Successfully utilized non-axisymmetric endwalls to enhance turbine efficiencies(aerodynamic and turbine inlet temperatures)by controlling the characteristics of the secondary flow in a blade passage.This is accomplish...Successfully utilized non-axisymmetric endwalls to enhance turbine efficiencies(aerodynamic and turbine inlet temperatures)by controlling the characteristics of the secondary flow in a blade passage.This is accomplished by steady-state numerical hydrodynamics and deep knowledge of the field of flow.Because of the interaction between mainstream and purge flow contributing supplementary losses in the stage,non-axisymmetric endwalls are highly susceptible to the inception of purge flow exit compared to the flat and any advantage rapidly vanishes.The conclusions reveal that the supreme endwall pattern could yield a lowering of the gross pressure loss at the design stage and is related to the size of the top-loss location being productively lowered.This has led to diminished global thermal exchange lowered in the passage of the vane alone.The reverse flow adjacent to the suction side corner of the endwall is migrated farther from the vane surface,as the deviated pressure spread on the endwall accelerates the flow and progresses the reverse flow core still downstream.The depleted association between the tornado-like vortex and the corner vortex adjacent to the suction side corner of the endwall is the dominant mechanism of control in the contoured end wall.In this publication,we show that the non-axisymmetric endwall contouring by selective numerical shape change method at most prominent locations is advantageous in lowering the thermal load in turbines to augment the net heat flux reduction as well as the aerodynamic performance using multi-objective optimization.展开更多
Single-fuid nozzles and dual-fuid nozzles are the two typical jet crushing methods used in spray dust reduction. To distinguish the atomization mechanism of single-fuid and dual-fuid nozzles and improve dust control e...Single-fuid nozzles and dual-fuid nozzles are the two typical jet crushing methods used in spray dust reduction. To distinguish the atomization mechanism of single-fuid and dual-fuid nozzles and improve dust control efciency at the coal mining faces, the atomization characteristics and dust reduction performance of the two nozzles were quantitatively compared. Results of experiments show that, as water supply pressure increased, the atomization angle of the swirl pressure nozzle reaches a maximum of 62° at 6 MPa and then decreases, but its droplet size shows an opposite trend with a minimum of 41.7 μm. The water supply pressure helps to improve the droplet size and the atomization angle of the internal mixing air–liquid nozzle, while the air supply pressure has a suppressive efect for them. When the water supply pressure is 0.2 MPa and the air supply pressure reaches 0.4 MPa, the nozzle obtains the smallest droplet size which is 10% smaller than the swirl pressure nozzle. Combined with the dust reduction experimental results, when the water consumption at the working surface is not limited, using the swirl pressure nozzle will achieve a better dust reduction efect. However, the internal mixing air–liquid nozzle can achieve better and more economical dust reduction performance in working environments where water consumption is limited.展开更多
In this paper, based on the Kirchhoff transformation and the natural boundary element method, a coupled natural boundary element and curved edge finite element is applied to solve the anisotropic quasi-linear problem ...In this paper, based on the Kirchhoff transformation and the natural boundary element method, a coupled natural boundary element and curved edge finite element is applied to solve the anisotropic quasi-linear problem in an unbounded domain with a concave angle. By using the principle of the natural boundary reduction, we obtain the natural integral equation on the artificial boundary of circular arc boundary, and get the coupled variational problem and its numerical method. Then the error and convergence of coupling solution are analyzed. Finally, some numerical examples are verified to show the feasibility of our method.展开更多
Purpose:To examine the effects of a school-based karate intervention on academic achievement,psychosocial functioning,and physical fitness in children aged 7-8 years.Methods:Twenty schools in 5 different European coun...Purpose:To examine the effects of a school-based karate intervention on academic achievement,psychosocial functioning,and physical fitness in children aged 7-8 years.Methods:Twenty schools in 5 different European countries(2 second-grade classrooms per school)participated in a cluster randomized controlled trial(Sport at School trial).Participants were assigned to either a control group,which continued with their habitual physical education lessons,or to an intervention group,which replaced these lessons with a 1-year karate intervention(Karate Mind and Movement program).A total of 721 children(344 girls and 377 boys,7.4±0.5 years old,mean±SD)completed the study,of which 333 and 388 were assigned to the control group and intervention group,respectively.Outcomes included academic performance(average grade),psychosocial functioning(Strengths and Difficulties Questionnaire for parents),and different markers of physical fitness(cardiorespiratory fitness,balance,and flexibility).Results:The intervention provided small but significant benefits compared to the control group for academic achievement(d=0.16;p=0.003),conduct problems(d=-0.28;p=0.003),cardiorespiratory fitness(d=0.36;p<0.001),and balance(d=0.24;p=0.015).There was a trend towards significant benefits for flexibility(d=0.24;p=0.056).No significant benefits were observed for other variables,including psychosocial difficulties,emotional symptoms,hyperactivity/inattention,peer problems,or prosocial behaviour(all p>0.05).Conclusion:A 1-year school-based karate intervention was effective in improving academic achievement,conduct problems,and physical fitness in primary school children.The results support the inclusion of karate during physical education lessons.展开更多
The determination of source-side extracted heating parameters is of great significance to the economic operation of cogeneration systems.This paper investigated the coupling performance of a cogeneration heating and p...The determination of source-side extracted heating parameters is of great significance to the economic operation of cogeneration systems.This paper investigated the coupling performance of a cogeneration heating and power system multidimensionally based on the operating characteristics of the cogeneration units,the hydraulic and thermodynamic characteristics of the heating network,and the energy loads.Taking a steam network supported by a gas-steam combined cycle cogeneration system as the research case,the interaction effect among the source-side prime movers,the heating networks,and the terminal demand thermal parameters were investigated based on the designed values,the plant testing data,and the validated simulation.The operating maps of the gas-steam combined cycle cogeneration units were obtained using THERMOFLEX,and the minimum source-side steam parameters of the steam network were solved using an inverse solution procedure based on the hydro-thermodynamic coupling model.The cogeneration operating maps indicate that the available operating domain considerably narrows with the rise of the extraction steam pressure and flow rate.The heating network inverse solution demonstrates that the source-side steam pressure and temperature can be optimized from the originally designed 1.11 MPa and 238.8°C to 1.074 MPa and 191.15°C,respectively.Under the operating strategy with the minimum source-side heating parameters,the power peak regulation depth remarkably increases to 18.30%whereas the comprehensive thermal efficiency decreases.The operation under the minimum source-side heating steam parameters can be superior to the originally designed one in the economy at a higher price of the heating steam.At a fuel price of$0.38/kg and the power to fuel price of 0.18 kg/(kW·h),the critical price ratio of heating steam to fuel is 119.1 kg/t.The influence of the power-fuel price ratio on the economic deviation appears relatively weak.展开更多
Converting carbon dioxide(CO_(2)) into useful fuels or chemical feedstocks is important for achieving peak carbon emission and carbon neutrality.Recently,photothermal catalysis has been extensively studied and applied...Converting carbon dioxide(CO_(2)) into useful fuels or chemical feedstocks is important for achieving peak carbon emission and carbon neutrality.Recently,photothermal catalysis has been extensively studied and applied due to its advantages over traditional heat-driven catalysis.In this review,we focus on photothermal catalysis of thermodynamically uphill reactions that convert CO_(2)into value-added products.We first introduce the fundamentals of photothermal catalysis for CO_(2)reduction,including the definition and classification of photothermal catalysis,followed by their photothermal conversion processes.The structure design of different types of photothermal catalysts is summarized.The superior performance of photothermal catalytic conversion of CO_(2)is illustrated and discussed,including improved CO_(2)activation,tunable selectivity towards different solar fuel products,and resistance to sintering and coking.Finally,the perspectives and challenges in this cutting-edge field are presented with the aim of advancing understanding of the underlying mechanisms and inspiring rational design of photothermal catalysts for highly efficient solar-to-fuel conversion.展开更多
Numeracy is the capacity to use mathematical ideas in all facets of life.It involves activities such as adding and subtracting numbers,counting,number recognition,solving number problems involving various operations,s...Numeracy is the capacity to use mathematical ideas in all facets of life.It involves activities such as adding and subtracting numbers,counting,number recognition,solving number problems involving various operations,sorting,observing,identifying,and establishing patterns.It is one of the fundamental skills that students should have mastered by the end of their primary schooling.With the notable importance of mastery of numeracy skills,low achievement and performance of the learners were observed in this aspect.This study aimed in enhancing the numeracy skills of Grade 3 learners through authentic performance tasks.The variable in numeracy skills includes the four fundamental operations and problem solving.The quasi-experimental design was utilized wherein purposive sampling or non-randomized sampling was used.In this study,33 Grade 3 learners of Rizal Elementary School were selected to participate in the tests.Pre-test and post-test crafted by the teacher were the main instrument in the study.The result revealed that in the pre-test the learners obtained a mean percentage score(MPS)of 38.20%in four fundamental operations,which implied a non-numerate level.While in terms of problem solving,the learners obtained a MPS of 20.60%which is also in the non-numerate level.It has a grand mean of 29.40%with an interpretation of non-numerate level.In the post-test,it was observed that four fundamental operations have a MPS of 81.10%which is in average numerate level,while problem solving has a MPS of 76.30%with a grand mean of 78.70%with an interpretation of average numerate level.This implied that there is a significant difference between the pre-test and post-test in the four fundamental operations and problem solving.Thus,it can be concluded that the application of authentic performance tasks was effective to bridge the gap on numeracy skills.展开更多
Two series of Mn/beta and Mn/ZSM‐5catalysts were prepared to study the influence of how different Mn precursors,introduced to the respective parent zeolites by wet impregnation,affected the selective catalytic reduct...Two series of Mn/beta and Mn/ZSM‐5catalysts were prepared to study the influence of how different Mn precursors,introduced to the respective parent zeolites by wet impregnation,affected the selective catalytic reduction(SCR)of NO by NH3across a low reaction temperature window of50–350°C.In this study,the catalysts were characterized using N2adsorption/desorption,X‐ray diffraction,X‐ray fluorescence,H2temperature‐programmed reduction,NH3temperature‐programmed desorption and X‐ray photoelectron spectroscopy.As the manganese chloride precursor only partially decomposed this primarily resulted in the formation of MnCl2in addition to the presence of low levels of crystalline Mn3O4,which resulted in poor catalytic performance.However,the manganese nitrate precursor formed crystalline MnO2as the major phase in addition to a minor presence of unconverted Mn‐nitrate.Furthermore,manganese acetate resulted principally in a mixture of amorphous Mn2O3and MnO2,and crystalline Mn3O4.From all the catalysts screened,the test performance data showed Mn/beta‐Ac to exhibit the highest NO conversion(97.5%)at240°C,which remained>90%across a temperature window of220–350°C.The excellent catalytic performance was ascribed to the enrichment of highly dispersed MnOx(Mn2O3and MnO2)species that act as the active phase in the NH3‐SCR process.Furthermore,together with a suitable amount of weakly acidic centers,higher concentration of surface manganese and a greater presence of surface labile oxygen groups,SCR performance was collectively enhanced at low temperature.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.展开更多
Symmetry reduction of a class of third-order evolution equations that admit certain generalized conditionalsymmetries (GCSs) is implemented.The reducibility of the initial-value problem for an evolution equation to a ...Symmetry reduction of a class of third-order evolution equations that admit certain generalized conditionalsymmetries (GCSs) is implemented.The reducibility of the initial-value problem for an evolution equation to a Cauchyproblem for a system of ordinary differential equations (ODEs) is characterized via the GCS and its Lie symmetry.Complete classification theorems are obtained and some examples are taken to show the main reduction procedure.展开更多
This paper is devoted to studying symmetry reduction of Cauchy problems for the fourth-order quasi-linear parabolic equations that admit certain generalized conditional symmetries （GCSs）. Complete group classificati...This paper is devoted to studying symmetry reduction of Cauchy problems for the fourth-order quasi-linear parabolic equations that admit certain generalized conditional symmetries （GCSs）. Complete group classification results are presented, and some examples are given to show the main reduction procedure.展开更多
The performance of Mn-W/TiO2 for selective catalytic reduction（SCR） of NOx with NH3 and its resistance to different concentrations of SO2 at various temperatures were investigated. The results show that WO3 increase...The performance of Mn-W/TiO2 for selective catalytic reduction（SCR） of NOx with NH3 and its resistance to different concentrations of SO2 at various temperatures were investigated. The results show that WO3 increased the active sites and enhanced the strength of acid, so it was an effective promoter of MnOJTiO2. The NOx conversion on Mn-W/TiO2 ranges from 80.3% to 99.6% between 100 ℃to 350℃ at GHSV=18900 h 1, while N2 product selectivity changes from 100% to 98.7%. In the presence of 0.01% SO2 and 6% H20, NOx conversion maintained 98.5% at 120℃. The influence of more than 0.01% SO2 on the activity of MnOx-WO3/TiO2 will disappear if the temperature rises above 250℃. By means of heating and sweeping with He, the activity of the catalysts can be recovered. At 300℃, NOx conversion yielded 99% with 0.07% SO2 and reached the level of commercial V-W/TiO2 catalysts. The Mn-W/TiO2 catalyst showed excellent performance for SCR of NOx with NH3 in a wider range of temperature with strong tolerance to SO2.展开更多
The luminance in the road tunnel threshold zone attracts broad attention due to its enormous energy consumption and direct influence on tunnel transportation security.Current lighting design methods in threshold zones...The luminance in the road tunnel threshold zone attracts broad attention due to its enormous energy consumption and direct influence on tunnel transportation security.Current lighting design methods in threshold zones mostly adopt the reduction coefficient method.However,the determination of reduction coefficient k simply considers tunnel design speed and flow rate,while excluding outside tunnel luminance and threshold zone color temperature and luminance,which have a major impact on driver visual adaptation.Existing problems in the determination of k value are analyzed;a visual performance experiment is utilized;and the reaction time of drivers in changeable outside tunnel luminance and threshold zone color temperature and luminance conditions is obtained;thus,the equations concerning reduction coefficient variation law are derived.In the end,a comparative analysis is made of the k values of the reduction coefficient stipulated by various norms under different color temperature conditions.展开更多
The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction（SCR） of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and...The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction（SCR） of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and a N2 product selectivity of 100%—98.7% during 100 °C to 350 °C at gas hourly space velocity（GHSV）=18900 h-1.In the presence of 0.01% SO2 and 6% H2O at 120 °C,the NOx conversion can maintain 98.5%.At 300 °C and with 0.07% SO2 in reactant stream,the NOx conversion stabilized at 99% as high as the commercial V-W/TiO2 catalyst＇s level.The steady-state kinetics study shows that O2 played a promoting role.In the presence of less than 1.5% O2,NOx conversion can increase sharply with the increase of O2 concentration.The reaction order was zero with respect to NH3 and first with respect to NO with excess O2 and H2O.The kinetics active energy（Ea） of Mn-W/TiO2 was calculated to be 6.24 kJ/mol according to the kinetic experiment at various temperatures,much lower than those of other catalysts reported in the literature.Mn-W/TiO2 is an excellent catalyst for SCR of NO with NH3 by now.展开更多
A series CeO2（ZrO2）/TiO2 catalysts were modified with Er using a sol-gel method.The catalytic activity of the obtained catalysts in the selective catalytic reduction（SCR） of NO with NH3 was investigated to determi...A series CeO2（ZrO2）/TiO2 catalysts were modified with Er using a sol-gel method.The catalytic activity of the obtained catalysts in the selective catalytic reduction（SCR） of NO with NH3 was investigated to determine the appropriate Er dosage.The catalysts were characterized using X-ray diffraction,N2 adsorption,NH3 temperature-programmed desorption,H2 temperature-programmed reduction,photoluminescence spectroscopy,electron paramagnetic resonance spectroscopy,and X-ray photoelectron spectroscopy.The results showed that the optimum Er/Ce molar ratio was 0.10;this catalyst had excellent resistance to catalyst poisoning caused by vapor and sulfur and gave more than 90% NO conversion at 220–395 ℃ and a gas hourly space velocity of 71 400 h^-1.Er incorporation increased the Ti^3＋ concentrations,oxygen storage capacities,and oxygen vacancy concentrations of the catalysts,resulting in excellent catalytic performance.Er incorporation also decreased the acid strength and inhibited growth of TiO2 and CeO2 crystal particles,which increased the catalytic activity.The results show that high oxygen vacancy concentrations and oxygen storage capacities,large amounts of Ti^3＋,and low acid strengths give excellent SCR activity.展开更多
In this paper we present a precise integration method based on high order multiple perturbation method and reduction method for solving a class of singular twopoint boundary value problems.Firstly,by employing the met...In this paper we present a precise integration method based on high order multiple perturbation method and reduction method for solving a class of singular twopoint boundary value problems.Firstly,by employing the method of variable coefficient dimensional expanding,the non-homogeneous ordinary differential equations（ODEs） are transformed into homogeneous ODEs.Then the interval is divided evenly,and the transfer matrix in every subinterval is worked out using the high order multiple perturbation method,and a set of algebraic equations is given in the form of matrix by the precise integration relation for each segment,which is worked out by the reduction method.Finally numerical examples are elaboratedd to validate the present method.展开更多
Energy optimization is one of the key problems for ship roll reduction systems in the last decade. According to the nonlinear characteristics of ship motion, the four degrees of freedom nonlinear model of Fin/Rudder r...Energy optimization is one of the key problems for ship roll reduction systems in the last decade. According to the nonlinear characteristics of ship motion, the four degrees of freedom nonlinear model of Fin/Rudder roll stabilization can be established. This paper analyzes energy consumption caused by overcoming the resistance and the yaw, which is added to the fin/rudder roll stabilization system as new performance index. In order to achieve the purpose of the roll reduction, ship course keeping and energy optimization, the self-tuning PID controller based on the multi-objective genetic algorithm （MOGA） method is used to optimize performance index. In addition, random weight coefficient is adopted to build a multi-objective genetic algorithm optimization model. The objective function is improved so that the objective function can be normalized to a constant level. Simulation results showed that the control method based on MOGA, compared with the traditional control method, not only improves the efficiency of roll stabilization and yaw control precision, but also optimizes the energy of the system. The proposed methodology can get a better performance at different sea states.展开更多
To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstru...To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.展开更多
Fracturing fluid is the blood of fracturing construction, which is very important for fracturing, which requires that fracturing fluid needs to have good performance. The three commonly used fracturing fluids for unco...Fracturing fluid is the blood of fracturing construction, which is very important for fracturing, which requires that fracturing fluid needs to have good performance. The three commonly used fracturing fluids for unconventional oil and gas reservoir transformation are: 1) Guar gum fracturing fluid;2) Water-based emulsion slippery water fracturing fluid;3) Oil-based emulsion slippery water fracturing fluid. In this paper, water samples and other experimental data provided by Mahu Oilfield are used to evaluate three different fracturing fluid systems in laboratory. The formulas of the three different fracturing fluid systems are: 1) Water-based emulsion slippery water fracturing fluid is clean slippery water fracturing fluid 0.1% JHFR-2D drag reducer + 0.2% JHFD-2 multifunctional additive;2) Oil-based emulsion slippery water fracturing fluid 0.1% A agent + 0.2% B agent;3) Guar gum fracturing fluid 0.1% guanidine gum + 0.5% drainage aid + 0.3% demulsifier. The compatibility, drag reduction performance, reservoir damage, residue content, anti-swelling performance, surface interfacial tension, viscosity and other properties of three different slippery water fracturing fluid systems were studied. Through laboratory experiments, the comprehensive indicators show that clean slippery water fracturing fluid has obvious advantages.展开更多
VOCs can exert great harm to both human and environment,and catalytic oxidation is believed to be an effective technique to eliminate these pollutants.In this paper,Ag-Mn bimetal catalysts with 10 wt.%of silver were s...VOCs can exert great harm to both human and environment,and catalytic oxidation is believed to be an effective technique to eliminate these pollutants.In this paper,Ag-Mn bimetal catalysts with 10 wt.%of silver were synthesized using doping,impregnation,and reduction methods respectively,and then they were applied to the catalytic oxidation of benzene.Through series of characterizations it showed that the loading of silver using reduction method significantly resulted in improved physico-chemical properties of manganese oxides,such as larger surface area and pore volume,higher proportion of surface Mn~(3+)and Mn~(4+),stronger reducibility and more active of surface oxygen species,which were all beneficial to its catalytic activity.As a result,the Ag-Mn catalysts synthesized by reduction method showed a lower T_(90)value(equals to the temperature at which 90%of initial benzene was removed)of 203℃.Besides,both the used and fresh Ag-Mn catalysts synthesized by reduction method showed preferable stability in this research.展开更多
文摘Successfully utilized non-axisymmetric endwalls to enhance turbine efficiencies(aerodynamic and turbine inlet temperatures)by controlling the characteristics of the secondary flow in a blade passage.This is accomplished by steady-state numerical hydrodynamics and deep knowledge of the field of flow.Because of the interaction between mainstream and purge flow contributing supplementary losses in the stage,non-axisymmetric endwalls are highly susceptible to the inception of purge flow exit compared to the flat and any advantage rapidly vanishes.The conclusions reveal that the supreme endwall pattern could yield a lowering of the gross pressure loss at the design stage and is related to the size of the top-loss location being productively lowered.This has led to diminished global thermal exchange lowered in the passage of the vane alone.The reverse flow adjacent to the suction side corner of the endwall is migrated farther from the vane surface,as the deviated pressure spread on the endwall accelerates the flow and progresses the reverse flow core still downstream.The depleted association between the tornado-like vortex and the corner vortex adjacent to the suction side corner of the endwall is the dominant mechanism of control in the contoured end wall.In this publication,we show that the non-axisymmetric endwall contouring by selective numerical shape change method at most prominent locations is advantageous in lowering the thermal load in turbines to augment the net heat flux reduction as well as the aerodynamic performance using multi-objective optimization.
基金funded by the National Natural Science Foundation of China(52274237)the Fundamental Research Funds for the Central Universities(2021ZDPYYQ007)+1 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX22_2656)the Graduate Innovation Program of China University of Mining and Technology(2022WLKXJ026).
文摘Single-fuid nozzles and dual-fuid nozzles are the two typical jet crushing methods used in spray dust reduction. To distinguish the atomization mechanism of single-fuid and dual-fuid nozzles and improve dust control efciency at the coal mining faces, the atomization characteristics and dust reduction performance of the two nozzles were quantitatively compared. Results of experiments show that, as water supply pressure increased, the atomization angle of the swirl pressure nozzle reaches a maximum of 62° at 6 MPa and then decreases, but its droplet size shows an opposite trend with a minimum of 41.7 μm. The water supply pressure helps to improve the droplet size and the atomization angle of the internal mixing air–liquid nozzle, while the air supply pressure has a suppressive efect for them. When the water supply pressure is 0.2 MPa and the air supply pressure reaches 0.4 MPa, the nozzle obtains the smallest droplet size which is 10% smaller than the swirl pressure nozzle. Combined with the dust reduction experimental results, when the water consumption at the working surface is not limited, using the swirl pressure nozzle will achieve a better dust reduction efect. However, the internal mixing air–liquid nozzle can achieve better and more economical dust reduction performance in working environments where water consumption is limited.
文摘In this paper, based on the Kirchhoff transformation and the natural boundary element method, a coupled natural boundary element and curved edge finite element is applied to solve the anisotropic quasi-linear problem in an unbounded domain with a concave angle. By using the principle of the natural boundary reduction, we obtain the natural integral equation on the artificial boundary of circular arc boundary, and get the coupled variational problem and its numerical method. Then the error and convergence of coupling solution are analyzed. Finally, some numerical examples are verified to show the feasibility of our method.
基金supported by the Erasmus+program of the European Union(567201-EPP-1-2015-2-IT-SPO-SCP)supported by the University of Alcala(FPI2016)。
文摘Purpose:To examine the effects of a school-based karate intervention on academic achievement,psychosocial functioning,and physical fitness in children aged 7-8 years.Methods:Twenty schools in 5 different European countries(2 second-grade classrooms per school)participated in a cluster randomized controlled trial(Sport at School trial).Participants were assigned to either a control group,which continued with their habitual physical education lessons,or to an intervention group,which replaced these lessons with a 1-year karate intervention(Karate Mind and Movement program).A total of 721 children(344 girls and 377 boys,7.4±0.5 years old,mean±SD)completed the study,of which 333 and 388 were assigned to the control group and intervention group,respectively.Outcomes included academic performance(average grade),psychosocial functioning(Strengths and Difficulties Questionnaire for parents),and different markers of physical fitness(cardiorespiratory fitness,balance,and flexibility).Results:The intervention provided small but significant benefits compared to the control group for academic achievement(d=0.16;p=0.003),conduct problems(d=-0.28;p=0.003),cardiorespiratory fitness(d=0.36;p<0.001),and balance(d=0.24;p=0.015).There was a trend towards significant benefits for flexibility(d=0.24;p=0.056).No significant benefits were observed for other variables,including psychosocial difficulties,emotional symptoms,hyperactivity/inattention,peer problems,or prosocial behaviour(all p>0.05).Conclusion:A 1-year school-based karate intervention was effective in improving academic achievement,conduct problems,and physical fitness in primary school children.The results support the inclusion of karate during physical education lessons.
基金Guangdong Province Key Laboratory of Efficient and Clean Energy Utilization(South China University of Technology)(2013A061401005)Research Fund(JMSWFW-2110-044)from Zhongshan Jiaming Electric Power Co.,Ltd.
文摘The determination of source-side extracted heating parameters is of great significance to the economic operation of cogeneration systems.This paper investigated the coupling performance of a cogeneration heating and power system multidimensionally based on the operating characteristics of the cogeneration units,the hydraulic and thermodynamic characteristics of the heating network,and the energy loads.Taking a steam network supported by a gas-steam combined cycle cogeneration system as the research case,the interaction effect among the source-side prime movers,the heating networks,and the terminal demand thermal parameters were investigated based on the designed values,the plant testing data,and the validated simulation.The operating maps of the gas-steam combined cycle cogeneration units were obtained using THERMOFLEX,and the minimum source-side steam parameters of the steam network were solved using an inverse solution procedure based on the hydro-thermodynamic coupling model.The cogeneration operating maps indicate that the available operating domain considerably narrows with the rise of the extraction steam pressure and flow rate.The heating network inverse solution demonstrates that the source-side steam pressure and temperature can be optimized from the originally designed 1.11 MPa and 238.8°C to 1.074 MPa and 191.15°C,respectively.Under the operating strategy with the minimum source-side heating parameters,the power peak regulation depth remarkably increases to 18.30%whereas the comprehensive thermal efficiency decreases.The operation under the minimum source-side heating steam parameters can be superior to the originally designed one in the economy at a higher price of the heating steam.At a fuel price of$0.38/kg and the power to fuel price of 0.18 kg/(kW·h),the critical price ratio of heating steam to fuel is 119.1 kg/t.The influence of the power-fuel price ratio on the economic deviation appears relatively weak.
基金financially supported by the Natural Science Foundation of Beijing,China (2204079)the Science and Technology General Project of Beijing Municipal Education Commission(KM202010020001)support from the endowed Jacob F. Buckman Chair fund。
文摘Converting carbon dioxide(CO_(2)) into useful fuels or chemical feedstocks is important for achieving peak carbon emission and carbon neutrality.Recently,photothermal catalysis has been extensively studied and applied due to its advantages over traditional heat-driven catalysis.In this review,we focus on photothermal catalysis of thermodynamically uphill reactions that convert CO_(2)into value-added products.We first introduce the fundamentals of photothermal catalysis for CO_(2)reduction,including the definition and classification of photothermal catalysis,followed by their photothermal conversion processes.The structure design of different types of photothermal catalysts is summarized.The superior performance of photothermal catalytic conversion of CO_(2)is illustrated and discussed,including improved CO_(2)activation,tunable selectivity towards different solar fuel products,and resistance to sintering and coking.Finally,the perspectives and challenges in this cutting-edge field are presented with the aim of advancing understanding of the underlying mechanisms and inspiring rational design of photothermal catalysts for highly efficient solar-to-fuel conversion.
文摘Numeracy is the capacity to use mathematical ideas in all facets of life.It involves activities such as adding and subtracting numbers,counting,number recognition,solving number problems involving various operations,sorting,observing,identifying,and establishing patterns.It is one of the fundamental skills that students should have mastered by the end of their primary schooling.With the notable importance of mastery of numeracy skills,low achievement and performance of the learners were observed in this aspect.This study aimed in enhancing the numeracy skills of Grade 3 learners through authentic performance tasks.The variable in numeracy skills includes the four fundamental operations and problem solving.The quasi-experimental design was utilized wherein purposive sampling or non-randomized sampling was used.In this study,33 Grade 3 learners of Rizal Elementary School were selected to participate in the tests.Pre-test and post-test crafted by the teacher were the main instrument in the study.The result revealed that in the pre-test the learners obtained a mean percentage score(MPS)of 38.20%in four fundamental operations,which implied a non-numerate level.While in terms of problem solving,the learners obtained a MPS of 20.60%which is also in the non-numerate level.It has a grand mean of 29.40%with an interpretation of non-numerate level.In the post-test,it was observed that four fundamental operations have a MPS of 81.10%which is in average numerate level,while problem solving has a MPS of 76.30%with a grand mean of 78.70%with an interpretation of average numerate level.This implied that there is a significant difference between the pre-test and post-test in the four fundamental operations and problem solving.Thus,it can be concluded that the application of authentic performance tasks was effective to bridge the gap on numeracy skills.
基金supported by the National Science and Technology Program of China(CDGC01-KT16)~~
文摘Two series of Mn/beta and Mn/ZSM‐5catalysts were prepared to study the influence of how different Mn precursors,introduced to the respective parent zeolites by wet impregnation,affected the selective catalytic reduction(SCR)of NO by NH3across a low reaction temperature window of50–350°C.In this study,the catalysts were characterized using N2adsorption/desorption,X‐ray diffraction,X‐ray fluorescence,H2temperature‐programmed reduction,NH3temperature‐programmed desorption and X‐ray photoelectron spectroscopy.As the manganese chloride precursor only partially decomposed this primarily resulted in the formation of MnCl2in addition to the presence of low levels of crystalline Mn3O4,which resulted in poor catalytic performance.However,the manganese nitrate precursor formed crystalline MnO2as the major phase in addition to a minor presence of unconverted Mn‐nitrate.Furthermore,manganese acetate resulted principally in a mixture of amorphous Mn2O3and MnO2,and crystalline Mn3O4.From all the catalysts screened,the test performance data showed Mn/beta‐Ac to exhibit the highest NO conversion(97.5%)at240°C,which remained>90%across a temperature window of220–350°C.The excellent catalytic performance was ascribed to the enrichment of highly dispersed MnOx(Mn2O3and MnO2)species that act as the active phase in the NH3‐SCR process.Furthermore,together with a suitable amount of weakly acidic centers,higher concentration of surface manganese and a greater presence of surface labile oxygen groups,SCR performance was collectively enhanced at low temperature.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.
基金Supported by the National Natural Science Foundation of China under Grant Nos.10447007 and 10671156the Natural Science Foundation of Shaanxi Province of China under Grant No.2005A13
文摘Symmetry reduction of a class of third-order evolution equations that admit certain generalized conditionalsymmetries (GCSs) is implemented.The reducibility of the initial-value problem for an evolution equation to a Cauchyproblem for a system of ordinary differential equations (ODEs) is characterized via the GCS and its Lie symmetry.Complete classification theorems are obtained and some examples are taken to show the main reduction procedure.
基金Supported by the National Natural Science Foundation of China under Grant No.10671156the Natural Science Foundation of Shaanxi Province of China under Grant No.SJ08A05
文摘This paper is devoted to studying symmetry reduction of Cauchy problems for the fourth-order quasi-linear parabolic equations that admit certain generalized conditional symmetries （GCSs）. Complete group classification results are presented, and some examples are given to show the main reduction procedure.
文摘The performance of Mn-W/TiO2 for selective catalytic reduction（SCR） of NOx with NH3 and its resistance to different concentrations of SO2 at various temperatures were investigated. The results show that WO3 increased the active sites and enhanced the strength of acid, so it was an effective promoter of MnOJTiO2. The NOx conversion on Mn-W/TiO2 ranges from 80.3% to 99.6% between 100 ℃to 350℃ at GHSV=18900 h 1, while N2 product selectivity changes from 100% to 98.7%. In the presence of 0.01% SO2 and 6% H20, NOx conversion maintained 98.5% at 120℃. The influence of more than 0.01% SO2 on the activity of MnOx-WO3/TiO2 will disappear if the temperature rises above 250℃. By means of heating and sweeping with He, the activity of the catalysts can be recovered. At 300℃, NOx conversion yielded 99% with 0.07% SO2 and reached the level of commercial V-W/TiO2 catalysts. The Mn-W/TiO2 catalyst showed excellent performance for SCR of NOx with NH3 in a wider range of temperature with strong tolerance to SO2.
基金Project(51278507)supported by the National Natural Science Foundation of ChinaProject(cstc2017jcyjAX0346)supported by Chongqing Association for Science and Technology,China
文摘The luminance in the road tunnel threshold zone attracts broad attention due to its enormous energy consumption and direct influence on tunnel transportation security.Current lighting design methods in threshold zones mostly adopt the reduction coefficient method.However,the determination of reduction coefficient k simply considers tunnel design speed and flow rate,while excluding outside tunnel luminance and threshold zone color temperature and luminance,which have a major impact on driver visual adaptation.Existing problems in the determination of k value are analyzed;a visual performance experiment is utilized;and the reaction time of drivers in changeable outside tunnel luminance and threshold zone color temperature and luminance conditions is obtained;thus,the equations concerning reduction coefficient variation law are derived.In the end,a comparative analysis is made of the k values of the reduction coefficient stipulated by various norms under different color temperature conditions.
文摘The catalytic activities of MnOx-WO3/TiO2 for selective catalytic reduction（SCR） of NO with NH3 were investigated in a wide range of temperature and reaction condition.It yielded a NOx conversion of 80.3%—99.6% and a N2 product selectivity of 100%—98.7% during 100 °C to 350 °C at gas hourly space velocity（GHSV）=18900 h-1.In the presence of 0.01% SO2 and 6% H2O at 120 °C,the NOx conversion can maintain 98.5%.At 300 °C and with 0.07% SO2 in reactant stream,the NOx conversion stabilized at 99% as high as the commercial V-W/TiO2 catalyst＇s level.The steady-state kinetics study shows that O2 played a promoting role.In the presence of less than 1.5% O2,NOx conversion can increase sharply with the increase of O2 concentration.The reaction order was zero with respect to NH3 and first with respect to NO with excess O2 and H2O.The kinetics active energy（Ea） of Mn-W/TiO2 was calculated to be 6.24 kJ/mol according to the kinetic experiment at various temperatures,much lower than those of other catalysts reported in the literature.Mn-W/TiO2 is an excellent catalyst for SCR of NO with NH3 by now.
基金supported by the National Natural Science Foundation of China(51272105)Jiangsu Provincial Science and Technology Supporting Program(BE2013718)+1 种基金Research Subject of Environmental Protection Department of Jiangsu Province of China(2013006)Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)~~
文摘A series CeO2（ZrO2）/TiO2 catalysts were modified with Er using a sol-gel method.The catalytic activity of the obtained catalysts in the selective catalytic reduction（SCR） of NO with NH3 was investigated to determine the appropriate Er dosage.The catalysts were characterized using X-ray diffraction,N2 adsorption,NH3 temperature-programmed desorption,H2 temperature-programmed reduction,photoluminescence spectroscopy,electron paramagnetic resonance spectroscopy,and X-ray photoelectron spectroscopy.The results showed that the optimum Er/Ce molar ratio was 0.10;this catalyst had excellent resistance to catalyst poisoning caused by vapor and sulfur and gave more than 90% NO conversion at 220–395 ℃ and a gas hourly space velocity of 71 400 h^-1.Er incorporation increased the Ti^3＋ concentrations,oxygen storage capacities,and oxygen vacancy concentrations of the catalysts,resulting in excellent catalytic performance.Er incorporation also decreased the acid strength and inhibited growth of TiO2 and CeO2 crystal particles,which increased the catalytic activity.The results show that high oxygen vacancy concentrations and oxygen storage capacities,large amounts of Ti^3＋,and low acid strengths give excellent SCR activity.
基金supported by the National Natural Science Foundation of China (11132004 and 51078145)the Natural Science Foundation of Guangdong Province (9251064101000016)
文摘In this paper we present a precise integration method based on high order multiple perturbation method and reduction method for solving a class of singular twopoint boundary value problems.Firstly,by employing the method of variable coefficient dimensional expanding,the non-homogeneous ordinary differential equations（ODEs） are transformed into homogeneous ODEs.Then the interval is divided evenly,and the transfer matrix in every subinterval is worked out using the high order multiple perturbation method,and a set of algebraic equations is given in the form of matrix by the precise integration relation for each segment,which is worked out by the reduction method.Finally numerical examples are elaboratedd to validate the present method.
基金Foundation item： Supported by the National Natural Science Foundation of China （Grant No. 61174047） and the Fundamental Research Funds for the Central Universities （HEUCF041406）.
文摘Energy optimization is one of the key problems for ship roll reduction systems in the last decade. According to the nonlinear characteristics of ship motion, the four degrees of freedom nonlinear model of Fin/Rudder roll stabilization can be established. This paper analyzes energy consumption caused by overcoming the resistance and the yaw, which is added to the fin/rudder roll stabilization system as new performance index. In order to achieve the purpose of the roll reduction, ship course keeping and energy optimization, the self-tuning PID controller based on the multi-objective genetic algorithm （MOGA） method is used to optimize performance index. In addition, random weight coefficient is adopted to build a multi-objective genetic algorithm optimization model. The objective function is improved so that the objective function can be normalized to a constant level. Simulation results showed that the control method based on MOGA, compared with the traditional control method, not only improves the efficiency of roll stabilization and yaw control precision, but also optimizes the energy of the system. The proposed methodology can get a better performance at different sea states.
基金Open Fund of Key Laboratory of Ministry of Education for Metallurgical Emission Reduction and Comprehensive Utilization of Resources,China(No.JKF19-08)General Project of Science and Technology Plan of Yunnan Science and Technology Department,China(No.2019FB077)+1 种基金Industrialization Cultivation Project of Scientific Research Fund of Yunnan Provincial Department of Education,China(No.2016CYH07)Top Young Talents of Yunnan Ten Thousand Talents Plan,China(No.YNWR-QNBJ-2019-263)。
文摘To improve the denitrification performance of carbon-based materials for sintering flue gas,we prepared a composite catalyst comprising coconut shell activated carbon(AC)modified by thermal oxidation air.The microstructure,the specific surface area,the pore volume,the crystal structure,and functional groups presented in the prepared Cu2O/AC catalysts were thoroughly characterized.By using scanning electron microscopy(SEM),nitrogen adsorption/desorption isotherms,Fourier-transform infrared(FTIR)spectroscopy and X-ray diffractometry(XRD),the effects of Cu2O loading and calcination temperature on Cu2O/AC catalysts were investigated at low temperature(150℃).The research shows that Cu on the Cu2O/AC catalyst is in the form of Cu2O with good crystalline performance and is spherical and uniformly dispersed on the AC surface.The loading of Cu2O increases the active sites and the specific surface area of the reaction gas contact,which is conducive to the rapid progress of the carbon monoxide selective catalytic reduction(CO-SCR)reaction.When the loading of Cu2O was 8%and the calcination temperature was 500℃,the removal rate of NOx facilitated by the Cu2O/AC catalyst reached 97.9%.These findings provide a theoretical basis for understanding the denitrification of sintering flue gas.
文摘Fracturing fluid is the blood of fracturing construction, which is very important for fracturing, which requires that fracturing fluid needs to have good performance. The three commonly used fracturing fluids for unconventional oil and gas reservoir transformation are: 1) Guar gum fracturing fluid;2) Water-based emulsion slippery water fracturing fluid;3) Oil-based emulsion slippery water fracturing fluid. In this paper, water samples and other experimental data provided by Mahu Oilfield are used to evaluate three different fracturing fluid systems in laboratory. The formulas of the three different fracturing fluid systems are: 1) Water-based emulsion slippery water fracturing fluid is clean slippery water fracturing fluid 0.1% JHFR-2D drag reducer + 0.2% JHFD-2 multifunctional additive;2) Oil-based emulsion slippery water fracturing fluid 0.1% A agent + 0.2% B agent;3) Guar gum fracturing fluid 0.1% guanidine gum + 0.5% drainage aid + 0.3% demulsifier. The compatibility, drag reduction performance, reservoir damage, residue content, anti-swelling performance, surface interfacial tension, viscosity and other properties of three different slippery water fracturing fluid systems were studied. Through laboratory experiments, the comprehensive indicators show that clean slippery water fracturing fluid has obvious advantages.
基金funded by the National Natural Science Foundation of China (No.22176123)the Natural Science Foundation of Xinjiang (No.2021D01C036)the National Undergraduate Innovation and Entre-preneurship of China (No.2021110755038)。
文摘VOCs can exert great harm to both human and environment,and catalytic oxidation is believed to be an effective technique to eliminate these pollutants.In this paper,Ag-Mn bimetal catalysts with 10 wt.%of silver were synthesized using doping,impregnation,and reduction methods respectively,and then they were applied to the catalytic oxidation of benzene.Through series of characterizations it showed that the loading of silver using reduction method significantly resulted in improved physico-chemical properties of manganese oxides,such as larger surface area and pore volume,higher proportion of surface Mn~(3+)and Mn~(4+),stronger reducibility and more active of surface oxygen species,which were all beneficial to its catalytic activity.As a result,the Ag-Mn catalysts synthesized by reduction method showed a lower T_(90)value(equals to the temperature at which 90%of initial benzene was removed)of 203℃.Besides,both the used and fresh Ag-Mn catalysts synthesized by reduction method showed preferable stability in this research.
