The porosity of titanium foams obtained from the space holder technique was theoretically analyzed in the cases of volume shrinking, retaining and expanding during sintering. The relationship between porosity and spac...The porosity of titanium foams obtained from the space holder technique was theoretically analyzed in the cases of volume shrinking, retaining and expanding during sintering. The relationship between porosity and spacer content was compared under different conditions. The kind of volume change of macropores during sintering was discussed. The results indicate that the relationship between porosity and spacer content depends on the decreased volume of macropores and the volume of micropores in cell-walls in the first case, while the porosity will be greater than the spacer content for the other two cases. It proves that the volume change of macropores during sintering decreases based on theory and practice.展开更多
The subbottom profiling is an important means of marine engineering survey, hazardous geology study and continental shelf scientific research. The accuracy of subbottom profile data interpretation has a direct impact ...The subbottom profiling is an important means of marine engineering survey, hazardous geology study and continental shelf scientific research. The accuracy of subbottom profile data interpretation has a direct impact on the research and investigation results. Because some of profilers’ transducer and hydrophone are separately installed, when the survey area is very shallow, distortion of shallow layers will be caused if it is seen as a self-excited and self-collected single-channel seismic system. According to the principle of subbottom profiler, the distortion correction formula is deduced and analyzed, providing actual value to using C-View software to interpret such subbottom profile data more accurately. In addition, the seabed sediments sound velocity is one of the key parameters when acquiring and processing the subbottom profile data. On the basis of comparing some sound velocity forecasting empirical equations, the LU Bo’s equation was considered the most appropriate to predict the seabed sediments, sound velocity at near-shore of China. In a survey of an artificial island site, the LU Bo’s equation and the porosity data obtained from geological drilling were utilized to predict the sediments sound velocity, and the sound velocity structure profile was plotted, which was applied in processing the subbottom profile data of the artificial island investigation. The method of using porosity data to predict sediments sound velocity in processing subbottom profile data can improve the interpretation accuracy and it’s of practical significance.展开更多
The impact of a rigid body(protected structure) together with cushion material(cellular metal foam) on hard ground from a fixed height was investigated.An analytical one-degree-of-freedom colliding model(ODF-CM) was e...The impact of a rigid body(protected structure) together with cushion material(cellular metal foam) on hard ground from a fixed height was investigated.An analytical one-degree-of-freedom colliding model(ODF-CM) was established to analyze the protection ability and energy absorption by the foam under low velocity impact conditions.For validation,drop hammer experiments were carried out for high porosity closed-cell aluminum foam specimens subjected to low velocity impact loading.The dynamic deformation behavior of the specimen was observed and the velocity attenuation of the drop hammer was measured.The results demonstrated that the aluminum foam had excellent energy absorption capabilities,with its dynamic compressive behavior similar to that obtained under quasi-static loading conditions.Finite element method(FEM) was subsequently employed to obtain stress distributions in the foam specimen.As the propagating period of stress in the specimen was far less than the duration of attenuation,the evolution of the stress was similar to that under quasi-static loading conditions and no obvious stress wave effect was observed,which agreed with the experimental observation.Finally,the predicted velocity attenuation by the ODF-CM was compared with both the experimental measurements and FEM simulation,and good agreements were achieved when the stress distribution was considered to be uniform and the "quasi-static" compressive properties are employed.展开更多
基金Project(51174243)supported by the National Natural Science Foundation of ChinaProject(106112015CDJZR135502)supported by the Fundamental Research Funds for the Central Universities,China
文摘The porosity of titanium foams obtained from the space holder technique was theoretically analyzed in the cases of volume shrinking, retaining and expanding during sintering. The relationship between porosity and spacer content was compared under different conditions. The kind of volume change of macropores during sintering was discussed. The results indicate that the relationship between porosity and spacer content depends on the decreased volume of macropores and the volume of micropores in cell-walls in the first case, while the porosity will be greater than the spacer content for the other two cases. It proves that the volume change of macropores during sintering decreases based on theory and practice.
文摘The subbottom profiling is an important means of marine engineering survey, hazardous geology study and continental shelf scientific research. The accuracy of subbottom profile data interpretation has a direct impact on the research and investigation results. Because some of profilers’ transducer and hydrophone are separately installed, when the survey area is very shallow, distortion of shallow layers will be caused if it is seen as a self-excited and self-collected single-channel seismic system. According to the principle of subbottom profiler, the distortion correction formula is deduced and analyzed, providing actual value to using C-View software to interpret such subbottom profile data more accurately. In addition, the seabed sediments sound velocity is one of the key parameters when acquiring and processing the subbottom profile data. On the basis of comparing some sound velocity forecasting empirical equations, the LU Bo’s equation was considered the most appropriate to predict the seabed sediments, sound velocity at near-shore of China. In a survey of an artificial island site, the LU Bo’s equation and the porosity data obtained from geological drilling were utilized to predict the sediments sound velocity, and the sound velocity structure profile was plotted, which was applied in processing the subbottom profile data of the artificial island investigation. The method of using porosity data to predict sediments sound velocity in processing subbottom profile data can improve the interpretation accuracy and it’s of practical significance.
基金supported by the National Basic Research Program of China ("973" Project)(Grant No. 2011CB610305)the National "111" Project of China (Grant No. B06024)the National Natural Science Foundation of China (Grant Nos. 10825210,11072188)
文摘The impact of a rigid body(protected structure) together with cushion material(cellular metal foam) on hard ground from a fixed height was investigated.An analytical one-degree-of-freedom colliding model(ODF-CM) was established to analyze the protection ability and energy absorption by the foam under low velocity impact conditions.For validation,drop hammer experiments were carried out for high porosity closed-cell aluminum foam specimens subjected to low velocity impact loading.The dynamic deformation behavior of the specimen was observed and the velocity attenuation of the drop hammer was measured.The results demonstrated that the aluminum foam had excellent energy absorption capabilities,with its dynamic compressive behavior similar to that obtained under quasi-static loading conditions.Finite element method(FEM) was subsequently employed to obtain stress distributions in the foam specimen.As the propagating period of stress in the specimen was far less than the duration of attenuation,the evolution of the stress was similar to that under quasi-static loading conditions and no obvious stress wave effect was observed,which agreed with the experimental observation.Finally,the predicted velocity attenuation by the ODF-CM was compared with both the experimental measurements and FEM simulation,and good agreements were achieved when the stress distribution was considered to be uniform and the "quasi-static" compressive properties are employed.
