Since the decision of the State Council in 1985 on expanding the export of electromechanical products, China’s exports of electrome-chanical products has freed itself from long fluctuation and realized fast growth. A...Since the decision of the State Council in 1985 on expanding the export of electromechanical products, China’s exports of electrome-chanical products has freed itself from long fluctuation and realized fast growth. According to statistics from the Customs Office, China’s exports of electro-mechanical products in 1995 reached US$43.86 billion, increasing 25 times in 10 years, and becoming China’s first pillar products for export. While achieving fast growth in exports, product mix has also seen sig-展开更多
This experiment was conducted to study the effect of molasses on the fermentation characteristics of mixed silage ensiled rice straw and vegetable by-products with alfalfa.Mixture（202 g kg^-1 dry matter（DM））consis...This experiment was conducted to study the effect of molasses on the fermentation characteristics of mixed silage ensiled rice straw and vegetable by-products with alfalfa.Mixture（202 g kg^-1 dry matter（DM））consisting of rice straw,broccoli residue and alfalfa at the ratio of 5：4：1 was ensiled with three experimental treatments：（1）no additives（control）;（2）molasses at 2.5%（M1）;（3）molasses at 5%（M2）on a fresh matter basis of mixture,respectively.All treatments were packed into laboratory-scale silos,and three silos per treatment were sampled on days 1,3,5,14 and 30.The result showed that the p H value of all mixed silages decreased gradually with the time of ensiling except for the control silage,in which a significant increase（P〈0.05）on day 30 occurred.The lactic acid content increased gradually with the time of ensiling and reached the highest value on day 14,and a marked decrease（P〈0.05）was found in the control silage on day 30.The changes of acetic acid content showed similar pattern with lactic acid content.A trace amount of propionic and butyric acid contents were found in the three mixed silages during the fermentation period.Comparing to the control,M1 and M2 treatments improved the fermentation quality of mixed silages as indicated by higher（P〈0.05）lactic acid contents and lower（P〈0.05）p H and ammonia-N contents.The Flieg points also showed that M1 and M2 silages were well preserved,whereas the control silage had a bad quality.Overall,the findings of this study suggested that adding molasses could improve fermentation quality of mixed silage,and M1 was more suitable for practical application.展开更多
Molasses wastewater was evaluated as substrate for biohydrogen production by anaerobic fermentation in a novel continuous mixed attached growth reactor ( CMAGR ) with aeration pretreated sludge attached onto granular ...Molasses wastewater was evaluated as substrate for biohydrogen production by anaerobic fermentation in a novel continuous mixed attached growth reactor ( CMAGR ) with aeration pretreated sludge attached onto granular activated carbon under continuous flow condition.It was indicated that the CMAGR system was operated at the conditions of influent COD of 2000～6000mg / L , hydraulic retention time ( HRT ) of 6hand temperature of 35 ℃ , when the pH value and oxidation-reduction potential ( ORP ) ranged from 4.16and-434 mV respectively , stable ethanol-type fermentation was formed with the sum of ethanol and acetate concentration ratio of 89.3%to the total liquid products after 40days operation.The H 2 content in biogas and chemical oxygen demand ( COD ) removal were estimated to be 46.6% and 13% , respectively.It was also investigated that the effects of organic loading rates ( OLRs ) on CMAGR hydrogen production system.It was found that hydrogen production yield increased from 3.72 mmol / hL to 12.51 mmol / hL as OLRs increased from 8 kg / m 3 d to 32 kg / m 3 d.The maximum hydrogen production rate of 12.51mmol / hL at a OLR of 32kg / m 3 d and the maximum hydrogen yield by substrate consumed was 130.57 mmol / mol happened at OLR of 16 kg / m 3 d.Greater pHs appeared to be favour to butyrate production and the maximum of 0.51mol / mol was obtained at pH of 4.14.However , ethanol / acetate ratio was greater than 1.1at pH fluctuated between 3.4 - 3.6and 4.1 - 4.4which indicated that these pHs were favour to ethanol type fermentation.Therefore , the continuous mixed attached growth reactor ( CMAGR ) could be a promising attached growth system for biohydrogen fermentation.展开更多
Forty multiparous Holstein cows in early lactation (66 ± 19 days) were assigned to one of four treatments that consisted in different ratios of total mixed rations (TMR) and pasture at 100% TMR (T0), 75:25 (T1) 5...Forty multiparous Holstein cows in early lactation (66 ± 19 days) were assigned to one of four treatments that consisted in different ratios of total mixed rations (TMR) and pasture at 100% TMR (T0), 75:25 (T1) 50:50 (T2) and 25:75 (T3) over 9 weeks in autumn-winter. Measures of rumen parameters and digestion were performed on 4 additional Holstein cows in late lactation (287 days postpartum) fitted with permanent ruminal fistulae and producing 22.6 (±5.4) kg milk in a 4 × 4 Latin Square design. In T1 to T3 cows were taken to the grazing plot once they finished the pre-planned TMR intake and pasture was offered at 2 times the expected forage DM intake. Milk was analyzed for chemical composition, milk fatty acid (FA) profile and antioxidant compounds. The cows were individually weighed and body condition score (BCS) was determined. After the morning milking, blood samples were taken every 2 weeks and plasma was analyzed for glucose, urea, non-esterified fatty acids (NEFA), insulin, growth hormone (GH) and insulin-like growth factor (IGF-I). Herbage mass in pre grazing strips of pasture averaged 2540 ± 343 kg DM/ha. As TMR intake increased, production variables increased linearly excepting milk fat (3.88 g/100g) and milk protein (3.43 g/100g) contents that were not affected. Milk yield (kg/cow/d) resulted maximal in T0 (34.2) and linearly decreased (p 3-N concentration resulted higher in treatments with higher proportion of pasture. Kinetic parameters of DM and NDF digestion from pasture or corn silage were not affected. Milk FA profile and milk antioxidant quality showed unfavorably changes as TMR increased by a decrease in rumenic and linolenic acids and content of antioxidant vitamins, without effect on the atherogenicity index. Results suggested a depressing effect of the pasture on total DM and energy intake probably explained by qualitative deficiencies chemical composition of the forage and/or factors that affect animal behavior that may induce losses in body condition of high yielding dairy cows.展开更多
Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to thos...Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to those from a shop with one-piece transfer lots. Next, a mathematical programming model for minimizing lead time in the mixed-model job shop is presented, in which one-piece transfer lots are used. Key factors affecting lead time are found by analyzing the sum of the longest setup time of individual items among the shared processes （SLST） and the longest processing time of individual items among processes （LPT）. And lead time can be minimized by cutting down the SLST and LPT. Reduction of the SLST is described as a traveling salesman problem （TSP）, and the minimum of the SLST is solved through job shop scheduling. Removing the bottleneck and leveling the production line optimize the LPT. If the number of items produced is small, the routings are relatively short, and items and facilities are changed infrequently, the optimal schedule will remain valid. Finally a brief example serves to illustrate the method.展开更多
The objective of the research discussed in this paper has been to find an optimal schedule on mixed mass production lines of two and three machines. Johnson's rule on flow shops is generalized to mixed mass produ...The objective of the research discussed in this paper has been to find an optimal schedule on mixed mass production lines of two and three machines. Johnson's rule on flow shops is generalized to mixed mass production lines. Scheduling methods on three-machine lines are proposed for six special kinds of data of processing times of jobs. The scheduling method on two-machine lines is also proposed.展开更多
[Objective] The paper was to investigate effects of pelleted total mixed ration on production performance and serum biochemical index of growing Hainan black goats.[Method] Twenty-four growing Hainan black goats with ...[Objective] The paper was to investigate effects of pelleted total mixed ration on production performance and serum biochemical index of growing Hainan black goats.[Method] Twenty-four growing Hainan black goats with the same genetic backgrounds and similar initial weight of(10.05±0.049) kg were randomly assigned into two treatments, and supplied with Juncao + concentrate(control group), pelleted total mixed ration(experimental group), respectively. The trial lasted 50 d.[Result] The final weight, daily gain and feed intake of experimental group were significantly higher than those of control group(P<0.05), but the feed/gain ratio of experimental group was markedly lower than that of control group(P<0.05). Compared with the control group, the gross profit of experimental group significantly increased( P <0.05).[Conclusion] Pelleted total mixed ration led to better production performance of growing Hainan black goat.展开更多
As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simul...As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously：minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard（NP-hard）,a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals＇ fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.展开更多
The aim of the study was to determine the effect of supplementing an oat winter pasture with a total mixed ration (TMR) on lactation performance of dairy cows. Nine multiparous Holstein cows were used in a 3 × 3 ...The aim of the study was to determine the effect of supplementing an oat winter pasture with a total mixed ration (TMR) on lactation performance of dairy cows. Nine multiparous Holstein cows were used in a 3 × 3 Latin square design with three TMR: pasture ratios at 79:21 (T1), 58:42 (T2) and 33:67 (T3) on a dry matter (DM) basis. The response to the 100% TMR diet (TMR-100) was tested using an extra period of 14 days inmediately after finishing the Latin square schedule using the nine experimental cows. Total DM intake resulted higher in TMR-100 (28.2 (kg/cow·day) and decreased by 2.64 kg/cow·day in T1, 5.02 kg in T2 and 6.68 kg in T3. Yields of milk (31.2 kg/cow·day) and fat corrected milk (26.8 kg/cow·day) was similar between T1, T2 and T3. Milk yield resulted higher in TMR-100 (32.1 kg/cow·day) compared to T2 (30.7 kg/cow·day). Milk fat concentration (g/100 g) was higher in T2 (3.13) and T3 (3.20) compared to T1 (2.96) and TMR-100 (2.85) and milk fat yield did not differ. Milk protein content resulted higher in TMR-100 and T2 averaging 3.37 g/100 g compared to T1 (3.32 g/100 g). The lowest milk protein concentration was observed in T3 (3.29 g/100 g) that resulted only different to T2. Milk protein yield did not differ between T1, T2 and T3 averaging 1.03 kg/cow·day. A lower protein yield was detected in T2 (1.03) and T3 (1.00) when compared to TMR-100 (1.07). Efficiency of milk production (kg milk/kg DM intake) resulted higher in T3 (1.42) compared to T1 (1.25). Treatments that included pasture yielded a higher efficiency of milk production when compared to TMR-100 (1.13). Plasma urea concentration resulted lower in TMR-100 (33.8 mg/dl) with no significant differences for this parameter between the other treatments. Glucose plasma levels did not differ between T1, T2 and T3 but plasma non-esterified fatty acids (NEFA) gradually increased as the proportion of pasture was enhanced according to the lower energy intake. Plasma insulin levels were higher in TMR-100 and T2 whereas concentration of somatomedins (IGF-1) remained unaffected. Grouth hormone (GH) levels and the GH/insulin ratio were highly variable and not affected by treatments. Concentration of vaccenic and conjugated linoleic acids gradually increased with the inclusion of pasture in the diet. Supplementing a winter oat pasture with TMR may be a suitable strategy to maintain milk production with a high conversion efficiency but part of the produced milk could be sustained at the expense of endogenous energy mobilization. The conditions of replacing pasture for TMR in high yielding dairy cows should be defined taking into account the depressing effect of pasture on total DM and energy intake when fresh forage is included in high proportion in the diet.展开更多
Concrete properties such as unit weight and compressive strength are highly dependable on the properties of aggregate. Current research aims to study the effect of aggregate properties on concrete considering the reso...Concrete properties such as unit weight and compressive strength are highly dependable on the properties of aggregate. Current research aims to study the effect of aggregate properties on concrete considering the resource of aggregate. The properties of aggregate and fine sand were studied (specific gravity, density, absorption, and abrasion). Also, the properties of concrete were studied (density, unit weight, and compressive strength). Samples of coarse and medium aggregates, and fine sand were collected from different areas in Jordan (Ajloun, Amman, Aqaba, Irbid, Jerash, Karak, Ma’an, Madaba, Salt, Zarqa, and Tafila) to be tested and used in concrete mix. Aggregate from South of Jordan has higher values in specific gravity and bulk density (Aqaba, Ma’an, and Karak aggregates). Also, the same aggregate samples have lower values in absorption and abrasion (Ma’an, Aqaba, Karak, and Tafila). For the properties of concrete that include density, unit weight, and compressive strength, all samples have achieved the design properties and strength in the current study. For density and unit weight, samples from South of Jordan have higher values (Ma’an and Aqaba). And for compressive strength, Ma’an, Irbid and Amman concrete samples have the highest values at 7-day, while the 28-day compressive strength comes highest for Zarqa, Ma’an, Irbid and Amman. From the results of the current study, the compressive strength at 7-day and 28-day is related to the density of coarse and medium aggregate, abrasion, and absorption. The higher the density, the higher the compressive strength. And the lower abrasion and absorption, the higher the compressive strength of concrete. Current research will be useful in selecting the source of aggregate to produce a considerable concrete strength.展开更多
[Objective] The paper to investigate the effects of pelleted total mixed ration of different particle size on production performance and serum biochemical index of fattening Hainan black goats.[Method] Thirty-six fatt...[Objective] The paper to investigate the effects of pelleted total mixed ration of different particle size on production performance and serum biochemical index of fattening Hainan black goats.[Method] Thirty-six fattening Hainan black goats with the same genetic backgrounds and similar initial weight of(19.02±0.22) kg were randomly divided into three treatments. Goats were fed with Juncao+concentrate(control group), pel-leted total mixed ration I(particle size 6 mm, experimental group I) and II(particle size 5 mm, experimental group II), respectively. The trial lasted 45 d.[Result](1) The final weight and daily gain of experimental group II were significantly higher than those of control group( P<0.05), and the daily gain of experimental group II was also higher than that of experimental group I(P<0.05);the feed intake of experimental group II was markedly higher than that of control group(P<0.05), but was significantly lower than that of experimental group I(P<0.05). The feed/gain ratio of experimental group II was significantly lower than those of control group and experimental group I(P<0.05).(2) The feed gain cost of experimental group II was markedly lower than that of control group(P<0.05), but the gross profit was significantly higher than those of control group and experimental group I(P<0.05).(3) Compared with the control group, the serum total protein content of experimental group II increased markedly( P<0.05) while the urea nitrogen level decreased(P>0.05).[Conclusion] The pelleted total mixed ration with the particle size of 5 mm obtained better fattening ef-fect, and obviously improved the serum total protein level.展开更多
Optimizing operational parameters for syngas production of Texaco coal-water slurry gasifier studied in this paper is a complicated nonlinear constrained problem concerning 3 BP(Error Back Propagation) neural networks...Optimizing operational parameters for syngas production of Texaco coal-water slurry gasifier studied in this paper is a complicated nonlinear constrained problem concerning 3 BP(Error Back Propagation) neural networks. To solve this model, a new 3-layer cultural evolving algorithm framework which has a population space, a medium space and a belief space is firstly conceived. Standard differential evolution algorithm(DE), genetic algorithm(GA), and particle swarm optimization algorithm(PSO) are embedded in this framework to build 3-layer mixed cultural DE/GA/PSO(3LM-CDE, 3LM-CGA, and 3LM-CPSO) algorithms. The accuracy and efficiency of the proposed hybrid algorithms are firstly tested in 20 benchmark nonlinear constrained functions. Then, the operational optimization model for syngas production in a Texaco coal-water slurry gasifier of a real-world chemical plant is solved effectively. The simulation results are encouraging that the 3-layer cultural algorithm evolving framework suggests ways in which the performance of DE, GA, PSO and other population-based evolutionary algorithms(EAs) can be improved,and the optimal operational parameters based on 3LM-CDE algorithm of the syngas production in the Texaco coalwater slurry gasifier shows outstanding computing results than actual industry use and other algorithms.展开更多
The recently experienced hype concerning the so-called “4<sup>th</sup> Industrial Revolution” of production systems has prompted several papers of various subtopics regarding Cyber-Phdysical Production S...The recently experienced hype concerning the so-called “4<sup>th</sup> Industrial Revolution” of production systems has prompted several papers of various subtopics regarding Cyber-Phdysical Production Systems (CPPS). However, important aspects such as the modelling of CPPS to understand the theory regarding the performance of highly non-ergodic and non-deterministic flexible manufacturing systems in terms of Exit Rate (ER), Manufacturing Lead Time (MLT), and On-Time Delivery (OTD) have not yet been examined systematically and even less modeled analytically. To develop the topic, in this paper, the prerequisites for modelling such systems are defined in order to be able to derive an explicit and dedicated production mathematics-based understanding of CPPS and its dynamics: switching from explorative simulation to rational modelling of the manufacturing “physics” led to an own and specific manufacturing theory. The findings have led to enouncing, among others, the Theorem of Non-Ergodicity as well as the Batch Cycle Time Deviation Function giving important insights to model digital twin-based CPPS for complying with the mandatory OTD.展开更多
Ghanaian society and the world at large have shown a strong interest in the use of lampshades with evidence from hotels and residential dwellings. Table-top Lampshades direct the rays of light to make sight easier for...Ghanaian society and the world at large have shown a strong interest in the use of lampshades with evidence from hotels and residential dwellings. Table-top Lampshades direct the rays of light to make sight easier for reading whereas bedside lampshades provide romantic illumination and beautification in bedrooms. This art studio research sought to examine lampshades on Ghanaian market;their qualities, significance, shortcomings, etc. as the basis to design and produce inventive lampshades for private and public use. The study was conducted at an art studio condition using Practice-based research design method. Findings show that lampshades serve functional and aesthetic significance in public dwellings and the hospitality industry. Nonetheless, available lampshades on the Ghanaian market lack the multifunctional property as well as a local touch which arguably makes them misfit in Ghanaian context in terms of usage. The innovative results of the studio-produced lampshades revealed the possibility of creating symbolic and multifunctional lampshades which suit specific space and tradition. The study recommends the adoption of such innovative design approach in the creation of interior design and decoration artefacts for residential and public edifices.展开更多
Fused materials from ZrO2 stabilized by CaO or MgO, or the combined additive consisting of CaO and MgO are made. With using chemical, petrographic, X-ray phase and electron microscopic researches the main characterist...Fused materials from ZrO2 stabilized by CaO or MgO, or the combined additive consisting of CaO and MgO are made. With using chemical, petrographic, X-ray phase and electron microscopic researches the main characteristics of these materials are determined. It is shown that, the materials of all compositions have low water absorption; they are characterized by equal struc-ture. The materials stabilized by the combined additive consisting of CaO and MgO are presented by generally the cubic phase and a small amount of tetragonal and monoclinic ZrO2 phases. Depending on CaO： MgO ratio in the materials the tetragonal ZrO2 phase settles down in a cubic matrix in the form of separate grains, and sites of net like structure in the form of a ＂woven＂ interlacing （2.9% of CaO and 2. 6% of MgO ）. An influence of the above mentioned fused stabilized ZrO2 materials and quantity of monoclinic zirconia, on the forming of zirconia mix on a phosphate bond and properties of＂ .fired samples is studied. The samples from mix based on ZrO2 stabilized by the combined additive consisting of 2.9% CaO and 2.6% MgO with 20% of monoclinic Zr02 are characterized by the highest properties： after .firing at 1 580 ~C open porosity of 14. 3% - 14. 8%, apparent density of 4. 67 -4. 69 g · cm^-5, cold crushing strength of 62 - 68 MPa, thermal shock resistance （ 1 300℃←→air） of 15 thermal cycles, linear growth of 0. 2%. The manufacturing technology of powders mix-ture for ramming mix based on the new fused material .from ZrO2 stabilized by the combined additive is developed and its production is mastered. From this mixture the large-size, shaped products on the phosphate bond are made at one carbon black production plant, which are installed in the combustion chamber of the carbon black production reactor.展开更多
文摘Since the decision of the State Council in 1985 on expanding the export of electromechanical products, China’s exports of electrome-chanical products has freed itself from long fluctuation and realized fast growth. According to statistics from the Customs Office, China’s exports of electro-mechanical products in 1995 reached US$43.86 billion, increasing 25 times in 10 years, and becoming China’s first pillar products for export. While achieving fast growth in exports, product mix has also seen sig-
基金supported by the project of Jiangsu Independent Innovation, China (CX(15)1003-3)the Key Technologies R&D Program of China during the 13th Five Year Plan period (2016YFC0502005)the special project of grass of Tibetan Autonomous Region for the “13th FiveYear” Plan, China
文摘This experiment was conducted to study the effect of molasses on the fermentation characteristics of mixed silage ensiled rice straw and vegetable by-products with alfalfa.Mixture（202 g kg^-1 dry matter（DM））consisting of rice straw,broccoli residue and alfalfa at the ratio of 5：4：1 was ensiled with three experimental treatments：（1）no additives（control）;（2）molasses at 2.5%（M1）;（3）molasses at 5%（M2）on a fresh matter basis of mixture,respectively.All treatments were packed into laboratory-scale silos,and three silos per treatment were sampled on days 1,3,5,14 and 30.The result showed that the p H value of all mixed silages decreased gradually with the time of ensiling except for the control silage,in which a significant increase（P〈0.05）on day 30 occurred.The lactic acid content increased gradually with the time of ensiling and reached the highest value on day 14,and a marked decrease（P〈0.05）was found in the control silage on day 30.The changes of acetic acid content showed similar pattern with lactic acid content.A trace amount of propionic and butyric acid contents were found in the three mixed silages during the fermentation period.Comparing to the control,M1 and M2 treatments improved the fermentation quality of mixed silages as indicated by higher（P〈0.05）lactic acid contents and lower（P〈0.05）p H and ammonia-N contents.The Flieg points also showed that M1 and M2 silages were well preserved,whereas the control silage had a bad quality.Overall,the findings of this study suggested that adding molasses could improve fermentation quality of mixed silage,and M1 was more suitable for practical application.
基金support from the National Hi-Tech R&D Program(863 Program)Ministry of Science & Technology,China(2006AA05Z109)+2 种基金Shanghai Science and Technology Bureau(071605122)Shanghai Education Committee(07ZZ156)GRAP09,Northeast Forestry University are gratefully acknowledged
文摘Molasses wastewater was evaluated as substrate for biohydrogen production by anaerobic fermentation in a novel continuous mixed attached growth reactor ( CMAGR ) with aeration pretreated sludge attached onto granular activated carbon under continuous flow condition.It was indicated that the CMAGR system was operated at the conditions of influent COD of 2000～6000mg / L , hydraulic retention time ( HRT ) of 6hand temperature of 35 ℃ , when the pH value and oxidation-reduction potential ( ORP ) ranged from 4.16and-434 mV respectively , stable ethanol-type fermentation was formed with the sum of ethanol and acetate concentration ratio of 89.3%to the total liquid products after 40days operation.The H 2 content in biogas and chemical oxygen demand ( COD ) removal were estimated to be 46.6% and 13% , respectively.It was also investigated that the effects of organic loading rates ( OLRs ) on CMAGR hydrogen production system.It was found that hydrogen production yield increased from 3.72 mmol / hL to 12.51 mmol / hL as OLRs increased from 8 kg / m 3 d to 32 kg / m 3 d.The maximum hydrogen production rate of 12.51mmol / hL at a OLR of 32kg / m 3 d and the maximum hydrogen yield by substrate consumed was 130.57 mmol / mol happened at OLR of 16 kg / m 3 d.Greater pHs appeared to be favour to butyrate production and the maximum of 0.51mol / mol was obtained at pH of 4.14.However , ethanol / acetate ratio was greater than 1.1at pH fluctuated between 3.4 - 3.6and 4.1 - 4.4which indicated that these pHs were favour to ethanol type fermentation.Therefore , the continuous mixed attached growth reactor ( CMAGR ) could be a promising attached growth system for biohydrogen fermentation.
文摘Forty multiparous Holstein cows in early lactation (66 ± 19 days) were assigned to one of four treatments that consisted in different ratios of total mixed rations (TMR) and pasture at 100% TMR (T0), 75:25 (T1) 50:50 (T2) and 25:75 (T3) over 9 weeks in autumn-winter. Measures of rumen parameters and digestion were performed on 4 additional Holstein cows in late lactation (287 days postpartum) fitted with permanent ruminal fistulae and producing 22.6 (±5.4) kg milk in a 4 × 4 Latin Square design. In T1 to T3 cows were taken to the grazing plot once they finished the pre-planned TMR intake and pasture was offered at 2 times the expected forage DM intake. Milk was analyzed for chemical composition, milk fatty acid (FA) profile and antioxidant compounds. The cows were individually weighed and body condition score (BCS) was determined. After the morning milking, blood samples were taken every 2 weeks and plasma was analyzed for glucose, urea, non-esterified fatty acids (NEFA), insulin, growth hormone (GH) and insulin-like growth factor (IGF-I). Herbage mass in pre grazing strips of pasture averaged 2540 ± 343 kg DM/ha. As TMR intake increased, production variables increased linearly excepting milk fat (3.88 g/100g) and milk protein (3.43 g/100g) contents that were not affected. Milk yield (kg/cow/d) resulted maximal in T0 (34.2) and linearly decreased (p 3-N concentration resulted higher in treatments with higher proportion of pasture. Kinetic parameters of DM and NDF digestion from pasture or corn silage were not affected. Milk FA profile and milk antioxidant quality showed unfavorably changes as TMR increased by a decrease in rumenic and linolenic acids and content of antioxidant vitamins, without effect on the atherogenicity index. Results suggested a depressing effect of the pasture on total DM and energy intake probably explained by qualitative deficiencies chemical composition of the forage and/or factors that affect animal behavior that may induce losses in body condition of high yielding dairy cows.
基金This project is supported by National Natural Science Foundation of China (No.70372062, No.70572044)Program for New Century Excellent Talents in University of China (No.NCET-04-0240).
文摘Firstly an overview of the potential impact on work-in-process （WIP） and lead time is provided when transfer lot sizes are undifferentiated from processing lot sizes. Simple performance examples are compared to those from a shop with one-piece transfer lots. Next, a mathematical programming model for minimizing lead time in the mixed-model job shop is presented, in which one-piece transfer lots are used. Key factors affecting lead time are found by analyzing the sum of the longest setup time of individual items among the shared processes （SLST） and the longest processing time of individual items among processes （LPT）. And lead time can be minimized by cutting down the SLST and LPT. Reduction of the SLST is described as a traveling salesman problem （TSP）, and the minimum of the SLST is solved through job shop scheduling. Removing the bottleneck and leveling the production line optimize the LPT. If the number of items produced is small, the routings are relatively short, and items and facilities are changed infrequently, the optimal schedule will remain valid. Finally a brief example serves to illustrate the method.
文摘The objective of the research discussed in this paper has been to find an optimal schedule on mixed mass production lines of two and three machines. Johnson's rule on flow shops is generalized to mixed mass production lines. Scheduling methods on three-machine lines are proposed for six special kinds of data of processing times of jobs. The scheduling method on two-machine lines is also proposed.
基金Supported by Major Science and Technology Program of Hainan Province(ZDKJ2016017-01,ZDKJ2016017-03)
文摘[Objective] The paper was to investigate effects of pelleted total mixed ration on production performance and serum biochemical index of growing Hainan black goats.[Method] Twenty-four growing Hainan black goats with the same genetic backgrounds and similar initial weight of(10.05±0.049) kg were randomly assigned into two treatments, and supplied with Juncao + concentrate(control group), pelleted total mixed ration(experimental group), respectively. The trial lasted 50 d.[Result] The final weight, daily gain and feed intake of experimental group were significantly higher than those of control group(P<0.05), but the feed/gain ratio of experimental group was markedly lower than that of control group(P<0.05). Compared with the control group, the gross profit of experimental group significantly increased( P <0.05).[Conclusion] Pelleted total mixed ration led to better production performance of growing Hainan black goat.
基金supported by National Natural Science Foundation of China (Grant No.50875101)National Hi-tech Research and Development Program of China (863 Program,Grant No.2007AA04Z186)
文摘As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously：minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard（NP-hard）,a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals＇ fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.
文摘The aim of the study was to determine the effect of supplementing an oat winter pasture with a total mixed ration (TMR) on lactation performance of dairy cows. Nine multiparous Holstein cows were used in a 3 × 3 Latin square design with three TMR: pasture ratios at 79:21 (T1), 58:42 (T2) and 33:67 (T3) on a dry matter (DM) basis. The response to the 100% TMR diet (TMR-100) was tested using an extra period of 14 days inmediately after finishing the Latin square schedule using the nine experimental cows. Total DM intake resulted higher in TMR-100 (28.2 (kg/cow·day) and decreased by 2.64 kg/cow·day in T1, 5.02 kg in T2 and 6.68 kg in T3. Yields of milk (31.2 kg/cow·day) and fat corrected milk (26.8 kg/cow·day) was similar between T1, T2 and T3. Milk yield resulted higher in TMR-100 (32.1 kg/cow·day) compared to T2 (30.7 kg/cow·day). Milk fat concentration (g/100 g) was higher in T2 (3.13) and T3 (3.20) compared to T1 (2.96) and TMR-100 (2.85) and milk fat yield did not differ. Milk protein content resulted higher in TMR-100 and T2 averaging 3.37 g/100 g compared to T1 (3.32 g/100 g). The lowest milk protein concentration was observed in T3 (3.29 g/100 g) that resulted only different to T2. Milk protein yield did not differ between T1, T2 and T3 averaging 1.03 kg/cow·day. A lower protein yield was detected in T2 (1.03) and T3 (1.00) when compared to TMR-100 (1.07). Efficiency of milk production (kg milk/kg DM intake) resulted higher in T3 (1.42) compared to T1 (1.25). Treatments that included pasture yielded a higher efficiency of milk production when compared to TMR-100 (1.13). Plasma urea concentration resulted lower in TMR-100 (33.8 mg/dl) with no significant differences for this parameter between the other treatments. Glucose plasma levels did not differ between T1, T2 and T3 but plasma non-esterified fatty acids (NEFA) gradually increased as the proportion of pasture was enhanced according to the lower energy intake. Plasma insulin levels were higher in TMR-100 and T2 whereas concentration of somatomedins (IGF-1) remained unaffected. Grouth hormone (GH) levels and the GH/insulin ratio were highly variable and not affected by treatments. Concentration of vaccenic and conjugated linoleic acids gradually increased with the inclusion of pasture in the diet. Supplementing a winter oat pasture with TMR may be a suitable strategy to maintain milk production with a high conversion efficiency but part of the produced milk could be sustained at the expense of endogenous energy mobilization. The conditions of replacing pasture for TMR in high yielding dairy cows should be defined taking into account the depressing effect of pasture on total DM and energy intake when fresh forage is included in high proportion in the diet.
文摘Concrete properties such as unit weight and compressive strength are highly dependable on the properties of aggregate. Current research aims to study the effect of aggregate properties on concrete considering the resource of aggregate. The properties of aggregate and fine sand were studied (specific gravity, density, absorption, and abrasion). Also, the properties of concrete were studied (density, unit weight, and compressive strength). Samples of coarse and medium aggregates, and fine sand were collected from different areas in Jordan (Ajloun, Amman, Aqaba, Irbid, Jerash, Karak, Ma’an, Madaba, Salt, Zarqa, and Tafila) to be tested and used in concrete mix. Aggregate from South of Jordan has higher values in specific gravity and bulk density (Aqaba, Ma’an, and Karak aggregates). Also, the same aggregate samples have lower values in absorption and abrasion (Ma’an, Aqaba, Karak, and Tafila). For the properties of concrete that include density, unit weight, and compressive strength, all samples have achieved the design properties and strength in the current study. For density and unit weight, samples from South of Jordan have higher values (Ma’an and Aqaba). And for compressive strength, Ma’an, Irbid and Amman concrete samples have the highest values at 7-day, while the 28-day compressive strength comes highest for Zarqa, Ma’an, Irbid and Amman. From the results of the current study, the compressive strength at 7-day and 28-day is related to the density of coarse and medium aggregate, abrasion, and absorption. The higher the density, the higher the compressive strength. And the lower abrasion and absorption, the higher the compressive strength of concrete. Current research will be useful in selecting the source of aggregate to produce a considerable concrete strength.
基金Supported by Major Science and Technology Program of Hainan Province(ZDKJ2016017-01,ZDKJ2016017-03)
文摘[Objective] The paper to investigate the effects of pelleted total mixed ration of different particle size on production performance and serum biochemical index of fattening Hainan black goats.[Method] Thirty-six fattening Hainan black goats with the same genetic backgrounds and similar initial weight of(19.02±0.22) kg were randomly divided into three treatments. Goats were fed with Juncao+concentrate(control group), pel-leted total mixed ration I(particle size 6 mm, experimental group I) and II(particle size 5 mm, experimental group II), respectively. The trial lasted 45 d.[Result](1) The final weight and daily gain of experimental group II were significantly higher than those of control group( P<0.05), and the daily gain of experimental group II was also higher than that of experimental group I(P<0.05);the feed intake of experimental group II was markedly higher than that of control group(P<0.05), but was significantly lower than that of experimental group I(P<0.05). The feed/gain ratio of experimental group II was significantly lower than those of control group and experimental group I(P<0.05).(2) The feed gain cost of experimental group II was markedly lower than that of control group(P<0.05), but the gross profit was significantly higher than those of control group and experimental group I(P<0.05).(3) Compared with the control group, the serum total protein content of experimental group II increased markedly( P<0.05) while the urea nitrogen level decreased(P>0.05).[Conclusion] The pelleted total mixed ration with the particle size of 5 mm obtained better fattening ef-fect, and obviously improved the serum total protein level.
基金Supported by the National Natural Science Foundation of China(61174040,U1162110,21206174)Shanghai Commission of Nature Science(12ZR1408100)
文摘Optimizing operational parameters for syngas production of Texaco coal-water slurry gasifier studied in this paper is a complicated nonlinear constrained problem concerning 3 BP(Error Back Propagation) neural networks. To solve this model, a new 3-layer cultural evolving algorithm framework which has a population space, a medium space and a belief space is firstly conceived. Standard differential evolution algorithm(DE), genetic algorithm(GA), and particle swarm optimization algorithm(PSO) are embedded in this framework to build 3-layer mixed cultural DE/GA/PSO(3LM-CDE, 3LM-CGA, and 3LM-CPSO) algorithms. The accuracy and efficiency of the proposed hybrid algorithms are firstly tested in 20 benchmark nonlinear constrained functions. Then, the operational optimization model for syngas production in a Texaco coal-water slurry gasifier of a real-world chemical plant is solved effectively. The simulation results are encouraging that the 3-layer cultural algorithm evolving framework suggests ways in which the performance of DE, GA, PSO and other population-based evolutionary algorithms(EAs) can be improved,and the optimal operational parameters based on 3LM-CDE algorithm of the syngas production in the Texaco coalwater slurry gasifier shows outstanding computing results than actual industry use and other algorithms.
文摘The recently experienced hype concerning the so-called “4<sup>th</sup> Industrial Revolution” of production systems has prompted several papers of various subtopics regarding Cyber-Phdysical Production Systems (CPPS). However, important aspects such as the modelling of CPPS to understand the theory regarding the performance of highly non-ergodic and non-deterministic flexible manufacturing systems in terms of Exit Rate (ER), Manufacturing Lead Time (MLT), and On-Time Delivery (OTD) have not yet been examined systematically and even less modeled analytically. To develop the topic, in this paper, the prerequisites for modelling such systems are defined in order to be able to derive an explicit and dedicated production mathematics-based understanding of CPPS and its dynamics: switching from explorative simulation to rational modelling of the manufacturing “physics” led to an own and specific manufacturing theory. The findings have led to enouncing, among others, the Theorem of Non-Ergodicity as well as the Batch Cycle Time Deviation Function giving important insights to model digital twin-based CPPS for complying with the mandatory OTD.
文摘Ghanaian society and the world at large have shown a strong interest in the use of lampshades with evidence from hotels and residential dwellings. Table-top Lampshades direct the rays of light to make sight easier for reading whereas bedside lampshades provide romantic illumination and beautification in bedrooms. This art studio research sought to examine lampshades on Ghanaian market;their qualities, significance, shortcomings, etc. as the basis to design and produce inventive lampshades for private and public use. The study was conducted at an art studio condition using Practice-based research design method. Findings show that lampshades serve functional and aesthetic significance in public dwellings and the hospitality industry. Nonetheless, available lampshades on the Ghanaian market lack the multifunctional property as well as a local touch which arguably makes them misfit in Ghanaian context in terms of usage. The innovative results of the studio-produced lampshades revealed the possibility of creating symbolic and multifunctional lampshades which suit specific space and tradition. The study recommends the adoption of such innovative design approach in the creation of interior design and decoration artefacts for residential and public edifices.
文摘Fused materials from ZrO2 stabilized by CaO or MgO, or the combined additive consisting of CaO and MgO are made. With using chemical, petrographic, X-ray phase and electron microscopic researches the main characteristics of these materials are determined. It is shown that, the materials of all compositions have low water absorption; they are characterized by equal struc-ture. The materials stabilized by the combined additive consisting of CaO and MgO are presented by generally the cubic phase and a small amount of tetragonal and monoclinic ZrO2 phases. Depending on CaO： MgO ratio in the materials the tetragonal ZrO2 phase settles down in a cubic matrix in the form of separate grains, and sites of net like structure in the form of a ＂woven＂ interlacing （2.9% of CaO and 2. 6% of MgO ）. An influence of the above mentioned fused stabilized ZrO2 materials and quantity of monoclinic zirconia, on the forming of zirconia mix on a phosphate bond and properties of＂ .fired samples is studied. The samples from mix based on ZrO2 stabilized by the combined additive consisting of 2.9% CaO and 2.6% MgO with 20% of monoclinic Zr02 are characterized by the highest properties： after .firing at 1 580 ~C open porosity of 14. 3% - 14. 8%, apparent density of 4. 67 -4. 69 g · cm^-5, cold crushing strength of 62 - 68 MPa, thermal shock resistance （ 1 300℃←→air） of 15 thermal cycles, linear growth of 0. 2%. The manufacturing technology of powders mix-ture for ramming mix based on the new fused material .from ZrO2 stabilized by the combined additive is developed and its production is mastered. From this mixture the large-size, shaped products on the phosphate bond are made at one carbon black production plant, which are installed in the combustion chamber of the carbon black production reactor.
