针对经典盲均衡算法收敛速度较慢和稳态误差较大的问题,提出了一种基于变步长恒模算法(Constant Modulus Algorithm, CMA)和判决引导的最小均方(Decision Directed Least Mean Square, DD-LMS)算法的双模式切换盲均衡算法。在算法收敛...针对经典盲均衡算法收敛速度较慢和稳态误差较大的问题,提出了一种基于变步长恒模算法(Constant Modulus Algorithm, CMA)和判决引导的最小均方(Decision Directed Least Mean Square, DD-LMS)算法的双模式切换盲均衡算法。在算法收敛初期采用CMA算法,以确保算法可以较快收敛。在收敛之后切换至DD-LMS算法,以进一步降低稳态误差。通过设定阈值来切换算法,取相邻多次迭代误差的平均值作为算法的切换值,以确保算法切换时机的合理性。另外,引入Softsign变步长函数并加入3个参数对该函数进行改进,使得Softsign变步长函数可以依据不同信道环境设定最佳参数,同时提高算法的收敛速度。仿真结果表明,在卫星通用信道条件下,所提算法的收敛迭代次数约为1 000次,稳态误差为-12 dB,在信噪比为15 dB时,误码率为1×10~(-6)。与相关算法对比,所提算法的收敛速度较高,误码率和稳态误差较低。展开更多
Due to the advantages of low cost,fast response and pollution resistance,digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields.However,digital hydraulic compone...Due to the advantages of low cost,fast response and pollution resistance,digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields.However,digital hydraulic components produce large hydraulic impact at variable moments,which will shorten the service life of mechanical components.Through the simulation analysis of the variable process of digital pump/motor,it is found that the discontinuous flow caused by displacement step changes is the fundamental cause of hydraulic impact.The data analysis results of experimental tests are in good agreement with the simulation analysis results.In view of hydraulic secondary components,a variable control method based on dual-mode operating characteristics is proposed.The TOPSIS algorithm is used to give comprehensive evaluation of the displacement control results after this method.The results show that the control quality of digital pump/motor after adopting the control method has been effectively improved,with an average improvement of about 40%.展开更多
Based on the entangled Fresnel operator （EFO） proposed in [Commun. Theor. Phys. 46 （2006） 559], the optical operator method studied by the IWOP technique （Ma et al., Commun. Theor. Phys. 49 （2008） 1295） is ext...Based on the entangled Fresnel operator （EFO） proposed in [Commun. Theor. Phys. 46 （2006） 559], the optical operator method studied by the IWOP technique （Ma et al., Commun. Theor. Phys. 49 （2008） 1295） is extended to the two-mode case, which gives the decomposition of the entangled Fresnel operator, corresponding to the decomposition of ray transfer matrix [A, B, C, D]. The EFO can unify those optical operators in two-mode case. Various decompositions of EFO into the exponential canonical operators are obtained. The entangled state representation is useful in the research.展开更多
This paper presents a low order stabilized hybrid quadrilateral finite element method for ReissnerMindlin plates based on Hellinger-Reissner variational principle,which includes variables of displacements,shear stress...This paper presents a low order stabilized hybrid quadrilateral finite element method for ReissnerMindlin plates based on Hellinger-Reissner variational principle,which includes variables of displacements,shear stresses and bending moments.The approach uses continuous piecewise isoparametric bilinear interpolations for the approximations of the transverse displacement and rotation.The stabilization achieved by adding a stabilization term of least-squares to the original hybrid scheme,allows independent approximations of the stresses and moments.The stress approximation adopts a piecewise independent 4-parameter mode satisfying an accuracy-enhanced condition.The approximation of moments employs a piecewise-independent 5-parameter mode.This method can be viewed as a stabilized version of the hybrid finite element scheme proposed in [Carstensen C,Xie X,Yu G,et al.A priori and a posteriori analysis for a locking-free low order quadrilateral hybrid finite element for Reissner-Mindlin plates.Comput Methods Appl Mech Engrg,2011,200:1161-1175],where the approximations of stresses and moments are required to satisfy an equilibrium criterion.A priori error analysis shows that the method is uniform with respect to the plate thickness t.Numerical experiments confirm the theoretical results.展开更多
基金Project(51405183)supported by the National Natural Science Foundation of China。
文摘Due to the advantages of low cost,fast response and pollution resistance,digital hydraulic pump/motor can replace conventional variable hydraulic pump/motor in many application fields.However,digital hydraulic components produce large hydraulic impact at variable moments,which will shorten the service life of mechanical components.Through the simulation analysis of the variable process of digital pump/motor,it is found that the discontinuous flow caused by displacement step changes is the fundamental cause of hydraulic impact.The data analysis results of experimental tests are in good agreement with the simulation analysis results.In view of hydraulic secondary components,a variable control method based on dual-mode operating characteristics is proposed.The TOPSIS algorithm is used to give comprehensive evaluation of the displacement control results after this method.The results show that the control quality of digital pump/motor after adopting the control method has been effectively improved,with an average improvement of about 40%.
基金Supported by the National Natural Science Foundation of China under Grant No. 10775097the Research Foundation of the Education Department of Jiangxi Province of China under Grant No. GJJ10097
文摘Based on the entangled Fresnel operator （EFO） proposed in [Commun. Theor. Phys. 46 （2006） 559], the optical operator method studied by the IWOP technique （Ma et al., Commun. Theor. Phys. 49 （2008） 1295） is extended to the two-mode case, which gives the decomposition of the entangled Fresnel operator, corresponding to the decomposition of ray transfer matrix [A, B, C, D]. The EFO can unify those optical operators in two-mode case. Various decompositions of EFO into the exponential canonical operators are obtained. The entangled state representation is useful in the research.
基金supported by National Natural Science Foundation of China (Grant Nos. 11171239 and 11226333)Scientific Research Foundation for the Returned Overseas Chinese Scholars and Foundation for Excellent Young Scholars of Sichuan University (Grant No. 2011SCU04B28)
文摘This paper presents a low order stabilized hybrid quadrilateral finite element method for ReissnerMindlin plates based on Hellinger-Reissner variational principle,which includes variables of displacements,shear stresses and bending moments.The approach uses continuous piecewise isoparametric bilinear interpolations for the approximations of the transverse displacement and rotation.The stabilization achieved by adding a stabilization term of least-squares to the original hybrid scheme,allows independent approximations of the stresses and moments.The stress approximation adopts a piecewise independent 4-parameter mode satisfying an accuracy-enhanced condition.The approximation of moments employs a piecewise-independent 5-parameter mode.This method can be viewed as a stabilized version of the hybrid finite element scheme proposed in [Carstensen C,Xie X,Yu G,et al.A priori and a posteriori analysis for a locking-free low order quadrilateral hybrid finite element for Reissner-Mindlin plates.Comput Methods Appl Mech Engrg,2011,200:1161-1175],where the approximations of stresses and moments are required to satisfy an equilibrium criterion.A priori error analysis shows that the method is uniform with respect to the plate thickness t.Numerical experiments confirm the theoretical results.
