Small modular reactors have received widespread attention owing to their inherent safety,low investment,and flexibility.Small pressurized water reactors(SPWRs)have become important candidates for SMRs owing to their h...Small modular reactors have received widespread attention owing to their inherent safety,low investment,and flexibility.Small pressurized water reactors(SPWRs)have become important candidates for SMRs owing to their high technological maturity.Since the Fukushima accident,research on accident-tolerant fuels(ATFs),which are more resistant to serious accidents than conventional fuels,has gradually increased.This study analyzes the neutronics and thermal hydraulics of an SPWR(ACPR50S)for different ATFs,BeO+UO_(2)−SiC,BeO+UO_(2)−FeCrAl,U_(3)Si_(2)−SiC,and U_(3)Si_(2)−FeCrAl,based on a PWR fuel management code,the Bamboo-C deterministic code.In the steady state,the burnup calculations,reactivity coefficients,power and temperature distributions,and control rod reactivity worth were studied.The transients of the control rod ejection accident for the two control rods with the maximum and minimum reactivity worth were analyzed.The results showed that 5%B-10 enrichment in the wet annular burnable absorbers assembly can effectively reduce the initial reactivity and end-of-life reactivity penalty.The BeO+UO2−SiC core exhibited superior neutronic characteristics in terms of burnup and negative temperature reactivity compared with the other three cases owing to the strong moderation ability of BeO+UO_(2)and low neutron absorption of SiC.However,the U_(3)Si_(2)core had a marginally better power-flattening effect than BeO+UO_(2),and the differential worth of each control rod group was similar between different ATFs.During the transient of a control rod ejection,the changes in the fuel temperature,coolant temperature,and coolant density were similar.The maximum difference was less than 10℃ for the fuel temperature and 2℃ for the coolant temperature.展开更多
In the 12 years since the Belt and Road Initiative was first proposed,many Chinese enterprises have made fruitful achievements in the participating countries of the Belt and Road Initiative.
Background:The isometric steady-state following active lengthening is associated with greater torque production and lower activation,as measured by electromyographic activity(EMG),in comparison with a purely isometric...Background:The isometric steady-state following active lengthening is associated with greater torque production and lower activation,as measured by electromyographic activity(EMG),in comparison with a purely isometric contraction(ISO)at the same joint angle.This phenomenon is termed residual force enhancement(RFE).While there has been a great deal of research investigating the basic mechanisms of RFE,little work has been performed to understand the everyday relevance of RFE.The purpose of this study was to investigate whether neuromuscular control strategies differ between ISO and RFE by measuring torque steadiness of the human ankle plantar flexors.Methods:Following ISO maximal voluntary contractions in 12 males(25±4 years),an active lengthening contraction was performed at 15°/s over a 30°ankle excursion,ending at the same joint angle as ISO(5°dorsiflexion;RFE).Surface EMG of the tibialis anterior and soleus muscles was recorded during all tasks.Torque steadiness was determined as the standard deviation(SD)and coefficient of variation(CV)of the torque trace in the ISO and RFE condition during activation-matching(20%and 60%integrated EMG)and torque-matching(20%and 60%maximal voluntary contraction)experiments.Two-tailed,paired t tests were used,within subjects,to determine the presence of RFE/activation reduction(AR)and whether there was a difference in torque steadiness between ISO and RFE conditions.Results:During the maximal and submaximal conditions,there was 5%-9%RFE with a 9%-11%AR(p<0.05),respectively,with no difference in antagonist coactivation between RFE and ISO(p>0.05).There were no differences in SD and CV of the torque trace for the 20%and60%activation-matching or the 60%and maximal torque-matching trials in either the RFE or ISO condition(p>0.05).During the 20%torquematching trial,there were～37%higher values for SD and CV in the RFE as compared with the ISO condition(p<0.05).A significant moderate-to-strong negative relationship was identified between the reduction in torque steadiness following active lengthening and the accompanying AR(p<0.05).Conclusion:It appears that while the RFE-associated AR provides some improved neuromuscular economy,this comes at the cost of increased torque fluctuations in the isometric steady-state following active lengthening during submaximal contractions.展开更多
Understanding the steady mechanism of biomass smoldering plays a great role in the utilization of smoldering technology.In this study numerical analysis of steady smoldering of biomass rods was performed.A two-dimensi...Understanding the steady mechanism of biomass smoldering plays a great role in the utilization of smoldering technology.In this study numerical analysis of steady smoldering of biomass rods was performed.A two-dimensional(2D)steady model taking into account both char oxidation and pyrolysis was developed on the basis of a calculated propagation velocity according to empirical correlation.The model was validated against the smoldering experiment of biomass rods under natural conditions,and the maximum error was smaller than 31%.Parameter sensitivity analysis found that propagation velocity decreases significantly while oxidation area and pyrolysis zone increase significantly with the increasing diameter of rod fuel.展开更多
Gas-phase polyethylene(PE)processes are among the most important methods for PE production.A deeper understanding of the process characteristics and dynamic behavior,such as properties of PE and reactor stability,hold...Gas-phase polyethylene(PE)processes are among the most important methods for PE production.A deeper understanding of the process characteristics and dynamic behavior,such as properties of PE and reactor stability,holds substantial interest for both academic researchers and industries.In this study,both steady-state and dynamic models for a gas-phase polyethylene process are established as a simulation platform,which can be used to study a variety of operation tasks for commercial solution polyethylene processes,such as new product development,process control and real-time optimization.The copolymerization kinetic parameters are fitted by industrial data.Additionally,a multi-reactor series model is developed to characterize the temperature distribution within the fluidized bed reactor.The accuracy in predicting melt index and density of the polymer,and the dynamic behavior of the developed models are verified by real plant data.Moreover,the dynamic simulation platform is applied to compare four practical control schemes for reactor temperature by a series of simulation experiments,since temperature control is important in industrial production.The results reveal that all four schemes effectively track the setpoint temperature.However,only the demineralized water temperature cascade control demonstrates excellent performance in handling disturbances from both the recycle gas subsystem and the heat exchange subsystem.展开更多
The rheological properties and limited flow velocities of solvent-free nanofluids are crucial for their technologically significant applications.In particular,the flow in a solvent-free nanofluid system is steady only...The rheological properties and limited flow velocities of solvent-free nanofluids are crucial for their technologically significant applications.In particular,the flow in a solvent-free nanofluid system is steady only when the flow velocity is lower than a critical value.In this paper,we establish a rigid-flexible dynamic model to investigate the existence of the upper bound on the steady flow velocities for three solvent-free nanofluid systems.Then,the effects of the structural parameters on the upper bound on the steady flow velocities are examined with the proposed structure-preserving method.It is found that each of these solvent-free nanofluid systems has an upper bound on the steady flow velocity,which exhibits distinct dependence on their structural parameters,such as the graft density of branch chains and the size of the cores.In addition,among the three types of solvent-free nanofluids,the magnetic solvent-free nanofluid poses the largest upper bound on the steady flow velocity,demonstrating that it is a better choice when a large flow velocity is required in real applications.展开更多
In recent years, metallurgical slags have been increasingly used as materials for the manufacture of cement, pavement and filling material. The transport of the molten slag to the receiving pots is carried out through...In recent years, metallurgical slags have been increasingly used as materials for the manufacture of cement, pavement and filling material. The transport of the molten slag to the receiving pots is carried out through open channels. The transient and steady-state flow of a molten slag in a rectangular open channel is numerically analyzed here. For the transient flow, the Saint-Venant equations were numerically solved. For the steady-state flow, the derivatives in time and space in the Saint-Venant equations were set equal to zero and a polynomial of degree 3 is obtained whose roots are the slag height values. It was assumed that the viscosity of the slag has an Arrhenius-type behavior with temperature. Four values of temperature values, namely 1723.15, 1773.15, 1823.15, 18873.15 ˚K, and five values of the angle of inclination of the channel, namely 1, 2, 3, 4, 5 degrees, are considered. Numerical results show that the steady-state values of the height and velocity of the molten slag depend strongly on the temperature of the slag and the angle of inclination of the channel. As the slag temperature and channel angle increase, the value of the steady-state slag height decreases. The value of the steady-state slag velocity increases as the slag temperature and channel inclination angle increase.展开更多
基金supported by the National Natural Science Foundation of China (No. 12205150)Natural Science Foundation of Jiangsu Province (No. BK20210304)+1 种基金China Postdoctoral Science Foundation (Nos. 2020M681594 and 2019TQ0148)Jiangsu Province Postdoctoral Science Foundation (Nos. 2020Z231)
文摘Small modular reactors have received widespread attention owing to their inherent safety,low investment,and flexibility.Small pressurized water reactors(SPWRs)have become important candidates for SMRs owing to their high technological maturity.Since the Fukushima accident,research on accident-tolerant fuels(ATFs),which are more resistant to serious accidents than conventional fuels,has gradually increased.This study analyzes the neutronics and thermal hydraulics of an SPWR(ACPR50S)for different ATFs,BeO+UO_(2)−SiC,BeO+UO_(2)−FeCrAl,U_(3)Si_(2)−SiC,and U_(3)Si_(2)−FeCrAl,based on a PWR fuel management code,the Bamboo-C deterministic code.In the steady state,the burnup calculations,reactivity coefficients,power and temperature distributions,and control rod reactivity worth were studied.The transients of the control rod ejection accident for the two control rods with the maximum and minimum reactivity worth were analyzed.The results showed that 5%B-10 enrichment in the wet annular burnable absorbers assembly can effectively reduce the initial reactivity and end-of-life reactivity penalty.The BeO+UO2−SiC core exhibited superior neutronic characteristics in terms of burnup and negative temperature reactivity compared with the other three cases owing to the strong moderation ability of BeO+UO_(2)and low neutron absorption of SiC.However,the U_(3)Si_(2)core had a marginally better power-flattening effect than BeO+UO_(2),and the differential worth of each control rod group was similar between different ATFs.During the transient of a control rod ejection,the changes in the fuel temperature,coolant temperature,and coolant density were similar.The maximum difference was less than 10℃ for the fuel temperature and 2℃ for the coolant temperature.
文摘In the 12 years since the Belt and Road Initiative was first proposed,many Chinese enterprises have made fruitful achievements in the participating countries of the Belt and Road Initiative.
基金supported by the Natural Sciences and Engineering Research Council of Canada
文摘Background:The isometric steady-state following active lengthening is associated with greater torque production and lower activation,as measured by electromyographic activity(EMG),in comparison with a purely isometric contraction(ISO)at the same joint angle.This phenomenon is termed residual force enhancement(RFE).While there has been a great deal of research investigating the basic mechanisms of RFE,little work has been performed to understand the everyday relevance of RFE.The purpose of this study was to investigate whether neuromuscular control strategies differ between ISO and RFE by measuring torque steadiness of the human ankle plantar flexors.Methods:Following ISO maximal voluntary contractions in 12 males(25±4 years),an active lengthening contraction was performed at 15°/s over a 30°ankle excursion,ending at the same joint angle as ISO(5°dorsiflexion;RFE).Surface EMG of the tibialis anterior and soleus muscles was recorded during all tasks.Torque steadiness was determined as the standard deviation(SD)and coefficient of variation(CV)of the torque trace in the ISO and RFE condition during activation-matching(20%and 60%integrated EMG)and torque-matching(20%and 60%maximal voluntary contraction)experiments.Two-tailed,paired t tests were used,within subjects,to determine the presence of RFE/activation reduction(AR)and whether there was a difference in torque steadiness between ISO and RFE conditions.Results:During the maximal and submaximal conditions,there was 5%-9%RFE with a 9%-11%AR(p<0.05),respectively,with no difference in antagonist coactivation between RFE and ISO(p>0.05).There were no differences in SD and CV of the torque trace for the 20%and60%activation-matching or the 60%and maximal torque-matching trials in either the RFE or ISO condition(p>0.05).During the 20%torquematching trial,there were～37%higher values for SD and CV in the RFE as compared with the ISO condition(p<0.05).A significant moderate-to-strong negative relationship was identified between the reduction in torque steadiness following active lengthening and the accompanying AR(p<0.05).Conclusion:It appears that while the RFE-associated AR provides some improved neuromuscular economy,this comes at the cost of increased torque fluctuations in the isometric steady-state following active lengthening during submaximal contractions.
文摘Understanding the steady mechanism of biomass smoldering plays a great role in the utilization of smoldering technology.In this study numerical analysis of steady smoldering of biomass rods was performed.A two-dimensional(2D)steady model taking into account both char oxidation and pyrolysis was developed on the basis of a calculated propagation velocity according to empirical correlation.The model was validated against the smoldering experiment of biomass rods under natural conditions,and the maximum error was smaller than 31%.Parameter sensitivity analysis found that propagation velocity decreases significantly while oxidation area and pyrolysis zone increase significantly with the increasing diameter of rod fuel.
基金financial support provided by the Project of the National Key Research and Development Program of China(2018YFA0704601)the National Natural Science Foundation of China(U22A20415,22308314)+1 种基金the Natural Science Foundation of Zhejiang Province,China(LQ24B060001)the“Pioneer”and“Leading Goose”Research and Development Program of Zhejiang,China(2022C01SA442617)are gratefully acknowledged.
文摘Gas-phase polyethylene(PE)processes are among the most important methods for PE production.A deeper understanding of the process characteristics and dynamic behavior,such as properties of PE and reactor stability,holds substantial interest for both academic researchers and industries.In this study,both steady-state and dynamic models for a gas-phase polyethylene process are established as a simulation platform,which can be used to study a variety of operation tasks for commercial solution polyethylene processes,such as new product development,process control and real-time optimization.The copolymerization kinetic parameters are fitted by industrial data.Additionally,a multi-reactor series model is developed to characterize the temperature distribution within the fluidized bed reactor.The accuracy in predicting melt index and density of the polymer,and the dynamic behavior of the developed models are verified by real plant data.Moreover,the dynamic simulation platform is applied to compare four practical control schemes for reactor temperature by a series of simulation experiments,since temperature control is important in industrial production.The results reveal that all four schemes effectively track the setpoint temperature.However,only the demineralized water temperature cascade control demonstrates excellent performance in handling disturbances from both the recycle gas subsystem and the heat exchange subsystem.
基金Project supported by the National Natural Science Foundation of China(No.12172281)the Fund of the Science and Technology Innovation Team of Shaanxi Province of China(No.2022TD-61)+2 种基金the Open Project of State Key Laboratory of Performance Monitoring and Protecting of Rail Transit InfrastructureEast China Jiaotong University(No.HJGZ2023102)the Shaanxi Province Key Research and Development Project(No.2024SFYBXM-531)。
文摘The rheological properties and limited flow velocities of solvent-free nanofluids are crucial for their technologically significant applications.In particular,the flow in a solvent-free nanofluid system is steady only when the flow velocity is lower than a critical value.In this paper,we establish a rigid-flexible dynamic model to investigate the existence of the upper bound on the steady flow velocities for three solvent-free nanofluid systems.Then,the effects of the structural parameters on the upper bound on the steady flow velocities are examined with the proposed structure-preserving method.It is found that each of these solvent-free nanofluid systems has an upper bound on the steady flow velocity,which exhibits distinct dependence on their structural parameters,such as the graft density of branch chains and the size of the cores.In addition,among the three types of solvent-free nanofluids,the magnetic solvent-free nanofluid poses the largest upper bound on the steady flow velocity,demonstrating that it is a better choice when a large flow velocity is required in real applications.
文摘In recent years, metallurgical slags have been increasingly used as materials for the manufacture of cement, pavement and filling material. The transport of the molten slag to the receiving pots is carried out through open channels. The transient and steady-state flow of a molten slag in a rectangular open channel is numerically analyzed here. For the transient flow, the Saint-Venant equations were numerically solved. For the steady-state flow, the derivatives in time and space in the Saint-Venant equations were set equal to zero and a polynomial of degree 3 is obtained whose roots are the slag height values. It was assumed that the viscosity of the slag has an Arrhenius-type behavior with temperature. Four values of temperature values, namely 1723.15, 1773.15, 1823.15, 18873.15 ˚K, and five values of the angle of inclination of the channel, namely 1, 2, 3, 4, 5 degrees, are considered. Numerical results show that the steady-state values of the height and velocity of the molten slag depend strongly on the temperature of the slag and the angle of inclination of the channel. As the slag temperature and channel angle increase, the value of the steady-state slag height decreases. The value of the steady-state slag velocity increases as the slag temperature and channel inclination angle increase.
