The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fi...The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fiber is better than cotton and spandex. The study focused on predicting knit fabric bursting strength test value using different fibers (cotton, polyester, and spandex) with varying percentages of the blend ratio. This study used fifteen categories of blended fabrics. The Pearson Correlation and the hypothetical ANOVA regression analysis were conducted to do the statistical significance test. The experimental result reveals that the bursting strength test result increased with the increased percentage of polyester and suggested a suitable regression equation. The dominance of the polyester fiber was observed throughout the experiment, i.e., the higher the polyester blend proportion, the higher the bursting strength value. The inclusion of polyester in blends can reduce the cost of fabric. The developed prediction model or equation can help the fabric manufacturer make appropriate decisions regarding getting the expected bursting strength. The researcher hopes that the findings from this study will motivate new researchers, advanced researchers, and the textile manufacturing industry.展开更多
With the exponential development in wearable electronics,a significant paradigm shift is observed from rigid electronics to flexible wearable devices.Polyaniline(PANI)is considered as a dominant material in this secto...With the exponential development in wearable electronics,a significant paradigm shift is observed from rigid electronics to flexible wearable devices.Polyaniline(PANI)is considered as a dominant material in this sector,as it is endowed with the optical properties of both metal and semiconductors.However,its widespread application got delineated because of its irregular rigid form,level of conductivity,and precise choice of solvents.Incorporating PANI in textile materials can generate promising functionality for wearable applications.This research work employed a straightforward in-situ chemical oxidative polymerization to synthesize PANI on Cotton fabric surfaces with varying dopant(HCl)concentrations.Pre-treatment using NaOH is implemented to improve the conductivity of the fabric surface by increasing the monomer absorption.This research explores the morphological and structural analysis employing SEM,FTIR and EDX.The surface resistivity was measured using a digital multimeter,and thermal stability is measured using TGA.Upon successful polymerization,a homogenous coating layer is observed.It is revealed that the simple pre-treatment technique significantly reduces the surface resistivity of Cotton fabric to 1.27 kΩ/cm with increasing acid concentration and thermal stability.The electro-thermal energy can also reach up to 38.2°C within 50 s with a deployed voltage of 15 V.The modified fabric is anticipated to be used in thermal regulation,supercapacitor,sensor,UV shielding,antimicrobial and other prospective functional applications.展开更多
Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester...Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team.展开更多
The use of the four new synthesized polyurethane acrylate binders in the pigment print paste for screen printing cotton and polyester fabrics and pigment fixation through the polymerization process of the binder by us...The use of the four new synthesized polyurethane acrylate binders in the pigment print paste for screen printing cotton and polyester fabrics and pigment fixation through the polymerization process of the binder by using the thermofixation technique as well as the UV curing technique was studied. The effect of changing time and temperature of thermofixation, and the time of UV curing on the color strength, and prints fastness properties were also studied. The results showed that, the newly synthesized polyurethane acrylate binders could be successfully used for pigment fixation on cotton and polyester using the two fixation techniques and in general their prints possessed better color strength values as compared to those obtained upon using the selected commercial binders.展开更多
A new type of alkali-soluble polyester/cotton blended yarns was used to knit a compact knitted fabric on a circular weft knitting machine,treated with 5 g/L NaOH solution for 60 min at a temperature of 100℃,and the p...A new type of alkali-soluble polyester/cotton blended yarns was used to knit a compact knitted fabric on a circular weft knitting machine,treated with 5 g/L NaOH solution for 60 min at a temperature of 100℃,and the polyester was completely dissolved.The dissolved polyester could be polymerized again by a polycondensation reaction.After the cotton fibers were opened and combed,the length and mechanical properties of the cotton fibers were tested.The physical and mechanical properties of the separated cotton fibers were good.The chemical structure and crystallinity were analyzed by Fourier transform infrared(FTIR)spectroscopy and X-ray diffraction(XRD)analysis.It could be seen that the chemical structure of cotton fibers was almost unchanged after treatment,and the crystallinity decreased slightly.It provides some reference for the separation and recycling of waste polyester/cotton fabrics.展开更多
In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester res...In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester resin where styrene monomer used as a solvent and 1% methyl ethyl ketone peroxide (MEKP) was used as initiator. Two bar pressure was applied for complete wetting of the fabric by a Padder and curing was done at 130?C for 10 minutes. The physico-mechanical characteristics of untreated and treated samples were examined and evaluated. It was revealed that moisture content (MC) and water absorbency of the treated specimens were decreased with the increase of resin percentage (%) in the fabrics. MC and water absorbency were maximum decreased up to 50.23% and 60.14% respectively by 25% resin treatment. On the other hand, bending length (BL), flexural rigidity (FR), flexural modulus (FM) and tensile strength (TS) were enhanced with the increase of resin percentage in the fabrics which resulted higher fabric stiffness. The maximum improvement of BL, FR, FM and TS were found to be 6.67%, 56.04%, 10.57% and 18.75% respectively in comparison to untreated sample. Soil degradation tests exhibited that 33.59% TS loss occurred for untreated specimens where only 8.04% loss of TS found for 25% resin treated one. Furthermore, jute based twill, zigzag and diamond fabrics were also treated by 10%, 15%, 20% and 25% resin, then measured their TS and compared with plain fabrics. It was revealed that plain fabrics have superior TS over other fabrics. It was also evident that TS enhanced for all the fabrics after resin treatment and maximum increase found for all the fabrics up to 25% resin treatment.展开更多
This study intended to develop a healthy and environmentally friendly super-hydrophobic PET polyester textile fabric using a specific Fluoro Silane finish(SHF).A novel SHF was prepared and applied on a polyester fabri...This study intended to develop a healthy and environmentally friendly super-hydrophobic PET polyester textile fabric using a specific Fluoro Silane finish(SHF).A novel SHF was prepared and applied on a polyester fabric using a pad-dry-cure method.The finished fabric was evaluated for the degree of hydrophobicity,durability and stain repellence.The finished fabric exhibited static water contact angle greater than 170o and received 90 AATCC(4 ISO)rating that is recognized as super-hydrophobicity and this property was maintained even after a 50,000-cycle abrasion test.FTIR analysis identified the characteristic peaks related to Si-O-Si and C-F asymmetric stretching bands of the finish on the fabric indicating a robust attachment on the fabric.Finished fabric did not show any change in appearance or tactile characteristics of the fabric.展开更多
In this paper, dyeing processes of silk-like fabric of ultra-fine polyester fiber are studied through orthogonal experiment, dyeing properties (K/S value, L* value, and C* value) of the fabric are tested under differe...In this paper, dyeing processes of silk-like fabric of ultra-fine polyester fiber are studied through orthogonal experiment, dyeing properties (K/S value, L* value, and C* value) of the fabric are tested under different dyeing conditions (pH value, time, and bath ratlo), and optimum dyeing conditions are arrived at through analysis.展开更多
Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields an...Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses indicated that the enhanced color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using atmospheric-pressure air plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods.展开更多
The dyeing deference between the superfine and the con-ventional polyester fabric is discussed. The major threefactors affecting the level dyeing property of superfinepolyester-initial adsorption rate, desorption rate...The dyeing deference between the superfine and the con-ventional polyester fabric is discussed. The major threefactors affecting the level dyeing property of superfinepolyester-initial adsorption rate, desorption rate andinterface migration rate of dyestuffs at 70℃ are studied.The levelness improves considerably with decreased ini-tial adsorption rate, increased desorption rate and inter-face migration rate. And then a mathematical indexbased on them is established. The evaluation to dispersedyes resulting from it corresponds with their perfor-mance during industrial process. As new definitions, ini-tial adsorption rate and desorption rate of dyestuffs arefirstly introduced.展开更多
The feasibility of photocatalytic degradation of the formaldehyde gas by titanium dioxide （TiO2）/polyester non-woven fabrics was studied. The effects of parameters such as the concentration of TiO2 solution, pH valu...The feasibility of photocatalytic degradation of the formaldehyde gas by titanium dioxide （TiO2）/polyester non-woven fabrics was studied. The effects of parameters such as the concentration of TiO2 solution, pH value, and drying temperature on the photocatalytic degradation of the formaldehyde gas were also studied. The results showed that the photodegradation efficiency of the formaldehyde gas increased rapidly with the increasing of the concentration of TiO2 solution up to 15g/L, but when the concentration was in excess of 15 g/L, the photodegradation efficiency decreased gradually and fluctuated due to light obstruction and disperse state of TiO2. Adjusting the pH value in the solution, the efficiency of photocatalytic degradation of the formaldehyde gas could be improved. The mechanisms of the reaction and the role of the additives were also investigated. After 42hours, TiO2/polyester non-woven fabric showed no significant loss of the photocatalytic activity.展开更多
The influence of different factors on dyeing depth was explored when the cotton fabric was dyed with KN reactive dyes by microwave radiation,and the rubbing fastness and soaping fastness of the fabrics by conventional...The influence of different factors on dyeing depth was explored when the cotton fabric was dyed with KN reactive dyes by microwave radiation,and the rubbing fastness and soaping fastness of the fabrics by conventional dyeing and microwave dyeing are determined.In addition,we also researched the effects of microwave heating on the dyeing properties of different dyes.The results show that: the dyeing time of cotton fabric by microwave heating can be greatly shortened,and the dyeing performance is similar to conventional dyeing process.展开更多
The film morphology of dodecyl/carboxyl modified polysiloxane(RCAS) on cotton fabric or the silicon wafer was investigated and characterized by field emission scanning electron microscopy(FESEM),atomic force microscop...The film morphology of dodecyl/carboxyl modified polysiloxane(RCAS) on cotton fabric or the silicon wafer was investigated and characterized by field emission scanning electron microscopy(FESEM),atomic force microscope(AFM),and Fourier transform infrared spectrometer(FTIR).Experimental results indicate that RCAS is a good film forming material on different substrates.Relatively smooth film was formed on cotton fabric surface,on which the grooves disappeared.In addition,RCAS formed a micromorphology inhomogeneous and unsmooth film on the silicon wafer.Many high or low bright peaks distributed randomly on the film surface,especially as the field was 2μm×2 μm and the date scale was 5 nm in AFM observation.Then RCAS was emulsified with nonionic surfactant alkyl polyoxyethylene ether in order to achieve a transparent organosilicon emulsion-RCAS emulsion(RCSE),which possessed good stability.The properties of RCSE and its application performance on cotton fabrics were investigated and characterized by transmission electron microscope(TEM),particle size analysis,and voltage test instrument.The results show that the average particle size of RCAS emulsion is 28.32 nm,while the ζ voltage is-37.88 mV.Compared with untreatd cotton fabric,the softness of treated fabric can be improved with RCSE to a certain extent.At the same time,the fabric treated with RCSE acquires unique fluffy and soft handle.展开更多
Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has holl...Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.展开更多
In order to fabricate a novel ZnO/cotton composite, a high proportion of ZnO nanoparticles were assembled in cotton fibers, and the as-obtained cotton fabric can possess better UV blocking property compared with commo...In order to fabricate a novel ZnO/cotton composite, a high proportion of ZnO nanoparticles were assembled in cotton fibers, and the as-obtained cotton fabric can possess better UV blocking property compared with common ZnO/cotton composite. Firstly, the cotton fibers were pre-treated by hydrogen peroxide solution(H_2 O_2) and sodium hydroxide(NaOH), urea(CON_2 H_4). Secondly, the fabric was fabricated via in situ deposition. The effects of concentration of treatment liquid, ammonia-smoking time and curing temperature on the tensile property of the fabric, UV blocking property and water-washing durability test of as-obtained cotton fabrics were investigated. Thirdly, the as-obtained cotton sample was characterized by X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM). It was shown that ZnO nanoparticles were assembled between cotton fibers, the surface and inside of the lumen and the mesopores of cotton fibers, while the content of nano-ZnO assembled in fabric can reach 15.63 wt%. It is proved that the finished fabric can obtain a very excellent UV blocking property, under the condition of zinc ion in concentration of 15 wt%, ammonia-smoking time for 10 min, curing temperature at 150 ℃ for 2 min.展开更多
Multifunctional fabrics of high durability through a scalable and eco-friendly technique remains a great challenge hindering their commercialization.In this work,we report a facile synthesis technique for the fabricat...Multifunctional fabrics of high durability through a scalable and eco-friendly technique remains a great challenge hindering their commercialization.In this work,we report a facile synthesis technique for the fabrication of superhydrophobic antibacterial fabrics by employing fluorine-free silane coupling agents as cross-linkers for enhanced durability.Three silane cross-linkers,Aminoethylaminopropyltrimethoxysilane(AEAPTMS),Aminopropyltriethoxysilane(APTES),and Methacryloyloxypropyltrimethoxysilane(MPTMS),have been investigated.During the fabrication,a low surface energy polymer,polydimethylsiloxane(PDMS)was first deposited on cotton fabrics.Subsequently,antibacterial copper oxide(CuO)nanoparticles were anchored on the PDMS coated fabrics using the silane cross-linkers.The as-prepared fabrics displayed high superhydrophobicity and antibacterial performance with water contact angle(WCA)>153,water shedding angle(WSA)<5,and up to 99%antibacterial efficiency.Additionally,the as-prepared fabrics displayed high durability against abrasion,ultrasonic washing,and soaking in harsh chemical environments.The air permeability and flexibility of the fabric was not compromised after the coating.The above-reported technique is simple,cost-effective and holds tremendous potential for large-scale production of energy-saving clothing and healthcare products.展开更多
Titanium dioxide nanoparticle was synthesized by the reduction of titanium tetrachloride using borohydride, water as solvent, and polyvinyl-pyrrolidone as stabilizer. The average size of nano-TiO2 is estimated to be 5...Titanium dioxide nanoparticle was synthesized by the reduction of titanium tetrachloride using borohydride, water as solvent, and polyvinyl-pyrrolidone as stabilizer. The average size of nano-TiO2 is estimated to be 5 - 10 nm using a transmission electron microscope (TEM);this was confirmed by X-ray diffraction and UV-Vis spectroscopy. Nano-TiO2 was impregnated into cotton fabric to impart multifunctional properties and this was confirmed by scanning electron microscope and scanning electron microscope coupled with high energy distribution X-Ray (SEM-EDX). The TiO2 nanoparticles loaded cotton fabrics showed excellent antibacterial activity against two representative bacteria, Staphylococcus aureus (Gram positive) 96.6% and Klebsiella pneumonia (Gram negative) 95.2%. Also, TiO2 nanoparticles enhanced the self-cleaning and the protection of cotton fabrics against UV radiation in comparison with the untreated cotton fabrics. The TiO2 nanoparticles were durable in-situ cotton fabrics even after 20 laundering wash cycles.展开更多
In this study, aqueous extraction method is used because of its high extraction ratio, light fastness and also functional properties. In 1st phase, for dyeing S/J cotton knit fabric with green walnut power ferrous sul...In this study, aqueous extraction method is used because of its high extraction ratio, light fastness and also functional properties. In 1st phase, for dyeing S/J cotton knit fabric with green walnut power ferrous sulfate is considered as a mordant. In this study, three different mordanting methods such as pre-, meta-, and post-mordanting are conveyed the dyeing process with the state of metallic mordant and without metallic salt mordants. In 2nd phase, in dyeing for fixation ferrous sulfate was considered as mordants. Furthermore, the analysis and evaluation of each colour dyed material was done through following two terms for instance CIELAB (L*, a*, and b*) and K/S values. According to AATCC test methods, colour fastness to washing, crocking, perspiration of the dyed samples is determined whereas according to the ISO standard, the colour fastness to light was estimated and tested. When dyeing was carried out on S/J cotton knit fabric through considering optimum parameter like at 80°C for 60 min and at pH 4 which showed optimum results. From the results we can see, very good wash fastness was obtained while there is no fading of the colour, whereas the outstanding and moderate level of colour fastness to light and crocking is achieved.展开更多
Recent studies have shown interest in flame retardants containing phosphorus, nitrogen and sulfur a combination small molecule with a promising new approach in preparing an important class of flame retardant materials...Recent studies have shown interest in flame retardants containing phosphorus, nitrogen and sulfur a combination small molecule with a promising new approach in preparing an important class of flame retardant materials. Tetraethyl piperazine-1,4-diyldiphosphonate (TEPP) and O,O,O’,O’- tetramethyl piperazine-1,4-diyldiphosphonothioate (TMPT), based on Piperazine derivatives, were prepared successfully and their structures were proved by means of 1H, 13C and 31P NMR. Cotton twill fabric was treated with both compounds to provide different add-on levels. Thermogravimetric Analysis (TGA), microscale combustion calorimeter (MCC), vertical and 45° flame test and limiting oxygen index (LOI) were performed on the treated cotton fabrics and showed promising results. When the treated twill fabrics (5 wt% - 7 wt% add-ons) were tested using the vertical flammability test (ASTMD6413-11), we observed that the ignited fabrics self extinguished and left behind a streak of char. Limiting oxygen index (LOI, ASTM 2863-09) was utilized to determine the effectiveness of the flame retardant on the treated fabrics. LOI values increased from 18 vol% oxygen in nitrogen for untreated twill fabric to a maximum of 30 vol% for the highest add-on of twill. Furthermore, Scanning Electron Microscope (SEM), Attenuated Total Reflection-Infrared (ATR-IR), and Thermogravimetric Analysis-Fourier Transform Infrared (TGA-FTIR) spectroscopy were employed to characterize the chemical structure on the treated fabrics, as well as, the surface morphology of char areas of treated and untreated fabrics. Additionally, analysis of the release gas products by TGA-FTIR shows some distinctive detail in the degradation of the treated fabrics during the burning process.展开更多
A laccase (Denilite ⅡS) was used to treat different cotton fabrics dyed with 0.2 g·L-1 of vat dyes or reactive dyes. The results indicated that the laccase could remove the loosely adhering, unfixed or hydrolyze...A laccase (Denilite ⅡS) was used to treat different cotton fabrics dyed with 0.2 g·L-1 of vat dyes or reactive dyes. The results indicated that the laccase could remove the loosely adhering, unfixed or hydrolyzed dyes from the dyed fabric efficiently, which led to obvious improvements of color fastness. Furthermore, the wavelength of maximum absorbance of the residual solution of dyeing laccase-treated was different from that of the detergent-treated, which implied the laccase could accelerate structural changes of the adhering or hydrolyzed dyes from fabric in treating, resulting in obvious color changes of the residual solution. In addition, excessive laccase also could decolorize a few fixed reactive dyes from the dyed fabric, with a decrease of color strength and less further improvements of color fastness.展开更多
文摘The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fiber is better than cotton and spandex. The study focused on predicting knit fabric bursting strength test value using different fibers (cotton, polyester, and spandex) with varying percentages of the blend ratio. This study used fifteen categories of blended fabrics. The Pearson Correlation and the hypothetical ANOVA regression analysis were conducted to do the statistical significance test. The experimental result reveals that the bursting strength test result increased with the increased percentage of polyester and suggested a suitable regression equation. The dominance of the polyester fiber was observed throughout the experiment, i.e., the higher the polyester blend proportion, the higher the bursting strength value. The inclusion of polyester in blends can reduce the cost of fabric. The developed prediction model or equation can help the fabric manufacturer make appropriate decisions regarding getting the expected bursting strength. The researcher hopes that the findings from this study will motivate new researchers, advanced researchers, and the textile manufacturing industry.
基金This work is supported by the International Publication Research Grant No.RDU223301 and Postgraduate Research Grant Scheme,UMP,Malaysia(PGRS210370).
文摘With the exponential development in wearable electronics,a significant paradigm shift is observed from rigid electronics to flexible wearable devices.Polyaniline(PANI)is considered as a dominant material in this sector,as it is endowed with the optical properties of both metal and semiconductors.However,its widespread application got delineated because of its irregular rigid form,level of conductivity,and precise choice of solvents.Incorporating PANI in textile materials can generate promising functionality for wearable applications.This research work employed a straightforward in-situ chemical oxidative polymerization to synthesize PANI on Cotton fabric surfaces with varying dopant(HCl)concentrations.Pre-treatment using NaOH is implemented to improve the conductivity of the fabric surface by increasing the monomer absorption.This research explores the morphological and structural analysis employing SEM,FTIR and EDX.The surface resistivity was measured using a digital multimeter,and thermal stability is measured using TGA.Upon successful polymerization,a homogenous coating layer is observed.It is revealed that the simple pre-treatment technique significantly reduces the surface resistivity of Cotton fabric to 1.27 kΩ/cm with increasing acid concentration and thermal stability.The electro-thermal energy can also reach up to 38.2°C within 50 s with a deployed voltage of 15 V.The modified fabric is anticipated to be used in thermal regulation,supercapacitor,sensor,UV shielding,antimicrobial and other prospective functional applications.
文摘Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team.
文摘The use of the four new synthesized polyurethane acrylate binders in the pigment print paste for screen printing cotton and polyester fabrics and pigment fixation through the polymerization process of the binder by using the thermofixation technique as well as the UV curing technique was studied. The effect of changing time and temperature of thermofixation, and the time of UV curing on the color strength, and prints fastness properties were also studied. The results showed that, the newly synthesized polyurethane acrylate binders could be successfully used for pigment fixation on cotton and polyester using the two fixation techniques and in general their prints possessed better color strength values as compared to those obtained upon using the selected commercial binders.
文摘A new type of alkali-soluble polyester/cotton blended yarns was used to knit a compact knitted fabric on a circular weft knitting machine,treated with 5 g/L NaOH solution for 60 min at a temperature of 100℃,and the polyester was completely dissolved.The dissolved polyester could be polymerized again by a polycondensation reaction.After the cotton fibers were opened and combed,the length and mechanical properties of the cotton fibers were tested.The physical and mechanical properties of the separated cotton fibers were good.The chemical structure and crystallinity were analyzed by Fourier transform infrared(FTIR)spectroscopy and X-ray diffraction(XRD)analysis.It could be seen that the chemical structure of cotton fibers was almost unchanged after treatment,and the crystallinity decreased slightly.It provides some reference for the separation and recycling of waste polyester/cotton fabrics.
文摘In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester resin where styrene monomer used as a solvent and 1% methyl ethyl ketone peroxide (MEKP) was used as initiator. Two bar pressure was applied for complete wetting of the fabric by a Padder and curing was done at 130?C for 10 minutes. The physico-mechanical characteristics of untreated and treated samples were examined and evaluated. It was revealed that moisture content (MC) and water absorbency of the treated specimens were decreased with the increase of resin percentage (%) in the fabrics. MC and water absorbency were maximum decreased up to 50.23% and 60.14% respectively by 25% resin treatment. On the other hand, bending length (BL), flexural rigidity (FR), flexural modulus (FM) and tensile strength (TS) were enhanced with the increase of resin percentage in the fabrics which resulted higher fabric stiffness. The maximum improvement of BL, FR, FM and TS were found to be 6.67%, 56.04%, 10.57% and 18.75% respectively in comparison to untreated sample. Soil degradation tests exhibited that 33.59% TS loss occurred for untreated specimens where only 8.04% loss of TS found for 25% resin treated one. Furthermore, jute based twill, zigzag and diamond fabrics were also treated by 10%, 15%, 20% and 25% resin, then measured their TS and compared with plain fabrics. It was revealed that plain fabrics have superior TS over other fabrics. It was also evident that TS enhanced for all the fabrics after resin treatment and maximum increase found for all the fabrics up to 25% resin treatment.
文摘This study intended to develop a healthy and environmentally friendly super-hydrophobic PET polyester textile fabric using a specific Fluoro Silane finish(SHF).A novel SHF was prepared and applied on a polyester fabric using a pad-dry-cure method.The finished fabric was evaluated for the degree of hydrophobicity,durability and stain repellence.The finished fabric exhibited static water contact angle greater than 170o and received 90 AATCC(4 ISO)rating that is recognized as super-hydrophobicity and this property was maintained even after a 50,000-cycle abrasion test.FTIR analysis identified the characteristic peaks related to Si-O-Si and C-F asymmetric stretching bands of the finish on the fabric indicating a robust attachment on the fabric.Finished fabric did not show any change in appearance or tactile characteristics of the fabric.
文摘In this paper, dyeing processes of silk-like fabric of ultra-fine polyester fiber are studied through orthogonal experiment, dyeing properties (K/S value, L* value, and C* value) of the fabric are tested under different dyeing conditions (pH value, time, and bath ratlo), and optimum dyeing conditions are arrived at through analysis.
基金New Century Excellent Talents of China ( NCET,No.040495)National Natural Science Foundation of China(NSFC, No.20474025)+1 种基金National Key Technology R&DProgram,China (No.2007BAE40B01)Innovative Research Team of Jiangnan University,China
文摘Without any preprocessing,polyester fabric has lower ability to hold on water and inks due to the smooth morphology of polyester fibers. Therefore, patterns directly printed with pigment inks have poor color yields and bleed easily. Pretreatments of polyester fabric were carried out with atmospheric air plasma under different experimental conditions. After plasma treatment the samples were printed with magenta pigment ink. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses indicated that the enhanced color performance was mainly contributed by not only the etching effect but also oxygen-containing polar groups induced onto fiber surfaces through plasma treatment. Thereby the surface modification of polyester fabrics using atmospheric-pressure air plasma offers a potential way to fabric pretreatment for pigment inkjet printing with the advantages of environmental friendly and energy saving over traditional pretreatment methods.
文摘The dyeing deference between the superfine and the con-ventional polyester fabric is discussed. The major threefactors affecting the level dyeing property of superfinepolyester-initial adsorption rate, desorption rate andinterface migration rate of dyestuffs at 70℃ are studied.The levelness improves considerably with decreased ini-tial adsorption rate, increased desorption rate and inter-face migration rate. And then a mathematical indexbased on them is established. The evaluation to dispersedyes resulting from it corresponds with their perfor-mance during industrial process. As new definitions, ini-tial adsorption rate and desorption rate of dyestuffs arefirstly introduced.
文摘The feasibility of photocatalytic degradation of the formaldehyde gas by titanium dioxide （TiO2）/polyester non-woven fabrics was studied. The effects of parameters such as the concentration of TiO2 solution, pH value, and drying temperature on the photocatalytic degradation of the formaldehyde gas were also studied. The results showed that the photodegradation efficiency of the formaldehyde gas increased rapidly with the increasing of the concentration of TiO2 solution up to 15g/L, but when the concentration was in excess of 15 g/L, the photodegradation efficiency decreased gradually and fluctuated due to light obstruction and disperse state of TiO2. Adjusting the pH value in the solution, the efficiency of photocatalytic degradation of the formaldehyde gas could be improved. The mechanisms of the reaction and the role of the additives were also investigated. After 42hours, TiO2/polyester non-woven fabric showed no significant loss of the photocatalytic activity.
文摘The influence of different factors on dyeing depth was explored when the cotton fabric was dyed with KN reactive dyes by microwave radiation,and the rubbing fastness and soaping fastness of the fabrics by conventional dyeing and microwave dyeing are determined.In addition,we also researched the effects of microwave heating on the dyeing properties of different dyes.The results show that: the dyeing time of cotton fabric by microwave heating can be greatly shortened,and the dyeing performance is similar to conventional dyeing process.
基金National Natural Science Foundation of China (No. 50373025)Doctoral Fund of the Ministry of Education of China (No.200807080002)Postgraduate Innovation Foundation of Shaanxi University of Science & Technology,China
文摘The film morphology of dodecyl/carboxyl modified polysiloxane(RCAS) on cotton fabric or the silicon wafer was investigated and characterized by field emission scanning electron microscopy(FESEM),atomic force microscope(AFM),and Fourier transform infrared spectrometer(FTIR).Experimental results indicate that RCAS is a good film forming material on different substrates.Relatively smooth film was formed on cotton fabric surface,on which the grooves disappeared.In addition,RCAS formed a micromorphology inhomogeneous and unsmooth film on the silicon wafer.Many high or low bright peaks distributed randomly on the film surface,especially as the field was 2μm×2 μm and the date scale was 5 nm in AFM observation.Then RCAS was emulsified with nonionic surfactant alkyl polyoxyethylene ether in order to achieve a transparent organosilicon emulsion-RCAS emulsion(RCSE),which possessed good stability.The properties of RCSE and its application performance on cotton fabrics were investigated and characterized by transmission electron microscope(TEM),particle size analysis,and voltage test instrument.The results show that the average particle size of RCAS emulsion is 28.32 nm,while the ζ voltage is-37.88 mV.Compared with untreatd cotton fabric,the softness of treated fabric can be improved with RCSE to a certain extent.At the same time,the fabric treated with RCSE acquires unique fluffy and soft handle.
基金Technical Standards for the Development of Kinitted Jinlong Underw ear Factory of Guangdong Province,China(No.HX201303000008)
文摘Nowadays,more and more natural or functional fibers are being investigated due to their utilization in thermal underwear.Kapok fiber is one of the natural cellulosic fibers whose source is the kapok plant. It has hollow body and sealed tail,which exhibits desirable features required for functional textiles of this nature. In this study,cotton / kapok( 80 /20 by mass) blended yarn with two types of yarn size 18. 5 and 14. 8 tex,respectively are knitted into plain stitches. The fabrics are undergone with an optimal preparation plan according to orthogonal design. Then,after dyeing and softening,fabric properties including thermal and water-vapour resistances, wicking property, pilling behaviour, and surface morphology,are tested and scrutinized for their candidacy for thermal underwear. The results showed that cotton / kapok blended fabrics have good thermal resistance which is significantly higher than those of cotton / modal blended fabrics,and the same water vapour resistance compared with cotton / modal blended fabrics which are normally used as underwear. Cotton / modal blended knitted fabrics has better pilling grade than cotton / kapok blended fabrics. Meanwhile, the cotton / kapok blends fabrics have good wicking property. Collectively,it was concluded that cotton / kapok blended fabric was appropriate for thermal underwear. However,the main limitation of these fabrics is their pilling properties.
基金Funded by the National Key R&D Program of China(2017YFB0309100)
文摘In order to fabricate a novel ZnO/cotton composite, a high proportion of ZnO nanoparticles were assembled in cotton fibers, and the as-obtained cotton fabric can possess better UV blocking property compared with common ZnO/cotton composite. Firstly, the cotton fibers were pre-treated by hydrogen peroxide solution(H_2 O_2) and sodium hydroxide(NaOH), urea(CON_2 H_4). Secondly, the fabric was fabricated via in situ deposition. The effects of concentration of treatment liquid, ammonia-smoking time and curing temperature on the tensile property of the fabric, UV blocking property and water-washing durability test of as-obtained cotton fabrics were investigated. Thirdly, the as-obtained cotton sample was characterized by X-ray diffraction(XRD) and field emission scanning electron microscopy(FESEM). It was shown that ZnO nanoparticles were assembled between cotton fibers, the surface and inside of the lumen and the mesopores of cotton fibers, while the content of nano-ZnO assembled in fabric can reach 15.63 wt%. It is proved that the finished fabric can obtain a very excellent UV blocking property, under the condition of zinc ion in concentration of 15 wt%, ammonia-smoking time for 10 min, curing temperature at 150 ℃ for 2 min.
基金Financial assistance from Ministry of Education,Singapore(RG 16/18)is gratefully acknowledged.
文摘Multifunctional fabrics of high durability through a scalable and eco-friendly technique remains a great challenge hindering their commercialization.In this work,we report a facile synthesis technique for the fabrication of superhydrophobic antibacterial fabrics by employing fluorine-free silane coupling agents as cross-linkers for enhanced durability.Three silane cross-linkers,Aminoethylaminopropyltrimethoxysilane(AEAPTMS),Aminopropyltriethoxysilane(APTES),and Methacryloyloxypropyltrimethoxysilane(MPTMS),have been investigated.During the fabrication,a low surface energy polymer,polydimethylsiloxane(PDMS)was first deposited on cotton fabrics.Subsequently,antibacterial copper oxide(CuO)nanoparticles were anchored on the PDMS coated fabrics using the silane cross-linkers.The as-prepared fabrics displayed high superhydrophobicity and antibacterial performance with water contact angle(WCA)>153,water shedding angle(WSA)<5,and up to 99%antibacterial efficiency.Additionally,the as-prepared fabrics displayed high durability against abrasion,ultrasonic washing,and soaking in harsh chemical environments.The air permeability and flexibility of the fabric was not compromised after the coating.The above-reported technique is simple,cost-effective and holds tremendous potential for large-scale production of energy-saving clothing and healthcare products.
文摘Titanium dioxide nanoparticle was synthesized by the reduction of titanium tetrachloride using borohydride, water as solvent, and polyvinyl-pyrrolidone as stabilizer. The average size of nano-TiO2 is estimated to be 5 - 10 nm using a transmission electron microscope (TEM);this was confirmed by X-ray diffraction and UV-Vis spectroscopy. Nano-TiO2 was impregnated into cotton fabric to impart multifunctional properties and this was confirmed by scanning electron microscope and scanning electron microscope coupled with high energy distribution X-Ray (SEM-EDX). The TiO2 nanoparticles loaded cotton fabrics showed excellent antibacterial activity against two representative bacteria, Staphylococcus aureus (Gram positive) 96.6% and Klebsiella pneumonia (Gram negative) 95.2%. Also, TiO2 nanoparticles enhanced the self-cleaning and the protection of cotton fabrics against UV radiation in comparison with the untreated cotton fabrics. The TiO2 nanoparticles were durable in-situ cotton fabrics even after 20 laundering wash cycles.
文摘In this study, aqueous extraction method is used because of its high extraction ratio, light fastness and also functional properties. In 1st phase, for dyeing S/J cotton knit fabric with green walnut power ferrous sulfate is considered as a mordant. In this study, three different mordanting methods such as pre-, meta-, and post-mordanting are conveyed the dyeing process with the state of metallic mordant and without metallic salt mordants. In 2nd phase, in dyeing for fixation ferrous sulfate was considered as mordants. Furthermore, the analysis and evaluation of each colour dyed material was done through following two terms for instance CIELAB (L*, a*, and b*) and K/S values. According to AATCC test methods, colour fastness to washing, crocking, perspiration of the dyed samples is determined whereas according to the ISO standard, the colour fastness to light was estimated and tested. When dyeing was carried out on S/J cotton knit fabric through considering optimum parameter like at 80°C for 60 min and at pH 4 which showed optimum results. From the results we can see, very good wash fastness was obtained while there is no fading of the colour, whereas the outstanding and moderate level of colour fastness to light and crocking is achieved.
文摘Recent studies have shown interest in flame retardants containing phosphorus, nitrogen and sulfur a combination small molecule with a promising new approach in preparing an important class of flame retardant materials. Tetraethyl piperazine-1,4-diyldiphosphonate (TEPP) and O,O,O’,O’- tetramethyl piperazine-1,4-diyldiphosphonothioate (TMPT), based on Piperazine derivatives, were prepared successfully and their structures were proved by means of 1H, 13C and 31P NMR. Cotton twill fabric was treated with both compounds to provide different add-on levels. Thermogravimetric Analysis (TGA), microscale combustion calorimeter (MCC), vertical and 45° flame test and limiting oxygen index (LOI) were performed on the treated cotton fabrics and showed promising results. When the treated twill fabrics (5 wt% - 7 wt% add-ons) were tested using the vertical flammability test (ASTMD6413-11), we observed that the ignited fabrics self extinguished and left behind a streak of char. Limiting oxygen index (LOI, ASTM 2863-09) was utilized to determine the effectiveness of the flame retardant on the treated fabrics. LOI values increased from 18 vol% oxygen in nitrogen for untreated twill fabric to a maximum of 30 vol% for the highest add-on of twill. Furthermore, Scanning Electron Microscope (SEM), Attenuated Total Reflection-Infrared (ATR-IR), and Thermogravimetric Analysis-Fourier Transform Infrared (TGA-FTIR) spectroscopy were employed to characterize the chemical structure on the treated fabrics, as well as, the surface morphology of char areas of treated and untreated fabrics. Additionally, analysis of the release gas products by TGA-FTIR shows some distinctive detail in the degradation of the treated fabrics during the burning process.
基金Supported by the National High Technology Research and Development Program of China ( No.2007AA02Z218)Open Project Program of Key Laboratory of Eco-Textiles,Jiangnan University,Ministry of Education(No.KLET0625)Youth Fund ofJiangnan University (No.2006LQN002)
文摘A laccase (Denilite ⅡS) was used to treat different cotton fabrics dyed with 0.2 g·L-1 of vat dyes or reactive dyes. The results indicated that the laccase could remove the loosely adhering, unfixed or hydrolyzed dyes from the dyed fabric efficiently, which led to obvious improvements of color fastness. Furthermore, the wavelength of maximum absorbance of the residual solution of dyeing laccase-treated was different from that of the detergent-treated, which implied the laccase could accelerate structural changes of the adhering or hydrolyzed dyes from fabric in treating, resulting in obvious color changes of the residual solution. In addition, excessive laccase also could decolorize a few fixed reactive dyes from the dyed fabric, with a decrease of color strength and less further improvements of color fastness.
