The aging behavior of polyurethane adhesive in medium was investigated and compared by means of scanning electronic microscopy（SEM）, infrared spectroscopy（IR）, interface analysis and shearing strength test. The ex...The aging behavior of polyurethane adhesive in medium was investigated and compared by means of scanning electronic microscopy（SEM）, infrared spectroscopy（IR）, interface analysis and shearing strength test. The experimental results show that the shear strength of polyurethane adhesive in salt water is decreased more quickly than that in water. Na^＋ and Cl^- ions could make the polyurethane adhesive age faster and the interface metal corrosion. The high temperature accelerates the diffusion of water molecule, Na^＋ and Cl^- ions and the degradation of the giant molecule.展开更多
This investigation was conducted to determine the feasibility of using a two-component polyurethane （PUR） adhesive, with special waterproof properties, in constructing wooden structures. We designed and conducted te...This investigation was conducted to determine the feasibility of using a two-component polyurethane （PUR） adhesive, with special waterproof properties, in constructing wooden structures. We designed and conducted tests to compare the shear strength and adhesion performance of PUR with polyvinyl acetate （PVAc） adhesive on block-shear specimens constructed of oriental beech （Fagus orientalis L.）, fir （Abies alba Mill.）, poplar （Populus deltoides Bartr.）, white oak （Quercus alba L.）, sycamore （Platanus orientalis L.） and white walnut （Juglans cinerea L.）. The values of the percentage of wood failure were also determined in specimens constructed with each adhesive. The highest shear strength values of both adhesives were obtained in specimens constructed of beech, while the lowest shear strength values were obtained in fir and poplar specimens. Average shear strength of the PUR adhesive was 16.5% higher than that of the PVAc adhesive. Specimens constructed of fir, poplar and sycamore were characterised by the highest percentages of wood failure, whereas the lowest average percentages of wood failure were obtained in beech and oak specimens. With the exception of oak specimens, there was no statistically significant difference between percentage of wood failure among the PUR and PVAc adhesives. Generally, the PUR adhesive showed an acceptable adhesion performance on wood materials used in our study.展开更多
Banana pseudo-stem was liquefied in the mixture of polyhydric alcohols of polyethylene glycol(PEG400) and glycerol. Hydroxyl value of liquefied products ranged from 294.8 to 370.2 mg KOH/g and M_n was about 430. Lique...Banana pseudo-stem was liquefied in the mixture of polyhydric alcohols of polyethylene glycol(PEG400) and glycerol. Hydroxyl value of liquefied products ranged from 294.8 to 370.2 mg KOH/g and M_n was about 430. Liquefied products(LBPP) could be used as raw materials for polyurethane by reacting with 4, 4'-diphenylmethane diisocyanate(4, 4'-MDI) and PEG400 to synthesize liquefied product-based polyurethane(LBPP-PU) adhesive. To analyze in depth the creation of urethane linkage among LBPP, PEG400 and 4, 4'-MDI, factors which had effects on the residue content were all investigated. They were characterized by FT-IR and TG. The shear strength of LBPP-PU adhesive was improved when decreasing the percentage of the substitution of PEG400 by LBPP. The adhesive strength was obtained from T-peel of aspen/polyurethane adhesive joints, and the maximum lap shear strength(4.40 MPa) was obtained when 16.70% of LBPP was added to the LBPP & PEG400 system.展开更多
Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals ...Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals and materials. Poly（propylene carbonate）（PPC） is an emerging CO_2-based material. Herein, we report the design, synthesis and characterization of the reactive hot melt polyurethane adhesive（RHMPA） based on PPC polyol. The resultant RHMPAs exhibit good adhesion properties to multiple substrates including plastics（PC, PMMA, ABS） and metals（aluminium, steel）, which is comparable to or even better than conventional RHMPAs prepared from petro-based polyol. Furthermore, the PPC-based RHMPAs have tunable mechanical properties, and are thermally stable in the typical working range of bonding process（up to 270 °C）. The study is expected to expand the applications of PPC and provide a new type of CO_2-based renewable and eco-friendly materials.展开更多
In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs ...In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs and AFM roughness profiles of treated samples and the contrast groups were obtained.Besides,XPS survey spectrums and high resolution spectrums were also investigated.The adhesion test revealed that ion bombardment could improve the adhesion to the polyurethane coating substrate.A better etching result of oxygen ions versus nitrogen predicts a higher bonding strength of zirconium coating on polyurethane and,indeed,the highest bonding strengths are for oxygen ion bombardment upto 13.3 MPa.As demonstrated in X-ray photoelectron spectroscopy,the oxygen ion also helps to introduce more active groups,and,therefore,it achieves a high value of adhesion strength.展开更多
Polyurethane foam adhesive(PFA)has been introduced as an alternative stabilizer in geotechnical applications because PFA can improve the engineering characteristics of soil by filling the pore space and generating adh...Polyurethane foam adhesive(PFA)has been introduced as an alternative stabilizer in geotechnical applications because PFA can improve the engineering characteristics of soil by filling the pore space and generating adhesive bonding among the particles.However,the dynamic properties of PFA-reinforced soils are not well understood.To analyze the dynamic characteristics of PFA-reinforced gravels,a series of cyclic triaxial tests were carried out to investigate the shear modulus and damping ratio of PFA-reinforced gravels,and to determine the corresponding effects of the PFA content,confining pressure,consolidation stress ratio and loading frequency.The results showed that the shear modulus increased,and the damping ratio decreased as the PFA content,confining pressure and consolidation stress ratio increased.In contrast,the effect of the loading frequency,which ranged from 0.05 to 1 Hz,was negligible.A modified hyperbolic empirical model can consider the effect of the PFA content on the maximum shear modulus and predict the relationship between the normalized shear modulus and the normalized shear strain was proposed.Moreover,the upper and lower bounds of the damping ratio were also proposed.展开更多
文摘The aging behavior of polyurethane adhesive in medium was investigated and compared by means of scanning electronic microscopy（SEM）, infrared spectroscopy（IR）, interface analysis and shearing strength test. The experimental results show that the shear strength of polyurethane adhesive in salt water is decreased more quickly than that in water. Na^＋ and Cl^- ions could make the polyurethane adhesive age faster and the interface metal corrosion. The high temperature accelerates the diffusion of water molecule, Na^＋ and Cl^- ions and the degradation of the giant molecule.
文摘This investigation was conducted to determine the feasibility of using a two-component polyurethane （PUR） adhesive, with special waterproof properties, in constructing wooden structures. We designed and conducted tests to compare the shear strength and adhesion performance of PUR with polyvinyl acetate （PVAc） adhesive on block-shear specimens constructed of oriental beech （Fagus orientalis L.）, fir （Abies alba Mill.）, poplar （Populus deltoides Bartr.）, white oak （Quercus alba L.）, sycamore （Platanus orientalis L.） and white walnut （Juglans cinerea L.）. The values of the percentage of wood failure were also determined in specimens constructed with each adhesive. The highest shear strength values of both adhesives were obtained in specimens constructed of beech, while the lowest shear strength values were obtained in fir and poplar specimens. Average shear strength of the PUR adhesive was 16.5% higher than that of the PVAc adhesive. Specimens constructed of fir, poplar and sycamore were characterised by the highest percentages of wood failure, whereas the lowest average percentages of wood failure were obtained in beech and oak specimens. With the exception of oak specimens, there was no statistically significant difference between percentage of wood failure among the PUR and PVAc adhesives. Generally, the PUR adhesive showed an acceptable adhesion performance on wood materials used in our study.
基金Funded by the National Science Foundation of China(No.51263006)the Ministry of Education Ph D Advisor Class Special Fund(No.20134601110004)+2 种基金the Hainan Province of Key Projects(ZDXM20130086)the Hainan Province International Science and Technology Cooperation Specific(No.KJHZ2014-02)the Hainan Province Natural Science Foundation(No.314074)
文摘Banana pseudo-stem was liquefied in the mixture of polyhydric alcohols of polyethylene glycol(PEG400) and glycerol. Hydroxyl value of liquefied products ranged from 294.8 to 370.2 mg KOH/g and M_n was about 430. Liquefied products(LBPP) could be used as raw materials for polyurethane by reacting with 4, 4'-diphenylmethane diisocyanate(4, 4'-MDI) and PEG400 to synthesize liquefied product-based polyurethane(LBPP-PU) adhesive. To analyze in depth the creation of urethane linkage among LBPP, PEG400 and 4, 4'-MDI, factors which had effects on the residue content were all investigated. They were characterized by FT-IR and TG. The shear strength of LBPP-PU adhesive was improved when decreasing the percentage of the substitution of PEG400 by LBPP. The adhesive strength was obtained from T-peel of aspen/polyurethane adhesive joints, and the maximum lap shear strength(4.40 MPa) was obtained when 16.70% of LBPP was added to the LBPP & PEG400 system.
基金financially supported by the National Natural Science Foundation of China(Nos.21574019 and 21304015)the Fundamental Research Funds for the Central Universities and the DHU Distinguished Young Professor Program(No.B201303)
文摘Tens of billion metric tons of anthropogenic CO_2 discharged from the burning of fossil fuels lead to an enormous environmental and resource burden. It is charming to transform CO_2 to desirable, economical chemicals and materials. Poly（propylene carbonate）（PPC） is an emerging CO_2-based material. Herein, we report the design, synthesis and characterization of the reactive hot melt polyurethane adhesive（RHMPA） based on PPC polyol. The resultant RHMPAs exhibit good adhesion properties to multiple substrates including plastics（PC, PMMA, ABS） and metals（aluminium, steel）, which is comparable to or even better than conventional RHMPAs prepared from petro-based polyol. Furthermore, the PPC-based RHMPAs have tunable mechanical properties, and are thermally stable in the typical working range of bonding process（up to 270 °C）. The study is expected to expand the applications of PPC and provide a new type of CO_2-based renewable and eco-friendly materials.
文摘In order to improve the adhesion of the middle frequency magnetic sputtered zirconium coating on a polyurethane film,an anode layer source was used to pretreat the polyurethane film with nitrogen and oxygen ions.SEMs and AFM roughness profiles of treated samples and the contrast groups were obtained.Besides,XPS survey spectrums and high resolution spectrums were also investigated.The adhesion test revealed that ion bombardment could improve the adhesion to the polyurethane coating substrate.A better etching result of oxygen ions versus nitrogen predicts a higher bonding strength of zirconium coating on polyurethane and,indeed,the highest bonding strengths are for oxygen ion bombardment upto 13.3 MPa.As demonstrated in X-ray photoelectron spectroscopy,the oxygen ion also helps to introduce more active groups,and,therefore,it achieves a high value of adhesion strength.
基金the National Natural Science Foundation of China(Grant Nos.51709139 and 51678094)。
文摘Polyurethane foam adhesive(PFA)has been introduced as an alternative stabilizer in geotechnical applications because PFA can improve the engineering characteristics of soil by filling the pore space and generating adhesive bonding among the particles.However,the dynamic properties of PFA-reinforced soils are not well understood.To analyze the dynamic characteristics of PFA-reinforced gravels,a series of cyclic triaxial tests were carried out to investigate the shear modulus and damping ratio of PFA-reinforced gravels,and to determine the corresponding effects of the PFA content,confining pressure,consolidation stress ratio and loading frequency.The results showed that the shear modulus increased,and the damping ratio decreased as the PFA content,confining pressure and consolidation stress ratio increased.In contrast,the effect of the loading frequency,which ranged from 0.05 to 1 Hz,was negligible.A modified hyperbolic empirical model can consider the effect of the PFA content on the maximum shear modulus and predict the relationship between the normalized shear modulus and the normalized shear strain was proposed.Moreover,the upper and lower bounds of the damping ratio were also proposed.
