Poly(lithium propionate methyl siloxane )as a single-ion carrier source was synthesized. The crosslinked film showed lower lithium ionic conductivity at room temperature (about 10^(-10) S/cm). However,the lithium ioni...Poly(lithium propionate methyl siloxane )as a single-ion carrier source was synthesized. The crosslinked film showed lower lithium ionic conductivity at room temperature (about 10^(-10) S/cm). However,the lithium ionic conductivity was obviously increased by blending with high polar polymers such as polyethylene oxide, poly (methylsiloxane - co- ethylene oxide) and poly (methylsiloxane- g- ethylene oxide). In the blend system a high conductivity of 10^(-7)-10^(-5) Scm^(-1) at room temperature was obtained and the single-ion conductivity was deeply influenced by the content of the poly (lithium propionate methyl siioxane). The dc ionic conductivity of the flexible crosslinked films is more stable over time.展开更多
Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）,...Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）, 1,6-hexanediol （HDO）, dimethylol propionic acid （DMPA） and triethylamine （TEA）. Based on butyl acrylate （BA）, 2, 2, 2-trifluoroethylmethacrylate （TFEMA） and Si-PU as a seed emulsion, a novel core-shell type acrylic-polyurethane hybrid emulsion, containing siloxane and fluorine （F-Si-PU）, was prepared by seeded emulsion polymerization. The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the chain structures of Si-PU and F-Si-PU. Investigation of transmission electron microscopy （TEM） confirmed the core-shell structure of F-Si-PU emulsion. Measurement results of water contact angle and the swelling ratio in water and n-octane for cured film showed that the water and the oil resistances for F-Si-PU had been significantly improved at a suitable content of fluorine and siloxane.展开更多
Acrylate latex modified by vinyl triisopropoxy silane (C-1706) was synthesized by seeded emulsion polymerization with anionic emulsifier sodium dodecyl sulphonate(SDS) and nonionic emulsifier OP-10 as the multiple emu...Acrylate latex modified by vinyl triisopropoxy silane (C-1706) was synthesized by seeded emulsion polymerization with anionic emulsifier sodium dodecyl sulphonate(SDS) and nonionic emulsifier OP-10 as the multiple emulsifiers at (78±2) ℃. The effects of different factors, such as the emulsifier, C-1706 monomer and its feeding manner on the properties of acrylate latex modified by C-1706 were investigated. The particle size distribution and the structure, the configuration, the weather durability and stain resistance of copolymer latex were characterized by particle size analyzer, Fourier transform infrared spectroscopy (FT-IR), transmission electron microscope(TEM), scanning electron microscope(SEM) and ultraviolet aging instrument respectively. The results show that SDS to OP-10 as multiple emulsifiers can lead to coordinated efficiency, the optimal emulsifier dosage is 2.4%?3.2%(mass fraction), and the mass ratio of SDS to OP-10 is 1?1? 1?2. The seeded emulsion polymerization can effectively introduce a organic-siloxane bonding in a macromolecule inter polymer, and the obtained acrylate latex modified by organic-siloxane possesses narrow distribution of particle size with mean diameter of 51.8?76.6 nm and has the excellent properties in weather durability and stain-resistance especially.展开更多
Biogas can be used as an alternative energy source for producing heat and electricity;however, volatile methylsiloxanes(VOSiC) present in biogas can severely damage heat exchangers, turbines and gas engines. Consequen...Biogas can be used as an alternative energy source for producing heat and electricity;however, volatile methylsiloxanes(VOSiC) present in biogas can severely damage heat exchangers, turbines and gas engines. Consequently, e cient removal of VOSiC from biogas that is used as a biofuel is required. In this work, acetylated silica gel(Ac@SG) was synthesized,via treatment of microporous silica gel(SG) with acetic anhydride as an adsorbent, for removal of VOSiC from biogas,and characterized with XRD, SEM–EDS, N2-BET and FT-IR. This Ac@SG adsorbent exhibited a meso-/microporous structure and hydrophobic surface, indicating it was a more e cient adsorbent for removing hexamethyldisiloxane(L2) and octamethylcyclotetrasiloxane(D4) from biogas samples than conventional SG. It was found that the adsorption capacities of Ac@SG reached 304 mg L2/g for hexamethyldisiloxane and 916 mg D4/g for octamethylcyclotetrasiloxane at lower temperatures in the experimental range, and water had no significant e ect on its absorption e ciency. The used Ac@SG could be easily regenerated by heating it at 110 °C, and the adsorption capacity of recycled Ac@SG for hexamethyldisiloxane and octamethylcyclotetrasiloxane was kept constant in four recycle adsorption experiments.展开更多
In order to inhibit and remove the thin ice and extend the lifetime of the damaged bridge, the self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane (ASP) were studied by ...In order to inhibit and remove the thin ice and extend the lifetime of the damaged bridge, the self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane (ASP) were studied by dynamic shear rheology (DSR), fluorescence microscope (FM), atomic force microscope (AFM), the fracture-healing-re-fracture test and molecular simulations. The experimental results indicated that the selfhealing capability of ASP increased with increasing heating time and temperature. Furthermore, the addition of siloxane could improve the reaction energy barrier and complex modulus, and it is believed that the self-healing is a viscosity driven process, consisting of two parts namely crack closure and properties recovery. Contact angle of ASP increased with the increasing siloxane content and it deduced that the siloxane could improve the hydrophobic performance of ASP and the ASP molecule model could simulate well the self-healing mechanism and hydrophobic performance of ASP.展开更多
Poly[(methylsilylene ethynylene phenylene ethynylene)-co-(tetramethyldisiloxane ethynylene phenylene ethynylene)]was synthesized by polycondensation reaction of m-diethynylbenzene magnesium reagent with 1,3-dichlorote...Poly[(methylsilylene ethynylene phenylene ethynylene)-co-(tetramethyldisiloxane ethynylene phenylene ethynylene)]was synthesized by polycondensation reaction of m-diethynylbenzene magnesium reagent with 1,3-dichlorotetramethyldisiloxane and dichloromethylsilane.The copolymer was characterized by FT-IR,~1H NMR,differential scanning calorimetry and thermogravimetric analysis.The results show that the copolymer exhibits good processability and cures at low temperatures.The cured copolymer shows high thermal stability.展开更多
Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynami...Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynamic mechanical property analysis. The results showedthat the introduction of chloromethyl group into polysiloxane increased its polarity and henceimproved the miscibilities with polytetramethylene oxide and polyurethane hard segment.Particularly, in the case of N-methyldiethanolamine extended materials, the surface and tensileproperties of these samples can be adjusted by various ratios of two soft segments.展开更多
A homogeneous longtime stabilized transparent nanometer TiO2 organic solution was obtained by means of the simultaneous hydrolysis and co-polycodensation of tetrabutyltitanate (TBT) and methacryloxypropyltrimethoxysil...A homogeneous longtime stabilized transparent nanometer TiO2 organic solution was obtained by means of the simultaneous hydrolysis and co-polycodensation of tetrabutyltitanate (TBT) and methacryloxypropyltrimethoxysilane (MAPTMS) by the sol-gel process. The particle size of nanometer titanium dioxide was controlled by use of bifunctional silanes, such as diphenyldimethoxysilane (DPDMS), diphenyldiethoxysilane (DPDES) and dimethyldiethoxysilane (DMDES). The effect of TiO2 content in the solution on the refractive index of system was discussed in detail. The result shows that the refractive index of solution increases linearly with TiO2 content. The refractive index of the three hybrid nanometer materials attained 1.6053, 1.5846 and 1.5346, respectively. The size of nanometer particles was characterized by TEM and the particle diameter thus obtained is in the range of 20-90 nm. FT-IR spectra of the materials show that the Ti— O—Si bond is formed.展开更多
Porous and bioactive gentamicin sulfate-loaded gelatin-siloxane hybrids were successfidly synthesized by using a combined sol-gel processing, post-gelation soaking, and freeze-drying process. A bone-like apatite layer...Porous and bioactive gentamicin sulfate-loaded gelatin-siloxane hybrids were successfidly synthesized by using a combined sol-gel processing, post-gelation soaking, and freeze-drying process. A bone-like apatite layer was able to form in the Ca^2＋-containing porous gentamicin-loaded hybrids upon soaking in a simu- lazed body fluid （SBF） up to 1 day. The drug release of gentamicin sulfate was with a burst, followed by an almost constant release up to 7 days. And the rate of release in acidic medium was lower than that in the neutral and basic media.展开更多
Poly(methyl methacrylate) (PMMA) was used to wrap alumina siloxane sol through emulsion polymerization. A kind of suspensions with notable ER effect was produced by fully mixing the prepared microcapsule with silicon...Poly(methyl methacrylate) (PMMA) was used to wrap alumina siloxane sol through emulsion polymerization. A kind of suspensions with notable ER effect was produced by fully mixing the prepared microcapsule with silicon oil. Meanwhile a series of PMMA wrapped alumina-siloxane gel doped with rare earths was obtained and its ER effect was tested, like viscosity of different rare earth ion doped samples in different powder concentrations and at different temperatures, at the same time, leak current density and dielectric constant were measured. Results show that the ER effect of this suspension is remarkable, and its stability is much better. The condition of emulsion polymerization and the mechanism of effect are discussed.展开更多
A hybrimer based on epoxy resin and phenyl-siloxane was prepared by polymerization and a solgel condensation reaction in which Eporite-904 (807 g/eq) bisphenol-A-type epoxy resin, 3-isocyanatopropyltriethoxysilane (IP...A hybrimer based on epoxy resin and phenyl-siloxane was prepared by polymerization and a solgel condensation reaction in which Eporite-904 (807 g/eq) bisphenol-A-type epoxy resin, 3-isocyanatopropyltriethoxysilane (IPTES) and phenyltriethoxysilane (PTEOS) acted as precursors. The thermal and optical properties of the epoxy/siloxane hybrimer were studied. The thermogravimetric analysis (TGA) results implied that the hybrimer could increase the crosslink density and enhance the thermal properties. The optical properties were measured after thermal and UV aging. The refractive indexes of the epoxy/siloxane hybrimers were 1.66 - 1.70, and the transmittances of the cured hybrimers were above 90% in the visible wavelength. After a 120°C/24-h thermal aging test, the decreases in the refractive index and transmittance were less than 5% and 20% respectively. The epoxy/siloxane hybrimers also showed low discoloration upon thermal aging at 120°C for 24 h under an air atmosphere.展开更多
A compound,3-ethyl-3-hydroxymethyloxetane(EHO),was synthesized with diethyl carbonate and trihydroxypropane as raw materials,3-ethyl-3-allylmethoxy oxetane(EAMO)was synthesized with EHO and allyl bromide,and 1,1,3,3,5...A compound,3-ethyl-3-hydroxymethyloxetane(EHO),was synthesized with diethyl carbonate and trihydroxypropane as raw materials,3-ethyl-3-allylmethoxy oxetane(EAMO)was synthesized with EHO and allyl bromide,and 1,1,3,3,5,5-hexamethyl-1,5-bis[(3-ethyl-3-methoxyoxetane)propyl]trisiloxane(HMBEMOPTS)was synthesized with EAMO and 1,1,3,3,5,5-hexamethyltrisiloxane(HMTS).HMBEMOPTS is a novel UV-curable oligomer.The test of photo-DSC shows the photosensitivity of HMBEMOPTS is better than the ordinary oxetane,3-ethyl-3-[(3-ethyloxetan-3-yl)methoxymethyl]oxetane.HMBEMOPTS was mixed with bisphenol A type epoxy resin E-51 to prepare a cationic UV-curable system,and triarylsulfonium hexafluoroantimonate(UV-6976)was used as a cationic photoinitiator.The mechanical tests of coating films prove that when the mass fraction of HMBEMOPTS is 50%,the mechanical properties of the curing system are the best.The impact strength of the UV-curable films is measured to be 40 kg·cm and the flexibility is 2 mm;the tensile strength and flexural strength of the prepared specimens are 20.74 MPa and 13.43 MPa,respectively.The experimental results show that HMBEMOPTS can effectively improve photosensitivity and flexibility of the photosensitive resin.展开更多
PMMA wrapped alumina siloxane gel was obtained by using poly (methyl methacrylate) (PMMA) to wrap alumina siloxane sol which was made from water glass, aluminum nitrate and α methacrylic acid. Meanwhile, rare eart...PMMA wrapped alumina siloxane gel was obtained by using poly (methyl methacrylate) (PMMA) to wrap alumina siloxane sol which was made from water glass, aluminum nitrate and α methacrylic acid. Meanwhile, rare earth ions were used to dope in the course of reaction, and stable suspensions was produced by putting PMMA wrapped microcapsule powder doped with rare earths into methy silicon oil. It is found that its electrorheological (ER) effect improves strikingly after loading electric field. At a certain concentration, the immediate viscosity increases from 95 to 178 Pa·s compared to the system without doping.展开更多
A valid experimental setup was proposed to study the wave transfer in PDMS fluids. It is found that the degree of attenuation in strain rate is greater with the increasing fluid viscosity, increasing vibration frequen...A valid experimental setup was proposed to study the wave transfer in PDMS fluids. It is found that the degree of attenuation in strain rate is greater with the increasing fluid viscosity, increasing vibration frequency, and increasing wave traveled distance.展开更多
Silk fibers were grafted with a novel vinyl siloxane monomer. The properties of silk with different grafting yield were discussed. The results showed that the crease recovery of grafted silk fabric is improved signifi...Silk fibers were grafted with a novel vinyl siloxane monomer. The properties of silk with different grafting yield were discussed. The results showed that the crease recovery of grafted silk fabric is improved significantly, handle of grafted silk is softer, and grafting has no influence on strength of silk. Graft with low grafting yield has no effect on dyeing properties of silk. The results of IR, SEM photographs and amino acid analysis indicate that the monomer combines with silk fiber by physical sediment and chemical bond, the grafting reactions mainly occurred on Ser., His. and Arg. of silk fibers, and ester crosslinking forms between silanol and Asp., Gin. of silk molecular side chains. X-ray diffraction patterns of silk fibers suggest that the grafting has no effect on the crystalline regions.展开更多
Polymer coated quartz crystal microbalance (QCM) sensor based on the frequency shifts due to the adsorption of compounds at the surface of modified quartz crystal electrode is an effective method for detection of sari...Polymer coated quartz crystal microbalance (QCM) sensor based on the frequency shifts due to the adsorption of compounds at the surface of modified quartz crystal electrode is an effective method for detection of sarin (GB) which is a highly toxic nerve warfare agent. A new fluorosiloxane polymer has been synthesized through 6 steps from trifluoromethyl benzene. The synthesis was achieved from trifluoromethyl benzene through nitration, hydrogenation. The obtained m-nitrotrifluoromethyl aniline was treated with NaNO2, and then hydrolyzed to m-nitrotrifluoromethyl phenol. m-nitrotrifluoromethyl phenol was reacted with allyl bromide to the ether product. The product was rearranged by Claisen rearrangement, and then reacted with polymethylhydrosiloxane under catalyst of Pt/DVTMS. The fluorosiloxane polymer can be obtained. The polymer has been successfully used as QCM coating material.展开更多
The inevitable ion migration that occurs within ionic polycrystalline perovskite film results in inferior longterm stability of perovskite solar cells(PVSCs)that cannot meet the commercial requirements.Here,a novel po...The inevitable ion migration that occurs within ionic polycrystalline perovskite film results in inferior longterm stability of perovskite solar cells(PVSCs)that cannot meet the commercial requirements.Here,a novel poly(ionic liquid)named poly-1-vinyl-3-propyltrimethoxysilane imidazolium chloride(PImIL-SiO)is first introduced into perovskite to strengthen grain boundaries(GBs)and construct dual-functional barriers against internal ion migration and external moisture erosion for fabricating highly efficient and stable PVSCs.PImIL-SiO-containing imidazoliumcations and pendant siloxane groups contribute to passivation of bulk defects and anchoring of GBs,which effectively hinders ion migration channels,thus reducing perovskite film phase separation and device hysteresis.Furthermore,the intrinsically hydrophobic PImIL-SiO automatically forms a secondary protective barrier to endow the perovskite film with ultrahigh moisture corrosion resistance through the hydrolyzation reaction of siloxane with the permeated moisture.Consequently,the PImIL-SiO-modified PVSCs achieve a champion power conversion efficiency(PCE)of 22.46%,accompaniedby excellent thermal andhumidity stabilities where the non-encapsulated devices retain 87%of the initial PCE after aging at 85℃for 250 h and>85%of the initial PCE over 1100 h in air with a relative humidity of 50–70%.展开更多
With the tactful material design,skillful device engineering,and in-depth understanding of morphology optimization,organic solar cells (OSCs) have achieved considerable success.Therefore,OSCs have reached high power c...With the tactful material design,skillful device engineering,and in-depth understanding of morphology optimization,organic solar cells (OSCs) have achieved considerable success.Therefore,OSCs have reached high power conversion efficiencies (PCEs) exceeding 19%.Especially,continuously emerging new materials have been considered as one of the key factors to improve the PCEs of OSCs.Among molecular design strategies,side-chain engineering is an easy and commonly-used means which can optimize the solubility,alter intermolecular stacking arrangement,fine-tune the open circuit voltage (VOC),thus ultimately improve the performance.As hybrid side chains,silane and siloxane side chains have considerable effects,not only in increasing the carrier mobility and tuning the energy level,but also in affecting the crystallinity and molecular orientation.In this review,the latest developments in photovoltaic materials based on silane and siloxane side chains are presented to illustrate the structure-property relationships.The review comprehensively includes silane-side based polymer/small molecule donors;siloxane-side based polymer/small molecule donors,and polymer/small molecule acceptors.Then the similarities and differences between these two side chains are demonstrated.Finally,the possible applications and future prospects of silane and siloxane side chains are presented.展开更多
Lithium(Li)metal anode holds great promise for high-energy-density rechargeable batteries.However,it suffers from the Li dendrites growth and uncontrollable side reactions with electrolyte due to the unstable solid el...Lithium(Li)metal anode holds great promise for high-energy-density rechargeable batteries.However,it suffers from the Li dendrites growth and uncontrollable side reactions with electrolyte due to the unstable solid electrolyte interphase(SEI)layer.Herein,we propose a facile strategy for the in-situ fabricate of organic-inorganic composite artificial SEI layers on Li surfaces,which consist of organic fluorinated siloxane and inorganic LiF-rich phases.The hybrid artificial SEI endows high mechanical strength(13.1 GPa)and Liþtransfer number(0.62).Such robust SEI protective layers can not only guide uniform nucleation and deposition of Li metal by facilitating uniform Li-ion distribution,but also prevent unfavourable side reactions.Accordingly,the protected metallic lithium anode(PMTFPS-Li)anode enables stable Li plating/stripping performance in symmetric cells for more than 300 h at 4 mA$h/cm^(2)under a high areal capacity of 4 mA/cm^(2).Moreover,the PMTFPS-Li/S cells could maintain more than 300 stable cycles at 0.5C and the PMTFPS-Li/LFP cells present excellent cycling performance(400 cycles at 1C)and enhanced rate capability(110.4 mA$h/g at 3 C).This work will inspire the design of artificial SEI on Li anodes for advanced Li metal batteries.展开更多
The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synth...The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synthesized from diethyl carbonate,trimethylopropanes,allyl bromide,and 1,1,3,3,5,5,7,7-octadecylosiloxane as the main raw materials.BEMOPOMTS can be used as reactive diluents in the field of cationic UV curing.It has good thermal stability,and the addition of BEMOPOMTS significantly improves the tensile strength and elongation at break of epoxy resin.Compared with the pure epoxy resin,adding 20%BEMOPOMTS increased the elastic modulus by 25%to 677 MPa.展开更多
基金This work was supported by the National Natural Science Foundation of China
文摘Poly(lithium propionate methyl siloxane )as a single-ion carrier source was synthesized. The crosslinked film showed lower lithium ionic conductivity at room temperature (about 10^(-10) S/cm). However,the lithium ionic conductivity was obviously increased by blending with high polar polymers such as polyethylene oxide, poly (methylsiloxane - co- ethylene oxide) and poly (methylsiloxane- g- ethylene oxide). In the blend system a high conductivity of 10^(-7)-10^(-5) Scm^(-1) at room temperature was obtained and the single-ion conductivity was deeply influenced by the content of the poly (lithium propionate methyl siioxane). The dc ionic conductivity of the flexible crosslinked films is more stable over time.
基金Financial supports from the National Natural Science Foundation of China(No.50273035)Hangzhou Zhijiang Silicone Chemical Industry Co.,Ltd.are acknowledged.
文摘Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）, 1,6-hexanediol （HDO）, dimethylol propionic acid （DMPA） and triethylamine （TEA）. Based on butyl acrylate （BA）, 2, 2, 2-trifluoroethylmethacrylate （TFEMA） and Si-PU as a seed emulsion, a novel core-shell type acrylic-polyurethane hybrid emulsion, containing siloxane and fluorine （F-Si-PU）, was prepared by seeded emulsion polymerization. The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the chain structures of Si-PU and F-Si-PU. Investigation of transmission electron microscopy （TEM） confirmed the core-shell structure of F-Si-PU emulsion. Measurement results of water contact angle and the swelling ratio in water and n-octane for cured film showed that the water and the oil resistances for F-Si-PU had been significantly improved at a suitable content of fluorine and siloxane.
基金Project(2003B10506) supported by Science and Technology Department of Guangdong Province, China
文摘Acrylate latex modified by vinyl triisopropoxy silane (C-1706) was synthesized by seeded emulsion polymerization with anionic emulsifier sodium dodecyl sulphonate(SDS) and nonionic emulsifier OP-10 as the multiple emulsifiers at (78±2) ℃. The effects of different factors, such as the emulsifier, C-1706 monomer and its feeding manner on the properties of acrylate latex modified by C-1706 were investigated. The particle size distribution and the structure, the configuration, the weather durability and stain resistance of copolymer latex were characterized by particle size analyzer, Fourier transform infrared spectroscopy (FT-IR), transmission electron microscope(TEM), scanning electron microscope(SEM) and ultraviolet aging instrument respectively. The results show that SDS to OP-10 as multiple emulsifiers can lead to coordinated efficiency, the optimal emulsifier dosage is 2.4%?3.2%(mass fraction), and the mass ratio of SDS to OP-10 is 1?1? 1?2. The seeded emulsion polymerization can effectively introduce a organic-siloxane bonding in a macromolecule inter polymer, and the obtained acrylate latex modified by organic-siloxane possesses narrow distribution of particle size with mean diameter of 51.8?76.6 nm and has the excellent properties in weather durability and stain-resistance especially.
基金financial support from the National Natural Science Foundation of China (21677046)the Natural Science Foundation of Hebei Province (B2017205146)
文摘Biogas can be used as an alternative energy source for producing heat and electricity;however, volatile methylsiloxanes(VOSiC) present in biogas can severely damage heat exchangers, turbines and gas engines. Consequently, e cient removal of VOSiC from biogas that is used as a biofuel is required. In this work, acetylated silica gel(Ac@SG) was synthesized,via treatment of microporous silica gel(SG) with acetic anhydride as an adsorbent, for removal of VOSiC from biogas,and characterized with XRD, SEM–EDS, N2-BET and FT-IR. This Ac@SG adsorbent exhibited a meso-/microporous structure and hydrophobic surface, indicating it was a more e cient adsorbent for removing hexamethyldisiloxane(L2) and octamethylcyclotetrasiloxane(D4) from biogas samples than conventional SG. It was found that the adsorption capacities of Ac@SG reached 304 mg L2/g for hexamethyldisiloxane and 916 mg D4/g for octamethylcyclotetrasiloxane at lower temperatures in the experimental range, and water had no significant e ect on its absorption e ciency. The used Ac@SG could be easily regenerated by heating it at 110 °C, and the adsorption capacity of recycled Ac@SG for hexamethyldisiloxane and octamethylcyclotetrasiloxane was kept constant in four recycle adsorption experiments.
基金Funded by the National Natural Science Foundation of China(No.51808329)Science and Technology Department of Shanxi Province International Cooperation(No.201603D421027)the Special Project of Commercialization of Shanxi Province Research Foundation(No.201804D131034)
文摘In order to inhibit and remove the thin ice and extend the lifetime of the damaged bridge, the self-healing mechanism and hydrophobic performance of asphalt modified by siloxane and polyurethane (ASP) were studied by dynamic shear rheology (DSR), fluorescence microscope (FM), atomic force microscope (AFM), the fracture-healing-re-fracture test and molecular simulations. The experimental results indicated that the selfhealing capability of ASP increased with increasing heating time and temperature. Furthermore, the addition of siloxane could improve the reaction energy barrier and complex modulus, and it is believed that the self-healing is a viscosity driven process, consisting of two parts namely crack closure and properties recovery. Contact angle of ASP increased with the increasing siloxane content and it deduced that the siloxane could improve the hydrophobic performance of ASP and the ASP molecule model could simulate well the self-healing mechanism and hydrophobic performance of ASP.
基金support of the National High Technology Research and Development Program of China(No.2002305205)the National Basic Research Program of China(No.51320006)
文摘Poly[(methylsilylene ethynylene phenylene ethynylene)-co-(tetramethyldisiloxane ethynylene phenylene ethynylene)]was synthesized by polycondensation reaction of m-diethynylbenzene magnesium reagent with 1,3-dichlorotetramethyldisiloxane and dichloromethylsilane.The copolymer was characterized by FT-IR,~1H NMR,differential scanning calorimetry and thermogravimetric analysis.The results show that the copolymer exhibits good processability and cures at low temperatures.The cured copolymer shows high thermal stability.
文摘Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynamic mechanical property analysis. The results showedthat the introduction of chloromethyl group into polysiloxane increased its polarity and henceimproved the miscibilities with polytetramethylene oxide and polyurethane hard segment.Particularly, in the case of N-methyldiethanolamine extended materials, the surface and tensileproperties of these samples can be adjusted by various ratios of two soft segments.
基金This work was financially supported by the Education Department of Hubei Province (2000Z24002).
文摘A homogeneous longtime stabilized transparent nanometer TiO2 organic solution was obtained by means of the simultaneous hydrolysis and co-polycodensation of tetrabutyltitanate (TBT) and methacryloxypropyltrimethoxysilane (MAPTMS) by the sol-gel process. The particle size of nanometer titanium dioxide was controlled by use of bifunctional silanes, such as diphenyldimethoxysilane (DPDMS), diphenyldiethoxysilane (DPDES) and dimethyldiethoxysilane (DMDES). The effect of TiO2 content in the solution on the refractive index of system was discussed in detail. The result shows that the refractive index of solution increases linearly with TiO2 content. The refractive index of the three hybrid nanometer materials attained 1.6053, 1.5846 and 1.5346, respectively. The size of nanometer particles was characterized by TEM and the particle diameter thus obtained is in the range of 20-90 nm. FT-IR spectra of the materials show that the Ti— O—Si bond is formed.
文摘Porous and bioactive gentamicin sulfate-loaded gelatin-siloxane hybrids were successfidly synthesized by using a combined sol-gel processing, post-gelation soaking, and freeze-drying process. A bone-like apatite layer was able to form in the Ca^2＋-containing porous gentamicin-loaded hybrids upon soaking in a simu- lazed body fluid （SBF） up to 1 day. The drug release of gentamicin sulfate was with a burst, followed by an almost constant release up to 7 days. And the rate of release in acidic medium was lower than that in the neutral and basic media.
文摘Poly(methyl methacrylate) (PMMA) was used to wrap alumina siloxane sol through emulsion polymerization. A kind of suspensions with notable ER effect was produced by fully mixing the prepared microcapsule with silicon oil. Meanwhile a series of PMMA wrapped alumina-siloxane gel doped with rare earths was obtained and its ER effect was tested, like viscosity of different rare earth ion doped samples in different powder concentrations and at different temperatures, at the same time, leak current density and dielectric constant were measured. Results show that the ER effect of this suspension is remarkable, and its stability is much better. The condition of emulsion polymerization and the mechanism of effect are discussed.
文摘A hybrimer based on epoxy resin and phenyl-siloxane was prepared by polymerization and a solgel condensation reaction in which Eporite-904 (807 g/eq) bisphenol-A-type epoxy resin, 3-isocyanatopropyltriethoxysilane (IPTES) and phenyltriethoxysilane (PTEOS) acted as precursors. The thermal and optical properties of the epoxy/siloxane hybrimer were studied. The thermogravimetric analysis (TGA) results implied that the hybrimer could increase the crosslink density and enhance the thermal properties. The optical properties were measured after thermal and UV aging. The refractive indexes of the epoxy/siloxane hybrimers were 1.66 - 1.70, and the transmittances of the cured hybrimers were above 90% in the visible wavelength. After a 120°C/24-h thermal aging test, the decreases in the refractive index and transmittance were less than 5% and 20% respectively. The epoxy/siloxane hybrimers also showed low discoloration upon thermal aging at 120°C for 24 h under an air atmosphere.
基金Funded by the National Natural Science Foundation of China(No.21865017)。
文摘A compound,3-ethyl-3-hydroxymethyloxetane(EHO),was synthesized with diethyl carbonate and trihydroxypropane as raw materials,3-ethyl-3-allylmethoxy oxetane(EAMO)was synthesized with EHO and allyl bromide,and 1,1,3,3,5,5-hexamethyl-1,5-bis[(3-ethyl-3-methoxyoxetane)propyl]trisiloxane(HMBEMOPTS)was synthesized with EAMO and 1,1,3,3,5,5-hexamethyltrisiloxane(HMTS).HMBEMOPTS is a novel UV-curable oligomer.The test of photo-DSC shows the photosensitivity of HMBEMOPTS is better than the ordinary oxetane,3-ethyl-3-[(3-ethyloxetan-3-yl)methoxymethyl]oxetane.HMBEMOPTS was mixed with bisphenol A type epoxy resin E-51 to prepare a cationic UV-curable system,and triarylsulfonium hexafluoroantimonate(UV-6976)was used as a cationic photoinitiator.The mechanical tests of coating films prove that when the mass fraction of HMBEMOPTS is 50%,the mechanical properties of the curing system are the best.The impact strength of the UV-curable films is measured to be 40 kg·cm and the flexibility is 2 mm;the tensile strength and flexural strength of the prepared specimens are 20.74 MPa and 13.43 MPa,respectively.The experimental results show that HMBEMOPTS can effectively improve photosensitivity and flexibility of the photosensitive resin.
文摘PMMA wrapped alumina siloxane gel was obtained by using poly (methyl methacrylate) (PMMA) to wrap alumina siloxane sol which was made from water glass, aluminum nitrate and α methacrylic acid. Meanwhile, rare earth ions were used to dope in the course of reaction, and stable suspensions was produced by putting PMMA wrapped microcapsule powder doped with rare earths into methy silicon oil. It is found that its electrorheological (ER) effect improves strikingly after loading electric field. At a certain concentration, the immediate viscosity increases from 95 to 178 Pa·s compared to the system without doping.
文摘A valid experimental setup was proposed to study the wave transfer in PDMS fluids. It is found that the degree of attenuation in strain rate is greater with the increasing fluid viscosity, increasing vibration frequency, and increasing wave traveled distance.
基金This project is supported by Natural Science Foundation of College of Jiangsu Province , China (02KJA540001)
文摘Silk fibers were grafted with a novel vinyl siloxane monomer. The properties of silk with different grafting yield were discussed. The results showed that the crease recovery of grafted silk fabric is improved significantly, handle of grafted silk is softer, and grafting has no influence on strength of silk. Graft with low grafting yield has no effect on dyeing properties of silk. The results of IR, SEM photographs and amino acid analysis indicate that the monomer combines with silk fiber by physical sediment and chemical bond, the grafting reactions mainly occurred on Ser., His. and Arg. of silk fibers, and ester crosslinking forms between silanol and Asp., Gin. of silk molecular side chains. X-ray diffraction patterns of silk fibers suggest that the grafting has no effect on the crystalline regions.
文摘Polymer coated quartz crystal microbalance (QCM) sensor based on the frequency shifts due to the adsorption of compounds at the surface of modified quartz crystal electrode is an effective method for detection of sarin (GB) which is a highly toxic nerve warfare agent. A new fluorosiloxane polymer has been synthesized through 6 steps from trifluoromethyl benzene. The synthesis was achieved from trifluoromethyl benzene through nitration, hydrogenation. The obtained m-nitrotrifluoromethyl aniline was treated with NaNO2, and then hydrolyzed to m-nitrotrifluoromethyl phenol. m-nitrotrifluoromethyl phenol was reacted with allyl bromide to the ether product. The product was rearranged by Claisen rearrangement, and then reacted with polymethylhydrosiloxane under catalyst of Pt/DVTMS. The fluorosiloxane polymer can be obtained. The polymer has been successfully used as QCM coating material.
基金supported by National Natural Science Foundation of China(NSFC)(grant nos.52063019,51973088,51833004,U20A20128).
文摘The inevitable ion migration that occurs within ionic polycrystalline perovskite film results in inferior longterm stability of perovskite solar cells(PVSCs)that cannot meet the commercial requirements.Here,a novel poly(ionic liquid)named poly-1-vinyl-3-propyltrimethoxysilane imidazolium chloride(PImIL-SiO)is first introduced into perovskite to strengthen grain boundaries(GBs)and construct dual-functional barriers against internal ion migration and external moisture erosion for fabricating highly efficient and stable PVSCs.PImIL-SiO-containing imidazoliumcations and pendant siloxane groups contribute to passivation of bulk defects and anchoring of GBs,which effectively hinders ion migration channels,thus reducing perovskite film phase separation and device hysteresis.Furthermore,the intrinsically hydrophobic PImIL-SiO automatically forms a secondary protective barrier to endow the perovskite film with ultrahigh moisture corrosion resistance through the hydrolyzation reaction of siloxane with the permeated moisture.Consequently,the PImIL-SiO-modified PVSCs achieve a champion power conversion efficiency(PCE)of 22.46%,accompaniedby excellent thermal andhumidity stabilities where the non-encapsulated devices retain 87%of the initial PCE after aging at 85℃for 250 h and>85%of the initial PCE over 1100 h in air with a relative humidity of 50–70%.
基金National Natural Science Foundation of China(52103221,52172048,22205130)Shandong Provincial Natural Science Foundation(ZR2021QB179,ZR2021QB024,ZR2021ZD06)+1 种基金Guangdong Natural Science Foundation of China(2023A1515012323,2023A1515010943,2022A1515110643)the National Key Research and Development Program of China(2022YFB4200400)funded by MOST and the Fundamental Research Funds of Shandong University.
文摘With the tactful material design,skillful device engineering,and in-depth understanding of morphology optimization,organic solar cells (OSCs) have achieved considerable success.Therefore,OSCs have reached high power conversion efficiencies (PCEs) exceeding 19%.Especially,continuously emerging new materials have been considered as one of the key factors to improve the PCEs of OSCs.Among molecular design strategies,side-chain engineering is an easy and commonly-used means which can optimize the solubility,alter intermolecular stacking arrangement,fine-tune the open circuit voltage (VOC),thus ultimately improve the performance.As hybrid side chains,silane and siloxane side chains have considerable effects,not only in increasing the carrier mobility and tuning the energy level,but also in affecting the crystallinity and molecular orientation.In this review,the latest developments in photovoltaic materials based on silane and siloxane side chains are presented to illustrate the structure-property relationships.The review comprehensively includes silane-side based polymer/small molecule donors;siloxane-side based polymer/small molecule donors,and polymer/small molecule acceptors.Then the similarities and differences between these two side chains are demonstrated.Finally,the possible applications and future prospects of silane and siloxane side chains are presented.
基金supported by the National Natural Science Foundation of China(No.21935006).
文摘Lithium(Li)metal anode holds great promise for high-energy-density rechargeable batteries.However,it suffers from the Li dendrites growth and uncontrollable side reactions with electrolyte due to the unstable solid electrolyte interphase(SEI)layer.Herein,we propose a facile strategy for the in-situ fabricate of organic-inorganic composite artificial SEI layers on Li surfaces,which consist of organic fluorinated siloxane and inorganic LiF-rich phases.The hybrid artificial SEI endows high mechanical strength(13.1 GPa)and Liþtransfer number(0.62).Such robust SEI protective layers can not only guide uniform nucleation and deposition of Li metal by facilitating uniform Li-ion distribution,but also prevent unfavourable side reactions.Accordingly,the protected metallic lithium anode(PMTFPS-Li)anode enables stable Li plating/stripping performance in symmetric cells for more than 300 h at 4 mA$h/cm^(2)under a high areal capacity of 4 mA/cm^(2).Moreover,the PMTFPS-Li/S cells could maintain more than 300 stable cycles at 0.5C and the PMTFPS-Li/LFP cells present excellent cycling performance(400 cycles at 1C)and enhanced rate capability(110.4 mA$h/g at 3 C).This work will inspire the design of artificial SEI on Li anodes for advanced Li metal batteries.
基金Funded by the National Natural Science Foundation of China(No.21865017)。
文摘The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synthesized from diethyl carbonate,trimethylopropanes,allyl bromide,and 1,1,3,3,5,5,7,7-octadecylosiloxane as the main raw materials.BEMOPOMTS can be used as reactive diluents in the field of cationic UV curing.It has good thermal stability,and the addition of BEMOPOMTS significantly improves the tensile strength and elongation at break of epoxy resin.Compared with the pure epoxy resin,adding 20%BEMOPOMTS increased the elastic modulus by 25%to 677 MPa.
