A 500 N model engine filled with LO2/GCH4 was designed and manufactured.A series of ignition attempts were performed in it by both head spark plug and body spark plug.Results show that the engine can be ignited but th...A 500 N model engine filled with LO2/GCH4 was designed and manufactured.A series of ignition attempts were performed in it by both head spark plug and body spark plug.Results show that the engine can be ignited but the combustion cannot be sustained when head spark plug applied as the plug tip was set in the gaseous low-velocity zone with thin spray.This is mainly because flame from this zone cannot supply enough ignition energy for the whole chamber.However,reliable ignition and stable combustion can be achieved by body spark plug.As the O/F ratio increases from 2.61 to 3.49,chamber pressure increases from 0.474 to 0.925 MPa and combustion efficiency increases from 57.8%to 95.1%.This is determined by the injector configuration,which cannot produce the sufficiently breakup of the liquid oxygen on the low flow rate case.展开更多
WT8.BZ]The effects of postgrowth rapid thermal annealing have been studied on the optical properties of 3-nm-height InAs/GaAs quantum dots covered by 3-nm-thick In xGa 1-x As (x=0,0 1 and 0 2) overgrowth layer...WT8.BZ]The effects of postgrowth rapid thermal annealing have been studied on the optical properties of 3-nm-height InAs/GaAs quantum dots covered by 3-nm-thick In xGa 1-x As (x=0,0 1 and 0 2) overgrowth layer.At a higher annealing temperature (T≥750℃),the photoluminescence peak of InGaAs layer has been observed at the lower-energy side of InAs quantum-dot peak.In addition,a similar blueshift in photoluminescence (PL) emission energy is observed for all samples when the annealing temperature increases from 650 to 850℃.However,the trend of photoluminescence linewidth towards narrowing is totally different for InAs quantum dots with different In mole fraction in InGaAs overgrowth layer.The results suggest that the intermixing in the lateral direction plays an important role in obtaining a better understanding of the modification of optical properties induced by the rapid thermal annealing.展开更多
Ignition-assisting agents for densified corn stover briquette fuel(DCBF) were developed,and their ignition and emission characteristics were investigated using type LLA-6 household cooking stove.Three waste liquid fue...Ignition-assisting agents for densified corn stover briquette fuel(DCBF) were developed,and their ignition and emission characteristics were investigated using type LLA-6 household cooking stove.Three waste liquid fuels,waste engine oil(E) ,diesel oil(D) ,and industrial alcohol(A) ,were used as raw materials to make 25 ignitionassisting agents by mixing at different ratios.Their ignition performance was evaluated in terms of ignition time and cost.It was found that ignition-assisting agents ED15(a mix of E and D at volume ratio of 1︰5) and DA51(a mix of D and A at volume ratio of 5︰1) presented better ignition results with shorter ignition time(40-53 s) and lower cost(6.1 and 5.3 cents) at the dosages of 9 ml and 8 ml,respectively.The emission of O2,CO,CO2,NOx,and SO2,the temperature in fume gas,and combustion efficiency were investigated for ED15 and DA51.The results show that the emission of ED15 with the dosage of 9 ml is lower than that of DA51 with the dosage of 8 ml in the ignition process.ED15 at the dosage of 9 ml achieves satisfactory combustion efficiency and emits less pollutant,so it is recommended for practical application.The study will provide a cost-effective and environmentally friendly approach to fast ignite DCBF and break the barrier to the practical application of DCBF.展开更多
In order to discover the effect of head cavity on resonance damping characteristics in solid rocket motors, large-eddy simulations with wall-adapting-local-eddy-viscosity subgrid scale turbulent model are implemented ...In order to discover the effect of head cavity on resonance damping characteristics in solid rocket motors, large-eddy simulations with wall-adapting-local-eddy-viscosity subgrid scale turbulent model are implemented to study the oscillation flow field induced by vortex shedding based on the VKI （yon Karman Institute） experimental motor. Firstly, mesh sensitivity analysis and grid-independent analysis are carried out for the computer code validation. Then, the numerical method is further validated by comparing the calculated results and experimental data. Thirdly, the effects of head-end cavity on the pressure oscillation am-plitudes are studied in this paper. The results indicate that cavity volume, location and configuration have a cooperative ef- fect on the oscillation amplitude. It is proved that Rayleigh criterion can be used as a guiding principle for the design of reso- nance damping cavity. The change of the head-end cavity breaks the balance between the mass flux and acoustic energy. Therefore, the pressure oscillation characteristics change accordingly. It is concluded that a large mass flux added at the pres- sure antinode could attribute to significant amplitude. Meanwhile, the damping effect of the cavity is stronger when the dis- tance between cavity and pressure antinode becomes shorter. Finally, this method is applied to the modification of an engi- neering solid rocket motor. The static test of solid rocket motor reflects that the oscillations can be effectively suppressed by a head-end cavity.展开更多
基金Project(613239)supported by the National Basic Research Program of China
文摘A 500 N model engine filled with LO2/GCH4 was designed and manufactured.A series of ignition attempts were performed in it by both head spark plug and body spark plug.Results show that the engine can be ignited but the combustion cannot be sustained when head spark plug applied as the plug tip was set in the gaseous low-velocity zone with thin spray.This is mainly because flame from this zone cannot supply enough ignition energy for the whole chamber.However,reliable ignition and stable combustion can be achieved by body spark plug.As the O/F ratio increases from 2.61 to 3.49,chamber pressure increases from 0.474 to 0.925 MPa and combustion efficiency increases from 57.8%to 95.1%.This is determined by the injector configuration,which cannot produce the sufficiently breakup of the liquid oxygen on the low flow rate case.
文摘WT8.BZ]The effects of postgrowth rapid thermal annealing have been studied on the optical properties of 3-nm-height InAs/GaAs quantum dots covered by 3-nm-thick In xGa 1-x As (x=0,0 1 and 0 2) overgrowth layer.At a higher annealing temperature (T≥750℃),the photoluminescence peak of InGaAs layer has been observed at the lower-energy side of InAs quantum-dot peak.In addition,a similar blueshift in photoluminescence (PL) emission energy is observed for all samples when the annealing temperature increases from 650 to 850℃.However,the trend of photoluminescence linewidth towards narrowing is totally different for InAs quantum dots with different In mole fraction in InGaAs overgrowth layer.The results suggest that the intermixing in the lateral direction plays an important role in obtaining a better understanding of the modification of optical properties induced by the rapid thermal annealing.
文摘Ignition-assisting agents for densified corn stover briquette fuel(DCBF) were developed,and their ignition and emission characteristics were investigated using type LLA-6 household cooking stove.Three waste liquid fuels,waste engine oil(E) ,diesel oil(D) ,and industrial alcohol(A) ,were used as raw materials to make 25 ignitionassisting agents by mixing at different ratios.Their ignition performance was evaluated in terms of ignition time and cost.It was found that ignition-assisting agents ED15(a mix of E and D at volume ratio of 1︰5) and DA51(a mix of D and A at volume ratio of 5︰1) presented better ignition results with shorter ignition time(40-53 s) and lower cost(6.1 and 5.3 cents) at the dosages of 9 ml and 8 ml,respectively.The emission of O2,CO,CO2,NOx,and SO2,the temperature in fume gas,and combustion efficiency were investigated for ED15 and DA51.The results show that the emission of ED15 with the dosage of 9 ml is lower than that of DA51 with the dosage of 8 ml in the ignition process.ED15 at the dosage of 9 ml achieves satisfactory combustion efficiency and emits less pollutant,so it is recommended for practical application.The study will provide a cost-effective and environmentally friendly approach to fast ignite DCBF and break the barrier to the practical application of DCBF.
基金supported by the National Natural Science Foundation of China(Grant No.51076015)
文摘In order to discover the effect of head cavity on resonance damping characteristics in solid rocket motors, large-eddy simulations with wall-adapting-local-eddy-viscosity subgrid scale turbulent model are implemented to study the oscillation flow field induced by vortex shedding based on the VKI （yon Karman Institute） experimental motor. Firstly, mesh sensitivity analysis and grid-independent analysis are carried out for the computer code validation. Then, the numerical method is further validated by comparing the calculated results and experimental data. Thirdly, the effects of head-end cavity on the pressure oscillation am-plitudes are studied in this paper. The results indicate that cavity volume, location and configuration have a cooperative ef- fect on the oscillation amplitude. It is proved that Rayleigh criterion can be used as a guiding principle for the design of reso- nance damping cavity. The change of the head-end cavity breaks the balance between the mass flux and acoustic energy. Therefore, the pressure oscillation characteristics change accordingly. It is concluded that a large mass flux added at the pres- sure antinode could attribute to significant amplitude. Meanwhile, the damping effect of the cavity is stronger when the dis- tance between cavity and pressure antinode becomes shorter. Finally, this method is applied to the modification of an engi- neering solid rocket motor. The static test of solid rocket motor reflects that the oscillations can be effectively suppressed by a head-end cavity.
