Diesel spray is injected at high pressure. So, upper stream region of spray is high Weber number condition. However, even if the fuel is injected at high pressure, the downstream region of spray is corresponding to re...Diesel spray is injected at high pressure. So, upper stream region of spray is high Weber number condition. However, even if the fuel is injected at high pressure, the downstream region of spray is corresponding to relatively low Weber number condition. Thus, KH （Kelvin-Helmholtz） model modeled for high Weber number conditions and MTAB （modified Taylor analogy breakup） model are used for primary and secondary breakup processes respectively. This study is focused on the development of new hybrid breakup model The calculations are performed by LES （large eddy simulation） incorporated into KIVA code. LES of non-evaporating diesel spray are performed using KH ＆ RT （Rayleigh-Taylor） model, MTAB model and KH-MTAB model. Then, LES with these models were compared with experimental results. As the result, the availability of KH-MTAB model is showed. It is found that KH-MTAB is good agreement with experimental results of penetration and SMD （Sauter mean diameter） in relatively low density conditions.展开更多
文摘Diesel spray is injected at high pressure. So, upper stream region of spray is high Weber number condition. However, even if the fuel is injected at high pressure, the downstream region of spray is corresponding to relatively low Weber number condition. Thus, KH （Kelvin-Helmholtz） model modeled for high Weber number conditions and MTAB （modified Taylor analogy breakup） model are used for primary and secondary breakup processes respectively. This study is focused on the development of new hybrid breakup model The calculations are performed by LES （large eddy simulation） incorporated into KIVA code. LES of non-evaporating diesel spray are performed using KH ＆ RT （Rayleigh-Taylor） model, MTAB model and KH-MTAB model. Then, LES with these models were compared with experimental results. As the result, the availability of KH-MTAB model is showed. It is found that KH-MTAB is good agreement with experimental results of penetration and SMD （Sauter mean diameter） in relatively low density conditions.
