In this paper, the analyzing approaches proposed by Zhao Dongfeng, et al.(1997) have been extensively studied. The average cyclic times of the slotted multiple access systems are analyzed by using the average cycle me...In this paper, the analyzing approaches proposed by Zhao Dongfeng, et al.(1997) have been extensively studied. The average cyclic times of the slotted multiple access systems are analyzed by using the average cycle method. Analytic formulae for mean values of a successful period and a colliding period and an idle period are derived. The upper bounds of the system throughput with capture effect and collision resolution are provided. Finally, the simulation results of the slotted multiple access channels are given.展开更多
为预估和延长双圆弧谐波减速器刚轮插齿刀有效长度,论文建立了双圆弧刚轮齿廓数学模型,根据运动学法,建立了插刀加工数学仿真模型;根据齿廓法线法,建立了砂轮磨削加工数学模型,推导了刃磨后插刀的等效齿形与加工误差,确定了插刀的有效...为预估和延长双圆弧谐波减速器刚轮插齿刀有效长度,论文建立了双圆弧刚轮齿廓数学模型,根据运动学法,建立了插刀加工数学仿真模型;根据齿廓法线法,建立了砂轮磨削加工数学模型,推导了刃磨后插刀的等效齿形与加工误差,确定了插刀的有效长度。在此基础上,论文通过优化砂轮齿形与插刀齿数,延长了插刀有效长度。结果表明:优化前55齿插刀有效长度为2.1 mm, 0截面插刀加工出刚轮齿形误差为2μm;优化后0截面插刀加工出刚轮齿形误差的最大值为0.14μm。优化后插刀齿数越多,插刀有效长度越长;优化后42齿、55齿、68插刀有效长度分别增加了4.8%、52%、81%。展开更多
文摘In this paper, the analyzing approaches proposed by Zhao Dongfeng, et al.(1997) have been extensively studied. The average cyclic times of the slotted multiple access systems are analyzed by using the average cycle method. Analytic formulae for mean values of a successful period and a colliding period and an idle period are derived. The upper bounds of the system throughput with capture effect and collision resolution are provided. Finally, the simulation results of the slotted multiple access channels are given.
文摘为预估和延长双圆弧谐波减速器刚轮插齿刀有效长度,论文建立了双圆弧刚轮齿廓数学模型,根据运动学法,建立了插刀加工数学仿真模型;根据齿廓法线法,建立了砂轮磨削加工数学模型,推导了刃磨后插刀的等效齿形与加工误差,确定了插刀的有效长度。在此基础上,论文通过优化砂轮齿形与插刀齿数,延长了插刀有效长度。结果表明:优化前55齿插刀有效长度为2.1 mm, 0截面插刀加工出刚轮齿形误差为2μm;优化后0截面插刀加工出刚轮齿形误差的最大值为0.14μm。优化后插刀齿数越多,插刀有效长度越长;优化后42齿、55齿、68插刀有效长度分别增加了4.8%、52%、81%。
