Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for a...Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for analyzing the data of N-of-1 trials.This simulation study aimed to compare two statistical methods for handling missing values of quantitative data in Bayesian N-of-1 trials.Methods:The simulated data of N-of-1 trials with different coefficients of autocorrelation,effect sizes and missing ratios are obtained by SAS 9.1 system.The missing values are filled with mean filling and regression filling respectively in the condition of different coefficients of autocorrelation,effect sizes and missing ratios by SPSS 25.0 software.Bayesian models are built to estimate the posterior means by Winbugs 14 software.Results:When the missing ratio is relatively small,e.g.5%,missing values have relatively little effect on the results.Therapeutic effects may be underestimated when the coefficient of autocorrelation increases and no filling is used.However,it may be overestimated when mean or regression filling is used,and the results after mean filling are closer to the actual effect than regression filling.In the case of moderate missing ratio,the estimated effect after mean filling is closer to the actual effect compared to regression filling.When a large missing ratio(20%)occurs,data missing can lead to significantly underestimate the effect.In this case,the estimated effect after regression filling is closer to the actual effect compared to mean filling.Conclusion:Data missing can affect the estimated therapeutic effects using Bayesian models in N-of-1 trials.The present study suggests that mean filling can be used under situation of missing ratio≤10%.Otherwise,regression filling may be preferable.展开更多
A computer simulation method for pulsed Doppler signals from vortices was pro- posed to generate simulated vortex Doppler signals under various given circumstances. The relative waveforms, such as the maximum frequenc...A computer simulation method for pulsed Doppler signals from vortices was pro- posed to generate simulated vortex Doppler signals under various given circumstances. The relative waveforms, such as the maximum frequency waveform, the mean frequency waveform and the bandwidth waveform, were obtained using the short time Fourier analysis of those simulated signals. The relations were studied between several spectrum parameters obtained from these waveforms and given simulation conditions, such as the position and the size of the sample volume, the distance between two vortices, the free stream velocity and the maximum tangent velocity of the vortex. The sensitive parameters were found to detect vortices using the pulsed Doppler techniques.展开更多
[Objective] The study aimed to research the nutrients release of ponds sediment.[Method] The sediments which from a new pond(A) and an old one (B) these analyses used to carry out indoor experiment under the anaerobic...[Objective] The study aimed to research the nutrients release of ponds sediment.[Method] The sediments which from a new pond(A) and an old one (B) these analyses used to carry out indoor experiment under the anaerobic dark condition for researching on nutrient release. The N(nitrogenous) and P(phosphorous) release were analyzed every two days.[Result] At the prophase, the N release in B was bigger than that in A, while the decline sediment release in A was gentle.[Conclusion] There was no accumulation of organic compound during the breeding time. The NH4-N was the main form of N release; and the P release was correlated with N release, while PO4-P was the main form of P release.展开更多
In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed camera was used to record the entrainment process of droplets when air bubbles were passed throu...In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed camera was used to record the entrainment process of droplets when air bubbles were passed through the water/silicone oil interface. Motion parameters of the bubbles and droplets were obtained using particle kinematic analysis software, and the entrainment rate of the droplets was calculated. It was found that the entrainment rate decreased from 29.5% to 0 when the viscosity of the silicone oil was increased from 60 mPa.s to 820 mPa.s in the case of bubbles with a 5 mm equivalent diameter passing through the water/silicone oil interface. The results indicate that in- creasing the viscosity of the silicone oil is conducive to reducing the entrainment rate. The entrainment rate increased from 0 to 136.3% in the case of silicone oil with a viscosity of 60 mPa.s when the equivalent diameter of the bubbles was increased from 3 mm to 7 ram. We there- fore conclude that small bubbles are also conductive to reducing the entrainment rate. The force analysis results for the water colmnn indicate that the entrainment rate of droplets is affected by the velocity of the bubble passing through the water/silicone oil interface and that the en- trainment rate decreases with the bubble velocity.展开更多
A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow...A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.展开更多
The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential vale...The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.展开更多
Despite the growing interest in macroscopic epidemiological models to deal with threats posed by pandemics such as COVID-19,little has been done regarding the assessment of disease spread in day-to-day life,especially...Despite the growing interest in macroscopic epidemiological models to deal with threats posed by pandemics such as COVID-19,little has been done regarding the assessment of disease spread in day-to-day life,especially within buildings such as supermarkets where people must obtain necessities at the risk of exposure to disease.Here,we propose an integrated customer shopping simulator including both shopper movement and choice behavior,using a force-based and discrete choice model,respectively.By a simple extension to the force-based model,we implement the following preventive measures currently taken by supermarkets;social distancing and one-way systems,and different customer habits,assessing them based on the average individual disease exposure and the time taken to complete shopping(shopping efficiency).Results show that maintaining social distance is an effective way to reduce exposure,but at the cost of shopping efficiency.We find that the one-way system is the optimal strategy for reducing exposure while minimizing the impact on shopping efficiency.Customers should also visit supermarkets less frequently,but buy more when they do,if they wish to minimize their exposure.We hope that this work demonstrates the potential of pedestrian dynamics simulations in assessing preventative measures during pandemics,particularly if it is validated using empirical data.展开更多
In this paper, an algorithm for simulating fluid flow and heat transfer for mold filling of shaped castings is presented. The main features of the algorithm include: 1) a simple but practical technique based on VOF me...In this paper, an algorithm for simulating fluid flow and heat transfer for mold filling of shaped castings is presented. The main features of the algorithm include: 1) a simple but practical technique based on VOF method to determine free surface, 2) an explicit scheme of enthalpy to solve the energy equation more efficiently, and 3) an effective treatment to modify the flux deviation due to pressure iteration. In order to verify these methods, well controlled experiments have been repeatedly done with both water analog and gray iron pouring experiments to record the flow patterns and temperature variations. The calculated results are in accordance with the experimental ones. For the applications, the simulated initial temperature distribution right after mold filling was used to analyse subsequent solidification and to predict shrinkage defects. Actual castings were poured and tested in a foundry plant. The reuslts show that the defects predication with considering fluid flow effects is more precise than that without considering the effects.展开更多
The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is...The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.展开更多
In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid ph...In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid phase, air, and the particulate phase, sand granules, have been treated as a continuum. By using this model, it is possible to simulate the flow and compaction behavior of sand particles during the core-shooting process. To benchmark the calculated results, the shooting process has been recorded with a digital high speed camera, and the inlet condition of sand particles has also been achieved by using the camera. The preliminary results have showed that the calculation is in agreement with the testing results.展开更多
We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of ...We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of the CNFET device and an overall chaotic circuit is pointed out. To verify the effect of temperature variation on the output dynamics of the chaotic circuit, a simulation is performed by employing the CNFET compact model of Wong et al. in HSPICE with a temperature range from -100℃ to 100℃. The obtained results with time series, frequency spectra, and bifurcation diagram from the simulation demonstrate that temperature plays a significant role in the output dynamics of the CNFET-based chaotic circuit. Thus, temperature-related issues should be taken into account while designing a high-quality chaotic generator with high stability.展开更多
A transport simulation has been done by using a i.5D time dependent transportcode to reproduce a formation of the ITB on electron temperature Profile during the long pu1seLHCD in JT-60U tokamak. The transport coeffici...A transport simulation has been done by using a i.5D time dependent transportcode to reproduce a formation of the ITB on electron temperature Profile during the long pu1seLHCD in JT-60U tokamak. The transport coefficients were assumed to reduce with a reversedmagnetic shear and the LH driven current profile was evaluated by fitting dynamic change inthe measured current profile. The gradual increase in the central electron temperature could beexplained by the change in the current profile during LHCD in the present simulation model. Theestimated LH-driven current profile by the transport code analysis shows a finite current densityat the plasma center. Analysis of transport simulation suggests some mechanisms for broadeningthe LH-driven current profile at the central region of the plasma.展开更多
The method of using dielectrophoresis （DEP） to assemble graphene between micro-electrodes has been proven to be simple and efficient. We present an optimization method for the kinetic formula of graphene DEP, and di...The method of using dielectrophoresis （DEP） to assemble graphene between micro-electrodes has been proven to be simple and efficient. We present an optimization method for the kinetic formula of graphene DEP, and discuss the simulation of the graphene assembly process based on the finite element method. The simulated results illustrate that the accelerated motion of graphene is in agreement with the distribution of the electric field squared gradient. We also conduct research on the controllable parameters of the DEP assembly such as the alternating current （AC） frequency, the shape of micro-electrodes, and the ratio of the gap between electrodes to the characteristic/geometric length of graphene （λ）. The simulations based on the Clausius-Mossotti factor reveal that both graphene velocity and direction are influenced by the AC frequency. When graphene is close to the electrodes, the shape of micro-electrodes will exert great influence on the velocity of graphene. Also, λ has a great influence on the velocity of graphene. Generally, the velocity of graphene would be greater when λ is in the range of 0.4 0.6. The study is of a theoretical guiding significance in improving the precision and efficiency of the graphene DEP assembly.展开更多
The boiler is one of the key parts of power station. Monitoring the operation of the boiler automatically, continuously and accurately is very important. In case of malfunctions, an expert system might be helpful to f...The boiler is one of the key parts of power station. Monitoring the operation of the boiler automatically, continuously and accurately is very important. In case of malfunctions, an expert system might be helpful to find the sources of faults, and thereafter will assist the operator to act correctly and to prevent the fault from further development.In this paper, a simulation study of an expert system, which can diagnose the running faults of boiler system, is conducted. Shallow and deep two-layer knowledge base structure is used in this two layers of knowledge base. So. this kind of expert system can overcome the disadvantages of the old types of expert systems, which are only able to deal with experience rules base.A simulator of power boiler is used for the research on fault diagnose expert system. This boiler simulator gives all necessary information for the diagnosis. The knowledge base of expert system is built in hierarchies, so the speed of reasoning may be invreased. After the reasoning the展开更多
Active learning can be used for optimizing and speeding up the screening phase of systematic reviews.Running simulation studies mimicking the screening process can be used to test the performance of different machine-...Active learning can be used for optimizing and speeding up the screening phase of systematic reviews.Running simulation studies mimicking the screening process can be used to test the performance of different machine-learning models or to study the impact of different training data.This paper presents an architecture design withamultiprocessing computational strategyforrunningmanysuch simulation studiesinparallel,using the ASReview Makita workflow generator and Kubernetes software for deployment with cloud technologies.We provide a technical explanation of the proposed cloud architecture and its usage.In addition to that,we conducted 1140 simulations investigating the computational time using various numbers of CPUs and RAM settings.Our analysis demonstrates the degree to which simulations can be accelerated with multiprocessing computing usage.The parallel computation strategy and the architecture design that was developed in the present paper can contribute to future research with more optimal simulation time and,at the same time,ensure the safe completion of the needed processes.展开更多
Modelling of carob batch fermentation is established basing on mass transfer balances. The modelling treats the reaction kinetics of substrate （S）, the micro-organisms （X） and the ethanol （E）. Nine models are ta...Modelling of carob batch fermentation is established basing on mass transfer balances. The modelling treats the reaction kinetics of substrate （S）, the micro-organisms （X） and the ethanol （E）. Nine models are taken from the literature to describe specific organism growth rate and specific ethanol development rate. These models treat all types of fermentation. The Phisalapbong et al. model and the Ghose and Tyagi model show the best fit of the experimental data. This affirms that the batch fermentation of carob is conducted with substrate and/or ethanol inhibition. Some simulations and relationships （X = f（S）, E = f（S）） are obtained from the Phisalaphong et al. model. Those simulations show a lot of important and useful results of carob batch fermentation process.展开更多
基金supported by the National Natural Science Foundation of China (No.81973705).
文摘Background:Missing data are frequently occurred in clinical studies.Due to the development of precision medicine,there is an increased interest in N-of-1 trial.Bayesian models are one of main statistical methods for analyzing the data of N-of-1 trials.This simulation study aimed to compare two statistical methods for handling missing values of quantitative data in Bayesian N-of-1 trials.Methods:The simulated data of N-of-1 trials with different coefficients of autocorrelation,effect sizes and missing ratios are obtained by SAS 9.1 system.The missing values are filled with mean filling and regression filling respectively in the condition of different coefficients of autocorrelation,effect sizes and missing ratios by SPSS 25.0 software.Bayesian models are built to estimate the posterior means by Winbugs 14 software.Results:When the missing ratio is relatively small,e.g.5%,missing values have relatively little effect on the results.Therapeutic effects may be underestimated when the coefficient of autocorrelation increases and no filling is used.However,it may be overestimated when mean or regression filling is used,and the results after mean filling are closer to the actual effect than regression filling.In the case of moderate missing ratio,the estimated effect after mean filling is closer to the actual effect compared to regression filling.When a large missing ratio(20%)occurs,data missing can lead to significantly underestimate the effect.In this case,the estimated effect after regression filling is closer to the actual effect compared to mean filling.Conclusion:Data missing can affect the estimated therapeutic effects using Bayesian models in N-of-1 trials.The present study suggests that mean filling can be used under situation of missing ratio≤10%.Otherwise,regression filling may be preferable.
基金This work is supported by the Outstanding Young Teacher Funds of Chinese Ministry of Education.
文摘A computer simulation method for pulsed Doppler signals from vortices was pro- posed to generate simulated vortex Doppler signals under various given circumstances. The relative waveforms, such as the maximum frequency waveform, the mean frequency waveform and the bandwidth waveform, were obtained using the short time Fourier analysis of those simulated signals. The relations were studied between several spectrum parameters obtained from these waveforms and given simulation conditions, such as the position and the size of the sample volume, the distance between two vortices, the free stream velocity and the maximum tangent velocity of the vortex. The sensitive parameters were found to detect vortices using the pulsed Doppler techniques.
基金Supported by the National High Technology Research and Development Program of China (863 Program)(2007AA10Z239)the National Key Technology R&D Program(2006BAD03B0102)+2 种基金the Natural Science Foundation of Guangdong Province(5004159)Scienceand Technology Planning Project of Guangdong Province(2005N33201012)the Open Fund of Key Laboratory of Genetic Breeding and Aquaculture Biology of Freshwater Fishes,Ministry of Agriculture(BM2007-03)~~
文摘[Objective] The study aimed to research the nutrients release of ponds sediment.[Method] The sediments which from a new pond(A) and an old one (B) these analyses used to carry out indoor experiment under the anaerobic dark condition for researching on nutrient release. The N(nitrogenous) and P(phosphorous) release were analyzed every two days.[Result] At the prophase, the N release in B was bigger than that in A, while the decline sediment release in A was gentle.[Conclusion] There was no accumulation of organic compound during the breeding time. The NH4-N was the main form of N release; and the P release was correlated with N release, while PO4-P was the main form of P release.
基金financially supported by the China Postdoctoral Science Foundation (Nos. 2015T80039 and 2014M560890)
文摘In this study, a water/silicone oil interface was used to simulate the steel/slag interface in a converter. A high-speed camera was used to record the entrainment process of droplets when air bubbles were passed through the water/silicone oil interface. Motion parameters of the bubbles and droplets were obtained using particle kinematic analysis software, and the entrainment rate of the droplets was calculated. It was found that the entrainment rate decreased from 29.5% to 0 when the viscosity of the silicone oil was increased from 60 mPa.s to 820 mPa.s in the case of bubbles with a 5 mm equivalent diameter passing through the water/silicone oil interface. The results indicate that in- creasing the viscosity of the silicone oil is conducive to reducing the entrainment rate. The entrainment rate increased from 0 to 136.3% in the case of silicone oil with a viscosity of 60 mPa.s when the equivalent diameter of the bubbles was increased from 3 mm to 7 ram. We there- fore conclude that small bubbles are also conductive to reducing the entrainment rate. The force analysis results for the water colmnn indicate that the entrainment rate of droplets is affected by the velocity of the bubble passing through the water/silicone oil interface and that the en- trainment rate decreases with the bubble velocity.
文摘A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.
文摘The effect of the valence band tail width on the open circuit voltage of P3HT：PCBM bulk heterojunction solar cell is investigated by using the AMPS-1D computer program. An effective medium model with exponential valence and conduction band tail states is used to simulate the photovoltaic cell. The simulation result shows that the open circuit voltage depends Iinearly on the logarithm of the generation rate and the slope depends on the width of the valence band tail. The open circuit voltage decreases with the increasing width of the band tail. The dark and light ideality factors increase with the width of the valence band tail.
基金Project supported by the China Scholarship Council(Grant No.201906370050).
文摘Despite the growing interest in macroscopic epidemiological models to deal with threats posed by pandemics such as COVID-19,little has been done regarding the assessment of disease spread in day-to-day life,especially within buildings such as supermarkets where people must obtain necessities at the risk of exposure to disease.Here,we propose an integrated customer shopping simulator including both shopper movement and choice behavior,using a force-based and discrete choice model,respectively.By a simple extension to the force-based model,we implement the following preventive measures currently taken by supermarkets;social distancing and one-way systems,and different customer habits,assessing them based on the average individual disease exposure and the time taken to complete shopping(shopping efficiency).Results show that maintaining social distance is an effective way to reduce exposure,but at the cost of shopping efficiency.We find that the one-way system is the optimal strategy for reducing exposure while minimizing the impact on shopping efficiency.Customers should also visit supermarkets less frequently,but buy more when they do,if they wish to minimize their exposure.We hope that this work demonstrates the potential of pedestrian dynamics simulations in assessing preventative measures during pandemics,particularly if it is validated using empirical data.
文摘In this paper, an algorithm for simulating fluid flow and heat transfer for mold filling of shaped castings is presented. The main features of the algorithm include: 1) a simple but practical technique based on VOF method to determine free surface, 2) an explicit scheme of enthalpy to solve the energy equation more efficiently, and 3) an effective treatment to modify the flux deviation due to pressure iteration. In order to verify these methods, well controlled experiments have been repeatedly done with both water analog and gray iron pouring experiments to record the flow patterns and temperature variations. The calculated results are in accordance with the experimental ones. For the applications, the simulated initial temperature distribution right after mold filling was used to analyse subsequent solidification and to predict shrinkage defects. Actual castings were poured and tested in a foundry plant. The reuslts show that the defects predication with considering fluid flow effects is more precise than that without considering the effects.
基金National Natural Science Foundation of China(No.51405010)National Science and Technology Support Program,China(No.2011BAG09B00)
文摘The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.
文摘In order to evaluate the main factors influencing the core-shooting process and to optimize the design of core boxes, the fluid-particle (air-sand) model has been built based on the two-phase flow theory. The fluid phase, air, and the particulate phase, sand granules, have been treated as a continuum. By using this model, it is possible to simulate the flow and compaction behavior of sand particles during the core-shooting process. To benchmark the calculated results, the shooting process has been recorded with a digital high speed camera, and the inlet condition of sand particles has also been achieved by using the camera. The preliminary results have showed that the calculation is in agreement with the testing results.
基金Supported by the Basic Science Research Program through the National Research Foundation of Korea Funded by the Ministry of Education,Science and Technology under Grant No 2012-0002777
文摘We evaluate the impact of temperature on the output behavior of a carbon nanotube field effect transistor （CNFET） based chaotic generator. The sources cause the variations in both current-voltage characteristics of the CNFET device and an overall chaotic circuit is pointed out. To verify the effect of temperature variation on the output dynamics of the chaotic circuit, a simulation is performed by employing the CNFET compact model of Wong et al. in HSPICE with a temperature range from -100℃ to 100℃. The obtained results with time series, frequency spectra, and bifurcation diagram from the simulation demonstrate that temperature plays a significant role in the output dynamics of the CNFET-based chaotic circuit. Thus, temperature-related issues should be taken into account while designing a high-quality chaotic generator with high stability.
文摘A transport simulation has been done by using a i.5D time dependent transportcode to reproduce a formation of the ITB on electron temperature Profile during the long pu1seLHCD in JT-60U tokamak. The transport coefficients were assumed to reduce with a reversedmagnetic shear and the LH driven current profile was evaluated by fitting dynamic change inthe measured current profile. The gradual increase in the central electron temperature could beexplained by the change in the current profile during LHCD in the present simulation model. Theestimated LH-driven current profile by the transport code analysis shows a finite current densityat the plasma center. Analysis of transport simulation suggests some mechanisms for broadeningthe LH-driven current profile at the central region of the plasma.
基金Supported by the Basic Research Project of Shanxi Province under Grant No 2015021092the National Natural Science Foundation of China under Grant Nos 61471255,61474079,61501316,51505324 and 51622507the National High-Technology Research and Development Program of China under Grant No 2015AA042601
文摘The method of using dielectrophoresis （DEP） to assemble graphene between micro-electrodes has been proven to be simple and efficient. We present an optimization method for the kinetic formula of graphene DEP, and discuss the simulation of the graphene assembly process based on the finite element method. The simulated results illustrate that the accelerated motion of graphene is in agreement with the distribution of the electric field squared gradient. We also conduct research on the controllable parameters of the DEP assembly such as the alternating current （AC） frequency, the shape of micro-electrodes, and the ratio of the gap between electrodes to the characteristic/geometric length of graphene （λ）. The simulations based on the Clausius-Mossotti factor reveal that both graphene velocity and direction are influenced by the AC frequency. When graphene is close to the electrodes, the shape of micro-electrodes will exert great influence on the velocity of graphene. Also, λ has a great influence on the velocity of graphene. Generally, the velocity of graphene would be greater when λ is in the range of 0.4 0.6. The study is of a theoretical guiding significance in improving the precision and efficiency of the graphene DEP assembly.
文摘The boiler is one of the key parts of power station. Monitoring the operation of the boiler automatically, continuously and accurately is very important. In case of malfunctions, an expert system might be helpful to find the sources of faults, and thereafter will assist the operator to act correctly and to prevent the fault from further development.In this paper, a simulation study of an expert system, which can diagnose the running faults of boiler system, is conducted. Shallow and deep two-layer knowledge base structure is used in this two layers of knowledge base. So. this kind of expert system can overcome the disadvantages of the old types of expert systems, which are only able to deal with experience rules base.A simulator of power boiler is used for the research on fault diagnose expert system. This boiler simulator gives all necessary information for the diagnosis. The knowledge base of expert system is built in hierarchies, so the speed of reasoning may be invreased. After the reasoning the
基金supported by the Netherlands eScience Center under grant number ODISSEI.2022.023。
文摘Active learning can be used for optimizing and speeding up the screening phase of systematic reviews.Running simulation studies mimicking the screening process can be used to test the performance of different machine-learning models or to study the impact of different training data.This paper presents an architecture design withamultiprocessing computational strategyforrunningmanysuch simulation studiesinparallel,using the ASReview Makita workflow generator and Kubernetes software for deployment with cloud technologies.We provide a technical explanation of the proposed cloud architecture and its usage.In addition to that,we conducted 1140 simulations investigating the computational time using various numbers of CPUs and RAM settings.Our analysis demonstrates the degree to which simulations can be accelerated with multiprocessing computing usage.The parallel computation strategy and the architecture design that was developed in the present paper can contribute to future research with more optimal simulation time and,at the same time,ensure the safe completion of the needed processes.
文摘Modelling of carob batch fermentation is established basing on mass transfer balances. The modelling treats the reaction kinetics of substrate （S）, the micro-organisms （X） and the ethanol （E）. Nine models are taken from the literature to describe specific organism growth rate and specific ethanol development rate. These models treat all types of fermentation. The Phisalapbong et al. model and the Ghose and Tyagi model show the best fit of the experimental data. This affirms that the batch fermentation of carob is conducted with substrate and/or ethanol inhibition. Some simulations and relationships （X = f（S）, E = f（S）） are obtained from the Phisalaphong et al. model. Those simulations show a lot of important and useful results of carob batch fermentation process.
