Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western sectio...Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.展开更多
The Yuxi （豫西） fold-thrust fracture belt is part of the gigantic fold-thrust fracture belt that extends NW in the southern North China plate. The contents of major elements of tectonites were analyzed by ICP-AES. T...The Yuxi （豫西） fold-thrust fracture belt is part of the gigantic fold-thrust fracture belt that extends NW in the southern North China plate. The contents of major elements of tectonites were analyzed by ICP-AES. The analysis of chemical compositions and new stress minerals indicates： extending from the surrounding country rocks to the center of the fracture belt, the Fe2O3 content gradually increases while the FeO content gradually decreases; regular increase, decrease or peak changes are shown for chemical compositions like SiO2, Al2O3, Fe2O3, MgO, CaO, FeO, loss on ignition, TIO：, K2O, Na2 O, etc.. New stress minerals are developed for the south branch and few for the north branch. The characteristics of chemical compositions and new stress minerals of the thrust fracture demonstrate that the fracture belt has undergone a process from a closed reducing environmental system to a relatively open. oxidizing environmental system, andcompressive fractures have resulted from compression in the late stages of evolution, and the dynamothermal metamorphism and thrusting intensities are different between the south and north branches of the belt, which is strong for the south branch but relatively weak for the north branch.展开更多
By analyzing the balanced cross sections and subsidence history of the Longmen Mountain thrust belt, China, we concluded that it had experienced five tectonic stages： （1） the formation stage （T3x） of the miniatur...By analyzing the balanced cross sections and subsidence history of the Longmen Mountain thrust belt, China, we concluded that it had experienced five tectonic stages： （1） the formation stage （T3x） of the miniature of Longmen Mountain, early Indosinian movement, and Anxian tectonic movement created the Longmen Mountain; （2） the stable tectonic stage （J1） where weaker tectonic movement resulted in the Longmen Mountain thrust belt being slightly uplifted and slightly subsiding the foreland basin; （3） the intense tectonic stage （J2-3）, namely the early Yanshan movement; （4） continuous tectonic movement （K-E）, namely the late Yanshan movement and early Himalayan movement; and （5） the formation of Longmen Mountain （N-Q）, namely the late Himalayan movement. During those tectonic deformation stages, the Anxian movement and Himalayan movement played important roles in the Longmen Mountain＇s formation. The Himalayan movement affected Longmen Mountain the most; the strata thrust intensively and were eroded severely. There are some klippes in the middle part of the Longmen Mountain thrust belt because a few nappes were pushed southeastward in later tectonic deformation.展开更多
According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the n...According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.展开更多
Based on forward modeling of detachment fold, this study presents a method to analyze multi-level detachment structures and identify the authenticity of deep-seated anticlines using time-domain seismic section. The st...Based on forward modeling of detachment fold, this study presents a method to analyze multi-level detachment structures and identify the authenticity of deep-seated anticlines using time-domain seismic section. The steps include the conversion of the time-migrated seismic image into depth domain image using a constant velocity field, structural interpretation of the depth seismic image, measurement of each structural relief area and each height above reference level, plotting of area-height relationship chart with piecewise fitting etc. The area-depth correlation can help the division of structural sequences, the definition of detachment levels, the calculation of the tectonic shortening, and the identification of deep-seated structure. The segment area-height relationship is a feature of multi-level detachment structures, while little or no linear correlation between area and height is an indicator of non-deformation or pseudo-anticline. Regardless of the uncertainty of area-height relationship, the segment slopes will correspond to the differential shortenings of multi-level detachments, the intersection between adjacent segments will give the height of detachment surface above reference level and then help define the detachment level in original time-domain seismic section. This method can make use of time-domain seismic data to determine the geologic structure of complicated structure areas and assess risks of deep exploration targets. It has achieved good results in southern Junggar and eastern Sichuan areas.展开更多
酒泉盆地南缘冲断带具有多层次的逆冲结构,包括浅层的远距离冲断系统、中层的近距离冲断系统和深层的原地冲断系统。远距离冲断系统由奥陶系和志留系构成,局部地区表现为飞来峰;近距离冲断系统由古生界和中生界构成,大部分隐伏在远距离...酒泉盆地南缘冲断带具有多层次的逆冲结构,包括浅层的远距离冲断系统、中层的近距离冲断系统和深层的原地冲断系统。远距离冲断系统由奥陶系和志留系构成,局部地区表现为飞来峰;近距离冲断系统由古生界和中生界构成,大部分隐伏在远距离冲断系统之下,局部地带以构造窗的形式出露地表,其变形样式主要为叠瓦状的冲断变形;原地冲断系统隐伏在近距离冲断系统和第四系之下,其南部的变形主要表现为双冲构造或堆垛构造,往NE方向变形逐渐简单,主要表现为断层传播褶皱和断层弯曲褶皱,前锋地带表现为三角带的突起构造。酒泉盆地南缘冲断带的变形是一个具有大缩短量的薄皮冲断系统,旱峡剖面的构造缩短量为52.7 km,缩短率为55.1%。酒泉盆地南缘冲断带的变形时期大致开始于9.0 M a,并以“前展式”向北扩张,变形时间向北变新,前锋断层开始活动时间约为8.3 M a。展开更多
基金Supported by the National Natural Science Foundation of China (41902118)Natural Science Foundation of Xinjiang Uygur Autonomous Region (2022D01B141)+1 种基金Natural Science Foundation of Heilongjiang Province (LH2021D003)Heilongjiang Postdoctoral Fund (No.LBH-Z20045)。
文摘Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.
基金This paper is supported by the Key Basic Research Project funded by theChinese Academy of Sciences (No . KZCX2-SW-117) .
文摘The Yuxi （豫西） fold-thrust fracture belt is part of the gigantic fold-thrust fracture belt that extends NW in the southern North China plate. The contents of major elements of tectonites were analyzed by ICP-AES. The analysis of chemical compositions and new stress minerals indicates： extending from the surrounding country rocks to the center of the fracture belt, the Fe2O3 content gradually increases while the FeO content gradually decreases; regular increase, decrease or peak changes are shown for chemical compositions like SiO2, Al2O3, Fe2O3, MgO, CaO, FeO, loss on ignition, TIO：, K2O, Na2 O, etc.. New stress minerals are developed for the south branch and few for the north branch. The characteristics of chemical compositions and new stress minerals of the thrust fracture demonstrate that the fracture belt has undergone a process from a closed reducing environmental system to a relatively open. oxidizing environmental system, andcompressive fractures have resulted from compression in the late stages of evolution, and the dynamothermal metamorphism and thrusting intensities are different between the south and north branches of the belt, which is strong for the south branch but relatively weak for the north branch.
基金support from the National Natural Science Foundation of China (grant No.40672143,40472107,and 40172076)the National Major Fundamental Research and Development Project (grant No.2005CB422107 and G1999043305)+1 种基金the Development Foundation of Key Laboratory for Hydrocarbon Accumulation of Education Ministry (grant No.2003-03)the Project of Southwestern Exploration and Development Division Company,SINOPEC (GJ-51-0602).
文摘By analyzing the balanced cross sections and subsidence history of the Longmen Mountain thrust belt, China, we concluded that it had experienced five tectonic stages： （1） the formation stage （T3x） of the miniature of Longmen Mountain, early Indosinian movement, and Anxian tectonic movement created the Longmen Mountain; （2） the stable tectonic stage （J1） where weaker tectonic movement resulted in the Longmen Mountain thrust belt being slightly uplifted and slightly subsiding the foreland basin; （3） the intense tectonic stage （J2-3）, namely the early Yanshan movement; （4） continuous tectonic movement （K-E）, namely the late Yanshan movement and early Himalayan movement; and （5） the formation of Longmen Mountain （N-Q）, namely the late Himalayan movement. During those tectonic deformation stages, the Anxian movement and Himalayan movement played important roles in the Longmen Mountain＇s formation. The Himalayan movement affected Longmen Mountain the most; the strata thrust intensively and were eroded severely. There are some klippes in the middle part of the Longmen Mountain thrust belt because a few nappes were pushed southeastward in later tectonic deformation.
基金financially supported by the National Natural Science Foundation of China(No.40972091)
文摘According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.
基金Supported by the China National Science and Technology Major Project(2016ZX 05003-001)
文摘Based on forward modeling of detachment fold, this study presents a method to analyze multi-level detachment structures and identify the authenticity of deep-seated anticlines using time-domain seismic section. The steps include the conversion of the time-migrated seismic image into depth domain image using a constant velocity field, structural interpretation of the depth seismic image, measurement of each structural relief area and each height above reference level, plotting of area-height relationship chart with piecewise fitting etc. The area-depth correlation can help the division of structural sequences, the definition of detachment levels, the calculation of the tectonic shortening, and the identification of deep-seated structure. The segment area-height relationship is a feature of multi-level detachment structures, while little or no linear correlation between area and height is an indicator of non-deformation or pseudo-anticline. Regardless of the uncertainty of area-height relationship, the segment slopes will correspond to the differential shortenings of multi-level detachments, the intersection between adjacent segments will give the height of detachment surface above reference level and then help define the detachment level in original time-domain seismic section. This method can make use of time-domain seismic data to determine the geologic structure of complicated structure areas and assess risks of deep exploration targets. It has achieved good results in southern Junggar and eastern Sichuan areas.
文摘酒泉盆地南缘冲断带具有多层次的逆冲结构,包括浅层的远距离冲断系统、中层的近距离冲断系统和深层的原地冲断系统。远距离冲断系统由奥陶系和志留系构成,局部地区表现为飞来峰;近距离冲断系统由古生界和中生界构成,大部分隐伏在远距离冲断系统之下,局部地带以构造窗的形式出露地表,其变形样式主要为叠瓦状的冲断变形;原地冲断系统隐伏在近距离冲断系统和第四系之下,其南部的变形主要表现为双冲构造或堆垛构造,往NE方向变形逐渐简单,主要表现为断层传播褶皱和断层弯曲褶皱,前锋地带表现为三角带的突起构造。酒泉盆地南缘冲断带的变形是一个具有大缩短量的薄皮冲断系统,旱峡剖面的构造缩短量为52.7 km,缩短率为55.1%。酒泉盆地南缘冲断带的变形时期大致开始于9.0 M a,并以“前展式”向北扩张,变形时间向北变新,前锋断层开始活动时间约为8.3 M a。
