A novel poly（d, /-lactic acid） （PDLLA） based biomimetic polymer was synthesized by grafting maleic anhydride, butanediamine and arg-gly-asp-ser （RGDS） peptides onto the backbone of PDLLA, aiming to overcome the ...A novel poly（d, /-lactic acid） （PDLLA） based biomimetic polymer was synthesized by grafting maleic anhydride, butanediamine and arg-gly-asp-ser （RGDS） peptides onto the backbone of PDLLA, aiming to overcome the acidity and auto-accelerating degradation of PDLLA during degradation and to improve its biospecificity and biocompatibility. The synthetic copolymer was characterized by FTIR, ^13C NMR and amino acid analyzer （AAA）.展开更多
Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chit...Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.展开更多
Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000...Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.展开更多
PDLLA/CHI/β-TCP/NGF composite films were prepared by a solvent evaporation method. The degradation characteristics of the poly （d, l-lactide） composite films were studied in vitro and in vivo. The acidity produced ...PDLLA/CHI/β-TCP/NGF composite films were prepared by a solvent evaporation method. The degradation characteristics of the poly （d, l-lactide） composite films were studied in vitro and in vivo. The acidity produced by poly （d, l-lactide） materials was not obvious. Adding chitosan and β-TCP can relieve the acidity problem and improve strength performance of films. The NGF has influences on the degradation characteristics of films. It is verified that PDLLA/CHI/β-TCP/NGF composite films prepared by solvent evaporation method have excellent degradation characteristics. It can be used as a perfect biomaterial for repairing nerve injuries.展开更多
A novel cyclodextrin-containing polymer was prepared by graftingβ-cyclodextrin onto the backbone of poly(D,L-lactic acid)(PLA).First,mono(6-(2-aminoethyl)amino-6-deoxy)-β-cyclodextrin(β-CD-6-en)was prepared by sulf...A novel cyclodextrin-containing polymer was prepared by graftingβ-cyclodextrin onto the backbone of poly(D,L-lactic acid)(PLA).First,mono(6-(2-aminoethyl)amino-6-deoxy)-β-cyclodextrin(β-CD-6-en)was prepared by sulfonylation and amination ofβ-cyclodextrin and modified poly(D,L-lactic acid)(MPLA)was prepared by free radical polymerization of maleic anhydride and PLA.Then,grafting ofβ-cyclodextrin derivative to MPLA backbone was carried out by N-acylation reaction of MPLA andβ-CD-6-en in dimethyl formamide.The...展开更多
Monomethoxy poly(ethylene glycol)-block-poly(D,L-lactic acid)(PEG-PLA)is a typical amphiphilic di-block copolymer widely used as a nanoparticle carrier(nanocarrier)in drug delivery.Understanding the in vivo fate of PE...Monomethoxy poly(ethylene glycol)-block-poly(D,L-lactic acid)(PEG-PLA)is a typical amphiphilic di-block copolymer widely used as a nanoparticle carrier(nanocarrier)in drug delivery.Understanding the in vivo fate of PEG-PLA is required to evaluate its overall safety and promote the development of PEG-PLA-based nanocarrier drug delivery systems.However,acquiring such understanding is limited by the lack of a suitable analytical method for the bioassay of PEG-PLA.In this study,the pharmacokinetics,biodistribution,metabolism and excretion of PEG-PLA were investigated in rat after intravenous administration.The results show that unchanged PEG-PLA is mainly distributed to spleen,liver,and kidney before being eliminated in urine over 48 h mainly(>80%)in the form of its PEG metabolite.Our study provides a clear and comprehensive picture of the in vivo fate of PEG-PLA which we anticipate will facilitate the scientifc design and safety evaluation of PEG-PLA-based nanocarrier drug delivery systems and thereby enhance their clinical development.展开更多
The goal of this study is to design and synthesize a linear segmented shape memory poly（urethane-urea） （SMPUU） that possesses near-body-temperature shape memory temperature （Ttran） and enhanced mechanical proper...The goal of this study is to design and synthesize a linear segmented shape memory poly（urethane-urea） （SMPUU） that possesses near-body-temperature shape memory temperature （Ttran） and enhanced mechanical properties by incorporating flexible poly（ethylene glycol） 400 （PEG400） to form poly（D,L-lactic acid）-based macro- diols （PDLLA-PEG400-PDLLA） and then rigid piperazine （PPZ） as a chain extender to form the desired SMPUUs （PEG400-PUU-PPZ）. PEG400 increased Mn while maintaining a lower Tg of PDLLA-PEG400-PDLLA, which together with PPZ improved the mechanical properties of PEG400-PUU-PPZ. The obtained optimum SMPUU with enhanced mechanical properties （O＇y = 24.28 MPa; zf = 698%; Uf = 181.5 MJIm3） and a Tg of 40.62~C exhibited sound shape memory properties as well, suggesting a promising SMPUU for in vivo biomedical applications.展开更多
Incorporation of nanoparticles into polymer blend to obtain finely dispersed morphology has been considered as an effective strategy to prepare nanocomposites. Owing to the renewable and degradable characters, cellulo...Incorporation of nanoparticles into polymer blend to obtain finely dispersed morphology has been considered as an effective strategy to prepare nanocomposites. Owing to the renewable and degradable characters, cellulose nanocrystals(CNCs) have been proposed to tailor the phase morphology of poly(L-lactic acid)(PLLA) blend for producing high-performance fused deposition modeling(FDM) consumables. However,the main challenge associated with the ternary systems is the dispersion of the highly hydrophilic CNCs in non-polar PLLA blend by industrial melt blending without involving solution. Herein, with poly(vinyl acetate)(PVAc) modified CNCs powder(a mixture of PVAc grafted from CNCs and PVAc homopolymer latex), the selective dispersion of CNCs in PLLA has been achieved by simple melt processing of PLLA/TPU(polyether polyurethane)/CNCs blend. This results in the ultra-fine TPU droplets at nanoscale in PLLA and improves the melt processibility of composites in FDM due to the decreased viscosity ratio of the dispersed/matrix and the enhanced melt elasticity of PLLA. Combined with the intensive shear and continuous stretch effect during FDM, aligned TPU nanofibers(TNFs) were in situ formed along the elongational flow direction during deposition, which in turn contributed to the improvement of PLLA/TPU/CNCs with 5 wt% filler loading in tensile ductility by 418%, inter-layer adhesion strength and notched impact toughness by 261% and 210%, respectively, as well as achieved good dimensional accuracy and very fine surface quality.展开更多
基金This study was supported by the National Natural Science Foundation of China(No.30270395 and 30300084)the National"863"Project(No.2003AA32X210).
文摘A novel poly（d, /-lactic acid） （PDLLA） based biomimetic polymer was synthesized by grafting maleic anhydride, butanediamine and arg-gly-asp-ser （RGDS） peptides onto the backbone of PDLLA, aiming to overcome the acidity and auto-accelerating degradation of PDLLA during degradation and to improve its biospecificity and biocompatibility. The synthetic copolymer was characterized by FTIR, ^13C NMR and amino acid analyzer （AAA）.
文摘Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.
文摘Poly (lactic acid) (PLA) was synthesized by microwave-assisted ring-opening polymerization of D, L-lactide with stannous octanoate (SnOct(2)) as catalyst. Its weight-average molar mass (M-w) ranged from 39000 to 67000 and the polydispersity index from 1.3 to 1.7. The polymerization rate was much faster than that of the conventional thermal polymerization. A degradation of newly formed PLA in reaction mixture by microwave irradiation was observed.
文摘PDLLA/CHI/β-TCP/NGF composite films were prepared by a solvent evaporation method. The degradation characteristics of the poly （d, l-lactide） composite films were studied in vitro and in vivo. The acidity produced by poly （d, l-lactide） materials was not obvious. Adding chitosan and β-TCP can relieve the acidity problem and improve strength performance of films. The NGF has influences on the degradation characteristics of films. It is verified that PDLLA/CHI/β-TCP/NGF composite films prepared by solvent evaporation method have excellent degradation characteristics. It can be used as a perfect biomaterial for repairing nerve injuries.
基金Funded by the Natural Science Foundation of China(No.50603032)Education Commission of Chongqing(No.KJ090617)the Science and Technology Plan Project of Jiulongpo District,Chongqing,China(No.2008Q95)
文摘A novel cyclodextrin-containing polymer was prepared by graftingβ-cyclodextrin onto the backbone of poly(D,L-lactic acid)(PLA).First,mono(6-(2-aminoethyl)amino-6-deoxy)-β-cyclodextrin(β-CD-6-en)was prepared by sulfonylation and amination ofβ-cyclodextrin and modified poly(D,L-lactic acid)(MPLA)was prepared by free radical polymerization of maleic anhydride and PLA.Then,grafting ofβ-cyclodextrin derivative to MPLA backbone was carried out by N-acylation reaction of MPLA andβ-CD-6-en in dimethyl formamide.The...
基金supported by the National Natural Science Foundation of China(Grant Nos.81872831 and 82030107)the National Science and Technology Major Projects for signifcant new drugs creation of the 13th fve-year plan(2017ZX09101001 and 2018ZX09721002007,China)。
文摘Monomethoxy poly(ethylene glycol)-block-poly(D,L-lactic acid)(PEG-PLA)is a typical amphiphilic di-block copolymer widely used as a nanoparticle carrier(nanocarrier)in drug delivery.Understanding the in vivo fate of PEG-PLA is required to evaluate its overall safety and promote the development of PEG-PLA-based nanocarrier drug delivery systems.However,acquiring such understanding is limited by the lack of a suitable analytical method for the bioassay of PEG-PLA.In this study,the pharmacokinetics,biodistribution,metabolism and excretion of PEG-PLA were investigated in rat after intravenous administration.The results show that unchanged PEG-PLA is mainly distributed to spleen,liver,and kidney before being eliminated in urine over 48 h mainly(>80%)in the form of its PEG metabolite.Our study provides a clear and comprehensive picture of the in vivo fate of PEG-PLA which we anticipate will facilitate the scientifc design and safety evaluation of PEG-PLA-based nanocarrier drug delivery systems and thereby enhance their clinical development.
文摘The goal of this study is to design and synthesize a linear segmented shape memory poly（urethane-urea） （SMPUU） that possesses near-body-temperature shape memory temperature （Ttran） and enhanced mechanical properties by incorporating flexible poly（ethylene glycol） 400 （PEG400） to form poly（D,L-lactic acid）-based macro- diols （PDLLA-PEG400-PDLLA） and then rigid piperazine （PPZ） as a chain extender to form the desired SMPUUs （PEG400-PUU-PPZ）. PEG400 increased Mn while maintaining a lower Tg of PDLLA-PEG400-PDLLA, which together with PPZ improved the mechanical properties of PEG400-PUU-PPZ. The obtained optimum SMPUU with enhanced mechanical properties （O＇y = 24.28 MPa; zf = 698%; Uf = 181.5 MJIm3） and a Tg of 40.62~C exhibited sound shape memory properties as well, suggesting a promising SMPUU for in vivo biomedical applications.
基金financial support from the National Natural Science Foundation of China (Nos. 21774068, 51503782)Key Research and Development Program of Shaanxi Province of China (No. 2021GY-236)。
文摘Incorporation of nanoparticles into polymer blend to obtain finely dispersed morphology has been considered as an effective strategy to prepare nanocomposites. Owing to the renewable and degradable characters, cellulose nanocrystals(CNCs) have been proposed to tailor the phase morphology of poly(L-lactic acid)(PLLA) blend for producing high-performance fused deposition modeling(FDM) consumables. However,the main challenge associated with the ternary systems is the dispersion of the highly hydrophilic CNCs in non-polar PLLA blend by industrial melt blending without involving solution. Herein, with poly(vinyl acetate)(PVAc) modified CNCs powder(a mixture of PVAc grafted from CNCs and PVAc homopolymer latex), the selective dispersion of CNCs in PLLA has been achieved by simple melt processing of PLLA/TPU(polyether polyurethane)/CNCs blend. This results in the ultra-fine TPU droplets at nanoscale in PLLA and improves the melt processibility of composites in FDM due to the decreased viscosity ratio of the dispersed/matrix and the enhanced melt elasticity of PLLA. Combined with the intensive shear and continuous stretch effect during FDM, aligned TPU nanofibers(TNFs) were in situ formed along the elongational flow direction during deposition, which in turn contributed to the improvement of PLLA/TPU/CNCs with 5 wt% filler loading in tensile ductility by 418%, inter-layer adhesion strength and notched impact toughness by 261% and 210%, respectively, as well as achieved good dimensional accuracy and very fine surface quality.
