In order to clarify the role of organic matter in the enrichment of base metal, 10 samples of the Permian Kupferschiefer from southwestern Poland were analyzed by using microscopic and geochemical methods. The results...In order to clarify the role of organic matter in the enrichment of base metal, 10 samples of the Permian Kupferschiefer from southwestern Poland were analyzed by using microscopic and geochemical methods. The results indicate that the solvent extracts have been depleted in the samples with high Cu, Pb, Zn contents. This depletion occurred preferably in saturated hydrocarbons. Saturated hydrocarbons served as hydrogen donor for thermochemical sulfate reduction (TSR). The GC traces of saturated hydrocarbon show that the depletion occurred mainly in long chain n alkanes.展开更多
Gas Hure Oilfield is the biggest one in the Qaidam Basin. Through intensive sampling and GC-MS a- nalysis, the authors analyzed the geochemical characteristics of the crude oils in the Gas Hure Oilfield. The re- sults...Gas Hure Oilfield is the biggest one in the Qaidam Basin. Through intensive sampling and GC-MS a- nalysis, the authors analyzed the geochemical characteristics of the crude oils in the Gas Hure Oilfield. The re- sults show that the crude oils have even-odd carbon predominance for n-alkanes. In shallow reservoir, part of crude oils suffered biogenic degradation. As for normal oils, they have low Pr/Ph ratios with abundant gammac- erane and C35 homohopane, which indicate that the crude oils are formed in strong reducing salt water environ- ment. Compared deep （ E~ ） reservoir with shallow （ N1 - N2^1 ） reservoir, the ancient salinity of sedimentary en- vironment of Nj-N1 crude oils is slightly higher than that of E3^1crude oils; the C21-/C22＋ ratios of crude oils are 1.02-1.71 with a higher abundance of C27sterane, which shows that their mainly origin matrix are bacteria and algae; the C29 sterane 20S/（20S ＋ 20R）is generally low, the ratio in deep E3^1 reservoir distributes between 0.31 and 0. 40, but in shallow reservoir is relatively low with 0. 29-0. 36. At the same time, C29sterane αββ（αββ ＋ααα） and Ts/Tm both are extremely lower. All the above show that the crude oils in Gas Hure are mainly low mature oils, although the maturity of deep reservoir crude oils is slightly higher than shallow one.展开更多
The saturated hydrocarbon fraction of a heavily biodegraded crude oil from Liaohe oilfield was analyzed by using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×...The saturated hydrocarbon fraction of a heavily biodegraded crude oil from Liaohe oilfield was analyzed by using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×GC-TOFMS). The "humps", which was termed as unresolved complex mixtures (UCMs) in conventional gas chromatographic analysis, was separated for identification of the individual compound. Main compounds of UCMs were identified according to the combined information of characteristics of GC×GC chromatogram and time-of-flight mass spectra. It's found that UCMs are mainly composed of great number of ring compounds with extremely low concentration. The ring compounds are separated according to their boiling point diversity in the first dimension column, then to their polarity or ring number variety in the second dimension column. In the sample there are two groups of UCMs, i.e., the first group compounds with boiling point lower that of C24 and the second group compounds with boiling point higher than that of C24. The first group of UCMs mainly consists of monocyclic, bicyclic and tricyclic ring compounds. The first group of UCMs is mainly composed of saturated hydrocarbons, in which the percentage of ring compounds with signal-to-noise ratio above 100 is about 75% of the total quantity of saturated hydrocarbon, while its mass is over 80% of the total saturated hydrocarbon. The second group of UCMs is mainly composed of tetracyclic and pentacyclic ring compounds, in which the percentage of UCM compounds with signal-to-noise ratio over 100 is about 17% of the total quantity of saturated hydrocarbon, and its mass is about 0.5% of the total saturated hydrocarbon. The results of this study are helpful for heavy oil developing and genesis mechanism understanding.展开更多
Despite the upsurge in hydrocarbon exploration in the Lake Albert Rift Basin(LARB)over the past three decades,systematic characterization of hydrocarbon compositions remains lacking,leading to uncertainties in source ...Despite the upsurge in hydrocarbon exploration in the Lake Albert Rift Basin(LARB)over the past three decades,systematic characterization of hydrocarbon compositions remains lacking,leading to uncertainties in source rock and oil generation determination.We characterized crude oil compositions and oil sand samples in the northern and southern subbasins of LARB.The relative abundance of normal and branched linear alkanes,hopanes,steranes,and aromatic hydrocarbon suggest that northern and southern hydrocarbons were deposited in anoxic to suboxic lacustrine environments and share similar biological source compositions(i.e.,a mixture of plants and aquatic algae and bacteria).Relative to southern samples,northern samples show more negative δ^(13)C values for oils,saturates and aromatics,indicating longer migration paths,and exhibit higher MPI-1,DNR-1 and 4-/1-MDBT ratios,indicating higher maturity.Between the two possible sets of source rocks(upper Miocene and Jurassic strata),the positive δ^(13)C values of saturated hydrocarbons(average=-20.5‰)suggest that the upper Miocene lacustrine shale is the most likely candidate.Oleanane index(<5% in our samples)does not exclude either source rock possibility,and C_(28)/C_(29) regular sterane(average=0.63)may be biased by high terrestrial inputs in a lacustrine setting.Together,our data show that northern and southern oils originate from the same source rocks but different oil kitchens.Given the similar geochemical characteristics of southern and northern oils,previous exploration successes in the northern subbasin likely suggest similar potential in the southern sector,while other elements influencing exploration success must be also evaluated.展开更多
Abstract: Previous studies have shown that the oxidizing brines from the Early Permian Rotliegende sequence have influences on the organic matter of Kupferschiefer. However, inside the Rotliegende sequence there are t...Abstract: Previous studies have shown that the oxidizing brines from the Early Permian Rotliegende sequence have influences on the organic matter of Kupferschiefer. However, inside the Rotliegende sequence there are two other black shales: the Lower and Upper Antracosia shales, which have not been studied as much in detail as in Kupferschiefer. In the present study 12 samples from the Lower and Upper Antracosia shales were analyzed by organic geochemical methods in order to clarify the influences of the oxidizing brines on organic matter. The results indicate that the organic matter of the samples from the Upper Antracosia shale and the bottom of the Lower Antracosia shale was oxidized under the influences of the oxidizing brines. The oxidation resulted in a depletion of saturated hydrocarbons and the alkyls of the aromatic compounds.展开更多
Integrated modelling, well correlation and petrophysical analysis were performed to characterize the reservoirs for optimum hydrocarbon correlation using 3-D seismic reflection data and suites of well logs from Ataga ...Integrated modelling, well correlation and petrophysical analysis were performed to characterize the reservoirs for optimum hydrocarbon correlation using 3-D seismic reflection data and suites of well logs from Ataga 5, 7, 10 and 11 wells respectively in Ataga field, shallow offshore, Niger Delta Basin, Nigeria. The study revealed the presence of two viable hydrocarbon bearing reservoirs, AT1 and AT2 and the average values of porosity, permeability, water saturation, hydrocarbon saturation, Net to Gross (NTG) and volume of shale are in the ranges of 15% - 77%, 44.5% - 75.5%, 25.5% - 85%, 15% - 75.5%, 0.70 - 0.88 and 0.11 - 0.38 respectively which goes further to show that the both reservoirs have fair characteristics that are suggestive of the presence of hydrocarbon accumulation. It can therefore be deduced that the permeability values are reflective of fair interconnectivity of pore spaces of sands within the well areas and their ability to transmit fluids, the depth and depth structural map generated for the horizons and structures shows that the most dominant trapping mechanism in the area under study is the crescentic growth fault and the rollover anticlines trending in the Northwest-Southeast direction and from the volumetric analysis. It can be deduced that the recoverable gas for AT1 and AT2 reservoirs is 2 × 10<sup>6</sup> mscf and 6 × 10<sup>6</sup> mscf respectively.展开更多
In recent years,oil spill accidents occur frequently in the marine area of China.Finding out the spilled oil source is a key step in the relevant investigation.In this paper,a step-by-step fingerprinting identificatio...In recent years,oil spill accidents occur frequently in the marine area of China.Finding out the spilled oil source is a key step in the relevant investigation.In this paper,a step-by-step fingerprinting identification method was used in a spilled oil accident in the Bohai Sea in 2002.Advanced chemical fingerprinting and data interpretation techniques were used to characterize the chemical composition and determine the possible sources of two spilled oil samples.The original gas chromatography -flame ionization detec-tion (GC-FID) chromatogram of saturated hydrocarbons was compared.The gas chromatography-mass spectrometry (GC/MS) chromatograms of aromatic hydrocarbons terpane and sterane,n-alkane and poly-aromatic hydrocarbons (PAHs) were analyzed.The correlation analysis on diagnostic ratios was performed with Student’s t-test.It is found that the oil fingerprinting of the spilled oil (designated as sz1) from the polluted sand beach was identical with the suspected oil (designated as ky1) from a nearby crude oil refinery factory.They both showed the fingerprinting character of mixed oil.The oil fingerprinting of the spilled oil (designated as ms1) collected from the port was significantly different from oil ky1 and oil sz1 and was with a lubricating oil fingerprint character.The identification result not only gave support for the spilled oil investigation,but also served as an example for studying spilled oil accidents.展开更多
This paper proposed a topological index S which combined the graph feature and chemical surroundings. It can reflect the essential properties of chemical compounds better. The capacity of distinguishing structural iso...This paper proposed a topological index S which combined the graph feature and chemical surroundings. It can reflect the essential properties of chemical compounds better. The capacity of distinguishing structural isomers of saturated hydrocarbons is high.展开更多
Recently the LTAG technology combining selective hydro-saturation of LCO with selective catalytic cracking technology for producing high-octane gasoline or light aromatic hydrocarbons has passed technical appraisal.
Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomiti...Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomitic limestones interbedded with thin to medium layers of yellowish-gray marl (calcareous mudstone). The current study shows that the average shale volume in the Sarmord and Garage formations is between 16% and 20%. In Atrush-1 Well, the average porosity ratio of the Sarmord and Garagu formations is fair to good (15% and 11%, respectively). However, in Mangesh-1 Well, the porosity value is poor;it is around 4% on average. Generally, most of the hydrocarbons that have been observed within the pore spaces are residual oil type in Atrush-1 Well and movable hydrocarbon type in Mangesh-1 Well. In Atrush-1 Well, out of 362 m thickness of both formations, only 180 m is considered to be a pay zone;whereas, the pay zone is just around 8.0 m thick out of 347 m of the total thickness. According to the calculated porosity values, the Garagu and Sarmord formations are not considered as good reservoirs in the studied wells, with the exception of Atrush-1 Well where the Sarmord Formation has fair potential reservoir characteristics.展开更多
An analytical method for quantifying biomarker compounds of the sterane and the hopane existing in saturated hydrocarbons has been established by using comprehensive two-dimensional gas chromatography-flame ionization...An analytical method for quantifying biomarker compounds of the sterane and the hopane existing in saturated hydrocarbons has been established by using comprehensive two-dimensional gas chromatography-flame ionization detector(GC×GC-FID) with optimized operating parameters. The new method achieves the quantification by using a GC×GC-FID system which is able to completely separate steranes from hopanes. The data obtained by the new method are of good repeatability and reliability. Compared with the original data, the relative standard deviations(RSDs) of 12 reference compounds are less than 5%. The RSDs of the quantitative results of the biomarkers based on seven separate analyses are also less than 5%. Compared with the traditional method of gas chromatography-mass spectrometry(GC-MS), the new method has a number of advantages, such as common internal standards(ISs), high resolution, no co-eluting peak, and no interference caused by diagnostic ion peaks. The new method provides petroleum geologists with an effective and scientific means in future researches.展开更多
Seismic fluid identification works as an effective approach to characterize the fluid feature and distribution of the reservoir underground with seismic data. Rock physics which builds bridge between the elastic param...Seismic fluid identification works as an effective approach to characterize the fluid feature and distribution of the reservoir underground with seismic data. Rock physics which builds bridge between the elastic parameters and reservoir parameters sets the foundation of seismic fluid identification, which is also a hot topic on the study of quantitative characterization of oil/gas reservoirs. Study on seismic fluid identification driven by rock physics has proved to be rewarding in recognizing the fluid feature and distributed regularity of the oil/gas reservoirs. This paper summarizes the key scientific problems immersed in seismic fluid identification, and emphatically reviews the main progress of seismic fluid identification driven by rock physics domestic and overseas, as well as discusses the opportunities, challenges and future research direction related to seismic fluid identification. Theoretical study and practical application indicate that we should incorporate rock physics, numerical simulation, seismic data processing and seismic inversion together to enhance the precision of seismic fluid identification.展开更多
文摘In order to clarify the role of organic matter in the enrichment of base metal, 10 samples of the Permian Kupferschiefer from southwestern Poland were analyzed by using microscopic and geochemical methods. The results indicate that the solvent extracts have been depleted in the samples with high Cu, Pb, Zn contents. This depletion occurred preferably in saturated hydrocarbons. Saturated hydrocarbons served as hydrogen donor for thermochemical sulfate reduction (TSR). The GC traces of saturated hydrocarbon show that the depletion occurred mainly in long chain n alkanes.
基金Supported by the National Natural Science Foundation of China (No. 40973041)
文摘Gas Hure Oilfield is the biggest one in the Qaidam Basin. Through intensive sampling and GC-MS a- nalysis, the authors analyzed the geochemical characteristics of the crude oils in the Gas Hure Oilfield. The re- sults show that the crude oils have even-odd carbon predominance for n-alkanes. In shallow reservoir, part of crude oils suffered biogenic degradation. As for normal oils, they have low Pr/Ph ratios with abundant gammac- erane and C35 homohopane, which indicate that the crude oils are formed in strong reducing salt water environ- ment. Compared deep （ E~ ） reservoir with shallow （ N1 - N2^1 ） reservoir, the ancient salinity of sedimentary en- vironment of Nj-N1 crude oils is slightly higher than that of E3^1crude oils; the C21-/C22＋ ratios of crude oils are 1.02-1.71 with a higher abundance of C27sterane, which shows that their mainly origin matrix are bacteria and algae; the C29 sterane 20S/（20S ＋ 20R）is generally low, the ratio in deep E3^1 reservoir distributes between 0.31 and 0. 40, but in shallow reservoir is relatively low with 0. 29-0. 36. At the same time, C29sterane αββ（αββ ＋ααα） and Ts/Tm both are extremely lower. All the above show that the crude oils in Gas Hure are mainly low mature oils, although the maturity of deep reservoir crude oils is slightly higher than shallow one.
文摘The saturated hydrocarbon fraction of a heavily biodegraded crude oil from Liaohe oilfield was analyzed by using comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×GC-TOFMS). The "humps", which was termed as unresolved complex mixtures (UCMs) in conventional gas chromatographic analysis, was separated for identification of the individual compound. Main compounds of UCMs were identified according to the combined information of characteristics of GC×GC chromatogram and time-of-flight mass spectra. It's found that UCMs are mainly composed of great number of ring compounds with extremely low concentration. The ring compounds are separated according to their boiling point diversity in the first dimension column, then to their polarity or ring number variety in the second dimension column. In the sample there are two groups of UCMs, i.e., the first group compounds with boiling point lower that of C24 and the second group compounds with boiling point higher than that of C24. The first group of UCMs mainly consists of monocyclic, bicyclic and tricyclic ring compounds. The first group of UCMs is mainly composed of saturated hydrocarbons, in which the percentage of ring compounds with signal-to-noise ratio above 100 is about 75% of the total quantity of saturated hydrocarbon, while its mass is over 80% of the total saturated hydrocarbon. The second group of UCMs is mainly composed of tetracyclic and pentacyclic ring compounds, in which the percentage of UCM compounds with signal-to-noise ratio over 100 is about 17% of the total quantity of saturated hydrocarbon, and its mass is about 0.5% of the total saturated hydrocarbon. The results of this study are helpful for heavy oil developing and genesis mechanism understanding.
基金funded by National Natural Science Foundation of China(Grant No.42072149)support of US National Science Foundation grant(Grant No.EAR-1255724)。
文摘Despite the upsurge in hydrocarbon exploration in the Lake Albert Rift Basin(LARB)over the past three decades,systematic characterization of hydrocarbon compositions remains lacking,leading to uncertainties in source rock and oil generation determination.We characterized crude oil compositions and oil sand samples in the northern and southern subbasins of LARB.The relative abundance of normal and branched linear alkanes,hopanes,steranes,and aromatic hydrocarbon suggest that northern and southern hydrocarbons were deposited in anoxic to suboxic lacustrine environments and share similar biological source compositions(i.e.,a mixture of plants and aquatic algae and bacteria).Relative to southern samples,northern samples show more negative δ^(13)C values for oils,saturates and aromatics,indicating longer migration paths,and exhibit higher MPI-1,DNR-1 and 4-/1-MDBT ratios,indicating higher maturity.Between the two possible sets of source rocks(upper Miocene and Jurassic strata),the positive δ^(13)C values of saturated hydrocarbons(average=-20.5‰)suggest that the upper Miocene lacustrine shale is the most likely candidate.Oleanane index(<5% in our samples)does not exclude either source rock possibility,and C_(28)/C_(29) regular sterane(average=0.63)may be biased by high terrestrial inputs in a lacustrine setting.Together,our data show that northern and southern oils originate from the same source rocks but different oil kitchens.Given the similar geochemical characteristics of southern and northern oils,previous exploration successes in the northern subbasin likely suggest similar potential in the southern sector,while other elements influencing exploration success must be also evaluated.
文摘Abstract: Previous studies have shown that the oxidizing brines from the Early Permian Rotliegende sequence have influences on the organic matter of Kupferschiefer. However, inside the Rotliegende sequence there are two other black shales: the Lower and Upper Antracosia shales, which have not been studied as much in detail as in Kupferschiefer. In the present study 12 samples from the Lower and Upper Antracosia shales were analyzed by organic geochemical methods in order to clarify the influences of the oxidizing brines on organic matter. The results indicate that the organic matter of the samples from the Upper Antracosia shale and the bottom of the Lower Antracosia shale was oxidized under the influences of the oxidizing brines. The oxidation resulted in a depletion of saturated hydrocarbons and the alkyls of the aromatic compounds.
文摘Integrated modelling, well correlation and petrophysical analysis were performed to characterize the reservoirs for optimum hydrocarbon correlation using 3-D seismic reflection data and suites of well logs from Ataga 5, 7, 10 and 11 wells respectively in Ataga field, shallow offshore, Niger Delta Basin, Nigeria. The study revealed the presence of two viable hydrocarbon bearing reservoirs, AT1 and AT2 and the average values of porosity, permeability, water saturation, hydrocarbon saturation, Net to Gross (NTG) and volume of shale are in the ranges of 15% - 77%, 44.5% - 75.5%, 25.5% - 85%, 15% - 75.5%, 0.70 - 0.88 and 0.11 - 0.38 respectively which goes further to show that the both reservoirs have fair characteristics that are suggestive of the presence of hydrocarbon accumulation. It can therefore be deduced that the permeability values are reflective of fair interconnectivity of pore spaces of sands within the well areas and their ability to transmit fluids, the depth and depth structural map generated for the horizons and structures shows that the most dominant trapping mechanism in the area under study is the crescentic growth fault and the rollover anticlines trending in the Northwest-Southeast direction and from the volumetric analysis. It can be deduced that the recoverable gas for AT1 and AT2 reservoirs is 2 × 10<sup>6</sup> mscf and 6 × 10<sup>6</sup> mscf respectively.
文摘In recent years,oil spill accidents occur frequently in the marine area of China.Finding out the spilled oil source is a key step in the relevant investigation.In this paper,a step-by-step fingerprinting identification method was used in a spilled oil accident in the Bohai Sea in 2002.Advanced chemical fingerprinting and data interpretation techniques were used to characterize the chemical composition and determine the possible sources of two spilled oil samples.The original gas chromatography -flame ionization detec-tion (GC-FID) chromatogram of saturated hydrocarbons was compared.The gas chromatography-mass spectrometry (GC/MS) chromatograms of aromatic hydrocarbons terpane and sterane,n-alkane and poly-aromatic hydrocarbons (PAHs) were analyzed.The correlation analysis on diagnostic ratios was performed with Student’s t-test.It is found that the oil fingerprinting of the spilled oil (designated as sz1) from the polluted sand beach was identical with the suspected oil (designated as ky1) from a nearby crude oil refinery factory.They both showed the fingerprinting character of mixed oil.The oil fingerprinting of the spilled oil (designated as ms1) collected from the port was significantly different from oil ky1 and oil sz1 and was with a lubricating oil fingerprint character.The identification result not only gave support for the spilled oil investigation,but also served as an example for studying spilled oil accidents.
文摘This paper proposed a topological index S which combined the graph feature and chemical surroundings. It can reflect the essential properties of chemical compounds better. The capacity of distinguishing structural isomers of saturated hydrocarbons is high.
文摘Recently the LTAG technology combining selective hydro-saturation of LCO with selective catalytic cracking technology for producing high-octane gasoline or light aromatic hydrocarbons has passed technical appraisal.
文摘Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomitic limestones interbedded with thin to medium layers of yellowish-gray marl (calcareous mudstone). The current study shows that the average shale volume in the Sarmord and Garage formations is between 16% and 20%. In Atrush-1 Well, the average porosity ratio of the Sarmord and Garagu formations is fair to good (15% and 11%, respectively). However, in Mangesh-1 Well, the porosity value is poor;it is around 4% on average. Generally, most of the hydrocarbons that have been observed within the pore spaces are residual oil type in Atrush-1 Well and movable hydrocarbon type in Mangesh-1 Well. In Atrush-1 Well, out of 362 m thickness of both formations, only 180 m is considered to be a pay zone;whereas, the pay zone is just around 8.0 m thick out of 347 m of the total thickness. According to the calculated porosity values, the Garagu and Sarmord formations are not considered as good reservoirs in the studied wells, with the exception of Atrush-1 Well where the Sarmord Formation has fair potential reservoir characteristics.
文摘An analytical method for quantifying biomarker compounds of the sterane and the hopane existing in saturated hydrocarbons has been established by using comprehensive two-dimensional gas chromatography-flame ionization detector(GC×GC-FID) with optimized operating parameters. The new method achieves the quantification by using a GC×GC-FID system which is able to completely separate steranes from hopanes. The data obtained by the new method are of good repeatability and reliability. Compared with the original data, the relative standard deviations(RSDs) of 12 reference compounds are less than 5%. The RSDs of the quantitative results of the biomarkers based on seven separate analyses are also less than 5%. Compared with the traditional method of gas chromatography-mass spectrometry(GC-MS), the new method has a number of advantages, such as common internal standards(ISs), high resolution, no co-eluting peak, and no interference caused by diagnostic ion peaks. The new method provides petroleum geologists with an effective and scientific means in future researches.
基金supported by the National Basic Research Program of China(Grant No.2013CB228604)the National Grand Project for Science and Technology(Grant Nos.2011ZX05030-004-002,2011ZX05019-003,2011ZX05006-002)SINOPEC Key Laboratory of Geophysics+2 种基金Science Foundation for Post-doctoral Scientists of ChinaScience Foundation for Post-doctoral Scientists of Shandongthe Western Australian Energy Research Alliance(WA:ERA)
文摘Seismic fluid identification works as an effective approach to characterize the fluid feature and distribution of the reservoir underground with seismic data. Rock physics which builds bridge between the elastic parameters and reservoir parameters sets the foundation of seismic fluid identification, which is also a hot topic on the study of quantitative characterization of oil/gas reservoirs. Study on seismic fluid identification driven by rock physics has proved to be rewarding in recognizing the fluid feature and distributed regularity of the oil/gas reservoirs. This paper summarizes the key scientific problems immersed in seismic fluid identification, and emphatically reviews the main progress of seismic fluid identification driven by rock physics domestic and overseas, as well as discusses the opportunities, challenges and future research direction related to seismic fluid identification. Theoretical study and practical application indicate that we should incorporate rock physics, numerical simulation, seismic data processing and seismic inversion together to enhance the precision of seismic fluid identification.
