According to the cutting characteristics of progressive spiral movement by rotary cutting of the disc cutter, using the broken theory of interaction of compression and shearing, the three-axis force rotary cutting mec...According to the cutting characteristics of progressive spiral movement by rotary cutting of the disc cutter, using the broken theory of interaction of compression and shearing, the three-axis force rotary cutting mechanical model of disc cutter was established and the influence of installation radius, the phase difference and the cutter space on the mechanics of disc cutter were analyzed. The results show that on the same radial line of tunneling interface, the boring distance of cutting tools installed on a different radius is not equal. The cutting radial line of tunneling interface is a polyline and its height is determined by phase angle and penetration of cutting tools. Both phase difference and the installation radius between adjacent disc cutters have little effect on the vertical force and rolling force, but increase with the increase in cutter spacing. In addition, when increasing phase difference and cutter space bilaterally, and reducing installation radius simultaneously, the lateral force would be improved. Related results have been verified onl O0 t rotary tool cutting test platform.展开更多
A mathematic model is established using infinitesimal geometry for the cutting edge design of special milling cutters which use equal lead helix as cutting edges; equations are given for front-end and proclitic surfac...A mathematic model is established using infinitesimal geometry for the cutting edge design of special milling cutters which use equal lead helix as cutting edges; equations are given for front-end and proclitic surface of revolution of ball pillar milling cutters, ball taper milling cutters and angularly conical milling cutters; and corresponding models are established for the continuity cutting edge curves of milling cutters. Typical examples are given to illustrate the applications of mathematic models, which prove the correctness and applicability of these geometric models.展开更多
Being one of their prominent exploitative characteristics, cutting tools durability depends on the character, intensity and the speed of wearing. Identification of tool wearing is of great significance for the purpose...Being one of their prominent exploitative characteristics, cutting tools durability depends on the character, intensity and the speed of wearing. Identification of tool wearing is of great significance for the purpose of avoiding sooner or later replacement of tools. The parameters of tool wearing can be measured by out-process and in-process-measuring systems. Given the extremely limiting role of the former in modern production lines, development of the latter （the indirect measuring systems） has gained prominence, The basis of indirect measuring systems comprises a set of various signals originating from the units of the system under treatment which stand in certain correlations with the wearing parameters. The paper presents mathematical models of axial force designed on the basis of experimental research in drilling tempered steel by twist drills made of high-speed steel manufactured by powder metallurgy.展开更多
As to probe the factors affecting the roughness and surface properties of work piece in mirco-cutting machining process, according to the principle of energy balance, using the method of experiments combining with the...As to probe the factors affecting the roughness and surface properties of work piece in mirco-cutting machining process, according to the principle of energy balance, using the method of experiments combining with theoretical analysis, this paper investigates the effect of cutting edge radius on the unit cutting force, the cutting component forces ratio Fy/Fz, as well as the roughness and surface properties of the work-piece. Experimental results show that the value of tool cutting edge arc ρ has a significant impact on elastic-plastic deformation of the cutting area, and its influence on the surface quality of processing and precision is greater than common cutting. The method of calculating the theoretical limits of the diamond tool cutting edge radius is feasible. The value of 0.0001 μm has some guiding significance for the developement of suitable cutting thickness to ensure the normal cutting.展开更多
Quantitative measurement of the cutter blade sharpness is yet a difficult problem, since so far there has been no appropriate testing method. In this paper, a technique is introduced for measuring the cutter blade sha...Quantitative measurement of the cutter blade sharpness is yet a difficult problem, since so far there has been no appropriate testing method. In this paper, a technique is introduced for measuring the cutter blade sharpness at different testing conditions. The sharpness of cutter blades are measured by detecting the force to cut off the fiber with a material strength testing machine, and the results indicated that the technique could be used to measure the cutter blade sharpness satisfactorily. The fiber tension and downward speed of cutter blades are recommended to be 4.9 cN and 50 mm/min respectively for cutting 0.22 mm PET fiber.展开更多
Mar-M247 is a nickel-based alloy which is well known as difficult-to-machine material due to its characteristics of high strength, poor thermal diffusion and work hardening. Calculation of shear stress by an analytica...Mar-M247 is a nickel-based alloy which is well known as difficult-to-machine material due to its characteristics of high strength, poor thermal diffusion and work hardening. Calculation of shear stress by an analytical force model to indicate the effect of coating material, cutting speed, feed rate on tool life and surface roughness was conducted experimentally. Cutting tests were performed using round inserts, with cutting speeds ranging from 50 to 300 rn/min, and feed rates from 0.1 to 0.4 mm/tooth, without using cooling liquids. The behavior of the TiN and TiCN layers using various cutting conditions was analyzed with orthogonal machining force model. Cutting results indicate that different coated tools, together with cutting variables, play a significant role in determining the machinability when milling Mar-M247.展开更多
基金Project(2007CB714002) supported by the National Basic Research Program of ChinaProject(51074180) supported by the National Natural Science Foundation of ChinaProject(2010FJ1002) supported by Hunan Municipal Science and Technology Program,China
文摘According to the cutting characteristics of progressive spiral movement by rotary cutting of the disc cutter, using the broken theory of interaction of compression and shearing, the three-axis force rotary cutting mechanical model of disc cutter was established and the influence of installation radius, the phase difference and the cutter space on the mechanics of disc cutter were analyzed. The results show that on the same radial line of tunneling interface, the boring distance of cutting tools installed on a different radius is not equal. The cutting radial line of tunneling interface is a polyline and its height is determined by phase angle and penetration of cutting tools. Both phase difference and the installation radius between adjacent disc cutters have little effect on the vertical force and rolling force, but increase with the increase in cutter spacing. In addition, when increasing phase difference and cutter space bilaterally, and reducing installation radius simultaneously, the lateral force would be improved. Related results have been verified onl O0 t rotary tool cutting test platform.
文摘A mathematic model is established using infinitesimal geometry for the cutting edge design of special milling cutters which use equal lead helix as cutting edges; equations are given for front-end and proclitic surface of revolution of ball pillar milling cutters, ball taper milling cutters and angularly conical milling cutters; and corresponding models are established for the continuity cutting edge curves of milling cutters. Typical examples are given to illustrate the applications of mathematic models, which prove the correctness and applicability of these geometric models.
文摘Being one of their prominent exploitative characteristics, cutting tools durability depends on the character, intensity and the speed of wearing. Identification of tool wearing is of great significance for the purpose of avoiding sooner or later replacement of tools. The parameters of tool wearing can be measured by out-process and in-process-measuring systems. Given the extremely limiting role of the former in modern production lines, development of the latter （the indirect measuring systems） has gained prominence, The basis of indirect measuring systems comprises a set of various signals originating from the units of the system under treatment which stand in certain correlations with the wearing parameters. The paper presents mathematical models of axial force designed on the basis of experimental research in drilling tempered steel by twist drills made of high-speed steel manufactured by powder metallurgy.
文摘As to probe the factors affecting the roughness and surface properties of work piece in mirco-cutting machining process, according to the principle of energy balance, using the method of experiments combining with theoretical analysis, this paper investigates the effect of cutting edge radius on the unit cutting force, the cutting component forces ratio Fy/Fz, as well as the roughness and surface properties of the work-piece. Experimental results show that the value of tool cutting edge arc ρ has a significant impact on elastic-plastic deformation of the cutting area, and its influence on the surface quality of processing and precision is greater than common cutting. The method of calculating the theoretical limits of the diamond tool cutting edge radius is feasible. The value of 0.0001 μm has some guiding significance for the developement of suitable cutting thickness to ensure the normal cutting.
文摘Quantitative measurement of the cutter blade sharpness is yet a difficult problem, since so far there has been no appropriate testing method. In this paper, a technique is introduced for measuring the cutter blade sharpness at different testing conditions. The sharpness of cutter blades are measured by detecting the force to cut off the fiber with a material strength testing machine, and the results indicated that the technique could be used to measure the cutter blade sharpness satisfactorily. The fiber tension and downward speed of cutter blades are recommended to be 4.9 cN and 50 mm/min respectively for cutting 0.22 mm PET fiber.
文摘Mar-M247 is a nickel-based alloy which is well known as difficult-to-machine material due to its characteristics of high strength, poor thermal diffusion and work hardening. Calculation of shear stress by an analytical force model to indicate the effect of coating material, cutting speed, feed rate on tool life and surface roughness was conducted experimentally. Cutting tests were performed using round inserts, with cutting speeds ranging from 50 to 300 rn/min, and feed rates from 0.1 to 0.4 mm/tooth, without using cooling liquids. The behavior of the TiN and TiCN layers using various cutting conditions was analyzed with orthogonal machining force model. Cutting results indicate that different coated tools, together with cutting variables, play a significant role in determining the machinability when milling Mar-M247.
