The effect of MnO4- and silver content on electrochemical behaviour of five commercial Pb-Ag alloy anodes was studied in acid zinc sulphate electrolyte with and without MnO4- ions at 38 °C during potential decay ...The effect of MnO4- and silver content on electrochemical behaviour of five commercial Pb-Ag alloy anodes was studied in acid zinc sulphate electrolyte with and without MnO4- ions at 38 °C during potential decay periods. When the anodes were immersed into acid zinc sulphate electrolyte without MnO4- ions, the Pb-0.72%Ag anode entered complete passivation state in the shortest time among the five anodes, followed by anodes Pb-0.67%Ag, Pb-0.60%Ag, Pb-0.58%Ag and Pb-0.29%Ag-0.1%Ca by measurement of open circuit potential. During immersion of the anodes, MnO4 ions accelerated the passivation and increased the corrosion current density of the anodes. After immersion in zinc electrolyte with MnO4-, the anode Pb-0.72%Ag had the best corrosion resistance, followed by anodes Pb-0.67%Ag, Pb-0.60%Ag, then the close anodes Pb-0.58%Ag and Pb-0.29%Ag-0.1%Ca by the electrochemical impedance spectroscopy （EIS） analysis.展开更多
Electrochemical behavior of layered LiNi0.5Mn0.5O2 in LiNO3 aqueous solution and its cyclic fading mechanism in electrolytes with different pH values were investigated. CV results show that LiNi0.5Mn0.5O2 has good ele...Electrochemical behavior of layered LiNi0.5Mn0.5O2 in LiNO3 aqueous solution and its cyclic fading mechanism in electrolytes with different pH values were investigated. CV results show that LiNi0.5Mn0.5O2 has good electrochemical reversible behaviors in 5 mol/L LiNO3 solution. Meanwhile, the electrode in 5 mol/L LiNO3 with pH value of 12 demonstrates the best electrochemical stability. Based on the electrochemical impedance spectroscopy （EIS）, X-ray diffraction （XRD） and scanning electron microscopy （SEM） results, it is proposed that suppressed charge-transfer resistance is the major reason, which is probably ascribed to the more stable electrode surface and less structure change.展开更多
The mechanism for capacity fading of18650lithium ion full cells under room-temperature(RT)is discussedsystematically.The capacity loss of18650cells is about12.91%after500cycles.The cells after cycles are analyzed by X...The mechanism for capacity fading of18650lithium ion full cells under room-temperature(RT)is discussedsystematically.The capacity loss of18650cells is about12.91%after500cycles.The cells after cycles are analyzed by XRD,SEM,EIS and CV.Impedance measurement shows an overall increase in the cell resistance upon cycling.Moreover,it also presents anincreased charge-transfer resistance(Rct)for the cell cycled at RT.CV test shows that the reversibility of lithium ioninsertion/extraction reaction is reduced.The capacity fading for the cells cycled can be explained by taking into account the repeatedfilm formation over the surface of anode and the side reactions.The products of side reactions deposited on separator are able toreduce the porosity of separator.As a result,the migration resistance of lithium ion between the cathode and anode would beincreased,leading the fading of capacity and potential.展开更多
The flux-weakening performance of a permanent magnet brushless AC drive was investigated using both floating-point and fixed-point DSP controllers. A significant current oscillation was observed when the drive was ope...The flux-weakening performance of a permanent magnet brushless AC drive was investigated using both floating-point and fixed-point DSP controllers. A significant current oscillation was observed when the drive was operated at high-speed in the flux-weakening mode with the fixed-point DSP. The investigation showed that this was due to the on-line compensation of the winding resistance voltage drop and quantisation errors associated with the fixed-point architecture of the DSP. A simple look-up table scheme is proposed to eliminate the oscillation and to achieve extended flux-weakening capability.展开更多
The helicity amplitudes for the processes of e^＋e^- →J/ψ→γηc→γYY（Y： hyperon） are presented, together with the joint angular distributions for ηc decays into ∧∧,∑^0 ∑^0, and [1]-[1]＋. The sensitivities...The helicity amplitudes for the processes of e^＋e^- →J/ψ→γηc→γYY（Y： hyperon） are presented, together with the joint angular distributions for ηc decays into ∧∧,∑^0 ∑^0, and [1]-[1]＋. The sensitivities to measure the hyperon decay parameters in these decays are evaluated based on the helicity amplitudes. The prospects to test the Bell inequality in experiment using the decay of ηc→∧∧ are discussed.展开更多
Nano-metric magnesium silicate and zinc silicate with particle size of about 50-70nm were prepared in water by the method of chemical deposition. The antiwear and friction reducing abilities of the nano-silicates, as ...Nano-metric magnesium silicate and zinc silicate with particle size of about 50-70nm were prepared in water by the method of chemical deposition. The antiwear and friction reducing abilities of the nano-silicates, as well as their composites with oleic acid tri-ethanolamine （OATEA）, were evaluated on a four-ball friction tester. The topographies and tribochemical features of the worn surfaces were analyzed by scanning electron microscope （SEM） and X-ray photoelectron spectroscope （XPS）. Results show that nano-silicates alone provide poor antiwear and friction reducing abilities in water, but exhibits excellent synergism with OATEA in reducing friction and wear. The synergism in reducing friction and wear between nano- silicates and OATEA does exist almost regardless of particte sizes and species, and may be attributed, on one hand, to the formation of an adsorption film of OATEA, and, on the other hand, to the formation oftribochemical species of silicon dioxide and iron oxides on the friction surfaces. Tribo-reactions and tribo-adsorptions of nano-silicates and OATEA would produce hereby an effective composite boundary lubrication film, which could efficiently enhance the anti-wear and friction-reducing abilities of water.展开更多
High concentration alkaline silica sol has been prepared by the method of vacuum distillation, which shows that the stable and high concentration silica sol can be obtained under conditions as follows： 70℃, vacuum d...High concentration alkaline silica sol has been prepared by the method of vacuum distillation, which shows that the stable and high concentration silica sol can be obtained under conditions as follows： 70℃, vacuum degree of 0.095Mpa and dispersant of SDS. The experimental results show that the sol particles size decreases with mass concentration first and then increase, sol viscosity increases with mass concentration during the concentrating process. The TEM method was used to study the dispersion behavior of sol particles, its result showed that sol particles dispersed more uniformly after concentrating process than before concentrating distinctly. It could be concluded that the disperse degree of alkaline silica sol could be increased by addition of right dispersant. The dispersion mechanism of dispersant in alkaline silica sol was also discussed.展开更多
The objective of this research is to study the effect of grinding powdered superplasticizer, Portland cement, sand, and silica fume on the properties of fresh and hardened concrete. Lose Angeles Machine was used to gr...The objective of this research is to study the effect of grinding powdered superplasticizer, Portland cement, sand, and silica fume on the properties of fresh and hardened concrete. Lose Angeles Machine was used to grind these constituents. The program was arranged to determine the effect of cycles＇ number, superplasticizer type and dosage, silica fume dosage and condition, and gravel to sand ratio on properties of concrete. Naphthalene sulphonated formaldehyde （NSF） superplasticizers in the forms of liquid and powdered were used. Silica fume may be grinded with the other constituents （grinded）, or added to concrete mixer （normal）. The water/cement （w/c） ratio varied from 0.35 to 0.55 to achieve a constant slump （50-90 mm）. Slumps, bulk density and mechanical properties of concrete were measured. Scanning electron microscope （SEM） was also used to show the differences between traditional and superplasticized concrete. The results showed that grinding the mixture enhances fresh and hardened concrete properties. It is also observed that grinding the mixture for 500 cycles is more effective than other numbers of grinding. In addition, superplasticized concrete exhibits compressive strength higher than traditional one at varied ages. Moreover, using powdered superplasticizer has a remarkable effect on enhancing concrete properties rather than using it in a liquid form. A dosage of 1% by weight of cement gave the highest results of compressive strength. Silica fume has an essential role in improving concrete strength and durability since it acts as very efficient void filler and as a super pozzolana. SEM observations illustrate that grinding the mixture enhances transition zone （TZ） properties and makes it denser. On the other hand, grinded mixture can be packaged in bags and transported for use in crowded cities, and so, enhances quality control, since the only requirement to obtain superplasticized concrete is to add water and gravel. This technique has many benefits such as; saving cement, labor and noise, high quality control, and enhancing concrete permeability and durability. There are many fields of application of superplasticized concrete such as; in locations which are not easily accessible by ordinary concreting techniques, in repairing and strengthen, thin coating, and for small projects when ready mix supply is not feasible.展开更多
Ti6Al4V alloy manufactured by electron powder bed fusion(EPBF)was separately heat-treated by stress-relief annealing at 600℃,annealing at 800℃,and solid solution at 920℃ for 1 h.Then,the friction and wear tests wer...Ti6Al4V alloy manufactured by electron powder bed fusion(EPBF)was separately heat-treated by stress-relief annealing at 600℃,annealing at 800℃,and solid solution at 920℃ for 1 h.Then,the friction and wear tests were conducted on the samples before and after heat treatment to analyze the properties and mechanism of friction and wear behavior.Results show that the sample annealed at 600℃ for 1 h has the optimal wear resistance,and the wear mass loss reduces by 44%.The sample annealed at 800℃ for 1 h possesses the optimal anti-friction performance,and the coefficient of friction reduces by 14%.This research provides a simple heat treatment method to improve the friction and wear resistance of Ti6Al4V alloy manufactured by EPBF.展开更多
Turbulent boundary layer control(TBLC) for skin-friction drag reduction is a relatively new technology made possible through the advances in computational-simulation capabilities,which have improved the understanding ...Turbulent boundary layer control(TBLC) for skin-friction drag reduction is a relatively new technology made possible through the advances in computational-simulation capabilities,which have improved the understanding of the flow structures of turbulence.Advances in micro-electronic technology have enabled the fabrication of active device systems able to manipulating these structures.The combination of simulation,understanding and micro-actuation technologies offers new opportunities to significantly decrease drag,and by doing so,to increase fuel efficiency of future aircraft.The literature review that follows shows that the application of active control turbulent skin-friction drag reduction is considered of prime importance by industry,even though it is still at a low technology readiness level(TRL).This review presents the state of the art of different technologies oriented to the active and passive control for turbulent skin-friction drag reduction and contributes to the improvement of these technologies.展开更多
We study theoretically the effect of weak external magnetic fields on persistent spin helix states in semiconductor two-dimensional electron gases with both Rashba and linear-in-momentum Dresselhaus spin-orbit couplin...We study theoretically the effect of weak external magnetic fields on persistent spin helix states in semiconductor two-dimensional electron gases with both Rashba and linear-in-momentum Dresselhaus spin-orbit coupling.We show that in the presence of weak external magnetic fields, some basic properties of a persistent spin helix state,including the dispersion relation between the decay time and the magnitude of the wavevector, the maximum decay time and the value of the characteristic magnitude of the wavevector at which the maximum decay time occurs, will all depend sensitively on the directions of applied external magnetic fields.展开更多
基金Project(RDCPJ346365-06)supported by the Natural Sciences and Engineering Research Council of CanadaProject(51208193)supported by the National Natural Science Foundation of ChinaProject(11jj6034)supported by the Hunan Provincial Natural Science Foundation
文摘The effect of MnO4- and silver content on electrochemical behaviour of five commercial Pb-Ag alloy anodes was studied in acid zinc sulphate electrolyte with and without MnO4- ions at 38 °C during potential decay periods. When the anodes were immersed into acid zinc sulphate electrolyte without MnO4- ions, the Pb-0.72%Ag anode entered complete passivation state in the shortest time among the five anodes, followed by anodes Pb-0.67%Ag, Pb-0.60%Ag, Pb-0.58%Ag and Pb-0.29%Ag-0.1%Ca by measurement of open circuit potential. During immersion of the anodes, MnO4 ions accelerated the passivation and increased the corrosion current density of the anodes. After immersion in zinc electrolyte with MnO4-, the anode Pb-0.72%Ag had the best corrosion resistance, followed by anodes Pb-0.67%Ag, Pb-0.60%Ag, then the close anodes Pb-0.58%Ag and Pb-0.29%Ag-0.1%Ca by the electrochemical impedance spectroscopy （EIS） analysis.
基金Project(21301193)supported by the National Nature Science Foundation of ChinaProject(2013M530356)supported by the China Postdoctoral Science Foundation Funded+1 种基金Project(CUSZC201303)supported by the Scientific Research Foundation of Central South Universitythe Open-End Found for Valuable and Precision Instruments of Central South University
文摘Electrochemical behavior of layered LiNi0.5Mn0.5O2 in LiNO3 aqueous solution and its cyclic fading mechanism in electrolytes with different pH values were investigated. CV results show that LiNi0.5Mn0.5O2 has good electrochemical reversible behaviors in 5 mol/L LiNO3 solution. Meanwhile, the electrode in 5 mol/L LiNO3 with pH value of 12 demonstrates the best electrochemical stability. Based on the electrochemical impedance spectroscopy （EIS）, X-ray diffraction （XRD） and scanning electron microscopy （SEM） results, it is proposed that suppressed charge-transfer resistance is the major reason, which is probably ascribed to the more stable electrode surface and less structure change.
基金Project(51574287)supported by the National Natural Science Foundation of ChinaProject(2015CX001)supported by the Innovation-driven Plan in Central South University,China
文摘The mechanism for capacity fading of18650lithium ion full cells under room-temperature(RT)is discussedsystematically.The capacity loss of18650cells is about12.91%after500cycles.The cells after cycles are analyzed by XRD,SEM,EIS and CV.Impedance measurement shows an overall increase in the cell resistance upon cycling.Moreover,it also presents anincreased charge-transfer resistance(Rct)for the cell cycled at RT.CV test shows that the reversibility of lithium ioninsertion/extraction reaction is reduced.The capacity fading for the cells cycled can be explained by taking into account the repeatedfilm formation over the surface of anode and the side reactions.The products of side reactions deposited on separator are able toreduce the porosity of separator.As a result,the migration resistance of lithium ion between the cathode and anode would beincreased,leading the fading of capacity and potential.
文摘The flux-weakening performance of a permanent magnet brushless AC drive was investigated using both floating-point and fixed-point DSP controllers. A significant current oscillation was observed when the drive was operated at high-speed in the flux-weakening mode with the fixed-point DSP. The investigation showed that this was due to the on-line compensation of the winding resistance voltage drop and quantisation errors associated with the fixed-point architecture of the DSP. A simple look-up table scheme is proposed to eliminate the oscillation and to achieve extended flux-weakening capability.
基金Supported by the National Natural Science Foundation of ChinaYouth Innovation Project of IHEPthe Innovation Projcct of Guangxi Graduate Eduction under Grant No. 2007106020702M54
文摘The helicity amplitudes for the processes of e^＋e^- →J/ψ→γηc→γYY（Y： hyperon） are presented, together with the joint angular distributions for ηc decays into ∧∧,∑^0 ∑^0, and [1]-[1]＋. The sensitivities to measure the hyperon decay parameters in these decays are evaluated based on the helicity amplitudes. The prospects to test the Bell inequality in experiment using the decay of ηc→∧∧ are discussed.
基金supported by the National Natural Science Foundation of China (No. 50275147)the Program for New Century Excellent Talents in Chinese University (No. NCET-04-1002)
文摘Nano-metric magnesium silicate and zinc silicate with particle size of about 50-70nm were prepared in water by the method of chemical deposition. The antiwear and friction reducing abilities of the nano-silicates, as well as their composites with oleic acid tri-ethanolamine （OATEA）, were evaluated on a four-ball friction tester. The topographies and tribochemical features of the worn surfaces were analyzed by scanning electron microscope （SEM） and X-ray photoelectron spectroscope （XPS）. Results show that nano-silicates alone provide poor antiwear and friction reducing abilities in water, but exhibits excellent synergism with OATEA in reducing friction and wear. The synergism in reducing friction and wear between nano- silicates and OATEA does exist almost regardless of particte sizes and species, and may be attributed, on one hand, to the formation of an adsorption film of OATEA, and, on the other hand, to the formation oftribochemical species of silicon dioxide and iron oxides on the friction surfaces. Tribo-reactions and tribo-adsorptions of nano-silicates and OATEA would produce hereby an effective composite boundary lubrication film, which could efficiently enhance the anti-wear and friction-reducing abilities of water.
文摘High concentration alkaline silica sol has been prepared by the method of vacuum distillation, which shows that the stable and high concentration silica sol can be obtained under conditions as follows： 70℃, vacuum degree of 0.095Mpa and dispersant of SDS. The experimental results show that the sol particles size decreases with mass concentration first and then increase, sol viscosity increases with mass concentration during the concentrating process. The TEM method was used to study the dispersion behavior of sol particles, its result showed that sol particles dispersed more uniformly after concentrating process than before concentrating distinctly. It could be concluded that the disperse degree of alkaline silica sol could be increased by addition of right dispersant. The dispersion mechanism of dispersant in alkaline silica sol was also discussed.
文摘The objective of this research is to study the effect of grinding powdered superplasticizer, Portland cement, sand, and silica fume on the properties of fresh and hardened concrete. Lose Angeles Machine was used to grind these constituents. The program was arranged to determine the effect of cycles＇ number, superplasticizer type and dosage, silica fume dosage and condition, and gravel to sand ratio on properties of concrete. Naphthalene sulphonated formaldehyde （NSF） superplasticizers in the forms of liquid and powdered were used. Silica fume may be grinded with the other constituents （grinded）, or added to concrete mixer （normal）. The water/cement （w/c） ratio varied from 0.35 to 0.55 to achieve a constant slump （50-90 mm）. Slumps, bulk density and mechanical properties of concrete were measured. Scanning electron microscope （SEM） was also used to show the differences between traditional and superplasticized concrete. The results showed that grinding the mixture enhances fresh and hardened concrete properties. It is also observed that grinding the mixture for 500 cycles is more effective than other numbers of grinding. In addition, superplasticized concrete exhibits compressive strength higher than traditional one at varied ages. Moreover, using powdered superplasticizer has a remarkable effect on enhancing concrete properties rather than using it in a liquid form. A dosage of 1% by weight of cement gave the highest results of compressive strength. Silica fume has an essential role in improving concrete strength and durability since it acts as very efficient void filler and as a super pozzolana. SEM observations illustrate that grinding the mixture enhances transition zone （TZ） properties and makes it denser. On the other hand, grinded mixture can be packaged in bags and transported for use in crowded cities, and so, enhances quality control, since the only requirement to obtain superplasticized concrete is to add water and gravel. This technique has many benefits such as; saving cement, labor and noise, high quality control, and enhancing concrete permeability and durability. There are many fields of application of superplasticized concrete such as; in locations which are not easily accessible by ordinary concreting techniques, in repairing and strengthen, thin coating, and for small projects when ready mix supply is not feasible.
基金National Natural Science Foundation of China(51975036)Guangdong Province Key R&D Project(2018B090904004)。
文摘Ti6Al4V alloy manufactured by electron powder bed fusion(EPBF)was separately heat-treated by stress-relief annealing at 600℃,annealing at 800℃,and solid solution at 920℃ for 1 h.Then,the friction and wear tests were conducted on the samples before and after heat treatment to analyze the properties and mechanism of friction and wear behavior.Results show that the sample annealed at 600℃ for 1 h has the optimal wear resistance,and the wear mass loss reduces by 44%.The sample annealed at 800℃ for 1 h possesses the optimal anti-friction performance,and the coefficient of friction reduces by 14%.This research provides a simple heat treatment method to improve the friction and wear resistance of Ti6Al4V alloy manufactured by EPBF.
基金supported by the European Commission though the Research and Innovation action DRAGY(Grant No.690623)the Ministry of Industry and Information Technology(MIIT)of the Chinese government
文摘Turbulent boundary layer control(TBLC) for skin-friction drag reduction is a relatively new technology made possible through the advances in computational-simulation capabilities,which have improved the understanding of the flow structures of turbulence.Advances in micro-electronic technology have enabled the fabrication of active device systems able to manipulating these structures.The combination of simulation,understanding and micro-actuation technologies offers new opportunities to significantly decrease drag,and by doing so,to increase fuel efficiency of future aircraft.The literature review that follows shows that the application of active control turbulent skin-friction drag reduction is considered of prime importance by industry,even though it is still at a low technology readiness level(TRL).This review presents the state of the art of different technologies oriented to the active and passive control for turbulent skin-friction drag reduction and contributes to the improvement of these technologies.
基金Supported by the National Natural Science Foundation of China under Grant No.10874049
文摘We study theoretically the effect of weak external magnetic fields on persistent spin helix states in semiconductor two-dimensional electron gases with both Rashba and linear-in-momentum Dresselhaus spin-orbit coupling.We show that in the presence of weak external magnetic fields, some basic properties of a persistent spin helix state,including the dispersion relation between the decay time and the magnitude of the wavevector, the maximum decay time and the value of the characteristic magnitude of the wavevector at which the maximum decay time occurs, will all depend sensitively on the directions of applied external magnetic fields.
