Using nickel catalyst supported on aluminum powders, carbon nanotubes （CNTs） were successfully synthesized in aluminum powders by in-situ chemical vapor deposition at 650 ℃. Structural characterization revealed tha...Using nickel catalyst supported on aluminum powders, carbon nanotubes （CNTs） were successfully synthesized in aluminum powders by in-situ chemical vapor deposition at 650 ℃. Structural characterization revealed that the as-grown CNTs possessed higher graphitization degree and straight graphite shell. By this approach, more homogeneous dispersion of CNTs in aluminum powders was achieved compared with the traditional mechanical mixture methods. Using the in-situ synthesized CNTs/Al composite powders and powder metallurgy process, CNTs/Al bulk composites were prepared. Performance testing showed that the mechanical properties and dimensional stability of the composites were improved obviously, which was attributed to the superior dispersion of CNTs in aluminum matrix and the strong interfacial bonding between CNTs and matrix.展开更多
Thermodynamics for chemical vapor synthesis （CVS） of Nb nanopowder in NbCl5-H2-Ar system was investigated by using FactSage software. The validation experiments were conducted to confirm the thermodynamics points. T...Thermodynamics for chemical vapor synthesis （CVS） of Nb nanopowder in NbCl5-H2-Ar system was investigated by using FactSage software. The validation experiments were conducted to confirm the thermodynamics points. The results indicate that under the atmospheric pressure, the reduction approach from NbCl5（g） to Nb（s） is a stage-wise process with the formation of complex sub-chlorides, and is controllable at low hydrogen ratio （mole ratio of n（NbCl5）：n（H2）＆lt;1：180） and low temperature （＆lt;1050 ＆#176;C）. Furthermore, a reasonable amount of inert loading gas is favorable to increase the reduction ratio of NbCl5 and the powder yield. The as-synthesized Nb nanopowder with the homogeneous size of 30-50 nm and the powder yield of 85% （mass fraction） is obtained by the CVS process under n（NbCl5）：n（H2）：n（Ar）=1：120：1 and 950 ＆#176;C with the NbCl5 reduction rate of 96.1%.展开更多
Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water...Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.展开更多
Gas chromatography/mass spectrometry (GC MS) of the essential oil from the aerial parts of Rabdosia lophanthoides resulted in the identification of 108 compounds representing 78.120% of the oil. Hydro distillati...Gas chromatography/mass spectrometry (GC MS) of the essential oil from the aerial parts of Rabdosia lophanthoides resulted in the identification of 108 compounds representing 78.120% of the oil. Hydro distillation of Rabdosia lophanthoides yielded a pale yellow oil. The compounds identified and their relative proportions are listed in Table 1 according to their order of elution on an HP 5MS capillary column. .展开更多
The hydrogen adsorption （storage） studies upon Ni/A1203 nano-composite prepared by metal organic chemical vapor deposition technique （MOCVD） exploiting single source molec ular precursor （SSP） approach were carr...The hydrogen adsorption （storage） studies upon Ni/A1203 nano-composite prepared by metal organic chemical vapor deposition technique （MOCVD） exploiting single source molec ular precursor （SSP） approach were carried out. The Ni/A1203 nano-composite is prepared in cold walled MOCVD reactor by the decomposition of SSP, [H2AI（OtBu）]2, on a substrate holding Ni（acac）2 powder. The SSP is a reducing agent which reduces Ni＋2 to Ni0 and works as source for Al203 matrix in which the Ni0 is dispersed. The resulting Ni/A1203 nano-composite is characterized by XRD, SEM, TEM, and EDX. The hydrogen adsorption （storage） studies are performed using home-made Sievert＇s type apparatus. The hydrogen storage studies reveal that approximately 2.9% （mass ratio） hydrogen can be stored in the Ni/A1203 nano-composite. The results show that Ni/A1203 nano-composite can be a po- tential candidate for hydrogen storage which can be used for onboard fuel purposes.展开更多
We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition （CVD） method using a mixture of methane and hydrogen. Based on a...We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition （CVD） method using a mixture of methane and hydrogen. Based on an analysis of the Fe-C phase diagram, a suitable procedure for the successful synthesis of graphene on Fe surfaces was designed. An appropriate temperature and cooling process were found to be very important in the synthesis of highly crystalline few-layer graphene. Graphene-based field-effect transistor （FET） devices were fabricated using the resulting few-layer graphene, and showed good quality with extracted mobilities of 300-1150 cm2/（V.s）.展开更多
High-quality carbon nanotubes （CNTs） are promising materials in many applications. However, current chemical vapor deposition （CVD） methods for CNT synthesis suffer from the discrepancy between the quality and yie...High-quality carbon nanotubes （CNTs） are promising materials in many applications. However, current chemical vapor deposition （CVD） methods for CNT synthesis suffer from the discrepancy between the quality and yield of CNTs： Low-quality CNTs can be synthesized with high yield, while high-quality CNTs can only be synthesized with low yield. Here a CVD method has been designed to synthesize both high-quality and low-quality CNTs using the same combination of catalyst and precursor. As a result, we were able to understand the reasons for the low yield in high-quality CNT synthesis and a method was derived to improve their yield. This understanding is an important step towards high- yield synthesis of high-quality CNTs.展开更多
Catalyst-free and scalable synthesis of graphene on various glass substrates at low temperatures is of paramount significance to numerous applications such as low-cost transparent electronics and state-of-the-art disp...Catalyst-free and scalable synthesis of graphene on various glass substrates at low temperatures is of paramount significance to numerous applications such as low-cost transparent electronics and state-of-the-art displays. However, systematic study within this promising research field has remained scarce thus far. Herein, we report the direct growth of graphene on various glasses using a low-temperature plasma-enhanced chemical vapor deposition method. Such a facile and scalable approach guarantees the growth of uniform, transfer-free graphene films on various glass substrates at a growth temperature range of 400-600 ℃. The morphological, surface wetting, optical, and electrical properties of the obtained graphene can be tailored by controlling the growth parameters. Our uniform and high-quality graphene films directly integrated with low-cost, commonly used glasses show great potential in the fabrication of multi-functional electrodes for versatile applications in solar cells, transparent electronics, and smart windows.展开更多
To meet the rising demand of graphene in electronics and optoelectronics, developing an efficient synthesis strategy for effective control of the layer thickness is highly necessary. Herein, we report the synthesis of...To meet the rising demand of graphene in electronics and optoelectronics, developing an efficient synthesis strategy for effective control of the layer thickness is highly necessary. Herein, we report the synthesis of strictly single- layer graphene on the foil of an early transition metal, tungsten （W）, via a simple chemical vapor deposition route. The cracking of hydrocarbons is facilitated by the catalytically active metal surface of W, while the subsequent two-dimensional growth is mediated by the carbide-forming ability within the underlying bulk, leading to the formation of uniform monolayer graphene. The as-grown graphene layers can be transferred onto target substrates rapidly through the recently developed electrochemical method, which also allows for reuse of the substrates at least five times without introducing quality deteriora- tion. Moreover, considering the refractory nature of W foils, a complementary component of nickel is added, by means of which the growth temperature of graphene can be significantly reduced. In brief, a highly-efficient and low-cost synthesis route has been developed for the growth of graphene towards large-area uniformity, single-layer thickness and high crystalline quality.展开更多
基金Projects(51071107,51001080,51201056)supported by the National Natural Science Foundation of ChinaProject(2010CB934703)supported by the National Basic Research Program of China+1 种基金Project(13211027)supported by Science and Technology Plan Project of Hebei Province,ChinaProject(2011008)supported by Outstanding Youth Science and Technology Innovation Fund of Hebei University of Technology,China
文摘Using nickel catalyst supported on aluminum powders, carbon nanotubes （CNTs） were successfully synthesized in aluminum powders by in-situ chemical vapor deposition at 650 ℃. Structural characterization revealed that the as-grown CNTs possessed higher graphitization degree and straight graphite shell. By this approach, more homogeneous dispersion of CNTs in aluminum powders was achieved compared with the traditional mechanical mixture methods. Using the in-situ synthesized CNTs/Al composite powders and powder metallurgy process, CNTs/Al bulk composites were prepared. Performance testing showed that the mechanical properties and dimensional stability of the composites were improved obviously, which was attributed to the superior dispersion of CNTs in aluminum matrix and the strong interfacial bonding between CNTs and matrix.
基金Project(51102015)supported by the National Natural Science Foundation of China
文摘Thermodynamics for chemical vapor synthesis （CVS） of Nb nanopowder in NbCl5-H2-Ar system was investigated by using FactSage software. The validation experiments were conducted to confirm the thermodynamics points. The results indicate that under the atmospheric pressure, the reduction approach from NbCl5（g） to Nb（s） is a stage-wise process with the formation of complex sub-chlorides, and is controllable at low hydrogen ratio （mole ratio of n（NbCl5）：n（H2）＆lt;1：180） and low temperature （＆lt;1050 ＆#176;C）. Furthermore, a reasonable amount of inert loading gas is favorable to increase the reduction ratio of NbCl5 and the powder yield. The as-synthesized Nb nanopowder with the homogeneous size of 30-50 nm and the powder yield of 85% （mass fraction） is obtained by the CVS process under n（NbCl5）：n（H2）：n（Ar）=1：120：1 and 950 ＆#176;C with the NbCl5 reduction rate of 96.1%.
基金supported by the Ministry of Science and Technology of China(No.2017YFA0402800)the National Natural Science and Technology of China(No.91541102 and No.51476168)+2 种基金the support by Chinese Academy of Sciences for Senior International Scientists within President’s International Fellowship Initiative(PIFI)programthe financial support during his Ph.D.research stay at Bielefeld UniversityThe Moroccan institute of IRESEN is acknowledged for the financial support(Innowind13 Nanolubricant)
文摘Thin cuprous oxide films have been prepared by chemical vapor deposition(pulsed spray evaporation-chemical vapor deposition)method without post-treatment.The synthesis of cuprous oxide was produced by applying a water strategy effect.Then,the effect of water on the morphology,topology,structure,optical properties and surface composition of the obtained films has been comprehensively investigated.The results reveal that a pure phase of Cu2O was obtained.The introduction of a small quantity of water in the liquid feedstock lowers the band gap energy from 2.16 eV to 2.04 eV.This finding was mainly related to the decrease of crystallite size due to the effect of water.The topology analyses,by using atomic force microscope,also revealed that surface roughness decreases with water addition,namely more uniform covered surface.Moreover,theoretical calculations based on density functional theory method were performed to understand the adsorption and reaction behaviors of water and ethanol on the Cu2O thin film surface.Formation mechanism of the Cu2O thin film was also suggested and discussed.
文摘Gas chromatography/mass spectrometry (GC MS) of the essential oil from the aerial parts of Rabdosia lophanthoides resulted in the identification of 108 compounds representing 78.120% of the oil. Hydro distillation of Rabdosia lophanthoides yielded a pale yellow oil. The compounds identified and their relative proportions are listed in Table 1 according to their order of elution on an HP 5MS capillary column. .
文摘The hydrogen adsorption （storage） studies upon Ni/A1203 nano-composite prepared by metal organic chemical vapor deposition technique （MOCVD） exploiting single source molec ular precursor （SSP） approach were carried out. The Ni/A1203 nano-composite is prepared in cold walled MOCVD reactor by the decomposition of SSP, [H2AI（OtBu）]2, on a substrate holding Ni（acac）2 powder. The SSP is a reducing agent which reduces Ni＋2 to Ni0 and works as source for Al203 matrix in which the Ni0 is dispersed. The resulting Ni/A1203 nano-composite is characterized by XRD, SEM, TEM, and EDX. The hydrogen adsorption （storage） studies are performed using home-made Sievert＇s type apparatus. The hydrogen storage studies reveal that approximately 2.9% （mass ratio） hydrogen can be stored in the Ni/A1203 nano-composite. The results show that Ni/A1203 nano-composite can be a po- tential candidate for hydrogen storage which can be used for onboard fuel purposes.
文摘We demonstrate a simple and controllable way to synthesize large-area, few-layer graphene on iron substrates by an optimized chemical vapor deposition （CVD） method using a mixture of methane and hydrogen. Based on an analysis of the Fe-C phase diagram, a suitable procedure for the successful synthesis of graphene on Fe surfaces was designed. An appropriate temperature and cooling process were found to be very important in the synthesis of highly crystalline few-layer graphene. Graphene-based field-effect transistor （FET） devices were fabricated using the resulting few-layer graphene, and showed good quality with extracted mobilities of 300-1150 cm2/（V.s）.
文摘High-quality carbon nanotubes （CNTs） are promising materials in many applications. However, current chemical vapor deposition （CVD） methods for CNT synthesis suffer from the discrepancy between the quality and yield of CNTs： Low-quality CNTs can be synthesized with high yield, while high-quality CNTs can only be synthesized with low yield. Here a CVD method has been designed to synthesize both high-quality and low-quality CNTs using the same combination of catalyst and precursor. As a result, we were able to understand the reasons for the low yield in high-quality CNT synthesis and a method was derived to improve their yield. This understanding is an important step towards high- yield synthesis of high-quality CNTs.
基金Acknowledgements This work was financially supported by the National Basic Research Program of China （Nos. 2013CB932603, 2012CB933404, 2011CB921903, and 2013CB934600）, the National Natural Science Foundation of China （Nos. 51432002, 51290272, 51121091, 51~201, and 11222434）, the Ministry of Education （No. 20120001130010） and the Beijing Municipal Sdence and Technology Planning Project （No. Z151100003315013）.
文摘Catalyst-free and scalable synthesis of graphene on various glass substrates at low temperatures is of paramount significance to numerous applications such as low-cost transparent electronics and state-of-the-art displays. However, systematic study within this promising research field has remained scarce thus far. Herein, we report the direct growth of graphene on various glasses using a low-temperature plasma-enhanced chemical vapor deposition method. Such a facile and scalable approach guarantees the growth of uniform, transfer-free graphene films on various glass substrates at a growth temperature range of 400-600 ℃. The morphological, surface wetting, optical, and electrical properties of the obtained graphene can be tailored by controlling the growth parameters. Our uniform and high-quality graphene films directly integrated with low-cost, commonly used glasses show great potential in the fabrication of multi-functional electrodes for versatile applications in solar cells, transparent electronics, and smart windows.
文摘To meet the rising demand of graphene in electronics and optoelectronics, developing an efficient synthesis strategy for effective control of the layer thickness is highly necessary. Herein, we report the synthesis of strictly single- layer graphene on the foil of an early transition metal, tungsten （W）, via a simple chemical vapor deposition route. The cracking of hydrocarbons is facilitated by the catalytically active metal surface of W, while the subsequent two-dimensional growth is mediated by the carbide-forming ability within the underlying bulk, leading to the formation of uniform monolayer graphene. The as-grown graphene layers can be transferred onto target substrates rapidly through the recently developed electrochemical method, which also allows for reuse of the substrates at least five times without introducing quality deteriora- tion. Moreover, considering the refractory nature of W foils, a complementary component of nickel is added, by means of which the growth temperature of graphene can be significantly reduced. In brief, a highly-efficient and low-cost synthesis route has been developed for the growth of graphene towards large-area uniformity, single-layer thickness and high crystalline quality.
