Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most o...Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most of which are based on the global rock bolt response evaluated in pull-out tests.This paper presents a laboratory experimental setup aiming to capture the rock formation effect,while using distributed fiber optic sensing to quantify the effect of the confinement and the reinforcement pull-out behavior on a more local level.It is shown that the behavior along the sample itself varies,with certain points exhibiting stress drops with crack formation.Some edge effects related to the kinematic freedom of the grout to dilate are also observed.Regardless,it was found that the mid-level response is quite similar to the average response along the sample.The ability to characterize the variation of the response along the sample is one of the many advantages high-resolution fiber optic sensing allows in such investigations.The paper also offers a plasticity-based hardening load transfer function,representing a"slice"of the anchor.The paper describes in detail the development of the model and the calibration/determination of its parameters.The suggested model captures well the coupled behavior in which the pull-out process leads to an increase in the confining stress due to dilative behavior.展开更多
Resonance effects in parallel jointed rocks subject to stress waves are investigated using transfer functions,derived from signals generated through numerical modelling.Resonance is important for a range of engineerin...Resonance effects in parallel jointed rocks subject to stress waves are investigated using transfer functions,derived from signals generated through numerical modelling.Resonance is important for a range of engineering situations as it identifies the frequency of waves which will be favourably transmitted.Two different numerical methods are used for this study,adopting the finite difference method and the combined discrete element-finite difference method.The numerical models are validated by replicating results from previous studies.The two methods are found to behave similarly and show the same resonance effects;one operating at low frequency and the other operating at relatively high frequency.These resonance effects are interpreted in terms of simple physical systems and analytical equations are derived to predict the resonant frequencies of complex rock masses.Low frequency resonance is shown to be generated by a system synonymous with masses between springs,described as spring resonance,with an equal number of resonant frequencies as the number of blocks.High frequency resonance is generated through superposition of multiple reflected waves developing standing waves within intact blocks,described as superposition resonance.While resonance through superposition has previously been identified,resonance based on masses between springs has not been previously identified in jointed rocks.The findings of this study have implications for future analysis of multiple jointed rock masses,showing that a wave travelling through such materials can induce other modes of propagation of waves,i.e.spring resonance.展开更多
Soil temperature regime(STR)is important for soil classification and land use.Generally,STR is delineated by estimating the mean annual soil temperature at a depth of 50 cm(MAST50)according to the Chinese Soil Taxonom...Soil temperature regime(STR)is important for soil classification and land use.Generally,STR is delineated by estimating the mean annual soil temperature at a depth of 50 cm(MAST50)according to the Chinese Soil Taxonomy(CST).However,delineating the STR of China remains a challenge due to the difficulties in accurately estimating MAST50.The objectives of this study were to explore environmental factors that influence the spatial variation of MAST50 and generate an STR map for China.Soil temperature measurements at 40 and 80 cm depth were collected from 386 National Meteorological Stations in China during 1971–2000.The MAST50 was calculated as the average mean annual soil temperature(MAST)from 1971–2000 between 40 and 80 cm depths.In addition,2048 mean annual air temperature(MAAT)measurements from 1971 to 2000 were collected from the National Meteorological Stations across China.A zonal pedotransfer function(PTF)was developed based on the ensemble linear regression kriging model to predict the MAST50 in three topographic steps of China.The results showed that MAAT was the most important variable related to the variation of MAST50.The zonal PTF was evaluated with a 10%validation dataset with a mean absolute error(MAE)of 0.66°C and root mean square error(RMSE)of 0.78°C,which were smaller than the unified model with MAE of 0.83°C and RMSE of 0.96°C,respectively.This study demonstrated that the zonal PTF helped improve the accuracy of the predicted MAST50 map.Based on the prediction results,an STR map across China was generated to provide a consistent scientific base for the improvement and application of CST and land use support.展开更多
To understand the relationship between planktonic diatoms and environmental variables in the lakes on the Songnen Plain,northeast(NE)China,we investigated water quality and planktonic diatoms from 71 sampling points i...To understand the relationship between planktonic diatoms and environmental variables in the lakes on the Songnen Plain,northeast(NE)China,we investigated water quality and planktonic diatoms from 71 sampling points in 27 lakes,based on which Canonical Correspondence Analysis(CCA)was conducted.The result show that planktonic diatoms displayed certain responses to environment gradients,and the total phosphorus(TP)explained the maximum variation of planktonic diatom species among the 15 environmental variables,suggesting that TP was the most important and significant environmental parameter affecting the distribution of diatom species.In addition,we established a diatom-total phosphorus transfer(DTPT)function,of which component 5 of the weighted averaging partial least squares regression(WAPLS)was chosen to and compared with a series of weighted average regression(WA)models and WA-PLS models.According to the jackknifing statistical test,the component 5 of WA-PLS models provided a lower root-mean-square error prediction(RMSEP=0.202)and a higher correlation coefficient between observation and prediction(R^2_Jack=0.759).After deletion of three outliers,the root-mean-square error prediction of the DTPT function was reduced(RMSEP=0.169)while the correlation coefficient between observation and prediction was increased(R^2_Jack=0.823).Therefore,this DTPT function performed better than other regional TP models in the world.However,it remains demanding for expanding the background dataset to improve the prediction ability of the model.展开更多
The galvanic coupling intra-body communication (IBC) was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameters ...The galvanic coupling intra-body communication (IBC) was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameters were discussed. Secondly, the transfer function of the galvanic coupling IBC was derived and proposed. Finally, the signal attenuation characteristics of the galvanic coupling IBC were measured along different signal transmission paths of actual human bodies, while the corresponding mathematical simulations based on the proposed transfer function were carried out. Our investigation showed that the mathematical simulation results coincided with the measured results over the frequency range of 100kHz to 5 MHz, which indicated that the proposed transfer function could be useful for theoretical analysis and application of the galvanic coupling IBC.展开更多
Applying 3-dimension finite difference method, the distribution characteristics of horizontal field transfer func-tions for rectangular conductor have been computed, and the law of distribution for Re-part and Im-part...Applying 3-dimension finite difference method, the distribution characteristics of horizontal field transfer func-tions for rectangular conductor have been computed, and the law of distribution for Re-part and Im-part has been given. The influences of source field period, the conductivity, the buried depth and the length of the conductor on the transfer functions were studied. The extrema of transfer functions appear at the center, the four corners and around the edges of conductor, and move with the edges. This feature demonstrates that around the edges are best places for transfer functions observation.展开更多
Accurately measuring precipitation is integral for understanding water cycle processes and assessing climate change in the Qinghai–Tibet Plateau(QTP).The Geonor T-200B weighing precipitation gauge with a single Alter...Accurately measuring precipitation is integral for understanding water cycle processes and assessing climate change in the Qinghai–Tibet Plateau(QTP).The Geonor T-200B weighing precipitation gauge with a single Alter shield(Geonor)and the Chinese standard precipitation gauge(CSPG)are widely used for measuring precipitation in the QTP.However,their measurements need to be adjusted for wetting loss,evaporation loss and windinduced undercatch.Four existing transfer functions for adjusting the Geonor-recorded and three transfer functions for adjusting the CSPG-recorded precipitation at hourly,daily or event scale has been proposed based on the precipitation intercomparison experiments conducted at a single site in different regions.Two latest transfer functions for the Geonor(which are referred to as K2017a and K2017b)at the half-hour time scale based on the precipitation intercomparison experiments at multiple stations in the northern hemisphere were provided in the World Meteorological Organization Solid Precipitation Intercomparison Experiment.However,the applicability of these transfer functions in the QTP has not been evaluated.Therefore,the current study carried out a precipitation measurement intercomparison experiment between August 2018 and September 2020 at a site in Beiluhe in central QTP.The performance of these transfer functions at this site was also evaluated on the basis of mean bias(MB),root mean squared error(RMSE)and relative total catch(RTC).The results are as follows:First,the unadjusted RTC values of the Geonor for rain,mixed(snow mixed with rain),snow and hail are 92.06%,85.35%,64.11% and 91.82%,respectively,and the unadjusted RTC values of the CSPG for the same precipitation types are 92.59%,81.32%,46.43% and 95.56%,respectively.Second,K2017a has the most accurate adjustment results for the Geonor-recorded snow and mixed precipitation at the half-hour time scale,and the post-adjustment RTC values increased to 98.25% and 98.23%,respectively.M2007e,an event-based transfer function,was found to have the most accurate adjustment results for the Geonorrecorded snow precipitation at the event scale,and the post-adjustment RTC value increased to 96.36%.Third,the existing transfer functions for CSPG underestimate snowfall,while overestimating rainfall.Fourth,hail is a significant precipitation type in central QTP.The catch efficiency of hail precipitation and the temperature when hail precipitation occurs are close to those of rain;moreover,the transfer functions for rain are suitable for hail as well.展开更多
The key difficulty of restoring a fuzzy image is to estimate its point spread function( PSF). In the paper,PSF is modelled based on modulation transfer function( MTF). The first step is calculating the image MTF. In t...The key difficulty of restoring a fuzzy image is to estimate its point spread function( PSF). In the paper,PSF is modelled based on modulation transfer function( MTF). The first step is calculating the image MTF. In the traditional slanted-edge method,a sub-block is always manually extracted from original image and its MTF will be viewed as the result of the whole image. However,handcraft extraction is inefficient and will lead to inaccurate results. Given this,an automatic MTF computation algorithm is proposed,which extracts and screens out all the effective sub-blocks and calculates their average MTF as the final result. Then,a two-dimensional MTF restoration model is constructed by multiplying the horizontal and vertical MTF,and it is combined with conventional image restoration methods to restore fuzzy image. Experimental results indicate the proposed method implementes a fast and accurate MTF computation and the MTF model improves the performance of conventional restoration methods significantly.展开更多
To help comfort for an amputee, it is important to understand the load distribution between the residual limb and the prosthetic socket for a prosthetic socket system. An interfacial stress sensor was presented which ...To help comfort for an amputee, it is important to understand the load distribution between the residual limb and the prosthetic socket for a prosthetic socket system. An interfacial stress sensor was presented which was capable of measuring compressive pressure and shear stress simultaneously. A mathematical model was built and an experiment was conducted to obtain the transfer function of interfacial stress sensor to compressive pressure. The results show that the sensor is capable of measuring a range of 30-217 kPa compressive pressure with a relative error of 32.15% in lower range and 6.22% in upper range.展开更多
To accelerate head-related transfer functions(HRTFs)measurement,two or more independent sound sources are usually employed in the measurement system.However,the multiple scattering between adjacent sound sources may i...To accelerate head-related transfer functions(HRTFs)measurement,two or more independent sound sources are usually employed in the measurement system.However,the multiple scattering between adjacent sound sources may influence the accuracy of measurement.On the other hand,the directivity of sound source could induce measurement error.Therefore,a model consisting of two spherical sound sources with approximate omni-directivity and a rigid-spherical head is proposed to evaluate the errors in HRTF measurement caused by multiple scattering between sources.An example of analysis using multipole re-expansion indicates that the error of ipsilateral HRTFs are within the bound of±1.0 dB below a frequency of 20 kHz,provided that the sound source radius does not exceed 0.025 m,the source distance relative to head center is not less than 0.5 m,and the angular interval between two adjacent sources is not less than 20 degrees.Similar conclusions under different conditions can also be analyzed and discussed by using this calculation method.Furthermore,the results are verified by measurements of HRTFs for a rigid sphere and a KEMAR artificial head.展开更多
The geomagnetic vertical transfer functions(VTFs)are useful to constrain the conductivity structure in the deep Earth.In this study,we propose an approach of estimating the geomagnetic VTFs in the wide:period range fr...The geomagnetic vertical transfer functions(VTFs)are useful to constrain the conductivity structure in the deep Earth.In this study,we propose an approach of estimating the geomagnetic VTFs in the wide:period range from the multi-interval geomagnetic data.Applying the above method to the different interval(such as one-second,one-minute,one-hour)data from some geomagnetic observatories in China,we obtain the corresponding VTFs in the wide period range from 64 s to 9,830,400 s.In order to evaluate the possible ocean effect on different observatories,we make close investigations of the real geomagnetic induction vectors at QZH,SYG and XIC observatories.The results indicate that the ocean effect is clear at the coastal observatory like QZH.However,the ocean effect tends to decrease for the inland observatories(such as SYG and XIC)with the increasing distance from the coast.展开更多
AIM: To describe the characteristics of modulation transfer function (MTF) of anterior corneal surface, and obtain the the normal reference range of MTF at different spatial frequencies and optical zones of the anteri...AIM: To describe the characteristics of modulation transfer function (MTF) of anterior corneal surface, and obtain the the normal reference range of MTF at different spatial frequencies and optical zones of the anterior corneal surface in myopes. · METHODS: Four hundred eyes from 200 patients were examined under SIRIUS corneal topography system. Phoenis analysis software was applied to simulate the MTF curves of anterior corneal surface at vertical and horizontal meridians at the 3, 4, 5 , 6, 7mm optical zones of cornea .The MTF values at spatial frequencies of 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 and 60 cycles/degree (c/d) were selected. · RESULTS: The MTF curve of anterior corneal surface decreased rapidly from low to intermediate frequency (0-15cpd) at various optical zones of cornea, the value decreased to 0 slowly at higher frequency (>15cpd). With the increase of the optical zones of cornea, MTF curve decreased gradually. 3) In the range of 3 mm- 6 mm optical zones of the cornea, the MTF values measured at horizontal meridian were greater than the corresponding values at horizontal meridian of each spatial frequency, the difference was statistically significant (P <0.05). At 7 mm optical zones of cornea, the MTF values measured at horizontal meridian were less than the corresponding values at vertical meridian at 10-60 spatial frequencies(cpd), and the difference was statistically significant in 25, 30, 35, 40, 45, 50 cpd(P <0.05). · CONCLUSION: MTF can be used to describe the imaging quality of optical systems at anterior corneal surface objectively in detail.展开更多
Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous co...Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode(CCM) operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.展开更多
A digital transfer function measurement system has been embedded in the low-level radio frequency (LLRF) system of the storage ring of the Shanghai Synchrotron Radiation Facility. The measurement results indicate that...A digital transfer function measurement system has been embedded in the low-level radio frequency (LLRF) system of the storage ring of the Shanghai Synchrotron Radiation Facility. The measurement results indicate that the decreased control accuracy at high current is primarily owing to ripples from the high-voltage power supply, the transient beam loading effect, and the digital aliasing effect. The current LLRF algorithm is not able to suppress these disturbances.展开更多
The fluctuation of most of the hydrograph in the deep aqueous system records the fluid pulsation in lithosphere and variation of the earth’s crust. Many observations have verified that groundwater is an ideal informa...The fluctuation of most of the hydrograph in the deep aqueous system records the fluid pulsation in lithosphere and variation of the earth’s crust. Many observations have verified that groundwater is an ideal information carrier of the crust. In this paper, the series of input (precipitation, air pressure, Earth tide etc.) and output (water level, artesian flow) of the deep aqueous system are studied by using the spectrum analysis and system theory. The application concepts of transfer function and the spectral structure of the hydrograph enrich the knowledge of the deep aqueous system. Two typical spectral structures of the hydrograph of the deep aqueous system are obtained by comparing with many water-bearing systems of the Jizhong depression. One is from well Ma-17 and the other is from the well Xinze-5. Finally, the physical models of forming the spectrum of the hydrograph are constructed on the basis of the spectrum research on the deep aqueous system.展开更多
The resolution characteristic can be obtained by the modulation transfer function (MTF) of a GaAs/GaAlAs photocathode.After establishing the theoretical model of GaAs(100)-oriented atomic configuration and the formula...The resolution characteristic can be obtained by the modulation transfer function (MTF) of a GaAs/GaAlAs photocathode.After establishing the theoretical model of GaAs(100)-oriented atomic configuration and the formula for the ionized impurity scattering of the non-equilibrium carriers,this paper calculates the trajectories of photoelectrons in a photocathode.Thus the distribution of photoelectron spots on the emit-face is obtained,which is namely the point spread function.The MTF is obtained by Fourier transfer of the line spread function obtained from the point spread function.The MTF obtained from these calculations is shown to depend heavily on the electron diffusion length,and enhanced considerably by decreasing the electron diffusion length and increasing the doping concentration.Furthermore,the resolution is enhanced considerably by increasing the active-layer thickness,especially at high spatial frequencies.The best spatial resolution is 860 lp/mm,for the GaAs photocathode of doping concentration 1 × 10 19 cm 3,electron diffusion length 3.6 μm and the active-layer thickness 2 μm,under the 633-nm light irradiated.This research will contribute to the future improvement of the cathode's resolution for preparing a high performance GaAs photocathode,and improve the resolution of a low light level image intensifier.展开更多
A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy ...A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides,PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.展开更多
A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulati...A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulation structure. How to use the general thermal response factors and z-transfer function coefficients toca1culate the indoor air temperature variation directly is also studied. It is shown through practical use that it iseasy to program with the methods presented in this paper and the calculated results are reliable.展开更多
Power transformer insulation systems are subjected to many stresses during normal operation due to lightning and switching.If the spectrum of incoming surge voltage matches the winding one,the corresponding resonance ...Power transformer insulation systems are subjected to many stresses during normal operation due to lightning and switching.If the spectrum of incoming surge voltage matches the winding one,the corresponding resonance will be excited.Therefore external transients occurring in power systems might trigger internal overvoltages with large maximum value in transformer windings.Overvoltages having such characteristic have been the root cause of many power transformer failures.The paper presents an approach to the identification of sensitive zones in the transformer windings based on the measurements of overvoltages inside windings and frequency dependences of admittance of the power transformer.The frequency characteristic of the transformer winding may determine those regions in the frequency spectrum.The presented approach might be used both for design optimization and diagnostics of distribution and power transformers.展开更多
A new interpolation algorithm for Head-Related Transfer Function (HRTF) is proposed to realize 3D sound reproduction via headphones in arbitrary spatial direction. HRTFs are modeled as a weighted sum of spherical harm...A new interpolation algorithm for Head-Related Transfer Function (HRTF) is proposed to realize 3D sound reproduction via headphones in arbitrary spatial direction. HRTFs are modeled as a weighted sum of spherical harmonics on a spherical surface. Truncated Singular Value Decomposition (SVD) is adopted to calculate the weights of the model. The truncation number is chosen according to Frobenius norm ratio and the partial condition number. Compared with other interpolated methods, our proposed approach not only is continuous but exploits global information of available directions. The HRTF from any desired direction can be obtained more accurately and robustly. Reconstructed and interpolated results demonstrate that our proposed algorithm acquired better performance.展开更多
基金funding support from the Israeli Ministry of Housing and Construction(Grant No.2028286).
文摘Confinement of rock bolts by the surrounding rock formation has long been recognized as a positive contributor to the pull-out behavior,yet only a few experimental works and analytical models have been reported,most of which are based on the global rock bolt response evaluated in pull-out tests.This paper presents a laboratory experimental setup aiming to capture the rock formation effect,while using distributed fiber optic sensing to quantify the effect of the confinement and the reinforcement pull-out behavior on a more local level.It is shown that the behavior along the sample itself varies,with certain points exhibiting stress drops with crack formation.Some edge effects related to the kinematic freedom of the grout to dilate are also observed.Regardless,it was found that the mid-level response is quite similar to the average response along the sample.The ability to characterize the variation of the response along the sample is one of the many advantages high-resolution fiber optic sensing allows in such investigations.The paper also offers a plasticity-based hardening load transfer function,representing a"slice"of the anchor.The paper describes in detail the development of the model and the calibration/determination of its parameters.The suggested model captures well the coupled behavior in which the pull-out process leads to an increase in the confining stress due to dilative behavior.
基金supported by the Engineering and Physical Sciences Research Council(EPSRC)(EP/R513258/1).
文摘Resonance effects in parallel jointed rocks subject to stress waves are investigated using transfer functions,derived from signals generated through numerical modelling.Resonance is important for a range of engineering situations as it identifies the frequency of waves which will be favourably transmitted.Two different numerical methods are used for this study,adopting the finite difference method and the combined discrete element-finite difference method.The numerical models are validated by replicating results from previous studies.The two methods are found to behave similarly and show the same resonance effects;one operating at low frequency and the other operating at relatively high frequency.These resonance effects are interpreted in terms of simple physical systems and analytical equations are derived to predict the resonant frequencies of complex rock masses.Low frequency resonance is shown to be generated by a system synonymous with masses between springs,described as spring resonance,with an equal number of resonant frequencies as the number of blocks.High frequency resonance is generated through superposition of multiple reflected waves developing standing waves within intact blocks,described as superposition resonance.While resonance through superposition has previously been identified,resonance based on masses between springs has not been previously identified in jointed rocks.The findings of this study have implications for future analysis of multiple jointed rock masses,showing that a wave travelling through such materials can induce other modes of propagation of waves,i.e.spring resonance.
基金funded by the National Key Basic Research Special Foundation of China(2021FY100405)the National Natural Science Foundation of China(U20A20114,42201069 and 42077002)the Fundamental Research Funds for Central Non-profit Scientific Institution,China(1610132018012).
文摘Soil temperature regime(STR)is important for soil classification and land use.Generally,STR is delineated by estimating the mean annual soil temperature at a depth of 50 cm(MAST50)according to the Chinese Soil Taxonomy(CST).However,delineating the STR of China remains a challenge due to the difficulties in accurately estimating MAST50.The objectives of this study were to explore environmental factors that influence the spatial variation of MAST50 and generate an STR map for China.Soil temperature measurements at 40 and 80 cm depth were collected from 386 National Meteorological Stations in China during 1971–2000.The MAST50 was calculated as the average mean annual soil temperature(MAST)from 1971–2000 between 40 and 80 cm depths.In addition,2048 mean annual air temperature(MAAT)measurements from 1971 to 2000 were collected from the National Meteorological Stations across China.A zonal pedotransfer function(PTF)was developed based on the ensemble linear regression kriging model to predict the MAST50 in three topographic steps of China.The results showed that MAAT was the most important variable related to the variation of MAST50.The zonal PTF was evaluated with a 10%validation dataset with a mean absolute error(MAE)of 0.66°C and root mean square error(RMSE)of 0.78°C,which were smaller than the unified model with MAE of 0.83°C and RMSE of 0.96°C,respectively.This study demonstrated that the zonal PTF helped improve the accuracy of the predicted MAST50 map.Based on the prediction results,an STR map across China was generated to provide a consistent scientific base for the improvement and application of CST and land use support.
基金Supported by the National Natural Science Foundation of China(Nos.41571199,41030743,31870187)。
文摘To understand the relationship between planktonic diatoms and environmental variables in the lakes on the Songnen Plain,northeast(NE)China,we investigated water quality and planktonic diatoms from 71 sampling points in 27 lakes,based on which Canonical Correspondence Analysis(CCA)was conducted.The result show that planktonic diatoms displayed certain responses to environment gradients,and the total phosphorus(TP)explained the maximum variation of planktonic diatom species among the 15 environmental variables,suggesting that TP was the most important and significant environmental parameter affecting the distribution of diatom species.In addition,we established a diatom-total phosphorus transfer(DTPT)function,of which component 5 of the weighted averaging partial least squares regression(WAPLS)was chosen to and compared with a series of weighted average regression(WA)models and WA-PLS models.According to the jackknifing statistical test,the component 5 of WA-PLS models provided a lower root-mean-square error prediction(RMSEP=0.202)and a higher correlation coefficient between observation and prediction(R^2_Jack=0.759).After deletion of three outliers,the root-mean-square error prediction of the DTPT function was reduced(RMSEP=0.169)while the correlation coefficient between observation and prediction was increased(R^2_Jack=0.823).Therefore,this DTPT function performed better than other regional TP models in the world.However,it remains demanding for expanding the background dataset to improve the prediction ability of the model.
基金Supported by the National Natural Science Foundation of China(60801050)the Basic Research Foundation of Beijing Institute of Technology(1010050320804)
文摘The galvanic coupling intra-body communication (IBC) was mathematically simulated based on the proposed transfer function. Firstly, a galvanic coupling IBC circuit model was developed and the corresponding parameters were discussed. Secondly, the transfer function of the galvanic coupling IBC was derived and proposed. Finally, the signal attenuation characteristics of the galvanic coupling IBC were measured along different signal transmission paths of actual human bodies, while the corresponding mathematical simulations based on the proposed transfer function were carried out. Our investigation showed that the mathematical simulation results coincided with the measured results over the frequency range of 100kHz to 5 MHz, which indicated that the proposed transfer function could be useful for theoretical analysis and application of the galvanic coupling IBC.
文摘Applying 3-dimension finite difference method, the distribution characteristics of horizontal field transfer func-tions for rectangular conductor have been computed, and the law of distribution for Re-part and Im-part has been given. The influences of source field period, the conductivity, the buried depth and the length of the conductor on the transfer functions were studied. The extrema of transfer functions appear at the center, the four corners and around the edges of conductor, and move with the edges. This feature demonstrates that around the edges are best places for transfer functions observation.
基金supported primarily by the National Natural Sciences Foundation of China(42171467,42001060 and 41705139)Natural Science Foundation of Qinghai Province(2021-ZJ947Q)。
文摘Accurately measuring precipitation is integral for understanding water cycle processes and assessing climate change in the Qinghai–Tibet Plateau(QTP).The Geonor T-200B weighing precipitation gauge with a single Alter shield(Geonor)and the Chinese standard precipitation gauge(CSPG)are widely used for measuring precipitation in the QTP.However,their measurements need to be adjusted for wetting loss,evaporation loss and windinduced undercatch.Four existing transfer functions for adjusting the Geonor-recorded and three transfer functions for adjusting the CSPG-recorded precipitation at hourly,daily or event scale has been proposed based on the precipitation intercomparison experiments conducted at a single site in different regions.Two latest transfer functions for the Geonor(which are referred to as K2017a and K2017b)at the half-hour time scale based on the precipitation intercomparison experiments at multiple stations in the northern hemisphere were provided in the World Meteorological Organization Solid Precipitation Intercomparison Experiment.However,the applicability of these transfer functions in the QTP has not been evaluated.Therefore,the current study carried out a precipitation measurement intercomparison experiment between August 2018 and September 2020 at a site in Beiluhe in central QTP.The performance of these transfer functions at this site was also evaluated on the basis of mean bias(MB),root mean squared error(RMSE)and relative total catch(RTC).The results are as follows:First,the unadjusted RTC values of the Geonor for rain,mixed(snow mixed with rain),snow and hail are 92.06%,85.35%,64.11% and 91.82%,respectively,and the unadjusted RTC values of the CSPG for the same precipitation types are 92.59%,81.32%,46.43% and 95.56%,respectively.Second,K2017a has the most accurate adjustment results for the Geonor-recorded snow and mixed precipitation at the half-hour time scale,and the post-adjustment RTC values increased to 98.25% and 98.23%,respectively.M2007e,an event-based transfer function,was found to have the most accurate adjustment results for the Geonorrecorded snow precipitation at the event scale,and the post-adjustment RTC value increased to 96.36%.Third,the existing transfer functions for CSPG underestimate snowfall,while overestimating rainfall.Fourth,hail is a significant precipitation type in central QTP.The catch efficiency of hail precipitation and the temperature when hail precipitation occurs are close to those of rain;moreover,the transfer functions for rain are suitable for hail as well.
基金Supported by the National High Technology Research and Development Programme of China(No.2012AA12A305)the National Key Technology R&D Program of the Ministry of Science and Technology(No.2013BAH03B01)+1 种基金Fundamental Research Funds for the Central Universities of China(No.2042015kf0059)China Postdoctoral Science Foundation(No.2015M582277)
文摘The key difficulty of restoring a fuzzy image is to estimate its point spread function( PSF). In the paper,PSF is modelled based on modulation transfer function( MTF). The first step is calculating the image MTF. In the traditional slanted-edge method,a sub-block is always manually extracted from original image and its MTF will be viewed as the result of the whole image. However,handcraft extraction is inefficient and will lead to inaccurate results. Given this,an automatic MTF computation algorithm is proposed,which extracts and screens out all the effective sub-blocks and calculates their average MTF as the final result. Then,a two-dimensional MTF restoration model is constructed by multiplying the horizontal and vertical MTF,and it is combined with conventional image restoration methods to restore fuzzy image. Experimental results indicate the proposed method implementes a fast and accurate MTF computation and the MTF model improves the performance of conventional restoration methods significantly.
基金National Natural Science Foundations of China(No.60976058,No.61274078)Innovation Program of Shanghai Municipal Education Commission,China(No.13ZZ049)Fundamental Research Funds for the Central Universities of Xidian University,China(No.K5051304005)
文摘To help comfort for an amputee, it is important to understand the load distribution between the residual limb and the prosthetic socket for a prosthetic socket system. An interfacial stress sensor was presented which was capable of measuring compressive pressure and shear stress simultaneously. A mathematical model was built and an experiment was conducted to obtain the transfer function of interfacial stress sensor to compressive pressure. The results show that the sensor is capable of measuring a range of 30-217 kPa compressive pressure with a relative error of 32.15% in lower range and 6.22% in upper range.
基金funded by National Natural Science Foundation of China(No.11574090)Natural Science Foundation of Guangdong Province(No.2018B030311025).
文摘To accelerate head-related transfer functions(HRTFs)measurement,two or more independent sound sources are usually employed in the measurement system.However,the multiple scattering between adjacent sound sources may influence the accuracy of measurement.On the other hand,the directivity of sound source could induce measurement error.Therefore,a model consisting of two spherical sound sources with approximate omni-directivity and a rigid-spherical head is proposed to evaluate the errors in HRTF measurement caused by multiple scattering between sources.An example of analysis using multipole re-expansion indicates that the error of ipsilateral HRTFs are within the bound of±1.0 dB below a frequency of 20 kHz,provided that the sound source radius does not exceed 0.025 m,the source distance relative to head center is not less than 0.5 m,and the angular interval between two adjacent sources is not less than 20 degrees.Similar conclusions under different conditions can also be analyzed and discussed by using this calculation method.Furthermore,the results are verified by measurements of HRTFs for a rigid sphere and a KEMAR artificial head.
基金the National Key Research and Development Program of China(No.2018YFC1503806)the National Natural Science Foundation of China(No.41774085)。
文摘The geomagnetic vertical transfer functions(VTFs)are useful to constrain the conductivity structure in the deep Earth.In this study,we propose an approach of estimating the geomagnetic VTFs in the wide:period range from the multi-interval geomagnetic data.Applying the above method to the different interval(such as one-second,one-minute,one-hour)data from some geomagnetic observatories in China,we obtain the corresponding VTFs in the wide period range from 64 s to 9,830,400 s.In order to evaluate the possible ocean effect on different observatories,we make close investigations of the real geomagnetic induction vectors at QZH,SYG and XIC observatories.The results indicate that the ocean effect is clear at the coastal observatory like QZH.However,the ocean effect tends to decrease for the inland observatories(such as SYG and XIC)with the increasing distance from the coast.
文摘AIM: To describe the characteristics of modulation transfer function (MTF) of anterior corneal surface, and obtain the the normal reference range of MTF at different spatial frequencies and optical zones of the anterior corneal surface in myopes. · METHODS: Four hundred eyes from 200 patients were examined under SIRIUS corneal topography system. Phoenis analysis software was applied to simulate the MTF curves of anterior corneal surface at vertical and horizontal meridians at the 3, 4, 5 , 6, 7mm optical zones of cornea .The MTF values at spatial frequencies of 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 and 60 cycles/degree (c/d) were selected. · RESULTS: The MTF curve of anterior corneal surface decreased rapidly from low to intermediate frequency (0-15cpd) at various optical zones of cornea, the value decreased to 0 slowly at higher frequency (>15cpd). With the increase of the optical zones of cornea, MTF curve decreased gradually. 3) In the range of 3 mm- 6 mm optical zones of the cornea, the MTF values measured at horizontal meridian were greater than the corresponding values at horizontal meridian of each spatial frequency, the difference was statistically significant (P <0.05). At 7 mm optical zones of cornea, the MTF values measured at horizontal meridian were less than the corresponding values at vertical meridian at 10-60 spatial frequencies(cpd), and the difference was statistically significant in 25, 30, 35, 40, 45, 50 cpd(P <0.05). · CONCLUSION: MTF can be used to describe the imaging quality of optical systems at anterior corneal surface objectively in detail.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51007068)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20100201120028)+2 种基金the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No. 2012JQ7026)the Fundamental Research Funds for the Central Universities of China (Grant No. 2012jdgz09)the State Key Laboratory of Electrical Insulation and Power Equipment of China (Grant No. EIPE12303)
文摘Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode(CCM) operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.
文摘A digital transfer function measurement system has been embedded in the low-level radio frequency (LLRF) system of the storage ring of the Shanghai Synchrotron Radiation Facility. The measurement results indicate that the decreased control accuracy at high current is primarily owing to ripples from the high-voltage power supply, the transient beam loading effect, and the digital aliasing effect. The current LLRF algorithm is not able to suppress these disturbances.
基金Project was support by National Natural Science Foundation of China.
文摘The fluctuation of most of the hydrograph in the deep aqueous system records the fluid pulsation in lithosphere and variation of the earth’s crust. Many observations have verified that groundwater is an ideal information carrier of the crust. In this paper, the series of input (precipitation, air pressure, Earth tide etc.) and output (water level, artesian flow) of the deep aqueous system are studied by using the spectrum analysis and system theory. The application concepts of transfer function and the spectral structure of the hydrograph enrich the knowledge of the deep aqueous system. Two typical spectral structures of the hydrograph of the deep aqueous system are obtained by comparing with many water-bearing systems of the Jizhong depression. One is from well Ma-17 and the other is from the well Xinze-5. Finally, the physical models of forming the spectrum of the hydrograph are constructed on the basis of the spectrum research on the deep aqueous system.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60678043)the Research and Innovation Plan for Graduate Students of Jiangsu Higher Education Institutions,China (Grant No. CX09B 096Z)
文摘The resolution characteristic can be obtained by the modulation transfer function (MTF) of a GaAs/GaAlAs photocathode.After establishing the theoretical model of GaAs(100)-oriented atomic configuration and the formula for the ionized impurity scattering of the non-equilibrium carriers,this paper calculates the trajectories of photoelectrons in a photocathode.Thus the distribution of photoelectron spots on the emit-face is obtained,which is namely the point spread function.The MTF is obtained by Fourier transfer of the line spread function obtained from the point spread function.The MTF obtained from these calculations is shown to depend heavily on the electron diffusion length,and enhanced considerably by decreasing the electron diffusion length and increasing the doping concentration.Furthermore,the resolution is enhanced considerably by increasing the active-layer thickness,especially at high spatial frequencies.The best spatial resolution is 860 lp/mm,for the GaAs photocathode of doping concentration 1 × 10 19 cm 3,electron diffusion length 3.6 μm and the active-layer thickness 2 μm,under the 633-nm light irradiated.This research will contribute to the future improvement of the cathode's resolution for preparing a high performance GaAs photocathode,and improve the resolution of a low light level image intensifier.
基金This work was supported by the National Natural Science Foundation of China (No. 50007004)
文摘A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides,PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.
文摘A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulation structure. How to use the general thermal response factors and z-transfer function coefficients toca1culate the indoor air temperature variation directly is also studied. It is shown through practical use that it iseasy to program with the methods presented in this paper and the calculated results are reliable.
文摘Power transformer insulation systems are subjected to many stresses during normal operation due to lightning and switching.If the spectrum of incoming surge voltage matches the winding one,the corresponding resonance will be excited.Therefore external transients occurring in power systems might trigger internal overvoltages with large maximum value in transformer windings.Overvoltages having such characteristic have been the root cause of many power transformer failures.The paper presents an approach to the identification of sensitive zones in the transformer windings based on the measurements of overvoltages inside windings and frequency dependences of admittance of the power transformer.The frequency characteristic of the transformer winding may determine those regions in the frequency spectrum.The presented approach might be used both for design optimization and diagnostics of distribution and power transformers.
基金Supported by Shanghai Natural Science Foundation, Shanghai Leading Academic Discipline Project, and STCSM of China (No. 08ZR1408300, S30108, and 08DZ2231100)
文摘A new interpolation algorithm for Head-Related Transfer Function (HRTF) is proposed to realize 3D sound reproduction via headphones in arbitrary spatial direction. HRTFs are modeled as a weighted sum of spherical harmonics on a spherical surface. Truncated Singular Value Decomposition (SVD) is adopted to calculate the weights of the model. The truncation number is chosen according to Frobenius norm ratio and the partial condition number. Compared with other interpolated methods, our proposed approach not only is continuous but exploits global information of available directions. The HRTF from any desired direction can be obtained more accurately and robustly. Reconstructed and interpolated results demonstrate that our proposed algorithm acquired better performance.