This study explored the synergistic interaction of sewage sludge(SS)and automotive paint sludge(PS)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric an...This study explored the synergistic interaction of sewage sludge(SS)and automotive paint sludge(PS)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analysis(TGA)and thermogravimetric-mass spectrometry(TGA-MS).The result reveals the coexisting synergistic and antagonistic effects in the co-pyrolysis of SS/PS.The synergistic effect arises from hydrogen free radicals in SS and catalytic components in PS,while the main source of the antagonistic effect is that,during the mechanical mixing process,the SS/PS is converted from the particulate form into a dough-like rubbery which contributes to the film-forming effect,hindering the volatilization of volatile components.SS/PS co-pyrolysis reduces the yielding of tar production while increasing coke and gas.This study will provide some in-depth insights into the co-pyrolysis of SS/PS,and offer theoretical support for the subsequent research on the collaborative disposal processes in cement kilns.展开更多
Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important issue.But,very often it is overlooked by academia,original equipment manufacturers(OEM)...Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important issue.But,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die casters.The aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process parameters.The Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn ratio.The design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding time.The sludge yield(SY)and intermetallic size(IS)was selected as two responses.The optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,respectively.The best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,respectively.Three groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg alloys.The CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental data.The Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed easily.The Physical Sludge Factor could be used for mass production with a single type of Mg alloy,in which the chemistry fluctuation might be negligible.In large Mg casting suppliers with multiple melting and holding furnaces and a number of Mg alloys in production,the Comprehensive Sludge Factor should be implemented to diminish the sludge formation.展开更多
This work investigates the influence of the type sludge on drainage, plant development, purification performances and biosolids quality. Drainage properties were measured through the frequency of clogging, the percent...This work investigates the influence of the type sludge on drainage, plant development, purification performances and biosolids quality. Drainage properties were measured through the frequency of clogging, the percentage of leachate recovered and the dryness of accumulated sludge. Plant development was measured through the density, the height and the stem diameter. Purification performance was evaluated from the reduction rate. Biosolids quality was measured after 3 months of maturation. The results show that the clogging frequencies were 9.5%;0% and 3.7%;the volume of leachate recovered was 42.2%;20.4% and 24.7% and, the dryness was 33.4%;61.1% and 52.4% for FS-ST, FS-STT and SS respectively. Plants densities were about, with densities 197.1, 171.3 and 178.3 plants/m2 in beds fed respectively with FS-ST, FS-STT and SS. Despite the high removal rates, the concentrations of pollutants in the leachates are above the Senegalese standard NS 05-061 for discharge into the environment. The biosolids are all mature with C/N and NH4+/NO3?ratios lower than 12 and 1 respectively. The biosolids are also rich in organic and mineral elements. The concentrations of Ascaris eggs are higher than the WHO recommendations. These biosolids should be stored for additional time or composted.展开更多
In this paper, CiteSpace, a bibliometrics software, was adopted to collect research papers published on the Web of Science, which are relevant to biological model and effluent quality prediction in activated sludge pr...In this paper, CiteSpace, a bibliometrics software, was adopted to collect research papers published on the Web of Science, which are relevant to biological model and effluent quality prediction in activated sludge process in the wastewater treatment. By the way of trend map, keyword knowledge map, and co-cited knowledge map, specific visualization analysis and identification of the authors, institutions and regions were concluded. Furthermore, the topics and hotspots of water quality prediction in activated sludge process through the literature-co-citation-based cluster analysis and literature citation burst analysis were also determined, which not only reflected the historical evolution progress to a certain extent, but also provided the direction and insight of the knowledge structure of water quality prediction and activated sludge process for future research.展开更多
The synergetic effect and underlying mechanism of potassium ferrate(PF)with tea saponin(TS,a biosurfactant)in producing short chain fatty acids(SCFAs)from anaerobic fermentation of waste activated sludge(WAS)were expl...The synergetic effect and underlying mechanism of potassium ferrate(PF)with tea saponin(TS,a biosurfactant)in producing short chain fatty acids(SCFAs)from anaerobic fermentation of waste activated sludge(WAS)were explored in this work.Experimental results showed that 0.2 g PF(g TSS)^(-1)(total suspended solid)combined with 0.02 g TS(g TSS)^(-1) could further improve SCFAs’production,and the maximum SCFAs content reached 2008.7 mg COD L^(-1),which is 1.2 and 4.5 times higher than those with PF and TS individually added,respectively,and 5.3 times higher than that of blank WAS on Day 12.In the model substrates experiments,the degradation rates of bovine serum albumin and dextran with combination of PF and TS were 41.3%±0.1% and 48.5%±0.06%,respectively,on Day 3,which are lower than those in blank WAS(with degradation rates of 72.3%±0.5%and 90.3%±0.3%).It was revealed that the oxidative effect of PF and the solubilization of TS caused more organic matters to be dissolved out from WAS,providing a large number of biodegradable substances for subsequent SCFAs production.While WAS pretreated with the combination of PF and TS,the relative abundances of Firmicutes increased from 6.4%(blank)to 38.6%,and that of Proteobacteria decreased from 41.8%(blank)to 21.8%.The combination of PF and TS promoted the hydrolysis process of WAS by enriching Firmicutes,and then increased acetic acid production by inhibiting Proteobacteria that consumed SCFAs.Meanwhile,at the genus level,acidogenesis bacteria(e.g.,Proteiniclasticum and Petrimonas)were enriched whereas SCFAs consuming bacteria(e.g.,Dokdonella)were inhibited.展开更多
Developing low-cost and green simultaneous desulfurization and denitrification technologies is of great significance for sulfur dioxide(SO_(2))and nitrogen oxide(NO_(x))emission control at low temperatures,especially ...Developing low-cost and green simultaneous desulfurization and denitrification technologies is of great significance for sulfur dioxide(SO_(2))and nitrogen oxide(NO_(x))emission control at low temperatures,especially for small and medium-sized coal-fired boilers and furnaces.Herein,phosphorus sludge,an industrial waste from the production process of yellow phosphorus,has been developed to simultaneously eliminate SO_(2)and NO_(x)from coal-fired flue gas.The key factors affecting the experimental results indicate that desulfurization and denitrification efficiency of over 95%can be achieved at a low temperature of 55℃.Further,the absorption mechanism was investigated by characterizing the solid and liquid phases of the phosphorus sludge during the absorption process.The efficient removal of SO_(2)is attributed to the abundance of iron(Fe^(3+))and manganese(Mn^(2+))in the absorbent.SO_(2)can be rapidly catalyzed and converted to SO_(4)^(2-)by them.The key to NOx removal is the oxidation of NO toward watersoluble high-valent nitrogen oxides by oxidizing reactive substances induced via yellow phosphorus,which are then absorbed by water and converted to NO_(3)^(-).Meanwhile,yellow phosphorus is oxidized to phosphoric acid(H_(3)PO_(4)).The spent absorption slurry can be reused through wet process phosphoric acid production,as it contains sulfuric acid(H_(2)SO_(4)),nitric acid(HNO_(3)),and H_(3)PO_(4).Accordingly,this is a technology with broad application prospects.展开更多
The issue of faecal sludge management in developing countries remains a significant challenge due to the indiscriminate discharge of sludge into the environment. This practice generates more environmental problems tha...The issue of faecal sludge management in developing countries remains a significant challenge due to the indiscriminate discharge of sludge into the environment. This practice generates more environmental problems than it solves. This study aims to assess the management of household faecal sludge in the communes of Abomey-Calavi and Natitingou, Benin, in order to optimise the best storage conditions for subsequent more effective treatment. To this end, a sociological survey was conducted among households in Abomey-Calavi and Natitingou, as well as among manual emptiers. The results of our studies revealed that two types of latrines are used in households. 20.55% of households use traditional latrines, while 59.83% use ordinary latrines. 7.97% of households use both types of latrine. Moreover, the depth of the latrines varies from 2.5 m to 7 m in Abomey-Calavi and from 2.5 m to 8 m in Natitingou. Among households with a latrine, 28.26% empty their pit at least once, while 71.74% have never emptied it. The emptying cost varies between 35,000 FCFA and 90,000 FCFA. The mixing of faecal sludge with solid waste, including plastic materials, makes emptying difficult due to the obstruction of the vacuum pump. The results obtained will serve as a reliable database to facilitate decision-making in the context of faecal sludge management.展开更多
This study explored the synergistic interaction of sewage sludge(SS)and distillation residue(DR)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analy...This study explored the synergistic interaction of sewage sludge(SS)and distillation residue(DR)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analysis(TGA)and thermogravimetric analysis with mass spectrometry(TGA-MS).The results reveal the coexisting synergistic and antagonistic effects in the co-pyrolysis of SS/DR.The synergistic effect arises from hydrogen free radicals in SS and catalytic components in ash fractions,while the antagonistic effect is mainly due to the melting of DR on the surface of SS particles during pyrolysis and the reaction of SS ash with alkali metals to form inert substances.SS/DR co-pyrolysis reduces the yielding of coke and gas while increasing tar production.This study will promote the reduction,recycling,and harmless treatment of hazardous solid waste.展开更多
The development of more environment-friendly ways to dispose of oil sludge is currently regarded as a hot topic.In this context,gasification technologies are generally seen as a promising way to combine oil sludge wit...The development of more environment-friendly ways to dispose of oil sludge is currently regarded as a hot topic.In this context,gasification technologies are generally seen as a promising way to combine oil sludge with coal–water slurry(CWS)and generate resourceful fuel.In this study,a novel five-nozzle gasifier reactor was analyzed by means of a CFD(Computational fluid dynamic)method.Among several influential factors,special attention was paid to the height-to-diameter ratio of the gasifier and the mixing ratio of oil sludge,which are known to have a significant impact on the flow field,temperature distribution and gasifier performances.According to the numerical results,the optimal height-to-diameter ratio and oil mixing ratio are about 2.4:1 and 20%,respectively.Furthermore,the carbon conversion rate can become as high as 98.55%with the hydrolysis rate reaching a value of 53.88%.The consumption of raw coal and oxygen is generally reduced,while the effective gas production is increased to 50.93 mol/%.展开更多
The unbalanced and inadequate use of fertilizers is one of the causes of soil degradation. Combined with the ever-increasing population, it is necessary to find sustainable agricultural production alternatives. The pr...The unbalanced and inadequate use of fertilizers is one of the causes of soil degradation. Combined with the ever-increasing population, it is necessary to find sustainable agricultural production alternatives. The present work aims to determine the effect of different rates and mixtutes of organic amendments on soil fertility and the performance of Sunflower (Helianthus annuus L.). In the field, treatments consisted of solid household waste and faecal sludge in the ratios of 3/5 (V1), and a mixture of faecal sludge and household waste in the ratio of 3/5 with 900 worms (V2). At the end of the composting process, V1, V2 composts and the poultry manure (PM) were applied at rates of 4, 5 and 6 t∙ha−1 in a randomized complete block design with three replications. Soil samples were collected before and after the experiment and analyzed. The main results revealed that at the end of the composting process, there was a progressive improvement in the physico-chemical properties of V1 and V2 composts. In particular, the C/N ratio, phosphorus (P) and total nitrogen (TN) initially at 16.49 ± 0.42 (V1, V2), 21.06 ± 0.07 mg∙kg−1 (V1, V2), 0.76% ± 0.08% (V1, V2) respectively, increased after 60 days to 12.40 ± 0.41 (V1), 9.74 ± 0.28 (V2) for C/N, 21.94 ± 0.63 mg∙kg−1 (V1) and 22.04 ± 0.04 mg∙kg−1 (V2) for P, 0.96% ± 0.0% (V1) and 1.22 ± 0.04 (V2) for TN. The application of 6 t∙ha−1of PM had the greatest influence on the diameter and weight of the flower heads (27.16 ± 4.01 t∙ha−1 and 230.83 ± 2.64 t∙ha−1), while 4 t∙ha−1 of V2 gave the tallest sunflower plants (110.07 ± 73.28 cm) as well as the diameter at the crown (19.30 ± 9.07 cm). However, CEC was most influenced by 4 t∙ha−1 of V1, while 4 t∙ha−1 of PM had the greatest effect on organic carbon and phosphorus. However, 5 t∙ha−1 of PM showed the highest sunflower production and yield (1.67 ± 0.21 t∙ha−1). The combination with 900 earthworms is recommended for composting and 5 t∙ha−1 of PM is recommended to obtain a better sunflower production.展开更多
This study proposed an improved bio-carbonation of reactive magnesia cement(RMC)method for dredged sludge stabilization using the urea pre-hydrolysis strategy.Based on unconfined compression strength(UCS),pickling-dra...This study proposed an improved bio-carbonation of reactive magnesia cement(RMC)method for dredged sludge stabilization using the urea pre-hydrolysis strategy.Based on unconfined compression strength(UCS),pickling-drainage,and scanning electron microscopy(SEM)tests,the effects of prehydrolysis duration(T),urease activity(UA)and curing age(CA)on the mechanical properties and microstructural characteristics of bio-carbonized samples were systematically investigated and analyzed.The results demonstrated that the proposed method could significantly enhance urea hydrolysis and RMC bio-carbonation to achieve efficient stabilization of dredged sludge with 80%high water content.A significant strength increment of up to about 1063.36 kPa was obtained for the bio-carbonized samples after just 7 d of curing,which was 2.64 times higher than that of the 28-day cured ordinary Portland cement-reinforced samples.Both elevated T and UA could notably increase urea utilization ratio and carbonate ion yield,but the resulting surge in supersaturation also affected the precipitation patterns of hydrated magnesia carbonates(HMCs),which weakened the cementation effect of HMCs on soil particles and further inhibited strength enhancement of bio-carbonized samples.The optimum formula was determined to be the case of T?24 h and UA?10 U/mL for dredged sludge stabilization.A 7-day CA was enough for bio-carbonized samples to obtain stable strength,albeit slightly affected by UA.The benefits of high efficiency and water stability presented the potential of this method in achieving dredged sludge stabilization and resource utilization.This investigation provides informative ideas and valuable insights on implementing advanced bio-geotechnical techniques to achieve efficient stabilization of soft soil,such as dredged sludge.展开更多
Taking an industrial sludge and its preparation of sludge wrap shell aggregates(WSAs)instead of sand to prepare baking-free brick as the research object,the development law of mechanical properties and the influence m...Taking an industrial sludge and its preparation of sludge wrap shell aggregates(WSAs)instead of sand to prepare baking-free brick as the research object,the development law of mechanical properties and the influence mechanism of macro and micro characteristic parameters of the bricks under different sludge and WSAs replacement rates were studied through the macroscopic mechanical properties test,with the help of nuclear magnetic resonance(NMR),transmission electron microscopy-energy spectrum and other testing technology and pores and cracks analysis system(PCAS)software.The results showed that the compressive strength of each sample decreased with the increase of sludge content.When the sludge content was less than 30%,it was mainly affected by the water-binder ratio.When the sludge content was more than 30%,it was mainly affected by the sludge content.At the age of 7 days,with the increase in replacement rate of WSAs,the compressive strength of the S10 and S30 groups was higher than that of the control group.The compressive strength of the S50 experimental group was 30.38 MPa,and the loss of compressive strength was slight compared with the control group.The water absorption rate of the 28 days S100 experimental group increased by 10.71%compared with the control group.When the content of WSAs was less than 50%,the holes above 0.1μm in the brick can be reduced and transformed into smaller holes,with a decreasing trend of the plane porosity of the brick.The microscopic results of the baking-free brick showed that the three-phase system of WSAs-interface transition area-mortar was poorly bonded and delaminated compared with the gravel aggregate-interface transition area-mortar system,and damage was more likely to occur in the WSAs and interface transition area.The above results show that it is feasible to use sludge and WSAs instead of sand for the preparation of baking-free bricks.This technology not only solves the problem of sludge disposal,but also protects the over-exploitation of mineral resources,and the technology has a broad application prospect and market value.展开更多
In this study,hydrogels were prepared from municipal sludge to recycle and realize the value-added utilization of the carbon components in this abundant waste material.The carbon sources were extracted from the munici...In this study,hydrogels were prepared from municipal sludge to recycle and realize the value-added utilization of the carbon components in this abundant waste material.The carbon sources were extracted from the municipal sludge using synthesised nano CaO_(2)as an oxidant,and the carbon sources were graft copolymerised with acrylic acid monomer using N,N′-methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator.The factors influencing the hydrogel preparation were investigated by single-factor experiments.Based on the results of the single-factor experiments,a hydrogel with a swelling ratio of up to 19768.4%at 12 h was prepared with an oxidant dosage of 0.20 g,a monomer dosage of 5.8 g,a neutralisation degree of the monomer of 70%,an initiator dosage of 0.15 g,and a crosslinking agent dosage of 0.15 g.The hydrogel preparation conditions were optimized using the response surface method,and the interactions between the different reaction conditions were analysed to obtain the best preparation conditions.X-ray diffraction results showed that hydrogels were amorphous in structure.Scanning electron microscopy images showed that the SiO_(2)particles from the sludge acted as crosslinking points between different layers of hydrogel chains.The crosslinking polymerisation and crosslinking agent worked together to form hydrogels with an inorganic-organic double network structure,and this structure was highly stretchable,resulting in hydrogels with good swelling properties.展开更多
This study evaluated the effect of potassium ferrate(PF)and low-temperature thermal hydrolysis co-pretreatment on the promotion of sludge hydrolysis process and the impact on acid production in the subsequent anaerobi...This study evaluated the effect of potassium ferrate(PF)and low-temperature thermal hydrolysis co-pretreatment on the promotion of sludge hydrolysis process and the impact on acid production in the subsequent anaerobic digestion process.The analytical investigations showed that co-pretreatment significantly facilitated the hydrolysis process of the sludge and contributed to the accumulation of short-chain fatty acids(SCFAs).The pretreatment conditions under the optimal leaching of organic matter from sludge were hydrothermal temperature of 75℃,hydrothermal treatment time of 12 h,and PF dosage of 0.25 g g^(−1)TSS(total suspended solids),according to the results of orthogonal experiments.By pretreatment under proper conditions,the removal rate of soluble chemical oxygen demand(SCOD)achieved 71.8%at the end of fermentation and the removal rate of total phosphorus(TP)was 69.1%.The maximum yield of SCFAs was 750.3 mg L^(−1),7.45 times greater than that of the blank group.Based on the analysis of the anaerobic digestion mechanism,it was indicated that the co-pretreatment could destroy the floc structure on the sludge surface and improve organic matter dissolving,resulting in more soluble organic substances for the acidification process.Furthermore,microbial community research revealed that the main cause of enhanced SCFAs generation was an increase in acidogenic bacteria and a reduction of methanogenic bacteria.展开更多
To fully utilize secondary resources,it will inevitably generate a large amount of deinking sludge using waste paper as raw material for paper making.The sludge contains small fibers and dissolved substances of variou...To fully utilize secondary resources,it will inevitably generate a large amount of deinking sludge using waste paper as raw material for paper making.The sludge contains small fibers and dissolved substances of various chemicals.After adding flocculant and settling treatment,deinked sludge is formed.However,its organic matter content can reach a high level of 40%to 50%,and it can also be reused,effectively avoiding the harmful impact of papermaking sludge on the environment.展开更多
Thermal alkaline hydrolysis is a common pretreatment method for the utilization of excess activated sludge(EAS).Owing to strict environment laws and need for better energy utilization,new methods were developed in thi...Thermal alkaline hydrolysis is a common pretreatment method for the utilization of excess activated sludge(EAS).Owing to strict environment laws and need for better energy utilization,new methods were developed in this study to improve the efficiency of pretreatment method.Direct thermal hydrolysis(TH),pasteurized thermal hydrolysis(PTH),and alkaline pasteurized thermal hydrolysis(PTH+CaO and PTH+NaOH)methods were used to treat EAS.Each method was compared and analyzed in terms of dissolution in ammonium nitrogen(NH_(4)^(+)-N)and soluble COD(SCOD)in EAS.Furthermore,the removal of tetracycline resistance genes(TRGs)and class 1 transposon gene intI1 from EAS was investigated.The NH_(4)^(+)-N and SCOD concentrations in EAS treated by PTH were 1.24 and 2.58 times higher than those of TH.However,the removal efficiency of total TRGs and intI1 between the groups was comparable.The SCOD concentration of the PTH+NaOH group was 4.37 times higher than that of the PTH group,and the removal efficiency of total TRGs was increased by 9.52%compared with that by PTH.The NH_(4)^(+)-N and SCOD concentrations of the PTH+CaO group could reach 85.04%and 92.14%of the PTH+NaOH group,but the removal efficiency of total TRGs by PTH+CaO was 19.78%lower than that by PTH+NaOH.Thus,to reduce the financial cost in actual operation,lime(CaO)can be used instead of a strong alkali(NaOH),and pasteurized steam at 70℃ instead of conventional high-temperature heating to treat EAS.This study provides a reference for the development of alkaline hydrolysis under moderate temperatures along with the removal of TRGs in EAS.展开更多
Municipal sludge is a sedimentation waste produced during the wastewater process in sewage treatment plants.Among recent studies,pilot and field tests showed that chemical conditioning combined with vacuum preloading ...Municipal sludge is a sedimentation waste produced during the wastewater process in sewage treatment plants.Among recent studies,pilot and field tests showed that chemical conditioning combined with vacuum preloading can effectively treat municipal sludge.To further understand the drainage and consolidation characteristics of the conditioning sludge during vacuum preloading,a large deformation nonlinear numerical simulation model based on the equal strain condition was developed to simulate and analyze the pilot and field tests,whereas the simulation results were not satisfactory.The results of the numerical analysis of the pilot test showed that the predicted consolidation degree was greater than that measured by the field tests,which is attributed to the relatively low permeability layer formed during the preloading process of the prefabricated vertical drain.To better reflect the consolidation process of the conditioned sludge,a simplified analysis method considering the low permeability layer around the prefabricated vertical drain was proposed.The initial permeability coefficient of the low permeability layer is determined via numerical simulations using finite difference method.The predicted settlement curve was in good agreement with the measured results,which indicated that the numerical simulation based on the equal strain condition considering the relatively low permeability layer can better analyze the consolidation process of ferric chloride-conditioning sludge with vacuum preloading.展开更多
In the town of Mamou,all homes with sanitation systems are equipped with autonomous installations not connected to a sewer network.The emptying service is provided by manual emptiers and by the living environment and ...In the town of Mamou,all homes with sanitation systems are equipped with autonomous installations not connected to a sewer network.The emptying service is provided by manual emptiers and by the living environment and sanitation service of the urban municipality which has a single 6 m^(3)truck.The objective of this work is to determine the quantity of fecal sludge produced within the city for sustainable management.The methodology adopted is based on a field survey and the use of three methods for evaluating the quantities of sludge(specific production,quantity of sludge collected by the sludge truck and the total production of sludge produced in the various sludge works).The results obtained show that,out of the 2,940 sanitation works identified,2,936 works have been emptied at least once since their construction.Then 2,307 structures are emptied manually or 78.57%,against;619 structures emptied mechanically or 21.08%.The structures are emptied on average every 3 years for septic tanks and every 5 years for dry latrines.The specific production of sludge is 685,241,532 m^(3)/year;the production of sludge by the mechanical emptying technique varies from 588,641.57 m^(3)/year to 724,800.46 m^(3)/year and the production of sludge by manual emptying is 1,573,709.33 m^(3)/year,for a total quantity of sludge produced including between 2,162,350 m^(3)/year to 685,241,531.9 m^(3)/year.展开更多
[Objective] The aim was to study on effect of sludge from different sources on biogas yield efficiency through anaerobic digestion of corn straw. [Method] The present research studied on daily biogas yield and the acc...[Objective] The aim was to study on effect of sludge from different sources on biogas yield efficiency through anaerobic digestion of corn straw. [Method] The present research studied on daily biogas yield and the accumulated biogas amount through anaerobic digestion of corn straw and sludges from four sources. [Result] The accumulated biogas yields produced from sludges in four sources from high to low were granular sludge, river sediments, concentrated sludge and filtered sludge. The first one proved the highest at 3.73 and 56.29 L/kg VS in daily biogas yield and the accumulated biogas. [Conclusion] The research laid foundation for full utilization of straw, improvement of energy utilization and sustainable development.展开更多
基金Funded by National College Student Innovation and Entrepreneurship Training Program Project(No.CY202036)。
文摘This study explored the synergistic interaction of sewage sludge(SS)and automotive paint sludge(PS)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analysis(TGA)and thermogravimetric-mass spectrometry(TGA-MS).The result reveals the coexisting synergistic and antagonistic effects in the co-pyrolysis of SS/PS.The synergistic effect arises from hydrogen free radicals in SS and catalytic components in PS,while the main source of the antagonistic effect is that,during the mechanical mixing process,the SS/PS is converted from the particulate form into a dough-like rubbery which contributes to the film-forming effect,hindering the volatilization of volatile components.SS/PS co-pyrolysis reduces the yielding of tar production while increasing coke and gas.This study will provide some in-depth insights into the co-pyrolysis of SS/PS,and offer theoretical support for the subsequent research on the collaborative disposal processes in cement kilns.
基金Meridian Lightweight Technologies Inc.,Strathroy,Ontario Canadathe University of Windsor,Windsor,Ontario,Canada for supporting this workpart of a large project funded by Meridian Lightweight Technologies,Inc.
文摘Intermetallic formation in sludge during magnesium(Mg)melting,holding and high pressure die casting practices is a very important issue.But,very often it is overlooked by academia,original equipment manufacturers(OEM),metal ingot producers and even die casters.The aim of this study was to minimize the intermetallic formation in Mg sludge via the optimization of the chemistry and process parameters.The Al8Mn5 intermetallic particles were identified by the microstructure analysis based on the Al and Mn ratio.The design of experiment(DOE)technique,Taguchi method,was employed to minimize the intermetallic formation in the sludge of Mg alloys with various chemical compositions of Al,Mn,Fe,and different process parameters,holding temperature and holding time.The sludge yield(SY)and intermetallic size(IS)was selected as two responses.The optimum combination of the levels in terms of minimizing the intermetallic formation were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,690℃ for the holding temperature and holding at 30 mins for the holding time,respectively.The best combination for smallest intermetallic size were 9 wt.%Al,0.15 wt.%Mn,0.001 wt.%(10 ppm)Fe,630℃ for the holding temperature and holding at 60 mins for the holding time,respectively.Three groups of sludge factors,Chemical Sludge(CSF),Physical Sludge(PSF)and Comprehensive Sludge Factors(and CPSF)were established for prediction of sludge yields and intermetallic sizes in Al-containing Mg alloys.The CPSF with five independent variables including both chemical elements and process parameters gave high accuracy in prediction,as the prediction of the PSF with only the two processing parameters of the melt holding temperature and time showed a relatively large deviation from the experimental data.The Chemical Sludge Factor was primarily designed for small ingot producers and die casters with a limited melting and holding capacity,of which process parameters could be fixed easily.The Physical Sludge Factor could be used for mass production with a single type of Mg alloy,in which the chemistry fluctuation might be negligible.In large Mg casting suppliers with multiple melting and holding furnaces and a number of Mg alloys in production,the Comprehensive Sludge Factor should be implemented to diminish the sludge formation.
文摘This work investigates the influence of the type sludge on drainage, plant development, purification performances and biosolids quality. Drainage properties were measured through the frequency of clogging, the percentage of leachate recovered and the dryness of accumulated sludge. Plant development was measured through the density, the height and the stem diameter. Purification performance was evaluated from the reduction rate. Biosolids quality was measured after 3 months of maturation. The results show that the clogging frequencies were 9.5%;0% and 3.7%;the volume of leachate recovered was 42.2%;20.4% and 24.7% and, the dryness was 33.4%;61.1% and 52.4% for FS-ST, FS-STT and SS respectively. Plants densities were about, with densities 197.1, 171.3 and 178.3 plants/m2 in beds fed respectively with FS-ST, FS-STT and SS. Despite the high removal rates, the concentrations of pollutants in the leachates are above the Senegalese standard NS 05-061 for discharge into the environment. The biosolids are all mature with C/N and NH4+/NO3?ratios lower than 12 and 1 respectively. The biosolids are also rich in organic and mineral elements. The concentrations of Ascaris eggs are higher than the WHO recommendations. These biosolids should be stored for additional time or composted.
文摘In this paper, CiteSpace, a bibliometrics software, was adopted to collect research papers published on the Web of Science, which are relevant to biological model and effluent quality prediction in activated sludge process in the wastewater treatment. By the way of trend map, keyword knowledge map, and co-cited knowledge map, specific visualization analysis and identification of the authors, institutions and regions were concluded. Furthermore, the topics and hotspots of water quality prediction in activated sludge process through the literature-co-citation-based cluster analysis and literature citation burst analysis were also determined, which not only reflected the historical evolution progress to a certain extent, but also provided the direction and insight of the knowledge structure of water quality prediction and activated sludge process for future research.
基金supported by the National Natural Science Foundation of China(No.41276067)the Air Liquide(China)R&D Co.,Ltd.(No.20200216).
文摘The synergetic effect and underlying mechanism of potassium ferrate(PF)with tea saponin(TS,a biosurfactant)in producing short chain fatty acids(SCFAs)from anaerobic fermentation of waste activated sludge(WAS)were explored in this work.Experimental results showed that 0.2 g PF(g TSS)^(-1)(total suspended solid)combined with 0.02 g TS(g TSS)^(-1) could further improve SCFAs’production,and the maximum SCFAs content reached 2008.7 mg COD L^(-1),which is 1.2 and 4.5 times higher than those with PF and TS individually added,respectively,and 5.3 times higher than that of blank WAS on Day 12.In the model substrates experiments,the degradation rates of bovine serum albumin and dextran with combination of PF and TS were 41.3%±0.1% and 48.5%±0.06%,respectively,on Day 3,which are lower than those in blank WAS(with degradation rates of 72.3%±0.5%and 90.3%±0.3%).It was revealed that the oxidative effect of PF and the solubilization of TS caused more organic matters to be dissolved out from WAS,providing a large number of biodegradable substances for subsequent SCFAs production.While WAS pretreated with the combination of PF and TS,the relative abundances of Firmicutes increased from 6.4%(blank)to 38.6%,and that of Proteobacteria decreased from 41.8%(blank)to 21.8%.The combination of PF and TS promoted the hydrolysis process of WAS by enriching Firmicutes,and then increased acetic acid production by inhibiting Proteobacteria that consumed SCFAs.Meanwhile,at the genus level,acidogenesis bacteria(e.g.,Proteiniclasticum and Petrimonas)were enriched whereas SCFAs consuming bacteria(e.g.,Dokdonella)were inhibited.
基金The National Natural Science Foundation of China (22068019)Yunnan Major Scientific and Technological Projects (202202AG050001)
文摘Developing low-cost and green simultaneous desulfurization and denitrification technologies is of great significance for sulfur dioxide(SO_(2))and nitrogen oxide(NO_(x))emission control at low temperatures,especially for small and medium-sized coal-fired boilers and furnaces.Herein,phosphorus sludge,an industrial waste from the production process of yellow phosphorus,has been developed to simultaneously eliminate SO_(2)and NO_(x)from coal-fired flue gas.The key factors affecting the experimental results indicate that desulfurization and denitrification efficiency of over 95%can be achieved at a low temperature of 55℃.Further,the absorption mechanism was investigated by characterizing the solid and liquid phases of the phosphorus sludge during the absorption process.The efficient removal of SO_(2)is attributed to the abundance of iron(Fe^(3+))and manganese(Mn^(2+))in the absorbent.SO_(2)can be rapidly catalyzed and converted to SO_(4)^(2-)by them.The key to NOx removal is the oxidation of NO toward watersoluble high-valent nitrogen oxides by oxidizing reactive substances induced via yellow phosphorus,which are then absorbed by water and converted to NO_(3)^(-).Meanwhile,yellow phosphorus is oxidized to phosphoric acid(H_(3)PO_(4)).The spent absorption slurry can be reused through wet process phosphoric acid production,as it contains sulfuric acid(H_(2)SO_(4)),nitric acid(HNO_(3)),and H_(3)PO_(4).Accordingly,this is a technology with broad application prospects.
文摘The issue of faecal sludge management in developing countries remains a significant challenge due to the indiscriminate discharge of sludge into the environment. This practice generates more environmental problems than it solves. This study aims to assess the management of household faecal sludge in the communes of Abomey-Calavi and Natitingou, Benin, in order to optimise the best storage conditions for subsequent more effective treatment. To this end, a sociological survey was conducted among households in Abomey-Calavi and Natitingou, as well as among manual emptiers. The results of our studies revealed that two types of latrines are used in households. 20.55% of households use traditional latrines, while 59.83% use ordinary latrines. 7.97% of households use both types of latrine. Moreover, the depth of the latrines varies from 2.5 m to 7 m in Abomey-Calavi and from 2.5 m to 8 m in Natitingou. Among households with a latrine, 28.26% empty their pit at least once, while 71.74% have never emptied it. The emptying cost varies between 35,000 FCFA and 90,000 FCFA. The mixing of faecal sludge with solid waste, including plastic materials, makes emptying difficult due to the obstruction of the vacuum pump. The results obtained will serve as a reliable database to facilitate decision-making in the context of faecal sludge management.
基金Funded by National College Student Innovation and Entrepreneurship Training Program Project(No.CY202036)。
文摘This study explored the synergistic interaction of sewage sludge(SS)and distillation residue(DR)during co-pyrolysis for the optimized treatment of sewage sludge in cement kiln systems,utilizing thermogravimetric analysis(TGA)and thermogravimetric analysis with mass spectrometry(TGA-MS).The results reveal the coexisting synergistic and antagonistic effects in the co-pyrolysis of SS/DR.The synergistic effect arises from hydrogen free radicals in SS and catalytic components in ash fractions,while the antagonistic effect is mainly due to the melting of DR on the surface of SS particles during pyrolysis and the reaction of SS ash with alkali metals to form inert substances.SS/DR co-pyrolysis reduces the yielding of coke and gas while increasing tar production.This study will promote the reduction,recycling,and harmless treatment of hazardous solid waste.
基金Enterprise Horizontal Project(Project Contract No.2021K2450)Postgraduate Research&Practice Innovation Program of Jiangsu Province,China(SJCX22_1437).
文摘The development of more environment-friendly ways to dispose of oil sludge is currently regarded as a hot topic.In this context,gasification technologies are generally seen as a promising way to combine oil sludge with coal–water slurry(CWS)and generate resourceful fuel.In this study,a novel five-nozzle gasifier reactor was analyzed by means of a CFD(Computational fluid dynamic)method.Among several influential factors,special attention was paid to the height-to-diameter ratio of the gasifier and the mixing ratio of oil sludge,which are known to have a significant impact on the flow field,temperature distribution and gasifier performances.According to the numerical results,the optimal height-to-diameter ratio and oil mixing ratio are about 2.4:1 and 20%,respectively.Furthermore,the carbon conversion rate can become as high as 98.55%with the hydrolysis rate reaching a value of 53.88%.The consumption of raw coal and oxygen is generally reduced,while the effective gas production is increased to 50.93 mol/%.
文摘The unbalanced and inadequate use of fertilizers is one of the causes of soil degradation. Combined with the ever-increasing population, it is necessary to find sustainable agricultural production alternatives. The present work aims to determine the effect of different rates and mixtutes of organic amendments on soil fertility and the performance of Sunflower (Helianthus annuus L.). In the field, treatments consisted of solid household waste and faecal sludge in the ratios of 3/5 (V1), and a mixture of faecal sludge and household waste in the ratio of 3/5 with 900 worms (V2). At the end of the composting process, V1, V2 composts and the poultry manure (PM) were applied at rates of 4, 5 and 6 t∙ha−1 in a randomized complete block design with three replications. Soil samples were collected before and after the experiment and analyzed. The main results revealed that at the end of the composting process, there was a progressive improvement in the physico-chemical properties of V1 and V2 composts. In particular, the C/N ratio, phosphorus (P) and total nitrogen (TN) initially at 16.49 ± 0.42 (V1, V2), 21.06 ± 0.07 mg∙kg−1 (V1, V2), 0.76% ± 0.08% (V1, V2) respectively, increased after 60 days to 12.40 ± 0.41 (V1), 9.74 ± 0.28 (V2) for C/N, 21.94 ± 0.63 mg∙kg−1 (V1) and 22.04 ± 0.04 mg∙kg−1 (V2) for P, 0.96% ± 0.0% (V1) and 1.22 ± 0.04 (V2) for TN. The application of 6 t∙ha−1of PM had the greatest influence on the diameter and weight of the flower heads (27.16 ± 4.01 t∙ha−1 and 230.83 ± 2.64 t∙ha−1), while 4 t∙ha−1 of V2 gave the tallest sunflower plants (110.07 ± 73.28 cm) as well as the diameter at the crown (19.30 ± 9.07 cm). However, CEC was most influenced by 4 t∙ha−1 of V1, while 4 t∙ha−1 of PM had the greatest effect on organic carbon and phosphorus. However, 5 t∙ha−1 of PM showed the highest sunflower production and yield (1.67 ± 0.21 t∙ha−1). The combination with 900 earthworms is recommended for composting and 5 t∙ha−1 of PM is recommended to obtain a better sunflower production.
基金supported by the National Natural Science Foundation of China(Grant Nos.41925012 and 42230710)the Key Laboratory Cooperation Special Project of Western Cross Team of Western Light,CAS(Grant No.xbzg-zdsys-202107).
文摘This study proposed an improved bio-carbonation of reactive magnesia cement(RMC)method for dredged sludge stabilization using the urea pre-hydrolysis strategy.Based on unconfined compression strength(UCS),pickling-drainage,and scanning electron microscopy(SEM)tests,the effects of prehydrolysis duration(T),urease activity(UA)and curing age(CA)on the mechanical properties and microstructural characteristics of bio-carbonized samples were systematically investigated and analyzed.The results demonstrated that the proposed method could significantly enhance urea hydrolysis and RMC bio-carbonation to achieve efficient stabilization of dredged sludge with 80%high water content.A significant strength increment of up to about 1063.36 kPa was obtained for the bio-carbonized samples after just 7 d of curing,which was 2.64 times higher than that of the 28-day cured ordinary Portland cement-reinforced samples.Both elevated T and UA could notably increase urea utilization ratio and carbonate ion yield,but the resulting surge in supersaturation also affected the precipitation patterns of hydrated magnesia carbonates(HMCs),which weakened the cementation effect of HMCs on soil particles and further inhibited strength enhancement of bio-carbonized samples.The optimum formula was determined to be the case of T?24 h and UA?10 U/mL for dredged sludge stabilization.A 7-day CA was enough for bio-carbonized samples to obtain stable strength,albeit slightly affected by UA.The benefits of high efficiency and water stability presented the potential of this method in achieving dredged sludge stabilization and resource utilization.This investigation provides informative ideas and valuable insights on implementing advanced bio-geotechnical techniques to achieve efficient stabilization of soft soil,such as dredged sludge.
基金the Natural Science Foundation of Henan Province(202300410270)Graduate Education Innovation Program fund of North China University of Water Resources and Electric Power(YK-2021-49).
文摘Taking an industrial sludge and its preparation of sludge wrap shell aggregates(WSAs)instead of sand to prepare baking-free brick as the research object,the development law of mechanical properties and the influence mechanism of macro and micro characteristic parameters of the bricks under different sludge and WSAs replacement rates were studied through the macroscopic mechanical properties test,with the help of nuclear magnetic resonance(NMR),transmission electron microscopy-energy spectrum and other testing technology and pores and cracks analysis system(PCAS)software.The results showed that the compressive strength of each sample decreased with the increase of sludge content.When the sludge content was less than 30%,it was mainly affected by the water-binder ratio.When the sludge content was more than 30%,it was mainly affected by the sludge content.At the age of 7 days,with the increase in replacement rate of WSAs,the compressive strength of the S10 and S30 groups was higher than that of the control group.The compressive strength of the S50 experimental group was 30.38 MPa,and the loss of compressive strength was slight compared with the control group.The water absorption rate of the 28 days S100 experimental group increased by 10.71%compared with the control group.When the content of WSAs was less than 50%,the holes above 0.1μm in the brick can be reduced and transformed into smaller holes,with a decreasing trend of the plane porosity of the brick.The microscopic results of the baking-free brick showed that the three-phase system of WSAs-interface transition area-mortar was poorly bonded and delaminated compared with the gravel aggregate-interface transition area-mortar system,and damage was more likely to occur in the WSAs and interface transition area.The above results show that it is feasible to use sludge and WSAs instead of sand for the preparation of baking-free bricks.This technology not only solves the problem of sludge disposal,but also protects the over-exploitation of mineral resources,and the technology has a broad application prospect and market value.
基金support from the National Visiting Scholar Program for Key Young Teachers of Central and Western Universities,the Ministry of Education(19042)the Key Science and Technology Project of Henan Province(212102310064)the National Innovation and the Entrepreneurship Training Program for College Students,Ministry of Education(202111517002).
文摘In this study,hydrogels were prepared from municipal sludge to recycle and realize the value-added utilization of the carbon components in this abundant waste material.The carbon sources were extracted from the municipal sludge using synthesised nano CaO_(2)as an oxidant,and the carbon sources were graft copolymerised with acrylic acid monomer using N,N′-methylenebisacrylamide as a crosslinking agent and ammonium persulfate as an initiator.The factors influencing the hydrogel preparation were investigated by single-factor experiments.Based on the results of the single-factor experiments,a hydrogel with a swelling ratio of up to 19768.4%at 12 h was prepared with an oxidant dosage of 0.20 g,a monomer dosage of 5.8 g,a neutralisation degree of the monomer of 70%,an initiator dosage of 0.15 g,and a crosslinking agent dosage of 0.15 g.The hydrogel preparation conditions were optimized using the response surface method,and the interactions between the different reaction conditions were analysed to obtain the best preparation conditions.X-ray diffraction results showed that hydrogels were amorphous in structure.Scanning electron microscopy images showed that the SiO_(2)particles from the sludge acted as crosslinking points between different layers of hydrogel chains.The crosslinking polymerisation and crosslinking agent worked together to form hydrogels with an inorganic-organic double network structure,and this structure was highly stretchable,resulting in hydrogels with good swelling properties.
基金supported by the National Natural Science Foundation of China(No.41276067)the Air Liquide(China)R&D Co.,Ltd.(No.20200216).
文摘This study evaluated the effect of potassium ferrate(PF)and low-temperature thermal hydrolysis co-pretreatment on the promotion of sludge hydrolysis process and the impact on acid production in the subsequent anaerobic digestion process.The analytical investigations showed that co-pretreatment significantly facilitated the hydrolysis process of the sludge and contributed to the accumulation of short-chain fatty acids(SCFAs).The pretreatment conditions under the optimal leaching of organic matter from sludge were hydrothermal temperature of 75℃,hydrothermal treatment time of 12 h,and PF dosage of 0.25 g g^(−1)TSS(total suspended solids),according to the results of orthogonal experiments.By pretreatment under proper conditions,the removal rate of soluble chemical oxygen demand(SCOD)achieved 71.8%at the end of fermentation and the removal rate of total phosphorus(TP)was 69.1%.The maximum yield of SCFAs was 750.3 mg L^(−1),7.45 times greater than that of the blank group.Based on the analysis of the anaerobic digestion mechanism,it was indicated that the co-pretreatment could destroy the floc structure on the sludge surface and improve organic matter dissolving,resulting in more soluble organic substances for the acidification process.Furthermore,microbial community research revealed that the main cause of enhanced SCFAs generation was an increase in acidogenic bacteria and a reduction of methanogenic bacteria.
文摘To fully utilize secondary resources,it will inevitably generate a large amount of deinking sludge using waste paper as raw material for paper making.The sludge contains small fibers and dissolved substances of various chemicals.After adding flocculant and settling treatment,deinked sludge is formed.However,its organic matter content can reach a high level of 40%to 50%,and it can also be reused,effectively avoiding the harmful impact of papermaking sludge on the environment.
基金supported by the Key R&D Projects of the Sichuan Provincial Department of Science and Technology in 2022 (No.2022YFS0457)Innovation and Entrepreneurship Training Program for College Students (No.202210649050).
文摘Thermal alkaline hydrolysis is a common pretreatment method for the utilization of excess activated sludge(EAS).Owing to strict environment laws and need for better energy utilization,new methods were developed in this study to improve the efficiency of pretreatment method.Direct thermal hydrolysis(TH),pasteurized thermal hydrolysis(PTH),and alkaline pasteurized thermal hydrolysis(PTH+CaO and PTH+NaOH)methods were used to treat EAS.Each method was compared and analyzed in terms of dissolution in ammonium nitrogen(NH_(4)^(+)-N)and soluble COD(SCOD)in EAS.Furthermore,the removal of tetracycline resistance genes(TRGs)and class 1 transposon gene intI1 from EAS was investigated.The NH_(4)^(+)-N and SCOD concentrations in EAS treated by PTH were 1.24 and 2.58 times higher than those of TH.However,the removal efficiency of total TRGs and intI1 between the groups was comparable.The SCOD concentration of the PTH+NaOH group was 4.37 times higher than that of the PTH group,and the removal efficiency of total TRGs was increased by 9.52%compared with that by PTH.The NH_(4)^(+)-N and SCOD concentrations of the PTH+CaO group could reach 85.04%and 92.14%of the PTH+NaOH group,but the removal efficiency of total TRGs by PTH+CaO was 19.78%lower than that by PTH+NaOH.Thus,to reduce the financial cost in actual operation,lime(CaO)can be used instead of a strong alkali(NaOH),and pasteurized steam at 70℃ instead of conventional high-temperature heating to treat EAS.This study provides a reference for the development of alkaline hydrolysis under moderate temperatures along with the removal of TRGs in EAS.
基金acknowledge the financial support from The National Natural Science Foundation No.Gk321002Foundation of Nanjing Hydraulic Research Institute No.Y320012.
文摘Municipal sludge is a sedimentation waste produced during the wastewater process in sewage treatment plants.Among recent studies,pilot and field tests showed that chemical conditioning combined with vacuum preloading can effectively treat municipal sludge.To further understand the drainage and consolidation characteristics of the conditioning sludge during vacuum preloading,a large deformation nonlinear numerical simulation model based on the equal strain condition was developed to simulate and analyze the pilot and field tests,whereas the simulation results were not satisfactory.The results of the numerical analysis of the pilot test showed that the predicted consolidation degree was greater than that measured by the field tests,which is attributed to the relatively low permeability layer formed during the preloading process of the prefabricated vertical drain.To better reflect the consolidation process of the conditioned sludge,a simplified analysis method considering the low permeability layer around the prefabricated vertical drain was proposed.The initial permeability coefficient of the low permeability layer is determined via numerical simulations using finite difference method.The predicted settlement curve was in good agreement with the measured results,which indicated that the numerical simulation based on the equal strain condition considering the relatively low permeability layer can better analyze the consolidation process of ferric chloride-conditioning sludge with vacuum preloading.
文摘In the town of Mamou,all homes with sanitation systems are equipped with autonomous installations not connected to a sewer network.The emptying service is provided by manual emptiers and by the living environment and sanitation service of the urban municipality which has a single 6 m^(3)truck.The objective of this work is to determine the quantity of fecal sludge produced within the city for sustainable management.The methodology adopted is based on a field survey and the use of three methods for evaluating the quantities of sludge(specific production,quantity of sludge collected by the sludge truck and the total production of sludge produced in the various sludge works).The results obtained show that,out of the 2,940 sanitation works identified,2,936 works have been emptied at least once since their construction.Then 2,307 structures are emptied manually or 78.57%,against;619 structures emptied mechanically or 21.08%.The structures are emptied on average every 3 years for septic tanks and every 5 years for dry latrines.The specific production of sludge is 685,241,532 m^(3)/year;the production of sludge by the mechanical emptying technique varies from 588,641.57 m^(3)/year to 724,800.46 m^(3)/year and the production of sludge by manual emptying is 1,573,709.33 m^(3)/year,for a total quantity of sludge produced including between 2,162,350 m^(3)/year to 685,241,531.9 m^(3)/year.
基金National Basic Research Program of China (973 Program) (2009CB724700,2011CBA00800)National Natural Foundation of China (31101269)+4 种基金Scienc & Technology Plotform Construction Programof Jiangxi Province (2010DTZ01900)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education InstitutionsNatural Science Foundation of Jiangsu Department of Education (07KJD350034)High-level Talents Foundation of Jiangsu University (07JDG020)Supported by International Foundation for Science (F 4930-1)~~
文摘[Objective] The aim was to study on effect of sludge from different sources on biogas yield efficiency through anaerobic digestion of corn straw. [Method] The present research studied on daily biogas yield and the accumulated biogas amount through anaerobic digestion of corn straw and sludges from four sources. [Result] The accumulated biogas yields produced from sludges in four sources from high to low were granular sludge, river sediments, concentrated sludge and filtered sludge. The first one proved the highest at 3.73 and 56.29 L/kg VS in daily biogas yield and the accumulated biogas. [Conclusion] The research laid foundation for full utilization of straw, improvement of energy utilization and sustainable development.
