High applied thermal-stability and superior structural property for activated carbon adsorbent are extremely promising,which also is the determining short slab in volatile organic compounds(VOCs)adsorption application...High applied thermal-stability and superior structural property for activated carbon adsorbent are extremely promising,which also is the determining short slab in volatile organic compounds(VOCs)adsorption applications.Herein,we develop the outstanding engineering carbon adsorbents from waste shaddock peel which affords greatly-enhanced thermal-stability and super structural property(S_(Lang)=4962.6 m2·g^(-1),Vmicro=1.67 cm^(3)·g^(-1)).Such character endows the obtained adsorbent with ultrahigh adsorption capture performance of VOCs specific to benzene(16.58 mmol·g^(-1))and toluene(15.50 mmol·g^(-1),far beyond traditional zeolite and activated carbon even MOFs materials.The structural expression characters were accurately correlated with excellent adsorption efficiency of VOCs by studying synthetic factor-controlling comparative samples.Ulteriorly,adsorption selectivity prediction at different relative humidity was demonstrated through DIH(difference of the isosteric heats),exceedingly highlighting great superiority(nearly sixfold)in selective adsorption of toluene compared to volatile benzene.Our findings provide the possibility for practical industrial application and fabrication of waste biomass-derived outstanding biochar adsorbent in the environmental treatment of threatening VOCs pollutants.展开更多
We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS...We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS） curing system. With the characterization using water contact angle （WCA） tester, Fourier transform infrared spectroscopy （FTIR）, scanning electron microscope （SEM）, atomic force microscopy （AFM） and simultaneous thermal analysis, the as-prepared coating displayed a tremendous WCA of 154.8±1°, sliding angle （SA） about 3.5° and stable self-cleaning property range from -10 to 80 ℃. It was also found that the synergistic effect of surface micro-nano hierarchical structure and chemical hydrophobicity, stability from matrix had made contributions to the superhydrophobicity and excellent heat resistance up to 300 ℃.展开更多
The research shows that the selection of pavement type is very important for the thermal stability of high-grade highway embankment in permafrost regions because of the different solar absorption rates between asphalt...The research shows that the selection of pavement type is very important for the thermal stability of high-grade highway embankment in permafrost regions because of the different solar absorption rates between asphalt concrete and asphalt concrete pavement.In this paper,the common embankment of high-grade highway in permafrost regions is selected as the research object to study the influence of asphalt concrete and cement concrete pavement on the embankment temperature,freeze-thaw cycle process and the change law of the permafrost table,which provides a basis for the use of reasonable pavement materials in permafrost regions.展开更多
A new series of (E)-5-[2-(N-hexylcarbazolyl)vinyl]furan chromophores with various accepters have been synthesized by the Knoevenagel condensation of (E)-5-[2-(N- hexylcarbazolyl) vinyl]-2-furaldehydes with malononitri...A new series of (E)-5-[2-(N-hexylcarbazolyl)vinyl]furan chromophores with various accepters have been synthesized by the Knoevenagel condensation of (E)-5-[2-(N- hexylcarbazolyl) vinyl]-2-furaldehydes with malononitrile, 1,3-diethyl-2-thiobarbituric acid, or 3-phenyl-5-isoxazol one, respectively. They are characterized by H-1-NMR, FT- IR, UV-VIS, MS and elemental analysis, and have shown strong solvatochromism and high thermal stability.展开更多
This paper analyses the reverse recovery characteristics and mechanism of SiGeC p-i-n diodes. Based on the integrated systems engineering （ISE） data, the critical physical models of SiGeC diodes are proposed. Based ...This paper analyses the reverse recovery characteristics and mechanism of SiGeC p-i-n diodes. Based on the integrated systems engineering （ISE） data, the critical physical models of SiGeC diodes are proposed. Based on heterojunction band gap engineering, the softness factor increases over six times, reverse recovery time is over 30% short and there is a 20% decrease in peak reverse recovery current for SiGeC diodes with 20% of germanium and 0.5% of carbon, compared to Si diodes. Those advantages of SiGeC p-i-n diodes are more obvious at high temperature. Compared to lifetime control, SiCeC technique is more suitable for improving diode properties and the tradeoff between reverse recovery time and forward voltage drop can be easily achieved in SiGeC diodes. Furthermore, the high thermal-stability of SiGeC diodes reduces the costs of further process steps and offers more freedoms to device design.展开更多
By repeatedly pre-cleaning the sputtering chamber with Ar gas and in-situ isochronal annealing samples, NiSi films are successfully prepared on Si （100） substrates in a radio-frequency magnetron sputtering system. A...By repeatedly pre-cleaning the sputtering chamber with Ar gas and in-situ isochronal annealing samples, NiSi films are successfully prepared on Si （100） substrates in a radio-frequency magnetron sputtering system. A comparison between the obtained NiSi and excess oxygen-contaminated Ni/Si films has been performed by EDX analysis of oxygen atomic content in both the films. Focused ion beam milling technology is employed to make the cross-sections of the samples for characterizing the NiSi film thickness and NiSi/Si interface roughness. The influences of nickel film thickness on the NiSi-film morphology and on the NiSi/Si interface roughness are studied.展开更多
ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered co...ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.展开更多
The catalytic effectsof Ln3+ on synthesis of polyethyleneterephthalate and its copolyesterswere studied. The direct esterification reaction of terephthalate acidwith ethylene glycol can be accelerated hy addition of L...The catalytic effectsof Ln3+ on synthesis of polyethyleneterephthalate and its copolyesterswere studied. The direct esterification reaction of terephthalate acidwith ethylene glycol can be accelerated hy addition of Ln3+, and theLn3+, compound can be acted aspromoter of Sb2O3 in the stage ofpolycondensation. The mechanismof esterification and polycondensation by addition of Ln3+ was discussed. The thermal-stabilities ofpolyethylene terephthalate and itscopolyesters obtained by addihon ofLn3+ were also investigaed.展开更多
As perovskite solar cells show tremendous potential for widespread applications, we find that adding inorganic thermal-stable cesium ions into MAPbI_3 results in significantly improves thermal stability. For un-encaps...As perovskite solar cells show tremendous potential for widespread applications, we find that adding inorganic thermal-stable cesium ions into MAPbI_3 results in significantly improves thermal stability. For un-encapsulated perovskite devices, the energy conversion efficiency maintains about 75% of its original value（over 15%） in the MA_（0.85）Cs_（0.05）PbI_3 device under 80 min of heating at 140°C in a dry atmosphere（RH ≤ 30%）. With significantly improved thermal stability achieved by a convenient process, it is expected that this type of mixed-cation perovskites can further facilitate large scale applications.展开更多
基金financially supported by National Natural Science Foundation of China (21908085)Natural Science Foundation of Jiangsu Province, China (BK20190961)+2 种基金Postdoctoral Research Foundation of Jiangsu Province (2020Z291)Foundation from Marine Equipment and Technology Institute for Jiangsu University of Science and Technology, China (HZ20190004)High-tech Ship Research Project of the Ministry of Industry and Information Technology, China (No. [2017] 614)
文摘High applied thermal-stability and superior structural property for activated carbon adsorbent are extremely promising,which also is the determining short slab in volatile organic compounds(VOCs)adsorption applications.Herein,we develop the outstanding engineering carbon adsorbents from waste shaddock peel which affords greatly-enhanced thermal-stability and super structural property(S_(Lang)=4962.6 m2·g^(-1),Vmicro=1.67 cm^(3)·g^(-1)).Such character endows the obtained adsorbent with ultrahigh adsorption capture performance of VOCs specific to benzene(16.58 mmol·g^(-1))and toluene(15.50 mmol·g^(-1),far beyond traditional zeolite and activated carbon even MOFs materials.The structural expression characters were accurately correlated with excellent adsorption efficiency of VOCs by studying synthetic factor-controlling comparative samples.Ulteriorly,adsorption selectivity prediction at different relative humidity was demonstrated through DIH(difference of the isosteric heats),exceedingly highlighting great superiority(nearly sixfold)in selective adsorption of toluene compared to volatile benzene.Our findings provide the possibility for practical industrial application and fabrication of waste biomass-derived outstanding biochar adsorbent in the environmental treatment of threatening VOCs pollutants.
基金Supported by National High Technology Research and Development ProgramofChina(863Program)(No.2003AA305920)
文摘We put forward a large-area and cost-effective method to fabricate superhydrophobic coating by introducing in-situ functionalized nano-SiO2 into side-amino modified hydroxy-terminated polydimethylsiloxane （SA-HTPDMS） curing system. With the characterization using water contact angle （WCA） tester, Fourier transform infrared spectroscopy （FTIR）, scanning electron microscope （SEM）, atomic force microscopy （AFM） and simultaneous thermal analysis, the as-prepared coating displayed a tremendous WCA of 154.8±1°, sliding angle （SA） about 3.5° and stable self-cleaning property range from -10 to 80 ℃. It was also found that the synergistic effect of surface micro-nano hierarchical structure and chemical hydrophobicity, stability from matrix had made contributions to the superhydrophobicity and excellent heat resistance up to 300 ℃.
基金supported by the National Natural Science Foundation of China(Nots.41801046,42161026)the Natural Science Foundation of Qinghai Province(No.2021-ZJ-716)the Transportation Science and Technology Project of Qinghai Province(No.2019-06&No.2018-02).
文摘The research shows that the selection of pavement type is very important for the thermal stability of high-grade highway embankment in permafrost regions because of the different solar absorption rates between asphalt concrete and asphalt concrete pavement.In this paper,the common embankment of high-grade highway in permafrost regions is selected as the research object to study the influence of asphalt concrete and cement concrete pavement on the embankment temperature,freeze-thaw cycle process and the change law of the permafrost table,which provides a basis for the use of reasonable pavement materials in permafrost regions.
基金This work was supported by the NationalNatural Science Foundation of China(No.29774018).
文摘A new series of (E)-5-[2-(N-hexylcarbazolyl)vinyl]furan chromophores with various accepters have been synthesized by the Knoevenagel condensation of (E)-5-[2-(N- hexylcarbazolyl) vinyl]-2-furaldehydes with malononitrile, 1,3-diethyl-2-thiobarbituric acid, or 3-phenyl-5-isoxazol one, respectively. They are characterized by H-1-NMR, FT- IR, UV-VIS, MS and elemental analysis, and have shown strong solvatochromism and high thermal stability.
基金Project supported by the National Natural Science Foundation of China (Grant No 50477012)the Foundation of Excellent Doctoral Dissertation of Xi’an University of Technology and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No 20050700006)
文摘This paper analyses the reverse recovery characteristics and mechanism of SiGeC p-i-n diodes. Based on the integrated systems engineering （ISE） data, the critical physical models of SiGeC diodes are proposed. Based on heterojunction band gap engineering, the softness factor increases over six times, reverse recovery time is over 30% short and there is a 20% decrease in peak reverse recovery current for SiGeC diodes with 20% of germanium and 0.5% of carbon, compared to Si diodes. Those advantages of SiGeC p-i-n diodes are more obvious at high temperature. Compared to lifetime control, SiCeC technique is more suitable for improving diode properties and the tradeoff between reverse recovery time and forward voltage drop can be easily achieved in SiGeC diodes. Furthermore, the high thermal-stability of SiGeC diodes reduces the costs of further process steps and offers more freedoms to device design.
基金Supported by the National Natural Science Foundation of China under Grant Nos 50472073 and 90406024-1, and the National Center for Nanoscience and Technology of China.
文摘By repeatedly pre-cleaning the sputtering chamber with Ar gas and in-situ isochronal annealing samples, NiSi films are successfully prepared on Si （100） substrates in a radio-frequency magnetron sputtering system. A comparison between the obtained NiSi and excess oxygen-contaminated Ni/Si films has been performed by EDX analysis of oxygen atomic content in both the films. Focused ion beam milling technology is employed to make the cross-sections of the samples for characterizing the NiSi film thickness and NiSi/Si interface roughness. The influences of nickel film thickness on the NiSi-film morphology and on the NiSi/Si interface roughness are studied.
基金Supported by the National Natural Science Foundation of China under Grant No 50472026, and the Applied Basic Key Project of Tianjin （043801011）.
文摘ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.
文摘The catalytic effectsof Ln3+ on synthesis of polyethyleneterephthalate and its copolyesterswere studied. The direct esterification reaction of terephthalate acidwith ethylene glycol can be accelerated hy addition of Ln3+, and theLn3+, compound can be acted aspromoter of Sb2O3 in the stage ofpolycondensation. The mechanismof esterification and polycondensation by addition of Ln3+ was discussed. The thermal-stabilities ofpolyethylene terephthalate and itscopolyesters obtained by addihon ofLn3+ were also investigaed.
基金jointly supported by the State Key Program for Basic Research of China(No.2015CB659300)the National Natural Science Foundation of China(Nos.11621091 and 11574143)+2 种基金the Natural Science Foundation of Jiangsu Province(Nos.BK20150056)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Fundamental Research Funds for the Central Universities
文摘As perovskite solar cells show tremendous potential for widespread applications, we find that adding inorganic thermal-stable cesium ions into MAPbI_3 results in significantly improves thermal stability. For un-encapsulated perovskite devices, the energy conversion efficiency maintains about 75% of its original value（over 15%） in the MA_（0.85）Cs_（0.05）PbI_3 device under 80 min of heating at 140°C in a dry atmosphere（RH ≤ 30%）. With significantly improved thermal stability achieved by a convenient process, it is expected that this type of mixed-cation perovskites can further facilitate large scale applications.
