The effects of Ca-based additives on roasting properties of low-grade molybdenum concentrate were studied. The resultsshow that calcium-based additives can react with molybdenum concentrate to form CaSO4 and CaMoO4. T...The effects of Ca-based additives on roasting properties of low-grade molybdenum concentrate were studied. The resultsshow that calcium-based additives can react with molybdenum concentrate to form CaSO4 and CaMoO4. The initial oxidationtemperature of MoS2 is 450℃, while the formation of CaMoO4 and CaSO4 occurs above 500℃. The whole calcification reactionsare nearly completed between 600 and 650℃. However, raising the temperature further helps for the formation of CaMoO4 but isdisadvantageous to sulfur fixing rate and molybdenum retention rate. Calcification efficiency of Ca-based additives follows theorder： Ca（OH）2〉CaO〉CaCO3. With increasing the dosage of Ca（OH）2, the molybdenum retention rate and sulfur-fixing rate rise, butexcessive dosages would consume more acid during leaching process. The appropriate mass ratio of Ca（OH）2 to molybdenumconcentrate is 1：1. When roasted at 650 ℃ for 90 min, the molybdenum retention rate and the sulfur-fixing rate of low-grademolybdenum concentrate reach 100% and 92.92%, respectively, and the dissolution rate of molybdenum achieves 99.12% withcalcines being leached by sulphuric acid.展开更多
Na|NaCl-CaCl_(2)|Zn liquid metal battery is regarded as a promising energy storage system for power grids.Despite intensive attempts to present a real mechanism of metal electrodes reaction, those for Na||Zn LMBs are ...Na|NaCl-CaCl_(2)|Zn liquid metal battery is regarded as a promising energy storage system for power grids.Despite intensive attempts to present a real mechanism of metal electrodes reaction, those for Na||Zn LMBs are not clear yet. Herein, the anode reactions for the multiple discharge potential plateaus were deduced by means of FactSage thermochemical software, which were subsequently validated by X-ray diffraction analysis and the modeling of phase transformation in the cooling process. A pre-treatment process was proposed for the analysis of anode product composition using the atomic absorption spectrometry method, and the anode states at working temperature(560 ℃) were obtained by the Na-CaZn ternary phase for the first time. The results indicate the discharge of Na and Ca led to the formation of Ca-Zn intermetallic compounds, whilst the extraction of Ca in Ca-Zn intermetallic compounds was responsible for the multiple discharge plateaus. Moreover, it was found that the charging product was in electrochemical double liquid metal layers, which are composed of Na and Ca with dissolved Zn respectively.展开更多
The cycloaddition reactions between ketene or substituted ketenes and cyelopentadiene have been studied theoretically by means of the semiempirical AMI method.Three different substituted ketenes have been selected and...The cycloaddition reactions between ketene or substituted ketenes and cyelopentadiene have been studied theoretically by means of the semiempirical AMI method.Three different substituted ketenes have been selected and ten transition states,corresponding to different approach geometries have been located and characterized,The regioselectivity and stereoselectivity of the reactions are correctly predicted by the calculations and the reaction mechanisms are analyzed in terms of electronic and steric effects of the substitutents on the reacting ketene and cyc-lopentadiene.展开更多
The kinetics and mechanisms of H abstraction reaction between isoflurane and a CI atom have been investigated using DFT and G3（MP2） methods of theory. The geometrical structures of all species were optimized by the ...The kinetics and mechanisms of H abstraction reaction between isoflurane and a CI atom have been investigated using DFT and G3（MP2） methods of theory. The geometrical structures of all species were optimized by the wB97XD/6-311＋＋G＊＊ method. Intrinsic reaction coordinate （IRC） analysis has been carried out for the reaction channels. Thermochemistry data have been obtained by utilizing the high accurate model chemistry method G3（MP2） combined with the standard statistical thermodynamic calculations. Gibbs free energies were used for reaction channels analysis. Two channels were obtained, which correspond to P（1） and P（2）. The rate constants for the two channels over a wide temperature range of 200-2000 K were also obtained. The results show that the barriers of P（1） and P（2） reaction channels are 50.36 and 50.34 kJ/mol, respectively, predicting that it exists two competitive channels. The calculated rate constant is in good agreement with the experiment value. Additionally, the results also show that the rate constants also increase from 1.85x10^-16 to 2.16x 10^12 cm3.moleculel.s-1 from 200 to 2000 K展开更多
The reaction mechanisms of HNCS with NH（X^3∑ ） were theoretically investigated. The minimum energy paths （MEP） of the reaction were calculated by using the density functional theory（DFT） at the B3LYP/6-311 ＋ ...The reaction mechanisms of HNCS with NH（X^3∑ ） were theoretically investigated. The minimum energy paths （MEP） of the reaction were calculated by using the density functional theory（DFT） at the B3LYP/6-311 ＋ ＋ G^＊＊ level. The equilibrium structural parameters, the harmonic vibrational frequencies, the total energies, and the zeropoint energies（ZPE） of all the species were calculated. The single-point energies along the MEP were further refined at the QCISD（T）/6-311 ＋ ＋ G^＊ ＊ level. It was found that the mechanisms of the HNCS ＋ NH（X^3∑） reaction involve two channels producing the HNC ＋ HNS and the N2H2 ＋ CS products. Channel 1 plays a dominant role and the HNC ＋ HNS are the main preduets. The reaction is exothermie.展开更多
The reaction mechanisms of Ti（~3F） ＋ CH2C12→CH2=TiCl2 and Ti（~3F） ＋ CHC13→HC÷TiCl3 were investigated with Gaussian 03 program package at the B3PW91/6-311＋＋G（d,p）level.The computational results reveale...The reaction mechanisms of Ti（~3F） ＋ CH2C12→CH2=TiCl2 and Ti（~3F） ＋ CHC13→HC÷TiCl3 were investigated with Gaussian 03 program package at the B3PW91/6-311＋＋G（d,p）level.The computational results revealed that：1） Both reaction systems are initiated by Ti（~3F） atom attacking the C atom of CH2C12 and CHCl3 to activate a C-Cl bond;2） Both reaction systems were carried out via triplet reaction channels;3） CH2=TiCl2 has singlet and triplet isomers,and the singlet one is more stable;4） The HOMO of CH2=TiCl2（S） illustrates a π-bonding interaction between C and Ti;5） Only singlet HC÷TiCl3 was located,and the Mulliken atomic spin densities show that the two single electrons are mostly on the C atom.展开更多
The decarboxylation of pyrrole-2-carboxylic acid in acid solutions was elucidated by full optimization with the CPCM solvation model at the B3LYP/6-31 l＋＋G（d,p） level. Compared with the single-point energy calcula...The decarboxylation of pyrrole-2-carboxylic acid in acid solutions was elucidated by full optimization with the CPCM solvation model at the B3LYP/6-31 l＋＋G（d,p） level. Compared with the single-point energy calculation, CPCM full optimization is better to model solvent environments to gain reasonable reaction mechanisms. The π interactions play a significant role in the decarboxylation of pyrrole-2-carboxylic acid （R）. Firstly, the a hydrogen is protonated, but all of the carbonyl hydration pathways bear relatively higher energy barriers. The carbonyl group can rove over the pyrrole ring, but it does not lead to the speciation of pyrrole and protonated carbon dioxide for the latter is an energy-rich species. The decarboxylation mechanism proposed here is that, the protonated pyrrole-2-carboxylic acid （RH） decarboxylates via direct C-C bond cleavage with the aid of a water molecule to accommodate the proton on the carbonyl group.展开更多
The potential energy surface for the CH3S + NO2 reaction has been studied using the ab initio G3 (MP2) method. A variety of possible complexes and saddle points along the minimum energy reaction paths have been chara...The potential energy surface for the CH3S + NO2 reaction has been studied using the ab initio G3 (MP2) method. A variety of possible complexes and saddle points along the minimum energy reaction paths have been characterized at UMP2 (full)/6-31G(d) level. The calculations reveal dominating reaction mechanisms of the title reaction: CH3S + NO2 firstly produce intermediate CH3SONO, then break up into CH3SO + NO. The results are valuable to understand the atmospheric sulfur compounds oxidation mechanism.展开更多
Aromaticity,in general,can promote a given reaction by stabilizing a transition state or a product via a mobility ofπelectrons in a cyclic structure.Similarly,such a promotion could be also achieved by destabilizing ...Aromaticity,in general,can promote a given reaction by stabilizing a transition state or a product via a mobility ofπelectrons in a cyclic structure.Similarly,such a promotion could be also achieved by destabilizing an antiaromatic reactant.However,both aromaticity and transition states cannot be directly measured in experiment.Thus,computational chemistry has been becoming a key tool to understand the aromaticity-driven reaction mechanisms.In this review,we will analyze the relationship between aromaticity and reaction mechanism to highlight the importance of density functional theory calculations and present it according to an approach via either aromatizing a transition state/product or destabilizing a reactant by antiaromaticity.Specifically,we will start with a particularly challenging example of dinitrogen activation followed by other small-molecule activation,Csingle bondF bond activation,rearrangement,as well as metathesis reactions.In addition,antiaromaticity-promoted dihydrogen activation,CO_(2)capture,and oxygen reduction reactions will be also briefly discussed.Finally,caution must be cast as the magnitude of the aromaticity in the transition states is not particularly high in most cases.Thus,a proof of an adequate electron delocalization rather than a complete ring current is recommended to support the relatively weak aromaticity in these transition states.展开更多
Dinitrogen activation under mild conditions is important but extremely challenging due to the inert nature of the N≡N triple bond evidenced by high bond dissociation energy(945 k J/mol) and large HOMOLUMO gap(10.8 e ...Dinitrogen activation under mild conditions is important but extremely challenging due to the inert nature of the N≡N triple bond evidenced by high bond dissociation energy(945 k J/mol) and large HOMOLUMO gap(10.8 e V). In comparison with largely developed transition metal systems, the reported main group species on dinitrogen activation are rare. Here, we carry out density functional theory calculations on methyleneboranes to understand the reaction mechanisms of their dinitrogen activation. It is found that the methyleneboranes without any substituent at the boron atom performs best on dinitrogen activation, which could be contributed to its small singlet-triplet gap. In addition, strong correlations are achieved on dinitrogen activation between the singlet-triplet energy gap and the reaction energies for the formation of the end-on products as well as the side-on ones. The principal interacting orbital analysis suggests that methyleneboranes can mimic transition metals to cleave the N≡N triple bond. Our findings could be helpful for experimental chemists aiming at dinitrogen activation by main group species.展开更多
Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely use...Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the HER.In addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during HER.These spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.展开更多
Daidzein has been widely used in pharmaceuticals,nutraceuticals,cosmetics,feed additives,etc.Its preparation process and related reaction mechanism need to be further investigated.A cost-effective process for synthesi...Daidzein has been widely used in pharmaceuticals,nutraceuticals,cosmetics,feed additives,etc.Its preparation process and related reaction mechanism need to be further investigated.A cost-effective process for synthesizing daidzein was developed in this work.In this article,a two-step synthesis of daidzein(Friedel–Crafts acylation and[5+1]cyclization)was developed via the employment of trifluoromethanesulfonic acid(TfOH)as an effective promoting reagent.The effect of reaction conditions such as solvent,the amount of TfOH,reaction temperature,and reactant ratio on the conversion rate and the yield of the reaction,respectively,was systematically investigated,and daidzein was obtained in 74.0%isolated yield under optimal conditions.Due to the facilitating effect of TfOH,the Friedel–Crafts acylation was completed within 10 min at 90℃ and the[5+1]cyclization was completed within 180 min at 25℃.In addition,a possible reaction mechanism for this process was proposed.The results of the study may provide useful guidance for industrial production of daidzein on a large scale.展开更多
Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in re...Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in recent decades.Among the many products of CO_(2)RR(carbon monoxide,acids,aldehydes and alcohols,olefins,etc.),alcohols(methanol,ethanol,propanol,etc.)have a higher market value and energy density,but it is also more difficult to produce.Copper is known to be effective in catalyzing CO_(2) to high valueadded alcohols,but with poor selectivity.The progress of Cu-based catalysts for the selective generation of alcohols,including copper oxides,bimetals,single atoms and composites is reviewed.Meanwhile,to improve Cu-based catalyst activity and modulate product selectivity,the modulation strategies are straighten out,including morphological regulation,crystalline surface,oxidation state,as well as elemental doping and defect engineering.Based on the research progress of electrocatalytic CO_(2) reduction for alcohol production on Cu-based materials,the reaction pathways and the key intermediates of the electrocatalytic CO_(2)RR to methanol,ethanol and propanol are summarized.Finally,the problems of traditional electrocatalytic CO_(2)RR are introduced,and the future applications of machine learning and theoretical calculations are prospected.An in-depth discussion and a comprehensive review of the reaction mechanism,catalyst types and regulation strategies were carried out with a view to promoting the development of electrocatalytic CO_(2)RR to alcohols.展开更多
In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction m...In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.展开更多
The shock-induced reaction mechanism and characteristics of Ni/Al system,considering an Al nanoparticle-embedded Ni single crystal,are investigated through molecular dynamics simulation.For the shock melting of Al nan...The shock-induced reaction mechanism and characteristics of Ni/Al system,considering an Al nanoparticle-embedded Ni single crystal,are investigated through molecular dynamics simulation.For the shock melting of Al nanoparticle,interfacial crystallization and dissolution are the main characteristics.The reaction degree of Al particle first increases linearly and then logarithmically with time driven by rapid mechanical mixing and following dissolution.The reaction rate increases with the decrease of particle diameter,however,the reaction is seriously hindered by interfacial crystallization when the diameter is lower than 9 nm in our simulations.Meanwhile,we found a negative exponential growth in the fraction of crystallized Al atoms,and the crystallinity of B2-NiAl(up to 20%)is positively correlated with the specific surface area of Al particle.This can be attributed to the formation mechanism of B2-NiAl by structural evolution of finite mixing layer near the collapsed interface.For shock melting of both Al particle and Ni matrix,the liquid-liquid phase inter-diffusion is the main reaction mechanism that can be enhanced by the formation of internal jet.In addition,the enhanced diffusion is manifested in the logarithmic growth law of mean square displacement,which results in an almost constant reaction rate similar to the mechanical mixing process.展开更多
The accumulation of excessive nitrate in the atmosphere not only jeopardizes human health but also disrupts the balance of the nitrogen cycle in the ecosystem.Among various nitrate removal technologies,electrocatalyti...The accumulation of excessive nitrate in the atmosphere not only jeopardizes human health but also disrupts the balance of the nitrogen cycle in the ecosystem.Among various nitrate removal technologies,electrocatalytic nitrate reduction reaction(eNO_(3)RR)has been widely studied for its advantages of being eco-friendly,easy to operate,and controllable under environmental conditions with renewable energy as the driving force.Transition metal-based catalysts(TMCs)have been widely used in electrocatalysis due to their abundant reserves,low costs,easy-to-regulate electronic structure and considerable electrochemical activity.In addition,TMCs have been extensively studied in terms of the kinetics of the nitrate reduction reaction,the moderate adsorption energy of nitrogen-containing species and the active hydrogen supply capacity.Based on this,this review firstly discusses the mechanism as well as analyzes the two main reduction products(N_(2)and NH_(3))of eNO_(3)RR,and reveals the basic guidelines for the design of efficient nitrate catalysts from the perspective of the reaction mechanism.Secondly,this review mainly focuses on the recent advances in the direction of eNO_(3RR)with four types of TMCs,Fe,Co,Ni and Cu,and unveils the interfacial modulation strategies of Fe,Co,Ni and Cu catalysts for the activity,reaction pathway and stability.Finally,reasonable suggestions and opportunities are proposed for the challenges and future development of eNO_(3)RR.This review provides far-reaching implications for exploring cost-effective TMCs to replace high-cost noble metal catalysts(NMCs)for eNO_(3)RR.展开更多
The catalytic performance of different acidic catalysts for diethyl oxalate synthesis from the one-step transesterification of dimethyl oxalate and ethanol was evaluated.The effects of different factors(e.g.,acidity,e...The catalytic performance of different acidic catalysts for diethyl oxalate synthesis from the one-step transesterification of dimethyl oxalate and ethanol was evaluated.The effects of different factors(e.g.,acidity,electron accepting capacity,cations type and crystalline water)on the catalytic activity of acidic catalysts were investigated respectively.It was proposed and confirmed that the transesterification reaction catalyzed by a Lewis acid(FeCl3)and a Bronsted acid(H2SO4)follows a first-order kinetic reaction process.In addition,the Lewis acid-catalyzed transesterification processes with different ester structures were used to further explore and understand the speculated reaction mechanism.This work enriches the theoretical understanding of acid-catalyzed transesterification reactions and is of great significance for the development of highly active catalysts for diethyl oxalate synthesis,diminishing the industrial production cost of diethyl oxalate,and developing downstream bulk or high-value-added industrial products.展开更多
Three different reaction mechanisms of kerosene and flamelet models were used to simulate combustion in a reverse-flow combustor.By comparing the effects of different mechanisms on the flow field characteristics,compo...Three different reaction mechanisms of kerosene and flamelet models were used to simulate combustion in a reverse-flow combustor.By comparing the effects of different mechanisms on the flow field characteristics,components and temperature distribution of the combustion chamber,the results showed that:Under different reaction mechanisms,there was a strong similarity between flow filed and temperature field,but the penetration depth and temperature distribution of local jets were affected by the mechanism.Due to the different reaction paths and reaction rates,the distribution of major components had a great degree of similarity,but the concentration of intermediate components varied greatly.Comprehensive analysis,the 16 species and 17 species reaction mechanisms can simulate the flow field and outlet temperature distribution of the combustor well.展开更多
Water oxidation is one of the most important reactions in natural and artificial energy conversion schemes.In nature,solar energy is converted to chemical energy via water oxidation at the oxygen-evolving center of ph...Water oxidation is one of the most important reactions in natural and artificial energy conversion schemes.In nature,solar energy is converted to chemical energy via water oxidation at the oxygen-evolving center of photosystem II to generate dioxygen,protons,and electrons.In artificial energy schemes,water oxidation is one of the half reactions of water splitting,which is an appealing strategy for energy conversion via photocatalytic,electrocatalytic,or photoelectrocatalytic processes.Because it is thermodynamically unfavorable and kinetically slow,water oxidation is the bottleneck for achieving large-scale water splitting.Thus,developing highly efficient water oxidation catalysts has attracted the interests of researchers in the past decades.The formation of O-O bonds is typically the rate-determining step of the water oxidation catalytic cycle.Therefore,better understanding this key step is critical for the rational design of more efficient catalysts.This review focuses on elucidating the evolution of metal-oxygen species during transition metal-catalyzed water oxidation,and more importantly,on discussing the feasible O-O bond formation mechanisms during the oxygen evolution reaction over synthetic molecular catalysts.展开更多
Iron-based catalysts have been explored for selective catalytic reduction(SCR)of NO due to environmentally benign characters and good SCR activity.Mn-W-Sb modified siderite catalysts were prepared by impregnation meth...Iron-based catalysts have been explored for selective catalytic reduction(SCR)of NO due to environmentally benign characters and good SCR activity.Mn-W-Sb modified siderite catalysts were prepared by impregnation method based on siderite ore,and SCR perfor-mance of the catalysts was investigated.The catalysts were analyzed by X-ray diffrac-tion,H_(2)-temperature-programmed reduction,Brunauer-Emmett-Teller,Thermogravimetry-derivative thermogravimetry and in-situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS).The modified siderite catalysts calcined at 450℃ mainly consist of Fe_(2)O_(3),and added Mn,W and Sb species are amorphous.3Mn-5W-1.5Sb-siderite catalyst has a wide temperature window of 180-360℃ and good N_(2) selectivity at low temperatures.In-situ DRIFTS results show NH_(4)^(+),coordinated NH_(3),NH_(2),NO_(3)^(-)species(bidentate),NO_(2)-species(nitro,nitro-nitrito,monodentate),and adsorbed NO_(2) can be discovered on the sur-face of Mn-W-Sb modified siderite catalysts,and doping of Mn will enhance adsorbed NO_(2) formation by synergistic catalysis with Fe^(3+).In addition,the addition of Sb can inhibit sulfates formation on the surface of the catalyst in the presence of SO_(2) and H_(2)O.Time-dependent in-situ DRIFTS studies also indicate that both of Lewis and Br?nsted acid sites play a role in SCR of NO by ammonia at low temperatures.The mechanism of NO removal on the 3Mn-5W-1.5Sb-siderite catalyst can be discovered as a combination of Eley-Rideal and Langmuir-Hinshelwood mechanisms with three reaction pathways.The mechanism of NO,oxidized by synergistic catalysis of Fe^(3+)and Mn^(4+/3+)to form NO_(2) among three pathways,reveals the reason of high NO_(x) conversion of the catalyst at medium and low temperatures.展开更多
基金Project(51304245)supported by the National Natural Science Foundation of ChinaProject(2014T70691)supported by the Postdoctoral Science Foundation of China+1 种基金Project(2015CX005)supported by the Innovation Driven Plan of Central South University,ChinaProject supported by the Hunan Provincial Co-innovation Center for Clean and Efficient Utilization of Strategic Metal Mineral Resources,China
文摘The effects of Ca-based additives on roasting properties of low-grade molybdenum concentrate were studied. The resultsshow that calcium-based additives can react with molybdenum concentrate to form CaSO4 and CaMoO4. The initial oxidationtemperature of MoS2 is 450℃, while the formation of CaMoO4 and CaSO4 occurs above 500℃. The whole calcification reactionsare nearly completed between 600 and 650℃. However, raising the temperature further helps for the formation of CaMoO4 but isdisadvantageous to sulfur fixing rate and molybdenum retention rate. Calcification efficiency of Ca-based additives follows theorder： Ca（OH）2〉CaO〉CaCO3. With increasing the dosage of Ca（OH）2, the molybdenum retention rate and sulfur-fixing rate rise, butexcessive dosages would consume more acid during leaching process. The appropriate mass ratio of Ca（OH）2 to molybdenumconcentrate is 1：1. When roasted at 650 ℃ for 90 min, the molybdenum retention rate and the sulfur-fixing rate of low-grademolybdenum concentrate reach 100% and 92.92%, respectively, and the dissolution rate of molybdenum achieves 99.12% withcalcines being leached by sulphuric acid.
基金the financial support from the National Natural Science Foundation of China(52074084)the Guangxi Innovation-driven Development Program,China(GUIKE AA18118030)。
文摘Na|NaCl-CaCl_(2)|Zn liquid metal battery is regarded as a promising energy storage system for power grids.Despite intensive attempts to present a real mechanism of metal electrodes reaction, those for Na||Zn LMBs are not clear yet. Herein, the anode reactions for the multiple discharge potential plateaus were deduced by means of FactSage thermochemical software, which were subsequently validated by X-ray diffraction analysis and the modeling of phase transformation in the cooling process. A pre-treatment process was proposed for the analysis of anode product composition using the atomic absorption spectrometry method, and the anode states at working temperature(560 ℃) were obtained by the Na-CaZn ternary phase for the first time. The results indicate the discharge of Na and Ca led to the formation of Ca-Zn intermetallic compounds, whilst the extraction of Ca in Ca-Zn intermetallic compounds was responsible for the multiple discharge plateaus. Moreover, it was found that the charging product was in electrochemical double liquid metal layers, which are composed of Na and Ca with dissolved Zn respectively.
文摘The cycloaddition reactions between ketene or substituted ketenes and cyelopentadiene have been studied theoretically by means of the semiempirical AMI method.Three different substituted ketenes have been selected and ten transition states,corresponding to different approach geometries have been located and characterized,The regioselectivity and stereoselectivity of the reactions are correctly predicted by the calculations and the reaction mechanisms are analyzed in terms of electronic and steric effects of the substitutents on the reacting ketene and cyc-lopentadiene.
基金financed by the Natural Science Foundation of Shaanxi Province(2014JM2046,2013JQ2027)the Special Natural Science Foundation of Science and Technology Bureau of Xi’an City Government(CXY1443WL03,CXY1352WL19 and CXY1352WL20)+1 种基金National Science Foundation of China(21303135)the Industrial research project of Science and Technology Department of Shaanxi Province(2013K09-25)
文摘The kinetics and mechanisms of H abstraction reaction between isoflurane and a CI atom have been investigated using DFT and G3（MP2） methods of theory. The geometrical structures of all species were optimized by the wB97XD/6-311＋＋G＊＊ method. Intrinsic reaction coordinate （IRC） analysis has been carried out for the reaction channels. Thermochemistry data have been obtained by utilizing the high accurate model chemistry method G3（MP2） combined with the standard statistical thermodynamic calculations. Gibbs free energies were used for reaction channels analysis. Two channels were obtained, which correspond to P（1） and P（2）. The rate constants for the two channels over a wide temperature range of 200-2000 K were also obtained. The results show that the barriers of P（1） and P（2） reaction channels are 50.36 and 50.34 kJ/mol, respectively, predicting that it exists two competitive channels. The calculated rate constant is in good agreement with the experiment value. Additionally, the results also show that the rate constants also increase from 1.85x10^-16 to 2.16x 10^12 cm3.moleculel.s-1 from 200 to 2000 K
基金Supported by the Natural Science Foundation of Hainan Province(No. 60505) and the Doctoral Research Fund of Hainan Nor-mal University.
文摘The reaction mechanisms of HNCS with NH（X^3∑ ） were theoretically investigated. The minimum energy paths （MEP） of the reaction were calculated by using the density functional theory（DFT） at the B3LYP/6-311 ＋ ＋ G^＊＊ level. The equilibrium structural parameters, the harmonic vibrational frequencies, the total energies, and the zeropoint energies（ZPE） of all the species were calculated. The single-point energies along the MEP were further refined at the QCISD（T）/6-311 ＋ ＋ G^＊ ＊ level. It was found that the mechanisms of the HNCS ＋ NH（X^3∑） reaction involve two channels producing the HNC ＋ HNS and the N2H2 ＋ CS products. Channel 1 plays a dominant role and the HNC ＋ HNS are the main preduets. The reaction is exothermie.
基金financially supported by the National Natural Science Foundation of China(11174215)Natural Science Foundation of Shandong Province(ZR2012BL10)the University Science and Technology Project of Shandong Province(No.J13LD05)
文摘The reaction mechanisms of Ti（~3F） ＋ CH2C12→CH2=TiCl2 and Ti（~3F） ＋ CHC13→HC÷TiCl3 were investigated with Gaussian 03 program package at the B3PW91/6-311＋＋G（d,p）level.The computational results revealed that：1） Both reaction systems are initiated by Ti（~3F） atom attacking the C atom of CH2C12 and CHCl3 to activate a C-Cl bond;2） Both reaction systems were carried out via triplet reaction channels;3） CH2=TiCl2 has singlet and triplet isomers,and the singlet one is more stable;4） The HOMO of CH2=TiCl2（S） illustrates a π-bonding interaction between C and Ti;5） Only singlet HC÷TiCl3 was located,and the Mulliken atomic spin densities show that the two single electrons are mostly on the C atom.
基金supported by the National Natural Science Foundation of China(11174215)Natural Science Foundation of Shandong Province(ZR2012BL10 and ZR2010BL017)+1 种基金the University Science and Technology Project of Shandong Province(No.J13LD05)the Science and Technology Planning Project of Tai'an City(20102024)
文摘The decarboxylation of pyrrole-2-carboxylic acid in acid solutions was elucidated by full optimization with the CPCM solvation model at the B3LYP/6-31 l＋＋G（d,p） level. Compared with the single-point energy calculation, CPCM full optimization is better to model solvent environments to gain reasonable reaction mechanisms. The π interactions play a significant role in the decarboxylation of pyrrole-2-carboxylic acid （R）. Firstly, the a hydrogen is protonated, but all of the carbonyl hydration pathways bear relatively higher energy barriers. The carbonyl group can rove over the pyrrole ring, but it does not lead to the speciation of pyrrole and protonated carbon dioxide for the latter is an energy-rich species. The decarboxylation mechanism proposed here is that, the protonated pyrrole-2-carboxylic acid （RH） decarboxylates via direct C-C bond cleavage with the aid of a water molecule to accommodate the proton on the carbonyl group.
基金We are grateful for the financial support from the research fund for the doctoral program of higher education of China.
文摘The potential energy surface for the CH3S + NO2 reaction has been studied using the ab initio G3 (MP2) method. A variety of possible complexes and saddle points along the minimum energy reaction paths have been characterized at UMP2 (full)/6-31G(d) level. The calculations reveal dominating reaction mechanisms of the title reaction: CH3S + NO2 firstly produce intermediate CH3SONO, then break up into CH3SO + NO. The results are valuable to understand the atmospheric sulfur compounds oxidation mechanism.
基金the National Natural Science Foundation of China(22073079,22025105 and 21873079)the Ministry of Education of China(H20200504)+2 种基金the Top-Notch Young Talents Program of China is gratefully acknowledgedM.S.thanks the Ministerio de Ciencia e Innovación of Spain(project PID2020-113711GB-I00)the Generalitat de Catalunya(project 2017SGR39).
文摘Aromaticity,in general,can promote a given reaction by stabilizing a transition state or a product via a mobility ofπelectrons in a cyclic structure.Similarly,such a promotion could be also achieved by destabilizing an antiaromatic reactant.However,both aromaticity and transition states cannot be directly measured in experiment.Thus,computational chemistry has been becoming a key tool to understand the aromaticity-driven reaction mechanisms.In this review,we will analyze the relationship between aromaticity and reaction mechanism to highlight the importance of density functional theory calculations and present it according to an approach via either aromatizing a transition state/product or destabilizing a reactant by antiaromaticity.Specifically,we will start with a particularly challenging example of dinitrogen activation followed by other small-molecule activation,Csingle bondF bond activation,rearrangement,as well as metathesis reactions.In addition,antiaromaticity-promoted dihydrogen activation,CO_(2)capture,and oxygen reduction reactions will be also briefly discussed.Finally,caution must be cast as the magnitude of the aromaticity in the transition states is not particularly high in most cases.Thus,a proof of an adequate electron delocalization rather than a complete ring current is recommended to support the relatively weak aromaticity in these transition states.
基金Financial support by the National Science Foundation of China (No. 22073079)the Top-Notch Young Talents Program of China is gratefully acknowledged。
文摘Dinitrogen activation under mild conditions is important but extremely challenging due to the inert nature of the N≡N triple bond evidenced by high bond dissociation energy(945 k J/mol) and large HOMOLUMO gap(10.8 e V). In comparison with largely developed transition metal systems, the reported main group species on dinitrogen activation are rare. Here, we carry out density functional theory calculations on methyleneboranes to understand the reaction mechanisms of their dinitrogen activation. It is found that the methyleneboranes without any substituent at the boron atom performs best on dinitrogen activation, which could be contributed to its small singlet-triplet gap. In addition, strong correlations are achieved on dinitrogen activation between the singlet-triplet energy gap and the reaction energies for the formation of the end-on products as well as the side-on ones. The principal interacting orbital analysis suggests that methyleneboranes can mimic transition metals to cleave the N≡N triple bond. Our findings could be helpful for experimental chemists aiming at dinitrogen activation by main group species.
基金the immense support provided by the National Research Foundation of Korea(NRF)Grant funded by the Korean Government(MSIT)(RS-2023–00210114)the National R&D Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(2021M3D1A2051636)。
文摘Hydrogen production by water reduction reactions has received considerable attention because hydrogen is considered a clean-energy carrier,key for a sustainable energy future.Computational methods have been widely used to study the reaction mechanism of the hydrogen evolution reaction(HER),but the calculation results need to be supported by experimental results and direct evidence to confirm the mechanistic insights.In this review,we discuss the fundamental principles of the in situ spectroscopic strategy and a theoretical model for a mechanistic understanding of the HER.In addition,we investigate recent studies by in situ Fourier transform infrared(FTIR),Raman spectroscopy,and X-ray absorption spectroscopy(XAS) and cover new findings that occur at the catalyst-electrolyte interface during HER.These spectroscopic strategies provide practical ways to elucidate catalyst phase,reaction intermediate,catalyst-electrolyte interface,intermediate binding energy,metal valency state,and coordination environment during HER.
基金the Science and Technology Planning Project of Guangdong Province(2016B090934002)Guangdong Provincial Natural Science Foundation(2023A1515011640)for financial support.
文摘Daidzein has been widely used in pharmaceuticals,nutraceuticals,cosmetics,feed additives,etc.Its preparation process and related reaction mechanism need to be further investigated.A cost-effective process for synthesizing daidzein was developed in this work.In this article,a two-step synthesis of daidzein(Friedel–Crafts acylation and[5+1]cyclization)was developed via the employment of trifluoromethanesulfonic acid(TfOH)as an effective promoting reagent.The effect of reaction conditions such as solvent,the amount of TfOH,reaction temperature,and reactant ratio on the conversion rate and the yield of the reaction,respectively,was systematically investigated,and daidzein was obtained in 74.0%isolated yield under optimal conditions.Due to the facilitating effect of TfOH,the Friedel–Crafts acylation was completed within 10 min at 90℃ and the[5+1]cyclization was completed within 180 min at 25℃.In addition,a possible reaction mechanism for this process was proposed.The results of the study may provide useful guidance for industrial production of daidzein on a large scale.
基金supported by the Fundamental Research Funds for the Central Universities (FRF-EYIT-23-07)。
文摘Electrocatalytic CO_(2) reduction reaction(CO_(2)RR)technology,which enables carbon capture storage and resource utilization by reducing CO_(2) to valuable chemicals or fuels,has become a global research hotspot in recent decades.Among the many products of CO_(2)RR(carbon monoxide,acids,aldehydes and alcohols,olefins,etc.),alcohols(methanol,ethanol,propanol,etc.)have a higher market value and energy density,but it is also more difficult to produce.Copper is known to be effective in catalyzing CO_(2) to high valueadded alcohols,but with poor selectivity.The progress of Cu-based catalysts for the selective generation of alcohols,including copper oxides,bimetals,single atoms and composites is reviewed.Meanwhile,to improve Cu-based catalyst activity and modulate product selectivity,the modulation strategies are straighten out,including morphological regulation,crystalline surface,oxidation state,as well as elemental doping and defect engineering.Based on the research progress of electrocatalytic CO_(2) reduction for alcohol production on Cu-based materials,the reaction pathways and the key intermediates of the electrocatalytic CO_(2)RR to methanol,ethanol and propanol are summarized.Finally,the problems of traditional electrocatalytic CO_(2)RR are introduced,and the future applications of machine learning and theoretical calculations are prospected.An in-depth discussion and a comprehensive review of the reaction mechanism,catalyst types and regulation strategies were carried out with a view to promoting the development of electrocatalytic CO_(2)RR to alcohols.
基金supported by the Qingdao Postdoctoral Program Funding(QDBSH20220202045)Shandong provincial Natural Science Foundation(ZR2021ME049,ZR2022ME176)+1 种基金National Natural Science Foundation of China(22078176)Taishan Industrial Experts Program(TSCX202306135).
文摘In this study,the impact of different reaction times on the preparation of powdered activated carbon(PAC)using a one-step rapid activation method under flue gas atmosphere is investigated,and the underlying reaction mechanism is summarized.Results indicate that the reaction process of this method can be divided into three stages:stage I is the rapid release of volatiles and the rapid consumption of O_(2),primarily occurring within a reaction time range of 0-0.5 s;stage II is mainly the continuous release and diffusion of volatiles,which is the carbonization and activation coupling reaction stage,and the carbonization process is the main in this stage.This stage mainly occurs at the reaction time range of 0.5 -2.0 s when SL-coal is used as material,and that is 0.5-3.0 s when JJ-coal is used as material;stage III is mainly the activation stage,during which activated components diffuse to both the surface and interior of particles.This stage mainly involves the reaction stage of CO_(2)and H2O(g)activation,and it mainly occurs at the reaction time range of 2.0-4.0 s when SL-coal is used as material,and that is 3.0-4.0 s when JJ-coal is used as material.Besides,the main function of the first two stages is to provide more diffusion channels and contact surfaces/activation sites for the diffusion and activation of the activated components in the third stage.Mastering the reaction mechanism would serve as a crucial reference and foundation for designing the structure,size of the reactor,and optimal positioning of the activator nozzle in PAC preparation.
基金supported by the State Key Program of National Natural Science Foundation of China(Grant No.12132003)State Key Laboratory of Explosion Science and Technology(Grant No.QNKT20-07)。
文摘The shock-induced reaction mechanism and characteristics of Ni/Al system,considering an Al nanoparticle-embedded Ni single crystal,are investigated through molecular dynamics simulation.For the shock melting of Al nanoparticle,interfacial crystallization and dissolution are the main characteristics.The reaction degree of Al particle first increases linearly and then logarithmically with time driven by rapid mechanical mixing and following dissolution.The reaction rate increases with the decrease of particle diameter,however,the reaction is seriously hindered by interfacial crystallization when the diameter is lower than 9 nm in our simulations.Meanwhile,we found a negative exponential growth in the fraction of crystallized Al atoms,and the crystallinity of B2-NiAl(up to 20%)is positively correlated with the specific surface area of Al particle.This can be attributed to the formation mechanism of B2-NiAl by structural evolution of finite mixing layer near the collapsed interface.For shock melting of both Al particle and Ni matrix,the liquid-liquid phase inter-diffusion is the main reaction mechanism that can be enhanced by the formation of internal jet.In addition,the enhanced diffusion is manifested in the logarithmic growth law of mean square displacement,which results in an almost constant reaction rate similar to the mechanical mixing process.
基金National Natural Science Foundation of China(Nos.52172291 and 52122312)“Dawn”Program of Shanghai Education Commission,China(No.22SG31)。
文摘The accumulation of excessive nitrate in the atmosphere not only jeopardizes human health but also disrupts the balance of the nitrogen cycle in the ecosystem.Among various nitrate removal technologies,electrocatalytic nitrate reduction reaction(eNO_(3)RR)has been widely studied for its advantages of being eco-friendly,easy to operate,and controllable under environmental conditions with renewable energy as the driving force.Transition metal-based catalysts(TMCs)have been widely used in electrocatalysis due to their abundant reserves,low costs,easy-to-regulate electronic structure and considerable electrochemical activity.In addition,TMCs have been extensively studied in terms of the kinetics of the nitrate reduction reaction,the moderate adsorption energy of nitrogen-containing species and the active hydrogen supply capacity.Based on this,this review firstly discusses the mechanism as well as analyzes the two main reduction products(N_(2)and NH_(3))of eNO_(3)RR,and reveals the basic guidelines for the design of efficient nitrate catalysts from the perspective of the reaction mechanism.Secondly,this review mainly focuses on the recent advances in the direction of eNO_(3RR)with four types of TMCs,Fe,Co,Ni and Cu,and unveils the interfacial modulation strategies of Fe,Co,Ni and Cu catalysts for the activity,reaction pathway and stability.Finally,reasonable suggestions and opportunities are proposed for the challenges and future development of eNO_(3)RR.This review provides far-reaching implications for exploring cost-effective TMCs to replace high-cost noble metal catalysts(NMCs)for eNO_(3)RR.
基金funded by the Key Projects of Xinjiang Production and Construction Corps(2022AB007)the Key Projects of innovation team of Xinjiang eighth division Construction Corps 2023TD04)Liaoning Innovation Capability Fund(2021-NLTS-12-02).
文摘The catalytic performance of different acidic catalysts for diethyl oxalate synthesis from the one-step transesterification of dimethyl oxalate and ethanol was evaluated.The effects of different factors(e.g.,acidity,electron accepting capacity,cations type and crystalline water)on the catalytic activity of acidic catalysts were investigated respectively.It was proposed and confirmed that the transesterification reaction catalyzed by a Lewis acid(FeCl3)and a Bronsted acid(H2SO4)follows a first-order kinetic reaction process.In addition,the Lewis acid-catalyzed transesterification processes with different ester structures were used to further explore and understand the speculated reaction mechanism.This work enriches the theoretical understanding of acid-catalyzed transesterification reactions and is of great significance for the development of highly active catalysts for diethyl oxalate synthesis,diminishing the industrial production cost of diethyl oxalate,and developing downstream bulk or high-value-added industrial products.
基金supported by National Science and Technology Major Project(2017-III-0002-0026,2017-III-0007-0032)。
文摘Three different reaction mechanisms of kerosene and flamelet models were used to simulate combustion in a reverse-flow combustor.By comparing the effects of different mechanisms on the flow field characteristics,components and temperature distribution of the combustion chamber,the results showed that:Under different reaction mechanisms,there was a strong similarity between flow filed and temperature field,but the penetration depth and temperature distribution of local jets were affected by the mechanism.Due to the different reaction paths and reaction rates,the distribution of major components had a great degree of similarity,but the concentration of intermediate components varied greatly.Comprehensive analysis,the 16 species and 17 species reaction mechanisms can simulate the flow field and outlet temperature distribution of the combustor well.
文摘Water oxidation is one of the most important reactions in natural and artificial energy conversion schemes.In nature,solar energy is converted to chemical energy via water oxidation at the oxygen-evolving center of photosystem II to generate dioxygen,protons,and electrons.In artificial energy schemes,water oxidation is one of the half reactions of water splitting,which is an appealing strategy for energy conversion via photocatalytic,electrocatalytic,or photoelectrocatalytic processes.Because it is thermodynamically unfavorable and kinetically slow,water oxidation is the bottleneck for achieving large-scale water splitting.Thus,developing highly efficient water oxidation catalysts has attracted the interests of researchers in the past decades.The formation of O-O bonds is typically the rate-determining step of the water oxidation catalytic cycle.Therefore,better understanding this key step is critical for the rational design of more efficient catalysts.This review focuses on elucidating the evolution of metal-oxygen species during transition metal-catalyzed water oxidation,and more importantly,on discussing the feasible O-O bond formation mechanisms during the oxygen evolution reaction over synthetic molecular catalysts.
基金This work was supported by the National Natural Science Foundation of China(Nos.51406077 and 51276039).
文摘Iron-based catalysts have been explored for selective catalytic reduction(SCR)of NO due to environmentally benign characters and good SCR activity.Mn-W-Sb modified siderite catalysts were prepared by impregnation method based on siderite ore,and SCR perfor-mance of the catalysts was investigated.The catalysts were analyzed by X-ray diffrac-tion,H_(2)-temperature-programmed reduction,Brunauer-Emmett-Teller,Thermogravimetry-derivative thermogravimetry and in-situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS).The modified siderite catalysts calcined at 450℃ mainly consist of Fe_(2)O_(3),and added Mn,W and Sb species are amorphous.3Mn-5W-1.5Sb-siderite catalyst has a wide temperature window of 180-360℃ and good N_(2) selectivity at low temperatures.In-situ DRIFTS results show NH_(4)^(+),coordinated NH_(3),NH_(2),NO_(3)^(-)species(bidentate),NO_(2)-species(nitro,nitro-nitrito,monodentate),and adsorbed NO_(2) can be discovered on the sur-face of Mn-W-Sb modified siderite catalysts,and doping of Mn will enhance adsorbed NO_(2) formation by synergistic catalysis with Fe^(3+).In addition,the addition of Sb can inhibit sulfates formation on the surface of the catalyst in the presence of SO_(2) and H_(2)O.Time-dependent in-situ DRIFTS studies also indicate that both of Lewis and Br?nsted acid sites play a role in SCR of NO by ammonia at low temperatures.The mechanism of NO removal on the 3Mn-5W-1.5Sb-siderite catalyst can be discovered as a combination of Eley-Rideal and Langmuir-Hinshelwood mechanisms with three reaction pathways.The mechanism of NO,oxidized by synergistic catalysis of Fe^(3+)and Mn^(4+/3+)to form NO_(2) among three pathways,reveals the reason of high NO_(x) conversion of the catalyst at medium and low temperatures.
