The production and utilization of high-energetic explosives often pose a range of safety hazards,with sensitivity being a key factor in evaluating these risks.To investigate how temperature,particle size,and air humid...The production and utilization of high-energetic explosives often pose a range of safety hazards,with sensitivity being a key factor in evaluating these risks.To investigate how temperature,particle size,and air humidity affect the responsiveness of commonly used high-energetic explosives,a series of BAM(Bundesanstalt für Materialforschung und-prüfung)impact and friction sensitivity tests were carried out to determine the critical impact energy and critical load pressure of four representative high-energetic explosives(RDX,HMX,PETN and CL-20)under different temperatures,particle sizes,and air humidity conditions.The experimental findings facilitated an examination of temperature and particle size affecting the sensitivity of high-energetic explosives,along with an assessment of the influence of air humidity on sensitivity testing.The results clearly indicate that high-energetic explosives display a substantial decline in critical reaction energy when subjected to micrometre-sized particles and an air humidity level of 45%at a temperature of 90℃.Furthermore,it was noted that the critical reaction energy of high-energetic explosives diminishes with an increase in temperature within 25℃−90℃.In the same vein,as the particle sizes of high-energetic explosives increase,so does the critical reaction energy for micrometre-sized particles.High air humidity significantly affects the sensitivity testing of high-energetic explosives,emphasizing the importance of refraining from conducting sensitivity tests in such conditions.展开更多
High-temperature thin-film thermocouples(TFTCs)have attracted significant attention in the aerospace and steel metallurgy industry.However,previous studies on TFTCs have primarily focused on the two-dimensional planar...High-temperature thin-film thermocouples(TFTCs)have attracted significant attention in the aerospace and steel metallurgy industry.However,previous studies on TFTCs have primarily focused on the two-dimensional planar-type,whose thermal sensitive area has to be perpendicular to the test environment,and therefore affects the thermal fluids pattern or loses accuracy.In order to address this problem,recent studies have developed three-dimensional probe-type TFTCs,which can be set parallel to the test environment.Nevertheless,the probe-type TFTCs are limited by their measurement threshold and poor stability at high temperatures.To address these issues,in this study,we propose a novel probe-type TFTC with a sandwich structure.The sensitive layer is compounded with indium oxide doped zinc oxide and fabricated using screen-printing technology.With the protection of sandwich structure on electrode film,the sensor demonstrates robust high-temperature stability,enabling continuous working at 1200℃ above 5 h with a low drift rate of 2.3℃·h^(−1).This sensor exhibits a high repeatability of 99.3% when measuring a wide range of temperatures,which is beyond the most existing probe-type TFTCs reported in the literature.With its excellent high-temperature performance,this temperature sensor holds immense potentials for enhancing equipment safety in the aerospace engineering and ensuring product quality in the steel metallurgy industry.展开更多
Submicron scale temperature sensors are crucial for a range of applications,particularly in micro and na-noscale environments.One promising solution involves the use of active whispering gallery mode(WGM)microresonato...Submicron scale temperature sensors are crucial for a range of applications,particularly in micro and na-noscale environments.One promising solution involves the use of active whispering gallery mode(WGM)microresonators.These resonators can be remotely excited and read out using free-space structures,simplifying the process of sensing.In this study,we present a submicron-scale temperature sensor with a remarkable sensitivity up to 185 pm/℃based on a trian-gular MAPbI3 nanoplatelet(NPL)laser.Notably,as temperature changes,the peak wavelength of the laser line shifts lin-early.This unique characteristic allows for precise temperature sensing by tracking the peak wavelength of the NPL laser.The optical modes are confined within the perovskite NPL,which measures just 85 nm in height,due to total internal reflec-tion.Our NPL laser boasts several key features,including a high Q of~2610 and a low laser threshold of about 19.8μJ·cm^(−2).The combination of exceptional sensitivity and ultra-small size makes our WGM device an ideal candidate for integration into systems that demand compact temperature sensors.This advancement paves the way for significant prog-ress in the development of ultrasmall temperature sensors,opening new possibilities across various fields.展开更多
The development and character of compound temperature-humidity sensor were discussed in this study.The design of sampling,control and output unit of temperature-humidity sensor as well as their manufacture method and ...The development and character of compound temperature-humidity sensor were discussed in this study.The design of sampling,control and output unit of temperature-humidity sensor as well as their manufacture method and character were studied in detail.The relationship between components of humidity resistance materials and negative temperature coefficient ( NTC) thermistor materials in sampling unit of compound sensor and character of electrical resistance and temperature was obtained.Couples of character curves of compound temperature-humidity sensor and data of materials of sampling unit were shown in this paper too.展开更多
There is a growing interest in using miniature multi-sensor technology to monitor plant, soil, and environmental conditions in greenhouses and in field settings. The objectives of this study were to build a small mult...There is a growing interest in using miniature multi-sensor technology to monitor plant, soil, and environmental conditions in greenhouses and in field settings. The objectives of this study were to build a small multi-channel sensing system with ability to measure visible and near infrared light reflectance, relative humidity, and temperature, to test the light reflectance sensors for measuring spectral characteristics of plant leaves and soilless media, and to compare results of the relative humidity and temperature sensors to identical measurement obtained from a greenhouse sensor. The sensing system was built with off-the-shelf miniature multispectral spectrometers and relative humidity and temperature sensors. The spectrometers were sensitive to visible, red-edge, and near infrared light. The system was placed in a greenhouse setting and used to obtain relative reflectance measurements of plant leaves and soilless media and to record temperature and relative humidity conditions in the greenhouse. The spectrometer data obtained from plant leaf and soilless media were compatible with baseline spectral data collected with a hyperspectral spectroradiometer. The greenhouse was equipped with a relative humidity and temperature sensor. The relative humidity and temperature sensor measurements from our sensor system were strongly correlated with the relative humidity and temperature results obtained with the greenhouse sensors...展开更多
Under the condition of high temperature, the effects of five cover patterns （clean tillage, film mulching, weed covering, branches and leaves covering and growing grass covering） on soil properties in young Phoebe b...Under the condition of high temperature, the effects of five cover patterns （clean tillage, film mulching, weed covering, branches and leaves covering and growing grass covering） on soil properties in young Phoebe boumei forest were in- vestigated. The results showed that the five cover patterns all showed significant ef- fects on soil properties in young Phoebe bournei forest under the condition of high temperature. Land cover increased land temperature in Phoebe boumei forest. Un- der the film mulching, the land temperature was increased most rapidly with the largest increment. However, weed covering, branches and leaves covering and growing grass covering decreased land temperature. Among them, growing grass covering showed the best cooling effect. The film mulching, weed covering, branch- es and leaves covering and growing grass covering all increased land humidity. The film mulching showed the best moisture-preserving effect in the early period, but in the late period, the humidity in the film mulching treatment group was lower than that in the clean tillage treatment group. Among the five mulching patterns, moisture loss in the film mulching treatment group was slowest and least, followed by those in the weed covering and branches and leaves covering treatment groups, and moisture loss in the growing grass covering treatment group was fastest and most.展开更多
In order to analyze the ventilation and cooling performance of single-tunnel plastic greenhouse in Yangtze-Huai region, the effects of two different ventilation modes （side window, side window＋roof window） on the t...In order to analyze the ventilation and cooling performance of single-tunnel plastic greenhouse in Yangtze-Huai region, the effects of two different ventilation modes （side window, side window＋roof window） on the temperature and humidity of plastic greenhouse were studied. The results showed that the ventilation mode of opening side window and roof window could effectively reduce the temperature and humidity at the plant canopy height, which was conducive to the growth of plant in greenhouse.展开更多
Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible ...Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible humidity sensors remains a challenge.In this work,a wearable capacitive-type Ga_(2)O_(3)/liquid metal-based humidity sensor is demonstrated by a one-step laser direct writing technique.Owing to the photothermal effect of laser,the Ga_(2)O_(3)-wrapped liquid metal particles can be selectively sintered and converted from insulative to conductive traces with a resistivity of 0.19Ω·cm,while the untreated regions serve as active sensing layers in response to moisture changes.Under 95%relative humidity,the humidity sensor displays a highly stable performance along with rapid response and recover time.Utilizing these superior properties,the Ga_(2)O_(3)/liquid metal-based humidity sensor is able to monitor human respiration rate,as well as skin moisture of the palm under different physiological states for healthcare monitoring.展开更多
Flexible temperature sensors have been extensively investigated due to their prospect of wide application in various flexible electronic products.However,most of the current flexible temperature sensors only work well...Flexible temperature sensors have been extensively investigated due to their prospect of wide application in various flexible electronic products.However,most of the current flexible temperature sensors only work well in a narrow temperature range,with their application at high or low temperatures still being a big challenge.This work proposes a flexible thermocouple temperature sensor based on aerogel blanket substrate,the temperature-sensitive layer of which uses the screen-printing technology to prepare indium oxide and indium tin oxide.It has good temperature sensitivity,with the test sensitivity reaching 226.7μV℃^(−1).Most importantly,it can work in a wide temperature range,from extremely low temperatures down to liquid nitrogen temperature to high temperatures up to 1200℃,which is difficult to be achieved by other existing flexible temperature sensors.This temperature sensor has huge application potential in biomedicine,aerospace and other fields.展开更多
Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to ...Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks,and for the early detection and treatment of diseases for home healthcare.Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable.Functionalized hydrogels are intrinsically conductive,self-healing,self-adhesive,biocompatible,and room-temperature sensitive.Compared with traditional rigid vapor sensors,hydrogel-based gas and humidity sensors can directly fit human skin or clothing,and are more suitable for real-time monitoring of personal health and safety.In this review,current studies on hydrogel-based vapor sensors are investigated.The required properties and optimization methods of wearable hydrogel-based sensors are introduced.Subsequently,existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized.Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented.Moreover,the potential of hydrogels in the field of vapor sensing is elucidated.Finally,the current research status,challenges,and future trends of hydrogel gas/humidity sensing are discussed.展开更多
A novel temperature and salinity discriminative sensing method based on forward Brillouin scattering(FBS)in 1060-XP single-mode fiber(SMF)is proposed.The measured frequency shifts corresponding to different radial aco...A novel temperature and salinity discriminative sensing method based on forward Brillouin scattering(FBS)in 1060-XP single-mode fiber(SMF)is proposed.The measured frequency shifts corresponding to different radial acoustic modes in 1060-XP SMF show different sensitivities to temperature and salinity.Based on the new phenomenon that different radial acoustic modes have different frequency shift-temperature and frequency shift-salinity coefficients,we propose a novel method for simultaneously measuring temperature and salinity by measuring the frequency shift changes of two FBS scattering peaks.In a proof-of-concept experiment,the temperature and salinity measurement errors are 0.12℃and 0.29%,respectively.The proposed method for simultaneously measuring temperature and salinity has the potential applications such as ocean surveying,food manufacturing and pharmaceutical engineering.展开更多
With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are ...With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.展开更多
Developing a calibration and collection system of platinum resistance temperature sensor using Python language environment can read the information returned by the serial port and automatically generate an"Temper...Developing a calibration and collection system of platinum resistance temperature sensor using Python language environment can read the information returned by the serial port and automatically generate an"Temperature Sensor Calibration Record Table"excel table with the current date as the file name.It can collect data from 10 platinum resistance temperature sensors at once,achieving automation and improving work efficiency.展开更多
The higher survival rates of Helicoverpa amigera larvae were usually observed after adverse climate which was related to extreme temperature （T） and relative humidity （RH） stresses in transgenic Bacillus thuringie...The higher survival rates of Helicoverpa amigera larvae were usually observed after adverse climate which was related to extreme temperature （T） and relative humidity （RH） stresses in transgenic Bacillus thuringiensis （Bt） cotton. The unstable resistance of Bt cotton to bollworms has been correlated with the reduced expression of CrylAc δ-endotoxin. The objective of this study was to investigate the effects of combined temperature and relative humidity stresses on the leaf CrylAc insecticidal protein expression during critical developmental stages. The study was undertaken on two transgenic cotton cultivars that share same parental background, Sikang 1 （a conventional cultivar） and Sikang 3 （a hybrid cultivar）, during the 2007 and 2008 growing seasons at the Yangzhou University Farm, Yangzhou, China. The study was arranged with two factors that consisted of temperature （two levels） and relative humidity （three levels）. The six T/RH treatments were 37℃/95%, 37℃/70%, 37℃/50%, 18℃/95%, 18℃/70%, and 18℃/50%. In 2007, the six treatments were imposed to the plants at peak flowering stage for 24 h; in 2008, the six treatments were applied to the plants at peak square, peak flowering, and peak boll stages for 48 h. The results of the study indicated that the leaf insecticidal protein expression in CrylAc was significantly affected by extreme temperature only at peak flowering stage, and by both extreme temperature and relative humidity during boll filling stage. The greatest reductions were observed when the stresses were applied at peak boll stage. In 2008, after 48 h stress treatment, the leaf Bt endotoxin expression reduced by 25.9-36.7 and 23.6-40.5% at peak boll stage, but only by 14.9-26.5 and 12.8-24.0% at peak flowering stage for Sikang 1 and Sikang 3, respectively. The greatest reduction was found under the low temperature combined with low relative humidity condition for both years. It is believed that the temperature and relative humidity stresses may be attributed to the reduced efficacy of Bt cotton in growing conditions in China, where extreme temperatures often increase up to 35-40℃ and/or decrease down to 15-20℃, and relative humidity may reach to 85-95% and/or reduce to 40-55% during the cotton growing season.展开更多
The effect of external roof shading on the spatial distribution of air temperature and relative humidity in a greenhouse(Tin and RHin) was evaluated under the arid climatic conditions of Riyadh City, Saudi Arabia. Two...The effect of external roof shading on the spatial distribution of air temperature and relative humidity in a greenhouse(Tin and RHin) was evaluated under the arid climatic conditions of Riyadh City, Saudi Arabia. Two identical, evaporatively-cooled, single-span greenhouses were used in the experiment. One greenhouse was externally shaded(Gs) using a movable black plastic net(30% transmissivity), and the other greenhouse was kept without shading(Gc). Strawberry plants were cultivated in both greenhouses. The results showed that the spatial distribution of the Tin and RHin was significantly affected by the outside solar radiation and evaporative cooling operation. The regression analysis showed that when the outside solar radiation intensity increased from 200 to 800 W m–2, the Tin increased by 4.5℃ in the Gc and 2℃in the Gs, while the RHin decreased by 15% in the Gc and 5% in the Gs, respectively. Compared with those in the Gc, more uniformity in the spatial distribution of the Tin and RHin was observed in the Gs. The difference between the maximum and minimum Tin of 6.4℃ and the RHin of 10% was lower in the Gs than those in the Gc during the early morning. Around 2℃ difference in the Tin was shown between the area closed to the exhausted fans and the area closed to the cooling pad with the external shading. In an evaporatively-cooled greenhouse in arid regions, the variation of the Tin and RHin in the vertical direction and along the sidewalls was much higher than that in the horizontal direction. The average variation of the Tin and RHin in the vertical direction was 5.2℃ and 10% in the Gc and 5.5℃ and 13% in the Gs, respectively. The external shading improved the spatial distribution of the Tin and RHin and improved the cooling efficiency of the evaporative cooling system by 12%, since the transmitted solar radiation and accumulated thermal energy in the greenhouse were significantly reduced.展开更多
Generally, the function of vocalizations made by male anurans are to attract females or defend resources. Typically, males vocalize in choruses during one or more periods in a twenty-four-hour cycle, which varies, how...Generally, the function of vocalizations made by male anurans are to attract females or defend resources. Typically, males vocalize in choruses during one or more periods in a twenty-four-hour cycle, which varies, however, among species. Nevertheless, the causal factors influencing circadian variations of calling patterns in anuran species are not clear. In this study, male chorus vocalizations were monitored in the Emei music frog(Babina daunchina) for 17 consecutive days during the breeding season, while its habitat air temperature and relative humidity in the course of experiments were measured as well. The results revealed that the circadian calling patterns were characterized by two periods of peak vocalization, which were observed from 0500 h to 0700 h and from 1300 h to 2000 h, while the lowest activity period was found from 2100 h to 2200 h. Both calls/h and notes/h were positively correlated with air temperature and negatively with relative humidity. Overall, our data indicate that the Emei music frogs(B. daunchina) could regulate their vocal activities based on the changes of physical micro-environment(e. g., temperature or humidity) to maximize reproductive success.展开更多
The cooling and humidifying effects of urban parks are an essential component of city ecosystems in terms of regulating microclimates or mitigating urban heat islands(UHIs).Air temperature and relative humidity are tw...The cooling and humidifying effects of urban parks are an essential component of city ecosystems in terms of regulating microclimates or mitigating urban heat islands(UHIs).Air temperature and relative humidity are two main factors of thermal environmental comfort and have a critical impact on the urban environmental quality of human settlements.We measured the 2-m height air temperature and relative humidity at the Beijing Olympic Park and a nearby building roof for more than 1 year to elucidate seasonal variations in air temperature and relative humidity,as well as to investigate the outdoor thermal comfort.The results showed that the lawn of the park could,on average,reduce the air temperature by(0.80±0.19)℃,and increase the relative humidity by(5.24±2.91)% relative to the values measured at the building roof during daytime.During the nighttime,the lawn of the park reduced the air temperature by(2.64±0.64)℃ and increased the relative humidity by(10.77±5.20)%.The park was cooler and more humid than surrounding building area,especially in night period(more pronounced cooling with 1.84℃).Additionally,the lawn of the park could improve outdoor thermal comfort through its cooling and humidifying effects.The level of thermal comfort in the park was higher than that around the building roof for a total of 11 days annually in which it was above one or more thermal comfort levels(average reduced human comfort index of 0.92)except during the winter.展开更多
The vertical migration of Aphelenchoides besseyi under different temperatures and humidities and at different rice growth stages was investigated. It was found that the optimum temperature for the development and repr...The vertical migration of Aphelenchoides besseyi under different temperatures and humidities and at different rice growth stages was investigated. It was found that the optimum temperature for the development and reproduction of A. besseyiwas 25-30℃. At the same temperature, the rate of vertical migration increased with rising relative humidity. Artificial inoculation tests showed that at the elongation stage, nematodes survived mainly on the upper and middle parts of rice culms and the number of nematodes decreased by 50% at 20 days after inoculation compared with that at 5 days after inoculation. Whereas at the booting stage, nematodes accumulated in young panicles and reproduced quickly,, and the average number of nematodes at 20 days after inoculation increased to 164.5, three times of that at 5 days after inoculation.展开更多
As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established ...As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established by using the coefficients of thermal and humidity expansion,thermal viscosity attenuation,humid viscosity attenuation and acceleration rheology components.We used the definition of a controlled heat circle to explain the model.The results show that the behavior of rock,affected by temperature and humidity,is stable as a function of time when the stress is lower than the first yield stress σS1;the creep rate will increase due to the effect of temperature and humidity when the stress is greater than or equal to σS1;the creep rate will accelerate at an increasing rate when the stress is greater than or equal to the second yield stress σS2,which results in a failure of the roadway.The model derived in this study can completely describe visco-elastic-plastic characteristics and reflects the three stages of rock creep.展开更多
Greenhouse tomato plants (Lycopersicon esculentum Mill cv. Capello) were grown on peat-based substrate and treated with high (4.5 mS cm-1) and low (2.3 mS cm-1) nutrient solution electric conductivity(EC) under high a...Greenhouse tomato plants (Lycopersicon esculentum Mill cv. Capello) were grown on peat-based substrate and treated with high (4.5 mS cm-1) and low (2.3 mS cm-1) nutrient solution electric conductivity(EC) under high and low substrate water contents. FOur weeks after the beginning of the treatments, photosynthesis (Th) was measured under different humidity and temperatures to examine the interactive effectswith rhizosphere salinity and water deficit. A rectangular hyperbolic model fitted the light-photosynthesiscurve. Photosynthetic capacity (PC) was decreased but quantum yield (YQ) was increased by rhizospheresalinity caused by high EC. PN was decreased by low humidity only in high EC- and/or water-stressed plants.Under high photosynthetic photon flux (PPF), low humidity induced PC decline in water-stressed plants andPN oscillation in high-EC-treated plants. PN increased steadily as the leaf temperature changed from 18 Cto 23 and then decreased steadily from 23 to 38 . At 34 , PN decreased significantly in waterstressed plants. Dark respiration (RD) increased in an exponential manner as the leaf temperature changedfrom 18 to 38 to an extent about ten times higher under 38 than under 18 . Our data suggestedthat PN decrease under high temperature was attributed, st least in part, to the increased RD. RD in highEC- and/or water-stressed plants was higher than that in the plants of control under lower temperature butlower than that in the plants of control under high temperature. The analysis of stomatal and mesophyllconductance showed that low humidity effect was mainly through stomatal response while temperature effectwas mainly through biochemical functions. The result showed that environmental stresses affected PN in anadditive or synergistic manner.展开更多
基金supported by National Natural Science Foundation of China(No.12272184).
文摘The production and utilization of high-energetic explosives often pose a range of safety hazards,with sensitivity being a key factor in evaluating these risks.To investigate how temperature,particle size,and air humidity affect the responsiveness of commonly used high-energetic explosives,a series of BAM(Bundesanstalt für Materialforschung und-prüfung)impact and friction sensitivity tests were carried out to determine the critical impact energy and critical load pressure of four representative high-energetic explosives(RDX,HMX,PETN and CL-20)under different temperatures,particle sizes,and air humidity conditions.The experimental findings facilitated an examination of temperature and particle size affecting the sensitivity of high-energetic explosives,along with an assessment of the influence of air humidity on sensitivity testing.The results clearly indicate that high-energetic explosives display a substantial decline in critical reaction energy when subjected to micrometre-sized particles and an air humidity level of 45%at a temperature of 90℃.Furthermore,it was noted that the critical reaction energy of high-energetic explosives diminishes with an increase in temperature within 25℃−90℃.In the same vein,as the particle sizes of high-energetic explosives increase,so does the critical reaction energy for micrometre-sized particles.High air humidity significantly affects the sensitivity testing of high-energetic explosives,emphasizing the importance of refraining from conducting sensitivity tests in such conditions.
基金supports from the National Key Research and Development Program of China(2022YFB3207502).
文摘High-temperature thin-film thermocouples(TFTCs)have attracted significant attention in the aerospace and steel metallurgy industry.However,previous studies on TFTCs have primarily focused on the two-dimensional planar-type,whose thermal sensitive area has to be perpendicular to the test environment,and therefore affects the thermal fluids pattern or loses accuracy.In order to address this problem,recent studies have developed three-dimensional probe-type TFTCs,which can be set parallel to the test environment.Nevertheless,the probe-type TFTCs are limited by their measurement threshold and poor stability at high temperatures.To address these issues,in this study,we propose a novel probe-type TFTC with a sandwich structure.The sensitive layer is compounded with indium oxide doped zinc oxide and fabricated using screen-printing technology.With the protection of sandwich structure on electrode film,the sensor demonstrates robust high-temperature stability,enabling continuous working at 1200℃ above 5 h with a low drift rate of 2.3℃·h^(−1).This sensor exhibits a high repeatability of 99.3% when measuring a wide range of temperatures,which is beyond the most existing probe-type TFTCs reported in the literature.With its excellent high-temperature performance,this temperature sensor holds immense potentials for enhancing equipment safety in the aerospace engineering and ensuring product quality in the steel metallurgy industry.
文摘Submicron scale temperature sensors are crucial for a range of applications,particularly in micro and na-noscale environments.One promising solution involves the use of active whispering gallery mode(WGM)microresonators.These resonators can be remotely excited and read out using free-space structures,simplifying the process of sensing.In this study,we present a submicron-scale temperature sensor with a remarkable sensitivity up to 185 pm/℃based on a trian-gular MAPbI3 nanoplatelet(NPL)laser.Notably,as temperature changes,the peak wavelength of the laser line shifts lin-early.This unique characteristic allows for precise temperature sensing by tracking the peak wavelength of the NPL laser.The optical modes are confined within the perovskite NPL,which measures just 85 nm in height,due to total internal reflec-tion.Our NPL laser boasts several key features,including a high Q of~2610 and a low laser threshold of about 19.8μJ·cm^(−2).The combination of exceptional sensitivity and ultra-small size makes our WGM device an ideal candidate for integration into systems that demand compact temperature sensors.This advancement paves the way for significant prog-ress in the development of ultrasmall temperature sensors,opening new possibilities across various fields.
文摘The development and character of compound temperature-humidity sensor were discussed in this study.The design of sampling,control and output unit of temperature-humidity sensor as well as their manufacture method and character were studied in detail.The relationship between components of humidity resistance materials and negative temperature coefficient ( NTC) thermistor materials in sampling unit of compound sensor and character of electrical resistance and temperature was obtained.Couples of character curves of compound temperature-humidity sensor and data of materials of sampling unit were shown in this paper too.
文摘There is a growing interest in using miniature multi-sensor technology to monitor plant, soil, and environmental conditions in greenhouses and in field settings. The objectives of this study were to build a small multi-channel sensing system with ability to measure visible and near infrared light reflectance, relative humidity, and temperature, to test the light reflectance sensors for measuring spectral characteristics of plant leaves and soilless media, and to compare results of the relative humidity and temperature sensors to identical measurement obtained from a greenhouse sensor. The sensing system was built with off-the-shelf miniature multispectral spectrometers and relative humidity and temperature sensors. The spectrometers were sensitive to visible, red-edge, and near infrared light. The system was placed in a greenhouse setting and used to obtain relative reflectance measurements of plant leaves and soilless media and to record temperature and relative humidity conditions in the greenhouse. The spectrometer data obtained from plant leaf and soilless media were compatible with baseline spectral data collected with a hyperspectral spectroradiometer. The greenhouse was equipped with a relative humidity and temperature sensor. The relative humidity and temperature sensor measurements from our sensor system were strongly correlated with the relative humidity and temperature results obtained with the greenhouse sensors...
基金Supported by Forestry Science and Technology Program of Hunan Province(XLK201406)~~
文摘Under the condition of high temperature, the effects of five cover patterns （clean tillage, film mulching, weed covering, branches and leaves covering and growing grass covering） on soil properties in young Phoebe boumei forest were in- vestigated. The results showed that the five cover patterns all showed significant ef- fects on soil properties in young Phoebe bournei forest under the condition of high temperature. Land cover increased land temperature in Phoebe boumei forest. Un- der the film mulching, the land temperature was increased most rapidly with the largest increment. However, weed covering, branches and leaves covering and growing grass covering decreased land temperature. Among them, growing grass covering showed the best cooling effect. The film mulching, weed covering, branch- es and leaves covering and growing grass covering all increased land humidity. The film mulching showed the best moisture-preserving effect in the early period, but in the late period, the humidity in the film mulching treatment group was lower than that in the clean tillage treatment group. Among the five mulching patterns, moisture loss in the film mulching treatment group was slowest and least, followed by those in the weed covering and branches and leaves covering treatment groups, and moisture loss in the growing grass covering treatment group was fastest and most.
基金Supported by Jiangsu Agricultural Science and Technology Innovation Fund[CX(14)2112]~~
文摘In order to analyze the ventilation and cooling performance of single-tunnel plastic greenhouse in Yangtze-Huai region, the effects of two different ventilation modes （side window, side window＋roof window） on the temperature and humidity of plastic greenhouse were studied. The results showed that the ventilation mode of opening side window and roof window could effectively reduce the temperature and humidity at the plant canopy height, which was conducive to the growth of plant in greenhouse.
基金This study was supported by the National Natural Science Foundation of China (52105593 and 62271439)STI 2030 —Major Projects(2022ZD0208601)the “Pioneer” and “Leading Goose” R&D Program of Zhejiang (2023C01051)。
文摘Flexible and wearable humidity sensors play a vital role in daily point-of-care diagnosis and noncontact human-machine interactions.However,achieving a facile and high-speed fabrication approach to realizing flexible humidity sensors remains a challenge.In this work,a wearable capacitive-type Ga_(2)O_(3)/liquid metal-based humidity sensor is demonstrated by a one-step laser direct writing technique.Owing to the photothermal effect of laser,the Ga_(2)O_(3)-wrapped liquid metal particles can be selectively sintered and converted from insulative to conductive traces with a resistivity of 0.19Ω·cm,while the untreated regions serve as active sensing layers in response to moisture changes.Under 95%relative humidity,the humidity sensor displays a highly stable performance along with rapid response and recover time.Utilizing these superior properties,the Ga_(2)O_(3)/liquid metal-based humidity sensor is able to monitor human respiration rate,as well as skin moisture of the palm under different physiological states for healthcare monitoring.
基金supported by The National Key Research and Development Program of China(2020YFB2009100)Natural Science Basic Research Program of Shaanxi(Program No.2022JQ-508)National Science and Technology Major Project(Grant No.J2019-V-0006-0100),Open research fund of SKLMS(Grant No.sklms2021009).
文摘Flexible temperature sensors have been extensively investigated due to their prospect of wide application in various flexible electronic products.However,most of the current flexible temperature sensors only work well in a narrow temperature range,with their application at high or low temperatures still being a big challenge.This work proposes a flexible thermocouple temperature sensor based on aerogel blanket substrate,the temperature-sensitive layer of which uses the screen-printing technology to prepare indium oxide and indium tin oxide.It has good temperature sensitivity,with the test sensitivity reaching 226.7μV℃^(−1).Most importantly,it can work in a wide temperature range,from extremely low temperatures down to liquid nitrogen temperature to high temperatures up to 1200℃,which is difficult to be achieved by other existing flexible temperature sensors.This temperature sensor has huge application potential in biomedicine,aerospace and other fields.
基金Jin Wu acknowledges financial support from the National Natural Science Foundation of China(No.61801525)the Guangdong Basic and Applied Basic Research Foundation(No.2020A1515010693)+1 种基金the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.22lgqb17)the Independent Fund of the State Key Laboratory of Optoelectronic Materials and Technologies(Sun Yat-sen University)under grant No.OEMT-2022-ZRC-05.
文摘Breathing is an inherent human activity;however,the composition of the air we inhale and gas exhale remains unknown to us.To address this,wearable vapor sensors can help people monitor air composition in real time to avoid underlying risks,and for the early detection and treatment of diseases for home healthcare.Hydrogels with three-dimensional polymer networks and large amounts of water molecules are naturally flexible and stretchable.Functionalized hydrogels are intrinsically conductive,self-healing,self-adhesive,biocompatible,and room-temperature sensitive.Compared with traditional rigid vapor sensors,hydrogel-based gas and humidity sensors can directly fit human skin or clothing,and are more suitable for real-time monitoring of personal health and safety.In this review,current studies on hydrogel-based vapor sensors are investigated.The required properties and optimization methods of wearable hydrogel-based sensors are introduced.Subsequently,existing reports on the response mechanisms of hydrogel-based gas and humidity sensors are summarized.Related works on hydrogel-based vapor sensors for their application in personal health and safety monitoring are presented.Moreover,the potential of hydrogels in the field of vapor sensing is elucidated.Finally,the current research status,challenges,and future trends of hydrogel gas/humidity sensing are discussed.
基金supported by the Na-tional Natural Science Foundation of China(Nos.62175105,61875086)Fundamental Research Funds for the Cen-tral Universities of China(No.ILB240041A24)。
文摘A novel temperature and salinity discriminative sensing method based on forward Brillouin scattering(FBS)in 1060-XP single-mode fiber(SMF)is proposed.The measured frequency shifts corresponding to different radial acoustic modes in 1060-XP SMF show different sensitivities to temperature and salinity.Based on the new phenomenon that different radial acoustic modes have different frequency shift-temperature and frequency shift-salinity coefficients,we propose a novel method for simultaneously measuring temperature and salinity by measuring the frequency shift changes of two FBS scattering peaks.In a proof-of-concept experiment,the temperature and salinity measurement errors are 0.12℃and 0.29%,respectively.The proposed method for simultaneously measuring temperature and salinity has the potential applications such as ocean surveying,food manufacturing and pharmaceutical engineering.
基金support from Liao Ning Revitalization Talents Program(XLYC1907144)Dalian Youth Science and Technology Star Project Support Program(No.2017RQ104)+6 种基金National Key Research and Development Program of China(No.2020YFB0311600)National Natural Science Foundation of China(Grant Nos.22125903,51872283,22075279)Liaoning BaiQianWan Talents Program(Grant XLYC1807153)Dalian Innovation Support Plan for High Level Talents(2019RT09)Dalian National Laboratory For Clean Energy(DNL),CAS,DNL Cooperation Fund,CAS(DNL201912,DNL201915,DNL202016,DNL202019)DICP(DICP ZZBS201802,DICP I2020032)The Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(YLU-DNL Fund 2021002,2021009).
文摘With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.
基金Supported by the Scientific Research and Technology Development Project of Wuzhou Meteorological Bureau(WUQIKEZ2021009).
文摘Developing a calibration and collection system of platinum resistance temperature sensor using Python language environment can read the information returned by the serial port and automatically generate an"Temperature Sensor Calibration Record Table"excel table with the current date as the file name.It can collect data from 10 platinum resistance temperature sensors at once,achieving automation and improving work efficiency.
基金supported by the National Natural Science Foundation of China (30971727,31171479)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China+4 种基金the Key Laboratory Foundation of Jiangsu Province,China (10KJA210057)the Doctoral Advisor Foundation of Education Department of China(20113250110001)the Natural Science Foundation of Jiangsu Province,China (BK2009324)the New Century Academic Leader Project,Yangzhou University of Chinathe Qing-Lan Project,Jiangsu Provincial Educational Department,China
文摘The higher survival rates of Helicoverpa amigera larvae were usually observed after adverse climate which was related to extreme temperature （T） and relative humidity （RH） stresses in transgenic Bacillus thuringiensis （Bt） cotton. The unstable resistance of Bt cotton to bollworms has been correlated with the reduced expression of CrylAc δ-endotoxin. The objective of this study was to investigate the effects of combined temperature and relative humidity stresses on the leaf CrylAc insecticidal protein expression during critical developmental stages. The study was undertaken on two transgenic cotton cultivars that share same parental background, Sikang 1 （a conventional cultivar） and Sikang 3 （a hybrid cultivar）, during the 2007 and 2008 growing seasons at the Yangzhou University Farm, Yangzhou, China. The study was arranged with two factors that consisted of temperature （two levels） and relative humidity （three levels）. The six T/RH treatments were 37℃/95%, 37℃/70%, 37℃/50%, 18℃/95%, 18℃/70%, and 18℃/50%. In 2007, the six treatments were imposed to the plants at peak flowering stage for 24 h; in 2008, the six treatments were applied to the plants at peak square, peak flowering, and peak boll stages for 48 h. The results of the study indicated that the leaf insecticidal protein expression in CrylAc was significantly affected by extreme temperature only at peak flowering stage, and by both extreme temperature and relative humidity during boll filling stage. The greatest reductions were observed when the stresses were applied at peak boll stage. In 2008, after 48 h stress treatment, the leaf Bt endotoxin expression reduced by 25.9-36.7 and 23.6-40.5% at peak boll stage, but only by 14.9-26.5 and 12.8-24.0% at peak flowering stage for Sikang 1 and Sikang 3, respectively. The greatest reduction was found under the low temperature combined with low relative humidity condition for both years. It is believed that the temperature and relative humidity stresses may be attributed to the reduced efficacy of Bt cotton in growing conditions in China, where extreme temperatures often increase up to 35-40℃ and/or decrease down to 15-20℃, and relative humidity may reach to 85-95% and/or reduce to 40-55% during the cotton growing season.
文摘The effect of external roof shading on the spatial distribution of air temperature and relative humidity in a greenhouse(Tin and RHin) was evaluated under the arid climatic conditions of Riyadh City, Saudi Arabia. Two identical, evaporatively-cooled, single-span greenhouses were used in the experiment. One greenhouse was externally shaded(Gs) using a movable black plastic net(30% transmissivity), and the other greenhouse was kept without shading(Gc). Strawberry plants were cultivated in both greenhouses. The results showed that the spatial distribution of the Tin and RHin was significantly affected by the outside solar radiation and evaporative cooling operation. The regression analysis showed that when the outside solar radiation intensity increased from 200 to 800 W m–2, the Tin increased by 4.5℃ in the Gc and 2℃in the Gs, while the RHin decreased by 15% in the Gc and 5% in the Gs, respectively. Compared with those in the Gc, more uniformity in the spatial distribution of the Tin and RHin was observed in the Gs. The difference between the maximum and minimum Tin of 6.4℃ and the RHin of 10% was lower in the Gs than those in the Gc during the early morning. Around 2℃ difference in the Tin was shown between the area closed to the exhausted fans and the area closed to the cooling pad with the external shading. In an evaporatively-cooled greenhouse in arid regions, the variation of the Tin and RHin in the vertical direction and along the sidewalls was much higher than that in the horizontal direction. The average variation of the Tin and RHin in the vertical direction was 5.2℃ and 10% in the Gc and 5.5℃ and 13% in the Gs, respectively. The external shading improved the spatial distribution of the Tin and RHin and improved the cooling efficiency of the evaporative cooling system by 12%, since the transmitted solar radiation and accumulated thermal energy in the greenhouse were significantly reduced.
基金supported by the National Natural Science Foundation of China(30900141)the Chinese Academy of Sciences(KSCX2-EW-J-22,09C302,Y0B3011)the Chinese Academy of Sciences(KSCX2-YW-R-077)
文摘Generally, the function of vocalizations made by male anurans are to attract females or defend resources. Typically, males vocalize in choruses during one or more periods in a twenty-four-hour cycle, which varies, however, among species. Nevertheless, the causal factors influencing circadian variations of calling patterns in anuran species are not clear. In this study, male chorus vocalizations were monitored in the Emei music frog(Babina daunchina) for 17 consecutive days during the breeding season, while its habitat air temperature and relative humidity in the course of experiments were measured as well. The results revealed that the circadian calling patterns were characterized by two periods of peak vocalization, which were observed from 0500 h to 0700 h and from 1300 h to 2000 h, while the lowest activity period was found from 2100 h to 2200 h. Both calls/h and notes/h were positively correlated with air temperature and negatively with relative humidity. Overall, our data indicate that the Emei music frogs(B. daunchina) could regulate their vocal activities based on the changes of physical micro-environment(e. g., temperature or humidity) to maximize reproductive success.
基金Under the auspices of National Natural Science Foundation of China(No.41871343)Major Project of National Natural Science Foundation of China(No.41590842)Strategic Priority Research Program A of the Chinese Academy of Sciences(No.XDA23100201)
文摘The cooling and humidifying effects of urban parks are an essential component of city ecosystems in terms of regulating microclimates or mitigating urban heat islands(UHIs).Air temperature and relative humidity are two main factors of thermal environmental comfort and have a critical impact on the urban environmental quality of human settlements.We measured the 2-m height air temperature and relative humidity at the Beijing Olympic Park and a nearby building roof for more than 1 year to elucidate seasonal variations in air temperature and relative humidity,as well as to investigate the outdoor thermal comfort.The results showed that the lawn of the park could,on average,reduce the air temperature by(0.80±0.19)℃,and increase the relative humidity by(5.24±2.91)% relative to the values measured at the building roof during daytime.During the nighttime,the lawn of the park reduced the air temperature by(2.64±0.64)℃ and increased the relative humidity by(10.77±5.20)%.The park was cooler and more humid than surrounding building area,especially in night period(more pronounced cooling with 1.84℃).Additionally,the lawn of the park could improve outdoor thermal comfort through its cooling and humidifying effects.The level of thermal comfort in the park was higher than that around the building roof for a total of 11 days annually in which it was above one or more thermal comfort levels(average reduced human comfort index of 0.92)except during the winter.
基金supported by the National High Technology Research and Development Program of China (Grant No. 2001AA249021)
文摘The vertical migration of Aphelenchoides besseyi under different temperatures and humidities and at different rice growth stages was investigated. It was found that the optimum temperature for the development and reproduction of A. besseyiwas 25-30℃. At the same temperature, the rate of vertical migration increased with rising relative humidity. Artificial inoculation tests showed that at the elongation stage, nematodes survived mainly on the upper and middle parts of rice culms and the number of nematodes decreased by 50% at 20 days after inoculation compared with that at 5 days after inoculation. Whereas at the booting stage, nematodes accumulated in young panicles and reproduced quickly,, and the average number of nematodes at 20 days after inoculation increased to 164.5, three times of that at 5 days after inoculation.
基金provided by the National Basic Research Program of China (No.2010CB226804)
文摘As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established by using the coefficients of thermal and humidity expansion,thermal viscosity attenuation,humid viscosity attenuation and acceleration rheology components.We used the definition of a controlled heat circle to explain the model.The results show that the behavior of rock,affected by temperature and humidity,is stable as a function of time when the stress is lower than the first yield stress σS1;the creep rate will increase due to the effect of temperature and humidity when the stress is greater than or equal to σS1;the creep rate will accelerate at an increasing rate when the stress is greater than or equal to the second yield stress σS2,which results in a failure of the roadway.The model derived in this study can completely describe visco-elastic-plastic characteristics and reflects the three stages of rock creep.
文摘Greenhouse tomato plants (Lycopersicon esculentum Mill cv. Capello) were grown on peat-based substrate and treated with high (4.5 mS cm-1) and low (2.3 mS cm-1) nutrient solution electric conductivity(EC) under high and low substrate water contents. FOur weeks after the beginning of the treatments, photosynthesis (Th) was measured under different humidity and temperatures to examine the interactive effectswith rhizosphere salinity and water deficit. A rectangular hyperbolic model fitted the light-photosynthesiscurve. Photosynthetic capacity (PC) was decreased but quantum yield (YQ) was increased by rhizospheresalinity caused by high EC. PN was decreased by low humidity only in high EC- and/or water-stressed plants.Under high photosynthetic photon flux (PPF), low humidity induced PC decline in water-stressed plants andPN oscillation in high-EC-treated plants. PN increased steadily as the leaf temperature changed from 18 Cto 23 and then decreased steadily from 23 to 38 . At 34 , PN decreased significantly in waterstressed plants. Dark respiration (RD) increased in an exponential manner as the leaf temperature changedfrom 18 to 38 to an extent about ten times higher under 38 than under 18 . Our data suggestedthat PN decrease under high temperature was attributed, st least in part, to the increased RD. RD in highEC- and/or water-stressed plants was higher than that in the plants of control under lower temperature butlower than that in the plants of control under high temperature. The analysis of stomatal and mesophyllconductance showed that low humidity effect was mainly through stomatal response while temperature effectwas mainly through biochemical functions. The result showed that environmental stresses affected PN in anadditive or synergistic manner.
