Combining wavelet transforms with conventional log differential curves is used to identify fractured sections is a new idea.In this paper,we first compute the mother wavelet transform of conventional logs and the wave...Combining wavelet transforms with conventional log differential curves is used to identify fractured sections is a new idea.In this paper,we first compute the mother wavelet transform of conventional logs and the wavelet decomposed signals are compared with fractures identified from image logs to determine the fracture-matched mother wavelet.Then the mother wavelet-based decomposed signal combined with the differential curves of conventional well logs create a fracture indicator curve,identifying the fractured zone.Finally the fracture density can be precisely evaluated by the linear relationship of the indicator curve and image log fracture density.This method has been successfully used to evaluate igneous reservoir fractures in the southern Songnan basin and the calculated density from the indicator curve and density from image logs are both basically consistent.展开更多
A new method, triplet circular Hough transform, is proposed for circle detection in image processing and pattern recognition. In the method, a curve in an image is first detected. Next, a sequence of three points on t...A new method, triplet circular Hough transform, is proposed for circle detection in image processing and pattern recognition. In the method, a curve in an image is first detected. Next, a sequence of three points on the curve are selected, a sequence of parameters (a,b,r) corresponding to the three points are calculated by solving the circle equation of the curve, and two 2-D accumulators A(a,b) and R(a,b) are accumulated with 1 and r, respectively. Then the parameters {(a, b, r)} of the circles fitting the curve are determined from A(a,b) and R(a,b) by searching for the local maximum over A(a,b). Because no computation loops over center (a, 6) and/or radius r are needed, the method is faster than the basic and directional gradient methods. It needs also much smaller memory for accumulation.展开更多
Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis o...Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.展开更多
This paper presented a new-type CNC curve grinding machine, in order to conquer the disadvantages of conventional NC curve grinding machine and improve surface quality, dimensional accuracy and machining efficiency. T...This paper presented a new-type CNC curve grinding machine, in order to conquer the disadvantages of conventional NC curve grinding machine and improve surface quality, dimensional accuracy and machining efficiency. The new-type grinder adopts some high and new technologies: ① the normal tracing device could make grinding wheel coincide with the normal direction of the machining points in work piece, and improve surface quality and dimensional accuracy; ② the digital image on-line recognition system could monitor machining process and compensate wheel wear in real time; ③ linear motor drive mechanism could realize the exact adjustment of the grinding head digitally and increase the machining efficiency. The math models of normal tracing and circular tolerance zone were presented. The experimental results show that the new-type CNC curve grinding machine equipped with the three devices mentioned above is easy to realize the precision grinding of any complex curve, and improve surface quality, dimensional accuracy and machining efficiency.展开更多
We consider the class of parametric curves that can be represented by combination of control points and basis func- tions. A control point is let vary while the rest is held fixed. It’s shown that the locus of the mo...We consider the class of parametric curves that can be represented by combination of control points and basis func- tions. A control point is let vary while the rest is held fixed. It’s shown that the locus of the moving control point that yields points of zero torsion is the osculating plane of the corresponding discriminant curve at its point of the same parameter value. The special case is studied when the basis functions sum to one.展开更多
A discriminant method for optimizing activity in nuclear medicine studies is validated by comparison with ROC （received operating characteristic）-curves. The method is tested in 21 single photon emission computerize...A discriminant method for optimizing activity in nuclear medicine studies is validated by comparison with ROC （received operating characteristic）-curves. The method is tested in 21 single photon emission computerized tomography （SPECT）, performed with a cardiac phantom. Three different lesions （Lb L2 and L3） were placed in the myocardium-wall by pairs fbr each SPECT. Three activities （84, 37 or 18.5 MBq） of 99mTc were used as background. Linear discriminant analysis was used to select the parameters that characterize image quality among the measured variables in the images [（Background-to-Lesion （B/Li） and Signal-to-Noise （S/N） ratios）]. Two clusters with different image quality （P=0.021 ） were obtained. The ratios B/Lj, B/L2 and B/L3 are the parameters used to construct the function with 100% of cases correctly classified into the clusters. The value of 37 MBq was the lowest tested activity for which good results for the B/Li ratios were obtained. The result coincides with the applied ROC-analysis （r=0.89）.展开更多
In this paper, we present two explicit invalid-curve attacks on the genus 2 hyperelliptic curve over a finite field. First, we propose two explicit attack models by injecting a one-bit fault in a given divisor. Then, ...In this paper, we present two explicit invalid-curve attacks on the genus 2 hyperelliptic curve over a finite field. First, we propose two explicit attack models by injecting a one-bit fault in a given divisor. Then, we discuss the construction of an invalid curve based on the faulted divisor. Our attacks are based on the fact that the Hyperelliptic Curve Scalar Multiplication (HECSM) algorithm does not utilize the curve parameters and We consider three hyperelliptic curves as the attack targets. For curve with security level 186 (in bits), our attack method can get the weakest invalid curve with security level 42 (in bits); there are 93 invalid curves with security level less than 50. We also estimate the theoretical probability of getting a weak hyperelliptic curve whose cardinality is a smooth integer. Finally, we show that the complexity of the fault attack is subexponential if the attacker can freely inject a fault in the input divisor. Cryptosystems based on the genus 2 hyperelliptic curves cannot work against our attack algorithm in practice.展开更多
In order to establish a fast and effective high-throughput method for identifying maize resistance to Aspergillus flavus infection in the field,5 conidial concentrations and 3 inoculation methods were compared and opt...In order to establish a fast and effective high-throughput method for identifying maize resistance to Aspergillus flavus infection in the field,5 conidial concentrations and 3 inoculation methods were compared and optimized. A correlation model between disease levels and aflatoxin B1 accumulation was established. The results showed that inoculating maize inbred lines with the optimal conidial concentration of 1.0×10^6 c/mL could accurately show the different resistance levels of maize to A.flavus infection,and the spiral quantitative inoculation technique could effectively avoid the defect of calculation error caused by commonly used methods. The positive correlation model of resistance level and aflatoxin B1 accumulation could effectively predict the capability of maize being resistant to A.flavus. 8 resistant and 9 medium resistant maize inbred lines of the RIL population were identified.The spiral quantitative identification method realized the high-throughput identification of maize inbred lines resistant to A.flavus infection in the field,and the results have shown high accuracy,stability and repeatability.展开更多
This paper presents a novel bootstrap based method for Receiver Operating Characteristic (ROC) analysis of Fisher classifier. By defining Fisher classifier’s output as a statistic, the bootstrap technique is used to ...This paper presents a novel bootstrap based method for Receiver Operating Characteristic (ROC) analysis of Fisher classifier. By defining Fisher classifier’s output as a statistic, the bootstrap technique is used to obtain the sampling distributions of the outputs for the positive class and the negative class respectively. As a result, the ROC curve is a plot of all the (False Positive Rate (FPR), True Positive Rate (TPR)) pairs by varying the decision threshold over the whole range of the boot- strap sampling distributions. The advantage of this method is, the bootstrap based ROC curves are much stable than those of the holdout or cross-validation, indicating a more stable ROC analysis of Fisher classifier. Experiments on five data sets publicly available demonstrate the effectiveness of the proposed method.展开更多
In this paper,a deterministic theorem is proposed for quadratic rotational curved surface.The relationship between invariants for quadratic rotational curved surface is established.In addition we give each type of equ...In this paper,a deterministic theorem is proposed for quadratic rotational curved surface.The relationship between invariants for quadratic rotational curved surface is established.In addition we give each type of equitions for rotational curved surface using the invariant.展开更多
基金sponsored by National Science and Technology Major Project of China (No. 2008 ZX 05009-001)
文摘Combining wavelet transforms with conventional log differential curves is used to identify fractured sections is a new idea.In this paper,we first compute the mother wavelet transform of conventional logs and the wavelet decomposed signals are compared with fractures identified from image logs to determine the fracture-matched mother wavelet.Then the mother wavelet-based decomposed signal combined with the differential curves of conventional well logs create a fracture indicator curve,identifying the fractured zone.Finally the fracture density can be precisely evaluated by the linear relationship of the indicator curve and image log fracture density.This method has been successfully used to evaluate igneous reservoir fractures in the southern Songnan basin and the calculated density from the indicator curve and density from image logs are both basically consistent.
基金Supported by the National Natural Science Foundation of China(No.30070228)
文摘A new method, triplet circular Hough transform, is proposed for circle detection in image processing and pattern recognition. In the method, a curve in an image is first detected. Next, a sequence of three points on the curve are selected, a sequence of parameters (a,b,r) corresponding to the three points are calculated by solving the circle equation of the curve, and two 2-D accumulators A(a,b) and R(a,b) are accumulated with 1 and r, respectively. Then the parameters {(a, b, r)} of the circles fitting the curve are determined from A(a,b) and R(a,b) by searching for the local maximum over A(a,b). Because no computation loops over center (a, 6) and/or radius r are needed, the method is faster than the basic and directional gradient methods. It needs also much smaller memory for accumulation.
基金Supported by the National Natural Science Foundation of China(50375026)the National Basic Research Program of China(2005cb221500)+1 种基金the National Key Technology R&D Program(2006BAK03B01)the National Natural Science Foundation Key Program(50534080)
文摘Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.
基金Shanghai Science and Technology Foundation of China (No.021111125)
文摘This paper presented a new-type CNC curve grinding machine, in order to conquer the disadvantages of conventional NC curve grinding machine and improve surface quality, dimensional accuracy and machining efficiency. The new-type grinder adopts some high and new technologies: ① the normal tracing device could make grinding wheel coincide with the normal direction of the machining points in work piece, and improve surface quality and dimensional accuracy; ② the digital image on-line recognition system could monitor machining process and compensate wheel wear in real time; ③ linear motor drive mechanism could realize the exact adjustment of the grinding head digitally and increase the machining efficiency. The math models of normal tracing and circular tolerance zone were presented. The experimental results show that the new-type CNC curve grinding machine equipped with the three devices mentioned above is easy to realize the precision grinding of any complex curve, and improve surface quality, dimensional accuracy and machining efficiency.
基金Project (No. OTKA T 048523) supported by the Hungarian ScientificResearch Fund
文摘We consider the class of parametric curves that can be represented by combination of control points and basis func- tions. A control point is let vary while the rest is held fixed. It’s shown that the locus of the moving control point that yields points of zero torsion is the osculating plane of the corresponding discriminant curve at its point of the same parameter value. The special case is studied when the basis functions sum to one.
基金Project supported by the Third World Academy of Sciences (TWAS), Cuba
文摘A discriminant method for optimizing activity in nuclear medicine studies is validated by comparison with ROC （received operating characteristic）-curves. The method is tested in 21 single photon emission computerized tomography （SPECT）, performed with a cardiac phantom. Three different lesions （Lb L2 and L3） were placed in the myocardium-wall by pairs fbr each SPECT. Three activities （84, 37 or 18.5 MBq） of 99mTc were used as background. Linear discriminant analysis was used to select the parameters that characterize image quality among the measured variables in the images [（Background-to-Lesion （B/Li） and Signal-to-Noise （S/N） ratios）]. Two clusters with different image quality （P=0.021 ） were obtained. The ratios B/Lj, B/L2 and B/L3 are the parameters used to construct the function with 100% of cases correctly classified into the clusters. The value of 37 MBq was the lowest tested activity for which good results for the B/Li ratios were obtained. The result coincides with the applied ROC-analysis （r=0.89）.
基金supported by the National Basic Research Program （973 Program）under Grant No.2013CB834205 the National Natural Science Foundation of China under Grant No.61272035 the Independent Innovation Foundation of Shandong University under Grant No.2012JC020
文摘In this paper, we present two explicit invalid-curve attacks on the genus 2 hyperelliptic curve over a finite field. First, we propose two explicit attack models by injecting a one-bit fault in a given divisor. Then, we discuss the construction of an invalid curve based on the faulted divisor. Our attacks are based on the fact that the Hyperelliptic Curve Scalar Multiplication (HECSM) algorithm does not utilize the curve parameters and We consider three hyperelliptic curves as the attack targets. For curve with security level 186 (in bits), our attack method can get the weakest invalid curve with security level 42 (in bits); there are 93 invalid curves with security level less than 50. We also estimate the theoretical probability of getting a weak hyperelliptic curve whose cardinality is a smooth integer. Finally, we show that the complexity of the fault attack is subexponential if the attacker can freely inject a fault in the input divisor. Cryptosystems based on the genus 2 hyperelliptic curves cannot work against our attack algorithm in practice.
文摘In order to establish a fast and effective high-throughput method for identifying maize resistance to Aspergillus flavus infection in the field,5 conidial concentrations and 3 inoculation methods were compared and optimized. A correlation model between disease levels and aflatoxin B1 accumulation was established. The results showed that inoculating maize inbred lines with the optimal conidial concentration of 1.0×10^6 c/mL could accurately show the different resistance levels of maize to A.flavus infection,and the spiral quantitative inoculation technique could effectively avoid the defect of calculation error caused by commonly used methods. The positive correlation model of resistance level and aflatoxin B1 accumulation could effectively predict the capability of maize being resistant to A.flavus. 8 resistant and 9 medium resistant maize inbred lines of the RIL population were identified.The spiral quantitative identification method realized the high-throughput identification of maize inbred lines resistant to A.flavus infection in the field,and the results have shown high accuracy,stability and repeatability.
基金the Natural Science Foundation of Zhejiang Province of China (No. Y104540)the Foundation of the Key Laboratory of Advanced Information Science and Network Technology of Beijing, China (No.TDXX0509).
文摘This paper presents a novel bootstrap based method for Receiver Operating Characteristic (ROC) analysis of Fisher classifier. By defining Fisher classifier’s output as a statistic, the bootstrap technique is used to obtain the sampling distributions of the outputs for the positive class and the negative class respectively. As a result, the ROC curve is a plot of all the (False Positive Rate (FPR), True Positive Rate (TPR)) pairs by varying the decision threshold over the whole range of the boot- strap sampling distributions. The advantage of this method is, the bootstrap based ROC curves are much stable than those of the holdout or cross-validation, indicating a more stable ROC analysis of Fisher classifier. Experiments on five data sets publicly available demonstrate the effectiveness of the proposed method.
文摘In this paper,a deterministic theorem is proposed for quadratic rotational curved surface.The relationship between invariants for quadratic rotational curved surface is established.In addition we give each type of equitions for rotational curved surface using the invariant.
