The lattice parameters, bulk modulus, phase transition pressure, and temperature dependencies of the elastic constants cij of CdSe are investigated by using the Cambridge Serial Total Energy Package （CASTEP） program...The lattice parameters, bulk modulus, phase transition pressure, and temperature dependencies of the elastic constants cij of CdSe are investigated by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of Density Functional Theory （DFT）. It is found that the phase transitions from the ZB structure to the RS structure and from WZ structure to RS structure are 2.2 GPa and 2.8 GPa, respectively. Our results agree well with the available experimental data and other theoretical results. The aggregate elastic modulus （B, G, E, A ）, the Poisson＇s ratio （v）, the Griuneisen parameter （γ）, the Debye temperature θD on pressure and temperature are also successfully obtained.展开更多
Functionally graded Al/B_4C, Al/Si C, Al/Al_2O_3 and Al/TiB_2 composites with constant 12%(mass fraction) of reinforcement were fabricated by centrifugal casting and hollow cylindrical components were obtained. Micros...Functionally graded Al/B_4C, Al/Si C, Al/Al_2O_3 and Al/TiB_2 composites with constant 12%(mass fraction) of reinforcement were fabricated by centrifugal casting and hollow cylindrical components were obtained. Microstructural characteristics were investigated at outer surface of all composites and segregation of reinforcement particles was observed. Graded property of the composites with different reinforcements was investigated through hardness and tensile measurements. Results revealed that the outer peripheries of all composites exhibit higher hardness except in Al/B_4C composite and the outer zones of all composites show higher tensile strength. Abrasive wear test was conducted on the outer peripheries of all composites and Al/TiB_2 composite exhibits less wear rate.展开更多
The axisymmetric thermoelastic problem of a uniformly heated, functionally graded isotropic hollow cylinder is considered. An analytical form of solution is proposed. For the case when the Young's modulus and ther...The axisymmetric thermoelastic problem of a uniformly heated, functionally graded isotropic hollow cylinder is considered. An analytical form of solution is proposed. For the case when the Young's modulus and thermal expansion coefficient have a power\|law dependence on the radial coordinate, explicit exact solution is obtained. For the degenerated case, i.e. when the cylinder is homogeneous and isotropic, no stresses will occur provided it is subjected to a uniform temperature. Numerical results are finally given and some important inclusions are obtained.展开更多
In this work, laser heat conduction lap welding(LHCLW) of AZ31B magnesium alloy sheet and DP780galvanized steel sheet was carried out by the defocused laser beam. The effects of laser power on the microstructure and m...In this work, laser heat conduction lap welding(LHCLW) of AZ31B magnesium alloy sheet and DP780galvanized steel sheet was carried out by the defocused laser beam. The effects of laser power on the microstructure and mechanical properties of the joint were studied. The pros and cons of the joint were identified and evaluated by measuring the tensile shear strength, microhardness and microstructure observation. The formation mechanism of various phases at the Mg/steel interface was analyzed. The results indicated that the galvanized layer could promote the metallurgical bonding between magnesium alloy and steel by improving the diffusion ability of molten magnesium alloy at the steel interface and reacting with Mg, so as to enhance the strength of the joint. A continuous dense layered eutectic structure(α-Mg+MgZn) was formed at the interface of the joint, while MgZn_(2)and MgZn phase was formed at the weld edge zone and heat affective zone(HAZ), whereas no reaction layer was generated between the uncoated steel and magnesium alloy. A sound joint could be obtained at 2.5 kW, and the corresponding tensile shear strength reached the maximum value of 42.9 N/mm. The strength was slightly reduced at 2.6 kW due to the existence of microcracks in the eutectic reaction layer.展开更多
OBJECTIVE: To explore the concept and norm of fracture healing with osteopathy in traditional Mongolian medicine (TMM). METHODS: Based on the correspondence between man and the universe (including psychosomatic integr...OBJECTIVE: To explore the concept and norm of fracture healing with osteopathy in traditional Mongolian medicine (TMM). METHODS: Based on the correspondence between man and the universe (including psychosomatic integration) in fracture healing with osteopathy in TMM, we used modern physio-psychological and biomechanical principles and methods to probe the integrated, dynamic and functional characteristics of fracture healing. RESULTS: Based on the integration of limbs and the body, unification of the body and function and harmony of man and nature (including psychoso-matic integration), fracture healing with osteopathy in TMM comprises the concept of natural functional healing of fractures, and follows the norm of considering physiological healing and psychological function as well as limb healing and motor function. CONCLUSION: Fracture healing with osteopathy in TMM is characterized by a lack of trauma without future complications. This therapy makes the concept of fracture healing develop in the direction of humanity, behaviorism and integration.展开更多
As an important life support treatment, mechanical ventilation is usually adopted in clinics. With the development of the res-piratory diagnostic and treatment technologies, air flow dynamics of mechanical ventilation...As an important life support treatment, mechanical ventilation is usually adopted in clinics. With the development of the res-piratory diagnostic and treatment technologies, air flow dynamics of mechanical ventilation is usually referenced in the evaluation of pulmonary status and assessment of respiratory therapy. In order to improve the ventilation efficiency and provide a reference for pulmonary diagnostics, in this paper, a new mathematical model of mechanical ventilation system was set up. Furthermore, a prototype mechanical ventilation system for an artificial simulating lung was designed and experimentally studied. Lastly, in order to improve the ventilation efficiency and provide a reference for pulmonary diagnostics, the air flow dynamics of the mechanical ventilation system was illustrated through simulation and experimental studies. The study can be helpful to the optimization of the mechanical ventilation system.展开更多
We elucidate here the process-structure-property relationships in three-dimensional（3 D） implantable titanium alloy biomaterials processed by electron beam melting（EBM） that is based on the principle of additive m...We elucidate here the process-structure-property relationships in three-dimensional（3 D） implantable titanium alloy biomaterials processed by electron beam melting（EBM） that is based on the principle of additive manufacturing. The conventional methods for processing of biomedical devices including freeze casting and sintering are limited because of the difficulties in adaptation at the host site and difference in the micro/macrostructure, mechanical, and physical properties with the host tissue. In this regard, EBM has a unique advantage of processing patient-specific complex designs, which can be either obtained from the computed tomography（CT） scan of the defect site or through a computeraided design（CAD） program. This review introduces and summarizes the evolution and underlying reasons that have motivated 3 D printing of scaffolds for tissue regeneration.The overview comprises of two parts for obtaining ultimate functionalities. The first part focuses on obtaining the ultimate functionalities in terms of mechanical properties of 3 D titanium alloy scaffolds fabricated by EBM with different characteristics based on design, unit cell, processing parameters, scan speed, porosity, and heat treatment. The second part focuses on the advancement of enhancing biological responses of these 3 D scaffolds and the influence of surface modification on cell-material interactions. The overview concludes with a discussion on the clinical trials of these 3 D porous scaffolds illustrating their potential in meeting the current needs of the biomedical industry.展开更多
In this paper, we investigate the dynamics of a diffusive predator prey model with Holling-II functional response and the additive Allee effect in prey. We show the local and global asymptotical stability of the posit...In this paper, we investigate the dynamics of a diffusive predator prey model with Holling-II functional response and the additive Allee effect in prey. We show the local and global asymptotical stability of the positive equilibrium, and give the conditions of the existence of the Hopf bifurcation. By carrying out global qualitative and bifurcation analysis, it is shown that the weak and strong Allee effects in prey can induce different dynamical behavior in the predator-prey model. Furthermore, we use some numerical simulations to illustrate the dynamics of the model. The results may be helpful for controlling and managing the predator-prey system.展开更多
Objective： The use of fibrin adhesives has a broad background in nerve repair. Currently the suboptimal physical properties of singledonor fibrin adhesives have restricted their usage. The present experiment studies ...Objective： The use of fibrin adhesives has a broad background in nerve repair. Currently the suboptimal physical properties of singledonor fibrin adhesives have restricted their usage. The present experiment studies the performance and physical characteristics of a modified fibrin glue prepared from single-donor human plasma in the repair of posterior tibial nerve of rat. Methods： Forty Wistar rats were divided into 5 groups; in the control group, tibial nerve was completely transected and no treatment was done, while in the four experimental groups the nerve stumps were reconnected by one suture, three sutures, one suture with fibrin glue and fibrin glue alone respectively. During 8 weeks of follow-up, Tibial Function Index was measured weekly and adhesive strength, inflammation and scar formation were assessed at the end of the study. Results： Nerve stumps dehiscence rate and adhesive strength were similar in all experimental groups and significantly differed from control group （P〈0.05）. By the end of the eighth follow-up week, functional recovery of one and three sutures groups were significantly higher than groups in which fibrin glue was used for repair （P〈0.05）. The amount of inflammation and scar tissue formation was similar among all groups. Conclusion： The study results show that the prepared single-donor fibrin adhesive has acceptable mechanical properties which could provide required adhesiveness and hold nerve stumps in the long term; yet, we acknowledge that more studies are needed to improve functional outcome ofsinszle donor fibrin adhesive repair.展开更多
To make clear the precise hemodynamic mechanism underlying the anti-atherogenesis benefit of enhanced external couterpulsation(EECP) treatment, and to investigate the proper role of some important hemodynamic factors ...To make clear the precise hemodynamic mechanism underlying the anti-atherogenesis benefit of enhanced external couterpulsation(EECP) treatment, and to investigate the proper role of some important hemodynamic factors during the atherosclerotic progress, a comprehensive study combining long-term animal experiment and numerical solving was conducted in this paper. An experimentally induced hypercholesterolemic porcine model was developed and the chronic EECP intervention was subjected. Basic hemodynamic measurement was performed in vivo, as well as the arterial endothelial samples were extracted for physiological examination. Meanwhile, a numerical model was introduced to solve the complex hemodynamic factors such as WSS and OSI. The results show that EECP treatment resulted in significant increase of the instant levels of arterial WSS, blood pressure, and OSI. During EECP treatment, the instant OSI level of the common carotid arteries over cardiac cycles raised to a mean value of 8.58 ×10-2±2.13 ×10-2. Meanwhile, the chronic intervention of EECP treatment significantly reduced the atherosclerotic lesions in abdominal aortas and the endothelial cellular adherence. The present study suggests that the unique blood flow pattern induced by EECP treatment and the augmentation of WSS level in cardiac cycles may be the most important hemodynamic mechanism that contribute to its anti-atherogenesis effect. And as one of the indices that cause great concern in current hemodynamic study, OSI may not play a key role during the initiation of atherosclerosis.展开更多
In this paper, we present a diffusive predator prey system with Beddington-DeAngelis funetionM response, where the prey species can disperse between the two patches, and there is competition between the two predators....In this paper, we present a diffusive predator prey system with Beddington-DeAngelis funetionM response, where the prey species can disperse between the two patches, and there is competition between the two predators. Sufficient conditions for the permanence and extinction of system are established based on the upper and lower solution meth- ods and comparison theory of differential equation. Furthermore, the global asymptotic stability of positive solutions is obtained by constructing a suitable Lyapunov function. By using the continuation theorem in coincidence degree theory, we show the periodicity of positive solutions. Finally, we illustrate global asymptotic stability of the model by a simulation figure.展开更多
In this paper, we study the dynamics of a diffusive modified Leslie-Cower model with the multiplicative Allee effect and Ba^zykin functional response. We give detailed study on the stability of equilibria. Non-existen...In this paper, we study the dynamics of a diffusive modified Leslie-Cower model with the multiplicative Allee effect and Ba^zykin functional response. We give detailed study on the stability of equilibria. Non-existence of non-constant positive steady state solutions are shown to identify the rage of parameters of spatial pattern formation. We also give the conditions of Turing instability and perform a series of numerical simulations and find that the model exhibits complex patterns.展开更多
基金National Natural Science Foundation of China under Grant No.10576020
文摘The lattice parameters, bulk modulus, phase transition pressure, and temperature dependencies of the elastic constants cij of CdSe are investigated by using the Cambridge Serial Total Energy Package （CASTEP） program in the frame of Density Functional Theory （DFT）. It is found that the phase transitions from the ZB structure to the RS structure and from WZ structure to RS structure are 2.2 GPa and 2.8 GPa, respectively. Our results agree well with the available experimental data and other theoretical results. The aggregate elastic modulus （B, G, E, A ）, the Poisson＇s ratio （v）, the Griuneisen parameter （γ）, the Debye temperature θD on pressure and temperature are also successfully obtained.
基金Department of Science and Technology (India) for the financial support (Grant No.SR/S3/MERC/0116/2012)
文摘Functionally graded Al/B_4C, Al/Si C, Al/Al_2O_3 and Al/TiB_2 composites with constant 12%(mass fraction) of reinforcement were fabricated by centrifugal casting and hollow cylindrical components were obtained. Microstructural characteristics were investigated at outer surface of all composites and segregation of reinforcement particles was observed. Graded property of the composites with different reinforcements was investigated through hardness and tensile measurements. Results revealed that the outer peripheries of all composites exhibit higher hardness except in Al/B_4C composite and the outer zones of all composites show higher tensile strength. Abrasive wear test was conducted on the outer peripheries of all composites and Al/TiB_2 composite exhibits less wear rate.
文摘The axisymmetric thermoelastic problem of a uniformly heated, functionally graded isotropic hollow cylinder is considered. An analytical form of solution is proposed. For the case when the Young's modulus and thermal expansion coefficient have a power\|law dependence on the radial coordinate, explicit exact solution is obtained. For the degenerated case, i.e. when the cylinder is homogeneous and isotropic, no stresses will occur provided it is subjected to a uniform temperature. Numerical results are finally given and some important inclusions are obtained.
基金Projects(51705219, 51905227) supported by the National Natural Science Foundation of ChinaProject(BK20200915) supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(19KJB460013) supported by the General University Science Research Project of Jiangsu Province,China。
文摘In this work, laser heat conduction lap welding(LHCLW) of AZ31B magnesium alloy sheet and DP780galvanized steel sheet was carried out by the defocused laser beam. The effects of laser power on the microstructure and mechanical properties of the joint were studied. The pros and cons of the joint were identified and evaluated by measuring the tensile shear strength, microhardness and microstructure observation. The formation mechanism of various phases at the Mg/steel interface was analyzed. The results indicated that the galvanized layer could promote the metallurgical bonding between magnesium alloy and steel by improving the diffusion ability of molten magnesium alloy at the steel interface and reacting with Mg, so as to enhance the strength of the joint. A continuous dense layered eutectic structure(α-Mg+MgZn) was formed at the interface of the joint, while MgZn_(2)and MgZn phase was formed at the weld edge zone and heat affective zone(HAZ), whereas no reaction layer was generated between the uncoated steel and magnesium alloy. A sound joint could be obtained at 2.5 kW, and the corresponding tensile shear strength reached the maximum value of 42.9 N/mm. The strength was slightly reduced at 2.6 kW due to the existence of microcracks in the eutectic reaction layer.
基金Supported by the Project of the 2009 State Natural Science Fund (No. 30960518)a Project of the 2012 State Natural Science Fund (No. 81260513)a Major Project of the Scitech Plan of the Inner Mongolian Autonomous Region(2010-2012)
文摘OBJECTIVE: To explore the concept and norm of fracture healing with osteopathy in traditional Mongolian medicine (TMM). METHODS: Based on the correspondence between man and the universe (including psychosomatic integration) in fracture healing with osteopathy in TMM, we used modern physio-psychological and biomechanical principles and methods to probe the integrated, dynamic and functional characteristics of fracture healing. RESULTS: Based on the integration of limbs and the body, unification of the body and function and harmony of man and nature (including psychoso-matic integration), fracture healing with osteopathy in TMM comprises the concept of natural functional healing of fractures, and follows the norm of considering physiological healing and psychological function as well as limb healing and motor function. CONCLUSION: Fracture healing with osteopathy in TMM is characterized by a lack of trauma without future complications. This therapy makes the concept of fracture healing develop in the direction of humanity, behaviorism and integration.
基金supported by the National Natural Science Foundation of China(Grant No.51575020)
文摘As an important life support treatment, mechanical ventilation is usually adopted in clinics. With the development of the res-piratory diagnostic and treatment technologies, air flow dynamics of mechanical ventilation is usually referenced in the evaluation of pulmonary status and assessment of respiratory therapy. In order to improve the ventilation efficiency and provide a reference for pulmonary diagnostics, in this paper, a new mathematical model of mechanical ventilation system was set up. Furthermore, a prototype mechanical ventilation system for an artificial simulating lung was designed and experimentally studied. Lastly, in order to improve the ventilation efficiency and provide a reference for pulmonary diagnostics, the air flow dynamics of the mechanical ventilation system was illustrated through simulation and experimental studies. The study can be helpful to the optimization of the mechanical ventilation system.
基金support from the Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Pasosupport of the Key Research Program of Frontier Science, CAS (QYZDJ-SSW-JSC031-02)
文摘We elucidate here the process-structure-property relationships in three-dimensional（3 D） implantable titanium alloy biomaterials processed by electron beam melting（EBM） that is based on the principle of additive manufacturing. The conventional methods for processing of biomedical devices including freeze casting and sintering are limited because of the difficulties in adaptation at the host site and difference in the micro/macrostructure, mechanical, and physical properties with the host tissue. In this regard, EBM has a unique advantage of processing patient-specific complex designs, which can be either obtained from the computed tomography（CT） scan of the defect site or through a computeraided design（CAD） program. This review introduces and summarizes the evolution and underlying reasons that have motivated 3 D printing of scaffolds for tissue regeneration.The overview comprises of two parts for obtaining ultimate functionalities. The first part focuses on obtaining the ultimate functionalities in terms of mechanical properties of 3 D titanium alloy scaffolds fabricated by EBM with different characteristics based on design, unit cell, processing parameters, scan speed, porosity, and heat treatment. The second part focuses on the advancement of enhancing biological responses of these 3 D scaffolds and the influence of surface modification on cell-material interactions. The overview concludes with a discussion on the clinical trials of these 3 D porous scaffolds illustrating their potential in meeting the current needs of the biomedical industry.
文摘In this paper, we investigate the dynamics of a diffusive predator prey model with Holling-II functional response and the additive Allee effect in prey. We show the local and global asymptotical stability of the positive equilibrium, and give the conditions of the existence of the Hopf bifurcation. By carrying out global qualitative and bifurcation analysis, it is shown that the weak and strong Allee effects in prey can induce different dynamical behavior in the predator-prey model. Furthermore, we use some numerical simulations to illustrate the dynamics of the model. The results may be helpful for controlling and managing the predator-prey system.
文摘Objective： The use of fibrin adhesives has a broad background in nerve repair. Currently the suboptimal physical properties of singledonor fibrin adhesives have restricted their usage. The present experiment studies the performance and physical characteristics of a modified fibrin glue prepared from single-donor human plasma in the repair of posterior tibial nerve of rat. Methods： Forty Wistar rats were divided into 5 groups; in the control group, tibial nerve was completely transected and no treatment was done, while in the four experimental groups the nerve stumps were reconnected by one suture, three sutures, one suture with fibrin glue and fibrin glue alone respectively. During 8 weeks of follow-up, Tibial Function Index was measured weekly and adhesive strength, inflammation and scar formation were assessed at the end of the study. Results： Nerve stumps dehiscence rate and adhesive strength were similar in all experimental groups and significantly differed from control group （P〈0.05）. By the end of the eighth follow-up week, functional recovery of one and three sutures groups were significantly higher than groups in which fibrin glue was used for repair （P〈0.05）. The amount of inflammation and scar tissue formation was similar among all groups. Conclusion： The study results show that the prepared single-donor fibrin adhesive has acceptable mechanical properties which could provide required adhesiveness and hold nerve stumps in the long term; yet, we acknowledge that more studies are needed to improve functional outcome ofsinszle donor fibrin adhesive repair.
基金Key Clinical Project from the Ministry of Healthgrant number:25400+1 种基金National Natural Science Foundation of Chinagrant number:81170272
文摘To make clear the precise hemodynamic mechanism underlying the anti-atherogenesis benefit of enhanced external couterpulsation(EECP) treatment, and to investigate the proper role of some important hemodynamic factors during the atherosclerotic progress, a comprehensive study combining long-term animal experiment and numerical solving was conducted in this paper. An experimentally induced hypercholesterolemic porcine model was developed and the chronic EECP intervention was subjected. Basic hemodynamic measurement was performed in vivo, as well as the arterial endothelial samples were extracted for physiological examination. Meanwhile, a numerical model was introduced to solve the complex hemodynamic factors such as WSS and OSI. The results show that EECP treatment resulted in significant increase of the instant levels of arterial WSS, blood pressure, and OSI. During EECP treatment, the instant OSI level of the common carotid arteries over cardiac cycles raised to a mean value of 8.58 ×10-2±2.13 ×10-2. Meanwhile, the chronic intervention of EECP treatment significantly reduced the atherosclerotic lesions in abdominal aortas and the endothelial cellular adherence. The present study suggests that the unique blood flow pattern induced by EECP treatment and the augmentation of WSS level in cardiac cycles may be the most important hemodynamic mechanism that contribute to its anti-atherogenesis effect. And as one of the indices that cause great concern in current hemodynamic study, OSI may not play a key role during the initiation of atherosclerosis.
基金The authors are grateful to their classmates and teachers for comments and valuable suggestions. This work is supported by the National Natural Science Foundation of China （No. 70672103）.
文摘In this paper, we present a diffusive predator prey system with Beddington-DeAngelis funetionM response, where the prey species can disperse between the two patches, and there is competition between the two predators. Sufficient conditions for the permanence and extinction of system are established based on the upper and lower solution meth- ods and comparison theory of differential equation. Furthermore, the global asymptotic stability of positive solutions is obtained by constructing a suitable Lyapunov function. By using the continuation theorem in coincidence degree theory, we show the periodicity of positive solutions. Finally, we illustrate global asymptotic stability of the model by a simulation figure.
文摘In this paper, we study the dynamics of a diffusive modified Leslie-Cower model with the multiplicative Allee effect and Ba^zykin functional response. We give detailed study on the stability of equilibria. Non-existence of non-constant positive steady state solutions are shown to identify the rage of parameters of spatial pattern formation. We also give the conditions of Turing instability and perform a series of numerical simulations and find that the model exhibits complex patterns.
