Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditio...Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditional teaching,this paper proposes curriculum teaching reform based on the outcome-based education(OBE)concept,including determining course objectives,reforming teaching modes and methods,and improving the curriculum assessment and evaluation system.After two semesters of practice,this method not only enhances students’learning initiative but also improves teaching quality.展开更多
Complex engineered systems are often difficult to analyze and design due to the tangled interdependencies among their subsystems and components. Conventional design methods often need exact modeling or accurate struct...Complex engineered systems are often difficult to analyze and design due to the tangled interdependencies among their subsystems and components. Conventional design methods often need exact modeling or accurate structure decomposition, which limits their practical application. The rapid expansion of data makes utilizing data to guide and improve system design indispensable in practical engineering. In this paper, a data driven uncertainty evaluation approach is proposed to support the design of complex engineered systems. The core of the approach is a data-mining based uncertainty evaluation method that predicts the uncertainty level of a specific system design by means of analyzing association relations along different system attributes and synthesizing the information entropy of the covered attribute areas, and a quantitative measure of system uncertainty can be obtained accordingly. Monte Carlo simulation is introduced to get the uncertainty extrema, and the possible data distributions under different situations is discussed in detail.The uncertainty values can be normalized using the simulation results and the values can be used to evaluate different system designs. A prototype system is established, and two case studies have been carried out. The case of an inverted pendulum system validates the effectiveness of the proposed method, and the case of an oil sump design shows the practicability when two or more design plans need to be compared. This research can be used to evaluate the uncertainty of complex engineered systems completely relying on data, and is ideally suited for plan selection and performance analysis in system design.展开更多
Non-obstacle design is critical to tailor physically handicapped workers in manufacturing system. Simultaneous consideration of variability in physically disabled users, machines and environment of the manufacturing s...Non-obstacle design is critical to tailor physically handicapped workers in manufacturing system. Simultaneous consideration of variability in physically disabled users, machines and environment of the manufacturing system is extremely complex and generally requires modeling of physically handicapped interaction with the system. Most current modeling either concentrates on the task results or functional disability. The integration of physical constraints with task constraints is far more complex because of functional disability and its extended influence on adjacent body parts. A framework is proposed to integrate the two constraints and thus model the specific behavior of the physical handicapped in virtual environment generated by product specifications. Within the framework a simplified model of physical disabled body is constructed, and body motion is generated based on 3 levels of constraints(effecter constraints, kinematics constraints and physical constraints). The kinematics and dynamic calculations are made and optimized based on the weighting manipulated by the kinematics constraints and dynamic constraints. With object transferring task as example, the model is validated in Jack 6.0. Modelled task motion elements except for squatting and overreaching well matched with captured motion elements. The proposed modeling method can model the complex behavior of the physically handicapped by integrating both task and physical disability constraints.展开更多
This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of 'computer-aided control system design' (CACSD) to novel...This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of 'computer-aided control system design' (CACSD) to novel 'computer-automated control system design' (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.展开更多
This paper introduced the design of the hybrid powertrain of the Fuel Cell City Bus demonstrated in 2008 Beijing Olympic Games. The configuration of the hybrid fuel cell powertrain was introduced. The safety of hydrog...This paper introduced the design of the hybrid powertrain of the Fuel Cell City Bus demonstrated in 2008 Beijing Olympic Games. The configuration of the hybrid fuel cell powertrain was introduced. The safety of hydrogen storage and delivery system, the hydrogen leakage alarm system were developed. The real-time distributed control and diagnosis system based on the Time Trigger Controller Area Network (TTCAN) with 10 ms basic control period was developed. The concept and implementation of processor (or controller) monitor and process (or task) monitor technique based on the TTCAN were applied in this paper. The fault tolerant control algorithm of the fuel cell engine and the battery management system were considered. The demonstration experience verified that the fault tolerant control was very important for the fuel cell city bus.展开更多
Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling lo...Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling load.So the two factors should be taken into account when selecting the weather parameters for air-conditioning system design.This paper developed a new statistic method for the rational selection of coincident solar irradiance,dry-bulb and wet-bulb temperatures.The method was applied to historic weather records of 25 years in Hong Kong to generate coincident design weather data.And the results show that traditional design solar irradiance,dry-bulb and wet-bulb temperatures may be significantly overestimated in many conditions,and the design weather data for the three different constructions is not kept constant.展开更多
A hybrid approach for fuzzy system design based on clustering and a kind of neurofuzzy networks is proposed. An unsupervised clustering technique is firstly used to determine the number of if-then fuzzy rules and gene...A hybrid approach for fuzzy system design based on clustering and a kind of neurofuzzy networks is proposed. An unsupervised clustering technique is firstly used to determine the number of if-then fuzzy rules and generate an initial fuzzy rule base from the given input-output data. Then, a class of neurofuzzy networks is constructed and its weights are tuned so that the obtained fuzzy rule base has a high accuracy. Finally, two examples of function approximation problems are given to illustrate the effectiveness of the proposed approach.展开更多
This paper introduces the supply mode of medical products, and analyzes the development trend of medical products supply enterprise in China. From the aspects of basic management, resource integration and database des...This paper introduces the supply mode of medical products, and analyzes the development trend of medical products supply enterprise in China. From the aspects of basic management, resource integration and database design, we put forward the design concept of the informationization of the supply chain system of medical products in China. The information system can ensure the precision and rationality of the supply of medical products, and provide high-quality services and service efficiency, and meet the different needs of different customers.展开更多
This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structure...This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structures and their accompanying rules. With the net models, the hierarchical and distributed control system is designed for an assembly task. Synchronization commands allow coordination of the movements of the robots. The net models make concurrency of the movements of the robots transparent to users. The net based machine controller executes robot motion control through the communication with the external robot controller using the command/response concept. Sensory signals indicating the change of state of robots are used to trigger or initiate tasks. Simultaneous movement of the robots is obtained by creating different background threads running in parallel under Windows OS. The multilevel hierarchical control system can be consistently constructed using net models.展开更多
There has been an increasing interest in integrating decision support systems (DSS) and expert systems (ES) to provide decision makers a more accessible, productive and domain-independent information and computing env...There has been an increasing interest in integrating decision support systems (DSS) and expert systems (ES) to provide decision makers a more accessible, productive and domain-independent information and computing environment. This paper is aimed at designing a multiple expert systems integrated decision support system (MESIDSS) to enhance decision makers’ ability in more complex cases. The basic framework, management system of multiple ESs, and functions of MESIDSS are presented. The applications of MESIDSS in large-scale decision making processes are discussed from the following aspects of problem decomposing, dynamic combination of multiple ESs, link of multiple bases and decision coordinating. Finally, a summary and some ideas for the future are presented.展开更多
An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design,optimization design, dynamic and static characteristi...An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design,optimization design, dynamic and static characteristics, and visual simulation. All empirical parameters and curves used in design process are stored in database. Through human-computer interactions, an electromagnetic system can be designed conveniently with the results and characteristics curves displayed in graphic model. Using this system can greatly shorten the process of product design, and the results satisfy technical requirements.展开更多
There are two main opposing views in the wireless industry on the feasibility of developing 5th generation(5G) cellular networks in mm-Wave bands. The optimistic view is based on the fact that the path loss in mm Wave...There are two main opposing views in the wireless industry on the feasibility of developing 5th generation(5G) cellular networks in mm-Wave bands. The optimistic view is based on the fact that the path loss in mm Wave bands is not significantly worse than that in cellular bands when beamforming gain is also considered. The cautious view points out the significant blockage issues due to the lack of diffraction and adequate penetration in mm Wave bands. The implementation of 5G mm Wave cellular networks also faces major challenges due to the high link budget needed for long- range communication and the strong dependency on beamforming technology. This paper addresses some of these fundamental technology issues, from mm Wave channel characters and channel modeling to the implications on system and network architecture design.Although we believe that mm Wave can be used for 5G networks, we show that the air interface, device and network design will be very different from existing cellular design.展开更多
By analysis of the functions of animal hospital's departments,combining with management information development truth,the paper developed animal hospital management system.The system included six modules,like syst...By analysis of the functions of animal hospital's departments,combining with management information development truth,the paper developed animal hospital management system.The system included six modules,like system management module,basic information management module,sections management module,and so on.The paper used Visual C++6.0 and SQL Server 2000,and ODBC database accessing technology,which can encapsulate any database table and operation into class.The system could make any window to share table's operation to realize hospital management quickly and efficiency.展开更多
Aiming at reducing the difficulty of cooling the interior of high-density motors,this study proposed the placement of a water cold plate cooling structure between the axial laminations of the motor stator.The effect o...Aiming at reducing the difficulty of cooling the interior of high-density motors,this study proposed the placement of a water cold plate cooling structure between the axial laminations of the motor stator.The effect of the cooling water flow,thickness of the plate,and motor loss density on the cooling effect of the water cold plate were studied.To compare the cooling performance of water cold plate and outer spiral water jacket cooling structures,a high-speed permanent magnet motor with a high loss density was used to establish two motor models with the two cooling structures.Consequently,the cooling effects of the two models were analyzed using the finite element method under the same loss density,coolant flow,and main dimensions.The results were as follows.(1)The maximum and average temperatures of the water cold plate structure were reduced by 25.5%and 30.5%,respectively,compared to that of the outer spiral water jacket motor;(2)Compared with the outer spiral water jacket structure,the water cold plate structure can reduce the overall mass and volume of the motor.Considering a 100 kW high-speed permanent magnet motor as an example,a water cold plate cooling system was designed,and the temperature distribution is analyzed,with the result indicating that the cooling structure satisfied the cooling requirements of the high loss density motor.展开更多
System analysis and design (SAD) is a crucial process in the development of software systems. The impact of modeling techniques and software engineering practices on SAD has been the focus of research for many years. ...System analysis and design (SAD) is a crucial process in the development of software systems. The impact of modeling techniques and software engineering practices on SAD has been the focus of research for many years. Two such techniques that have had a significant impact on SAD are Unified Modeling Language (UML) and machine learning. UML has been used to model the structure and behavior of software systems, while machine learning has been used to automatically learn patterns in data and make predictions. The purpose of this paper is to review the literature on the impact of UML and machine learning on SAD. We summarize the findings from several studies and highlight the key insights related to the benefits and limitations of these techniques for SAD. Our review shows that both UML and machine learning have had a positive impact on SAD, with UML improving communication and documentation, and machine learning improving the accuracy of predictions. However, there are also challenges associated with their use, such as the need for expertise and the difficulty of interpreting machine learning models. Our findings suggest that a combination of UML and machine learning can enhance SAD by leveraging the strengths of each technique.展开更多
基金This paper is one of the phased achievements of the Education and Teaching Reform Project of Guangdong University of Petrochemical Engineering in 2022(71013413080)the Research and Practice Project of Teaching and Teaching Reform of University-Level Higher Vocational Education in 2023(JY202353).
文摘Embedded system design is the core course of the telecommunication major in engineering universities,which combines software and hardware through embedded development boards.Aiming at the problems existing in traditional teaching,this paper proposes curriculum teaching reform based on the outcome-based education(OBE)concept,including determining course objectives,reforming teaching modes and methods,and improving the curriculum assessment and evaluation system.After two semesters of practice,this method not only enhances students’learning initiative but also improves teaching quality.
基金Supported by National Hi-tech Research and Development Program of China(863 Program,Grant No.2015AA042101)
文摘Complex engineered systems are often difficult to analyze and design due to the tangled interdependencies among their subsystems and components. Conventional design methods often need exact modeling or accurate structure decomposition, which limits their practical application. The rapid expansion of data makes utilizing data to guide and improve system design indispensable in practical engineering. In this paper, a data driven uncertainty evaluation approach is proposed to support the design of complex engineered systems. The core of the approach is a data-mining based uncertainty evaluation method that predicts the uncertainty level of a specific system design by means of analyzing association relations along different system attributes and synthesizing the information entropy of the covered attribute areas, and a quantitative measure of system uncertainty can be obtained accordingly. Monte Carlo simulation is introduced to get the uncertainty extrema, and the possible data distributions under different situations is discussed in detail.The uncertainty values can be normalized using the simulation results and the values can be used to evaluate different system designs. A prototype system is established, and two case studies have been carried out. The case of an inverted pendulum system validates the effectiveness of the proposed method, and the case of an oil sump design shows the practicability when two or more design plans need to be compared. This research can be used to evaluate the uncertainty of complex engineered systems completely relying on data, and is ideally suited for plan selection and performance analysis in system design.
基金supported by National Natural Science Foundation of China(Grant No. 60975058)
文摘Non-obstacle design is critical to tailor physically handicapped workers in manufacturing system. Simultaneous consideration of variability in physically disabled users, machines and environment of the manufacturing system is extremely complex and generally requires modeling of physically handicapped interaction with the system. Most current modeling either concentrates on the task results or functional disability. The integration of physical constraints with task constraints is far more complex because of functional disability and its extended influence on adjacent body parts. A framework is proposed to integrate the two constraints and thus model the specific behavior of the physical handicapped in virtual environment generated by product specifications. Within the framework a simplified model of physical disabled body is constructed, and body motion is generated based on 3 levels of constraints(effecter constraints, kinematics constraints and physical constraints). The kinematics and dynamic calculations are made and optimized based on the weighting manipulated by the kinematics constraints and dynamic constraints. With object transferring task as example, the model is validated in Jack 6.0. Modelled task motion elements except for squatting and overreaching well matched with captured motion elements. The proposed modeling method can model the complex behavior of the physically handicapped by integrating both task and physical disability constraints.
文摘This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of 'computer-aided control system design' (CACSD) to novel 'computer-automated control system design' (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.
文摘This paper introduced the design of the hybrid powertrain of the Fuel Cell City Bus demonstrated in 2008 Beijing Olympic Games. The configuration of the hybrid fuel cell powertrain was introduced. The safety of hydrogen storage and delivery system, the hydrogen leakage alarm system were developed. The real-time distributed control and diagnosis system based on the Time Trigger Controller Area Network (TTCAN) with 10 ms basic control period was developed. The concept and implementation of processor (or controller) monitor and process (or task) monitor technique based on the TTCAN were applied in this paper. The fault tolerant control algorithm of the fuel cell engine and the battery management system were considered. The demonstration experience verified that the fault tolerant control was very important for the fuel cell city bus.
文摘Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling load.So the two factors should be taken into account when selecting the weather parameters for air-conditioning system design.This paper developed a new statistic method for the rational selection of coincident solar irradiance,dry-bulb and wet-bulb temperatures.The method was applied to historic weather records of 25 years in Hong Kong to generate coincident design weather data.And the results show that traditional design solar irradiance,dry-bulb and wet-bulb temperatures may be significantly overestimated in many conditions,and the design weather data for the three different constructions is not kept constant.
基金This project was supported by the National Natural Science Foundation of China (60141002).
文摘A hybrid approach for fuzzy system design based on clustering and a kind of neurofuzzy networks is proposed. An unsupervised clustering technique is firstly used to determine the number of if-then fuzzy rules and generate an initial fuzzy rule base from the given input-output data. Then, a class of neurofuzzy networks is constructed and its weights are tuned so that the obtained fuzzy rule base has a high accuracy. Finally, two examples of function approximation problems are given to illustrate the effectiveness of the proposed approach.
文摘This paper introduces the supply mode of medical products, and analyzes the development trend of medical products supply enterprise in China. From the aspects of basic management, resource integration and database design, we put forward the design concept of the informationization of the supply chain system of medical products in China. The information system can ensure the precision and rationality of the supply of medical products, and provide high-quality services and service efficiency, and meet the different needs of different customers.
文摘This paper deals with control system design and implementation problems encountered in multiple robot systems. The methodology developed is depicted by a set of coordination mechanisms using hierarchical net structures and their accompanying rules. With the net models, the hierarchical and distributed control system is designed for an assembly task. Synchronization commands allow coordination of the movements of the robots. The net models make concurrency of the movements of the robots transparent to users. The net based machine controller executes robot motion control through the communication with the external robot controller using the command/response concept. Sensory signals indicating the change of state of robots are used to trigger or initiate tasks. Simultaneous movement of the robots is obtained by creating different background threads running in parallel under Windows OS. The multilevel hierarchical control system can be consistently constructed using net models.
文摘There has been an increasing interest in integrating decision support systems (DSS) and expert systems (ES) to provide decision makers a more accessible, productive and domain-independent information and computing environment. This paper is aimed at designing a multiple expert systems integrated decision support system (MESIDSS) to enhance decision makers’ ability in more complex cases. The basic framework, management system of multiple ESs, and functions of MESIDSS are presented. The applications of MESIDSS in large-scale decision making processes are discussed from the following aspects of problem decomposing, dynamic combination of multiple ESs, link of multiple bases and decision coordinating. Finally, a summary and some ideas for the future are presented.
文摘An electromagnet design system is developed using Visual C++ language and OpenGL technology to visualize parametric 3D model. The system consists of primary design,optimization design, dynamic and static characteristics, and visual simulation. All empirical parameters and curves used in design process are stored in database. Through human-computer interactions, an electromagnetic system can be designed conveniently with the results and characteristics curves displayed in graphic model. Using this system can greatly shorten the process of product design, and the results satisfy technical requirements.
文摘There are two main opposing views in the wireless industry on the feasibility of developing 5th generation(5G) cellular networks in mm-Wave bands. The optimistic view is based on the fact that the path loss in mm Wave bands is not significantly worse than that in cellular bands when beamforming gain is also considered. The cautious view points out the significant blockage issues due to the lack of diffraction and adequate penetration in mm Wave bands. The implementation of 5G mm Wave cellular networks also faces major challenges due to the high link budget needed for long- range communication and the strong dependency on beamforming technology. This paper addresses some of these fundamental technology issues, from mm Wave channel characters and channel modeling to the implications on system and network architecture design.Although we believe that mm Wave can be used for 5G networks, we show that the air interface, device and network design will be very different from existing cellular design.
基金conducted within the framework of the project LNG-COMSHIP,Greek General Secretariat of Research and Technology Code:12CHN400,and was funded by the European Regional Development Fund(ERDF) and National Resources
文摘By analysis of the functions of animal hospital's departments,combining with management information development truth,the paper developed animal hospital management system.The system included six modules,like system management module,basic information management module,sections management module,and so on.The paper used Visual C++6.0 and SQL Server 2000,and ODBC database accessing technology,which can encapsulate any database table and operation into class.The system could make any window to share table's operation to realize hospital management quickly and efficiency.
基金supported by the National Natural Science Foundation of China(51920105011)Natural Science Foundation of Liaoning Province(2021-YQ-09)Liaoning Bai Qian Wan Talents Program,China.
文摘Aiming at reducing the difficulty of cooling the interior of high-density motors,this study proposed the placement of a water cold plate cooling structure between the axial laminations of the motor stator.The effect of the cooling water flow,thickness of the plate,and motor loss density on the cooling effect of the water cold plate were studied.To compare the cooling performance of water cold plate and outer spiral water jacket cooling structures,a high-speed permanent magnet motor with a high loss density was used to establish two motor models with the two cooling structures.Consequently,the cooling effects of the two models were analyzed using the finite element method under the same loss density,coolant flow,and main dimensions.The results were as follows.(1)The maximum and average temperatures of the water cold plate structure were reduced by 25.5%and 30.5%,respectively,compared to that of the outer spiral water jacket motor;(2)Compared with the outer spiral water jacket structure,the water cold plate structure can reduce the overall mass and volume of the motor.Considering a 100 kW high-speed permanent magnet motor as an example,a water cold plate cooling system was designed,and the temperature distribution is analyzed,with the result indicating that the cooling structure satisfied the cooling requirements of the high loss density motor.
文摘System analysis and design (SAD) is a crucial process in the development of software systems. The impact of modeling techniques and software engineering practices on SAD has been the focus of research for many years. Two such techniques that have had a significant impact on SAD are Unified Modeling Language (UML) and machine learning. UML has been used to model the structure and behavior of software systems, while machine learning has been used to automatically learn patterns in data and make predictions. The purpose of this paper is to review the literature on the impact of UML and machine learning on SAD. We summarize the findings from several studies and highlight the key insights related to the benefits and limitations of these techniques for SAD. Our review shows that both UML and machine learning have had a positive impact on SAD, with UML improving communication and documentation, and machine learning improving the accuracy of predictions. However, there are also challenges associated with their use, such as the need for expertise and the difficulty of interpreting machine learning models. Our findings suggest that a combination of UML and machine learning can enhance SAD by leveraging the strengths of each technique.
