Based on the concept of stiffness degradation, a damage index of the whole frame and the storey is proposed for the frame seismic performance evaluation. The index is compatible with the non-linear static analysis （e...Based on the concept of stiffness degradation, a damage index of the whole frame and the storey is proposed for the frame seismic performance evaluation. The index is compatible with the non-linear static analysis （e. g. the pushover analysis）, and the structural damage is considered via plastic hinges. Simultaneously, a practical approach is developed to obtain the relationships between the proposed index and earthquake intensities based on the capacity spectrum method. The proposed index is then illustrated through two low-rise reinforced concrete frames, and it is also compared with some other indices. The results indicate that the proposed index is on the safe side and not sensitive to the lateral load pattern. The storey index is helpful to reflect the storey damage and to uncover the position of the weak storey. Finally, the relationship between performance levels and damage index values is also proposed through statistical analysis for the performance-based seismic evaluation.展开更多
The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stif...The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stiffness of joint system, which is neither total pin assumption nor perfect fix condition, is very important to apply to the real single layer space one. Therefore, the purpose of this work was to investigate the buckling behavior of single layer space structure, using the development of the upgraded stiffness matrix for the joint rigidity. To derive tangential stiffness matrix, a displacement function was assumed using translational and rotational displacement at the node. The geometrical nonlinear analysis was simulated not only with perfect model but also with imperfect one. As a result, the one and two free nodal numerical models were investigated using derived stiffness matrix. It was figured out that the buckling load increases in proportion to joint rigidity with rise-span ratio. The stability of numerical model is very sensitive with the initial imperfection, responding of bifurcation in the structure.展开更多
A convenient approach is proposed for analyzing the ultimate load carrying capacity of concrete filled steel tubular (CFST) arch bridge with stiffening girders. A fiber model beam element is specially used to simulate...A convenient approach is proposed for analyzing the ultimate load carrying capacity of concrete filled steel tubular (CFST) arch bridge with stiffening girders. A fiber model beam element is specially used to simulate the stiffening girder and CFST arch rib. The geometric nonlinearity, material nonlinearity, influence of the construction process and the contribution of prestressing reinforcement are all taken into consideration. The accuracy of this method is validated by comparing its results with experimental results. Finally, the ultimate strength of an abnormal CFST arch bridge with stiffening girders is investigated and the effect of construction method is discussed. It is concluded that the construction process has little effect on the ultimate strength of the bridge.展开更多
The purpose of this paper is to present a design procedure for subsea rigid jumper system including strength and fatigue analysis. Special attention gives to a methodology based on DNV-RP-F105 to evaluate jumper fatig...The purpose of this paper is to present a design procedure for subsea rigid jumper system including strength and fatigue analysis. Special attention gives to a methodology based on DNV-RP-F105 to evaluate jumper fatigue damage caused by vortex induced vibration (VIV). Jumper strength analysis is to determine the jumper con-figuration which can accommodate various load conditions and all possible span lengths driven by installation tole-rances of connected subsea structures. Fatigue analysis includes two parts:thermal fatigue and VIV fatigue. This paper presents the procedure of VIV fatigue damage calculation. An example is given to illustrate above methodologies.展开更多
A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. ...A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. The initial hanger tensions are first obtained through an iterative analysis by combining the girder-tower-only finite element(FE) model with the analytical program for shape finding of the spatial cable system. These initial hanger tensions, together with the corresponding cable coordinates and internal forces, are then included into the FE model of the total bridge system, the nonlinear analysis of which involves the optimization technique. Calculations are repeated until the optimization algorithm converges to the most optimal hanger tensions(i.e. the desired reasonable finished bridge state). The "temperature rigid arm" is introduced to offset the unavoidable initial deformations of the girder and tower, which are due to the huge axial forces originated from the main cable. Moreover, by changing the stiffness coefficient K in the girder-tower-only FE model, the stiffness proportion of the main girder, the tower or the cable subsystem in the whole structural system could be adjusted according to the design intentions. The effectiveness of the proposed method is examined and demonstrated by one simple tutorial example and one self-anchored suspension bridge.展开更多
With the development of deepwater oil and gas exploration, Steel Catenary Risers(SCRs) become preferred risers for resource production, import and export. Vortex induced vibration(VIV) is the key problem encountered i...With the development of deepwater oil and gas exploration, Steel Catenary Risers(SCRs) become preferred risers for resource production, import and export. Vortex induced vibration(VIV) is the key problem encountered in the design of SCRs. In this study, a new model, the rigid swing model, is proposed based on the consideration of large curvature of SCRs. The sag bend of SCRs is assumed as a rigid swing system around the axis from the hanging point to the touch down point(TDP) in the model. The torque, produced by the lift force and the swing vector, provides the driving torque for the swing system, and the weight of SCRs provides the restoring torque. The simulated response of rigid swing is coupled with bending vibration, and then the coupling VIV model of SCRs is studied in consideration of bending vibration and rigid motion. The calculated results indicate that the rigid swing has a magnitude equal to that of bending vibration, and the rigid motion affects the dynamic response of SCRs and can not be neglected in the VIV analysis.展开更多
A rigid central buckle is employed in Runyang Suspension Bridge （RSB） to replace commonly used short suspenders in the main span. Based on the seismic waves with 2% probabilities of exceedance, the nonlinear seismic...A rigid central buckle is employed in Runyang Suspension Bridge （RSB） to replace commonly used short suspenders in the main span. Based on the seismic waves with 2% probabilities of exceedance, the nonlinear seismic response time-domain analysis are then conducted and influence of central buckles on seismic response of long-span suspension bridge is specially studied. Analysis resuits show that the central buckle can effectively control the longitudinal floating vibration mode of the deck, and therefore reduce earthquake-excited longitudinal displacement at the end of the deck. However, the central buckle may cause increment of longitudinal displacement at the top of main tower and bending moment at the bottom of the main tower, which should be paid special attention to. Results provide references for anti-earthquake analysis and design of long-span suspension bridges using rigid central buckles.展开更多
基金The National Basic Research Program of China(973 Program)(No.2007CB714200)
文摘Based on the concept of stiffness degradation, a damage index of the whole frame and the storey is proposed for the frame seismic performance evaluation. The index is compatible with the non-linear static analysis （e. g. the pushover analysis）, and the structural damage is considered via plastic hinges. Simultaneously, a practical approach is developed to obtain the relationships between the proposed index and earthquake intensities based on the capacity spectrum method. The proposed index is then illustrated through two low-rise reinforced concrete frames, and it is also compared with some other indices. The results indicate that the proposed index is on the safe side and not sensitive to the lateral load pattern. The storey index is helpful to reflect the storey damage and to uncover the position of the weak storey. Finally, the relationship between performance levels and damage index values is also proposed through statistical analysis for the performance-based seismic evaluation.
基金Project(12 High-tech Urban C11) supported by High-tech Urban Development Program of Ministry of Land,Transport and Maritime Affairs,Korea
文摘The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stiffness of joint system, which is neither total pin assumption nor perfect fix condition, is very important to apply to the real single layer space one. Therefore, the purpose of this work was to investigate the buckling behavior of single layer space structure, using the development of the upgraded stiffness matrix for the joint rigidity. To derive tangential stiffness matrix, a displacement function was assumed using translational and rotational displacement at the node. The geometrical nonlinear analysis was simulated not only with perfect model but also with imperfect one. As a result, the one and two free nodal numerical models were investigated using derived stiffness matrix. It was figured out that the buckling load increases in proportion to joint rigidity with rise-span ratio. The stability of numerical model is very sensitive with the initial imperfection, responding of bifurcation in the structure.
文摘A convenient approach is proposed for analyzing the ultimate load carrying capacity of concrete filled steel tubular (CFST) arch bridge with stiffening girders. A fiber model beam element is specially used to simulate the stiffening girder and CFST arch rib. The geometric nonlinearity, material nonlinearity, influence of the construction process and the contribution of prestressing reinforcement are all taken into consideration. The accuracy of this method is validated by comparing its results with experimental results. Finally, the ultimate strength of an abnormal CFST arch bridge with stiffening girders is investigated and the effect of construction method is discussed. It is concluded that the construction process has little effect on the ultimate strength of the bridge.
文摘The purpose of this paper is to present a design procedure for subsea rigid jumper system including strength and fatigue analysis. Special attention gives to a methodology based on DNV-RP-F105 to evaluate jumper fatigue damage caused by vortex induced vibration (VIV). Jumper strength analysis is to determine the jumper con-figuration which can accommodate various load conditions and all possible span lengths driven by installation tole-rances of connected subsea structures. Fatigue analysis includes two parts:thermal fatigue and VIV fatigue. This paper presents the procedure of VIV fatigue damage calculation. An example is given to illustrate above methodologies.
基金Project(20133204120015) supported by Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject(12KJB560003) supported by the Natural Science Foundation of the Higher Education Institution of Jiangsu Province,China
文摘A systematic and generic procedure for the determination of the reasonable finished state of self-anchored suspension bridges is proposed, the realization of which is mainly through adjustment of the hanger tensions. The initial hanger tensions are first obtained through an iterative analysis by combining the girder-tower-only finite element(FE) model with the analytical program for shape finding of the spatial cable system. These initial hanger tensions, together with the corresponding cable coordinates and internal forces, are then included into the FE model of the total bridge system, the nonlinear analysis of which involves the optimization technique. Calculations are repeated until the optimization algorithm converges to the most optimal hanger tensions(i.e. the desired reasonable finished bridge state). The "temperature rigid arm" is introduced to offset the unavoidable initial deformations of the girder and tower, which are due to the huge axial forces originated from the main cable. Moreover, by changing the stiffness coefficient K in the girder-tower-only FE model, the stiffness proportion of the main girder, the tower or the cable subsystem in the whole structural system could be adjusted according to the design intentions. The effectiveness of the proposed method is examined and demonstrated by one simple tutorial example and one self-anchored suspension bridge.
基金funded by the National Natural Science Foundation of China(51079136,51179179,51239008)
文摘With the development of deepwater oil and gas exploration, Steel Catenary Risers(SCRs) become preferred risers for resource production, import and export. Vortex induced vibration(VIV) is the key problem encountered in the design of SCRs. In this study, a new model, the rigid swing model, is proposed based on the consideration of large curvature of SCRs. The sag bend of SCRs is assumed as a rigid swing system around the axis from the hanging point to the touch down point(TDP) in the model. The torque, produced by the lift force and the swing vector, provides the driving torque for the swing system, and the weight of SCRs provides the restoring torque. The simulated response of rigid swing is coupled with bending vibration, and then the coupling VIV model of SCRs is studied in consideration of bending vibration and rigid motion. The calculated results indicate that the rigid swing has a magnitude equal to that of bending vibration, and the rigid motion affects the dynamic response of SCRs and can not be neglected in the VIV analysis.
文摘A rigid central buckle is employed in Runyang Suspension Bridge （RSB） to replace commonly used short suspenders in the main span. Based on the seismic waves with 2% probabilities of exceedance, the nonlinear seismic response time-domain analysis are then conducted and influence of central buckles on seismic response of long-span suspension bridge is specially studied. Analysis resuits show that the central buckle can effectively control the longitudinal floating vibration mode of the deck, and therefore reduce earthquake-excited longitudinal displacement at the end of the deck. However, the central buckle may cause increment of longitudinal displacement at the top of main tower and bending moment at the bottom of the main tower, which should be paid special attention to. Results provide references for anti-earthquake analysis and design of long-span suspension bridges using rigid central buckles.
