The Birimian Baguiomo formations are located in the northern part of the Boromo greenstone belt. In this belt, the volcanic rocks (tholeiitic basalt, calcalkaline basalt, andesite) hosting the gold mineralization are ...The Birimian Baguiomo formations are located in the northern part of the Boromo greenstone belt. In this belt, the volcanic rocks (tholeiitic basalt, calcalkaline basalt, andesite) hosting the gold mineralization are located in the Kwademen-Baguiomo shear zone. This mineralization, located only a few kilometers from the Kwademen gold deposit, is uncharacterized and, together with the latter, could constitute a gold potential capable of being economically exploitable. It is in this sense that this work is carried out with a view to characterizing the gold mineralization of the Baguiomo gold panning site. To carry out this work, we have made direct field measurements, combined with microstructures, and combined all this with data from geochemical rock analysis of the basalts that are the main host formations. Geochemical data show that tholeitic basalts formed from a mantle plume that was emplaced in an oceanic plateau context. Calc-alkaline basalts and andesites are comparable to Paleoproterozoic tholeitic basalts (PTH3), which are slightly enriched in light rare earths. Fertility tests show that these basalts concentrate between 3 and 6 ppb of gold at the time of accretion, which is sufficient for remobilization of this primary gold during the Eburnian orogeny to yield a deposit of around 4 - 5 Moz. Gold mineralization is associated with pyrite crystals when the latter are disseminated in the rock mass, whereas it is associated with hematite in quartz veins concordant with S1 shear deformation. It is mainly the pyrite crystals in the pressure shadows that contain the gold grains, whose development would be synchronous with micro-shear zone reactivation during the first phase of D1<sub>B</sub> deformation. The second phase of D2<sub>B</sub> deformation, which is a crenulation or fracture schistosity, does not significantly affect the shear deformation that controls mineralization.展开更多
Lead isotopic geochemical steep-dipping zone usually exists on inhomogeneous boundaries of earth blocks. Its crossing with the geophysical gradient zone often convergently occurs at giant deposits. Deep structures or ...Lead isotopic geochemical steep-dipping zone usually exists on inhomogeneous boundaries of earth blocks. Its crossing with the geophysical gradient zone often convergently occurs at giant deposits. Deep structures or concealed structural planes obviously have the coupling relationship with the convergent area of mineral deposits. The geochemical steep-dipping zone is usually distributed along the boundary of ancient continental blocks. Its crossing effect with geophysical gradient zone is usually presented as depression or swell of Moho discontinuity on the crossing direction with the ancient continental margin, which would lead to form deep fractures of earth crust at block margins or lead to adjustment of earth crust texture. The deep hydrothermal liquid would rise up along the structural planes to form the convergent areas of mineral deposits. For example, Luonan- Luanchuan area in east Qinling is a typical crossed area of the geochemical steepdipping zone and geophysical gradient zone. The mineral deposit belt extends along EW direction. It was controlled by the geochemical steepdipping zone equidistantly distributed along NE direction like a string of beads controlled by a gravity gradient zone in NE direction and a mantle depression slope. Along a plunging mantle syncline on EW plunging direction, from the east to the west, checkform was distributed which controls synergic crustmantle granoporphyry rocks. Therefore, a convergent mineralization area of Mo, W, Zn and Au giant deposits occurred.展开更多
The Cuobuzha high-Cr chromitites in the western segment of Yarlung Zangbo Suture Zone of Tibet are mainly hosted in the harzburgites as massive type, which are characterized by high concentrations of platinum group el...The Cuobuzha high-Cr chromitites in the western segment of Yarlung Zangbo Suture Zone of Tibet are mainly hosted in the harzburgites as massive type, which are characterized by high concentrations of platinum group elements(PGE) ranging from 380 to 577 ppb, and low Pd/Ir ratios(<0.1). In mid-ocean ridge basalts(MORB)-normalized spidergrams, chromites of the Cuobuzha chromitites are depleted in Al, Ga, V, Mg and Zn, and enriched in Mn and Cr, sharing similar patterns with those of ophiolitic boninites in the Bonin and Thetford Mines. Approximately 20 platinum group mineral(PGM) grains were discovered from the samples, including laurite, erlichmanite, Os-Fe alloy, cuproiridsite, and irarsite. The PGM assemblages indicate that sulfur fugacity was initially low enough to allow the precipitation of Os-Fe alloy and increased thereafter, with the fall in temperature. Primary Fe-Ni and Fe-Cr alloys, which are stable in a highly reduced environment, occur as inclusions within chromites or clinopyroxenes. Calculated results show that the parental magma has an intimate affinity with boninites. Based on our observations, a model is proposed wherein the Cuobuzha chromitites contain high-pressure and low-pressure chromites. Low-pressure chromites were formed via reaction between boninitic melts and peridotites, during which the high-pressure chromites hosting highly reduced minerals were mobilized by melts and were reallocated to podiform chromitites.展开更多
In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main ...In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main objective is to evaluate the efficiency and accuracy of the methods in separation of anomalies on the shear zone gold mineralization.For this purpose,samples were taken from the secondary lithogeochemical environment(stream sediment samples)on the gold mineralization in Saqqez,NW of Iran.Interpretation of the histograms and diagrams showed that the MPD is capable of identifying two phases of mineralization.The fractal method could separate only one phase of change based on the fractal dimension with high concentration areas of the Au element.The spatial analysis showed two mixed subpopulations after U=0 and another subpopulation with very high U values.The MPD analysis followed spatial analysis,which shows the detail of the variations.Six mineralized zones detected from local geochemical exploration results were used for validating the methods mentioned above.The MPD method was able to identify the anomalous areas higher than 90%,whereas the two other methods identified 60%(maximum)of the anomalous areas.The raw data without any estimation for the concentration was used by the MPD method using aminimum of calculations to determine the threshold values.Therefore,the MPD method is more robust than the other methods.The spatial analysis identified the detail soft hegeological and mineralization events that were affected in the study area.MPD is recommended as the best,and the spatial U-analysis is the next reliable method to be used.The fractal method could show more detail of the events and variations in the area with asymmetrical grid net and a higher density of sampling or at the detailed exploration stage.展开更多
A mineral resource zone,rich in resources and energy,is intensively developed and disturbed by human activities,which causes an obvious change of landscapes.Taking Wu’an of Hebei Province,China,as a case study,this p...A mineral resource zone,rich in resources and energy,is intensively developed and disturbed by human activities,which causes an obvious change of landscapes.Taking Wu’an of Hebei Province,China,as a case study,this paper extracts landscape information of mineral resource zones through overlapping mineral resources distribution map and landscape pattern map.And then,various landscape indices are selected for analyzing the effects of grain size(30,60,90,120,150,180,210,240,270 and 300 m)on landscape patterns.Due to different kinds of landscape information transmitted by indices,the changing trends vary with the increase of grain sizes.Accordingly the landscape indices are classified into three types of effects:disturbance,continuity and sustainability,and each type of effect has its own optimal range for grain sizes.Then the optimal range of grain size on landscape patterns in mineral resource zones is gained through a comparison of the effects in various grain sizes of landscape indices.The best first domain of scale covers 30-90 m,with a suitable grain size of 30-60 m before intensive mining and a suitable grain size of 60-90 m after intensive mining.Besides,the suitable grain sizes for reflecting disturbance,continuity and sustainability before intensive mining are 30-60,30-60 and 30-90 m,respectively,however,the sizes are changed to 60-90,60-90 and 30-90 m,respectively,after intensive mining.The results are helpful for rational land use and optimal landscape allocation.展开更多
Singhbhum Shear Zone is a highly mineralized zone having variety of minerals, predominantly those of uranium, copper and some sulphide minerals. From Remote Sensing data it is possible to decipher the regional litholo...Singhbhum Shear Zone is a highly mineralized zone having variety of minerals, predominantly those of uranium, copper and some sulphide minerals. From Remote Sensing data it is possible to decipher the regional lithology, tectonic fabric and also the geomorphic details of a terrain which aid precisely in targeting of metals and minerals. Mapping of mineralized zones can be done using Geospatial Technology in a GIS platform. The present study includes creation of various maps like lithological map, geomorphological map, contours and slope map using satellite data like IRS LISSIV and ASTER DEM which can be used to interprete and correlate the various mineral prospective zones in the study area. Even the alterations of the prevalent mineral zones can be mapped for further utilization strategies. The present work is based on the investigations being carried under ISROSAC Respond Project (Dept. of Space, Govt. of India SAC Code: OGP62, ISRO Code: 10/4/556).展开更多
Gold deposits in shear zones in China can be divided into four types: ductile, brittle-ductile,ductileubrittle and britt1e. Among them, each type has its own geochemical characteristics: the Hetai gold deposit in Guan...Gold deposits in shear zones in China can be divided into four types: ductile, brittle-ductile,ductileubrittle and britt1e. Among them, each type has its own geochemical characteristics: the Hetai gold deposit in Guangdong province for example, is a kind of mylonite type gold deposit in a ductile shear zone, and the gold ore has the forms of layer and vein; the Erjia gold deposit formed in a brittleuductile shear zone, and the gold ore, being of two types, mylonite type and cataclasticaltered rock type, has the form of vein; the Shangguan gold deposit, Henan Province, was located in a ductile-brittle shear zone, and the gold ore is of two types, cataclastic-altered rock type and quartz vein type; and the Linglong gold deposit occurs in a brittle shear zone, with the main gold ore of quartz vein type having the forms of vein and lens. Simulating experiments on tectono-controlled formation of gold ores gave us the idea that not only the samples underwent crack deformation, but also changes occurred in chemical composition of minerals, and also caused gold to be remobilized and finally filled into the newlyuproduced fissures.展开更多
Altai mineralization zone is located in the north-west of Xinjiang Uigur Autonomous Region.Throughout the zone 70 and more mineral species have been discovered.There are 46 mineral spe-cies reserve of which hag been v...Altai mineralization zone is located in the north-west of Xinjiang Uigur Autonomous Region.Throughout the zone 70 and more mineral species have been discovered.There are 46 mineral spe-cies reserve of which hag been verified.Altai is an importantest place of occurrence of beryllium,lithium,tantalum,niobium and other rare metals.It is also a producing area of high-qualitymuscovite,biotite and other mica.The precious stone,lade and marble are also produced there.展开更多
Through the study of the oxidized zone of the Debao skarn-type Cu-Sn deposit in Guangxi, the authorshave found 14 arsenate minerals, most of which are for the first time reported in China. They are mainly Cuarsenate m...Through the study of the oxidized zone of the Debao skarn-type Cu-Sn deposit in Guangxi, the authorshave found 14 arsenate minerals, most of which are for the first time reported in China. They are mainly Cuarsenate minerals with subordinate Cu-Pb arsenate minerals and minor Fe-Pb-Ba varieties. Based on their paragenesis these minerals may be divided into the following series: (1) the clinoclasite-olivenite-cornwallite- cornubite- debaoite- copper silicarsenate association, (2) the scorodite- carminite- beudan-tite-bayldonite- duftite association, and (3) the scorodite-Ba-bearing pharmacosiderite- dussertite association. Arsenate minerals are formed generally in the oxidized zone of the sulfide-type deposits which lie in thewarm, humid and rainy torrid-subtropical zone with pH=6-8 and contain large amounts of arsenopyrite andcarbonate rocks.展开更多
Two types of gold ores,siliceous mylonite and quartz vein,formed at the first and second stages of mineralization respectively, can be clearly recognized in the shear zone-hosted gold deposit at Jinshan, Jiangxi.Simil...Two types of gold ores,siliceous mylonite and quartz vein,formed at the first and second stages of mineralization respectively, can be clearly recognized in the shear zone-hosted gold deposit at Jinshan, Jiangxi.Similarity in REE and trace elements between the siliceous mylonite and the country rocks indicates that the ore metals were supplied by the surrounding strata during the first stage of mineralization.On the other hand, as indicated by fluid inclusion data,the ore-forming fluid at the second stage was of meteoric origin and the precipitation of gold was caused by phase separation.展开更多
文摘The Birimian Baguiomo formations are located in the northern part of the Boromo greenstone belt. In this belt, the volcanic rocks (tholeiitic basalt, calcalkaline basalt, andesite) hosting the gold mineralization are located in the Kwademen-Baguiomo shear zone. This mineralization, located only a few kilometers from the Kwademen gold deposit, is uncharacterized and, together with the latter, could constitute a gold potential capable of being economically exploitable. It is in this sense that this work is carried out with a view to characterizing the gold mineralization of the Baguiomo gold panning site. To carry out this work, we have made direct field measurements, combined with microstructures, and combined all this with data from geochemical rock analysis of the basalts that are the main host formations. Geochemical data show that tholeitic basalts formed from a mantle plume that was emplaced in an oceanic plateau context. Calc-alkaline basalts and andesites are comparable to Paleoproterozoic tholeitic basalts (PTH3), which are slightly enriched in light rare earths. Fertility tests show that these basalts concentrate between 3 and 6 ppb of gold at the time of accretion, which is sufficient for remobilization of this primary gold during the Eburnian orogeny to yield a deposit of around 4 - 5 Moz. Gold mineralization is associated with pyrite crystals when the latter are disseminated in the rock mass, whereas it is associated with hematite in quartz veins concordant with S1 shear deformation. It is mainly the pyrite crystals in the pressure shadows that contain the gold grains, whose development would be synchronous with micro-shear zone reactivation during the first phase of D1<sub>B</sub> deformation. The second phase of D2<sub>B</sub> deformation, which is a crenulation or fracture schistosity, does not significantly affect the shear deformation that controls mineralization.
基金Fund of the National Climbing Project!( 95-pre-2 5 -03 ) the Ministry of Geology and Mineral ResourcesStudying Projec
文摘Lead isotopic geochemical steep-dipping zone usually exists on inhomogeneous boundaries of earth blocks. Its crossing with the geophysical gradient zone often convergently occurs at giant deposits. Deep structures or concealed structural planes obviously have the coupling relationship with the convergent area of mineral deposits. The geochemical steep-dipping zone is usually distributed along the boundary of ancient continental blocks. Its crossing effect with geophysical gradient zone is usually presented as depression or swell of Moho discontinuity on the crossing direction with the ancient continental margin, which would lead to form deep fractures of earth crust at block margins or lead to adjustment of earth crust texture. The deep hydrothermal liquid would rise up along the structural planes to form the convergent areas of mineral deposits. For example, Luonan- Luanchuan area in east Qinling is a typical crossed area of the geochemical steepdipping zone and geophysical gradient zone. The mineral deposit belt extends along EW direction. It was controlled by the geochemical steepdipping zone equidistantly distributed along NE direction like a string of beads controlled by a gravity gradient zone in NE direction and a mantle depression slope. Along a plunging mantle syncline on EW plunging direction, from the east to the west, checkform was distributed which controls synergic crustmantle granoporphyry rocks. Therefore, a convergent mineralization area of Mo, W, Zn and Au giant deposits occurred.
基金funded by grants from the Ministry of Science and Technology of China (2014DFR21270)from the China Geological Survey (DD20160023-01 and DD20160022-01)+1 种基金from the National Natural Science Foundation of China (41802034)from the National Science Foundation of China (41720104009, 41672063, 41773029).
文摘The Cuobuzha high-Cr chromitites in the western segment of Yarlung Zangbo Suture Zone of Tibet are mainly hosted in the harzburgites as massive type, which are characterized by high concentrations of platinum group elements(PGE) ranging from 380 to 577 ppb, and low Pd/Ir ratios(<0.1). In mid-ocean ridge basalts(MORB)-normalized spidergrams, chromites of the Cuobuzha chromitites are depleted in Al, Ga, V, Mg and Zn, and enriched in Mn and Cr, sharing similar patterns with those of ophiolitic boninites in the Bonin and Thetford Mines. Approximately 20 platinum group mineral(PGM) grains were discovered from the samples, including laurite, erlichmanite, Os-Fe alloy, cuproiridsite, and irarsite. The PGM assemblages indicate that sulfur fugacity was initially low enough to allow the precipitation of Os-Fe alloy and increased thereafter, with the fall in temperature. Primary Fe-Ni and Fe-Cr alloys, which are stable in a highly reduced environment, occur as inclusions within chromites or clinopyroxenes. Calculated results show that the parental magma has an intimate affinity with boninites. Based on our observations, a model is proposed wherein the Cuobuzha chromitites contain high-pressure and low-pressure chromites. Low-pressure chromites were formed via reaction between boninitic melts and peridotites, during which the high-pressure chromites hosting highly reduced minerals were mobilized by melts and were reallocated to podiform chromitites.
文摘In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main objective is to evaluate the efficiency and accuracy of the methods in separation of anomalies on the shear zone gold mineralization.For this purpose,samples were taken from the secondary lithogeochemical environment(stream sediment samples)on the gold mineralization in Saqqez,NW of Iran.Interpretation of the histograms and diagrams showed that the MPD is capable of identifying two phases of mineralization.The fractal method could separate only one phase of change based on the fractal dimension with high concentration areas of the Au element.The spatial analysis showed two mixed subpopulations after U=0 and another subpopulation with very high U values.The MPD analysis followed spatial analysis,which shows the detail of the variations.Six mineralized zones detected from local geochemical exploration results were used for validating the methods mentioned above.The MPD method was able to identify the anomalous areas higher than 90%,whereas the two other methods identified 60%(maximum)of the anomalous areas.The raw data without any estimation for the concentration was used by the MPD method using aminimum of calculations to determine the threshold values.Therefore,the MPD method is more robust than the other methods.The spatial analysis identified the detail soft hegeological and mineralization events that were affected in the study area.MPD is recommended as the best,and the spatial U-analysis is the next reliable method to be used.The fractal method could show more detail of the events and variations in the area with asymmetrical grid net and a higher density of sampling or at the detailed exploration stage.
基金supported by National Natural Science Foundation of China(Grant No.41101531)Doctoral Fund of Ministry of Education of China(New Teacher Fund)(Grant No.20110022120010)Beijing Higher Education Young Elite Teacher Project(No.YETP0639).
文摘A mineral resource zone,rich in resources and energy,is intensively developed and disturbed by human activities,which causes an obvious change of landscapes.Taking Wu’an of Hebei Province,China,as a case study,this paper extracts landscape information of mineral resource zones through overlapping mineral resources distribution map and landscape pattern map.And then,various landscape indices are selected for analyzing the effects of grain size(30,60,90,120,150,180,210,240,270 and 300 m)on landscape patterns.Due to different kinds of landscape information transmitted by indices,the changing trends vary with the increase of grain sizes.Accordingly the landscape indices are classified into three types of effects:disturbance,continuity and sustainability,and each type of effect has its own optimal range for grain sizes.Then the optimal range of grain size on landscape patterns in mineral resource zones is gained through a comparison of the effects in various grain sizes of landscape indices.The best first domain of scale covers 30-90 m,with a suitable grain size of 30-60 m before intensive mining and a suitable grain size of 60-90 m after intensive mining.Besides,the suitable grain sizes for reflecting disturbance,continuity and sustainability before intensive mining are 30-60,30-60 and 30-90 m,respectively,however,the sizes are changed to 60-90,60-90 and 30-90 m,respectively,after intensive mining.The results are helpful for rational land use and optimal landscape allocation.
文摘Singhbhum Shear Zone is a highly mineralized zone having variety of minerals, predominantly those of uranium, copper and some sulphide minerals. From Remote Sensing data it is possible to decipher the regional lithology, tectonic fabric and also the geomorphic details of a terrain which aid precisely in targeting of metals and minerals. Mapping of mineralized zones can be done using Geospatial Technology in a GIS platform. The present study includes creation of various maps like lithological map, geomorphological map, contours and slope map using satellite data like IRS LISSIV and ASTER DEM which can be used to interprete and correlate the various mineral prospective zones in the study area. Even the alterations of the prevalent mineral zones can be mapped for further utilization strategies. The present work is based on the investigations being carried under ISROSAC Respond Project (Dept. of Space, Govt. of India SAC Code: OGP62, ISRO Code: 10/4/556).
文摘Gold deposits in shear zones in China can be divided into four types: ductile, brittle-ductile,ductileubrittle and britt1e. Among them, each type has its own geochemical characteristics: the Hetai gold deposit in Guangdong province for example, is a kind of mylonite type gold deposit in a ductile shear zone, and the gold ore has the forms of layer and vein; the Erjia gold deposit formed in a brittleuductile shear zone, and the gold ore, being of two types, mylonite type and cataclasticaltered rock type, has the form of vein; the Shangguan gold deposit, Henan Province, was located in a ductile-brittle shear zone, and the gold ore is of two types, cataclastic-altered rock type and quartz vein type; and the Linglong gold deposit occurs in a brittle shear zone, with the main gold ore of quartz vein type having the forms of vein and lens. Simulating experiments on tectono-controlled formation of gold ores gave us the idea that not only the samples underwent crack deformation, but also changes occurred in chemical composition of minerals, and also caused gold to be remobilized and finally filled into the newlyuproduced fissures.
文摘Altai mineralization zone is located in the north-west of Xinjiang Uigur Autonomous Region.Throughout the zone 70 and more mineral species have been discovered.There are 46 mineral spe-cies reserve of which hag been verified.Altai is an importantest place of occurrence of beryllium,lithium,tantalum,niobium and other rare metals.It is also a producing area of high-qualitymuscovite,biotite and other mica.The precious stone,lade and marble are also produced there.
文摘Through the study of the oxidized zone of the Debao skarn-type Cu-Sn deposit in Guangxi, the authorshave found 14 arsenate minerals, most of which are for the first time reported in China. They are mainly Cuarsenate minerals with subordinate Cu-Pb arsenate minerals and minor Fe-Pb-Ba varieties. Based on their paragenesis these minerals may be divided into the following series: (1) the clinoclasite-olivenite-cornwallite- cornubite- debaoite- copper silicarsenate association, (2) the scorodite- carminite- beudan-tite-bayldonite- duftite association, and (3) the scorodite-Ba-bearing pharmacosiderite- dussertite association. Arsenate minerals are formed generally in the oxidized zone of the sulfide-type deposits which lie in thewarm, humid and rainy torrid-subtropical zone with pH=6-8 and contain large amounts of arsenopyrite andcarbonate rocks.
文摘Two types of gold ores,siliceous mylonite and quartz vein,formed at the first and second stages of mineralization respectively, can be clearly recognized in the shear zone-hosted gold deposit at Jinshan, Jiangxi.Similarity in REE and trace elements between the siliceous mylonite and the country rocks indicates that the ore metals were supplied by the surrounding strata during the first stage of mineralization.On the other hand, as indicated by fluid inclusion data,the ore-forming fluid at the second stage was of meteoric origin and the precipitation of gold was caused by phase separation.
