Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enh...Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enhance the performance of guided wave damage detection in noisy environments is crucial.This paper introduces a local temporal principal component analysis(PCA)reconstruction approach for denoising guided waves prior to implementing unsupervised damage detection,achieved through novel autoencoder-based reconstruction.Experimental results demonstrate that the proposed denoising method significantly enhances damage detection performance when guided waves are contaminated by noise,with SNR values ranging from 10 to-5 dB.Following the implementation of the proposed denoising approach,the AUC score can elevate from 0.65 to 0.96 when dealing with guided waves corrputed by noise at a level of-5 dB.Additionally,the paper provides guidance on selecting the appropriate number of components used in the denoising PCA reconstruction,aiding in the optimization of the damage detection in noisy conditions.展开更多
The active control theory and methods of initial disturbances for rockets and missiles are investigated. The rocket or missile/launcher is simplified as a flexible beam excited by a moving varying velocity rigid body ...The active control theory and methods of initial disturbances for rockets and missiles are investigated. The rocket or missile/launcher is simplified as a flexible beam excited by a moving varying velocity rigid body which has two points in contact with the beam. The control force is applied at the supporting point on the beam. Active control strategies based on optimal control theory are proposed and computer simulation is carried out. Simulation results are consistent with the theoretical results, and show that the active control strategies proposed can accomplish the purpose to control the initial disturbances actively. The results show that active control of initial disturbances for rockets and missiles is feasible for application.展开更多
The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stabilit...The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.展开更多
Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. T...Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.展开更多
The dynanaic model of a novel electric power steering（EPS） system integrated with active front steer- ing function and the three-freedom steering model are built. Based on these models, the concepts and the quanti- ...The dynanaic model of a novel electric power steering（EPS） system integrated with active front steer- ing function and the three-freedom steering model are built. Based on these models, the concepts and the quanti- tative expressions of road feel, sensitivity, and operation stability of the steering are introduced. Then, according to constrained optimization features of multi-variable function, a genetic algorithm is designed. Making the road feel of the steering as optimization objective, and operation stability and sensitivity of the steering as constraints, the system parameters are optimized by the genetic and the coordinate rotation algorithms. Simulation results show that the optimization of the novel EPS system by the genetic algorithm can effectively improve the road feel, thus providing a theoretical basis for the design and optimization of the novel EPS system.展开更多
This paper analyzes the fuzzy variable structure control algorithms for delay systems and describes the compensation mechanism of the integral factor to the effect of the delay. Based on the linearized model of the co...This paper analyzes the fuzzy variable structure control algorithms for delay systems and describes the compensation mechanism of the integral factor to the effect of the delay. Based on the linearized model of the congestion-avoidance flow-control mode of transmission control protocol (TCP), we present delay control algorithms for active queue management (AQM) and discuss the parameter tuning of the algorithms. The NS (network simulator) simulation results show that the proposed control scheme for the nonlinear TCP/AQM model has good performance and robustness with respect to the uncertainties of the round-trip time (RTT) and the number of active TCP sessions. Compared to other similar schemes, our algorithms perform better in terms of packet loss ratio, throughput and butter fluctuation.展开更多
Active shape models (ASM), consisting of a shape model and a local gray-level appearance model, can be used to locate the objects in images. In original ASM scheme, the model of object′s gray-level variations is base...Active shape models (ASM), consisting of a shape model and a local gray-level appearance model, can be used to locate the objects in images. In original ASM scheme, the model of object′s gray-level variations is based on the assumption of one-dimensional sampling and searching method. In this work a new way to model the gray-level appearance of the objects is explored, using a two-dimensional sampling and searching technique in a rectangular area around each landmark of object shape. The ASM based on this improvement is compared with the original ASM on an identical medical image set for task of spine localization. Experiments demonstrate that the method produces significantly fast, effective, accurate results for spine localization in medical images.展开更多
Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward u...Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward unbalance force compensation scheme is proposed based on variable step-size least mean square（LMS） algorithm as the feed-forward compensation controller. The controller can provide some suitable sinusoidal signals to com- pensate the feedback unbalance response signals synchronous with the rotary frequency, then reduce the fluctua- tion of the control currents and weaken the active control of AMB system. The variable step-size proportional to the rotational frequency is deduced by analyzing the principle of normal LMS algorithm and its deficiency in the application of real-time filtering of AMB system. Experimental results show that the new method can implement real-time unbalance force compensation in a wide frequency band, reduce the effect of unbalance stimulant force on the housing of AMB system, and provide convenience to improve rotational speed.展开更多
Active vibration control is an effective way of increasing robustness of the design to meet the stringent accuracy requirements for space structures. This paper presents the results of active damping realized by a pie...Active vibration control is an effective way of increasing robustness of the design to meet the stringent accuracy requirements for space structures. This paper presents the results of active damping realized by a piezoelectric active member to control the vibration of a four-bay four-longern aluminum truss structure with cantilever boundary. The active member, which utilizes a piezoelectric actuating unit and an integrated load cell, is designed for vibration control of the space truss structures. Active damping control is realized using direct velocity feedback around the active member. The placement of the active member as one of the most important factor of affecting the control system performance, is also investigated by modal dissipation energy ratio as indicator. The active damping effectiveness is evaluated by comparing the closed-loop response with the open loop response.展开更多
In vertebrates, non-lens βγ-crystallins are widely expressed in various tissues and their functions are not well known. The molecular mechanisms of trefoil factors （TFFs）, which involved in mucosal healing and tum...In vertebrates, non-lens βγ-crystallins are widely expressed in various tissues and their functions are not well known. The molecular mechanisms of trefoil factors （TFFs）, which involved in mucosal healing and tumorigenesis, have remained elusive. βγ-CAT is a novel multifunctional protein complex of non-lens βγ-crystallin and trefoil factor from frog skin secretions. Here we report that βγ-CAT could induce sustained contraction of isolated rabbit aortic rings in dosage （2-35nmol/L） and endothelium dependent manners （P〈0.01 ）. In addition, in situ immunofluorescence indicated that positive TNF-α signals were mainly detected at the endothelial cell layer of βγ-CAT （25nmol/L） treated rings. Furthermore, βγ-CAT induced primary cultured rabbit thoracic aortic endothelial cells （RAECs） rapidly to release TNF-α. After βγ-CAT （25nmol/L） treated for 10 and 30min, the levels of the endothelial cells released TNF-ct were 34.17±5.10 pg/mL and 98.01±4.67 pg/mL （P〈0.01）, respectively. In conclusion, βγ-CAT could induce sustained contraction of isolated aortic rings, and the contractile effect might be partially explained by the release of TNF-α. These findings will give new insight into understanding the functions and physiological roles of non-lens βγ-crystallins and trefoil factors.展开更多
Presented in this paper is a semi active vibration control strategy based on the vibration absorber with adjustable clearance in elastic component. The control law of the clearance for alleviating the vibration of pr...Presented in this paper is a semi active vibration control strategy based on the vibration absorber with adjustable clearance in elastic component. The control law of the clearance for alleviating the vibration of primary system is derived by means of harmonic balancing technique so that the working frequency of the vibration absorber can trace the frequency variation of the harmonic excitation. The efficacy of the strategy is demonstrated by numerical simulations for attenuating the steady state vibration of a SDOF system and a 2 DOF system, which are under the harmonic excitation with slowly varied frequency in a wide range.展开更多
With the aim to address the problems presented in knowledge utilization in knowledge-intensive enterprises, the ontology-based proactive knowledge system （OPKS） is put forward to improve knowledge utilization. Proac...With the aim to address the problems presented in knowledge utilization in knowledge-intensive enterprises, the ontology-based proactive knowledge system （OPKS） is put forward to improve knowledge utilization. Proactive knowledge service is taken as the basic idea in the OPKS. The user knowledge requirement is taken as the driving factor and described by the user knowledge requirement. Ontologies are used to present the semantic of heterogeneous knowledge sources and ontology mapping is used to realize the interoperation of heterogeneous knowledge sources. The required knowledge is found by matching the user knowledge requirement with knowledge sources and is provided to the user proactively. System analysis and design of OPKS is carded on by adopting UML. The OPKS is implemented in Java language. Application in a certain institute shows that the OPKS can raise efficiency of knowledge utilization in knowledge-intensive enterprises.展开更多
Active vibration control and stability analysis of cantilever plate are discussed. Based on the analysis of characteristic equation of the closed loop control system, it is shown that such an active control may incre...Active vibration control and stability analysis of cantilever plate are discussed. Based on the analysis of characteristic equation of the closed loop control system, it is shown that such an active control may increase damping properties of the system, meanwhile it may result in instability of the system. It is stable when the feedback only occurs between the collocated sensors and actuators, but it may be unstable when there exists the feedback between sensors and actuators, which mainly depends on the property of the gain matrix of feedback. If the gain matrix is symmetric and definitely positive, the system is stable.展开更多
Based on an avalanche photodiode（ APD） detecting array working in Geiger mode（ GM-APD）, a high-performance infrared sensor readout integrated circuit（ ROIC） used for infrared 3D（ three-dimensional） imaging is ...Based on an avalanche photodiode（ APD） detecting array working in Geiger mode（ GM-APD）, a high-performance infrared sensor readout integrated circuit（ ROIC） used for infrared 3D（ three-dimensional） imaging is proposed. The system mainly consists of three functional modules, including active quenching circuit（ AQC）, time-to-digital converter（ TDC） circuit and other timing controller circuit. Each AQC and TDC circuit together constitutes the pixel circuit. Under the cooperation with other modules, the current signal generated by the GM-APD sensor is detected by the AQC, and the photon time-of-flight（ TOF） is measured and converted to a digital signal output to achieve a better noise suppression and a higher detection sensitivity by the TDC. The ROIC circuit is fabricated by the CSMC 0. 5 μm standard CMOS technology. The array size is 8 × 8, and the center distance of two adjacent cells is 100μm. The measurement results of the chip showthat the performance of the circuit is good, and the chip can achieve 1 ns time resolution with a 250 MHz reference clock, and the circuit can be used in the array structure of the infrared detection system or focal plane array（ FPA）.展开更多
Objective: To measure the calibration of different levels in aortic root andevaluate the relationships between the aortic sinuses and its neighbouring structure. Methods:Thirty heart specimens from cadaver of normal a...Objective: To measure the calibration of different levels in aortic root andevaluate the relationships between the aortic sinuses and its neighbouring structure. Methods:Thirty heart specimens from cadaver of normal adult were studied. The dimensions of four levels inaortic root were measured and the relationships between the aortic sinues and its neighbouringstructure were observed. Results: The dimensions of four levels in aortic root obtained as follows;Sinus > STJ1 > STJ0 > Base (P < 0.05) . The dimensions of the aortic valve leaflets were measured.The right coronary leaflet was larger than those of the left coronary and noncor-onary leaflets .But there was no statistical signiftcane (P > 0.05) . The relationships between the middle axis ofthe anterior valve of the bicuspid valve and the aortic sinuses were examined. The middle axis ofthe anterior valve in 26 specimens (86.6%) located between the left coronary sinus and thenoncoronary sinus . The relationship between the aortic prominence of the right atrium and theaortic sinuses was examined. The aortic prominence was formed from noncoronary sinus in 22 specimens(73.3%) . The relationship between the middle point of the right and left pulmonary valves and theaortic sinuses was examined. The middle point of the right and left pulmonary valves in 24 specimens(80%) was faced to the point between the right and left aortic sinuses . Conclusion: The dimensionof the four levels in aortic root is as follows, sinus > STJ1 > STJ0 > Base (P < 0.05) . There wasno statistical significance in the size of the three aortic valve leaflets (P > 0.05).展开更多
Adaptive truss structures are a new kind of structures with integrated active members,whose dynamic characteristies can be beneficially modified to meet mission requirements.Active members containing actuating and sen...Adaptive truss structures are a new kind of structures with integrated active members,whose dynamic characteristies can be beneficially modified to meet mission requirements.Active members containing actuating and sensing units are the major components of adaptive truss structures.Modeling of adaptive truss structures is a key step to analyze the structural dynamic characteristics.A new experimental modal analysis approach,in which active members are used as excitatiDn sources for modal test,has been proposed in this paper.The excitation forces generated by the active members, which are different from the excitation forces exerted on structures in the conventional modal test,are internal forces for the truss structures.The relation between internal excitation forces and external forces is revealed such that the traditional identification method can be adopted to obtain modal parameters of adaptive structures.Placement problem of the active member in adaptive truss structures is also discussed in this work. Modal test and analysis are conducted with a planar adaptive truss structure by using piezoelectric active members in order to verify the feasibility and effectiveness of the proposed method.展开更多
基金National Science Foundation of Zhejiang under Contract(LY23E010001)。
文摘Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enhance the performance of guided wave damage detection in noisy environments is crucial.This paper introduces a local temporal principal component analysis(PCA)reconstruction approach for denoising guided waves prior to implementing unsupervised damage detection,achieved through novel autoencoder-based reconstruction.Experimental results demonstrate that the proposed denoising method significantly enhances damage detection performance when guided waves are contaminated by noise,with SNR values ranging from 10 to-5 dB.Following the implementation of the proposed denoising approach,the AUC score can elevate from 0.65 to 0.96 when dealing with guided waves corrputed by noise at a level of-5 dB.Additionally,the paper provides guidance on selecting the appropriate number of components used in the denoising PCA reconstruction,aiding in the optimization of the damage detection in noisy conditions.
文摘The active control theory and methods of initial disturbances for rockets and missiles are investigated. The rocket or missile/launcher is simplified as a flexible beam excited by a moving varying velocity rigid body which has two points in contact with the beam. The control force is applied at the supporting point on the beam. Active control strategies based on optimal control theory are proposed and computer simulation is carried out. Simulation results are consistent with the theoretical results, and show that the active control strategies proposed can accomplish the purpose to control the initial disturbances actively. The results show that active control of initial disturbances for rockets and missiles is feasible for application.
文摘The effects of active control on the vehicle roll were studied. Based on the theory that distributing the greater roll stiffness to the rear axle can improve tracking trajectory capacity and increase maneuver stability, an eight degrees of freedom vehicle model was established and feedforward feedback control strategy was devised to control distribution of lateral load transfer on the front axle and the rear one. Simulation results showed that the proposed control strategy can improve comfort, maneuver stability and safety effectively.
文摘Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.
基金Supported by the National Natural Science Foundation of China(51005115)the Risiting Scholar Foundation of the State Key Lab of Mechanical Transmission in Chongqing University(SKLMT-KFKT-201105)theScience Fund of State Key Laboratory of Automotive Satefy and Energy in Tsinghua University(KF11202)~~
文摘The dynanaic model of a novel electric power steering（EPS） system integrated with active front steer- ing function and the three-freedom steering model are built. Based on these models, the concepts and the quanti- tative expressions of road feel, sensitivity, and operation stability of the steering are introduced. Then, according to constrained optimization features of multi-variable function, a genetic algorithm is designed. Making the road feel of the steering as optimization objective, and operation stability and sensitivity of the steering as constraints, the system parameters are optimized by the genetic and the coordinate rotation algorithms. Simulation results show that the optimization of the novel EPS system by the genetic algorithm can effectively improve the road feel, thus providing a theoretical basis for the design and optimization of the novel EPS system.
文摘This paper analyzes the fuzzy variable structure control algorithms for delay systems and describes the compensation mechanism of the integral factor to the effect of the delay. Based on the linearized model of the congestion-avoidance flow-control mode of transmission control protocol (TCP), we present delay control algorithms for active queue management (AQM) and discuss the parameter tuning of the algorithms. The NS (network simulator) simulation results show that the proposed control scheme for the nonlinear TCP/AQM model has good performance and robustness with respect to the uncertainties of the round-trip time (RTT) and the number of active TCP sessions. Compared to other similar schemes, our algorithms perform better in terms of packet loss ratio, throughput and butter fluctuation.
文摘Active shape models (ASM), consisting of a shape model and a local gray-level appearance model, can be used to locate the objects in images. In original ASM scheme, the model of object′s gray-level variations is based on the assumption of one-dimensional sampling and searching method. In this work a new way to model the gray-level appearance of the objects is explored, using a two-dimensional sampling and searching technique in a rectangular area around each landmark of object shape. The ASM based on this improvement is compared with the original ASM on an identical medical image set for task of spine localization. Experiments demonstrate that the method produces significantly fast, effective, accurate results for spine localization in medical images.
基金Supported by the National Natural Science Foundation of China(50437010)the National High Technology Research and Development Program of China("863"Program)(2006AA05Z205)the Project of Six Talented Peak of Jiangsu Province(07-D-013)~~
文摘Aiming at the stability and others properties of active magnetic bearing （AMB） system influenced by the periodic unbalance stimulation synchronous with rotor rotational speed, a new real-time adaptive feed-forward unbalance force compensation scheme is proposed based on variable step-size least mean square（LMS） algorithm as the feed-forward compensation controller. The controller can provide some suitable sinusoidal signals to com- pensate the feedback unbalance response signals synchronous with the rotary frequency, then reduce the fluctua- tion of the control currents and weaken the active control of AMB system. The variable step-size proportional to the rotational frequency is deduced by analyzing the principle of normal LMS algorithm and its deficiency in the application of real-time filtering of AMB system. Experimental results show that the new method can implement real-time unbalance force compensation in a wide frequency band, reduce the effect of unbalance stimulant force on the housing of AMB system, and provide convenience to improve rotational speed.
文摘Active vibration control is an effective way of increasing robustness of the design to meet the stringent accuracy requirements for space structures. This paper presents the results of active damping realized by a piezoelectric active member to control the vibration of a four-bay four-longern aluminum truss structure with cantilever boundary. The active member, which utilizes a piezoelectric actuating unit and an integrated load cell, is designed for vibration control of the space truss structures. Active damping control is realized using direct velocity feedback around the active member. The placement of the active member as one of the most important factor of affecting the control system performance, is also investigated by modal dissipation energy ratio as indicator. The active damping effectiveness is evaluated by comparing the closed-loop response with the open loop response.
基金National Natural Science Foundation (30630014, 30570359)The grant of "Key Research Direction-KSCX2-YW-R-088" from Chinese Academy of Sciences~~
文摘In vertebrates, non-lens βγ-crystallins are widely expressed in various tissues and their functions are not well known. The molecular mechanisms of trefoil factors （TFFs）, which involved in mucosal healing and tumorigenesis, have remained elusive. βγ-CAT is a novel multifunctional protein complex of non-lens βγ-crystallin and trefoil factor from frog skin secretions. Here we report that βγ-CAT could induce sustained contraction of isolated rabbit aortic rings in dosage （2-35nmol/L） and endothelium dependent manners （P〈0.01 ）. In addition, in situ immunofluorescence indicated that positive TNF-α signals were mainly detected at the endothelial cell layer of βγ-CAT （25nmol/L） treated rings. Furthermore, βγ-CAT induced primary cultured rabbit thoracic aortic endothelial cells （RAECs） rapidly to release TNF-α. After βγ-CAT （25nmol/L） treated for 10 and 30min, the levels of the endothelial cells released TNF-ct were 34.17±5.10 pg/mL and 98.01±4.67 pg/mL （P〈0.01）, respectively. In conclusion, βγ-CAT could induce sustained contraction of isolated aortic rings, and the contractile effect might be partially explained by the release of TNF-α. These findings will give new insight into understanding the functions and physiological roles of non-lens βγ-crystallins and trefoil factors.
文摘Presented in this paper is a semi active vibration control strategy based on the vibration absorber with adjustable clearance in elastic component. The control law of the clearance for alleviating the vibration of primary system is derived by means of harmonic balancing technique so that the working frequency of the vibration absorber can trace the frequency variation of the harmonic excitation. The efficacy of the strategy is demonstrated by numerical simulations for attenuating the steady state vibration of a SDOF system and a 2 DOF system, which are under the harmonic excitation with slowly varied frequency in a wide range.
基金The National Natural Science Foundation of China(No50674086)Specialized Research Fund for the Doctoral Program of Higher Education (No20060290508)
文摘With the aim to address the problems presented in knowledge utilization in knowledge-intensive enterprises, the ontology-based proactive knowledge system （OPKS） is put forward to improve knowledge utilization. Proactive knowledge service is taken as the basic idea in the OPKS. The user knowledge requirement is taken as the driving factor and described by the user knowledge requirement. Ontologies are used to present the semantic of heterogeneous knowledge sources and ontology mapping is used to realize the interoperation of heterogeneous knowledge sources. The required knowledge is found by matching the user knowledge requirement with knowledge sources and is provided to the user proactively. System analysis and design of OPKS is carded on by adopting UML. The OPKS is implemented in Java language. Application in a certain institute shows that the OPKS can raise efficiency of knowledge utilization in knowledge-intensive enterprises.
文摘Active vibration control and stability analysis of cantilever plate are discussed. Based on the analysis of characteristic equation of the closed loop control system, it is shown that such an active control may increase damping properties of the system, meanwhile it may result in instability of the system. It is stable when the feedback only occurs between the collocated sensors and actuators, but it may be unstable when there exists the feedback between sensors and actuators, which mainly depends on the property of the gain matrix of feedback. If the gain matrix is symmetric and definitely positive, the system is stable.
基金The Natural Science Foundation of Jiangsu Province(No.BK2012559)Qing Lan Project of Jiangsu Province
文摘Based on an avalanche photodiode（ APD） detecting array working in Geiger mode（ GM-APD）, a high-performance infrared sensor readout integrated circuit（ ROIC） used for infrared 3D（ three-dimensional） imaging is proposed. The system mainly consists of three functional modules, including active quenching circuit（ AQC）, time-to-digital converter（ TDC） circuit and other timing controller circuit. Each AQC and TDC circuit together constitutes the pixel circuit. Under the cooperation with other modules, the current signal generated by the GM-APD sensor is detected by the AQC, and the photon time-of-flight（ TOF） is measured and converted to a digital signal output to achieve a better noise suppression and a higher detection sensitivity by the TDC. The ROIC circuit is fabricated by the CSMC 0. 5 μm standard CMOS technology. The array size is 8 × 8, and the center distance of two adjacent cells is 100μm. The measurement results of the chip showthat the performance of the circuit is good, and the chip can achieve 1 ns time resolution with a 250 MHz reference clock, and the circuit can be used in the array structure of the infrared detection system or focal plane array（ FPA）.
文摘Objective: To measure the calibration of different levels in aortic root andevaluate the relationships between the aortic sinuses and its neighbouring structure. Methods:Thirty heart specimens from cadaver of normal adult were studied. The dimensions of four levels inaortic root were measured and the relationships between the aortic sinues and its neighbouringstructure were observed. Results: The dimensions of four levels in aortic root obtained as follows;Sinus > STJ1 > STJ0 > Base (P < 0.05) . The dimensions of the aortic valve leaflets were measured.The right coronary leaflet was larger than those of the left coronary and noncor-onary leaflets .But there was no statistical signiftcane (P > 0.05) . The relationships between the middle axis ofthe anterior valve of the bicuspid valve and the aortic sinuses were examined. The middle axis ofthe anterior valve in 26 specimens (86.6%) located between the left coronary sinus and thenoncoronary sinus . The relationship between the aortic prominence of the right atrium and theaortic sinuses was examined. The aortic prominence was formed from noncoronary sinus in 22 specimens(73.3%) . The relationship between the middle point of the right and left pulmonary valves and theaortic sinuses was examined. The middle point of the right and left pulmonary valves in 24 specimens(80%) was faced to the point between the right and left aortic sinuses . Conclusion: The dimensionof the four levels in aortic root is as follows, sinus > STJ1 > STJ0 > Base (P < 0.05) . There wasno statistical significance in the size of the three aortic valve leaflets (P > 0.05).
文摘Adaptive truss structures are a new kind of structures with integrated active members,whose dynamic characteristies can be beneficially modified to meet mission requirements.Active members containing actuating and sensing units are the major components of adaptive truss structures.Modeling of adaptive truss structures is a key step to analyze the structural dynamic characteristics.A new experimental modal analysis approach,in which active members are used as excitatiDn sources for modal test,has been proposed in this paper.The excitation forces generated by the active members, which are different from the excitation forces exerted on structures in the conventional modal test,are internal forces for the truss structures.The relation between internal excitation forces and external forces is revealed such that the traditional identification method can be adopted to obtain modal parameters of adaptive structures.Placement problem of the active member in adaptive truss structures is also discussed in this work. Modal test and analysis are conducted with a planar adaptive truss structure by using piezoelectric active members in order to verify the feasibility and effectiveness of the proposed method.
