Diesel soot subjected to high exhaust temperature suffers from thermal ageing,which is difficult to be removed by regeneration process.Based on the thermogravimetric(TG)analysis and images by high resolution transmiss...Diesel soot subjected to high exhaust temperature suffers from thermal ageing,which is difficult to be removed by regeneration process.Based on the thermogravimetric(TG)analysis and images by high resolution transmission electron microscope(HRTEM),effects of thermal ageing temperature,ageing time and oxygen concentration on oxidation characteristic of soot are investigated.The activation energy of soot increases with the increase of ageing temperature and oxygen concentration.The activation energy increases rapidly when the ageing time is less than 45 min,and then it keeps in a value of 157 kJ/mol when the ageing time is between 45 and 60 min.Compared to the soot without thermal ageing,the shape of ageing soot particles presents shorter diameter and more regular circle by observing soot nanostructure.With the increase of ageing temperature,ageing time and oxygen concentration,the more stable structure of“shell and core”is shown in the basic carbon.The soot has an increased fringe length,decreased tortuosity and separation distance after thermal ageing process,which leads to the deepening of the disorder degree of soot nanostructures and reduction of soot oxidation activity.Consequently,the thermal ageing process should be avoided in order to optimize the active regeneration strategy.展开更多
Introduction: The stability of orthodontic brackets throughout orthodontic treatment plays a critical role in the treatment’s effectiveness. The present in vitro study was designed to assess the impact of various die...Introduction: The stability of orthodontic brackets throughout orthodontic treatment plays a critical role in the treatment’s effectiveness. The present in vitro study was designed to assess the impact of various dietary components on the performance of orthodontic brackets. Methods: Metal orthodontic brackets were bonded to 66 extracted anterior teeth divided into groups based on the solution type: Milk, Gatorade, Cold Coffee, and a control group using water. Each group consisted of 20 teeth except for the control group, which included six teeth. The bracketed teeth were submerged in their respective solutions for 15 minutes three times daily at different intervals to mimic an in vivo environment and were stored in artificial saliva at room temperature (23?C). The specimens underwent artificial aging through 10,000 cycles of thermocycling (representing one clinical year) between 5?C and 55?C. Shade measurements were taken using a VITA Easy Shade device, capturing the classic shade and L*, a*, and b* values. Delta E values were calculated immediately post-bonding and after 7 days, 1 month, 1, and 2 clinical years. The shear bond strength of each bracket was measured using an ultra-tester machine. Results: After two clinical years, significant differences in ΔE color values were observed across all groups, with the most substantial change noted in teeth immersed in cold coffee. Brackets submerged in milk demonstrated lower shear bond strength than other solutions, whereas the control group exhibited the highest shear bond strength (P = 0.01). Conclusion: The study indicates that dietary components significantly influence tooth color stability and the shear bond strength of orthodontic brackets, underscoring the importance of considering these factors in orthodontic treatment planning.展开更多
The effects of nanosilica（SiO2） on crystallization and thermal aging behaviors of polyethylene terephthalate（PET） have been studied using differential scanning calorimetry（DSC） and polarized optical microscopy（...The effects of nanosilica（SiO2） on crystallization and thermal aging behaviors of polyethylene terephthalate（PET） have been studied using differential scanning calorimetry（DSC） and polarized optical microscopy（POM）, viscometry, tensile testing and scanning electron microscopy（SEM）. For non-isothermal and isothermal crystallizations, the crystallization rate of PET increases considerably with increasing content of SiO2 providing a large number of nucleation sites, but the relative crystallinity of the nanocomposites has little differences with that of neat PET. According to POM observation, the nucleation of PET becomes faster and the nucleation density increases significantly with increasing SiO2 content. For PET and its nanocomposites thermally aged at 190 ℃, the results of intrinsic viscosity, carboxyl content and tensile test show that the degradation rate of PET is reduced with the addition of a small content of SiO2, but the degradation rate increases with further addition of SiO2, owing to the dual effect of SiO2 on PET degradation.展开更多
The corrosion of unaged and 7000-h thermally aged 308 L stainless steel weld metals in simulated PWR primary water under aerated and deaerated conditions was investigated,involving the corrosion of austenite,δ-ferrit...The corrosion of unaged and 7000-h thermally aged 308 L stainless steel weld metals in simulated PWR primary water under aerated and deaerated conditions was investigated,involving the corrosion of austenite,δ-ferrite andδ-ferrite/austenite phase boundary.The results revealed that thermal ageing for 7000 h had a limited effect on the corrosion behavior of 308 L weld metal as it only increased the inner oxide thickness ofδ-ferrite slightly under the deaerated condition.No obvious corrosion enhancement of 308 L weld metal under the aerated condition was found compared to the deaerated condition regardless of the thermal ageing.Nevertheless,Cr-enrichment on the surface of oxide particles,dissolved regions at the metal/oxide interface and localized corrosion along theδ-ferrite/austenite phase boundary occurred under the aerated condition.展开更多
Considering the insulators ageing in a mixture of PVC and dye, set following operating conditions and time to ensure proper operation and perfect safety of industrial installations using insulated conductors. The resu...Considering the insulators ageing in a mixture of PVC and dye, set following operating conditions and time to ensure proper operation and perfect safety of industrial installations using insulated conductors. The results showed that the insulation carried out by the L.C main office was a good quality (on thermal aspect), because the resistance of the insulation is so high (i.e. 3940 Mega Ohms under normal conditions). The results showed a lifespan of 50 years at a temperature of 40°C (close to ambient temperature), plus minus 33 years at a temperature of 70°C;plus minus 22 years at a temperature of 100°C and 12 years at a temperature of 160°C. Furthermore, information on chemical attack, the results showed that PVC cables have poor resistance to sulfuric acid attack (having a pH of 1.5 and a density of 1.84 g/cm<sup>3</sup>). LC/Gecamines is able to produce locally a good quality of electrical cables.展开更多
Both macro and micro-methods were introduced to study the physical and chemical properties of thermal oxidative aging of SBS （styrene-butadiene-styrene） modified asphalt. The physical properties of SBS modified asph...Both macro and micro-methods were introduced to study the physical and chemical properties of thermal oxidative aging of SBS （styrene-butadiene-styrene） modified asphalt. The physical properties of SBS modified asphalt before and after aging were analyzed by normal tests. The structure and quality variation of SBS modified asphalt during the aging process was analyzed by FTIR （Fourier transform infrared spectrum）. FTIR result shows that the degeneration of SBS modified asphalt is mainly caused by oxidative reaction and rupture of C=C double bond. The molecular weight variations of asphalt function groups and SBS polymer were studied by GPC （Gel Permeation Chromatography）. GPC result shows that small molecules transform into larger one in asphalt and SBS polymer molecule degrade during the aging process. SBS polymer may lose its modifying function after long time aging.展开更多
In this work, the growth kinetics of MX （M - metal, X - C/N） nanoprecipitates in type 347H austenitic steel was systematically studied. To investigate the coarsening behavior and the growth mechanism of MX carbonitr...In this work, the growth kinetics of MX （M - metal, X - C/N） nanoprecipitates in type 347H austenitic steel was systematically studied. To investigate the coarsening behavior and the growth mechanism of MX carbonitrides during long-term aging, experiments were performed at 700, 800, 850, and 900℃ for different periods （1, 24, 70, and 100 h）. The precipitation behavior of carbonitrides in specimens subjected to various aging conditions was explored using carbon replicas and transmission electron microscopy （TEM） observations. The corresponding sizes ofMX carbonitrides were measured. The results demonstrates that MX carbonitrides precipitate in type 347H austenitic steel as Nb（C,N）. The coarsening rate constant is time-independent; however, an increase in aging temperature results in an increase in coarsening rate of Nb（C,N）. The coarsening process was analyzed according to the calculated diffusion activation energy of Nb（C,N）. When the aging temperature was 800-900℃, the mean activation energy was 294 kJ·mol -1, and the coarsening behavior was controlled primarily by the diffusion of Nb atoms.展开更多
With the purpose of investigating the effects of confining pressure and aging on the mechanical properties of Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant,tensile tests of thermal accelerate...With the purpose of investigating the effects of confining pressure and aging on the mechanical properties of Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant,tensile tests of thermal accelerated aged propellant samples under room temperature and different confining pressure conditions were performed through the use of a self-made confining pressure device and conventional testing machine.Afterwards,the maximum tensile stressσmand the corresponding strainεm for the propellant under different test conditions were obtained and analyzed.The results indicate that confining pressure and aging can significantly affect the mechanical properties of HTPB propellant,and the coupled effects are very complex.On the one hand,the stressσmincreases as a whole when confining pressure becomes higher or thermal aging time rises.Besides,this stress is more sensitive to aging with increasing confining pressure.There are almost three regions in the stress increments(σm P-σm0)/σm0and thermal aging time curves for HTPB propellant.The maximum value of the stress increment(σm P-σm0)/σm0for the propellant is about 98%at 7.0 MPa and 170 d.On the other hand,the strainεm decreases with increasing thermal aging time under the whole confining pressure conditions.However,the variation of this strain with confining pressure is more complex at various thermal aging time,which is different from that of unaged solid propellant in previous researches.In addition,this strain is slightly less sensitive to aging as the confining pressure increases.Furthermore,there is also a critical confining pressure in this investigation,whose value is between 0.15 MPa and 4.0 MPa.Beyond this critical pressure,the trends of the stressσmand the corresponding strainεm all change.Moreover,there are some critical thermal aging time for the stress increment(σm P-σm0)/σm0and strain increment(εm P-εm0)/εm0of HTPB propellant in this investigation,which are about at 35,50 and 170 d.Finally,based on the twin-shear strength theory,a new modified nonlinear strength criterion of thermal aged HTPB propellant under confining pressure was proposed.And the whole errors of fitted results are lower than 6%.Therefore,the proposed strength criterion can be selected as a failure criterion for the analysis the failure properties of aged HTPB propellant under different confining pressures,the structural integrity of solid propellant grain and the safety of solid rocket motor during ignition operation after long periods of storage.展开更多
In this work,the characterizations of Cu-SSZ-13 after hydrothermal aging(HTA)and thermal aging(TA)at different temperatures(750,800,and 850°C)are compared,and the differences between those two serious aged sample...In this work,the characterizations of Cu-SSZ-13 after hydrothermal aging(HTA)and thermal aging(TA)at different temperatures(750,800,and 850°C)are compared,and the differences between those two serious aged samples are analyzed.With this data,the effect of steam on catalysts deactivation during hydrothermal aging is analyzed.The TA at 750 and 800°C causes the dealumination and the agglomeration of Cu^(2+)ions to Cu O,resulting in the activity loss of Cu-SSZ-13.The presence of steam upon HTA at750 and 800°C aggravates the catalyst deactivation by increasing the Al detachment and the Cu^(2+)agglomeration.The structure and cupric state are almost the same in the Cu-SSZ-13 after TA and HTA at 850°C,respectively,indicating that the steam has little influence on the deactivation.The formation of CuAl_(2)O_(4) spinel is the primary reason for the deactivation after both HTA and TA at 850°C,probably attributed to the strong interaction between Cu^(2+)ions and framework Al sites at high temperatures.展开更多
Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power pla...Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power plant.As-welded and reheated regions mainly consist of acicular and polygonal ferrite,respectively.Fractographic examination of Charpy V-notch impact toughness specimens reveals large inclusions(0.5-2.5μm)at the brittle fracture primary initiation sites.High impact energies were measured for the specimens in which brittle fracture was initiated from a small inclusion or an inclusion away from the V-notch.The density,geometry,and chemical composition of the primary initiation inclusions were investigated.A brittle fracture crack initiates as a microcrack either within the multiphase oxide inclusions or from the debonded interfaces between the uncracked inclusions and weld metal matrix.Primary fracture sites can be determined in all the specimens tested in the lower part of the transition curve at and below the 41-J reference impact toughness energy but not above the mentioned value because of the changes in the fracture mechanism and resulting changes in the fracture appearance.展开更多
Microstructure evolution in neutron irradiated Reactor Pressure Vessel （RPV） steels was experimentally simulated through an improved degradation procedure in this study. The degradation procedure includes austenitiz...Microstructure evolution in neutron irradiated Reactor Pressure Vessel （RPV） steels was experimentally simulated through an improved degradation procedure in this study. The degradation procedure includes austenitizing at 1 150℃ and water quench, deformation 10% and 30% respectively, and then thermal aging at 500℃ for different period of time. The microstructure of the specimens was analyzed in details using transmission electron microscopy （TEM）. The micro-hardness test results showed that all the hardness curves of undeformed, 10% pre-deformed and 30% pre-deformed specimens have two micro-hardness peaks with the first peak value corresponding to different thermal aging time of 1 hour, 5 hours and 10 hours, respectively. It was revealed that the hardness curves were influenced by the precipitation of Cu-rich precipitates （CRPs） and carbides, deposition of martensite and work hardening.展开更多
A method of estimating the safe storage life （τ）, self-accelerating decomposition temperature （TsADT） and critical temperature of thermal explosion （Tb） of double-base propellant using isothermal and non-isothe...A method of estimating the safe storage life （τ）, self-accelerating decomposition temperature （TsADT） and critical temperature of thermal explosion （Tb） of double-base propellant using isothermal and non-isothermal decomposition behaviours is presented. For double-base propellant composed of 56±1wt% of nitrocellulose （NC）, 27±0.5wt% of nitroglycerine （NG）, 8.15±0.15wt% of dinitrotoluene （DNT）, 2.5±0.1wt% of methyl centralite, 5.0±0.15wt% of catalyst and 1.0±0.1wt% of other, the values of r of 49.4 years at 40℃, of TSAOT of 151.35℃ and of Tb of 163.01℃ were obtained.展开更多
The effect of thermal cycling and aging in martensitic state in Ti-Pd-Ni alloys were investigated by DSC and TEM observations. It is shown that the thermal cycling causes the decreases in M, and Af temperatures in Ti5...The effect of thermal cycling and aging in martensitic state in Ti-Pd-Ni alloys were investigated by DSC and TEM observations. It is shown that the thermal cycling causes the decreases in M, and Af temperatures in Ti50Pd50-xNix (x=10, 20, 30) alloys, but no obvious thermal cycling effect was observed in Ti50Pd50Pd40Ni10 alloys and the aging effect shows a curious feature, i.e., the Af temperature does not saturate even after relatively long time aging, which is considered to be due to the occurrence of recovery recrystallization during aging.展开更多
A 9 Cr-oxide dispersion strengthened(ODS)steel was thermally aged at 873 K for up to 5000 h.The size distribution and chemical composition of the dispersed oxide nanoparticles were analyzed by small-angle neutron scat...A 9 Cr-oxide dispersion strengthened(ODS)steel was thermally aged at 873 K for up to 5000 h.The size distribution and chemical composition of the dispersed oxide nanoparticles were analyzed by small-angle neutron scattering under a magnetic field.Combined with transmission electron microscopy,Vickers micro-hardness tests and electron backscattered diffraction measurements,all the results showed that the thermal treatment had little or no effect on the size distributions and volume fractions of the oxide nanoparticles in the ferromagnetic matrix,which suggested excellent thermal stability of the 9 Cr-ODS steel.展开更多
The life of shipboard cables will decrease due to the complex aging processes. In terms of the safety perspective, remaining life prediction of the cable is essential to maintain a reliable operation. In this paper, f...The life of shipboard cables will decrease due to the complex aging processes. In terms of the safety perspective, remaining life prediction of the cable is essential to maintain a reliable operation. In this paper, firstly, based on Arrhenius equation, residual life of new styrene-butadiene cable is calculated; result indicates that the degradation rate which changes with time is proportional to thermal temperature. Then second order dynamic model is adopted into the residual life prediction, combined with the time-temperature superposition method(TTSP), and a new residual life model is proposed. According to the accelerated thermal aging experiment data and Arrhenius equation, TTSP method demonstrates to be an efficient way for life prediction, and life at normal temperature can be estimated by this model. In order to monitor the state of styrene-butadiene cable more accurately, an improved residual life model based on equivalent environment temperature of cable is proposed, and life of cable under real operation is analyzed. Result indicates that this model is credible and reliable, and it provides an important theoretical base for residual life of cables.展开更多
The thermal aging behavior of poly （ vinyl alcohol ） （ PVA ） hydrogel was studied at four different temperatures of 40 ℃, 50 ℃, 60 ℃ and 70 ℃ in one year. The samples of PVA hydrogel were closely covered by pl...The thermal aging behavior of poly （ vinyl alcohol ） （ PVA ） hydrogel was studied at four different temperatures of 40 ℃, 50 ℃, 60 ℃ and 70 ℃ in one year. The samples of PVA hydrogel were closely covered by plastic film. The changes of their chemical structures and physical properties during aging were measured through different measurable techniques including tensile testing, gel permeation chromatography （ GPC ）, viscosity analysis, and Fourier transform infrared （FTIR） spec- trum. The results showed that the molecular weight of PVA in hydrogel changed little with time and temperature. FTIR spectra of PVA in all the samples were similar to those of the original samples. The tensile strength of PVA hydrogel didn＇t change until the 330th days.展开更多
： The effect of isothermal aging treatment on the mechanical and corrosion properties of 2205 duplex stainless steel was investigated by means of impact toughness test and micro-hardness measurement in combination wi...： The effect of isothermal aging treatment on the mechanical and corrosion properties of 2205 duplex stainless steel was investigated by means of impact toughness test and micro-hardness measurement in combination with the critical pitting temperature （CPT） technique. The corresponding fractography of the steel was then observed after the impact toughness test. The results demonstrated that, at the critical temperature for precipitation of the sigma （σ） phase, e. g., 850 ℃, the impact toughness decreased rapidly and the micro-hardness increased gradually with increasing aging time. The CPT decreased from 61 to 15 ℃ as the aging time increased from 4 rain to 8 h. In addition, optical microscopy, transmission electron microscope （TEM） and X-ray diffraction studies showed that the ferrite in the steel transformed into secondary austenite and σ phase.展开更多
The degradation of crosslinked polyethylene (XLPE) cable insulation during service, such as thermo-oxidation and water treeing may lead to a premature electrical breakdown of the XLPE insulation cables. Therefore, it ...The degradation of crosslinked polyethylene (XLPE) cable insulation during service, such as thermo-oxidation and water treeing may lead to a premature electrical breakdown of the XLPE insulation cables. Therefore, it is necessary to optimize the period of replacement to evenly distribute the replacement cost by ascertaining the deterioration degree. Estimation of the aging degree is at present the most important task for diagnosis of the residual lifetime of the power cable insulation. This paper presents a study on the changes in the dielectric properties of the thermally aged XLPE cables in the frequency range from 0.07～10 MHz. Based on electrical and physicochemical characterization, some new "dactylograms" for the thermally aged XLPE cable insulation have been proposed.展开更多
The purpose of this work is to determine the impact of thermal aging on the dielectric and physicochemical properties of the oil/paper mixed insulation. We performed a comparative analysis of dielectric paper dipped i...The purpose of this work is to determine the impact of thermal aging on the dielectric and physicochemical properties of the oil/paper mixed insulation. We performed a comparative analysis of dielectric paper dipped in two cooling fluids: palm kernel oil methyl ester (MEPKO) and mineral oil (MO). Two types of dielectric paper were used: Thermally Upgraded Kraft paper (TUK) and Nomex-910 paper (NP-910). An accelerated aging test was realized at 110<span style="white-space:nowrap;">°</span>C during a total of 96 hours. Samples of oil and paper were collected after 0, 48, 72 and 96 hours for analyses purposes. The analyses performed included the measurement of the Breakdown voltage (BDV) of the dielectric papers, the Total Acid Number (TAN) and the Decay Dissolved Products (DDP) of the liquid dielectrics. The BDV of NP-910 is greater than the BDV of TUK. Concerning the type of oil, the BDV of dielectric papers impregnated with MEPKO is greater than the BDV of similar papers impregnated with MO, indicating a better preservation of paper when dipped in methyl esters. The analyses of TAN and DDP revealed that Nomex-910 improves the oxidation stability of MO, but reduces the oxidation stability of MEPKO. These results prove that methyl esters can be used as a substitute to replace mineral oils in power transformers. Furthermore, they show that NP can be used mainly in areas of transformer where solid insulation is subjected to high thermal and electrical stress, and TUK other places where solid insulation is required. Such combination could assure money savings and a better preservation of the oil viscosity.展开更多
The effect of thermal aging on the fatigue crack growth（FCG） behavior of Z3CN20？09M cast duplex stainless steel with low ferrite content was investigated in this study. The crack surfaces and crack growth paths wer...The effect of thermal aging on the fatigue crack growth（FCG） behavior of Z3CN20？09M cast duplex stainless steel with low ferrite content was investigated in this study. The crack surfaces and crack growth paths were analyzed to clarify the FCG mechanisms. The microstructure and micromechanical properties before and after thermal aging were also studied. Spinodal decomposition in the aged ferrite phase led to an increase in the hardness and a decrease in the plastic deformation capacity, whereas the hardness and plastic deformation capacity of the austenite phase were almost unchanged after thermal aging. The aged material exhibited a better FCG resistance than the unaged material in the near-threshold regime because of the increased roughness-induced crack closure associated with the tortuous crack path and rougher fracture surface; however, the tendency was reversed in the Paris regime because of the cleavage fracture in the aged ferrite phases.展开更多
基金Project(51676167)supported by the National Natural Science Foundation of ChinaProject(17TD0035)supported by the Sichuan Provincial Scientific Research Innovation Team Program,ChinaProjects(2017TD0026,2015TD0021)supported by Science&Technology Department of Sichuan Province,China。
文摘Diesel soot subjected to high exhaust temperature suffers from thermal ageing,which is difficult to be removed by regeneration process.Based on the thermogravimetric(TG)analysis and images by high resolution transmission electron microscope(HRTEM),effects of thermal ageing temperature,ageing time and oxygen concentration on oxidation characteristic of soot are investigated.The activation energy of soot increases with the increase of ageing temperature and oxygen concentration.The activation energy increases rapidly when the ageing time is less than 45 min,and then it keeps in a value of 157 kJ/mol when the ageing time is between 45 and 60 min.Compared to the soot without thermal ageing,the shape of ageing soot particles presents shorter diameter and more regular circle by observing soot nanostructure.With the increase of ageing temperature,ageing time and oxygen concentration,the more stable structure of“shell and core”is shown in the basic carbon.The soot has an increased fringe length,decreased tortuosity and separation distance after thermal ageing process,which leads to the deepening of the disorder degree of soot nanostructures and reduction of soot oxidation activity.Consequently,the thermal ageing process should be avoided in order to optimize the active regeneration strategy.
文摘Introduction: The stability of orthodontic brackets throughout orthodontic treatment plays a critical role in the treatment’s effectiveness. The present in vitro study was designed to assess the impact of various dietary components on the performance of orthodontic brackets. Methods: Metal orthodontic brackets were bonded to 66 extracted anterior teeth divided into groups based on the solution type: Milk, Gatorade, Cold Coffee, and a control group using water. Each group consisted of 20 teeth except for the control group, which included six teeth. The bracketed teeth were submerged in their respective solutions for 15 minutes three times daily at different intervals to mimic an in vivo environment and were stored in artificial saliva at room temperature (23?C). The specimens underwent artificial aging through 10,000 cycles of thermocycling (representing one clinical year) between 5?C and 55?C. Shade measurements were taken using a VITA Easy Shade device, capturing the classic shade and L*, a*, and b* values. Delta E values were calculated immediately post-bonding and after 7 days, 1 month, 1, and 2 clinical years. The shear bond strength of each bracket was measured using an ultra-tester machine. Results: After two clinical years, significant differences in ΔE color values were observed across all groups, with the most substantial change noted in teeth immersed in cold coffee. Brackets submerged in milk demonstrated lower shear bond strength than other solutions, whereas the control group exhibited the highest shear bond strength (P = 0.01). Conclusion: The study indicates that dietary components significantly influence tooth color stability and the shear bond strength of orthodontic brackets, underscoring the importance of considering these factors in orthodontic treatment planning.
基金financially supported by the Jiangsu Yuxing Film Technology Co.Ltd.,China
文摘The effects of nanosilica（SiO2） on crystallization and thermal aging behaviors of polyethylene terephthalate（PET） have been studied using differential scanning calorimetry（DSC） and polarized optical microscopy（POM）, viscometry, tensile testing and scanning electron microscopy（SEM）. For non-isothermal and isothermal crystallizations, the crystallization rate of PET increases considerably with increasing content of SiO2 providing a large number of nucleation sites, but the relative crystallinity of the nanocomposites has little differences with that of neat PET. According to POM observation, the nucleation of PET becomes faster and the nucleation density increases significantly with increasing SiO2 content. For PET and its nanocomposites thermally aged at 190 ℃, the results of intrinsic viscosity, carboxyl content and tensile test show that the degradation rate of PET is reduced with the addition of a small content of SiO2, but the degradation rate increases with further addition of SiO2, owing to the dual effect of SiO2 on PET degradation.
基金financially supported by the National Natural Science Foundation of China(No.52071018)the Gusu Innovation Leader Talents Program(ZXL2017112)。
文摘The corrosion of unaged and 7000-h thermally aged 308 L stainless steel weld metals in simulated PWR primary water under aerated and deaerated conditions was investigated,involving the corrosion of austenite,δ-ferrite andδ-ferrite/austenite phase boundary.The results revealed that thermal ageing for 7000 h had a limited effect on the corrosion behavior of 308 L weld metal as it only increased the inner oxide thickness ofδ-ferrite slightly under the deaerated condition.No obvious corrosion enhancement of 308 L weld metal under the aerated condition was found compared to the deaerated condition regardless of the thermal ageing.Nevertheless,Cr-enrichment on the surface of oxide particles,dissolved regions at the metal/oxide interface and localized corrosion along theδ-ferrite/austenite phase boundary occurred under the aerated condition.
文摘Considering the insulators ageing in a mixture of PVC and dye, set following operating conditions and time to ensure proper operation and perfect safety of industrial installations using insulated conductors. The results showed that the insulation carried out by the L.C main office was a good quality (on thermal aspect), because the resistance of the insulation is so high (i.e. 3940 Mega Ohms under normal conditions). The results showed a lifespan of 50 years at a temperature of 40°C (close to ambient temperature), plus minus 33 years at a temperature of 70°C;plus minus 22 years at a temperature of 100°C and 12 years at a temperature of 160°C. Furthermore, information on chemical attack, the results showed that PVC cables have poor resistance to sulfuric acid attack (having a pH of 1.5 and a density of 1.84 g/cm<sup>3</sup>). LC/Gecamines is able to produce locally a good quality of electrical cables.
基金Funded by the National Natural Science Foundation of China(Nos.50878054,51108081)
文摘Both macro and micro-methods were introduced to study the physical and chemical properties of thermal oxidative aging of SBS （styrene-butadiene-styrene） modified asphalt. The physical properties of SBS modified asphalt before and after aging were analyzed by normal tests. The structure and quality variation of SBS modified asphalt during the aging process was analyzed by FTIR （Fourier transform infrared spectrum）. FTIR result shows that the degeneration of SBS modified asphalt is mainly caused by oxidative reaction and rupture of C=C double bond. The molecular weight variations of asphalt function groups and SBS polymer were studied by GPC （Gel Permeation Chromatography）. GPC result shows that small molecules transform into larger one in asphalt and SBS polymer molecule degrade during the aging process. SBS polymer may lose its modifying function after long time aging.
基金the China National Funds for Distinguished Young Scientists (No.51325401)the National High Technology Research and Development Program of China (No.2015AA042504)the National Natural Science Foundation of China (No.51474156) for financial support
文摘In this work, the growth kinetics of MX （M - metal, X - C/N） nanoprecipitates in type 347H austenitic steel was systematically studied. To investigate the coarsening behavior and the growth mechanism of MX carbonitrides during long-term aging, experiments were performed at 700, 800, 850, and 900℃ for different periods （1, 24, 70, and 100 h）. The precipitation behavior of carbonitrides in specimens subjected to various aging conditions was explored using carbon replicas and transmission electron microscopy （TEM） observations. The corresponding sizes ofMX carbonitrides were measured. The results demonstrates that MX carbonitrides precipitate in type 347H austenitic steel as Nb（C,N）. The coarsening rate constant is time-independent; however, an increase in aging temperature results in an increase in coarsening rate of Nb（C,N）. The coarsening process was analyzed according to the calculated diffusion activation energy of Nb（C,N）. When the aging temperature was 800-900℃, the mean activation energy was 294 kJ·mol -1, and the coarsening behavior was controlled primarily by the diffusion of Nb atoms.
基金the financial support of the National Natural Funds in China(No.11772352)the Science project of Shaanxi Province(Nos.20190504 and 2019SZS-09)。
文摘With the purpose of investigating the effects of confining pressure and aging on the mechanical properties of Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant,tensile tests of thermal accelerated aged propellant samples under room temperature and different confining pressure conditions were performed through the use of a self-made confining pressure device and conventional testing machine.Afterwards,the maximum tensile stressσmand the corresponding strainεm for the propellant under different test conditions were obtained and analyzed.The results indicate that confining pressure and aging can significantly affect the mechanical properties of HTPB propellant,and the coupled effects are very complex.On the one hand,the stressσmincreases as a whole when confining pressure becomes higher or thermal aging time rises.Besides,this stress is more sensitive to aging with increasing confining pressure.There are almost three regions in the stress increments(σm P-σm0)/σm0and thermal aging time curves for HTPB propellant.The maximum value of the stress increment(σm P-σm0)/σm0for the propellant is about 98%at 7.0 MPa and 170 d.On the other hand,the strainεm decreases with increasing thermal aging time under the whole confining pressure conditions.However,the variation of this strain with confining pressure is more complex at various thermal aging time,which is different from that of unaged solid propellant in previous researches.In addition,this strain is slightly less sensitive to aging as the confining pressure increases.Furthermore,there is also a critical confining pressure in this investigation,whose value is between 0.15 MPa and 4.0 MPa.Beyond this critical pressure,the trends of the stressσmand the corresponding strainεm all change.Moreover,there are some critical thermal aging time for the stress increment(σm P-σm0)/σm0and strain increment(εm P-εm0)/εm0of HTPB propellant in this investigation,which are about at 35,50 and 170 d.Finally,based on the twin-shear strength theory,a new modified nonlinear strength criterion of thermal aged HTPB propellant under confining pressure was proposed.And the whole errors of fitted results are lower than 6%.Therefore,the proposed strength criterion can be selected as a failure criterion for the analysis the failure properties of aged HTPB propellant under different confining pressures,the structural integrity of solid propellant grain and the safety of solid rocket motor during ignition operation after long periods of storage.
基金supported by the National Key Research and Development Program of China (2018YFC0214103)the National Natural Science Foundation of China (22006044)the Scientific Research Funds of Huaqiao University (605-50Y200270001)。
文摘In this work,the characterizations of Cu-SSZ-13 after hydrothermal aging(HTA)and thermal aging(TA)at different temperatures(750,800,and 850°C)are compared,and the differences between those two serious aged samples are analyzed.With this data,the effect of steam on catalysts deactivation during hydrothermal aging is analyzed.The TA at 750 and 800°C causes the dealumination and the agglomeration of Cu^(2+)ions to Cu O,resulting in the activity loss of Cu-SSZ-13.The presence of steam upon HTA at750 and 800°C aggravates the catalyst deactivation by increasing the Al detachment and the Cu^(2+)agglomeration.The structure and cupric state are almost the same in the Cu-SSZ-13 after TA and HTA at 850°C,respectively,indicating that the steam has little influence on the deactivation.The formation of CuAl_(2)O_(4) spinel is the primary reason for the deactivation after both HTA and TA at 850°C,probably attributed to the strong interaction between Cu^(2+)ions and framework Al sites at high temperatures.
基金the SAFIR2022 BRUTE project (Barseback RPV material used for true evaluation of embrittlement) for funding the study
文摘Effects of the weld microstructure and inclusions on brittle fracture initiation are investigated in a thermally aged ferritic high-nickel weld of a reactor pressure vessel head from a decommissioned nuclear power plant.As-welded and reheated regions mainly consist of acicular and polygonal ferrite,respectively.Fractographic examination of Charpy V-notch impact toughness specimens reveals large inclusions(0.5-2.5μm)at the brittle fracture primary initiation sites.High impact energies were measured for the specimens in which brittle fracture was initiated from a small inclusion or an inclusion away from the V-notch.The density,geometry,and chemical composition of the primary initiation inclusions were investigated.A brittle fracture crack initiates as a microcrack either within the multiphase oxide inclusions or from the debonded interfaces between the uncracked inclusions and weld metal matrix.Primary fracture sites can be determined in all the specimens tested in the lower part of the transition curve at and below the 41-J reference impact toughness energy but not above the mentioned value because of the changes in the fracture mechanism and resulting changes in the fracture appearance.
文摘Microstructure evolution in neutron irradiated Reactor Pressure Vessel （RPV） steels was experimentally simulated through an improved degradation procedure in this study. The degradation procedure includes austenitizing at 1 150℃ and water quench, deformation 10% and 30% respectively, and then thermal aging at 500℃ for different period of time. The microstructure of the specimens was analyzed in details using transmission electron microscopy （TEM）. The micro-hardness test results showed that all the hardness curves of undeformed, 10% pre-deformed and 30% pre-deformed specimens have two micro-hardness peaks with the first peak value corresponding to different thermal aging time of 1 hour, 5 hours and 10 hours, respectively. It was revealed that the hardness curves were influenced by the precipitation of Cu-rich precipitates （CRPs） and carbides, deposition of martensite and work hardening.
基金We are grateful to the National Natural Science Foundation of China （No. 20573098）
文摘A method of estimating the safe storage life （τ）, self-accelerating decomposition temperature （TsADT） and critical temperature of thermal explosion （Tb） of double-base propellant using isothermal and non-isothermal decomposition behaviours is presented. For double-base propellant composed of 56±1wt% of nitrocellulose （NC）, 27±0.5wt% of nitroglycerine （NG）, 8.15±0.15wt% of dinitrotoluene （DNT）, 2.5±0.1wt% of methyl centralite, 5.0±0.15wt% of catalyst and 1.0±0.1wt% of other, the values of r of 49.4 years at 40℃, of TSAOT of 151.35℃ and of Tb of 163.01℃ were obtained.
基金This work was supported by a Grant-in-Aid fOrEncouragement of Young Scientists (W.C.) (l998-1999) from the Ministry of Educat
文摘The effect of thermal cycling and aging in martensitic state in Ti-Pd-Ni alloys were investigated by DSC and TEM observations. It is shown that the thermal cycling causes the decreases in M, and Af temperatures in Ti50Pd50-xNix (x=10, 20, 30) alloys, but no obvious thermal cycling effect was observed in Ti50Pd50Pd40Ni10 alloys and the aging effect shows a curious feature, i.e., the Af temperature does not saturate even after relatively long time aging, which is considered to be due to the occurrence of recovery recrystallization during aging.
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFB0702400)。
文摘A 9 Cr-oxide dispersion strengthened(ODS)steel was thermally aged at 873 K for up to 5000 h.The size distribution and chemical composition of the dispersed oxide nanoparticles were analyzed by small-angle neutron scattering under a magnetic field.Combined with transmission electron microscopy,Vickers micro-hardness tests and electron backscattered diffraction measurements,all the results showed that the thermal treatment had little or no effect on the size distributions and volume fractions of the oxide nanoparticles in the ferromagnetic matrix,which suggested excellent thermal stability of the 9 Cr-ODS steel.
文摘The life of shipboard cables will decrease due to the complex aging processes. In terms of the safety perspective, remaining life prediction of the cable is essential to maintain a reliable operation. In this paper, firstly, based on Arrhenius equation, residual life of new styrene-butadiene cable is calculated; result indicates that the degradation rate which changes with time is proportional to thermal temperature. Then second order dynamic model is adopted into the residual life prediction, combined with the time-temperature superposition method(TTSP), and a new residual life model is proposed. According to the accelerated thermal aging experiment data and Arrhenius equation, TTSP method demonstrates to be an efficient way for life prediction, and life at normal temperature can be estimated by this model. In order to monitor the state of styrene-butadiene cable more accurately, an improved residual life model based on equivalent environment temperature of cable is proposed, and life of cable under real operation is analyzed. Result indicates that this model is credible and reliable, and it provides an important theoretical base for residual life of cables.
文摘The thermal aging behavior of poly （ vinyl alcohol ） （ PVA ） hydrogel was studied at four different temperatures of 40 ℃, 50 ℃, 60 ℃ and 70 ℃ in one year. The samples of PVA hydrogel were closely covered by plastic film. The changes of their chemical structures and physical properties during aging were measured through different measurable techniques including tensile testing, gel permeation chromatography （ GPC ）, viscosity analysis, and Fourier transform infrared （FTIR） spec- trum. The results showed that the molecular weight of PVA in hydrogel changed little with time and temperature. FTIR spectra of PVA in all the samples were similar to those of the original samples. The tensile strength of PVA hydrogel didn＇t change until the 330th days.
文摘： The effect of isothermal aging treatment on the mechanical and corrosion properties of 2205 duplex stainless steel was investigated by means of impact toughness test and micro-hardness measurement in combination with the critical pitting temperature （CPT） technique. The corresponding fractography of the steel was then observed after the impact toughness test. The results demonstrated that, at the critical temperature for precipitation of the sigma （σ） phase, e. g., 850 ℃, the impact toughness decreased rapidly and the micro-hardness increased gradually with increasing aging time. The CPT decreased from 61 to 15 ℃ as the aging time increased from 4 rain to 8 h. In addition, optical microscopy, transmission electron microscope （TEM） and X-ray diffraction studies showed that the ferrite in the steel transformed into secondary austenite and σ phase.
基金Major Research Project of Shanghai City(No. 045211024)
文摘The degradation of crosslinked polyethylene (XLPE) cable insulation during service, such as thermo-oxidation and water treeing may lead to a premature electrical breakdown of the XLPE insulation cables. Therefore, it is necessary to optimize the period of replacement to evenly distribute the replacement cost by ascertaining the deterioration degree. Estimation of the aging degree is at present the most important task for diagnosis of the residual lifetime of the power cable insulation. This paper presents a study on the changes in the dielectric properties of the thermally aged XLPE cables in the frequency range from 0.07～10 MHz. Based on electrical and physicochemical characterization, some new "dactylograms" for the thermally aged XLPE cable insulation have been proposed.
文摘The purpose of this work is to determine the impact of thermal aging on the dielectric and physicochemical properties of the oil/paper mixed insulation. We performed a comparative analysis of dielectric paper dipped in two cooling fluids: palm kernel oil methyl ester (MEPKO) and mineral oil (MO). Two types of dielectric paper were used: Thermally Upgraded Kraft paper (TUK) and Nomex-910 paper (NP-910). An accelerated aging test was realized at 110<span style="white-space:nowrap;">°</span>C during a total of 96 hours. Samples of oil and paper were collected after 0, 48, 72 and 96 hours for analyses purposes. The analyses performed included the measurement of the Breakdown voltage (BDV) of the dielectric papers, the Total Acid Number (TAN) and the Decay Dissolved Products (DDP) of the liquid dielectrics. The BDV of NP-910 is greater than the BDV of TUK. Concerning the type of oil, the BDV of dielectric papers impregnated with MEPKO is greater than the BDV of similar papers impregnated with MO, indicating a better preservation of paper when dipped in methyl esters. The analyses of TAN and DDP revealed that Nomex-910 improves the oxidation stability of MO, but reduces the oxidation stability of MEPKO. These results prove that methyl esters can be used as a substitute to replace mineral oils in power transformers. Furthermore, they show that NP can be used mainly in areas of transformer where solid insulation is subjected to high thermal and electrical stress, and TUK other places where solid insulation is required. Such combination could assure money savings and a better preservation of the oil viscosity.
基金financially supported by the National High-Tech Research and Development Program of China (Nos. 2012AA03A507 and 2012AA050901)
文摘The effect of thermal aging on the fatigue crack growth（FCG） behavior of Z3CN20？09M cast duplex stainless steel with low ferrite content was investigated in this study. The crack surfaces and crack growth paths were analyzed to clarify the FCG mechanisms. The microstructure and micromechanical properties before and after thermal aging were also studied. Spinodal decomposition in the aged ferrite phase led to an increase in the hardness and a decrease in the plastic deformation capacity, whereas the hardness and plastic deformation capacity of the austenite phase were almost unchanged after thermal aging. The aged material exhibited a better FCG resistance than the unaged material in the near-threshold regime because of the increased roughness-induced crack closure associated with the tortuous crack path and rougher fracture surface; however, the tendency was reversed in the Paris regime because of the cleavage fracture in the aged ferrite phases.
