The conditions relating to enhanced adsorption procedure of earth element europium（Eu） onto gel-type weak acid resin（110-H） in aqueous solution were optimized by means of the response surface methodology（RSM）, w...The conditions relating to enhanced adsorption procedure of earth element europium（Eu） onto gel-type weak acid resin（110-H） in aqueous solution were optimized by means of the response surface methodology（RSM）, which proved that 110-H owned satisfactory adsorption capacity（346.85 mg/g） in optimum conditions, belonging to one of the high adsorption capacity materials. Then, the adsorption and desorption behaviors were investigated by batch studies. The adsorption performance showed high agreement with the Lagergren-first-order model and Langmuir isotherm with thermodynamic adsorption parameters of ΔH= 36.1 k J/mol and ΔS=200 J/（mol·K）. Desorption study revealed that 110-H could be effectively eluted by a low concentration of HCl solution（0.1 mol/L） to regenerate and reuse. Finally, the 110-H and Eu（III） loaded 110-H were characterized by IR spectroscopy and scanning electron microscope（SEM） to analyze the mechanism of adsorption, which proved to be chemisorbed.展开更多
The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium....The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb^2＋ adsorbed on D152 resin can be eluted with 0.05 mol/L HCI quantitatively. The adsorption rate constants determined under various temperatures are k288 n=2.22×10-5 s^-1, k298 K=2.51 × 10^-5 s^-1, and k308 K= 2.95 × 10^-5 s^-1, respectively. The apparent activation energy, Ea is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH^Θ=13.3 kJ/mol, ΔS^Θ=119 J/（mol·K）, and ΔG^Θ298 K =-22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb^2＋ follows Langmuir model.展开更多
Fluid coking on micro-spherical particles with acid sites on them could produce more light oils from Tahe AR.The conversion rate could increase by about 20% on the catalyst B compared to that obtained on the catalyst ...Fluid coking on micro-spherical particles with acid sites on them could produce more light oils from Tahe AR.The conversion rate could increase by about 20% on the catalyst B compared to that obtained on the catalyst A and the light oil yield could increase by about 12%.The yield of gasoline and diesel was more than 50% from Tahe AR over the catalyst B.Tests on acidity of the catalyst B by pyridine FT-IR spectrometry showed that the total acid content and the ratio of weak acid number to total acid number were higher than other catalysts.展开更多
A new method for the determination of ionization constants of polyprotic weak acids is presented. Based on dissociation equilibrium,mass balance and charge balance, the mathematic model is established and the non line...A new method for the determination of ionization constants of polyprotic weak acids is presented. Based on dissociation equilibrium,mass balance and charge balance, the mathematic model is established and the non linear least squares Gauss Newton method is applied to numerically solve the model equations. In order to get the concentration of hydrogen ion, the Debye Hückel equation is used to calculate its activity coefficient. The ionization constants of H 2SO 3 and H 2C 2O 4 obtained by this method are in good agreement with the literature values.展开更多
pH-fixed titration method for the determination of weak acids and bases has been studied in this paper.It is not necessary to know the ionization constant of weak acid or base and the concentration of titrant. This me...pH-fixed titration method for the determination of weak acids and bases has been studied in this paper.It is not necessary to know the ionization constant of weak acid or base and the concentration of titrant. This method had been applied to determine phenol,4-aminoantipyrine and glycine,whose ionization constants range from 10^(-10)to 10^(-12).The results were satisfactory.展开更多
This paper reports a new method of titration for very weak acids and bases using the appearance of incisions on oscillopolarogram to indicate the end-point.This method has the advantages of rapidity,simplicity,no indi...This paper reports a new method of titration for very weak acids and bases using the appearance of incisions on oscillopolarogram to indicate the end-point.This method has the advantages of rapidity,simplicity,no indicator needed as well as good precision.展开更多
The adsorption properties of a novel gel-type weak acid resin (110-H) for Pb2+ were investigated using chemical methods and IR spectrometry.The optimal adsorption condition of 110-H for Pb2+ is at pH=6.49 in HAc-NaAc ...The adsorption properties of a novel gel-type weak acid resin (110-H) for Pb2+ were investigated using chemical methods and IR spectrometry.The optimal adsorption condition of 110-H for Pb2+ is at pH=6.49 in HAc-NaAc medium and the statically saturated adsorption capacity is 485 mg/g at 298 K.Pb2+ adsorbed on 110-H resin can be eluted with 0.025 mol/L HCl quantificationally.The adsorption rate constants determined under the temperatures of 288,298,308 and 318 K are 2.46×10-5,3.82×10-5,4.46×10-5 and 5.71×10-5 s-1,respectively.The apparent activation energy,Ea,is 18.1 kJ/mol and the thermodynamic parameters of adsorption,ΔH=20.9 kJ/mol,ΔS=161 J/(mol.K) and ΔG298 K =-48.0 kJ/mol,respectively.The adsorption behavior of 110-H resin for Pb2+ accords with the Langmuir isotherm.Infrared spectra show that the oxygen atoms of the functional group of resin coordinate with Pb2+ to form the coordination bands.展开更多
The adsorption and desorption behaviors of Yb（Ⅲ） on gel-type weak acid resin （110） were investigated. The influence of operational conditions such as contact time,initial concentration of Yb（Ⅲ）,initial pH of s...The adsorption and desorption behaviors of Yb（Ⅲ） on gel-type weak acid resin （110） were investigated. The influence of operational conditions such as contact time,initial concentration of Yb（Ⅲ）,initial pH of solution and temperature on the adsorption of Yb（Ⅲ） were also examined. The results showed that the optimal adsorption condition of 110 resin for Yb（Ⅲ） was achieved at pH=5.5 in HAc-NaAc medium. The maximum uptake capacity of Yb（Ⅲ） was 265.8 mg/g at 298 K. Yb（Ⅲ） could be eluted by using 3.0 mol/L HCl solution and the 110 resin could be regenerated and reused. The adsorption of Yb（Ⅲ） followed the Langmuir isotherm,and the correlation coefficients were evaluated. Various thermodynamic parameters such as standard enthalpy change （△H）,standard entropy change （△S） and standard free energy change （△G） were evaluated. The adsorption of Yb（III） on the 110 resin was found to be endothermic in nature. Thomas model was successfully applied to experimental data to predict the breakthrough curves and to determine the characteristics parameters of the column useful for process design. And the resin sample both before and after adsorption was described by IR spectroscopy.展开更多
The adsorption equilibrium isotherms of three aromatic sulfonic acid compounds, 2-naphthalenesulfonic acid, p-toluenesulfonic acid and p-chlorobenzenesulfonic acid, from aqueous solutions by macroporous weak base anio...The adsorption equilibrium isotherms of three aromatic sulfonic acid compounds, 2-naphthalenesulfonic acid, p-toluenesulfonic acid and p-chlorobenzenesulfonic acid, from aqueous solutions by macroporous weak base anion exchanger within the temperature range of 293 K-313 K were obtained. Several isotherm equations were correlated with the equilibrium data, and the experimental data was found to fit the three-parameter Redlich-Peterson equation best within the entire range of concentrations. The study showed that the hydrophobicity of solute has distinct influence on adsorption capacity of the anion exchanger for the aromatic sulfonic acid. Moreover, estimations of the isosteric enthalpy, free energy, and entropy change of adsorption were also reported. The positive isosteric enthalpy and entropy change for adsorption indicate an endothermic and entropy driven process in the present study.展开更多
The “overlapping equilibria” effect observed in the processes of electrolytic dissociation of many weak multibasic organic acids determines the character of these processes. In this communication, the degree of “ov...The “overlapping equilibria” effect observed in the processes of electrolytic dissociation of many weak multibasic organic acids determines the character of these processes. In this communication, the degree of “overlapping equilibria” in case of weak dibasic organic acids is quantitatively characterized by the values of “partial” degree of dissociation for second step and ratio of the concentrations of dianion and monoanion. It has been shown that these dissociation parameters are directly connected with the values of the second dissociation constant. It has been also shown that the contribution of third dissociation step in the “overlapping equilibria” effect is especially appreciable in case of penta and hexabasic weak organic acids causing the double “overlapping” phenomenon.展开更多
模拟投料环境,探索温度、时间、氧化剂NaClO、弱碱NaHCO_(3)、弱酸NaHSO_(3)对DTD分解情况的影响。结果表明:温度低于15℃时DTD分解缓慢,高于15℃时DTD分解迅速,且随时间的延长分解加剧。氧化剂NaClO会造成产物的迅速分解,4 h DTD分解剩...模拟投料环境,探索温度、时间、氧化剂NaClO、弱碱NaHCO_(3)、弱酸NaHSO_(3)对DTD分解情况的影响。结果表明:温度低于15℃时DTD分解缓慢,高于15℃时DTD分解迅速,且随时间的延长分解加剧。氧化剂NaClO会造成产物的迅速分解,4 h DTD分解剩余24.53%。NaHCO_(3)、NaHSO_(3)的加入对DTD的分解影响较小。为避免长时间对收率的影响,合成结束后需迅速进行后处理,对后期工业化生产具有重要的指导意义。展开更多
基金Project(20133326110006)supported by Ph D Programs Foundation of Ministry of Education of ChinaProject(2014R408073)supported by College Student Innovation Projects of Zhejiang Province+2 种基金ChinaProject supported by Zhejiang Provincial Key Laboratory of Industrial Textile Materials&Manufacturing TechChina
文摘The conditions relating to enhanced adsorption procedure of earth element europium（Eu） onto gel-type weak acid resin（110-H） in aqueous solution were optimized by means of the response surface methodology（RSM）, which proved that 110-H owned satisfactory adsorption capacity（346.85 mg/g） in optimum conditions, belonging to one of the high adsorption capacity materials. Then, the adsorption and desorption behaviors were investigated by batch studies. The adsorption performance showed high agreement with the Lagergren-first-order model and Langmuir isotherm with thermodynamic adsorption parameters of ΔH= 36.1 k J/mol and ΔS=200 J/（mol·K）. Desorption study revealed that 110-H could be effectively eluted by a low concentration of HCl solution（0.1 mol/L） to regenerate and reuse. Finally, the 110-H and Eu（III） loaded 110-H were characterized by IR spectroscopy and scanning electron microscope（SEM） to analyze the mechanism of adsorption, which proved to be chemisorbed.
基金Project(2008F70059) supported by the Scientific and Technological Research Planning of Zhejiang Province, China
文摘The adsorption properties of a novel macroporous weak acid resin （D152） for Pb^2＋ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb^2＋ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb^2＋ adsorbed on D152 resin can be eluted with 0.05 mol/L HCI quantitatively. The adsorption rate constants determined under various temperatures are k288 n=2.22×10-5 s^-1, k298 K=2.51 × 10^-5 s^-1, and k308 K= 2.95 × 10^-5 s^-1, respectively. The apparent activation energy, Ea is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH^Θ=13.3 kJ/mol, ΔS^Θ=119 J/（mol·K）, and ΔG^Θ298 K =-22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb^2＋ follows Langmuir model.
文摘Fluid coking on micro-spherical particles with acid sites on them could produce more light oils from Tahe AR.The conversion rate could increase by about 20% on the catalyst B compared to that obtained on the catalyst A and the light oil yield could increase by about 12%.The yield of gasoline and diesel was more than 50% from Tahe AR over the catalyst B.Tests on acidity of the catalyst B by pyridine FT-IR spectrometry showed that the total acid content and the ratio of weak acid number to total acid number were higher than other catalysts.
文摘A new method for the determination of ionization constants of polyprotic weak acids is presented. Based on dissociation equilibrium,mass balance and charge balance, the mathematic model is established and the non linear least squares Gauss Newton method is applied to numerically solve the model equations. In order to get the concentration of hydrogen ion, the Debye Hückel equation is used to calculate its activity coefficient. The ionization constants of H 2SO 3 and H 2C 2O 4 obtained by this method are in good agreement with the literature values.
文摘pH-fixed titration method for the determination of weak acids and bases has been studied in this paper.It is not necessary to know the ionization constant of weak acid or base and the concentration of titrant. This method had been applied to determine phenol,4-aminoantipyrine and glycine,whose ionization constants range from 10^(-10)to 10^(-12).The results were satisfactory.
文摘This paper reports a new method of titration for very weak acids and bases using the appearance of incisions on oscillopolarogram to indicate the end-point.This method has the advantages of rapidity,simplicity,no indicator needed as well as good precision.
基金Project (Y404279) supported by the Natural Science Foundation of Zhejiang Province, China
文摘The adsorption properties of a novel gel-type weak acid resin (110-H) for Pb2+ were investigated using chemical methods and IR spectrometry.The optimal adsorption condition of 110-H for Pb2+ is at pH=6.49 in HAc-NaAc medium and the statically saturated adsorption capacity is 485 mg/g at 298 K.Pb2+ adsorbed on 110-H resin can be eluted with 0.025 mol/L HCl quantificationally.The adsorption rate constants determined under the temperatures of 288,298,308 and 318 K are 2.46×10-5,3.82×10-5,4.46×10-5 and 5.71×10-5 s-1,respectively.The apparent activation energy,Ea,is 18.1 kJ/mol and the thermodynamic parameters of adsorption,ΔH=20.9 kJ/mol,ΔS=161 J/(mol.K) and ΔG298 K =-48.0 kJ/mol,respectively.The adsorption behavior of 110-H resin for Pb2+ accords with the Langmuir isotherm.Infrared spectra show that the oxygen atoms of the functional group of resin coordinate with Pb2+ to form the coordination bands.
基金Project supported by the grants from the National Key Technologies Research and Development Program of China (2008BAD94B09)the Key Grant of Education Department of Zhejiang Province, China (Z200907459)
文摘The adsorption and desorption behaviors of Yb（Ⅲ） on gel-type weak acid resin （110） were investigated. The influence of operational conditions such as contact time,initial concentration of Yb（Ⅲ）,initial pH of solution and temperature on the adsorption of Yb（Ⅲ） were also examined. The results showed that the optimal adsorption condition of 110 resin for Yb（Ⅲ） was achieved at pH=5.5 in HAc-NaAc medium. The maximum uptake capacity of Yb（Ⅲ） was 265.8 mg/g at 298 K. Yb（Ⅲ） could be eluted by using 3.0 mol/L HCl solution and the 110 resin could be regenerated and reused. The adsorption of Yb（Ⅲ） followed the Langmuir isotherm,and the correlation coefficients were evaluated. Various thermodynamic parameters such as standard enthalpy change （△H）,standard entropy change （△S） and standard free energy change （△G） were evaluated. The adsorption of Yb（III） on the 110 resin was found to be endothermic in nature. Thomas model was successfully applied to experimental data to predict the breakthrough curves and to determine the characteristics parameters of the column useful for process design. And the resin sample both before and after adsorption was described by IR spectroscopy.
文摘The adsorption equilibrium isotherms of three aromatic sulfonic acid compounds, 2-naphthalenesulfonic acid, p-toluenesulfonic acid and p-chlorobenzenesulfonic acid, from aqueous solutions by macroporous weak base anion exchanger within the temperature range of 293 K-313 K were obtained. Several isotherm equations were correlated with the equilibrium data, and the experimental data was found to fit the three-parameter Redlich-Peterson equation best within the entire range of concentrations. The study showed that the hydrophobicity of solute has distinct influence on adsorption capacity of the anion exchanger for the aromatic sulfonic acid. Moreover, estimations of the isosteric enthalpy, free energy, and entropy change of adsorption were also reported. The positive isosteric enthalpy and entropy change for adsorption indicate an endothermic and entropy driven process in the present study.
文摘The “overlapping equilibria” effect observed in the processes of electrolytic dissociation of many weak multibasic organic acids determines the character of these processes. In this communication, the degree of “overlapping equilibria” in case of weak dibasic organic acids is quantitatively characterized by the values of “partial” degree of dissociation for second step and ratio of the concentrations of dianion and monoanion. It has been shown that these dissociation parameters are directly connected with the values of the second dissociation constant. It has been also shown that the contribution of third dissociation step in the “overlapping equilibria” effect is especially appreciable in case of penta and hexabasic weak organic acids causing the double “overlapping” phenomenon.
文摘模拟投料环境,探索温度、时间、氧化剂NaClO、弱碱NaHCO_(3)、弱酸NaHSO_(3)对DTD分解情况的影响。结果表明:温度低于15℃时DTD分解缓慢,高于15℃时DTD分解迅速,且随时间的延长分解加剧。氧化剂NaClO会造成产物的迅速分解,4 h DTD分解剩余24.53%。NaHCO_(3)、NaHSO_(3)的加入对DTD的分解影响较小。为避免长时间对收率的影响,合成结束后需迅速进行后处理,对后期工业化生产具有重要的指导意义。
