Based on the analysis of the properties of oily sludge samples,the effect of modification parameters,such as liquid to solid (L/S) ratio,agitation temperature,agitation intensity,agitation time and pH on the modificat...Based on the analysis of the properties of oily sludge samples,the effect of modification parameters,such as liquid to solid (L/S) ratio,agitation temperature,agitation intensity,agitation time and pH on the modification of oily sludge was investigated with the content of oil remnants in dry sludge as a reference index. Remixing experiments were carried out according to a simplex-lattice design,where Sx4056 was used as the demulsifier,petroleum sulfonate as the surfactant and sodium silicate (Na2SiO3) as the dispersant. The surface modification reagent formulation was optimized by a regression equation on the modified effect and based on the amounts of surface modification reagents. The results show that the content of the oil remaining in dry oily sludge is 0.28% of 10.15% oily sludge,when the reagent concentration rises to 3.5 g/L under the optimum experimental conditions.展开更多
Oily cold rolling mill （CRM） sludge is one of the pollutants emitted by iron and steel plants. Recycling oily CRM sludge can not only reduce pollution but also bring social and environmental benefits. In this study,...Oily cold rolling mill （CRM） sludge is one of the pollutants emitted by iron and steel plants. Recycling oily CRM sludge can not only reduce pollution but also bring social and environmental benefits. In this study, using oily CRM sludge as sources of iron oxide, the strontium ferrite powders were synthesized in multiple steps including vacuum distillation, magnetic separation, oxidizing roasting, and solidstate reaction. The optimal technological conditions of vacuum distillation and oxidizing roasting were studied carefully. To consider the effects of Fe203/ SrCO3 tool ratio, calcination temperature, milling time and calcination time on magnetic properties of prepared strontium ferrite powders, the orthogonal experimental method was adopted. The maximum saturation magneti- zation （62.6 mA-m2.g-1） of the synthesized strontium ferrite powders was achieved at the Fe203/SrCO3 mol ratio of 6, 5 h milling time, 1250 ~C calcination temperature, and 1 h calcination time. Strontium ferrite powders syn- thesis method not only provides a cheap, high quality raw material for the production of strontium ferrite powders, but also effectively prevents the environmental pollution.展开更多
The aim of this study was to develop a new approach for the preparation of environmentally friendly, high-value products from oily cold rolling mill(CRM) sludge. Utilizing oily CRM sludge as a source of iron, strontiu...The aim of this study was to develop a new approach for the preparation of environmentally friendly, high-value products from oily cold rolling mill(CRM) sludge. Utilizing oily CRM sludge as a source of iron, strontium hexaferrite(SrFe_(12)O_(19)) powders were prepared by multi-step processes involving acid leaching, chemical conversion treatment, and synthesis by a citrate precursor. The influences of citric acid dosage and the pH of the sol system on the formation, crystallite size, and magnetic properties of the obtained SrFe_(12)O_(19) powders were investigated. High saturation magnetization(74.8 mA·m^2·g^(–1)) and intrinsic coercivities(614.46 mT) were achieved for pH 7.0 of the sol system, for which the molar ratio of citric acid dosage to the total dosage of Fe^(3+) and Sr^(2+) was 1.5. This study presents a new approach to utilizing oily CRM sludge, and even refractory iron-containing solid waste.展开更多
The ultrasonic technique has been demonstrated to be a promising method for the disposal of hazardous oily sludge.However,the separation of oil from the surfaces of the solid particles is still difficult due to the st...The ultrasonic technique has been demonstrated to be a promising method for the disposal of hazardous oily sludge.However,the separation of oil from the surfaces of the solid particles is still difficult due to the strong interaction between the oil and solid particle.In this study,three types of surfactants were used to assist the ultrasonic treatment of oily sludge.The oil component,surface composition,and structure of the solid particle were determined.The results showed that different surfactants had different oil removal abilities.In the three surfactant-assisted sonication systems,the oil removal rate increased during the starting reaction period and then decreased with longer sonication time.The results of four components analysis suggested that surfactant easy to be ionized in water posed a better removal effect on resins,while the amphiphilic surfactant preferred saturates,aromatics and asphaltenes.The morphology analysis indicated that particle size was shattered into smaller ones by the ultrasonic process,and the wettability of the solid surface also changed during this treatment.The characterization of the oil component and solid particle during surfactant-assisted ultrasonication treatment will help to better understand the separation of oil from oily sludge and improve the oil recovery efficiency from oily sludge.展开更多
In this study, an ionic liquid(IL), 1-butyl-2,3-dimmmethylimidazolium hexafluorophosphate([Bmmim][PF6]),was used in combination with a composite solvent of methyl acetate and n-heptane to enhance the oil extraction fr...In this study, an ionic liquid(IL), 1-butyl-2,3-dimmmethylimidazolium hexafluorophosphate([Bmmim][PF6]),was used in combination with a composite solvent of methyl acetate and n-heptane to enhance the oil extraction from oily sludge. The oil recovery increased by approximately 15% compared with that of solvent extraction without [Bmmim][PF6] at the optimal ratios of IL to sludge and solvents to sludge, which were at 2:5(M/M) and 4:1(V/M), respectively. The saturate, aromatic, resin and asphaltene(SARA) analysis revealed that the recovery of resins and asphaltenes was increased by 14% and 38%, respectively, in the solvent extraction with the addition of [Bmmim][PF6]. [Bmmim][PF6] maintained a good performance after its reuse four times. The addition of[Bmmim][PF6] changed the adhesion forces between oil and soil. The IL-assisted solvent extraction procedure followed the pseudo second-order kinetic model, while the unassisted solvent extraction procedure followed the pseudo first-order kinetic model. The results also demonstrated that [Bmmim][PF6] decreased the solvent consumption by approximately 60% each time. Additionally, [Bmmim][PF6] can be easily separated. The results suggested that enhancing the solvent extraction with this IL is a promising way to recover oil from oily sludge with a higher oil recovery rate and lower organic solvent consumption than those with the unassisted solvent extraction method.展开更多
Three-phase centrifuge was used to process oily sludge,and the requirement of mud,oil and water three-phase separation was satisfied through the optimization of parameters. The results showed that when the input quant...Three-phase centrifuge was used to process oily sludge,and the requirement of mud,oil and water three-phase separation was satisfied through the optimization of parameters. The results showed that when the input quantity was lower than 5 m^3/h,the optimal operation parameters of the three-phase centrifuge are shown as follows: the frequency of the main motor and vice motor was 33 and 30 Hz respectively,and the flocculant flow was 0. 7 m^3/h,while the oily sludge temperature was 55 ℃. Water content in the separated sludge decreased from 98% to lower than 70%,and the goal of reduction and harmless treatment of oily sludge could be achieved,which could provide essential conditions for subsequent resource utilization and could be used to guide industrial production.展开更多
On the basis of the characteristics of a highly emulsified solid-liquid phase （fine particles, sticky consistency,black color, and low reuse ratio）, waste rolling oily sludge has been a focal problem in the steel in...On the basis of the characteristics of a highly emulsified solid-liquid phase （fine particles, sticky consistency,black color, and low reuse ratio）, waste rolling oily sludge has been a focal problem in the steel industry. In this article, a solid-liquid phase separation and resource recycling process was described, with pilot test results showing that flocculation-sedimentation is an effective pretreatment, and that the filtration-coagulationvacuum distillation process is simple and feasible with a 53.5% recovery rate for regenerated oil that is qualified for return to the roiling production line. Then,solid phase oil-sludge was extracted by solvents with a 77% metal resource recovery rate and a wide utilization range. Finally, according to the experimental results, a set of feasibility plans for a 50 t/a waste rolling oily sludge solid-liquid separation and resource recycle project was designed, with the expectation of 50% regenerated oil yield, 70% solid metal resource recovery, and a 2. 5-year investment payback period.展开更多
In order to find suitable oily sludge treatment equipment for a produced water treatment station of an oilfield in Iraq,the widely used mechanical dewatering equipments overseas including plate and frame filter,belt p...In order to find suitable oily sludge treatment equipment for a produced water treatment station of an oilfield in Iraq,the widely used mechanical dewatering equipments overseas including plate and frame filter,belt press filter,centrifugal filter and screw press filter were compared and analyzed,and the application situation of screw press filter was investigated at site. The site survey showed that,screw press filter was an integrated equipment combined with functions of concentrating and dewatering,which was characterized by low water content of filter cake,small occupied area,easy to separate,no blocking and can realize self-cleaning,which is suitable to low concentration sludge. Screw press filter can simplify oily sludge treatment process,and save engineering construction and operation cost,which is a better choice for oily sludge dewatering. The design of screw press filter adopted in the produced water treatment station of an oilfield in Iraq was introduced here.展开更多
The purpose of this study is to determine the degree of contamination caused by polycyclic aromatic hydrocarbons (PAHs) in oily sludge and soils around it in the Zhongyuan Oilfield. The contents of polycyclic aro-mati...The purpose of this study is to determine the degree of contamination caused by polycyclic aromatic hydrocarbons (PAHs) in oily sludge and soils around it in the Zhongyuan Oilfield. The contents of polycyclic aro-matic hydrocarbons in oily sludge samples were determined with HPLC. The contents of PAHs of oily sludge from three different oil production plants vary from high to low in the order of the Wenming oily sludge dumping site of No. 3 Oil Production Plant (3W)>the Mazhai oily sludge dumping site of No. 3 Oil Production Plant (3M)>the Wen'er oily sludge dumping site of No. 4 Oil Production Plant (4W). Naphthalene, acenaphthylene, acenaphthene, fluorine and phenanthrene are the major pollutants of PAHs in oily sludge. The contents of PAHs in soil samples around the oily sludge dumping sites vary widely from 434.49 to 2408.8 ng/g. Naphthalene, acenaphthene, fluorine, phenanthrene and pyrene are the characteristic factors of PAHs in soil samples of 3M and 3W, and naphthalene, acenaphthene, fluorine and phenanthrene are the characteristic factors of PAHs in soil samples of 4W. According to these data and the ratios of Fl/Py, PAHs in oily sludge samples come mainly from petrogenic sources, and soil samples are divided into petrogenic soil samples and mixed-source soil samples, and both petrogenic and pyrogenic soil samples in terms of the sources of PAHs. The classification by Nemero index P indicates that soils around the oily sludge dumping sites have been seriously polluted.展开更多
Oil fields present a potential ecological risk to nearby farmland soil. Here we present a new method designed to evaluate the ability of winter wheat(Triticum aestivum) to contribute to the dissipation of polycyclic a...Oil fields present a potential ecological risk to nearby farmland soil. Here we present a new method designed to evaluate the ability of winter wheat(Triticum aestivum) to contribute to the dissipation of polycyclic aromatic hydrocarbons(PAHs), which are priority pollutants in soils contaminated by oily sludge. The influence of different doses of oily sludge on the dissipation of PAHs was studied along with individual PAH profiles in soils after different periods of plant growth. Five soil samples were artificially contaminated with different percentages of oily sludge(0 %, 5 %, 10 %, 15 % and 20 %). Winter wheat grew in the oily sludge–amended soils for 265 days.PAH content in the soils was monitored over the course of the study. The rate of PAH dissipation is related to the properties of different PAHs, period of winter wheat growth, and oily sludge application dose. Analysis for treated soils indicates that the dissipation of PAHs increased significantly over the first 212 days, followed by minimal changes over the final 53 days of treatment. In contrast, PAH dissipation slowed with increasing oily sludge application. For each PAH, the experimental results showed a significant compound-dependent trend. Winter wheat in the present study significantly enhanced the dissipation of PAHs in oily sludge–contaminated soil.展开更多
The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes...The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes its application limited.In view of this,the pressurization process mathematical model of the DSSP was established based on the geometric model of the pump.By using this model,the pressurization characteristics of DSSP and the influence of working parameters on the pressurization process were studied combined with the principle of back-flow pressurization.Analysis results show that the instantaneous pressurization process could be realized mainly depending on the reflux pressurization from the outlet chamber to the pressurization chamber when the screw rotor rotating angle is located at-5°to+5°.The pressure in the pressurization chamber will increase with the increase of working parameters which include inlet pressure,outlet pressure,screw rotation velocity and dynamic viscosity of fluid medium in the area of flow-back pressurization.The screw rotation velocity and the viscosity of the conveying medium have significant effects on the peak pressure in the pressurization chamber,and the peak pressure in the pressurization chamber is proportional to the screw rotation velocity and the dynamic viscosity coefficient of the conveying medium.The proportional coefficient between the peak pressure and the screw rotation velocity is 6.29×10~4.The proportional coefficient between the peak pressure and the dynamic viscosity of the conveying medium is 6.28×10~6.展开更多
Oily sludge was recognized as a kind of hazardous wastes,so recycling its high content of petroleum hydrocarbons can contribute to the clean environment.In this study,oily sludge was subjected to continous ultrasonic ...Oily sludge was recognized as a kind of hazardous wastes,so recycling its high content of petroleum hydrocarbons can contribute to the clean environment.In this study,oily sludge was subjected to continous ultrasonic extraction with an acetone/carbon disulfide(CS2)mixture solvent.Fourier transform infrared spectroscopy(FTIRS),gas chromatography/mass spectrometry(GC/MS),and Quadrupole exactive Orbitrap mass spectrometry(QPEOTMS)were used to analyze the oil phase compounds from oily sludge.The n-alkanes ranging from C8 to C31 hydrocarbons were detected in oil phase.Compared with the analysis results of GC/MS,more heteroatom-containing compounds(HACOCs)of oil phase such as O3,O4,N2Oo and N3Oo(o=0—3)could be detected by using the QPEOTMS analysis.Overall,these findings will potentially contribute to the clean and efficient utilization of oily sludge.展开更多
The purpose of this study is to comparatively investigate the plant uptake, accumulation and translocation behaviors of polycyclic aromatic hydrocarbons (PAHs) as priority pollutants in soil contaminated with oily slu...The purpose of this study is to comparatively investigate the plant uptake, accumulation and translocation behaviors of polycyclic aromatic hydrocarbons (PAHs) as priority pollutants in soil contaminated with oily sludge. The influence of different oily sludge application doses on the uptake of contaminants was studied together with the profile of individual PAH in roots, straws and leaves of winter wheat. Pot experiments were conducted using oily sludge application doses of 0, 5, 10, 15 and 20 percent, respectively. The total PAHs contents of control soil and oily sludge were 16.96 and 3504.66 μg/g, respectively. Analysis for the contents of the 16 PAHs was carried out with a HPLC-UV using plant tissue samples obtained at the 265th day of growth. The total PAHs contents in treated winter wheat were 9.02-334.81 ng/g for roots, 8.45-336.52 ng/g for straws and 10.70-406.32 ng/g for leaves. In addition to 5% of oily sludge dose, the total PAHs content in leaves was always highest under other doses of oily sludge application. With respect to individual PAH, the content did not show a significant plant tissue related trend. However, both the total content and individual content of PAHs in treated winter wheat tissues did increase with increasing oily sludge application dose. Another analysis for the control soil indicates that the degradation rate of PAHs was significantly enhanced by winter wheat after 265 days of growth based on the residual concentrations of PAHs in planted and unplanted soils.展开更多
基金Project(50974119) supported by the National Natural Science Foundation of ChinaProject(2006A019) supported by the Science and Technology Fund of China University of Mining and Technology
文摘Based on the analysis of the properties of oily sludge samples,the effect of modification parameters,such as liquid to solid (L/S) ratio,agitation temperature,agitation intensity,agitation time and pH on the modification of oily sludge was investigated with the content of oil remnants in dry sludge as a reference index. Remixing experiments were carried out according to a simplex-lattice design,where Sx4056 was used as the demulsifier,petroleum sulfonate as the surfactant and sodium silicate (Na2SiO3) as the dispersant. The surface modification reagent formulation was optimized by a regression equation on the modified effect and based on the amounts of surface modification reagents. The results show that the content of the oil remaining in dry oily sludge is 0.28% of 10.15% oily sludge,when the reagent concentration rises to 3.5 g/L under the optimum experimental conditions.
基金supported by the National Key Technology R&D Program (Nos. 2012BAC02B01, 2012BAC12B05, 2011BAE13B07, and 2011BAC10B02)the National High Technology Research and Development Program of China (No. 2012AA063202)+2 种基金the National Natural Science Foundation of China (Nos. 51174247 and 51004011)the Science and Technology Program of Guangdong Province, China (No. 2010A030200003)the Ph.D. Programs Foundation of the Ministry of Education of China (No. 2010000612003)
文摘Oily cold rolling mill （CRM） sludge is one of the pollutants emitted by iron and steel plants. Recycling oily CRM sludge can not only reduce pollution but also bring social and environmental benefits. In this study, using oily CRM sludge as sources of iron oxide, the strontium ferrite powders were synthesized in multiple steps including vacuum distillation, magnetic separation, oxidizing roasting, and solidstate reaction. The optimal technological conditions of vacuum distillation and oxidizing roasting were studied carefully. To consider the effects of Fe203/ SrCO3 tool ratio, calcination temperature, milling time and calcination time on magnetic properties of prepared strontium ferrite powders, the orthogonal experimental method was adopted. The maximum saturation magneti- zation （62.6 mA-m2.g-1） of the synthesized strontium ferrite powders was achieved at the Fe203/SrCO3 mol ratio of 6, 5 h milling time, 1250 ~C calcination temperature, and 1 h calcination time. Strontium ferrite powders syn- thesis method not only provides a cheap, high quality raw material for the production of strontium ferrite powders, but also effectively prevents the environmental pollution.
基金financially supported by the National Natural Science Foundation of China (Nos. 51502014 and 51672024)the Fundamental Research Funds for the Central Universities (No: FRF-TP-17-1812)the program of China Scholarships Council (No. 201806465040)
文摘The aim of this study was to develop a new approach for the preparation of environmentally friendly, high-value products from oily cold rolling mill(CRM) sludge. Utilizing oily CRM sludge as a source of iron, strontium hexaferrite(SrFe_(12)O_(19)) powders were prepared by multi-step processes involving acid leaching, chemical conversion treatment, and synthesis by a citrate precursor. The influences of citric acid dosage and the pH of the sol system on the formation, crystallite size, and magnetic properties of the obtained SrFe_(12)O_(19) powders were investigated. High saturation magnetization(74.8 mA·m^2·g^(–1)) and intrinsic coercivities(614.46 mT) were achieved for pH 7.0 of the sol system, for which the molar ratio of citric acid dosage to the total dosage of Fe^(3+) and Sr^(2+) was 1.5. This study presents a new approach to utilizing oily CRM sludge, and even refractory iron-containing solid waste.
基金financial support from the National Natural Science Foundation of China(Nos.41977142 and 41807133)the special fund of State Key Joint Laboratory of Environment Simulation and Pollution Control(No.18K05ESPCT)。
文摘The ultrasonic technique has been demonstrated to be a promising method for the disposal of hazardous oily sludge.However,the separation of oil from the surfaces of the solid particles is still difficult due to the strong interaction between the oil and solid particle.In this study,three types of surfactants were used to assist the ultrasonic treatment of oily sludge.The oil component,surface composition,and structure of the solid particle were determined.The results showed that different surfactants had different oil removal abilities.In the three surfactant-assisted sonication systems,the oil removal rate increased during the starting reaction period and then decreased with longer sonication time.The results of four components analysis suggested that surfactant easy to be ionized in water posed a better removal effect on resins,while the amphiphilic surfactant preferred saturates,aromatics and asphaltenes.The morphology analysis indicated that particle size was shattered into smaller ones by the ultrasonic process,and the wettability of the solid surface also changed during this treatment.The characterization of the oil component and solid particle during surfactant-assisted ultrasonication treatment will help to better understand the separation of oil from oily sludge and improve the oil recovery efficiency from oily sludge.
基金financial support from the National Natural Science Foundation of China(Nos.41807133 and 41977142)the special fund of State Key Joint Laboratory of Environment Simulation and Pollution Control(No.18K05ESPCT)the Fundamental Research Funds for the Central Universities(PT1915)。
文摘In this study, an ionic liquid(IL), 1-butyl-2,3-dimmmethylimidazolium hexafluorophosphate([Bmmim][PF6]),was used in combination with a composite solvent of methyl acetate and n-heptane to enhance the oil extraction from oily sludge. The oil recovery increased by approximately 15% compared with that of solvent extraction without [Bmmim][PF6] at the optimal ratios of IL to sludge and solvents to sludge, which were at 2:5(M/M) and 4:1(V/M), respectively. The saturate, aromatic, resin and asphaltene(SARA) analysis revealed that the recovery of resins and asphaltenes was increased by 14% and 38%, respectively, in the solvent extraction with the addition of [Bmmim][PF6]. [Bmmim][PF6] maintained a good performance after its reuse four times. The addition of[Bmmim][PF6] changed the adhesion forces between oil and soil. The IL-assisted solvent extraction procedure followed the pseudo second-order kinetic model, while the unassisted solvent extraction procedure followed the pseudo first-order kinetic model. The results also demonstrated that [Bmmim][PF6] decreased the solvent consumption by approximately 60% each time. Additionally, [Bmmim][PF6] can be easily separated. The results suggested that enhancing the solvent extraction with this IL is a promising way to recover oil from oily sludge with a higher oil recovery rate and lower organic solvent consumption than those with the unassisted solvent extraction method.
文摘Three-phase centrifuge was used to process oily sludge,and the requirement of mud,oil and water three-phase separation was satisfied through the optimization of parameters. The results showed that when the input quantity was lower than 5 m^3/h,the optimal operation parameters of the three-phase centrifuge are shown as follows: the frequency of the main motor and vice motor was 33 and 30 Hz respectively,and the flocculant flow was 0. 7 m^3/h,while the oily sludge temperature was 55 ℃. Water content in the separated sludge decreased from 98% to lower than 70%,and the goal of reduction and harmless treatment of oily sludge could be achieved,which could provide essential conditions for subsequent resource utilization and could be used to guide industrial production.
文摘On the basis of the characteristics of a highly emulsified solid-liquid phase （fine particles, sticky consistency,black color, and low reuse ratio）, waste rolling oily sludge has been a focal problem in the steel industry. In this article, a solid-liquid phase separation and resource recycling process was described, with pilot test results showing that flocculation-sedimentation is an effective pretreatment, and that the filtration-coagulationvacuum distillation process is simple and feasible with a 53.5% recovery rate for regenerated oil that is qualified for return to the roiling production line. Then,solid phase oil-sludge was extracted by solvents with a 77% metal resource recovery rate and a wide utilization range. Finally, according to the experimental results, a set of feasibility plans for a 50 t/a waste rolling oily sludge solid-liquid separation and resource recycle project was designed, with the expectation of 50% regenerated oil yield, 70% solid metal resource recovery, and a 2. 5-year investment payback period.
文摘In order to find suitable oily sludge treatment equipment for a produced water treatment station of an oilfield in Iraq,the widely used mechanical dewatering equipments overseas including plate and frame filter,belt press filter,centrifugal filter and screw press filter were compared and analyzed,and the application situation of screw press filter was investigated at site. The site survey showed that,screw press filter was an integrated equipment combined with functions of concentrating and dewatering,which was characterized by low water content of filter cake,small occupied area,easy to separate,no blocking and can realize self-cleaning,which is suitable to low concentration sludge. Screw press filter can simplify oily sludge treatment process,and save engineering construction and operation cost,which is a better choice for oily sludge dewatering. The design of screw press filter adopted in the produced water treatment station of an oilfield in Iraq was introduced here.
基金supported by the Shandong Provincial Natural Science Foundation of China (Y2007E03)
文摘The purpose of this study is to determine the degree of contamination caused by polycyclic aromatic hydrocarbons (PAHs) in oily sludge and soils around it in the Zhongyuan Oilfield. The contents of polycyclic aro-matic hydrocarbons in oily sludge samples were determined with HPLC. The contents of PAHs of oily sludge from three different oil production plants vary from high to low in the order of the Wenming oily sludge dumping site of No. 3 Oil Production Plant (3W)>the Mazhai oily sludge dumping site of No. 3 Oil Production Plant (3M)>the Wen'er oily sludge dumping site of No. 4 Oil Production Plant (4W). Naphthalene, acenaphthylene, acenaphthene, fluorine and phenanthrene are the major pollutants of PAHs in oily sludge. The contents of PAHs in soil samples around the oily sludge dumping sites vary widely from 434.49 to 2408.8 ng/g. Naphthalene, acenaphthene, fluorine, phenanthrene and pyrene are the characteristic factors of PAHs in soil samples of 3M and 3W, and naphthalene, acenaphthene, fluorine and phenanthrene are the characteristic factors of PAHs in soil samples of 4W. According to these data and the ratios of Fl/Py, PAHs in oily sludge samples come mainly from petrogenic sources, and soil samples are divided into petrogenic soil samples and mixed-source soil samples, and both petrogenic and pyrogenic soil samples in terms of the sources of PAHs. The classification by Nemero index P indicates that soils around the oily sludge dumping sites have been seriously polluted.
基金jointly supported by National Natural Science Foundation of China(41541025)Open Research Fund Program of Shandong Provincial Key Laboratory of Eco-Environmental Science for Yellow River Delta(Binzhou University)(2015KFJJ01)
文摘Oil fields present a potential ecological risk to nearby farmland soil. Here we present a new method designed to evaluate the ability of winter wheat(Triticum aestivum) to contribute to the dissipation of polycyclic aromatic hydrocarbons(PAHs), which are priority pollutants in soils contaminated by oily sludge. The influence of different doses of oily sludge on the dissipation of PAHs was studied along with individual PAH profiles in soils after different periods of plant growth. Five soil samples were artificially contaminated with different percentages of oily sludge(0 %, 5 %, 10 %, 15 % and 20 %). Winter wheat grew in the oily sludge–amended soils for 265 days.PAH content in the soils was monitored over the course of the study. The rate of PAH dissipation is related to the properties of different PAHs, period of winter wheat growth, and oily sludge application dose. Analysis for treated soils indicates that the dissipation of PAHs increased significantly over the first 212 days, followed by minimal changes over the final 53 days of treatment. In contrast, PAH dissipation slowed with increasing oily sludge application. For each PAH, the experimental results showed a significant compound-dependent trend. Winter wheat in the present study significantly enhanced the dissipation of PAHs in oily sludge–contaminated soil.
基金supported by National Key R&D Program of China[NO.2020YFB2010002]National Natural Science Foundation of China[NO.51706247,NO.51975585]the Fundamental Research Funds for the Central Universities and the Opening Fund of National Engineering Laboratory of Offshore Geophysical and Exploration Equipment[NO.20CX02312A]
文摘The disc-seal single screw pump(DSSP)used in the field of high viscosity oily sludge transport has a huge advantage.However,there is no research on the pressurization characteristics of the DSSP at present,which makes its application limited.In view of this,the pressurization process mathematical model of the DSSP was established based on the geometric model of the pump.By using this model,the pressurization characteristics of DSSP and the influence of working parameters on the pressurization process were studied combined with the principle of back-flow pressurization.Analysis results show that the instantaneous pressurization process could be realized mainly depending on the reflux pressurization from the outlet chamber to the pressurization chamber when the screw rotor rotating angle is located at-5°to+5°.The pressure in the pressurization chamber will increase with the increase of working parameters which include inlet pressure,outlet pressure,screw rotation velocity and dynamic viscosity of fluid medium in the area of flow-back pressurization.The screw rotation velocity and the viscosity of the conveying medium have significant effects on the peak pressure in the pressurization chamber,and the peak pressure in the pressurization chamber is proportional to the screw rotation velocity and the dynamic viscosity coefficient of the conveying medium.The proportional coefficient between the peak pressure and the screw rotation velocity is 6.29×10~4.The proportional coefficient between the peak pressure and the dynamic viscosity of the conveying medium is 6.28×10~6.
基金This work was supported by the Future Scientists Program of China University of Mining and Technology(2020WLKXJ019).
文摘Oily sludge was recognized as a kind of hazardous wastes,so recycling its high content of petroleum hydrocarbons can contribute to the clean environment.In this study,oily sludge was subjected to continous ultrasonic extraction with an acetone/carbon disulfide(CS2)mixture solvent.Fourier transform infrared spectroscopy(FTIRS),gas chromatography/mass spectrometry(GC/MS),and Quadrupole exactive Orbitrap mass spectrometry(QPEOTMS)were used to analyze the oil phase compounds from oily sludge.The n-alkanes ranging from C8 to C31 hydrocarbons were detected in oil phase.Compared with the analysis results of GC/MS,more heteroatom-containing compounds(HACOCs)of oil phase such as O3,O4,N2Oo and N3Oo(o=0—3)could be detected by using the QPEOTMS analysis.Overall,these findings will potentially contribute to the clean and efficient utilization of oily sludge.
基金supported jointly by the National Natural Science Foundation of China (20977055)the State Key Laboratory Foundation of Geological Processes and Mineral Resources, China University of Geosciences (GPMR201102)
文摘The purpose of this study is to comparatively investigate the plant uptake, accumulation and translocation behaviors of polycyclic aromatic hydrocarbons (PAHs) as priority pollutants in soil contaminated with oily sludge. The influence of different oily sludge application doses on the uptake of contaminants was studied together with the profile of individual PAH in roots, straws and leaves of winter wheat. Pot experiments were conducted using oily sludge application doses of 0, 5, 10, 15 and 20 percent, respectively. The total PAHs contents of control soil and oily sludge were 16.96 and 3504.66 μg/g, respectively. Analysis for the contents of the 16 PAHs was carried out with a HPLC-UV using plant tissue samples obtained at the 265th day of growth. The total PAHs contents in treated winter wheat were 9.02-334.81 ng/g for roots, 8.45-336.52 ng/g for straws and 10.70-406.32 ng/g for leaves. In addition to 5% of oily sludge dose, the total PAHs content in leaves was always highest under other doses of oily sludge application. With respect to individual PAH, the content did not show a significant plant tissue related trend. However, both the total content and individual content of PAHs in treated winter wheat tissues did increase with increasing oily sludge application dose. Another analysis for the control soil indicates that the degradation rate of PAHs was significantly enhanced by winter wheat after 265 days of growth based on the residual concentrations of PAHs in planted and unplanted soils.
