Objective To investigate the histological changes of rapid tooth movement in dogs treated by resistance reduction and distraction osteogenesis,aiming to establish an animal model and further to reveal the remodeling m...Objective To investigate the histological changes of rapid tooth movement in dogs treated by resistance reduction and distraction osteogenesis,aiming to establish an animal model and further to reveal the remodeling mechanism of rapid tooth movement. Methods A total of 8 local hybrid dogs were selected as subjects for this study. The second pre-molar was extracted on both sides. The experimental side underwent alvelor surgery for resistance reduction and a home-made tooth-borne intraoral distraction device was installed for rapid tooth movement,while for the other side (control side) only tooth-borne intraoral distraction device was used for rapid tooth movement. The longest active force-delivery span was 2 weeks,followed by 6-week retention. The distance between the moved tooth and anchor unit was recorded weekly,and radiography was performed for each side before and after distraction. The surrounding tissues including periodontal ligament and alveolar bone were sectioned for histological analysis. Results The average distance of tooth movement was 3.55mm on the experimental side and 1.11mm on the control side. The rate of tooth movement was notably higher (P<0.01) and no significant apical root resorption was detected by X-ray on the experimental side. The active alvelor bone remodeling was found on the tension and pressure sides. However,there was no significant difference between the experimental side and the control side after the retention period. Conclusion The rate of orthodontic tooth movement can be accelerated through resistance reduction and periodontal distraction without any unfavorable effects but at minimal anchorage loss.展开更多
Aims: The objective of this study was to investigate the effect of free fatty acid length chain and unsaturated bond number on the heat resistance and recovery media of bacterial spores. Methods and results: For 6 spe...Aims: The objective of this study was to investigate the effect of free fatty acid length chain and unsaturated bond number on the heat resistance and recovery media of bacterial spores. Methods and results: For 6 species, bacterial spore heat resistances were estimated at different free fatty acid concentrations added to heating media or in recovery media. The addition of free fatty acids to heating media has a slight influence on the heat resistance of bacterial spores whatever the species or type of acid studied. On the contrary, the addition of free fatty acids to the recovery medium after the heat treatment greatly reduces the ability to bacterial spores to recover and form colonies. This effect varies depending on chain length, unsaturated bond number of fatty acid and on the bacterial strain studied. Conclusion: The presence of free acids in the recovery media is an additive stress which decreases the capability of injured spores to germinate and grow thereafter. Significance and impact of this study: The impact of free fatty acids presented in this study can be taken into account to reduce the thermal intensity of food sterilization in relation to their availability in food matrix.展开更多
This research is intended to provide academic reference and design guidance for further studies to determine the most effective means to reduce a ship’s resistance through an air-cavity. On the basis of potential the...This research is intended to provide academic reference and design guidance for further studies to determine the most effective means to reduce a ship’s resistance through an air-cavity. On the basis of potential theory and on the assumption of an ideal and irrotational fluid, this paper drives a method for calculating air cavity formation using slender ship theory then points out the parameters directly related to the formation of air cavities and their interrelationships. Simulations showed that the formation of an air cavity is affected by cavitation number, velocity, groove geometry and groove size. When the ship’s velocity and groove structure are given, the cavitation number must be within range to form a steady air cavity. The interface between air and water forms a wave shape and could be adjusted by an air injection system.展开更多
To protect humans, devices and maintain high reliability of electrical equipments, efficient earthing system has to be provided for residential and commercial buildings. The use of chemical elements around the electro...To protect humans, devices and maintain high reliability of electrical equipments, efficient earthing system has to be provided for residential and commercial buildings. The use of chemical elements around the electrode of earthing systems reduces the earth resistance which improves the efficiency of these systems. However, the use of these elements can’t achieve very small earth resistance especially in the case of dry clay. In addition, they are expensive and not available all the time. This paper presents a method that treats the soil with adding the Dead Sea water instead of the chemical elements to further reduce the earth resistance and to avoid the expenses of these elements. In our approach, the Dead Sea water is added to a hole around the electrode with a distance not exceeding 10 cm to avoid the corrosion layer on the electrode. Practical measurements are demonstrated to show the efficiency of the proposed approach.展开更多
Lateral resistance of silicon-based p-type and n-type Schottky junctions is investigated. After one electrode on a metallic film is irradiated, the differential lateral resistance of the system is dependent on the dir...Lateral resistance of silicon-based p-type and n-type Schottky junctions is investigated. After one electrode on a metallic film is irradiated, the differential lateral resistance of the system is dependent on the direction of the bias current:it keeps constant in one direction and decreases in the opposite direction. By systematically investigating the electrical potential changes in silicon and the junction, we propose a new mechanism based on light-controlled leak current. Our work provides an insight into the nature of this phenomenon and will facilitate the advanced design of switchable devices.展开更多
The tangent resistance on the interface of the soil-moldboard is an important component of the resistance to moving soil . We developed simplified mechanical models to analyze this resistance. We found that it is comp...The tangent resistance on the interface of the soil-moldboard is an important component of the resistance to moving soil . We developed simplified mechanical models to analyze this resistance. We found that it is composed of two components, the frictional and adhesive resistances. These two components originate from the soil pore, which induced a capillary suction effect, and the soil-moldboard contact area produced tangent adhesive resistance. These two components varied differently with soil moisture. Thus we predicted that resistance reduction against soil exerted on the non-smooth bionic moldboard is mainly due to the elimination of capillary suction and the reduction of physical-chemical adsorption of soil.展开更多
The crawling process of snakes is known to have fascinating tribological phenomena,whereas investigations on their frictional properties depending on patterned cuticles are insufficient.In this study,we have designed ...The crawling process of snakes is known to have fascinating tribological phenomena,whereas investigations on their frictional properties depending on patterned cuticles are insufficient.In this study,we have designed and fabricated biomimetic microstructures inspired by the geometric microunits of Achalinus spinalis cuticle using polyurethane acrylate(PUA)material and performed its tribological analysis.The micro-morphology of this Achalinus-inspired textured polymer surface(AITPS)is characterized by the closely and evenly quasi-rectangular microgrooves,periodically arranged along certain orientations.We have compared the frictional performance of our fabricated AITPS with other competitive microstructure,using a smooth steel ball and commercial clay as an interacting surface.After performing massive friction tests with steel ball and clay,AITPS still maintains good resistance reduction performed compared to the patterned surface with straight microgrooves,which is most likely due to the reduction of actual contact areas at the frictional interface.展开更多
Thermal alkaline hydrolysis is a common pretreatment method for the utilization of excess activated sludge(EAS).Owing to strict environment laws and need for better energy utilization,new methods were developed in thi...Thermal alkaline hydrolysis is a common pretreatment method for the utilization of excess activated sludge(EAS).Owing to strict environment laws and need for better energy utilization,new methods were developed in this study to improve the efficiency of pretreatment method.Direct thermal hydrolysis(TH),pasteurized thermal hydrolysis(PTH),and alkaline pasteurized thermal hydrolysis(PTH+CaO and PTH+NaOH)methods were used to treat EAS.Each method was compared and analyzed in terms of dissolution in ammonium nitrogen(NH_(4)^(+)-N)and soluble COD(SCOD)in EAS.Furthermore,the removal of tetracycline resistance genes(TRGs)and class 1 transposon gene intI1 from EAS was investigated.The NH_(4)^(+)-N and SCOD concentrations in EAS treated by PTH were 1.24 and 2.58 times higher than those of TH.However,the removal efficiency of total TRGs and intI1 between the groups was comparable.The SCOD concentration of the PTH+NaOH group was 4.37 times higher than that of the PTH group,and the removal efficiency of total TRGs was increased by 9.52%compared with that by PTH.The NH_(4)^(+)-N and SCOD concentrations of the PTH+CaO group could reach 85.04%and 92.14%of the PTH+NaOH group,but the removal efficiency of total TRGs by PTH+CaO was 19.78%lower than that by PTH+NaOH.Thus,to reduce the financial cost in actual operation,lime(CaO)can be used instead of a strong alkali(NaOH),and pasteurized steam at 70℃ instead of conventional high-temperature heating to treat EAS.This study provides a reference for the development of alkaline hydrolysis under moderate temperatures along with the removal of TRGs in EAS.展开更多
Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selectiv...Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.展开更多
Antibiotic resistance poses a significant global health threat, necessitating a thorough understanding of its prevalence in various ecological contexts. Medicinal plants, renowned for their therapeutic properties, hos...Antibiotic resistance poses a significant global health threat, necessitating a thorough understanding of its prevalence in various ecological contexts. Medicinal plants, renowned for their therapeutic properties, host endophytic bacteria that produce bioactive compounds. Understanding antibiotic resistance dynamics in these bacteria is vital for human health and antibiotic efficacy preservation. In this study, we investigated antibiotic resistance profiles in endophytic bacteria from five medicinal plants: Thankuni, Neem, Aparajita, Joba, and Snake plant. We isolated and characterized 113 endophytic bacteria, with varying resistance patterns observed against multiple antibiotics. Notably, 53 strains were multidrug-resistant (MDR), with 14 exhibiting extensive drug resistance (XDR). Thankuni-associated bacteria displayed 44% MDR and 11% XDR, while Neem-associated bacteria showed higher resistance (60% MDR, 13% XDR). Aparajita-associated bacteria had lower resistance (22% MDR, 6% XDR), whereas Joba-associated bacteria exhibited substantial resistance (54% MDR, 14% XDR). Snake plant-associated bacteria showed 7% MDR and 4% XDR. Genus-specific distribution revealed Bacillus (47%), Staphylococcus (21%), and Klebsiella (11%) as major contributors to MDR. Our findings highlight diverse drug resistance patterns among plant-associated bacteria and underscore the complexity of antibiotic resistance dynamics in diverse plant environments. Identification of XDR strains emphasizes the severity of the antibiotic resistance problem, warranting further investigation into contributing factors.展开更多
Purpose:The aim of this umbrella review was to determine the impact of resistance training(RT)and individual RT prescription variables on muscle mass,strength,and physical function in healthy adults.Methods:Following ...Purpose:The aim of this umbrella review was to determine the impact of resistance training(RT)and individual RT prescription variables on muscle mass,strength,and physical function in healthy adults.Methods:Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses(PRISMA)guidelines,we systematically searched and screened eligible systematic reviews reporting the effects of differing RT prescription variables on muscle mass(or its proxies),strength,and/or physical function in healthy adults aged>18 years.Results:We identified 44 systematic reviews that met our inclusion criteria.The methodological quality of these reviews was assessed using A Measurement Tool to Assess Systematic Reviews;standardized effectiveness statements were generated.We found that RT was consistently a potent stimulus for increasing skeletal muscle mass(4/4 reviews provide some or sufficient evidence),strength(4/6 reviews provided some or sufficient evidence),and physical function(1/1 review provided some evidence).RT load(6/8 reviews provided some or sufficient evidence),weekly frequency(2/4 reviews provided some or sufficient evidence),volume(3/7 reviews provided some or sufficient evidence),and exercise order(1/1 review provided some evidence)impacted RT-induced increases in muscular strength.We discovered that 2/3 reviews provided some or sufficient evidence that RT volume and contraction velocity influenced skeletal muscle mass,while 4/7 reviews provided insufficient evidence in favor of RT load impacting skeletal muscle mass.There was insufficient evidence to conclude that time of day,periodization,inter-set rest,set configuration,set end point,contraction velocity/time under tension,or exercise order(only pertaining to hypertrophy)influenced skeletal muscle adaptations.A paucity of data limited insights into the impact of RT prescription variables on physical function.Conclusion:Overall,RT increased muscle mass,strength,and physical function compared to no exercise.RT intensity(load)and weekly frequency impacted RT-induced increases in muscular strength but not muscle hypertrophy.RT volume(number of sets)influenced muscular strength and hypertrophy.展开更多
Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for ca...Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO_(2), Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C_(2+) compounds through C–C coupling process. Herein, the basic principles of photocatalytic CO_(2) reduction reactions(PCO_(2)RR) and electrocatalytic CO_(2) reduction reaction(ECO_(2)RR) and the pathways for the generation C_(2+) products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO_(2)RR and ECO_(2)RR is emphasized. Through a review of recent studies on PCO_(2)RR and ECO_(2)RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C_(2+) products. Finally, the opportunities and challenges associated with Cu-based materials in the CO_(2) catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO_(2) reduction processes in the future.展开更多
The authors regret to report a mistake in the text and an associated change necessary to section 3.6 of the paper.On page 1766 in the right-hand column,line 4,the heading of subsection 3.6“GmWRKY40 represses the expr...The authors regret to report a mistake in the text and an associated change necessary to section 3.6 of the paper.On page 1766 in the right-hand column,line 4,the heading of subsection 3.6“GmWRKY40 represses the expression of PR genes”should be changed to“GmWRKY40 promotes the expression of PR genes”.The authors would like to apologize for any inconvenience caused.展开更多
In Africa, each year, there are estimated to be more than 91 million cases of salmonellosis and 137,000 cases of death. The problem of antibiotic resistance in Salmonella strains is a threat to public health. The obje...In Africa, each year, there are estimated to be more than 91 million cases of salmonellosis and 137,000 cases of death. The problem of antibiotic resistance in Salmonella strains is a threat to public health. The objective of this study is to evaluate the antibiotic resistance profile of Salmonella strains isolated in biological products analyzed at the National Laboratory of Clinical Biology and Public Health (NLCBPH) in Bangui. This is, therefore, a cross-sectional study with a descriptive aim, running from January to December 2022. It focused on the strains of Salmonella isolated and identified in stools, urines, and blood samples. For each strain of Salmonella isolated, an antibiogram was carried out following the recommendations of the French Society of Microbiology (CASFM, 2022). A total of 93 strains of Salmonella have been recorded. The age group 0 - 9 years was 29% and that of >50 years was 11%. The median age of patients was 30 years with a minimum of 1 and a maximum of 78 years. The female gender was more represented at 52.69% than the male gender at 47.31%, i.e. a sex ratio of 0.89 (M/F). Salmonella strains were much more isolated in stools at 62% followed by urines at 29% and blood at 6%. Salmonella arizonae strains were more represented with 52%. Salmonella strains have a resistance rate to Tetracycline of 62.37% followed by Penicillins of 50%. The rate of multi-antibiotic resistance of the Salmonella strains isolated represented 48.38%. Salmonella spp. strains were multi-resistant at 58.69% followed by Salmonella arizonae strains at 47.91%. There is a significant association between the different families of antibiotics and Salmonella strains (p < 0.05). According to the results obtained, Penicillins, Phenicoles, and Cyclins had a high rate of resistance on Salmonella strains. No strain-producing Broad Spectrum Beta-lactamase has been isolated. Salmonella strains represent a zoonotic health danger, constitute a public health problem and remain a current subject. This germ is resistant to the antibiotics used. It is, therefore, essential to emphasize monitoring the resistance of these germs in the Central African Republic (CAR) to improve the health of the population.展开更多
Oxazolidinones are highly effective antimicrobial agents for the treatment of serious infections caused by Gram-positive organisms,including methicillin-resistant Staphylococcus aureus(MRSA),vancomycin-resistant enter...Oxazolidinones are highly effective antimicrobial agents for the treatment of serious infections caused by Gram-positive organisms,including methicillin-resistant Staphylococcus aureus(MRSA),vancomycin-resistant enterococci(VRE),multidrug-resistant(MDR)pneumococci and MDR mycobacteria(Brenciani et al.2022).However,the emergence and prevalence of acquired oxazolidinone resistance genes.展开更多
The accessibility of tetracycline resistance gene (tetG) into the pores of activated carbon (AC), as well as the impact of the pore size distribution (PSD) of AC on the uptake capacity of tetG, were investigated using...The accessibility of tetracycline resistance gene (tetG) into the pores of activated carbon (AC), as well as the impact of the pore size distribution (PSD) of AC on the uptake capacity of tetG, were investigated using eight types of AC (four coal-based and four wood-based). AC showed the capability to admit tetG and the average reduction of tetG for coal-based and wood-based ACs at the AC dose of 1 g·L<sup>-1</sup> was 3.12 log and 3.65 log, respectively. The uptake kinetic analysis showed that the uptake of the gene followed the pseudo-second-order kinetics reaction, and the uptake rate constant for the coal-based and wood-based ACs was in the range of 5.97 × 10<sup>-12</sup> - 4.64 × 10<sup>-9</sup> and 7.02 × 10<sup>-11</sup> - 1.59 × 10<sup>-8</sup> copies·mg<sup>-1</sup>·min<sup>-1</sup>, respectively. The uptake capacity analysis by fitting the obtained experiment data with the Freundlich isotherm model indicated that the uptake constant (K<sub>F</sub>) values were 1.71 × 10<sup>3</sup> - 8.00 × 10<sup>9</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for coal-based ACs and 7.00 × 10<sup>8</sup> - 3.00 × 10<sup>10</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for wood-based ones. In addition, the correlation analysis between K<sub>F</sub> values and pore volume as well as pore surface at different pore size regions of ACs showed that relatively higher positive correlation was found for pores of 50 - 100 Å, suggesting ACs with more pores in this size region can uptake more tetG. The findings of this study are valuable as reference for optimizing the adsorption process regarding antibiotic resistance-related concerns in drinking water treatment.展开更多
Background: Antifungal resistance (AFR) is a global public health problem with devastating effects, especially among immunocompromised individuals. Addressing AFR requires a One Health approach including Antifungal St...Background: Antifungal resistance (AFR) is a global public health problem with devastating effects, especially among immunocompromised individuals. Addressing AFR requires a One Health approach including Antifungal Stewardship (AFS). This study aimed to comprehensively review global studies published on fungal infections and AFR and to recommend solutions to address this growing problem. Materials and Methods: This was a narrative review that was conducted using published papers on fungal infections, AFR, and AFS between January 1961 and March 2024. The literature was searched using PubMed, Google Scholar, Web of Science, and EMBASE. Results: This found that there has been an increase in fungal infections globally, especially among immunocompromised patients. Due to this increase in fungal infections, there has been a proportionate increase in the use of antifungal agents to prevent and treat fungal infections. This increased use of antifungal agents has worsened the problem of AFR contributing to increased morbidity and mortality. Globally, fungal infections have contributed to 150 million infections annually and 1.7 million deaths per year. By the year 2023, over 3.8 million people died from fungal infections. Addressing AFR remains a challenge because the treatment of antifungal-resistant infections is difficult. Finally, the treatment of fungal infections is a global challenge exacerbated by the limited number of antifungal agents to treat invasive fungal infections. Conclusion: The results of this study indicated that fungal infections and AFR are prevalent across humans, animals, agriculture, and the environment. Addressing this problem requires the provision of solutions such as improving the awareness of AFR, conducting further research on the discovery of new antifungal agents, and implementing AFS programs. If this global problem is not addressed, the morbidity and mortality associated with AFR will continue to rise in the future.展开更多
Attribute reduction is a research hotspot in rough set theory. Traditional heuristic attribute reduction methods add the most important attribute to the decision attribute set each time, resulting in multiple redundan...Attribute reduction is a research hotspot in rough set theory. Traditional heuristic attribute reduction methods add the most important attribute to the decision attribute set each time, resulting in multiple redundant attribute calculations, high time consumption, and low reduction efficiency. In this paper, based on the idea of sequential three-branch decision classification domain, attributes are treated as objects of three-branch division, and attributes are divided into core attributes, relatively necessary attributes, and unnecessary attributes using attribute importance and thresholds. Core attributes are added to the decision attribute set, unnecessary attributes are rejected from being added, and relatively necessary attributes are repeatedly divided until the reduction result is obtained. Experiments were conducted on 8 groups of UCI datasets, and the results show that, compared to traditional reduction methods, the method proposed in this paper can effectively reduce time consumption while ensuring classification performance.展开更多
To improve the cruise flight performance of aircraft, two new configurations of plasma actuators(grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. Th...To improve the cruise flight performance of aircraft, two new configurations of plasma actuators(grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. The induced jet characteristics of the two actuators in quiescent air were diagnosed with high-speed particle image velocimetry(PIV), and their drag reduction efficiencies were examined under different operating conditions in a wind tunnel. The results showed that the grid-type plasma actuator was capable of producing a wall-normal jet array(peak magnitude: 1.07 m/s) similar to that generated in a micro-blowing technique, while the superdense array plasma actuator created a wavy wall-parallel jet(magnitude: 0.94 m/s) due to the discrete spanwise electrostatic forces. Under a comparable electrical power consumption level,the super-dense array plasma actuator array significantly outperformed the grid-type configuration,reducing the total airfoil friction drag by approximately 22% at a free-stream velocity of 20 m/s.The magnitude of drag reduction was proportional to the dimensionless jet velocity ratio(r), and a threshold r = 0.014 existed under which little impact on airfoil drag could be discerned.展开更多
Combination of CO_(2) capture using inorganic alkali with subsequently electrochemical conversion of the resultant HCO_(3)^(-)to high-value chemicals is a promising route of low cost and high efficiency.The electroche...Combination of CO_(2) capture using inorganic alkali with subsequently electrochemical conversion of the resultant HCO_(3)^(-)to high-value chemicals is a promising route of low cost and high efficiency.The electrochemical reduction of HCO_(3)^(-)is challenging due to the inaccessible of negatively charged molecular groups to the electrode surface.Herein,we adopt a comprehensive strategy to tackle this challenge,i.e.,cascade of in situ chemical conversion of HCO_(3)^(-)to CO_(2) and CO_(2) electrochemical reduction in a flow cell.With a tailored Ni-N-S single atom catalyst(SACs),where sulfur(S)atoms located in the second shell of Ni center,the CO_(2)electroreduction(CO_(2)ER)to CO is boosted.The experimental results and density functional theory(DFT)calculations reveal that the introduction of S increases the p electron density of N atoms near Ni atom,thereby stabilizing^(*)H over N and boosting the first proton coupled electron transfer process of CO_(2)ER,i.e.,^(*)+e^(-)+^(*)H+^(*)CO_(2)→^(*)COOH.As a result,the obtained catalyst exhibits a high faradaic efficiency(FE_(CO)~98%)and a low overpotential of 425 mV for CO production as well as a superior turnover frequency(TOF)of 47397 h^(-1),outcompeting most of the reported Ni SACs.More importantly,an extremely high FECOof 90%is achieved at 50 mA cm^(-2)in the designed membrane electrode assembly(MEA)cascade electrolyzer fed with liquid bicarbonate.This work not only highlights the significant role of the second coordination on the first coordination shell of the central metal for CO_(2)ER,but also provides an alternative and feasible strategy to realize the electrochemical conversion of HCO_(3)^(-)to high-value chemicals.展开更多
基金supported by the Traditional Chinese Medicine Research Fund of the Administration of Traditional ChineseMedicine of Shaanxi Province (jc34)
文摘Objective To investigate the histological changes of rapid tooth movement in dogs treated by resistance reduction and distraction osteogenesis,aiming to establish an animal model and further to reveal the remodeling mechanism of rapid tooth movement. Methods A total of 8 local hybrid dogs were selected as subjects for this study. The second pre-molar was extracted on both sides. The experimental side underwent alvelor surgery for resistance reduction and a home-made tooth-borne intraoral distraction device was installed for rapid tooth movement,while for the other side (control side) only tooth-borne intraoral distraction device was used for rapid tooth movement. The longest active force-delivery span was 2 weeks,followed by 6-week retention. The distance between the moved tooth and anchor unit was recorded weekly,and radiography was performed for each side before and after distraction. The surrounding tissues including periodontal ligament and alveolar bone were sectioned for histological analysis. Results The average distance of tooth movement was 3.55mm on the experimental side and 1.11mm on the control side. The rate of tooth movement was notably higher (P<0.01) and no significant apical root resorption was detected by X-ray on the experimental side. The active alvelor bone remodeling was found on the tension and pressure sides. However,there was no significant difference between the experimental side and the control side after the retention period. Conclusion The rate of orthodontic tooth movement can be accelerated through resistance reduction and periodontal distraction without any unfavorable effects but at minimal anchorage loss.
文摘Aims: The objective of this study was to investigate the effect of free fatty acid length chain and unsaturated bond number on the heat resistance and recovery media of bacterial spores. Methods and results: For 6 species, bacterial spore heat resistances were estimated at different free fatty acid concentrations added to heating media or in recovery media. The addition of free fatty acids to heating media has a slight influence on the heat resistance of bacterial spores whatever the species or type of acid studied. On the contrary, the addition of free fatty acids to the recovery medium after the heat treatment greatly reduces the ability to bacterial spores to recover and form colonies. This effect varies depending on chain length, unsaturated bond number of fatty acid and on the bacterial strain studied. Conclusion: The presence of free acids in the recovery media is an additive stress which decreases the capability of injured spores to germinate and grow thereafter. Significance and impact of this study: The impact of free fatty acids presented in this study can be taken into account to reduce the thermal intensity of food sterilization in relation to their availability in food matrix.
基金the Sustention of the Ministry of Education for Excellent Homecoming Researchers.
文摘This research is intended to provide academic reference and design guidance for further studies to determine the most effective means to reduce a ship’s resistance through an air-cavity. On the basis of potential theory and on the assumption of an ideal and irrotational fluid, this paper drives a method for calculating air cavity formation using slender ship theory then points out the parameters directly related to the formation of air cavities and their interrelationships. Simulations showed that the formation of an air cavity is affected by cavitation number, velocity, groove geometry and groove size. When the ship’s velocity and groove structure are given, the cavitation number must be within range to form a steady air cavity. The interface between air and water forms a wave shape and could be adjusted by an air injection system.
文摘To protect humans, devices and maintain high reliability of electrical equipments, efficient earthing system has to be provided for residential and commercial buildings. The use of chemical elements around the electrode of earthing systems reduces the earth resistance which improves the efficiency of these systems. However, the use of these elements can’t achieve very small earth resistance especially in the case of dry clay. In addition, they are expensive and not available all the time. This paper presents a method that treats the soil with adding the Dead Sea water instead of the chemical elements to further reduce the earth resistance and to avoid the expenses of these elements. In our approach, the Dead Sea water is added to a hole around the electrode with a distance not exceeding 10 cm to avoid the corrosion layer on the electrode. Practical measurements are demonstrated to show the efficiency of the proposed approach.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB921801)the National Natural Science Foundation of China(Grant No.111374348)
文摘Lateral resistance of silicon-based p-type and n-type Schottky junctions is investigated. After one electrode on a metallic film is irradiated, the differential lateral resistance of the system is dependent on the direction of the bias current:it keeps constant in one direction and decreases in the opposite direction. By systematically investigating the electrical potential changes in silicon and the junction, we propose a new mechanism based on light-controlled leak current. Our work provides an insight into the nature of this phenomenon and will facilitate the advanced design of switchable devices.
基金sup port provided by the Key Project of Ministry of Edu-cation of P.R.China(Grant No.02089)the National Key Grant Program of Basic Research De-velopment(Grant No.2002CCA01200).
文摘The tangent resistance on the interface of the soil-moldboard is an important component of the resistance to moving soil . We developed simplified mechanical models to analyze this resistance. We found that it is composed of two components, the frictional and adhesive resistances. These two components originate from the soil pore, which induced a capillary suction effect, and the soil-moldboard contact area produced tangent adhesive resistance. These two components varied differently with soil moisture. Thus we predicted that resistance reduction against soil exerted on the non-smooth bionic moldboard is mainly due to the elimination of capillary suction and the reduction of physical-chemical adsorption of soil.
基金supported by the National Natural Science Foundation of China(No.52075249)the foundation of Jiangsu Provincial Key Laboratory of Bionic Functional Materials,China.The authors thank Xipeng WANG and Tingwei HUO in Nanjing University of Aeronautics and Astronautics,China,for help in the AFM and LEXT experiments.
文摘The crawling process of snakes is known to have fascinating tribological phenomena,whereas investigations on their frictional properties depending on patterned cuticles are insufficient.In this study,we have designed and fabricated biomimetic microstructures inspired by the geometric microunits of Achalinus spinalis cuticle using polyurethane acrylate(PUA)material and performed its tribological analysis.The micro-morphology of this Achalinus-inspired textured polymer surface(AITPS)is characterized by the closely and evenly quasi-rectangular microgrooves,periodically arranged along certain orientations.We have compared the frictional performance of our fabricated AITPS with other competitive microstructure,using a smooth steel ball and commercial clay as an interacting surface.After performing massive friction tests with steel ball and clay,AITPS still maintains good resistance reduction performed compared to the patterned surface with straight microgrooves,which is most likely due to the reduction of actual contact areas at the frictional interface.
基金supported by the Key R&D Projects of the Sichuan Provincial Department of Science and Technology in 2022 (No.2022YFS0457)Innovation and Entrepreneurship Training Program for College Students (No.202210649050).
文摘Thermal alkaline hydrolysis is a common pretreatment method for the utilization of excess activated sludge(EAS).Owing to strict environment laws and need for better energy utilization,new methods were developed in this study to improve the efficiency of pretreatment method.Direct thermal hydrolysis(TH),pasteurized thermal hydrolysis(PTH),and alkaline pasteurized thermal hydrolysis(PTH+CaO and PTH+NaOH)methods were used to treat EAS.Each method was compared and analyzed in terms of dissolution in ammonium nitrogen(NH_(4)^(+)-N)and soluble COD(SCOD)in EAS.Furthermore,the removal of tetracycline resistance genes(TRGs)and class 1 transposon gene intI1 from EAS was investigated.The NH_(4)^(+)-N and SCOD concentrations in EAS treated by PTH were 1.24 and 2.58 times higher than those of TH.However,the removal efficiency of total TRGs and intI1 between the groups was comparable.The SCOD concentration of the PTH+NaOH group was 4.37 times higher than that of the PTH group,and the removal efficiency of total TRGs was increased by 9.52%compared with that by PTH.The NH_(4)^(+)-N and SCOD concentrations of the PTH+CaO group could reach 85.04%and 92.14%of the PTH+NaOH group,but the removal efficiency of total TRGs by PTH+CaO was 19.78%lower than that by PTH+NaOH.Thus,to reduce the financial cost in actual operation,lime(CaO)can be used instead of a strong alkali(NaOH),and pasteurized steam at 70℃ instead of conventional high-temperature heating to treat EAS.This study provides a reference for the development of alkaline hydrolysis under moderate temperatures along with the removal of TRGs in EAS.
基金the Science and Technology Key Project of Anhui Province,China(No.2022e03020004).
文摘Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.
文摘Antibiotic resistance poses a significant global health threat, necessitating a thorough understanding of its prevalence in various ecological contexts. Medicinal plants, renowned for their therapeutic properties, host endophytic bacteria that produce bioactive compounds. Understanding antibiotic resistance dynamics in these bacteria is vital for human health and antibiotic efficacy preservation. In this study, we investigated antibiotic resistance profiles in endophytic bacteria from five medicinal plants: Thankuni, Neem, Aparajita, Joba, and Snake plant. We isolated and characterized 113 endophytic bacteria, with varying resistance patterns observed against multiple antibiotics. Notably, 53 strains were multidrug-resistant (MDR), with 14 exhibiting extensive drug resistance (XDR). Thankuni-associated bacteria displayed 44% MDR and 11% XDR, while Neem-associated bacteria showed higher resistance (60% MDR, 13% XDR). Aparajita-associated bacteria had lower resistance (22% MDR, 6% XDR), whereas Joba-associated bacteria exhibited substantial resistance (54% MDR, 14% XDR). Snake plant-associated bacteria showed 7% MDR and 4% XDR. Genus-specific distribution revealed Bacillus (47%), Staphylococcus (21%), and Klebsiella (11%) as major contributors to MDR. Our findings highlight diverse drug resistance patterns among plant-associated bacteria and underscore the complexity of antibiotic resistance dynamics in diverse plant environments. Identification of XDR strains emphasizes the severity of the antibiotic resistance problem, warranting further investigation into contributing factors.
基金suppoited by an Alexander Graliam Bell Canada Graduate Scholarship-Doctoralsupported by an Ontario Graduate Scholarshipsupported by the Canada Research Chairs programme。
文摘Purpose:The aim of this umbrella review was to determine the impact of resistance training(RT)and individual RT prescription variables on muscle mass,strength,and physical function in healthy adults.Methods:Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses(PRISMA)guidelines,we systematically searched and screened eligible systematic reviews reporting the effects of differing RT prescription variables on muscle mass(or its proxies),strength,and/or physical function in healthy adults aged>18 years.Results:We identified 44 systematic reviews that met our inclusion criteria.The methodological quality of these reviews was assessed using A Measurement Tool to Assess Systematic Reviews;standardized effectiveness statements were generated.We found that RT was consistently a potent stimulus for increasing skeletal muscle mass(4/4 reviews provide some or sufficient evidence),strength(4/6 reviews provided some or sufficient evidence),and physical function(1/1 review provided some evidence).RT load(6/8 reviews provided some or sufficient evidence),weekly frequency(2/4 reviews provided some or sufficient evidence),volume(3/7 reviews provided some or sufficient evidence),and exercise order(1/1 review provided some evidence)impacted RT-induced increases in muscular strength.We discovered that 2/3 reviews provided some or sufficient evidence that RT volume and contraction velocity influenced skeletal muscle mass,while 4/7 reviews provided insufficient evidence in favor of RT load impacting skeletal muscle mass.There was insufficient evidence to conclude that time of day,periodization,inter-set rest,set configuration,set end point,contraction velocity/time under tension,or exercise order(only pertaining to hypertrophy)influenced skeletal muscle adaptations.A paucity of data limited insights into the impact of RT prescription variables on physical function.Conclusion:Overall,RT increased muscle mass,strength,and physical function compared to no exercise.RT intensity(load)and weekly frequency impacted RT-induced increases in muscular strength but not muscle hypertrophy.RT volume(number of sets)influenced muscular strength and hypertrophy.
基金supported by the National Natural Science Foundation of China (22178149)Jiangsu Distinguished Professor Program+4 种基金Natural Science Foundation of Jiangsu Province for Outstanding Youth Scientists (BK20211599)Key R and D Project of Zhenjiang City (CQ2022001)Scientific Research Startup Foundation of Jiangsu University (Nos. 202096 and 22JDG020)Open Project Program of the State Key Laboratory of Photocatalysis on Energy and Environment of Fuzhou University (SKLPEE-KF202310)the Opening Project of Structural Optimization and Application of Functional Molecules Key Laboratory of Sichuan Province (2023GNFZ-01)。
文摘Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO_(2), Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C_(2+) compounds through C–C coupling process. Herein, the basic principles of photocatalytic CO_(2) reduction reactions(PCO_(2)RR) and electrocatalytic CO_(2) reduction reaction(ECO_(2)RR) and the pathways for the generation C_(2+) products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO_(2)RR and ECO_(2)RR is emphasized. Through a review of recent studies on PCO_(2)RR and ECO_(2)RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C_(2+) products. Finally, the opportunities and challenges associated with Cu-based materials in the CO_(2) catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO_(2) reduction processes in the future.
文摘The authors regret to report a mistake in the text and an associated change necessary to section 3.6 of the paper.On page 1766 in the right-hand column,line 4,the heading of subsection 3.6“GmWRKY40 represses the expression of PR genes”should be changed to“GmWRKY40 promotes the expression of PR genes”.The authors would like to apologize for any inconvenience caused.
文摘In Africa, each year, there are estimated to be more than 91 million cases of salmonellosis and 137,000 cases of death. The problem of antibiotic resistance in Salmonella strains is a threat to public health. The objective of this study is to evaluate the antibiotic resistance profile of Salmonella strains isolated in biological products analyzed at the National Laboratory of Clinical Biology and Public Health (NLCBPH) in Bangui. This is, therefore, a cross-sectional study with a descriptive aim, running from January to December 2022. It focused on the strains of Salmonella isolated and identified in stools, urines, and blood samples. For each strain of Salmonella isolated, an antibiogram was carried out following the recommendations of the French Society of Microbiology (CASFM, 2022). A total of 93 strains of Salmonella have been recorded. The age group 0 - 9 years was 29% and that of >50 years was 11%. The median age of patients was 30 years with a minimum of 1 and a maximum of 78 years. The female gender was more represented at 52.69% than the male gender at 47.31%, i.e. a sex ratio of 0.89 (M/F). Salmonella strains were much more isolated in stools at 62% followed by urines at 29% and blood at 6%. Salmonella arizonae strains were more represented with 52%. Salmonella strains have a resistance rate to Tetracycline of 62.37% followed by Penicillins of 50%. The rate of multi-antibiotic resistance of the Salmonella strains isolated represented 48.38%. Salmonella spp. strains were multi-resistant at 58.69% followed by Salmonella arizonae strains at 47.91%. There is a significant association between the different families of antibiotics and Salmonella strains (p < 0.05). According to the results obtained, Penicillins, Phenicoles, and Cyclins had a high rate of resistance on Salmonella strains. No strain-producing Broad Spectrum Beta-lactamase has been isolated. Salmonella strains represent a zoonotic health danger, constitute a public health problem and remain a current subject. This germ is resistant to the antibiotics used. It is, therefore, essential to emphasize monitoring the resistance of these germs in the Central African Republic (CAR) to improve the health of the population.
基金supported by the National Key Research and Development Program of China(2022YFF0710505)The Central Public-interest Scientific Institution Basal Research Fund,China(1610302022001)the Talents Introduction Projects of Hebei Agricultural University,China(YJ201945)。
文摘Oxazolidinones are highly effective antimicrobial agents for the treatment of serious infections caused by Gram-positive organisms,including methicillin-resistant Staphylococcus aureus(MRSA),vancomycin-resistant enterococci(VRE),multidrug-resistant(MDR)pneumococci and MDR mycobacteria(Brenciani et al.2022).However,the emergence and prevalence of acquired oxazolidinone resistance genes.
文摘The accessibility of tetracycline resistance gene (tetG) into the pores of activated carbon (AC), as well as the impact of the pore size distribution (PSD) of AC on the uptake capacity of tetG, were investigated using eight types of AC (four coal-based and four wood-based). AC showed the capability to admit tetG and the average reduction of tetG for coal-based and wood-based ACs at the AC dose of 1 g·L<sup>-1</sup> was 3.12 log and 3.65 log, respectively. The uptake kinetic analysis showed that the uptake of the gene followed the pseudo-second-order kinetics reaction, and the uptake rate constant for the coal-based and wood-based ACs was in the range of 5.97 × 10<sup>-12</sup> - 4.64 × 10<sup>-9</sup> and 7.02 × 10<sup>-11</sup> - 1.59 × 10<sup>-8</sup> copies·mg<sup>-1</sup>·min<sup>-1</sup>, respectively. The uptake capacity analysis by fitting the obtained experiment data with the Freundlich isotherm model indicated that the uptake constant (K<sub>F</sub>) values were 1.71 × 10<sup>3</sup> - 8.00 × 10<sup>9</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for coal-based ACs and 7.00 × 10<sup>8</sup> - 3.00 × 10<sup>10</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for wood-based ones. In addition, the correlation analysis between K<sub>F</sub> values and pore volume as well as pore surface at different pore size regions of ACs showed that relatively higher positive correlation was found for pores of 50 - 100 Å, suggesting ACs with more pores in this size region can uptake more tetG. The findings of this study are valuable as reference for optimizing the adsorption process regarding antibiotic resistance-related concerns in drinking water treatment.
文摘Background: Antifungal resistance (AFR) is a global public health problem with devastating effects, especially among immunocompromised individuals. Addressing AFR requires a One Health approach including Antifungal Stewardship (AFS). This study aimed to comprehensively review global studies published on fungal infections and AFR and to recommend solutions to address this growing problem. Materials and Methods: This was a narrative review that was conducted using published papers on fungal infections, AFR, and AFS between January 1961 and March 2024. The literature was searched using PubMed, Google Scholar, Web of Science, and EMBASE. Results: This found that there has been an increase in fungal infections globally, especially among immunocompromised patients. Due to this increase in fungal infections, there has been a proportionate increase in the use of antifungal agents to prevent and treat fungal infections. This increased use of antifungal agents has worsened the problem of AFR contributing to increased morbidity and mortality. Globally, fungal infections have contributed to 150 million infections annually and 1.7 million deaths per year. By the year 2023, over 3.8 million people died from fungal infections. Addressing AFR remains a challenge because the treatment of antifungal-resistant infections is difficult. Finally, the treatment of fungal infections is a global challenge exacerbated by the limited number of antifungal agents to treat invasive fungal infections. Conclusion: The results of this study indicated that fungal infections and AFR are prevalent across humans, animals, agriculture, and the environment. Addressing this problem requires the provision of solutions such as improving the awareness of AFR, conducting further research on the discovery of new antifungal agents, and implementing AFS programs. If this global problem is not addressed, the morbidity and mortality associated with AFR will continue to rise in the future.
文摘Attribute reduction is a research hotspot in rough set theory. Traditional heuristic attribute reduction methods add the most important attribute to the decision attribute set each time, resulting in multiple redundant attribute calculations, high time consumption, and low reduction efficiency. In this paper, based on the idea of sequential three-branch decision classification domain, attributes are treated as objects of three-branch division, and attributes are divided into core attributes, relatively necessary attributes, and unnecessary attributes using attribute importance and thresholds. Core attributes are added to the decision attribute set, unnecessary attributes are rejected from being added, and relatively necessary attributes are repeatedly divided until the reduction result is obtained. Experiments were conducted on 8 groups of UCI datasets, and the results show that, compared to traditional reduction methods, the method proposed in this paper can effectively reduce time consumption while ensuring classification performance.
基金supported by National Natural Science Foundation of China (Nos.12002384, U2341277,and 52025064)Foundation Strengthening Program (No.2021JJ-0786)。
文摘To improve the cruise flight performance of aircraft, two new configurations of plasma actuators(grid-type and super-dense array) were investigated to reduce the turbulent skin friction drag of a low-speed airfoil. The induced jet characteristics of the two actuators in quiescent air were diagnosed with high-speed particle image velocimetry(PIV), and their drag reduction efficiencies were examined under different operating conditions in a wind tunnel. The results showed that the grid-type plasma actuator was capable of producing a wall-normal jet array(peak magnitude: 1.07 m/s) similar to that generated in a micro-blowing technique, while the superdense array plasma actuator created a wavy wall-parallel jet(magnitude: 0.94 m/s) due to the discrete spanwise electrostatic forces. Under a comparable electrical power consumption level,the super-dense array plasma actuator array significantly outperformed the grid-type configuration,reducing the total airfoil friction drag by approximately 22% at a free-stream velocity of 20 m/s.The magnitude of drag reduction was proportional to the dimensionless jet velocity ratio(r), and a threshold r = 0.014 existed under which little impact on airfoil drag could be discerned.
基金financially supported by the Natural Science Foundation of Shandong Province (ZR2020QB132,ZR2020MB025)the Opening Project of State Key Laboratory of High Performance Ceramics and Superfine Microstructure (SKL202108SIC)the Taishan Scholar Program of Shandong Province (ts201712046)。
文摘Combination of CO_(2) capture using inorganic alkali with subsequently electrochemical conversion of the resultant HCO_(3)^(-)to high-value chemicals is a promising route of low cost and high efficiency.The electrochemical reduction of HCO_(3)^(-)is challenging due to the inaccessible of negatively charged molecular groups to the electrode surface.Herein,we adopt a comprehensive strategy to tackle this challenge,i.e.,cascade of in situ chemical conversion of HCO_(3)^(-)to CO_(2) and CO_(2) electrochemical reduction in a flow cell.With a tailored Ni-N-S single atom catalyst(SACs),where sulfur(S)atoms located in the second shell of Ni center,the CO_(2)electroreduction(CO_(2)ER)to CO is boosted.The experimental results and density functional theory(DFT)calculations reveal that the introduction of S increases the p electron density of N atoms near Ni atom,thereby stabilizing^(*)H over N and boosting the first proton coupled electron transfer process of CO_(2)ER,i.e.,^(*)+e^(-)+^(*)H+^(*)CO_(2)→^(*)COOH.As a result,the obtained catalyst exhibits a high faradaic efficiency(FE_(CO)~98%)and a low overpotential of 425 mV for CO production as well as a superior turnover frequency(TOF)of 47397 h^(-1),outcompeting most of the reported Ni SACs.More importantly,an extremely high FECOof 90%is achieved at 50 mA cm^(-2)in the designed membrane electrode assembly(MEA)cascade electrolyzer fed with liquid bicarbonate.This work not only highlights the significant role of the second coordination on the first coordination shell of the central metal for CO_(2)ER,but also provides an alternative and feasible strategy to realize the electrochemical conversion of HCO_(3)^(-)to high-value chemicals.