A novel horizontal trap-door test system was devised in this study to analyze the face stability of shield tunnels in sands.The test system can be used to investigate both the longitudinal and cross sections of the fa...A novel horizontal trap-door test system was devised in this study to analyze the face stability of shield tunnels in sands.The test system can be used to investigate both the longitudinal and cross sections of the face failure simultaneously at one single apparatus and was employed to perform face stability tests on small-scaled tunnel models at single gravity.The lateral support pressures and failure zones were studied with varying sand materials and earth covers.The results demonstrate that the tunnel face moves back,the lateral active earth pressure on the tunnel face decreases rapidly to a residual value,and the lateral pressure distribution can be categorized into three stages during the failure process:1)initial state;2)pressure dissipation stage;and 3)pressure zone diminution stage.Furthermore,face failure firstly develops from a stable condition to the local failure state,and then continues to develop to the global failure state that can be divided into two sub-zones with different failure mechanisms:rotational failure zone(lower zone)and gravitational failure zone(upper zone).Further discussion shows that under the effects of soil arching,the shape of the gravitational failure zone can adopt arch shaped(most frequent)and column shaped(in shallow tunnels).Limit support pressure for face stability usually appears atδ/D=0.2%−0.5%(ratio of face displacement to tunnel diameter).展开更多
The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the r...The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the region. The integral of pressure results of the hydrodynamic forces, indicate domination in the design of a supercavitating vehicle. An experiment was performed in a water tunnel to investigate the pressure characteristics of the cavity closure region. Ventilation methods were employed to generate artificial cavity, and the ventilation rate was adjusted accordingly to obtain the desired cavity length. An array of pressure transducers was laid down the cavity closure line to capture pressure distribution in this region. The experimental results show that there is a pressure peak in the cavity closure region, and the rise rate of pressure in space tends to be higher in the upwind side when the flow is non-axisymmetric. The transient pressure variations during the cavity formation procedure were also present. The method of measurement in this paper can be referenced by engineers. The result helps to study the flow pattern of cavity closure region, and it can also be used to analyze the formation of supercavitating vehicle hydrodynamics.展开更多
基金Project(51678037)supported by the National Natural Science Foundation of ChinaProject(2015CB057802)supported by the National Basic Research Program of ChinaProject(BLX2015-20)supported by the Fundamental Research Funds for the Central Universities,China。
文摘A novel horizontal trap-door test system was devised in this study to analyze the face stability of shield tunnels in sands.The test system can be used to investigate both the longitudinal and cross sections of the face failure simultaneously at one single apparatus and was employed to perform face stability tests on small-scaled tunnel models at single gravity.The lateral support pressures and failure zones were studied with varying sand materials and earth covers.The results demonstrate that the tunnel face moves back,the lateral active earth pressure on the tunnel face decreases rapidly to a residual value,and the lateral pressure distribution can be categorized into three stages during the failure process:1)initial state;2)pressure dissipation stage;and 3)pressure zone diminution stage.Furthermore,face failure firstly develops from a stable condition to the local failure state,and then continues to develop to the global failure state that can be divided into two sub-zones with different failure mechanisms:rotational failure zone(lower zone)and gravitational failure zone(upper zone).Further discussion shows that under the effects of soil arching,the shape of the gravitational failure zone can adopt arch shaped(most frequent)and column shaped(in shallow tunnels).Limit support pressure for face stability usually appears atδ/D=0.2%−0.5%(ratio of face displacement to tunnel diameter).
基金Foundation item： Supported by the National Natural Science Foundation of China （11172241）, and Northwestern Polytechnical University Foundation for Fundamental Research. （NPU-FFR- 1015）
文摘The most complicated component in cavitating flow and pressure distribution is the flow in the cavity closure line. The cavitating flow and pressure distribution provide critical aspects of flow field details in the region. The integral of pressure results of the hydrodynamic forces, indicate domination in the design of a supercavitating vehicle. An experiment was performed in a water tunnel to investigate the pressure characteristics of the cavity closure region. Ventilation methods were employed to generate artificial cavity, and the ventilation rate was adjusted accordingly to obtain the desired cavity length. An array of pressure transducers was laid down the cavity closure line to capture pressure distribution in this region. The experimental results show that there is a pressure peak in the cavity closure region, and the rise rate of pressure in space tends to be higher in the upwind side when the flow is non-axisymmetric. The transient pressure variations during the cavity formation procedure were also present. The method of measurement in this paper can be referenced by engineers. The result helps to study the flow pattern of cavity closure region, and it can also be used to analyze the formation of supercavitating vehicle hydrodynamics.
