly improve the electroluminescence performance of cold WLED devices. These results indicate that the K3</sub>MoO2</sub>F5</sub><sup>.</sup>2H2</sub>O:Mn4+</sup> phosphor has potential application value in warm WLED excited by blue light chip. .展开更多
To achieve stable and efficient nitrogen and phosphorus removal and to investigate the characteristics of the A/A SBR enriched with denitrifying phosphorus removal bacteria(DPB),the whole course of startup was studied...To achieve stable and efficient nitrogen and phosphorus removal and to investigate the characteristics of the A/A SBR enriched with denitrifying phosphorus removal bacteria(DPB),the whole course of startup was studied with two reactors operated in different mode.The reactor I was operated under anaerobic/settling/anoxic/settling mode,and the reactor II was operated under anaerobic/anoxic/settling mode.Differences between the two reactors in removal efficiency of COD,nitrogen and phosphorus were examined.The results indicated that efficient performance could be achieved in both reactors with different startup operation mode,while the phosphorus removal efficiency was improved sooner in reactor I than in reactor II,which suggested that reactor I would supply a more favorable condition for DPB proliferation.Meanwhile,it was observed that the amount of organic substrates consumption had a linear correlation to that of phosphorus release in anaerobic phase when DPB was accumulated in the A/A SBR denitrifying phosphorus removal system.展开更多
Most of the commercial white LED lamps use blue chip coated with yellow emitting phosphor. YAG:Ce3+ phosphor is coated on blue chip to obtain white light. Though this is commercially successful, there are several draw...Most of the commercial white LED lamps use blue chip coated with yellow emitting phosphor. YAG:Ce3+ phosphor is coated on blue chip to obtain white light. Though this is commercially successful, there are several drawbacks such as “halo effect”, poor colour rendition, etc. In recent years several efforts have been made to improve LED lamp performance. In this paper modifica-tion of YAG:Ce phosphor for improving CRI, by introducing Gd3+, Pr3+ or Tb3+ at Ce3+ site is reported.展开更多
Ultra-fine Ce:YAG phosphors were prepared by homogeneous precipitation under microwave irradiation method. The formation of Ce:YAG was investigated by means of XRD and DTA/TG. The purified YAG crystallized phase was o...Ultra-fine Ce:YAG phosphors were prepared by homogeneous precipitation under microwave irradiation method. The formation of Ce:YAG was investigated by means of XRD and DTA/TG. The purified YAG crystallized phase was obtained at a lower temperature (1100 ℃). Basically spherical Ce:YAG powders were indicated from TEM images, and the size of the particles is about 80 nm. Two peaks of 436 and 473 nm can be seen from the excitation spectrum in the range of 402～510 nm. A broad emission band located at 480～630 nm shows the phosphors prepared by this method have good emission properties.展开更多
Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation ex...Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation exchange resin for iron removal from phosphoric acid. The specific surface area and the total exchange capacity of resin were 8.91 m2·g-1 and 5.18 mmol·g-1, respectively. The sorption mechanism was determined by FTIR and XPS and the results indicated that iron was combined with-SO3 H in resin. The removal process was studied as a function of temperature, H3 PO4 content and mass ratio between resin and solution. The unit mass of resin to remove iron was 0.058 g·g-1 resin when the operating parameters were T = 50 ℃, H3 PO4 content = 27.61 wt%and S/L = 0.1, respectively. Kinetics study demonstrated that pseudo-second-order reaction model fits this study best and the calculated activation energy of overall reaction is 29.10 kJ·mol-1. The overall reaction process was mainly controlled by pore diffusion.展开更多
The new phosphors Bi2ZnB2O7:Ln3+ (Ln3+=Eu3+,Dy3+) were synthesized by solid-state reaction technique.The obtained phosphors were investigated by means of X-ray powder diffraction (XRD),photoluminescence excitation and...The new phosphors Bi2ZnB2O7:Ln3+ (Ln3+=Eu3+,Dy3+) were synthesized by solid-state reaction technique.The obtained phosphors were investigated by means of X-ray powder diffraction (XRD),photoluminescence excitation and emission spectra with the aim of enhancing the fundamental knowledge about the luminescent properties of Eu3+ and Dy3+ ions in the Bi2ZnB2O7 host lattice.XRD analysis shows that all these compounds are of a single phase of Bi2ZnB2O7.The excitation and emission spectra of Bi2ZnB2O7:Ln3+ (Ln3+=Eu3+,Dy3+) at room temperature show the typical 4f-4f transitions of Eu3+ and Dy3+,respectively.The hypersensitive transitions of 5D0→7F2 (Eu3+) and 4F9/2→6H13/2 (Dy3+) are relatively higher than those of the insensitive transitions in Bi2ZnB2O7.It is conceivable that the Bi2ZnB2O7 structure provides asymmetry sites for activators (Eu3+,Dy3+).The optimum concentrations of Eu3+ and Dy3+ ions in Bi2ZnB2O7 phosphors are both x=0.05.展开更多
YAG:Ce phosphor was synthesized by a novel simple method,wherein the admixture of three raw materials(Y2O3,α-Al2O3 and CeO2) were first acidified by diluted nitric acid to prepare a precursor,followed by a high tempe...YAG:Ce phosphor was synthesized by a novel simple method,wherein the admixture of three raw materials(Y2O3,α-Al2O3 and CeO2) were first acidified by diluted nitric acid to prepare a precursor,followed by a high temperature heating treatment of the obtained precursor under reductive atmosphere.Through XRD measurement and SEM observation,it was found that Y2O3,one of the raw material,was firstly dissolved into the diluted nitric acid,and then recrystallized on the surface of both α-Al2O3 and CeO2 to form a novel nano-flaky hierarchical architectures with the crystalline structure of yttrium nitrate hydroxide hydrates,which makes all the precursor more homogeneous than the admixture of the raw materials from simple mechanical blending method.In the following heating process,the obtained homogeneous admixtures with hierarchical architectures could easily transform into uniform YAG:Ce phosphor.The resulted YAG:Ce phosphor exhibited higher emission intensity than the sample synthesized from mechanical mixing raw materials.展开更多
The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamenta...The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamental mechanism for selective LGO formation is unclear.Herein,quantum chemistry calculations and catalytic fast pyrolysis experiments were performed to reveal the formation mechanism of LGO in H3PO4-catalyzed cellulose pyrolysis.H3PO4 significantly decreased the energy barriers of the pyrolytic reactions and altered the competitiveness of the LGO formation pathways,promoting LGO formation.Through different pathways in the non-catalytic and H3P04-catalyzed conditions,LGO is mainly produced from the primary decomposition of glucose units of cellulose and secondary conversion of levoglucosan.The major catalytic formation pathways of LGO comprise similar reactions,with dehydration at the 3-OH+2-H site as the rate-determining step.Importantly,secondary conversion of 1,4;3,6-dianhydro-α-D-glucopyranose is not feasible for LGO formation,in contrast to previous reports.In addition,a high degree of polymerization is beneficial for the selectivity of LGO formation in the catalytic process,because the glycosidic bond is important for the formation of the bicyclic structure (1,5-and1,6-acetal rings).展开更多
CaAl2O4:Eu3+,R+(R=Li+,Na+,K+) red phosphors were synthesized by solid state reaction method.X-ray diffraction(XRD) and photoluminescence(PL) were employed to characterize their structural and luminescent properties.It...CaAl2O4:Eu3+,R+(R=Li+,Na+,K+) red phosphors were synthesized by solid state reaction method.X-ray diffraction(XRD) and photoluminescence(PL) were employed to characterize their structural and luminescent properties.It was found that the optimal sintering temperature and sintering time were 1200 °C and 4 h,respectively.The optimal concentration of doped Eu3+ was 3 mol.%.Furthermore,under ultraviolet excitation with a wavelength of 254 nm,these samples showed red luminescence which were probably attributed to the transitions from 5D0 excited state to 7FJ(J=0-4) ground states of Eu3+ ions.The feature and the high intensity of hypersensitive transition from 5D0→7F2 indicated that Eu3+ preferred to occupy a low symmetry site.The incorporation of alkali metal ions greatly enhanced the luminescence intensity probably due to the influence of charge compensation of alkali metal ions.展开更多
Eu-activated CaMoO4 phosphors were co-precipitated in an aqueous solution, and NH3·H2O, NH4HCO3 and (NH2)2CO as pre-cipitating aid agents were compared based on the morphology and particle size distribution of th...Eu-activated CaMoO4 phosphors were co-precipitated in an aqueous solution, and NH3·H2O, NH4HCO3 and (NH2)2CO as pre-cipitating aid agents were compared based on the morphology and particle size distribution of the phosphor samples. Sm3+ as sensitizer ion was investigated on the luminescence of CaMoO4:Eu, and it could strengthen the 406 nm absorption of this phosphor. At last, the scheelite CaMoO4:Eu and wolframite ZnMoO4:Eu were selected to compare their host absorption. The result showed that the scheelite molybdate host exhibited stronger UV absorption than wolframite one.展开更多
Phosphors of yttrium aluminium garnet activated by cerium ion, a kind of yellow luminescent materials for white LED lighting, were synthesized via solid-state reaction route in air and then reducing atmospheres.Therma...Phosphors of yttrium aluminium garnet activated by cerium ion, a kind of yellow luminescent materials for white LED lighting, were synthesized via solid-state reaction route in air and then reducing atmospheres.Thermal analysis was conducted by DTA/TGA.Moreover, XRD patterns of phosphors show that pure cubic phase of Y3 Al5 O12 is formed.Microstructures of the powders were observed by SEM.Luminescent spectra of the phosphors were also characterized by a spectrophotometer.The effect of sintering time on excitation and emission properties of the YAG: Ce3+ powders were systematically studied, resulting a best range of sintering time, 300 ～ 400 min, for maximal relative luminescent intensity.展开更多
基金Funded by the Primary Research and Development Plan of Jiangsu Province(No.BE2016175)。
文摘In this study,a single-doped phosphors yttrium aluminum garnet(Y_(3)Al_(5)O_(12),YAG):Ce^(3+),single-doped YAG:Sc^(3+),and double-doped phosphors YAG:Ce^(3+),Sc^(3+) were prepared by spark plasma sintering(SPS)(lower than 1 200℃).The characteristics of synthesized phosphors were determined using scanning electron microscopy(SEM),X-ray diffraction(XRD),and fluorescence spectroscopy.During SPS,the lattice structure of YAG was maintained by the added Ce^(3+) and Sc^(3+).The emission wavelength of YAG:Ce^(3+) prepared from SPS(425-700 nm) was wider compared to that of YAG:Ce^(3+) prepared from high-temperature solid-state reaction(HSSR)(500-700 nm).The incorporation of low-dose Sc^(3+) in YAG:Ce^(3+) moved the emission peak towards the short wavelength.
基金Funded by the Key Public Welfare Special Project of Henan Province(No.201300311000)the Major Technical Innovation Project in Hubei Province of China(No.2020BED025)。
文摘Cement,phosphorous slag(PS),and steel slag(SS)were used to prepare low-carbon cementitious materials,and triisopropanolamine(TIPA)was used to improve the mechanical properties by controlling the hydration process.The experimental results show that,by using 0.06%TIPA,the compressive strength of cement containing 60%PS or 60%SS could be enhanced by 12%or 18%at 28 d.The presence of TIPA significantly affected the hydration process of PS and SS in cement.In the early stage,TIPA accelerated the dissolution of Al in PS,and the formation of carboaluminate hydrate was facilitated,which could induce the hydration;TIPA promoted the dissolution of Fe in SS,and the formation of Fe-monocarbonate,which was precipitated on the surface of SS,resulting in the postponement of hydration,especially for the high SS content.In the later stage,under the continuous solubilization effect of TIPA,the hydration of PS and SS could refine the pore structure.It was noted that compared with portland cement,the carbon emissions of cement-PS-TIPA and cement-SS-TIPA was reduced by 52%and 49%,respectively.
文摘The phosphors of KY_(1-x)(MoO_(4))_(2-y)(WO_(4))y:xLn^(3+)(Ln^(3+)=Tm^(3+),Dy^(3+),Eu^(3+))were synthesized by using a sol-gel method.Then,the crystal structure,luminescence properties,energy transfer,and white emission of the prepared materials were researched.The molar ratio of the anion group on the photoluminescence(PL)emission and excitation intensity were investigated,revealing that the optimum intensity could be obtained by using=3:1.The optimal Dy^(3+) doping concentration of KY(MoO_(4))1.5(WO4)0.5was obtained.In addition,the color-tunable emissions of Dy^(3+)/Eu^(3+)-codoped KY(MoO_(4))1.5(WO4)0.5phosphors were observed because of the effective energy transfer(ET)from Dy^(3+)to Eu^(3+)ions.Finally,by doping appropriate concentrations of Tm^(3+),Dy^(3+),and Eu^(3+)and different concentrations of(WO_(4))^(2-),white light emitting phosphors KY_(0.92)(WO_(4))2:0.01Tm^(3+),0.06Dy^(3+),0.01Eu^(3+)with excellent color-rending properties were obtained.The chromaticity coordinate was calculated as(x=0.3238,y=0.3173),closing to the artificial daylight(D65,x=0.313,y=0.329)illuminant,and which indicates the potential application of near ultraviolet White light-emitting diodes(WLEDs).
基金Project supported by the National Key Research and Development Program of China (Grant No.2018YFB2200101)the National Natural Science Foundation of China (Grant Nos.62004078 and 61921005)+4 种基金Natural Science Foundation of Jiangsu Province (Grant No.BK20201073)Natural Science Foundation of Ningbo (Grant No.2021J068)ANR DONNA (Grant No.ANR-18-CE09-0034)Leading Innovative and Entrepreneur Team Introduction Program of Hangzhou (Grant No.TD2022012)partially supported by the CNRS Federation IRMA-FR 3095。
文摘Doping in Si nanocrystals is an interesting topic and directly studying the distribution of dopants in phosphorous/boron co-doping is an important issue facing the scientific community.In this study,atom probe tomography is performed to study the structures and distribution of impurity in phosphorous/boron co-doped Si nanocrystals/SiO_(2) multilayers.Compared with phosphorous singly doped Si nanocrystals,it is interesting to find that the concentration of phosphorous in co-doped samples can be significantly improved.Theoretical simulation suggests that phosphorous-boron pairs are formed in co-doped Si nanocrystals with the lowest formation energy,which also reduces the formation energy of phosphorous in Si nanocrystals.The results indicate that co-doping can promote the entry of phosphorous impurities into the near-surface and inner sites of Si nanocrystals,which provides an interesting way to regulate the electronic and optical properties of Si nanocrystals such as the observed enhancement of conductivity and sub-band light emission.
基金financially supported by the National Natural Science Foundation of China(52072101,51972088,U20A20122 and U1663225)the Program for Changjiang Scholars and Innovative Research Team in University(IRT_15R52)of the Chinese Ministry of Education+2 种基金the Program of Introducing Talents of Discipline to Universities-Plan 111(Grant No.B20002)from the Ministry of Science and Technology and the Ministry of Education of ChinaHubei Provincial Department of Education for the“Chutian Scholar”programsupported by the European Commission Interreg V FranceWallonie-Vlaanderen project“Depollut Air”。
文摘Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions,Mn^(4+)ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices such as white light emitting diode(W-LED),plant cultivation LED,and temperature thermometer.Up to now,Mn^(4+)has been widely introduced into the lattices of various inorganic hosts for brightly redemitting phosphors.However,how to correlate the structure-activity relationship between host framework,luminescence property,and photoelectric device is urgently demanded.In this review,we thoroughly summarize the recent advances of Mn^(4+)doped phosphors.Meanwhile,several strategies like co-doping and defect passivation for improving Mn^(4+)emission are also discussed.Most importantly,the relationship between the protocols for tailoring the structures of Mn^(4+)doped phosphors,increased luminescence performance,and the targeted devices with efficient photoelectric and energy conversion efficiency is deeply correlated.Finally,the challenges and perspectives of Mn^(4+)doped phosphors for practical applications are anticipated.We cordially anticipate that this review can deliver a deep comprehension of not only Mn^(4+)luminescence mechanism but also the crystal structure tailoring strategy of phosphors,so as to spur innovative thoughts in designing advanced phosphors and deepening the applications.
基金supported by the Science and Technology Research Project of Henan Province (192102310490 and 212102310505)。
文摘The efficient separation of amphoteric organic compounds from dilute solutions is of great importance in the industrial field. In the present work, the reactive extractions of 4-hydroxypyridine(4-HP) with tributyl phosphate(TBP), di(2-ethylhexyl) phosphoric acid(D2EHPA) and TBP + D2EHPA dissolved in 1-octanol were investigated, respectively. The influences of the initial concentrations of TBP, D2EHPA and TBP + D2EHPA on distribution ratio(D) were discussed, as well as the reactive extraction mechanism were proposed. The obvious intensification effect was observed when the mixture of TBP and D2EHPA was used as extractant. The best extraction conditions were found to be of the molar ratio of D2EHPA and TBP at 2:1 and the equilibrium aqueous pH at 3.50-4.50. D values increased with the increase of the total concentration of TBP and D2EHPA in 1-octanol. Especially, the analysis on the extraction mechanisms clearly indicate(i) TBP in 1-octanol shows negligible reactive extraction toward 4-HP,(ii) D2EHPA in 1-octanol exhibits moderate extraction effect by forming 4-HP:D2EHPA(1:1) and 4-HP:2D2EHPA(1:2) type complexes, while(iii) D2EHPA in TBP/1-octanol demonstrates the maximum distribution ratio with the 4-HP:D2EHPA(1:1) type complex domination. The discussion provides new insights on the mechanism and opens a new way for the intensified extraction of amphoteric organic compounds by using the mixture of multiple extractants in the diluent.
基金supported by the Climate Change Response Project (NRF-2019M1A2A2065612)the Brainlink Project (NRF2022H1D3A3A01081140)+3 种基金the NRF-2021R1A4A3027878 and the No. RS-2023-00212273 funded by the Ministry of Science and ICT of Korea via National Research Foundationresearch funds from Hanhwa Solutions Chemicals (1.220029.01)UNIST (1.190013.01)supported by the Institute for Basic Science (IBS-R019-D1)。
文摘Electrochemical N_(2) reduction reaction(eNRR) over Cu-based catalysts suffers from an intrinsically low activity of Cu for activation of stable N_(2) molecules and the limited supply of N_(2) to the catalyst due to its low solubility in aqueous electrolytes.Herein,we propose phosphorus-activated Cu electrocatalysts to generate electron-deficient Cu sites on the catalyst surface to promote the adsorption of N_(2) molecules.The eNRR system is further modified using a gas diffusion electrode(GDE) coated with polytetrafluoroethylene(PTFE) to form an effective three-phase boundary of liquid water-gas N_(2)-solid catalyst to facilitate easy access of N_(2) to the catalytic sites.As a result,the new catalyst in the flow-type cell records a Faradaic efficiency of 13.15% and an NH_(3) production rate of 7.69 μg h^(-1) cm^(-2) at-0.2 V_(RHE),which represent 3.56 and 59.2 times increases from those obtained with a pristine Cu electrode in a typical electrolytic cell.This work represents a successful demonstration of dual modification strategies;catalyst modification and N_(2) supplying system engineering,and the results would provide a useful platform for further developments of electrocatalysts and reaction systems.
文摘Herein, the K<sub>3</sub>MoO<sub>2</sub>F<sub>5</sub><sup>.</sup>2H<sub>2</sub>O:Mn<sup>4+</sup> phosphor was synthesized by using low toxic NH<sub>4</sub>HF<sub>2</sub> and HCl instead of highly toxic HF. The K3</sub>MoO2</sub>F<sub>5</sub><sup>.</sup><sub></sub>2H2</sub>O:Mn4+</sup> phosphor has a blocky structure and exhibits sharp red emission at the range of 580 to 670 nm excited by the blue light at 470 nm. The fabricated WLED device at 20 mA current has low correlation color temperature (CCT = 3608 K) and high color rendering index (Ra = 90.1), which can significantly improve the electroluminescence performance of cold WLED devices. These results indicate that the K3</sub>MoO2</sub>F5</sub><sup>.</sup>2H2</sub>O:Mn4+</sup> phosphor has potential application value in warm WLED excited by blue light chip. .
基金Sponsored by the National Natural Science Foundation of China(Grant No.50778052)Development Program for Outstanding Young Teachers in Harbin Institute of Technology(Grant No.NQQQ92324547)
文摘To achieve stable and efficient nitrogen and phosphorus removal and to investigate the characteristics of the A/A SBR enriched with denitrifying phosphorus removal bacteria(DPB),the whole course of startup was studied with two reactors operated in different mode.The reactor I was operated under anaerobic/settling/anoxic/settling mode,and the reactor II was operated under anaerobic/anoxic/settling mode.Differences between the two reactors in removal efficiency of COD,nitrogen and phosphorus were examined.The results indicated that efficient performance could be achieved in both reactors with different startup operation mode,while the phosphorus removal efficiency was improved sooner in reactor I than in reactor II,which suggested that reactor I would supply a more favorable condition for DPB proliferation.Meanwhile,it was observed that the amount of organic substrates consumption had a linear correlation to that of phosphorus release in anaerobic phase when DPB was accumulated in the A/A SBR denitrifying phosphorus removal system.
文摘Most of the commercial white LED lamps use blue chip coated with yellow emitting phosphor. YAG:Ce3+ phosphor is coated on blue chip to obtain white light. Though this is commercially successful, there are several drawbacks such as “halo effect”, poor colour rendition, etc. In recent years several efforts have been made to improve LED lamp performance. In this paper modifica-tion of YAG:Ce phosphor for improving CRI, by introducing Gd3+, Pr3+ or Tb3+ at Ce3+ site is reported.
基金Project supported by Foundation for the Excellent Middle-Aged or Young Scientists of Shandong Province (02BS049)
文摘Ultra-fine Ce:YAG phosphors were prepared by homogeneous precipitation under microwave irradiation method. The formation of Ce:YAG was investigated by means of XRD and DTA/TG. The purified YAG crystallized phase was obtained at a lower temperature (1100 ℃). Basically spherical Ce:YAG powders were indicated from TEM images, and the size of the particles is about 80 nm. Two peaks of 436 and 473 nm can be seen from the excitation spectrum in the range of 402～510 nm. A broad emission band located at 480～630 nm shows the phosphors prepared by this method have good emission properties.
基金Supported by the National Basic Research Program of China(2016YFD0200404)
文摘Iron element is one of the main impurities in wet-process phosphoric acid and it has a significant impact on the subsequent phosphorus chemical products. This paper studied the feasibility of using Sinco-430 cation exchange resin for iron removal from phosphoric acid. The specific surface area and the total exchange capacity of resin were 8.91 m2·g-1 and 5.18 mmol·g-1, respectively. The sorption mechanism was determined by FTIR and XPS and the results indicated that iron was combined with-SO3 H in resin. The removal process was studied as a function of temperature, H3 PO4 content and mass ratio between resin and solution. The unit mass of resin to remove iron was 0.058 g·g-1 resin when the operating parameters were T = 50 ℃, H3 PO4 content = 27.61 wt%and S/L = 0.1, respectively. Kinetics study demonstrated that pseudo-second-order reaction model fits this study best and the calculated activation energy of overall reaction is 29.10 kJ·mol-1. The overall reaction process was mainly controlled by pore diffusion.
基金supported by the National Natural Science Foundation of China (No.20501023)the Youth Research Fund Project of Guangzhou Research Institute of Non-ferrous Metals
文摘The new phosphors Bi2ZnB2O7:Ln3+ (Ln3+=Eu3+,Dy3+) were synthesized by solid-state reaction technique.The obtained phosphors were investigated by means of X-ray powder diffraction (XRD),photoluminescence excitation and emission spectra with the aim of enhancing the fundamental knowledge about the luminescent properties of Eu3+ and Dy3+ ions in the Bi2ZnB2O7 host lattice.XRD analysis shows that all these compounds are of a single phase of Bi2ZnB2O7.The excitation and emission spectra of Bi2ZnB2O7:Ln3+ (Ln3+=Eu3+,Dy3+) at room temperature show the typical 4f-4f transitions of Eu3+ and Dy3+,respectively.The hypersensitive transitions of 5D0→7F2 (Eu3+) and 4F9/2→6H13/2 (Dy3+) are relatively higher than those of the insensitive transitions in Bi2ZnB2O7.It is conceivable that the Bi2ZnB2O7 structure provides asymmetry sites for activators (Eu3+,Dy3+).The optimum concentrations of Eu3+ and Dy3+ ions in Bi2ZnB2O7 phosphors are both x=0.05.
基金supported by the Ministry of Science and Technology of China (2006AA03A133)the Foundation of International Joint Research of Beijing (2007N08)
文摘YAG:Ce phosphor was synthesized by a novel simple method,wherein the admixture of three raw materials(Y2O3,α-Al2O3 and CeO2) were first acidified by diluted nitric acid to prepare a precursor,followed by a high temperature heating treatment of the obtained precursor under reductive atmosphere.Through XRD measurement and SEM observation,it was found that Y2O3,one of the raw material,was firstly dissolved into the diluted nitric acid,and then recrystallized on the surface of both α-Al2O3 and CeO2 to form a novel nano-flaky hierarchical architectures with the crystalline structure of yttrium nitrate hydroxide hydrates,which makes all the precursor more homogeneous than the admixture of the raw materials from simple mechanical blending method.In the following heating process,the obtained homogeneous admixtures with hierarchical architectures could easily transform into uniform YAG:Ce phosphor.The resulted YAG:Ce phosphor exhibited higher emission intensity than the sample synthesized from mechanical mixing raw materials.
基金the National Natural Science Foundation of China(51576064,51776070)Beijing Nova Program(Z171100001117064)+2 种基金Beijing Natural Science Foundation(3172030)grants from the Fok Ying Tung Education Foundation(161051)Fundamental Research Funds for the Central Universities(2018QN057,2018ZD08)for financial support。
文摘The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamental mechanism for selective LGO formation is unclear.Herein,quantum chemistry calculations and catalytic fast pyrolysis experiments were performed to reveal the formation mechanism of LGO in H3PO4-catalyzed cellulose pyrolysis.H3PO4 significantly decreased the energy barriers of the pyrolytic reactions and altered the competitiveness of the LGO formation pathways,promoting LGO formation.Through different pathways in the non-catalytic and H3P04-catalyzed conditions,LGO is mainly produced from the primary decomposition of glucose units of cellulose and secondary conversion of levoglucosan.The major catalytic formation pathways of LGO comprise similar reactions,with dehydration at the 3-OH+2-H site as the rate-determining step.Importantly,secondary conversion of 1,4;3,6-dianhydro-α-D-glucopyranose is not feasible for LGO formation,in contrast to previous reports.In addition,a high degree of polymerization is beneficial for the selectivity of LGO formation in the catalytic process,because the glycosidic bond is important for the formation of the bicyclic structure (1,5-and1,6-acetal rings).
基金supported by High Technology Research and Development program foundation of China (2007AA06Z202) (863)Natural Science Foundation of Jilin Province of China (20070405)State Key Laboratory of Rare Earth Resource Utilization of China (R02020202K)
文摘CaAl2O4:Eu3+,R+(R=Li+,Na+,K+) red phosphors were synthesized by solid state reaction method.X-ray diffraction(XRD) and photoluminescence(PL) were employed to characterize their structural and luminescent properties.It was found that the optimal sintering temperature and sintering time were 1200 °C and 4 h,respectively.The optimal concentration of doped Eu3+ was 3 mol.%.Furthermore,under ultraviolet excitation with a wavelength of 254 nm,these samples showed red luminescence which were probably attributed to the transitions from 5D0 excited state to 7FJ(J=0-4) ground states of Eu3+ ions.The feature and the high intensity of hypersensitive transition from 5D0→7F2 indicated that Eu3+ preferred to occupy a low symmetry site.The incorporation of alkali metal ions greatly enhanced the luminescence intensity probably due to the influence of charge compensation of alkali metal ions.
基金Project supported by the National Natural Science Foundation of China (50372086) and the Minstry of Science and Technology of China (2006AA03A133)
文摘Eu-activated CaMoO4 phosphors were co-precipitated in an aqueous solution, and NH3·H2O, NH4HCO3 and (NH2)2CO as pre-cipitating aid agents were compared based on the morphology and particle size distribution of the phosphor samples. Sm3+ as sensitizer ion was investigated on the luminescence of CaMoO4:Eu, and it could strengthen the 406 nm absorption of this phosphor. At last, the scheelite CaMoO4:Eu and wolframite ZnMoO4:Eu were selected to compare their host absorption. The result showed that the scheelite molybdate host exhibited stronger UV absorption than wolframite one.
文摘Phosphors of yttrium aluminium garnet activated by cerium ion, a kind of yellow luminescent materials for white LED lighting, were synthesized via solid-state reaction route in air and then reducing atmospheres.Thermal analysis was conducted by DTA/TGA.Moreover, XRD patterns of phosphors show that pure cubic phase of Y3 Al5 O12 is formed.Microstructures of the powders were observed by SEM.Luminescent spectra of the phosphors were also characterized by a spectrophotometer.The effect of sintering time on excitation and emission properties of the YAG: Ce3+ powders were systematically studied, resulting a best range of sintering time, 300 ～ 400 min, for maximal relative luminescent intensity.
