The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-bas...The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-based BANs is impacted by challenges related to heterogeneous data traffic requirements among nodes, includingcontention during finite backoff periods, association delays, and traffic channel access through clear channelassessment (CCA) algorithms. These challenges lead to increased packet collisions, queuing delays, retransmissions,and the neglect of critical traffic, thereby hindering performance indicators such as throughput, packet deliveryratio, packet drop rate, and packet delay. Therefore, we propose Dynamic Next Backoff Period and Clear ChannelAssessment (DNBP-CCA) schemes to address these issues. The DNBP-CCA schemes leverage a combination ofthe Dynamic Next Backoff Period (DNBP) scheme and the Dynamic Next Clear Channel Assessment (DNCCA)scheme. The DNBP scheme employs a fuzzy Takagi, Sugeno, and Kang (TSK) model’s inference system toquantitatively analyze backoff exponent, channel clearance, collision ratio, and data rate as input parameters. Onthe other hand, the DNCCA scheme dynamically adapts the CCA process based on requested data transmission tothe coordinator, considering input parameters such as buffer status ratio and acknowledgement ratio. As a result,simulations demonstrate that our proposed schemes are better than some existing representative approaches andenhance data transmission, reduce node collisions, improve average throughput, and packet delivery ratio, anddecrease average packet drop rate and packet delay.展开更多
Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater...Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater,and reservoir water in the Burqin River Basin of the Altay Mountains,China in 2021,and characterized the oxygen and hydrogen isotope variations in different water bodies via instrumental analytics and modeling.Results showed significant seasonal variations in stable isotope ratios of oxygen and hydrogen(δ18O andδ2H,respectively)and significant differences inδ18O andδ2H among different water bodies.Higherδ18O andδ2H values were mainly found in river water,while groundwater and reservoir water had lower isotope ratios.River water and groundwater showed differentδ18O-δ2H relationships with the local meteoric water line,implying that river water and groundwater are controlled by evaporative enrichment and multi-source recharge processes.The evaporative enrichment experienced by reservoir water was less significant and largely influenced by topography,recharge sources,local moisture cycling,and anthropogenic factors.Higher deuterium excess(d-excess)value of 14.34‰for river water probably represented the isotopic signature of combined contributions from direct precipitation,snow and glacial meltwater,and groundwater recharge.The average annual d-excess values of groundwater(10.60‰)and reservoir water(11.49‰)were similar to the value of global precipitation(10.00‰).The findings contribute to understanding the hydroclimatic information reflected in the month-by-month variations in stable isotopes in different water bodies and provide a reference for the study of hydrological processes and climate change in the Altay Mountains,China.展开更多
[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compa...[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compared.[Results]The processed and unprocessed Arnebiae Radix at high,medium and low doses all had a certain effect on inhibiting the rise of body temperature in rats.The high dose unprocessed group,the medium dose processed group and the high dose processed group had the best inhibitory effect on body temperature,the low dose processed group could delay the fever time,and the low dose unprocessed group had poor inhibitory effect on fever.[Conclusions]The prepared Arnebiae Radix has enhanced drug effect,and milk processed Arnebiae Radix can be used to replace common Arnebiae Radix to reduce the dosage of Arnebiae Radix and save Arnebiae Radix resources.展开更多
In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot...In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.展开更多
Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identificatio...Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identification of human body fluids,and has exhibited excellent performance in predicting single-source body fluids.The present study aims to develop a methylation SNaPshot multiplex system for body fluid identification,and accurately predict the mixture samples.In addition,the value of DNA methylation in the prediction of body fluid mixtures was further explored.Methods In the present study,420 samples of body fluid mixtures and 250 samples of single body fluids were tested using an optimized multiplex methylation system.Each kind of body fluid sample presented the specific methylation profiles of the 10 markers.Results Significant differences in methylation levels were observed between the mixtures and single body fluids.For all kinds of mixtures,the Spearman’s correlation analysis revealed a significantly strong correlation between the methylation levels and component proportions(1:20,1:10,1:5,1:1,5:1,10:1 and 20:1).Two random forest classification models were trained for the prediction of mixture types and the prediction of the mixture proportion of 2 components,based on the methylation levels of 10 markers.For the mixture prediction,Model-1 presented outstanding prediction accuracy,which reached up to 99.3%in 427 training samples,and had a remarkable accuracy of 100%in 243 independent test samples.For the mixture proportion prediction,Model-2 demonstrated an excellent accuracy of 98.8%in 252 training samples,and 98.2%in 168 independent test samples.The total prediction accuracy reached 99.3%for body fluid mixtures and 98.6%for the mixture proportions.Conclusion These results indicate the excellent capability and powerful value of the multiplex methylation system in the identification of forensic body fluid mixtures.展开更多
Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite b...Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite body.Under this background,the study provides the transverse isotropic equivalent model of concrete-granite double-layer composite based on the notion of strain energy equivalence.Assuming that the strength failure of concrete and granite meets the Mohr-Coulomb criterion,then the strength failure model of the combined body considering the joint roughness coefficient(JRC)is derived,and the influences of JRC,the height ratio of concrete to granite,and confining pressure on the strength failure characteristics of the combined body are emphatically analyzed.Finally,the model applicability is illustrated by the uniaxial and triaxial compression tests on concrete monomer,granite monomer and concretegranite composite samples(CGCSs)with different JRCs.The results revealed that the compressive strength of the composite is closer to the concrete with lower strength in the combined body under different confining pressures.Adding interface roughness causes to raise the compressive strength of the composite due to interfacial adhesion between concrete and granite,and a slowing growth trend is observed in compressive strength as roughness.The model can provide a certain reference for the stability design and evaluation of engineering rock mass.展开更多
According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are prese...According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.展开更多
Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on...Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method（ACM2） and weld element connection（CWELD） can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.展开更多
Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch ...Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.展开更多
Long-term field monitoring finds that serious surface subsidence can still occur even if the high strength cemented fill method is adopted.Combining the results of numerical simulations with global position system(GPS...Long-term field monitoring finds that serious surface subsidence can still occur even if the high strength cemented fill method is adopted.Combining the results of numerical simulations with global position system(GPS)monitoring,we took a typical filling mining mine with a steeply inclined ore body as an example,and explored its ground subsidence mechanism.The results show that the ground subsidence caused by the mining of steep ore body is characterized by two settlement centers and a significantly uneven spatial distribution,which is visibly different from ground subsidence characteristic of the coal mine.The subsidence on the hanging wall is much larger than that on the footwall,and the settlement center tends to move to the hanging wall with the increase of mining depth.The backfill improves the strength and surrounding rock bearing capacity,which leads to a lag of about 3 years of the subsidence.However,under the actions of continuous and repeated mining disturbances,the supporting effect of the backfill can only reduce the amplitude of the deformation,but it cannot prevent the occurrence of settlement.展开更多
Parkinson’s disease(PD)is one of the primary vital degenerative diseases that affect the Central Nervous System among elderly patients.It affect their quality of life drastically and millions of seniors are diagnosed...Parkinson’s disease(PD)is one of the primary vital degenerative diseases that affect the Central Nervous System among elderly patients.It affect their quality of life drastically and millions of seniors are diagnosed with PD every year worldwide.Several models have been presented earlier to detect the PD using various types of measurement data like speech,gait patterns,etc.Early identification of PD is important owing to the fact that the patient can offer important details which helps in slowing down the progress of PD.The recently-emerging Deep Learning(DL)models can leverage the past data to detect and classify PD.With this motivation,the current study develops a novel Colliding Bodies Optimization Algorithm with Optimal Kernel Extreme Learning Machine(CBO-OKELM)for diagnosis and classification of PD.The goal of the proposed CBO-OKELM technique is to identify whether PD exists or not.CBO-OKELM technique involves the design of Colliding Bodies Optimization-based Feature Selection(CBO-FS)technique for optimal subset of features.In addition,Water Strider Algorithm(WSA)with Kernel Extreme Learning Machine(KELM)model is also developed for the classification of PD.CBO algorithm is used to elect the optimal set of fea-tures whereas WSA is utilized for parameter tuning of KELM model which alto-gether helps in accomplishing the maximum PD diagnostic performance.The experimental analysis was conducted for CBO-OKELM technique against four benchmark datasets and the model portrayed better performance such as 95.68%,96.34%,92.49%,and 92.36%on Speech PD,Voice PD,Hand PD Mean-der,and Hand PD Spiral datasets respectively.展开更多
In order to determine the control dimensions of human body in pattern construction and provide the basis for size specification in clothing industry, a gray model is described and established in the application of pre...In order to determine the control dimensions of human body in pattern construction and provide the basis for size specification in clothing industry, a gray model is described and established in the application of predicting size specification. By comparing the features of gray model and regression model, it is proved that the former has many advantages over the latter, i.e. more practical and more effective in this application. So it is strongly suggested to apply the innovative gray model instead of the traditional regression model to facilitate the calculation procedure in pattern construction.展开更多
In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with som...In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force dements built on the theory of terramechanics acting on each discrete dement. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particMar structure design of the pilot miner, the special characteristics of the seafioor soil and the hydrodynamic force of near-seafloor currnt, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches.展开更多
This paper proposes the analysis model of sports human body based on computer vision tracking technology. Visual target tracking is an important research field of the computer vision, motion trajectory and it can prov...This paper proposes the analysis model of sports human body based on computer vision tracking technology. Visual target tracking is an important research field of the computer vision, motion trajectory and it can provide not only the goal, to provide the initial data movement analysis, scene understanding, behavior or the event detection in intelligent surveillance, human-computer interaction, robot visual navigation and motion recognition based on field has a broad application prospect. For this reason, it is possible to consider the use of a large number of unlabeled samples to assist the training classifier to improve its performance. This type of machine learning method using both labeled and that unlabeled samples is called the semi-supervised learning. This paper proposes the novel idea of the related research topics to propose the new perspective of the model that will be later give us the novel idea of making it efficient for further development of sport science.展开更多
Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transfo...Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transformation to curvilinear coordinates using body-fitted grids have been proposed, e.g., stand staggered grid(SSG) with interpolation, nonstaggered grid, rotated staggered grid(RSG), and fully staggered. The FD based on the RSG is somewhat superior to others because it satisfies the spatial distribution of the wave equation without additional memory and computational requirements; furthermore, it is simpler to implement. We use the RSG FD method to transform the firstorder stress–velocity equation in the curvilinear coordinates system and introduce the highprecision adaptive, unilateral mimetic finite-difference(UMFD) method to process the freeboundary conditions of an irregular surface. The numerical results suggest that the precision of the solution is higher than that of the vacuum formalism. When the minimum wavelength is low, UMFD avoids the surface wave dispersion. We compare FD methods based on RSG, SEM, and nonstaggered grid and infer that all simulation results are consistent but the computational efficiency of the RSG FD method is higher than the rest.展开更多
In the study,a quantum resonant cavity model based on wave-particle duality was proposed for the explanation of the dynamic processes of essence,vigor,and spirit in the human body in traditional Chinese medicine(TCM)....In the study,a quantum resonant cavity model based on wave-particle duality was proposed for the explanation of the dynamic processes of essence,vigor,and spirit in the human body in traditional Chinese medicine(TCM).It is assumed that there is a macro human order parameter(wave function),and its dynamics are governed by a macro potential field reflecting influences from heaven,earth,and society,and satisfy the generalized Schrodinger equation.This proposed model was applied in the study to interpret basic concepts of human body in TCM,with an aim to unfold the TCM development in the future.展开更多
This article presents an elementary introduction on various aspects of the prototypical integrable model the LiebLiniger Bose gas ranging from the cooperative to the collective features of many-body phenomena. In 1963...This article presents an elementary introduction on various aspects of the prototypical integrable model the LiebLiniger Bose gas ranging from the cooperative to the collective features of many-body phenomena. In 1963, Lieb and Liniger first solved this quantum field theory many-body problem using Bethe＇s hypothesis, i.e., a particular form of wavefunction introduced by Bethe in solving the one-dimensional Heisenberg model in 1931. Despite the Lieb-Liniger model is arguably the simplest exactly solvable model, it exhibits rich quantum many-body physics in terms of the aspects of mathematical integrability and physical universality. Moreover, the Yang-Yang grand canonical ensemble description for the model provides us with a deep understanding of quantum statistics, thermodynamics, and quantum critical phenomena at the many-body physical level. Recently, such fundamental physics of this exactly solved model has been attracting growing interest in experiments. Since 2004, there have been more than 20 experimental papers that rbported novel observations of different physical aspects of the Lieb--Liniger model in the laboratory. So far the observed results are in excellent agreement with results obtained using the analysis of this simplest exactly solved model. Those experimental observations reveal the unique beauty of integrability.展开更多
Compliant bistable mechanisms, devices with two distinct stable equilibrium positions, are used in a variety of applications, such as switches, clasps, and valves. Many kinds of compliant bistable mechanisms were prop...Compliant bistable mechanisms, devices with two distinct stable equilibrium positions, are used in a variety of applications, such as switches, clasps, and valves. Many kinds of compliant bistable mechanisms were proposed and studied during the past decade. Among them, tension-based compliant bistable mechanisms, that incorporate tension pivots as their flexible members, feature in short travel distance and low power consuming. So far, the design of this kind of bistable mechanisms is done using finite element method through trial and error, thus is time-consuming. By treating the tension pivots as fixed-guided segments and their elongation as a spring, we developed a novel three degree-of-freedom （3-DOF） pseudo-rigid-body model （PRBM） for this kind of bistable mechanisms. The principle of virtual work is used to derive the force-deflection relationship of the PRBM model. The comparison between the PRBM results and the experimental results of the force-deflection characteristics shows that the PRBM can predict not only the bistable behavior of the tension-based bistable mechanisms, but also their soft spring-like post-bistable behavior and the spring-like force-deflection characteristics when pulling in the reverse direction from the as-fabricated position, which is called reverse behavior. The 3-DOF PRBM can be used to design and identify tension-based bistable mechanisms. Using the PRBM instead of the trial-and-error method can greatly reduce the development time of this kind of bistable mechanisms.展开更多
The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the hu...The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the human body 3D modeling using one Kinect sensor modeling method. To get the human body model fast, three steps in rapid modeling of the human body are carried out. Firstly, according to anthropometric parameters, the standard model is parameterized; Secondly, the Kinect depth image of the human body model is gotten through, then, by using the PCL library the point cloud data is processed and matched, and the human body model is optimized; Finally, the realistic human body model is obtained with the rapid integration of the standard model and PCL library.展开更多
A model for studying the heat and mass exchange between the atmosphere and a water body is developed, in which the phase change process of water freezing in winter and melting in summer and the function of the convect...A model for studying the heat and mass exchange between the atmosphere and a water body is developed, in which the phase change process of water freezing in winter and melting in summer and the function of the convective mixing process are taken into consideration. The model uses enthalpy rather than temperature as the predictive variable. It helps to set up governing equations more concisely, to deal with the phase change process more easily, and make the numerical scheme simpler. The model is verified by observed data from Lake Kinneret for a non-frozen lake in summer time, and Lake Lower Two Medicine for a frozen lake in winter time. Reasonably good agreements between the model simulations and observed data indicate that the model can serve as a component for a water body in a land surface model. In order to more efficiently apply the scheme in a climate system model, a sensitivity study of various division schemes with less layers in the vertical direction in the water body is conducted. The results of the study show that the division with around 10 vertical layers could produce a prediction accuracy that is comparable to the fine division with around 40 layers.展开更多
基金Research Supporting Project Number(RSP2024R421),King Saud University,Riyadh,Saudi Arabia。
文摘The increased adoption of Internet of Medical Things (IoMT) technologies has resulted in the widespread use ofBody Area Networks (BANs) in medical and non-medical domains. However, the performance of IEEE 802.15.4-based BANs is impacted by challenges related to heterogeneous data traffic requirements among nodes, includingcontention during finite backoff periods, association delays, and traffic channel access through clear channelassessment (CCA) algorithms. These challenges lead to increased packet collisions, queuing delays, retransmissions,and the neglect of critical traffic, thereby hindering performance indicators such as throughput, packet deliveryratio, packet drop rate, and packet delay. Therefore, we propose Dynamic Next Backoff Period and Clear ChannelAssessment (DNBP-CCA) schemes to address these issues. The DNBP-CCA schemes leverage a combination ofthe Dynamic Next Backoff Period (DNBP) scheme and the Dynamic Next Clear Channel Assessment (DNCCA)scheme. The DNBP scheme employs a fuzzy Takagi, Sugeno, and Kang (TSK) model’s inference system toquantitatively analyze backoff exponent, channel clearance, collision ratio, and data rate as input parameters. Onthe other hand, the DNCCA scheme dynamically adapts the CCA process based on requested data transmission tothe coordinator, considering input parameters such as buffer status ratio and acknowledgement ratio. As a result,simulations demonstrate that our proposed schemes are better than some existing representative approaches andenhance data transmission, reduce node collisions, improve average throughput, and packet delivery ratio, anddecrease average packet drop rate and packet delay.
基金This work was funded by the Science and Technology Program of Gansu Province(23ZDFA017,22ZD6FA005)the Third Xinjiang Scientific Expedition Program(2022xjkk0802).
文摘Characterization of the spatial and temporal variability of stable isotopes in surface water is essential for interpreting hydrological processes.In this study,we collected the water samples of river water,groundwater,and reservoir water in the Burqin River Basin of the Altay Mountains,China in 2021,and characterized the oxygen and hydrogen isotope variations in different water bodies via instrumental analytics and modeling.Results showed significant seasonal variations in stable isotope ratios of oxygen and hydrogen(δ18O andδ2H,respectively)and significant differences inδ18O andδ2H among different water bodies.Higherδ18O andδ2H values were mainly found in river water,while groundwater and reservoir water had lower isotope ratios.River water and groundwater showed differentδ18O-δ2H relationships with the local meteoric water line,implying that river water and groundwater are controlled by evaporative enrichment and multi-source recharge processes.The evaporative enrichment experienced by reservoir water was less significant and largely influenced by topography,recharge sources,local moisture cycling,and anthropogenic factors.Higher deuterium excess(d-excess)value of 14.34‰for river water probably represented the isotopic signature of combined contributions from direct precipitation,snow and glacial meltwater,and groundwater recharge.The average annual d-excess values of groundwater(10.60‰)and reservoir water(11.49‰)were similar to the value of global precipitation(10.00‰).The findings contribute to understanding the hydroclimatic information reflected in the month-by-month variations in stable isotopes in different water bodies and provide a reference for the study of hydrological processes and climate change in the Altay Mountains,China.
基金Health Science and Technology Program of Inner Mongolia Autonomous Region(202201450)Key R&D and Achievement Transformation Project of Inner Mongolia Autonomous Region(2023YFDZ0063)+3 种基金Project of Improving the Scientific Research and Innovation Ability of Young Teachers in Universities Directly under Inner Mongolia Autonomous Region(GXKY22139)Open Fund Project of National and Local Joint Engineering Research Center for Mongolian Medicine Research and Development(MDK2021026)Key Discipline Construction Project of Traditional Chinese Pharmacy(Mongolian Pharmacy)of Inner Mongolia Minzu University(ZYX007)Basic Operating Expenses for Scientific Research of Universities Directly under Inner Mongolia Autonomous Region in 2022"Study on the Change of Shikonin Content During Milk Processed Arnebiae Radix".
文摘[Objectives]To investigate the synergistic effect of Arnebiae Radix after processing.[Methods]The effects of raw Arnebiae Radix and milk processed Arnebiae Radix on hypothermia in yeast-induced febrile rats were compared.[Results]The processed and unprocessed Arnebiae Radix at high,medium and low doses all had a certain effect on inhibiting the rise of body temperature in rats.The high dose unprocessed group,the medium dose processed group and the high dose processed group had the best inhibitory effect on body temperature,the low dose processed group could delay the fever time,and the low dose unprocessed group had poor inhibitory effect on fever.[Conclusions]The prepared Arnebiae Radix has enhanced drug effect,and milk processed Arnebiae Radix can be used to replace common Arnebiae Radix to reduce the dosage of Arnebiae Radix and save Arnebiae Radix resources.
基金Supported by the Sinopec Science and Technology Project(P21040-1).
文摘In the second member of the Upper Triassic Xujiahe Formation(T_(3)x_(2))in the Xinchang area,western Sichuan Basin,only a low percent of reserves has been recovered,and the geological model of gas reservoir sweet spot remains unclear.Based on a large number of core,field outcrop,test and logging-seismic data,the T_(3)x_(2) gas reservoir in the Xinchang area is examined.The concept of fault-fold-fracture body(FFFB)is proposed,and its types are recognized.The main factors controlling fracture development are identified,and the geological models of FFFB are established.FFFB refers to faults,folds and associated fractures reservoirs.According to the characteristics and genesis,FFFBs can be divided into three types:fault-fracture body,fold-fracture body,and fault-fold body.In the hanging wall of the fault,the closer to the fault,the more developed the effective fractures;the greater the fold amplitude and the closer to the fold hinge plane,the more developed the effective fractures.Two types of geological models of FFFB are established:fault-fold fracture,and matrix storage and permeability.The former can be divided into two subtypes:network fracture,and single structural fracture,and the later can be divided into three subtypes:bedding fracture,low permeability pore,and extremely low permeability pore.The process for evaluating favorable FFFB zones was formed to define favorable development targets and support the well deployment for purpose of high production.The study results provide a reference for the exploration and development of deep tight sandstone oil and gas reservoirs in China.
基金supported by the grants from the Natural Science Foundation of Hubei Province(No.2020CFB780)the Fundamental Research Funds for the Central Universities(No.2017KFYXJJ020).
文摘Objective Body fluid mixtures are complex biological samples that frequently occur in crime scenes,and can provide important clues for criminal case analysis.DNA methylation assay has been applied in the identification of human body fluids,and has exhibited excellent performance in predicting single-source body fluids.The present study aims to develop a methylation SNaPshot multiplex system for body fluid identification,and accurately predict the mixture samples.In addition,the value of DNA methylation in the prediction of body fluid mixtures was further explored.Methods In the present study,420 samples of body fluid mixtures and 250 samples of single body fluids were tested using an optimized multiplex methylation system.Each kind of body fluid sample presented the specific methylation profiles of the 10 markers.Results Significant differences in methylation levels were observed between the mixtures and single body fluids.For all kinds of mixtures,the Spearman’s correlation analysis revealed a significantly strong correlation between the methylation levels and component proportions(1:20,1:10,1:5,1:1,5:1,10:1 and 20:1).Two random forest classification models were trained for the prediction of mixture types and the prediction of the mixture proportion of 2 components,based on the methylation levels of 10 markers.For the mixture prediction,Model-1 presented outstanding prediction accuracy,which reached up to 99.3%in 427 training samples,and had a remarkable accuracy of 100%in 243 independent test samples.For the mixture proportion prediction,Model-2 demonstrated an excellent accuracy of 98.8%in 252 training samples,and 98.2%in 168 independent test samples.The total prediction accuracy reached 99.3%for body fluid mixtures and 98.6%for the mixture proportions.Conclusion These results indicate the excellent capability and powerful value of the multiplex methylation system in the identification of forensic body fluid mixtures.
基金The authors would like to acknowledge financial supports from the National Natural Science Foundation of China(Nos.41941019 and 52274145)Department of Science and Technology of Shaanxi Province(No.2021TD-55)+2 种基金“111”Center,Program of the Ministry of Education of China(No.B18046)Natural Science Foundation of Shaanxi Province(No.2020JQ-373)the Fundamental Research Funds for the Central Universities,CHD(No.300102261101).
文摘Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite body.Under this background,the study provides the transverse isotropic equivalent model of concrete-granite double-layer composite based on the notion of strain energy equivalence.Assuming that the strength failure of concrete and granite meets the Mohr-Coulomb criterion,then the strength failure model of the combined body considering the joint roughness coefficient(JRC)is derived,and the influences of JRC,the height ratio of concrete to granite,and confining pressure on the strength failure characteristics of the combined body are emphatically analyzed.Finally,the model applicability is illustrated by the uniaxial and triaxial compression tests on concrete monomer,granite monomer and concretegranite composite samples(CGCSs)with different JRCs.The results revealed that the compressive strength of the composite is closer to the concrete with lower strength in the combined body under different confining pressures.Adding interface roughness causes to raise the compressive strength of the composite due to interfacial adhesion between concrete and granite,and a slowing growth trend is observed in compressive strength as roughness.The model can provide a certain reference for the stability design and evaluation of engineering rock mass.
文摘According to the characteristics of bore data,a model of 3D geologic body with generalized tri-prism as the primitive modeling element is constructed while the modeling process and key algorithms of modeling are presented here in detail.Using this method,the original bore data go through Delaunay triangulation to generate irregular triangular network on the surface,and then links stratum segments on the adjoining bores in session to form tri-prisms which would be pinched out.Finally stratified 3D geologic body model is built by an iterated search which searches for consecutive layer of the same property.The result shows that this method can effectively simulate stratified stratum modeling.
基金supported by National Natural Science Foundation of China(Grant No.10772060)Heilongjiang Provincial Natural Science Foundation with Excellent Young Investigators of China(GrantNo.JC2006-13)
文摘Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method（ACM2） and weld element connection（CWELD） can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.
基金supported by National Natural Science Foundation of China (Grant No. 60873003)
文摘Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.
基金support from the National Natural Science Foundation of China(Grant Nos.42072305 and 41831293)。
文摘Long-term field monitoring finds that serious surface subsidence can still occur even if the high strength cemented fill method is adopted.Combining the results of numerical simulations with global position system(GPS)monitoring,we took a typical filling mining mine with a steeply inclined ore body as an example,and explored its ground subsidence mechanism.The results show that the ground subsidence caused by the mining of steep ore body is characterized by two settlement centers and a significantly uneven spatial distribution,which is visibly different from ground subsidence characteristic of the coal mine.The subsidence on the hanging wall is much larger than that on the footwall,and the settlement center tends to move to the hanging wall with the increase of mining depth.The backfill improves the strength and surrounding rock bearing capacity,which leads to a lag of about 3 years of the subsidence.However,under the actions of continuous and repeated mining disturbances,the supporting effect of the backfill can only reduce the amplitude of the deformation,but it cannot prevent the occurrence of settlement.
基金Taif University Researchers Supporting Project number(TURSP-2020/161),Taif University,Taif,Saudi Arabia.
文摘Parkinson’s disease(PD)is one of the primary vital degenerative diseases that affect the Central Nervous System among elderly patients.It affect their quality of life drastically and millions of seniors are diagnosed with PD every year worldwide.Several models have been presented earlier to detect the PD using various types of measurement data like speech,gait patterns,etc.Early identification of PD is important owing to the fact that the patient can offer important details which helps in slowing down the progress of PD.The recently-emerging Deep Learning(DL)models can leverage the past data to detect and classify PD.With this motivation,the current study develops a novel Colliding Bodies Optimization Algorithm with Optimal Kernel Extreme Learning Machine(CBO-OKELM)for diagnosis and classification of PD.The goal of the proposed CBO-OKELM technique is to identify whether PD exists or not.CBO-OKELM technique involves the design of Colliding Bodies Optimization-based Feature Selection(CBO-FS)technique for optimal subset of features.In addition,Water Strider Algorithm(WSA)with Kernel Extreme Learning Machine(KELM)model is also developed for the classification of PD.CBO algorithm is used to elect the optimal set of fea-tures whereas WSA is utilized for parameter tuning of KELM model which alto-gether helps in accomplishing the maximum PD diagnostic performance.The experimental analysis was conducted for CBO-OKELM technique against four benchmark datasets and the model portrayed better performance such as 95.68%,96.34%,92.49%,and 92.36%on Speech PD,Voice PD,Hand PD Mean-der,and Hand PD Spiral datasets respectively.
文摘In order to determine the control dimensions of human body in pattern construction and provide the basis for size specification in clothing industry, a gray model is described and established in the application of predicting size specification. By comparing the features of gray model and regression model, it is proved that the former has many advantages over the latter, i.e. more practical and more effective in this application. So it is strongly suggested to apply the innovative gray model instead of the traditional regression model to facilitate the calculation procedure in pattern construction.
基金supported by the National High Technology Research and Development Program of China(863 Program, Grant No.2006AA09Z240)the National Deep-Sea Technology Project of Development and Re-search(Grant No.DYXM-115-04-02-01)
文摘In order to achieve the complex dynamic analysis of the self-propelled seafloor pilot miner moving on the seafloor of extremely cohesive soft soil and further to make it possible to integrate the miner system with some subsystems to form the complete integrated deep ocean mining pilot system and perform dynamic analysis, a new method for the dynamic modeling and analysis of the miner is proposed and developed in this paper, resulting in a simplified 3D single-body vehicle model with three translational and three rotational degrees of freedom, while the track-terrain interaction model is built by partitioning the track-terrain interface into discrete elements with parameterized force dements built on the theory of terramechanics acting on each discrete dement. To evaluate and verify the correctness and effectiveness of this new modeling and analysis method, typical comparative studies with regard to computational efficiency and solution accuracy are carried out between the traditional modeling method of building the tracked vehicle as a multi-body model and the new modeling method. In full consideration of the particMar structure design of the pilot miner, the special characteristics of the seafioor soil and the hydrodynamic force of near-seafloor currnt, the dynamic simulation analysis of the miner is performed and discussed, which can provide useful guidance and reference for the practical miner system in design and operation. This new method can not only realize the rapid dynamic simulation analysis of the miner but also make possible the integration and rapid dynamic analysis of the complete integrated deep ocean mining pilot system in further researches.
文摘This paper proposes the analysis model of sports human body based on computer vision tracking technology. Visual target tracking is an important research field of the computer vision, motion trajectory and it can provide not only the goal, to provide the initial data movement analysis, scene understanding, behavior or the event detection in intelligent surveillance, human-computer interaction, robot visual navigation and motion recognition based on field has a broad application prospect. For this reason, it is possible to consider the use of a large number of unlabeled samples to assist the training classifier to improve its performance. This type of machine learning method using both labeled and that unlabeled samples is called the semi-supervised learning. This paper proposes the novel idea of the related research topics to propose the new perspective of the model that will be later give us the novel idea of making it efficient for further development of sport science.
基金supported by the National Nature Science Foundation of China(Nos.41504102 and 41604037)National Science and Technology Major Project(No.2016ZX05015-006)Yangtze University Youth Found(No.2015cqn32)
文摘Finite-difference(FD) methods are widely used in seismic forward modeling owing to their computational efficiency but are not readily applicable to irregular topographies. Thus, several FD methods based on the transformation to curvilinear coordinates using body-fitted grids have been proposed, e.g., stand staggered grid(SSG) with interpolation, nonstaggered grid, rotated staggered grid(RSG), and fully staggered. The FD based on the RSG is somewhat superior to others because it satisfies the spatial distribution of the wave equation without additional memory and computational requirements; furthermore, it is simpler to implement. We use the RSG FD method to transform the firstorder stress–velocity equation in the curvilinear coordinates system and introduce the highprecision adaptive, unilateral mimetic finite-difference(UMFD) method to process the freeboundary conditions of an irregular surface. The numerical results suggest that the precision of the solution is higher than that of the vacuum formalism. When the minimum wavelength is low, UMFD avoids the surface wave dispersion. We compare FD methods based on RSG, SEM, and nonstaggered grid and infer that all simulation results are consistent but the computational efficiency of the RSG FD method is higher than the rest.
基金the ENN Institute of Life Science and Technology for their financial support。
文摘In the study,a quantum resonant cavity model based on wave-particle duality was proposed for the explanation of the dynamic processes of essence,vigor,and spirit in the human body in traditional Chinese medicine(TCM).It is assumed that there is a macro human order parameter(wave function),and its dynamics are governed by a macro potential field reflecting influences from heaven,earth,and society,and satisfy the generalized Schrodinger equation.This proposed model was applied in the study to interpret basic concepts of human body in TCM,with an aim to unfold the TCM development in the future.
基金supported by the National Basic Research Program of China(Grant No.2012CB922101)the National Natural Science Foundation of China(Grant Nos.11374331 and 11304357)
文摘This article presents an elementary introduction on various aspects of the prototypical integrable model the LiebLiniger Bose gas ranging from the cooperative to the collective features of many-body phenomena. In 1963, Lieb and Liniger first solved this quantum field theory many-body problem using Bethe＇s hypothesis, i.e., a particular form of wavefunction introduced by Bethe in solving the one-dimensional Heisenberg model in 1931. Despite the Lieb-Liniger model is arguably the simplest exactly solvable model, it exhibits rich quantum many-body physics in terms of the aspects of mathematical integrability and physical universality. Moreover, the Yang-Yang grand canonical ensemble description for the model provides us with a deep understanding of quantum statistics, thermodynamics, and quantum critical phenomena at the many-body physical level. Recently, such fundamental physics of this exactly solved model has been attracting growing interest in experiments. Since 2004, there have been more than 20 experimental papers that rbported novel observations of different physical aspects of the Lieb--Liniger model in the laboratory. So far the observed results are in excellent agreement with results obtained using the analysis of this simplest exactly solved model. Those experimental observations reveal the unique beauty of integrability.
基金supported by National Natural Science Foundation of China(Grant No.50805110)Foundation for Key Program of Ministry of Education of China (Grant No.109145)Fundamental Research Funds for the Central Universities of China (Grant No.JY10000904010)
文摘Compliant bistable mechanisms, devices with two distinct stable equilibrium positions, are used in a variety of applications, such as switches, clasps, and valves. Many kinds of compliant bistable mechanisms were proposed and studied during the past decade. Among them, tension-based compliant bistable mechanisms, that incorporate tension pivots as their flexible members, feature in short travel distance and low power consuming. So far, the design of this kind of bistable mechanisms is done using finite element method through trial and error, thus is time-consuming. By treating the tension pivots as fixed-guided segments and their elongation as a spring, we developed a novel three degree-of-freedom （3-DOF） pseudo-rigid-body model （PRBM） for this kind of bistable mechanisms. The principle of virtual work is used to derive the force-deflection relationship of the PRBM model. The comparison between the PRBM results and the experimental results of the force-deflection characteristics shows that the PRBM can predict not only the bistable behavior of the tension-based bistable mechanisms, but also their soft spring-like post-bistable behavior and the spring-like force-deflection characteristics when pulling in the reverse direction from the as-fabricated position, which is called reverse behavior. The 3-DOF PRBM can be used to design and identify tension-based bistable mechanisms. Using the PRBM instead of the trial-and-error method can greatly reduce the development time of this kind of bistable mechanisms.
基金Supported by MOE(Ministry of Education in China)Project of Humanities and Social Sciences(No.13YJC890027)the National Natural Science Foundations of China(No.61003173)+1 种基金the Fundamental Research Funds for the Central Universities(No.2012ZZ0063)the Science and Technology Project of Guangzhou City(No.2012J4100002)
文摘The 3D shape of the human body is useful for applications in fitness, games and apparel. Accurate body scanners, howev- er, are expensive, limiting the availability of 3D body models. In this paper, we focus on the human body 3D modeling using one Kinect sensor modeling method. To get the human body model fast, three steps in rapid modeling of the human body are carried out. Firstly, according to anthropometric parameters, the standard model is parameterized; Secondly, the Kinect depth image of the human body model is gotten through, then, by using the PCL library the point cloud data is processed and matched, and the human body model is optimized; Finally, the realistic human body model is obtained with the rapid integration of the standard model and PCL library.
文摘A model for studying the heat and mass exchange between the atmosphere and a water body is developed, in which the phase change process of water freezing in winter and melting in summer and the function of the convective mixing process are taken into consideration. The model uses enthalpy rather than temperature as the predictive variable. It helps to set up governing equations more concisely, to deal with the phase change process more easily, and make the numerical scheme simpler. The model is verified by observed data from Lake Kinneret for a non-frozen lake in summer time, and Lake Lower Two Medicine for a frozen lake in winter time. Reasonably good agreements between the model simulations and observed data indicate that the model can serve as a component for a water body in a land surface model. In order to more efficiently apply the scheme in a climate system model, a sensitivity study of various division schemes with less layers in the vertical direction in the water body is conducted. The results of the study show that the division with around 10 vertical layers could produce a prediction accuracy that is comparable to the fine division with around 40 layers.
