Hydrogenation modification is one of the most important ways to produce high-quality petroleum resin. The col- orless C9 petroleum resin （CgPR） was obtained by two-stage catalytic hydrogenation over NiWS/？-A1203 ca...Hydrogenation modification is one of the most important ways to produce high-quality petroleum resin. The col- orless C9 petroleum resin （CgPR） was obtained by two-stage catalytic hydrogenation over NiWS/？-A1203 catalyst and PdRu/ y-A1203 catalyst connected in series. Via the hydrogenation reaction, aromatic rings in C9PR were converted to alicyclic rings, and its color was reduced from Gardner color grade No. 11 to Gardner color grade No. 0. The optimum Ni/W atomic ratio was found to be close to 0.23, while the optimum Pd/Ru atomic ratio was close to 3.80. The TEM results showed that the morphology and size of sulfide or metal particles of the two kinds of catalysts remained almost unchanged after the reac- tion was carried our for 1 204 hours, attesting to their good catalytic stability.展开更多
This article refers to the first commercial application of upflow residuum hydrotreating serial catalyst, developed by Fushun Research Institute of Petroleum and Petrochemicals (FRIPP), in the residuum hydrotreating u...This article refers to the first commercial application of upflow residuum hydrotreating serial catalyst, developed by Fushun Research Institute of Petroleum and Petrochemicals (FRIPP), in the residuum hydrotreating unit at Shengli refinery of Qilu Petrochemical Company. This catalyst features large pore volume and large pore diameter. The production practice for more than one year has revealed that the domestic upflow residuum hydrotreating catalyst has shown good performance and stability over the whole period of operation despite its high activity at the start of run, and has basically reached the level of similar imported catalyst.展开更多
Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin（C9PR） quality. In this study, the Ni2P/SiO2（containing 10% of Ni） catalyst prepared by the temperature-programmed reductio...Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin（C9PR） quality. In this study, the Ni2P/SiO2（containing 10% of Ni） catalyst prepared by the temperature-programmed reduction（TPR） method was used for hydrogenation of C9 petroleum resins. The effect of reaction conditions on catalytic performance was studied, and the results showed that the optimum reaction temperature, pressure and liquid hourly space velocity（LHSV） was 250 ℃, 6.0 MPa, and 1.0 h-1, respectively. The bromine numbers of hydrogenated products were maintained at low values（250 mg Br/100g） within 300h, showing the high activity and stability of Ni2P/SiO2 catalyst. The fresh and spent catalysts were characterized by X-ray diffraction（XRD）, BET surface area（BET） analysis, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, Fourier transform infrared（FTIR） pyridine adsorption, and X-ray photoelectron spectroscopy（XPS）. Compared with the traditional sulfurated-Ni W catalysts, Ni2P possessed globe-like structure instead of layered structure like the active phase of Ni WS, thereof exposing more active sites, which were responsible for the high activity of Ni2P/SiO2 catalyst. The stability of Ni2P/SiO2 catalyst was probably attributed to its high sulfur tolerance, antisintering, anti-coking and carbon-resistance ability. These properties might be further ascribed to the special Ni-P-S surface phase, high thermal stability of Ni2P nanoparticles and weak surface acidity for the Ni2P/SiO2 catalyst.展开更多
Based on the reaction mechanism of resid hydrodemetallization, a new catalyst carrier was designed and prepared. As compared with the similar type of catalyst carrier, the said new carrier featured a higher pore volum...Based on the reaction mechanism of resid hydrodemetallization, a new catalyst carrier was designed and prepared. As compared with the similar type of catalyst carrier, the said new carrier featured a higher pore volume, a larger pore diameter and a weaker surface acidity, which could improve the diffusion performance and stable reaction performance of the catalyst. The active metal components were loaded on the said carrier by a new technique for better metal dispersion, thus the impurity removal rate of the new catalyst, RDM-3, was improved significantly. The commercial test of the RDM-3 catalyst showed that the process of catalyst preparation was stable, the catalyst performance was slightly better than the catalyst prepared in the lab, therefore, the catalyst could be manufactured in commercial scale.展开更多
The tandem hydrolysis and hydrogenation of saccharides into sorbitol is an especially attractive reaction in the conversion of biomass. Here, an economical and efficient bimetallic catalyst for the transformation of g...The tandem hydrolysis and hydrogenation of saccharides into sorbitol is an especially attractive reaction in the conversion of biomass. Here, an economical and efficient bimetallic catalyst for the transformation of glucose and cellobiose into sorbitol is reported. Non-precious metal based catalysts such as NiCo, Ni, and Co, were prepared via modified impregnation method, and NiCo/HZSM-5 showed superior performance for the synthesis of sorbitol(86.9% from cellobiose, 98.6% from D-glucose).Various characterizations, such as Brunner-Emmet-Teler(BET), X-ray diffraction(XRD), transmission electron microscopy(TEM) and X-ray photoelectron spectroscopy(XPS), confirmed that NiCo alloy formed and highly dispersed in NiCo/HZSM-5 catalyst. The high performance of fabricated catalyst would be attributed to the formation of nickel-cobalt alloy over HZSM-5 zeolite surface. High temperature and H_2 pressure were favorable for the tandem hydrolysis and hydrogenation reaction. Besides,the reaction pathway was also proposed based on the kinetics study. Cellobitol was detected as the intermediate in the reaction mixture. Furthermore, in the catalytic stability study, it was found that active metal species of NiCo/HZSM-5 were stable. The deactivation of catalyst would be due to the covering of acidic sites over NiCo/HZSM-5.展开更多
基金financially supported by the Scientific Research Fund of Zhejiang Provincial Education Department (Y201018517)
文摘Hydrogenation modification is one of the most important ways to produce high-quality petroleum resin. The col- orless C9 petroleum resin （CgPR） was obtained by two-stage catalytic hydrogenation over NiWS/？-A1203 catalyst and PdRu/ y-A1203 catalyst connected in series. Via the hydrogenation reaction, aromatic rings in C9PR were converted to alicyclic rings, and its color was reduced from Gardner color grade No. 11 to Gardner color grade No. 0. The optimum Ni/W atomic ratio was found to be close to 0.23, while the optimum Pd/Ru atomic ratio was close to 3.80. The TEM results showed that the morphology and size of sulfide or metal particles of the two kinds of catalysts remained almost unchanged after the reac- tion was carried our for 1 204 hours, attesting to their good catalytic stability.
文摘This article refers to the first commercial application of upflow residuum hydrotreating serial catalyst, developed by Fushun Research Institute of Petroleum and Petrochemicals (FRIPP), in the residuum hydrotreating unit at Shengli refinery of Qilu Petrochemical Company. This catalyst features large pore volume and large pore diameter. The production practice for more than one year has revealed that the domestic upflow residuum hydrotreating catalyst has shown good performance and stability over the whole period of operation despite its high activity at the start of run, and has basically reached the level of similar imported catalyst.
基金financially supported by the Scientific Research Fund of Zhejiang Provincial Education Department (Y201225114)the Natural Science Foundation of Zhejiang Province (LY13B030006)
文摘Catalytic hydrogenation is an appropriate method for the improvement of C9 petroleum resin（C9PR） quality. In this study, the Ni2P/SiO2（containing 10% of Ni） catalyst prepared by the temperature-programmed reduction（TPR） method was used for hydrogenation of C9 petroleum resins. The effect of reaction conditions on catalytic performance was studied, and the results showed that the optimum reaction temperature, pressure and liquid hourly space velocity（LHSV） was 250 ℃, 6.0 MPa, and 1.0 h-1, respectively. The bromine numbers of hydrogenated products were maintained at low values（250 mg Br/100g） within 300h, showing the high activity and stability of Ni2P/SiO2 catalyst. The fresh and spent catalysts were characterized by X-ray diffraction（XRD）, BET surface area（BET） analysis, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, Fourier transform infrared（FTIR） pyridine adsorption, and X-ray photoelectron spectroscopy（XPS）. Compared with the traditional sulfurated-Ni W catalysts, Ni2P possessed globe-like structure instead of layered structure like the active phase of Ni WS, thereof exposing more active sites, which were responsible for the high activity of Ni2P/SiO2 catalyst. The stability of Ni2P/SiO2 catalyst was probably attributed to its high sulfur tolerance, antisintering, anti-coking and carbon-resistance ability. These properties might be further ascribed to the special Ni-P-S surface phase, high thermal stability of Ni2P nanoparticles and weak surface acidity for the Ni2P/SiO2 catalyst.
文摘Based on the reaction mechanism of resid hydrodemetallization, a new catalyst carrier was designed and prepared. As compared with the similar type of catalyst carrier, the said new carrier featured a higher pore volume, a larger pore diameter and a weaker surface acidity, which could improve the diffusion performance and stable reaction performance of the catalyst. The active metal components were loaded on the said carrier by a new technique for better metal dispersion, thus the impurity removal rate of the new catalyst, RDM-3, was improved significantly. The commercial test of the RDM-3 catalyst showed that the process of catalyst preparation was stable, the catalyst performance was slightly better than the catalyst prepared in the lab, therefore, the catalyst could be manufactured in commercial scale.
基金supported by the National Natural Science Foundation of China (21732006, 21572212)the Strategic Priority Research Program of the CAS (XDB20000000, XDA21060101)+2 种基金Ministry of Science and Technology of China (2017YFA0303502)the Fundamental Research Funds for the Central Universities (WK3530000001)the Major Program of Development Foundation of Hefei Center for Physical Science and Technology (2017FXZY001)
文摘The tandem hydrolysis and hydrogenation of saccharides into sorbitol is an especially attractive reaction in the conversion of biomass. Here, an economical and efficient bimetallic catalyst for the transformation of glucose and cellobiose into sorbitol is reported. Non-precious metal based catalysts such as NiCo, Ni, and Co, were prepared via modified impregnation method, and NiCo/HZSM-5 showed superior performance for the synthesis of sorbitol(86.9% from cellobiose, 98.6% from D-glucose).Various characterizations, such as Brunner-Emmet-Teler(BET), X-ray diffraction(XRD), transmission electron microscopy(TEM) and X-ray photoelectron spectroscopy(XPS), confirmed that NiCo alloy formed and highly dispersed in NiCo/HZSM-5 catalyst. The high performance of fabricated catalyst would be attributed to the formation of nickel-cobalt alloy over HZSM-5 zeolite surface. High temperature and H_2 pressure were favorable for the tandem hydrolysis and hydrogenation reaction. Besides,the reaction pathway was also proposed based on the kinetics study. Cellobitol was detected as the intermediate in the reaction mixture. Furthermore, in the catalytic stability study, it was found that active metal species of NiCo/HZSM-5 were stable. The deactivation of catalyst would be due to the covering of acidic sites over NiCo/HZSM-5.
